Liberty DigitaLinx DL-HDCAT User Manual

User’s Manual
Digital Media Converter Package
Part #: DL-HDCAT
1-1
Digital Media Converter Package
Part #: DL-HDCAT
1-1 Table of Contents
1-2 Welcome and Safety Notes
1-3 Product Description and General Specications
1-4 Environmental Reliability Specications
1-5 Features
1-6 Installation
1-7 Mechanical Specications
1-8 Technical Specications
1-9 Warranty Information
1-10 Troubleshooting and Customer Service Information
TABLE OF CONTENTS
1-2
Digital Media Converter Package
Part #: DL-HDCAT
Congratulations on your purchase of a DigitaLinx™ Digital Media Converter System. This manual contains information that will assist you in the installation and operation of this product. Please inspect the contents of the package to ensure all required material is present.
Contents:
Each DigitaLinx™ Digital Media Converter package contains the following items:
1 each DL-HDCAT Digital Media Converter Set (TX and RX unit) 1 each 5 VDC Power Supply (UL) and C(UL) listed Class 2 C(UL)US 1 each Users Manual
Safety Precautions:
1.) Please read all product manuals and safety notes prior to operating this or any devices.
2.) Retain the product manuals and safety notes for future reference.
3.) Unplug this unit prior to cleaning; do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4.) Do not use this equipment near damp or wet locations.
5.) The product should only be powered by the indicated sources in the specications. Do not use other sources of power.
6.) Do not use damaged power cords or plugs and do not use loose electrical outlets. Please refer repair of non-conforming electrical equipment to certied personnel.
7.) Do not place heavy articles or other equipment on top of this device or its associated peripherals.
8.) Do not use this device near ammable material, liquids, or gas.
Welcome and Safety Notes
1-3
Digital Media Converter Package
Part #: DL-HDCAT
This DigitaLinx™ Digital Media Converter is an externally powered digital HDMI and DVI Media Converter system to send HDMI and DVI over standard Category Cable, unshielded or shielded. The unit uses an included 5 VDC power source. The device is compliant with DVI
1.0 and supports HDMI 1.3 signals. The device is fully compliant with HDCP protocol. This device is certied HDMI 1.3b Category 1 through an Authorized Testing Center (ATC).
This Digital Media Converter is ideal for installations where pre-wire has been done with multiple category cables or where space constraints limit installing HDMI® or DVI cables. The Category cable solution is also excellent for retrot applications. The compact design allows the devices to be unobtrusive in the nal installation. It is recommended to test an application using the customer equipment as the signal from the source device varies between manufacturers.
The system can easily accommodate DVI only inputs and outputs by using Liberty’s high quality HDMI to DVI interconnects. The DVI connector is routed to the sources and display unit while the HDMI connector plugs into the DigitaLinx™ Digital Media Converter. The digital audio signal is not transmitted when using DVI connectors.
The actual transmission distance can vary depending on many factors. Liberty Wire and Cable has performed application testing and found these devices can eectively operate in excess of the distances listed. The quality of the Category cable is a prime factor in limiting distances. Use of Category 6 cable will extend distances and use of overall shielded category cables will reduce EMI issues. This is a practical application chart with actual observed distances and performance in a real application.
User results will vary based upon the quality of the Category Cabling, the installation practices used, and the features of the sources and displays. It is recommended the Category cable be properly tested to verify Gigabit Ethernet capability. This will identify any issues caused during installation and termination.
Product Description and General Specications
ITEM DESCRIPTION
Model Name DL-HDCAT (TX Unit) DL-HDCAT (RX Unit)
Input(s) 1) HDMI type A Receptacle (2) 8P8C Shielded Modular Jacks (R J45)
Output (2) 8P8C Shielded Modular Jacks (RJ45) (1) HDMI type A Receptacle
Supported Resolutions 480i, 480p, 720p, 1080i, 1080p up to 60 Hz
HDCP Compatible Yes
Power Consumption N/A – Power on the RX unit 5 VDC 1.0 Watt from supplied DC unit
Dimensions:
(Length x Width x Height) 67 x 48 x 24 mm 67 x 48 x 24 mm
Weight ~0.125 Kg ~0.126 Kg
Cable-------Resolution 720p60 1080i30 1080p24 1080p60
Category 5e UTP 60m (197 feet) 60m (197 feet) 20m (66 feet) 20m (66 feet)
Category 5e F/UTP 60m (197 feet) 60m (197 feet) 20m (66 feet) 20m (66 feet)
Category 6 80m (260 feet) 80m (260 feet) 50m (165 feet) 50m (165 feet)
LOW SKEW UTP NOT RECOMMENDED
Recommended UTP Distance 40m (132 feet) 40m (132 feet) 20m (66 feet) 20m (66 feet)
Loading...
+ 8 hidden pages