LIDL US 783TX User Manual
Description of signal words .................................................................Page 6
Customer service .........................................................................................Page 6
Introduction .....................................................................................................Page 7
Intended use .......................................................................................................Page 7
Parts and features ..............................................................................................Page 7
Contents ..............................................................................................................Page 9
Technical data ....................................................................................................Page 9
Important safety notes ............................................................................Page 10
Safety warnings for batteries ............................................................................Page 12
Assembly ...........................................................................................................Page 15
Preparing for use ........................................................................................Page 15
Inserting / replacing the batteries ......................................................................Page 15
Synchronizing transmitter / receiver ..................................................................Page 16
Setting the signal type .......................................................................................Page 17
Setting the volume ..............................................................................................Page 18
Selecting the chime ............................................................................................Page 18
Connecting the transmitter to existing bell systems or an existing
doorbell button ...................................................................................................Page 19
Connecting the transmitter to an existing bell system ......Page 19
Connecting an existing doorbell button ......................................Page 20
Troubleshooting ...........................................................................................Page 20
Cleaning and maintenance ...................................................................Page 21
Disposal .............................................................................................................Page 21
Three year limited warranty ...............................................................Page 22
320257_silv_Design-Funktuerklingel_content_US.indd 5 01.03.19 12:13
5 US-EN
DESCRIPTION OF SIGNAL WORDS
WARNING indicates a hazardous
situation that, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous
situation that, if not avoided, could
result in minor or moderate injury.
NOTICE indicates information con-
sidered important, but not hazard
related (e.g. messages related to
property damage).
CUSTOMER SERVICE
Call customer service at 1 (844) 543-5872
Visit the Website Customer Service Platform at
www.lidl.com/contact-us
Visit a LIDL store for further assistance.
IAN 320257
Please have your IAN number ready.
320257_silv_Design-Funktuerklingel_content_US.indd 6 01.03.19 12:13
6 US-EN
Wireless Doorbell
Introduction
Congratulations on your purchase. You have selected a quality product.
The instructions for use are a part of the product. They contain important information about the safety, use and disposal of the product. Before using the product, please learn about all the safety information
and usage instructions. Only use the product as described and for the
specified applications. If you lend the product to someone else, please
also give all the instructions.
Intended use
This product is intended for the wireless transmission of the doorbell
signal. The product is not intended for commercial use.
Receiver: Indoor use only
Transmitter: Outdoor use (IP44)
Parts and features
Receiver
1
Signal indicator
2
Speaker
320257_silv_Design-Funktuerklingel_content_US.indd 7 01.03.19 12:13
7 US-EN
3
Signal type selector button (acoustic, optical, optical and acoustic
signal)
4
Melody selection button
5
Volume / Synchronization button
6
Battery compartment cover
7
Hanger
8
Battery compartment
Transmitter
9
Chime button
10
Name plate
11
Lock
12
Holder (for wall mounting)
13
Battery compartment
14
Inner cover
Mounting
15
Screw
16
Rubber cover
17
Screw
18
Dowel
19
Cable exit hole
20
Cable holder
320257_silv_Design-Funktuerklingel_content_US.indd 8 01.03.19 12:13
8 US-EN
Contents
1 Transmitter
1 Receiver
3 Batteries 1.5 V
1 Battery 3 V
(direct current), type AA (receiver)
(direct current), type CR2032 (transmitter)
3 Screws (for transmitter and for mounting the receiver on a wall)
3 Dowels
5 Name plates (for the doorbell)
1 Set of operating instructions
Technical data
Model No: HG00783A-TX, HG00783A-RX
HG00783B-TX, HG00783B-RX
FCC ID: 2AJ9O-783TX
Range: 492 ft. (150 m) (unobstructed area)
Transmission frequency: 434 MHz
Transmission power: <10 dBm
Battery types: Receiver: 3 x 1.5 V
(type AA / LR6),
Transmitter: 1 x 3 V
(type CR2032)
Receiver: Audible signal volume (at maximum volume
setting): 73 dB (at a distance of 3.2 ft
(1 m) from the device)
(direct current)
(direct current)
320257_silv_Design-Funktuerklingel_content_US.indd 9 01.03.19 12:13
9 US-EN
Ingress protection rating of the transmitter: IP44 (splash water
proof)
IMPORTANT
SAFETY NOTES
READ ALL INSTRUCTIONS. KEEP FOR FUTURE REFERENCE. INCLUDE ALL DOCUMENTATION WHEN PASSING THIS PRODUCT
ON TO OTHERS.
Failure to observe the following warn-
ings may result in death or serious injuries.
DANGER TO LIFE AND RISK OF ACCIDENTS FOR IN-
FANTS AND CHILDREN! Never leave children unsupervised
with the packaging material. There is always a risk of suffocation
if children play with the packaging material. Children frequently
underestimate the dangers. Always keep children away from the
packaging material. This product is not a toy.
This product is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the product by a person responsible
for their safety. Children should be supervised to ensure they do
not play with the product.
320257_silv_Design-Funktuerklingel_content_US.indd 10 01.03.19 12:13
10 US-EN
Changes or modifications to this product not expressly approved
by the party responsible for compliance could void the user‘s
authority to operate the product.
Note: This product has
been tested and com
plies with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide rea
sonable protection a
gainst
harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with
the instructions, may caus
e
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this product causes harmful interference
to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation
between the equip
ment and receiver.
• Connect the product into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for
help.
This product complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This product may not cause harmful interference, and
(2) this product must accept any interference received, including
interference that may cause undesired operation.
320257_silv_Design-Funktuerklingel_content_US.indd 11 01.03.19 12:13
11 US-EN
Please note that the warranty does not cover damage due to
abuse, failure to observe the instructions for use and safety notes
or unauthorized use.
The RF exposure compliance distance is 0.79 in (20 mm).
Safety warnings for
batteries
When used correctly, cells and batteries provide a safe and dep
able source of portable power. However, if they are misused or
abused, this may result in leakage, burns, fire, or explosion.
Store batteries in a dry place at room temperature. Batteries are
sensitive to high and low temperatures. Such thermal exposure
may lead to leakage, fire, or explosion.
Keep cells and batteries out of reach of children, especially small
batteries. Ingestion may lead to choking or acute and serious per-
sonal injury.
Keep cells or batteries clean and dry both during use and storage.
Wipe metal terminals with a soft, dry cloth if they become dirty.
Immediately seek medical attention if a cell or battery has been
swallowed. Also, contact your local poison control center.
In the event that the electrolyte comes into contact with the skin or
eyes, immediately flush with fresh water for at least 15 minutes
and seek medical attention.
Store unused batteries in their original packaging or in safe place
and away from metal objects that may short-circuit them.
end-
320257_silv_Design-Funktuerklingel_content_US.indd 12 01.03.19 12:13
12 US-EN
Exercise care in handling batteries in order to prevent shorting with
conducting materials, such as rings, coins, bracelets, and keys. The
battery or the conductor can overheat and cause burns, leakage,
fire, or explosion.
Clean the battery contacts and also those of the product prior to
battery installation. Keep the contacts clean.
Remove batteries from the product that will not be used for an
extended period of time (months or longer).
Remove discharged batteries from product promptly to avoid
possible damage from leakage.
Choose the proper battery for the intended application.
Always take care to correctly insert batteries observing (+) and (-)
polarity marks on the battery and the product for which it is int
ended.
Proper polarity must be observed to avoid damage to either product
or batteries.
Always replace the whole set of batteries at one time, taking care
not to mix old and new ones, or batteries of different types, capacities
or manufacturers.
Never heat batteries in order to revive them.
Never charge a battery unless the battery label specifically states
the battery is rechargeable. Charging a non-rechargeable battery,
may result in leakage, fire, or explosion.
Do not open or mutilate a battery or cell. Electrolyte from the cell
is corrosive and can cause damage to the eyes or skin. The cell
contents can also be hazardous if ingested.
Do not drop or subject the cell or battery to strong mechanical
shock.
,
320257_silv_Design-Funktuerklingel_content_US.indd 13 01.03.19 12:13
13 US-EN
Batteries should not be disassembled, crushed, punctured, or
otherwise mutilated. Such abuses may result in leakage, fire, or
explosion.
Do not dispose of the battery in a fire. Failure to observe this
precaution may result in an explosion.
Dispose of batteries properly and in accordance with government
regulations.
WARNING
Chemical Burn Hazard.
This product contains lithium button / coin cell batteries.
Dispose of button / coin cell batteries properly. Keep them
Keep batteries away from children.
0-5
DANGER if swallowed
If a new or used lithium button / coin cell battery is swallowed
or enters the body, it can cause severe internal burns and can
lead to death in as little as 2 hours. Always completely secure
the battery compartment. If the battery compartment does not
close securely, stop using the product, remove the batteries,
and keep it away from children. If you think batteries might
have been swallowed or placed inside any part of the body,
seek immediate medical attention.
away from children. Even used cells may cause injury.
320257_silv_Design-Funktuerklingel_content_US.indd 14 01.03.19 12:13
SAVE THESE INSTRUCTIONS
14 US-EN
Assembly
Note: You will need a screwdriver and a drill to assemble the product.
Note: Only use the screws and dowels supplied for the assembly of
the product.
Mount the receiver (see Fig. D).
Mount the transmitter (see Fig. E).
Preparing for use
For first time use, please remove the protective film from the name
plate of the transmitter and insert your name plate into the recess
on the transmitter.
Replace the protective film on the transmitter.
Inserting / replacing the batteries
Insert the batteries to provide power to the product before preparing
it for use.
Use the indicated battery types only. Failure to observe this advice
may result in product damage.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
320257_silv_Design-Funktuerklingel_content_US.indd 15 01.03.19 12:13
15 US-EN
Receiver (see Fig. B):
Remove the battery compartment cover 6 from the back of the
receiver.
Remove the used battery, if present.
Insert 3 batteries (1.5 V (direct current), type AA).
Note: Ensure correct polarity. This is indicated in the battery
compartment
8
.
Close the battery compartment cover 6.
Transmitter:
Remove the name plate from the holder 12 by pressing the lock
11
and remove the rubber cover 16 (see fig. C1).
Remove the used batteries, if present (see fig. C2).
Insert a battery (3 V (direct current), type CR 2032). The side
marked “+” must face up.
Re-install the rubber cover 16, close the holder 12 of the transmitter
on to the back of the product.
Fasten the holder, and place screw
15
of the transmitter back on
to the back of the product & name plate.
The transmitter battery compartment with the holder must be in-
stalled using the screw
15
while in use. If the holder is damaged,
stop using the product.
Synchronizing transmitter / receiver
The product works on 434 MHz which is a quite common frequency.
To ensure that the function is not influenced by doorbells in the
320257_silv_Design-Funktuerklingel_content_US.indd 16 01.03.19 12:13
16 US-EN
neighborhood, the transmitter and the receiver have to be synchronized
via encryption. Every transmitter functions with a different signal encryption.
Synchronize the transmitter and receiver as follows:
As soon as the batteries are installed, the receiver enters synchro-
nizing mode for 1 minute. During synchronizing mode, the signal
indicator
1
steadily lights up blue.
You can also manually enter synchronizing mode by holding the
synchronizing button
5
for 3 seconds.
The signal indicator 1 on the receiver will steadily light up for
1 minute, to indicate that the receiver is in synchronizing mode.
Press the chime button 9 of the transmitter, while the receiver is
in synchronize mode. If the receiver receives the signal, the steady
blue light of the signal indicator
1
flickers 6 times to indicate
that the synchronization is successful.
Setting the signal type
The receiver can indicate the reception of a door signal either both
optically and acoustically, or only acoustically, or only optically.
Using the signal type selector button 3, select whether the signal
is to be indicated both optically and acoustically or acoustically
or optically.
Press the signal type selector button 3 once. An acoustic signal
will sound and afterward the signal indicator
ceiver will now indicate the door signal acoustically and optically.
1
will flash. The re-
320257_silv_Design-Funktuerklingel_content_US.indd 17 01.03.19 12:13
17 US-EN
Loading...