LIDL US HG734TX User Manual

BIKE COMPUTER /
D
U
COMPUTADORA PARA BICICLET A
BIKE COMPUTER
Operation and Safety Notes
COMPUTADORA PARA BICICLETA
Instrucciones de utilización y de seguridad
IAN 286004
US-EN
5
6
4
3
1
2
8
C
5 2
4
A
6
9
3
7
3
86
1
DB
6
2
E
6
F
2
G
1
H J
(max. 2 mm)
1 6
0,079 in
I
6
1
21
20
19
18
17
16
22
10
11
12
13
1415
K
L
8
5
D U
20 in 1598 mm
in 1759 mm
22 24 in 1916 mm 26 in (650 A) 2073 mm 26,5 in (Tubular) 2117 mm 26,6 in (700 x 25C) 2124 mm
in (700 x 28C) 2136 mm
26,8 27 in (700 x 32C) 2155 mm 28 in (700B) 2237 mm ATB24 in x 1,75 1888 mm ATB26 x1,4 1995 mm ATB26 x1,5 2030 mm ATB26 x1,75 2045 mm ATB26 x 2 (650B) 2099 mm 27 in x 1 2138 mm
in x 1 1 / 4 2155 mm
27
NM
DESCRIPTION OF
SIGNAL WORDS
WARNING indicates a hazardous situation that, if not a result in deat
NOTICE indicates informatio important, but not message
s related to property damage).
voided, could
h or serious injury.
n considered
hazard related (e.g.
US-EN
CUSTOMER SERVICE
Call customer service at
1 (844) 543-5872
Visit the Website Customer
Service Platform at
www.lidl.com/contact-us
Visit a LIDL store for further assistance.
IAN 286004
Please have your IAN number ready.
US-EN
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip
ment
and receiver.
• Connect the equipment into an outlet on a dif­ferent circuit from the circuit the receiver is connected to.
US-EN
Bike Computer
Introduction
Congratulations on your purchase. You have selected a quality product. The instructions for use are a part of the product. They contain important information about the safety, use and disposal of the product. Before using the product, please learn about all the safety information and usage instructions. Only use the product as described and for the specifi ed appli­cations. If you lend the product to someone else, please also give all the instructions.
Proper use
The product is intended for use as a bike computer. Not for commercial use.
US-EN
• Consult the dealer or an experienced radio / TV technician for help.
This product complies
with part 15 of the FCC Rules. Operation is sub­ject to the following two conditions:
(1) This product may not
cause harmful interfer­ence, and
US-EN
Functions
– Menu languages: GB, DE, FR, NL, IT, ES – Clock – Stopwatch – Temperature °C / °F – Memory function for min. and max. temperature – Current speed (0–62 mph (0–99.9 km / h)) – Average speed (0–62 mph (0–99.9 km / h)) – Maximum speed (0–62 mph (0–99.9 km / h)) – Speed comparison – Speed tendency – Trip timer (max. 9:59:59) (count backwards or
forwards) – Odometer (count backwards or forwards) – Total odometer and total cycling time display – Calories – Fat-burnt – CO2 saving
US-EN
(2) this product must
accept any interference received, including inter­ference that may cause undesired operation.
Please note that the
warranty does not cover damage arising from improper treatment,
US-EN
– Scan indicator (functions displayed in
continuous loop)
– Backlight
Description of parts
Magnet
1
Cable tie
2
Battery
3
Cushion for bike computer bracket
4
Bracket
5
Sensor
6
Bike computer’s battery compartment cover
7
Bike computer
8
Sensor battery compartment cover
9
Primary function value display
10
Function indicator
11
Secondary function value display
12
LC display
13
MODE button (M)
14
SET button (S)
15
non-observance of the operating instructions and safety advice or unauthorised use.
The RF Exposure Com­pliance distance is 20 mm.
US-EN
US-EN
Speed comparison indicator:
16
Compares your current speed against the
average speed ▲ higher than your average speed ▼ lower than your average speed
SCAN indicator
17
Servicing interval indicator
18
Battery state indicator
19
Speed tendency indicator:
20
Indicates speed trend Acceleration – anticlockwise rotation Deceleration – clockwise rotation
Down button (-)
21
Up button (+)
22
Technical data
Battery: 3 V (Direct current)
Operating temperature: 0–122 °F (0–50 °C)
IP44 (splash proof): Suitable for wet locations
(CR2032 button cell)
US-EN US-EN US-EN US-EN US-EN US-EN US-EN US-EN
Safety instructions for batteries / rechargeable batteries
DANGER TO LIFE!
Keep batteries / recharge­able batteries out of reach of children. If accidentally swallowed seek immedi­ate medical attention.
US-EN US-EN US-EN US-EN US-EN US-EN US-EN US-EN
Model: HG00734A-TX, HG00734B-TX FCC-ID: 2AJ9O-HG734TX Model: HG00734A-RX, HG00734B-RX
Included items
1 Bike computer 1 Bracket for bike
computer
1 Cushion for bike
computer bracket 1 Bracket with sensor 1 Magnet
6 Cable ties 2 Batteries 3 V
(Direct current), type CR2032 button cell
2 Spare seal ring for bike
computer and sensor
1 Operating instructions
DANGER OF
EXPLOSION!
Never recharge non-re-
chargeable batteries. Do not short-circuit bat­teries / rechargeable batteries and / or open them. Overheating, fi re or bursting can be the result.
IMPORTANT SAFETY INSTRUCTIONS
This product is not
intended
for use by persons (includ-
READ ALL INSTRUCT
IONS. KEEP FOR FUTURE REFER­ENCE. IF PASSING THIS PRODUCT ON TO A THIRD PARTY ALSO INCLUDE ALL DOCUMENTS.
ing children) with reduced physical, sensory or men­tal capabilities, or lack of experience and knowl­edge, unless they have been given supervision or instruction concerning use of the product by a
Never throw batteries /
rechargeable batteries into fi re or water.
Do not exert mechanical
loads to batteries / rechargeable batteries.
emperatures, which could aff ect batteries / rech able batteries, e.g. radi­ators / direct sunlight.
Avoid contact with the
skin, eyes and mucous
arge-
t
membranes. In the event
Risk of leakage of batteries / recharge­able batteries
Avoid extreme environ-
of contact with battery acid, thoroughly fl ush the aff ected area with plenty of clean water
person responsible for their safety. Children should be supervised to ensure that they do not play with the product.
Changes or modifi ca-
tions to this product not expressly approved by the party responsible for
and seek immediate medical attention.
WEAR PROTEC­TIVE GLOVES!
Leaked or damaged bat-
teries / rechargeable bat­teries can cause burns on contact with the skin. Wear suitable protective gloves at all times if such an event occurs.
compliance could void the user‘s authority to operate the product.
Note: This product has
been tested and com
plies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
In the event of a leakage
of batteries / rechargeab batteries, immediately remove them from the prod­uct to prevent damage.
Only use the same type
of batteries / recharge­able batteries. Do not mix used and new bat­teries / rechargeable batteries.
le
mental conditions and
interference in a residen­tial installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no
guarantee that
Remove batteries /
rechargeable batteries if the product will not be used for a longer period.
Risk of damage of the product
Only use the specifi ed
type of battery / rechargeable battery!
Insert batteries / rechar-
geable batteries
interference will not occur in a particular installation. If this prod­uct causes harmful inter­ference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try and correct the interference
according to polarity marks (+) and (-) on the battery / rechargeable battery and the product.
Clean the contacts on
the battery / recharge­able battery and in the battery compartment before inserting!
Remove exhausted
batteries / rechargeable
batteries from the product immediately.
SAVE THESE INSTRUCTIONS
Before use
Note: Remove all packaging materials from the
product.
Remove the protective foil from the LC display before fi rst use. Note: This product is not recommended to use with E-bikes. Interference from the motor may aff ect the performance of the product.
Press the SET button 15 and keep it pressed
for 3 seconds to reset the maximum speed dis­play to 0.
AVGSPEED: Average speed
Press the SET button 15 and keep it pressed
for 3 seconds to reset the average speed dis­play to 0.
TEMP: Thermometer
Press the SET button 15 and keep it pressed
for 3 seconds to switch between °C and °F.
Press the SET button 15 to display the highest
temperature (HI) measured so far.
Press the SET button 15 again to display the
lowest temperature (LO) measured so far.
Press the SET button 15 and keep it pressed
while the highest or lowest temperature is dis­played to switch back to the current tempera­ture to reset the saved data.
STPWATCH: Stopwatch
Press the SET button 15 to start the stopwatch.
13
US-EN
US-EN US-EN US-EN
Inserting the battery
To insert the battery 3, proceed as shown in Fig. A. To open the battery compartment cover, use a
coin to assist you to turn the battery compartment cover in anti-clockwise direction. Make sure you fi t the battery the right way round (polarity). This is shown on the back side of the product.
To close the battery compartment cover, use a
coin to assist you to turn the battery compart-
ment cover in clockwise direction.
Scan the QR code with your smartphone and watch the video to fi nd out how to assem­ble the product.
Attaching the bike computer
To attach the product, proceed as shown in
Figs. B to I.
Press the SET button 15 again to stop the stop-
watch.
Press the SET button 15 and keep it pressed
for 3 seconds to reset the stopwatch to 0. CAL RATE: Current calorie consumption CALORIE: Calorie meter
Press the SET button 15 and keep it pressed
for 3 seconds to reset the calorie counter to 0. FAT-BURN: Fat burning in grams
Press the SET button 15 and keep it pressed for
3 seconds to reset the fat burning value to 0. CO2 KG: CO2 Saving:
Press the SET button 15 and keep it pressed
for 3 seconds to access the CO2 saving refer-
ence value. KM: Odometer
Press the SET button 15 and keep it pressed
for 3 seconds to change the odometer settings.
The LC display
shows the symbol for
13
US-EN
US-EN
Note: Make sure that the bike computer 8 is attached with less than to the sensor
within a 30 ° angle as shown in Fig. B.
sor
6
27.56 in (70 cm) distance
. Fix the bike computer 8 to the sen-
6
Preparing for use
Basic settings
Basic setting: Language > User profi le > Wheel
size > Unit of distance and speed > Age > Unit of weigh > Weight > Time format > Time > CO2 saving > Servicing interval > Unit of temperature
Key functions: MODE button for selection / + button SET button for edit and confi rmation
Note: The LC display approx. 2 seconds after the battery You are immediately off ered a choice of languages.
TIME: Timer
or – button 21 for setting values /
22
comes on automatically
13
counting forwards or backwards (+ or - respec­tively) and 5-digit number.
Press the SET button 15 for edit. Press the + button 22 and – button 21 repeat-
edly until the desired symbol is shown.
Press the MODE button 14 to move on to set-
ting the distance on the odometer and press the + button the desired number appears as the fi rst digit. Repeat this process for all the remaining digits.
Confi rm your choice by pressing the SET button
15
current page.
Press the SET button 15 and keep it pressed
for 3 seconds to change the timer settings. The LC display shows the symbol for counting for­wards or backwards (+ or - respectively) and 5-digit number.
and – button 21 repeatedly until
22
and press the MODE button 14 back to
is inserted.
3
US-EN
US-EN
Press the Set button 15 for edit. Press the + button 22 or – button 21 repeatedly
until the desired language appears.
Confi rm your choice by pressing the SET
Press the MODE button 14 to move to the user
Press + button 22 or – button 21 repeatedly
Confi rm your choice by pressing the SET
Press the MODE button 14 to move to the wheel
P
Press the MODE button 14 to move on to setting
Confi rm your choice by pressing the SET button
SCAN: Scan Note: The scan mode automatically switches between the trip distance, highest speed, average speed and trip time displays. Note: Refer to the section on “Basic settings” to see how you make or change settings. Note: To turn off the SCAN function, press the + button
.
button
15
profi le and press the SET button
until the desired user profi le (ADVANCE or EASY) appears.
.
button
15
size (SET WS). A four-digit number appears in the LC display. Now enter the tyre circumference of your wheel in mm. Press the SET button for edit and press + button repeatedly until the desired number appears as the fi rst digit. Confi rm your choice by pressing
ress the SET button 15 enter the setting proc Press the + button edly until the desired symbol is shown.
the timer and press the + button
repeatedly until the desired number
ton
21
appears as the fi rst digit. Repeat this process for all the remaining digits.
and press the MODE button 14 back to
15
current page.
to return to clock mode.
22
22
and – button 21 repeat-
22
for edit.
15
and – but-
22
15
US-EN
ess.
US-EN
or – button 21
the MODE button all the remaining digits.
Confi rm your choice by pressing the
SET button
Note: You can calculate your tyre circumfer-
ence (U) by multiplying your tyre diameter (D) by 3.1416 (Fig. M). The list (Fig. N) contains the tyre circumferences (U) of the most common tyre diameters (D).
Press the MODE button 14 to move to the unit
of distance and press the SET button edit. Press the + button repeatedly until SET KM KMH or SET MILE MPH appears in the LC display.
Confi rm your choice by pressing the SET
Press the MODE button 14 to move to the age.
.
button
15
A two-digit number appears in the LC display. Press the SET button + button
22
. Repeat this process for
14
.
15
22
for edit and press the
15
or – button 21 repeatedly until
CUSTOMIZE mode
Apart from the ADVANCE and EASY mode, you can make your individual adjustments in the CUSTOMIZE mode (see procedure).
Press the Set button 15 to enter the
CUSTOMIZE mode.
Note: By repeatedly pressing the + button
and – button ADVANCE and EASY mode. In the EASY mode, press and hold the SET button the + button settings on or off (e.g. time). Choose “On”, to add the chosen adjustment to the EASY modes. Choose “Off “, if you do not want to add the adjustments.
Press the SET button 15, to confi rm your entry.
Repeat this process for another function.
, you can toggle between the
21
and – button 21 to switch the
22
15
or – button 21
. Press
15
the desired number appears as the fi rst digit. Confi rm your choice by pressing the MODE
. Repeat this process for the remain-
button
14
ing digit.
Confi rm your choice by pressing the
SET button
Press the MODE button 14 to move to the unit
of weight and press the SET button Press the + button until SET KG or SET LB appears in the LC display.
for
US-EN US-EN US-EN US-EN US-EN US-EN US-EN US-EN
22
Confi rm your choice by pressing the
SET button
Press the MODE button 14 to move to weight.
A three-digit number appears in the LC display. Press the SET button + button the desired number appears as the fi rst digit. Confi rm your choice by pressing the MODE button remaining digits.
.
15
or – button 21 repeatedly
22
.
15
for edit and press the
15
or – button 21 repeatedly until
22
. Repeat this process for all the
14
for edit.
15
Using the backlight
Press the SET button 15 to switch on the back-
light temporarily. The backlight automatically extinguishes after a short period.
Confi rm your choice by pressing the
SET button
Press the MODE button 14 to move to the time
format and press the SET button Press the + button edly until 12 Hr (12-hour format) or 24 Hr (24-hour format) appears in the LC display.
Confi rm your choice by pressing the
SET button
Press the MODE button 14 to move to the clock.
A four-digit number appears in the LC display. Press the SET button + button the desired number appears as the fi rst digit. Confi rm your choice by pressing the MODE button remaining digits.
Confi rm your choice by pressing the
SET button
.
15
or – button 21 repeat-
22
.
15
for edit and press the
15
or – button 21 repeatedly until
22
. Repeat this process for all the
14
.
15
for edit.
15
Resetting the bike computer
Press the MODE button 14 and + button 22
at the same time and keep them pressed until RESET appears in the LC display
Now press the SET button 15. This allows you
to adjust the previously set basic setting data (language, age, weight, time). The rest of the stored data will be deleted.
.
13
US-EN
Press the MODE button 14 to move to CO2
saving. A three-digit number appears in the LC display. Press the SET button and press the + button repeatedly until the desired number appears as the fi rst digit. Confi rm your choice by press­ing the MODE button for all the remaining digits.
Confi rm your choice by pressing the
SET button
Press the MODE button 14 to move to the ser-
vicing interval. A three-digit number appears in the LC display. Press the SET button and press the + button repeatedly until the desired number of units of distance to your next intended bicycle servicing (servicing interval indicator LC display. Confi rm your choice by pressing the MODE button the remaining digits.
15
22
14
.
22
. Repeat this process for all
14
for edit
15
and – button 21
. Repeat this process
for edit
15
or – button 21
) appears in the
18
Changing the batteries
Note: The battery of the bike computer must be
replaced when the battery state indicator on the LC display
Press the MODE button 14 and the SET button
at the same time and keep them pressed
15
until the battery symbol and {{----}} appears in the LC display
To replace the battery, proceed as shown in
fi gure A.
To open the battery compartment cover, use a
coin to assist you to turn the battery compart­ment cover in anti-clockwise direction. Take out the old battery and replace with a new battery. Make sure you fi t the battery the right way round (polarity). This is shown inside the battery com­partment.
Adjust the sealing ring before inserting the
battery.
.
13
.
13
appears
19
Note: You have the choice of 0-620.75 miles
(0–999 km) or miles. After the setting is confi r the bike computer will count the trip distance. When the servicing interval indicator on LC display, you need to check the condition of your bike (wear, adjustment of brakes, etc.). Then press the down button service interval and this indicator to disappear. The bike computer will start counting the trip distance again.
Confi rm your choice by pressing the
SET button
Press the MODE button 14 to move to the unit
of temperature and press the SET button edit. Press the + button 22 or – button 21 r edly until °C or °F appears in the LC display.
Confi rm your choice by pressing the
SET button
Press the MODE button 14 to close the setting
page.
To close the battery compartment cover, use a
coin to assist you to turn the battery compartm cover in clockwise direction.
Press any button and keep it pressed to return
to normal operating mode.
Note: Once the battery is removed, all stored data will be erased after approx. 20 seconds.
.
15
.
15
21
shows
18
to reset the
15
epeat-
med,
for
ent
Removing the bike computer
from the bike
Turn the bike computer anticlockwise to detach
the bike computer.
Cut off the protruding tails of the cable ties 2
with a suitable tool such as diagonal pliers.
Troubleshooting
Note: This product has delicate electronic compo-
nents. Therefore interference may occur when it is near products which transmit radio signals.
You have now completed the basic settings. If you want to change the basic setting data, follow the steps in “Resetting the bike computer” section and reset all basic setting data again.
Connect the bike computer
and sensor
Use the magnet 1 to trigger the sensor 6, the speed tendency indicator indicate a successful connection. Now the bike computer follow the steps in “Changing the batteries” section and reset all basic setting data again. You will need to re-connect the bike computer and sensor
is ready for use. If connection fails,
8
again.
6
will show a graph to
20
8
Using the bike computer
Note: If the bike computer remains unused for
more than 5 minutes, it automatically switches into the stand-by mode. Press any button or
- If errors occur in the display, remove any such prod­ucts from the vicinity of the product. In the case of such malfunctions, remove the battery briefl y and then reinsert again.
Problem Solution
Empty LC-display or no response after putting the batteries in again
Remove battery. Insert a sharp object (e.g. screwdriver) into the hole marked with “RESET”. Insert a 3 V battery into the battery compartment in such a way that the + terminal points upwards. Replace the battery cover on the battery compart­ment. The microprocessor is reset and restarted.
US-ENUS-ENUS-EN
any vibration made to reactivate the computer. The function indicator 11 shows the current mo
Press the + button 22 or MODE button 14
repeatedly to page through the various modes.
Press the SET button 15 to change into the sec-
ondary function for any function.
Press the SET button 15 and keep it pressed to
call or reset up any saved values.
The bike computer has the following functions:
ADVANCE mode: CLOCK > TOTALODO > TOTAL-TM > TRIPDIST > MAXSPEED > AVGSPEED > TRIPTIME > TEMP > STPWATCH > CAL RATE > CALORIE > FAT-BURN > CO2 KG > KM+/- > TIME+/- > SCAN
EASY mode: Press the MODE button display: TRIPDIST > MAXSPEED > AVGSPEED > TRIPTIME
Problem Solution
Speed or distance are not displayed.
Display is black The ambient temperature
The LC-display shows irregular symbols.
you can choose function
14
Adjust magnet and sensor correctly.
- Check that the battery is inserted with the poles arranged the right way round.
is too high or the bike computer was exposed to direct sunlight for too long. Remove product from direct sunlight and let it cool off for a while.
Remove battery and replace it again.
de.
Using functions
Note: All the functions and secondary functions
are described in the following list. CLOCK: Displays the time
Press the SET button 15 and keep it pressed
for 3 seconds to access the time settings.
TOTALODO: Total odometer
Press the SET button 15 and keep it pressed
for 3 seconds to access the wheel size settings, total distance and servicing interval.
TOTAL-TM: Total time cycling
Press the SET button 15 and keep it pressed
for 3 seconds to make changes to the saved total time cycling.
TRIPDIST: Trip distance
Press the SET button 15 and keep it pressed
for 3 seconds to reset the trip distance, the average speed and the trip time displays to 0.
MAXSPEED: Maximum speed
Cleaning and care
Do not use any liquids or cleaning agents for
cleaning. Otherwise there is a risk of damaging the product.
The product should only be cleaned on the
outside with a soft, dry cloth.
Maintenance
Remove the battery when the product will not
be used for longer period of time.
Check regularly the cable and components for
any damage and safe fi t.
US-ENUS-EN
Disposal
Dispose of the packaging through
your local recycling facilities and in compliance with all federal, state and local regulations.
Contact your local waste management authority for additional information on how to dispose of the used product.
To help protect the environment, please dispose of the product properly when it has reached the end of its useful life, do not throw in the garbage. Infor­mation on collection sites and their opening hours is available from your local authority.
Improper disposal of batteries can damage the environment!
286004_cri_Fahrradcomputer_660x444mm_US.indd 1 31.03.17 10:39
Never throw batteries in the garbage. They may contain toxic heavy metals and must be handled as special waste. The chemical symbols of heavy met­als are: Cd = cadmium, Hg = mercury, Pb = lead. Used batteries should therefore be disposed of through a local collection point.
Warranty
What does this warranty cover?
The warranty covers:
· Damage, breakage or inoperability due to defect.
· Damage not accounted for by normal wear and tear or following the safety and maintenance instructions provided in the user manual.
What is not covered by the warranty?
The warranty does not cover damage caused by:
· Normal wear and tear of the product, including fragile parts (such as switches, glass, etc.);
· Improper use or transport;
· Disregarding safety and maintenance instructions;
· Accidents or acts of nature (e.g. lightning, fi re, water, etc.).
· Tampering with the product (such as removing cover, unscrewing screws etc.)
What is the period of coverage and warranty resolution?
The warranty is for 3 years from the date of purch At our discretion, product will either be refunded or replaced.
What will we not do?
We will not:
tart a new warranty period upon product exchange;
· S
· We will not repair product.
How to process the warranty?
We recommend fi rst either:
ase.
US-ENUS-ENUS-EN
· Call customer service at 1 (844) 543-5872
· Visit the Website Customer Service Platform at www.lidl.com/contact-us
· Visit a LIDL store for further assistance
To ensure the quickest warranty return process, please have the following available:
· The original sales receipt that includes the date purchased;
· The product and manual in the original package;
· A statement of the problem.
What must you do to keep the warranty in effect?
· Retain the original receipt;
· Follow all product instructions;
· Do not repair or modify the product.
How does state law relate to this warranty?
Any State Laws that contradict or modify the warra listed here to the consumer’s benefi t will be followed.
US-ENUS-EN
nty
Distributed by / Distribuido por:
Lidl US LLC., Arlington, VA 22202
Model No. / Modelo Núm.:
HG00734A / HG00734B
Version / Versión: 02 / 2017
Made in / Hecho en: China
Last Information Update · Estado de las informaciones: 03 / 2017 · Ident.-No.:
HG00734A / B-US032017-9
Loading...