LichtLogistik LED Support theREALthing#1 User Manual
„theREALthing#1“ Manual
„theREALthing#1“ Manual / Overview
Notice
© LichtLogistik LED Support GmbH, All Rights Reserved
Information and specifications in this document are subject to change without notice. LichtLogistik LED Support GmbH assumes no
responsibility or liability for any errors or inaccuracies that may appear in this manual. Trademarks used in this text: „LichtLogistik LED
Support GmbH" and „theREALthing#1“ are registered trademarks.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their
products. LichtLogistik LED Support GmbH disclaims any proprietary interest in trademarks and trade names owned by others.
NOTICE OF INTELLECTUAL PROPERTY RIGHTS
„theREALthing#1“ is protected by trademark patents.
Contacting LichtLogistik LED Support GmbH
LichtLogistik LED Support GmbH
Bergstraße 73
93138 Lappersdorf
Deutschland
Tel: +49 941 8305882
www.lichtlogistik.de
Mail: info@licht-logistik.de
Important Safety Information
Instructions pertaining to continued protection against fire, electric shock,
and injury to persons are found throughout this manual.
Please read all instructions prior to assembling, mounting,
and operating this equipment.
„theREALthing#1“ Manual / Technical Data
Specifications Umbrella
Material : Textile impregnated with flame retardant (Florimp K Verde), Black/silver, B1
Size : Diameter: 148cm, Length: 90cm!
Depth incl. Manfrotto-Stud: 42cm
On request: Material in black/gold or black/whiteb
Diameter 100cm or 180cm
Specifications LED-Core:
Material: Plexiglas GS, Kömaprint
IC Type: SMD SK6812 RGBW
DC In: 5VDC
IP rating: IP20 / indoor use only
Screws: M3
Weight: 800g
LED Type: 201 PCs 4in1 SMD 5050 LED
Specifications LED-Controller:
Material: Aluminium black
PSU: Meanwell
max. Power: 75W
Input Voltage: 230VAC
Output Voltage: 5VDC
Schutzart: IP40 / indoor use only
Power In: Neutrik True1 input/output
DMX In/Out: Neutrik 5pol XLR male/female
Loading...