Libtor T270-A1, T270-B1, T270-DE1, T270-DE2, T260 Series User Manual

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd Page 1 of 43

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804

Mail:[e-mail]

T260Sseries Router

user manual

Product Version

Page

V1.5
Product name: T270

Total:43

T270 series router

user manual

The manual is suitable for the following model :

Model

Product type

T270-A1

WCDMA/HSDPA/HSUPA/HSPA+/GSM/GPRS/EDGE router

T270-B1

CDMA/EVDO router

T270-DE1

TD-LTE/FDD-LTE/WCDMA
/TD-SCDMA/GSM/GPRS/EDGE router

T270-DE2

TD-LTE/FDD-LTE/WCDMA
/TD-SCDMA/WVD0/CDMA20001X/GSM router

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd Page 2 of 43

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804

Mail:[e-mail]

Copyright owned and kept by Shenzhen Libtor Technology Co,Ltd (2008-2016).

Any Company and Individual mustn’t use and copy the part and complete content and
broadcast in any form without permission from company.

Trade mark declaration

Libtor and Other Libtor trademarks are owned and controlled by Shenzhen LIBTOR
Technology Co.ltd

The Trademark and Registered trademark mentioned above are owned by related
person.

Notice

Regarding to product version updating and the other reasons, this file’s content will
be updating based on research and development results .It is only used for instruction
unless otherwise stipulated .All declarations, information and suggestions included in
this files can’t make up with any forms of guarantee.

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd Page 3 of 43

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804

Mail:[e-mail]

Content

Chapter 1: Product specification ……………………………………………….5

1.1 Product description …………………………………………………………..5

1.2 Connector description…………………………………………………………6

Chapter 2 Setting preparation…………………………………………………..9

2.1 connecting equipment………………………………………………………….9

2.1.1 Set computer ‘s IP address………………………………………………..9

2.1.2 Connection by WiFi ………………………………………………………9

2.1.3 Confirm computer connection with router ………………………………...9

2.2 router login ……………………………………………………………………10

2.2.1 login …………………………………………………………………………10

2.2.2 enter web setting …………………………………………………………….10

2.3 T270 storage function …………………………………………………………11

Chapter 3 Working mode ……………………………………………………….17

3.1. 3Gwireless router mode ……………………………………………………….17

3.2 Wire connection standard router mode ………………………………………...18

3.2.1 Static internet connection mode …………………………………………….18

3.2.2 Dynamic internet connection way………………………………………….19

3.2.3 PPPoE internet connection way ……………………………………………19

3.3 Wireless AP+ Customer end bridge mode ……………………………………20

3.4 wireless AP+Customer end mode……………………………………………….23

Chapter 4 …………………………………………………………………………..23

4.1 Wireless safety ………………………………………………………………….24

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd Page 4 of 43

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804

Mail:[e-mail]

4.1.1 Open system …………………………………………………………………..24

4.1.2 WPA …………………………………………………………………………..25

4.1.3 WPA-PSK …………………………………………………………………..26

4.1.4 WPA2-PSK ………………………………………………………………….27

4.1.5 WPAPSKWPA2PSK ……………………………………………………….27

Charpter5 System service …………………………………………………………28

5.1 Virtual service ………………………………………………………………….28

5.2 Serial Port ………………………………………………………………….......29

5.3 SMS service …………………………………………………………………....30

5.4 Web Ads Certification …………………………………………………….…...31

Charpter 6 Admin……………………………………………………………….…32

6.1 Equipment function …………………………………………………………..32

6.2 Software updating ………………………………………………………….….32

6.3 Default to factory value …………………………………………………….…33

6.4 Password management………………………………………………………...33

Supplement ……………………………………………………………………….34

T270 Serial Port manual sepcification ……………………………………………35

T270 as customer end and realize serial data transmission………………………..36

T270 is used as server and realize remote data transsimission ……………………39

The use of T260S Virtual Server (port mapped)…………………………………..42

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd Page 5 of 43

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804

Mail:[e-mail]

Chapter 1: Product specification

T270 industrial wireless router communication products which are based on 3G and
4G internet requirements and developed by Shenzhen LBITOR Technology co.ltd.
They are mainly applied for data transmission of industrial users and support for
transparent data transmission, picture transmission , equipment monitoring and
Wireless router internet functions.

T270 use 32 bit processor , it can process protocols and a large amount of data with
a high speed . It also can match with many types of industrial module for 3G /4G
internet .(3G:WCDMA/EVDO/TD-SCDMA, 4G:TD-LTE/FDD-LTE ) .Providing
10/100M ethernet network interface ,WIFI wireless connector ,serial port ,USB
connector for connecting many kinds of terminal equipments .

Supporting Web configuration, easy management and remote message control .

1.1 Product description

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd Page 6 of 43

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804

Mail:[e-mail]

1.2 Connector description

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd Page 7 of 43

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804

Mail:[e-mail]

Front side :

1:indicator ( details listed below)

3: USB connector (USB2.0&USB3.0)

4: Reset button

4:SIM/UIM card slot

Back side :

1: 3G/4G Antenna (3G/4G ATN1, 3G/4G/GPS ANT2)

2: WiFi Antenna (WIFI ANT1,WIFI ANT2)

3: UART connector: default type is R232 connector. You need to customized if you
need R485 connector.

4: LAN1/LAN2: RJ45 connector, LAN1 can be used as WAN port if LAN1 is in the
standard router mode.

5: DC connector: 2.1mm standard round-head connector and 5.08 connection line port
with self lock, Inner”+”.Outer:”-“，the Voltage Output is 6-35V， the power is larger
than 10W。

Indicator state specification

Name

State

Description

System
light(SYS)

Constant
light

Constant light when power supplied, It shows power supply
is normal.

Flash
slowly

The light state will change from constant light to flash
slowly which it takes about ten seconds when connect
electricity

Flash
quickly

1.The SYS light will flash quickly when it approach preset
cashflow value.

2.The SYS light will flash quickly when press reset button
for 5 seconds. Then system will restart later.

Connection
Internet light

(LINK)
Constant

light

Connection successful

Flash
slowly

Normal connection

Power
off

No connection

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd Page 8 of 43

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804

Mail:[e-mail]

LAN1、LAN
2 light

Constant
light

Already connected RJ45 port

Power
off light

Disconnect RJ45 port

Power light
(power)

Constant
light

Power supply normal

Power
off

No power supply

WIFI light
Constant
light

Establish WIFi network successfully

Power
off light

Close WIFI network

USB light
Constant
light

It can be normal use when system detect storage aleady

Power
off light

System can’t detect storage

Reset button use method

SYS light (SYS) will be flashing quickly when long press RESET button for 5 seconds , the

system resets successfully when router restarting.

Serial port’s usage

T270 only open UART1 as standard RS232 serial port for external use . (The URAT
connector can’t be used for external use if T270 add GPS function.)

Power connector

T260S offer 2.1 mm standard circle hole and 5.08 selflocked connect line port poewr supply
way. The inner part of electrodes is positive pole and the outer part of electrodes is
negative pole .Power supply voltage ranged from 5to 35 voltage .We suggest using 12
voltage to supply power. The power suppy should be equal or larger than 10 W.

Antenna connector

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd Page 9 of 43

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804

Mail:[e-mail]

T260S has four SMA antenna connectors . It responds to 3G/4G. WIFI antenna accordingly.
User can choose suitable outer shape and antenna automatically. The Bigger antenna gain ,
the more effecter of wireless sending and receiving in theory . We advise using 3 -5DB
antenna gain under 3G/4G antenna. WiFi antenna’s choice is based on the requirement of
user coverage .Our Product support 15DB antenna gain at the maximum .

Chapter 2 Setting preparation

2.1 connecting equipment

You can connect your computer and router as below procedure.

2.1.1 Set computer ‘s IP address.

Before access to the web setting, we advise you to setting your computer into obtain
IP address and DNS IP address automatically. Router can assign IP address
automatically. If you want to assign static IP address to the computer , you need to set
your computer and router of LAN port IP address into a same subnet .( The default
IP address is 192.168.10.1 for LAN port of router , Subnet mask is 255.255.255.0)

2.1.2 Connection by WiFi

Check your Wifi router’s wireless internet connection, then click“connection”
button to create connection, Wifi password :12345678

2.1.3 Confirm computer connection with router

Pls use Ping order to confirm if the computer connect with router or not when your
computer monitor successfully connected with IP.

For example :Proceed Ping order under Windows XP environment :Ping192.168.10.1

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd Page 10 of 43

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804

Mail:[e-mail]

If LCD display as below, it means computer and router successfully connected.

2.2 router login

2.2.1 login

Then login Web setting configuration of router .

Click http://192.168.10.1 in the address field of web browser , then click the user
name and password in pop-up window

The defaulted user name is admin and password is admin when you login at the first
time to use .

2.2.2enter Web setting

Enter web setting when you successfully login , Then you can set and management
router .

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd Page 11 of 43

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804

Mail:[e-mail]

2.3 T270 storage function ：

1: T270 has different kinds storage connectors:
USB connector,TF connector. USB connector can insert U disk, mobile hard
disk,solid state disk and so on , TF connector can insert TF storage card ( support 64G
storage function at the maximium)

2: Enter Web stteing -Status- Shared file , then it can check current storage
information .

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd Page 12 of 43

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804

Mail:[e-mail]

3.Storage function usage : We can manange T270 storage medium by FTP
protocols,open run menu and then click ftp:\\192.168.10.1 or you also can click

ftp:\\192.168.10.1 in location under resource manager and press “Enter”key, It
can access to T270 storage medium.Here, We can add.delete,create different types of
files and the same way with management local hard disks.

4.Access to T270 storage medium by mobile phone, you can use the function of ES
files browser and other tools, setting methods as below:
(1) Open ES file browser

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd Page 13 of 43

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804

Mail:[e-mail]

(2) Click the menu on the top-left, Choose FTP