Liebert OpenComms Web Card User Manual

Liebert Intellislot® Web Card

Quick Start Guide

INSTALL

• Locate the Intellislot option bay on your Liebert equipment—You
might need to remove a plastic cover.

• Insert the IntelliSlot Web Card into the Intellislot bay.

• Secure the card with the supplied screws.

• Connect an Ethernet cable.

DHCP: The card ships with DHCP service enabled. The MAC
address is printed on a sticker affixed to the top of the card.

OR

Static IP: To assign a static IP address, use the

Service Terminal to configure the card. Proceed
to Steps 2 & 3.

CONNECT THE CABLE

• Locate the blue serial configuration cable (null
modem) that shipped with the card.

• Connect the configuration cable to the DB-9 port
on the card and to a COM port on your PC.

CONFIGURE THE CARD

• Use terminal emulation software,
such as HyperTerminal
direct connection to the card.

Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None

™

, to open a

•Press Enter for the Main Menu,
above right.

• Select option 2 and follow the
instructions to enter an IP
ADDRESS, NETMASK and GATE­WAY.

•Press Esc to return to the Main
Menu.

• Enter X and press Enter to exit
HyperTerminal and save your changes.

NOTE

When installing the card in a Liebert NX™, configure the
communication port of NX to 2400 baud. Refer to the NX user
manual for instructions.

User Manual

This Quick Start Guide is designed to give you the information you
need to install and configure the Liebert Intellislot Web Card. A full
user manual, SL-52615, is available online at www.liebert.com.
Liebert highly recommends that new users consult the user manual.

Web Support

The Intellislot Web Card delivers
Web management and control to
Liebert equipment. All users on
your network will be able to view
status information. Control and
configuration capabilities are
protected by a username and
password combination. The
default username is “Liebert”
and the default password is also
“Liebert.”

You can change the password
from the Web or from the service
terminal.

WARNING: Change the
username and password today to
prevent unauthorized access.

SNMP Support

The Liebert Intellislot Web Card
enables SNMP management of
Liebert equipment. To integrate
the card into your SNMP
implementation, you will need to
compile the Liebert Global
Products MIB on your network
management station (NMS).
The Liebert Global Products MIB
is included in this package on

CD-ROM and supports both
Windows and Unix file formats.

Liebert OpenComms Nform
Support

Utilizing the SNMP and Web
technologies built into each of
the Intellislot Web cards, Liebert
OpenComms Nform will
centrally manage alarm
notifications to provide you with
an easy interface to access
critical system information.

A downloadable edition is
available online
at nform.liebert.com.

Liebert MultiLink™ Support

The Liebert Intellislot Web Card
installed in a UPS may be used
with Liebert MultiLink software,
providing unattended, graceful
operating system shutdown. The
card can be monitored by
MultiLink over the network,
eliminating the need for serial
cables.

Downloadable versions of
MultiLink and information about
MultiLink are available online at

multilink.liebert.com

Technical Support/ Service

Web Site

www.liebert.com

Monitoring

800-222-5877
[e-mail]
Outside the US: 614-841-6755

Locations

United States

1050 Dearborn Drive
P.O. Box 29186
Columbus, OH 43229

SL-52600_REV07_04-08

Locations

Europe

Via Leonardo Da Vinci 8

Zona Industriale Tognana

35028 Piove Di Sacco (PD) Italy

[phone]

Fax: [phone]

Asia

7/F, Dah Sing Financial Centre

108 Gloucester Road, Wanchai

Hong Kong

852 25722201

Fax: [phone]