![](/html/8d/8d0a/8d0a99c9dfd8686b73ed5b32361fc38081133d41d0c8ca761021f2b01fc5e324/bg1.png)
INT-HD70-TXWP Owners Manual
Rev 190628
11675 Ridgeline Drive
Colorado Springs, CO
80921
Phone: 719-260-0061
Toll-Free: 800-530-8998
Fax: 719-260-0075
![](/html/8d/8d0a/8d0a99c9dfd8686b73ed5b32361fc38081133d41d0c8ca761021f2b01fc5e324/bg2.png)
INT-HD70-TXWP Owners Manual
» Please completely read and verify you understand all instrucons in this manual before operang this equipment.
» Keep these instrucons in a safe, accessible place for future reference.
» Heed all warnings.
» Follow all instrucons.
» Do not use this apparatus near water.
» Clean only with a dry cloth.
» Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)
that produce heat.
» Use only accessories specied or recommended by Intelix.
» Explanaon of graphical symbols:
◊ Lightning bolt/ash symbol: the lightning bolt/ash and arrowhead within an equilateral triangle
symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the
product enclosure which may be of sucient magnitude to constute a risk of shock to a person or
persons.
Important Safety Instrucons
◊ Exclamaon point symbol: the exclamaon point within an equilateral triangle symbol is intended
to alert the user to the presence of important operang and maintenance (servicing) instrucons
in the literature accompanying the product.
» WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
» Use the mains plug to disconnect the apparatus from the mains.
» THE MAINS PLUG OF THE POWER CORD MUST REMAIN READILY ACCESSIBLE.
» Do not defeat the safety purpose polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of
your obsolete outlet. Cauon! To reduce the risk of electrical shock, grounding of the center pin of this plug must be
maintained.
» Protect the power cord from being walked on or pinched parcularly at the plugs, convenience receptacles, and the
point where they exit from the apparatus.
» Do not block the air venlaon openings. Only mount the equipment per Intelix’s instrucons.
» Use only with the cart, stand, table, or rack specied by Intelix or sold with the equipment. When/if a
cart is used, use cauon when moving the cart/equipment combinaon to avoid injury from p-over.
» Unplug this apparatus during lightning storms or when unused for long periods of me.
» Cauon! Shock Hazard. Do not open the unit.
» Refer to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
2
![](/html/8d/8d0a/8d0a99c9dfd8686b73ed5b32361fc38081133d41d0c8ca761021f2b01fc5e324/bg3.png)
INT-HD70-TXWP Owners Manual
Table of Contents
Product Overview ��������������������������������������������������������������������������������������������������������������������������������������� 4
Product Contents ���������������������������������������������������������������������������������������������������������������������������������������� 4
Transmier View ���������������������������������������������������������������������������������������������������������������������������������������� 5
Front and Back Panel ������������������������������������������������������������������������������������������������������������������������������������5
Installaon Instrucons ������������������������������������������������������������������������������������������������������������������������������ 6
Quick Start ���������������������������������������������������������������������������������������������������������������������������������������������������� 6
Connecng a Video Source ��������������������������������������������������������������������������������������������������������������������������� 6
HDMI Input (Transmier) .......................................................................................................................6
Connecng a Display ������������������������������������������������������������������������������������������������������������������������������������� 6
HDMI Output (Receiver not included) ....................................................................................................6
HDBaseT Connecon ������������������������������������������������������������������������������������������������������������������������������������� 7
Connecng RS232 Control ����������������������������������������������������������������������������������������������������������������������������� 7
Connecng IR Control ����������������������������������������������������������������������������������������������������������������������������������� 8
Device Control using IR ........................................................................................................................... 8
Device Control from Control System ......................................................................................................8
Apply Power �������������������������������������������������������������������������������������������������������������������������������������������������� 8
Applicaon Diagrams ��������������������������������������������������������������������������������������������������������������������������������� 9
HDMI Extension / IR Control ������������������������������������������������������������������������������������������������������������������������� 9
HDMI Extension / RS232 Control �����������������������������������������������������������������������������������������������������������������10
Technical Specicaons ���������������������������������������������������������������������������������������������������������������������������� 11
3
![](/html/8d/8d0a/8d0a99c9dfd8686b73ed5b32361fc38081133d41d0c8ca761021f2b01fc5e324/bg4.png)
INT-HD70-TXWP Owners Manual
Product Overview
The Intelix INT-HD70-TXWP extends HDMI, IR, and RS232 over a single solid core shielded Category 5e
or greater cable using the Valens VS010TX HDBaseT chip. The INT-HD70-TXWP supports 1080p video
signal up to 70m and 4K signals up to 4K@60Hz / 4:2:0 / 8 bit color up to 40m. The INT-HD70-TXWP
supports CEC pass through and is HDCP 2.2 compliant. 48V PoH built in allows the transmier to be
powered from a compable Intelix receiver, the transmier also has 12V DC output for powering 3rd
party device nearby.
The INT-HD70-TXWP is compable with all Intelix HDBaseT product oerings and any product that
meets the HDBaseT specicaons.
Product Contents
• INT-HD70-TXWP HDBaseT Wall Plate Transmier
• Quick Install Guide
• (3) 2 pin Phoenix connector
• (1) 3 pin Phoenix connector
• (2) Mounng Screws
4