Page 1
Liquid Beeswax
•
Traditional wax that nourishes wood
•
Feeds wood and protects against dryness
•
Gives an authentic finish
•
Ideal for use on large surfaces
•
Suitable for hard and softwoods
•
EN71 Part 3 Approved – Safe for toys
USAGE
Product use
Liberon Liqui
It is particularly suitable for large and very dry surfaces such as beams, floors, doors and staircases.
Preparation
Remove old waxes and dirt with Liberon Wax and Polish Remover if necessary. Ensure the surface is
clean, dry and free from dust.
Application
Shake well before use. Apply Liberon Liquid Beeswax with a cloth, brush or spray gun. Allow to become
touch dry for a minimum of 1 hour – longer if possible,
finish with a Liberon Drill Brush. Repeat the operation on new or very dry wood as it may require two or
more coats. For a better quality finish apply thin coats of wax and buildbuffing between coats.
d Beeswax is ideal for nourishing absorbent woods such as pine and oak, especially unsealed.
COVERAGE
APPLICATION
then buff with a clean cotton cloth, or for a faster
DRYING
TIME
up to the desired level
TOOL
CLEANING
of sheen,
Precautions
• Not suitable for high water areas such as kitchens and bathrooms.
•
Cleaning and maintenance
Wipe over with a cloth or duster and re-
Colours:
Packaging
500 ml, 1 L, 5 L
For further information on this or other Liberon products please contact Libe
01797 361136.
In cold weather wax may thicken. To soften remove cap and stand in a bowl of hot water for 5
minutes, replace the cap and shake. Repeat if nec
wax as required. Do not wash with water.
Clear, Antique Pine.
essary.
ron Technical Services on
Page 2
This document was created with Win2PDF available at http://www.daneprairie.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
Loading...