Liebert PB Series User Manual

Dear Customer,

Please accept our thanks for giving us the privilege to serve you by
choosing a Liebert make ‘UPS’.

If this is your first Liebert UPS, we hope it is the beginning of a long
relationship which delivers value to your organisation. If you already
own and use a Liebert product, we are doubly honoured by your decision
of continuing this relationship.

It is our constant endeavor to partner you for the growth and success of
your business. This philosophy is reflected in our Mission statement

“To deliver value through Air & Power Quality solutions to achieve
customer delight”. Please do give us feedback to help us realize our

Mission.

Emerson Network Power (India) Private Limited

IMPORTANT

This manual contains information concerning the installation, operation and
maintenance of the Powerbank UPS.

All relevant parts of the manual should be read prior to commencing installation.

This UPS has been designed for Commercial / Industrial use only.

This UPS has not been designed for direct use in any life support application.

If you encounter any problem with the procedures contained in this manual you
should seek immediate assistance from Emerson Network Power (India) Pvt. Ltd.
Sales Office from whom the equipment was purchased. Alternatively contact the
Emerson Network Power (India) Pvt. Ltd. Customer Service & Support department
at the address shown below:

EMERSON NETWORK POWER (INDIA) PRIVATE LIMITED

Plot No. C-20, Road No. 19,

Wagle Industrial Estate,
Thane - 400 604, INDIA.

Phone : [phone]

5828405

Fax : [phone]

5828358

Emerson Network Power (India) Private Limited pursues a policy of continual product
development and reserves the right to change the equipment without notice.

@ Copyright 2001 by Emerson Network Power

Unauthorized reproduction prohibited

All rights reserved

ZONAL OFFICES

MUMBAI

B 414-424, Bhaveshwar Arcade,(opp. Shreyas cinema),

LBS Road,Ghatkopar(W), MUMBAI - 400 086

Tel : [phone]

Fax : [phone] Pager : 9623-988 000

Mobile : [phone]

NEW DELHI

18/14, WEA, Pusa Lane, Karol Buag;

NEW DELHI 110 005.

Tel : [phone],

5744774, 5757601 Pager : 9632-100 300

KOLKATA

77 A, Raja Basant Roy Road,

KOLKATA - 700 029

Tel : 033 - 4646387, 4647197

Fax : [phone]

BANGALORE

15-17-19, Sri Lakshmi Complex, 3rd floor;
St. Mark’s Road, BANGALORE - 560 001.

Tel : (080) - 55994543, 5598825, 5581448

Pager : (080) 96239888000 Fax : 080 - 558 8546

EMERSON NETWORK POWER (INDIA) PRIVATE LIMITED

Plot No. C-20, Road No. 19,

Wagle Industrial Estate,
Thane - 400 604, INDIA.

Phone : [phone]

5828405

Fax : [phone]

5828358

REGISTERED AND HEAD OFFICE

BARODA

39/2, Arunodaya Society,
Alkapuri, BARODA-390 005

Tel : [phone], 330383
Fax : [phone], 330383

CHANDIGARH

SCO-198 / 199 / 200,
Sector - 34A, Near Labour Chowk,
CHANDIGARH

Phone : [phone]
Mobile : [phone]

CHENNAI

No. 22, First Floor,
Gopal Krishna Road,
T. Nagar, CHENNAI - 600 017.

Tel : [phone]
Fax : [phone]

COCHIN

Lakshmini No. 36 / 2684,
Veluthamma House, Azad Road,
Kaloor, COCHIN - 682017
Tel : 0484 - 341985
Fax : 0484 - 341986

GOA

622 / A, La Citadel Colony
Dona Paula, GOA - 403 004
Tel : c/o. 0832 - 220 723

GUWAHATI

South Savania, Ashram Road,
Ulubari, GUWAHATI 781 007
Tel : 0361 - 543848
Fax : 0361 - 543270
Mobile : [phone]

BRANCH OFFICES

JAMSHEDPUR

Kashi Kunj, Road No. 2, Gr. Floor
Contractor’s area, Bistupur;
JAMSHEDPUR - 831 001

Tel : 0657 - 437549
Fax : 0657 - 437549

LUCKNOW

206, Sriram Tower, Ashok Marg
LUCKNOW

Phone : [phone]
Pager : 9628 - 555091
Mobile : [phone]

NAGPUR

203, Ganga Apts.,
13, Giripeth
NAGPUR 400 010.

Phone / Fax : 0712 - 540423, 548551

PUNE

B-6, Shri Dwarka co-op. Society,
467/C1, Hare Krishna Mandir Path,
Model Colony, Off University Road,
PUNE - 411006

Tel : 020 - 5676975, 5670709
Fax : 020 - 4004020

SECUNDARABAD

Plot No. 4, Sardar Patel Road
SECUNDARABAD - 500 003.

Tel : 040 - 7717263, 7719196
Fax : 040 - 7806502

Powerbank Online UPS

PB Series - 3kVA/6kVA

User Manual

EMERSON NETWORK POWER (INDIA) PRIVATE LIMITED

5

INDEX

SECTION DESCRIPTION PAGE NO.
1 IMPORTANT SAFETY 6

INSTRUCTIONS

2. INTRODUCTION 8

3. INSTALLATION 10

4. CONTROL & INDICATION 13

5. OPERATING INSTRUCTIONS
A. DETAILED PROCEDURE 16
B. STARTUP PROCEDURE / 18

QUICK REFERENCE

6. TESTING THE UPS 20

7. OPERATION 21

8. MAINTENANCE 22

9. SPECIFICATION OF UPS 24

6

1. IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS ----------

This manual contains important instructions that should be followed
during installation and maintenance of the UPS and batteries. All of
the data contained in this manual is very important to the proper
operation and long term reliability of the UPS. Please read this manual
thoroughly before attempting to unpack install, and operate the UPS.

1.1 WARNING

1. To reduce the risk of fire or electric shock, install UPS and
batteries in a temperature and humidity controlled indoor area
which is free of conductive contaminants.

2. Risk of electric shock, Do not remove cover. No user
serviceable parts inside. Refer servicing to qualified service
personnel.

3. Risk of Electric shock---- Battery circuit is not isolated from ac
input, hazardous voltage may exist between battery terminals
and ground. Test before touching.

4. Risk of electric shock. Hazardous live parts inside this UPS are
energized from the battery supply even when the input ac power
is disconnected.

5. To reduce the risk of fire, replace only with same type and rating
of fuse.

1.1 Important Safeguards

Your UPS has been engineered and manufactured to assure your
personal safety, but improper use can result in potential electric shock
or fire hazards. To maintain the safeguards incorporated in this unit
observe the following basic rules :

* Turn off and disconnect your UPS from the utility before

cleaning. Do not use liquid cleaners or aerosol cleaners. A
damp cloth may be used to remove any dust or smudges which
occur on the outer surface of your UPS.

7

* Do not install or operate your UPS near water.
* Do not locate your UPS on an unstable cart, stand or table.
* Move the UPS and its supporting cart, stand or table with care.

Quick stops, excessive force and uneven surface may cause the
UPS and its support to overturn.

* Openings on the sides of the UPS cabinet must not be blocked

or covered and air flow through the Openings must not be
obstructed.

* Your UPS should be operated only from the type of power

source indicated on the marking label. For operating form
battery power, refer to the operating instructions (Section - 6).

* Follow all warnings and instructions marked on your UPS.
* Do not overload the commercial ac outlet and/or extension wires

used with your UPS.

* Never push objects of any kind into the UPS cabinet opening or

spill liquid of any kind on your UPS.

* Do not attempt to service the UPS yourself, as there are no

user serviceable components inside. Refer all servicing to
qualified service personal.

Turn off and disconnect your UPS from the utility, and contact qualified
service personal under the following conditions :-

* If liquid has been spilled on the UPS.
* If the UPS has been exposed to rain or water.
* If the UPS does not operate normally by following the operating
instructions.
* If the UPS has been dropped or the cabinet has been damaged.
* When the UPS experiences a distinct change or degradation of
service.

8

2. INTRODUCTION

2.1 Purpose of your Uninterruptible Power System

(UPS)

This Uninterruptible Power System is designed to provide a continuous
supply of usable 220 Volt AC as power to computer and other
electronic equipments during irregularities or failures of commercial AC
power. The UPS protects against AC power line irregularities such as
blackouts, sags, spikes and electromagnetic and radio frequency
interference.

When commercial AC line voltage levels are acceptable, the UPS
operates with very high efficiency, filters noise and spikes before the
power is delivered to its load (s). Should the commercial AC
experience irregularities or fail completely, the UPS supplies a
continuous sine-wave AC load power by utilizing the battery-fed
inverter. The UPS will supply a load of 3000/5000/6000VA UPS from
its external battery bank. The UPS provides AC power protection,
allowing continued operating though most commercial power
disturbances and an opportunity to secure data and safely shut down
systems in the event of an extended outage.

2.2 FEATURES OF THE UPS

The UPS system is designed to provide commercial AC power
protection for computers, peripherals and equipment used in business,
office and laboratory environments. Their performance and features
have been designed to ensure the utmost in AC power protection for
the load (s) as well as ease of use and unobtrusive operation. The
features include :

* Detection of AC utility blackouts and sags
* Spike suppression
* Attractive office styling
* Automatic restart after low battery shutdown
* Easily accessible front panel controls
* Inverter overload protection
* Computer interface card
* Audible alarm
* Cold-start feature
* Optional shutdown software support.
* Built in input over voltage protection