LG.Philips LCD LC320W01-SL05 Specification

Product Specification

SPECIFICATION

FOR

APPROVAL

LC320W01

Liquid Crystal Display

( ) Preliminary Specification

)( Final Specification

●

BUYER
MODEL

APPROVED BY

/

/

Hisense

SIGNATURE

DATE

This Product must be used for a TV Application
This is not designed for the public display.

32.0” WXGA TFT LCDTitle

LG.Philips LCD Co., Ltd.SUPPLIER

LC320W01*MODEL
SL05SUFFIX

*When you obtain standard approval,

please use the above model name without suffix

APPROVED BY

J.H.Yoon / Senior Manager

REVIEWED BY

J.H.Park / Manager

SIGNATURE

DATE

/

Please return 1 copy for your confirmation with

your signature and comments.

Ver. 1.0 Oct. 07, 2005

PREPARED BY

B.J.Choi / Engineer

TV Product Development Dept.

LG. Philips LCD Co., Ltd

1/ 28

Product Specification

CONTENTS

LC320W01

Liquid Crystal Display

PageITEMNumber

COVER
CONTENTS

GENERAL DESCRIPTION1
ABSOLUTE MAXIMUM RATINGS2
ELECTRICAL SPECIFICATIONS3

ELECTRICAL CHARACTERISTICS3-1
INTERFACE CONNECTIONS3-2
SIGNAL TIMING SPECIFICATIONS3-3

SIGNAL TIMING WAVEFORMS3-4
COLOR INPUT DATA REFERENCE3-5

POWER SEQUENCE3-6
OPTICAL SPECIFICATIONS4
MECHANICAL CHARACTERISTICS5
RELIABILITY6

1
2

3RECORD OF REVISIONS
4

5
6

6
8

12
13

14
15
17
21
24

INTERNATIONAL STANDARDS7
SAFETY7-1
EMC7-2
PACKING8
DESIGNATION OF LOT MARK8-1
PACKING FORM8-2

Ver. 1.0 Oct. 07, 2005

25
25
25
26
26
26

27PRECAUTIONS9
27MOUNTING PRECAUTIONS9-1
27OPERATING PRECAUTIONS9-2
28ELECTROSTATIC DISCHARGE CONTROL9-3
28PRECAUTIONS FOR STRONG LIGHT EXPOSURE9-4
28STORAGE9-5
28HANDLING PRECAUTIONS FOR PROTECTION FILM9-6

2/ 28

Product Specification

RECORD OF REVISIONS

Preliminary Specification-Aug. 23, 20050.0
Changed table3. Connector Pin #10’s description, note.8Oct. 07, 20051.0
Adding the attached figure of the AI_ENABLE Circuit Block Diagram.29

LC320W01

Liquid Crystal Display

DescriptionPageRevision DateRevision No

Ver. 1.0 Oct. 07, 2005

3/ 28

LC320W01

Liquid Crystal Display

Product Specification

1. General Description

The LC320W01 is a Color Active Matrix Liquid Crystal Display with an integral External Electrode Fluorescent
Lamp(EEFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally black mode. It has a 31.51 inch diagonally
measured active display area with WXGA resolution (768 vertical by 1366 horizontal pixel array).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes.
Gray scale or the luminance of the sub-pixe l color is determined with a 8-bit gray scale signal fo r each dot,
thus presenting a palette of more than 16.7M(true) colors.
It has been designed to apply the 8-bit 1-port LVDS interface.
It is intended to support LCD TV, PCTV where high brightness, super wide view ing angle, high color gamut,
high color depth and fast response time are important.

RGB(Mini-LVDS)

Source Driver Circuit

TFT - LCD Panel

(1366 × RGB × 768 pixels)

+12.0V

LVDS

5pair

Select #9
Enable #10

VBR_EXT

#28
#27VBR_OUT

CN4

CN1

(30pin)

LUT Data

LUT Data

DCR LUT, ODC LUT

LVDS Rx (Receiver)

DCR Controller
ODC Controller

Timing Controller

Gate Driver Circuit

S1 S1366

G1

G768

+24.0V
+24.0V

General Features

Power Circuit

Block

CN2, Inverter (Master, 12Pin, High)

CN3, Inverter (Slaver, 12Pin, High)

31.51 inches(800.4mm) diagonalActive Screen Size

760.0 mm(H) x 450.0 mm(V) x 48.0 mm(D) (Typ.)Outline Dimension

170.25㎛ x 510.75㎛ x RGBPixel Pitch
1366 horiz. by 768 vert. pixels RGB stripe arrangementPixel Format
8bit, 16,7 M colorsColor Depth

500 cd/m2 (Center 1 point) (Typ.)Luminance, White
1600:1 (Typ.)Dynamic C/R (for AI)

Viewing angle free ( R/L 178(Typ.), U/D 178(Typ.))Viewing Angle (CR>10)
Total 88.26 Watt (Typ.) (Logic=4.26 W, Lamp=84W [IBL=90mA] )Power Consumption

6,900 g (Typ.)Weight
Transmissive mode, normally blackDisplay Operating Mode

Hard coating(3H), anti-glare treatment of the front polarizerSurface Treatment

Back light Assembly (18EEFL)

Ver. 1.0 Oct. 07, 2005

4/ 28

LC320W01

Liquid Crystal Display

Product Specification

2. Absolute Maximum Ratings

The following items are maximum values which, if exceeded, may cause faulty operation or damage to the
LCD module.

Table 1. ABSOLUTE MAXIMUM RATINGS

Parameter Remark

Power Input

Voltage

LCM

Backlight inverter
ON/OFF Control Voltage
Brightness Control Voltage
Operating Temperature
Storage Temperature
Operating Ambient Humidity
Storage Humidity

Symbol

Value

MaxMin

+400TOP

+50-20TST

Unit

VDC+14.0-0.3VLCD
VDC+27.021.6VBL
VDC+5.25-0.3VON/OFF
VDC+5.00VBr

°C

°C

%RH9010HOP

%RH9010HST

Note : 1. Temperature and relative humidity range are shown in the figure below.

Wet bulb temperature should be 39 °C Max. and no condensation of water.

90%

60

60%

at 25 ± 2 °C

Note 1

Wet Bulb

50

Temperature [℃]

40

30

20

10

0

10 20 30 40 50 60 70 800-20

Dry Bulb Temperature [°C]

Ver. 1.0 Oct. 07, 2005

40%

10%

Storage

Operation

Humidity󰼿[(%)RH]

5/ 28

LC320W01

Liquid Crystal Display

Product Specification

3. Electrical Specifications 3-1. Electrical Characteristics

It requires two power inputs. One is employed to power for the LCD circuit. The other input power for the
EEFL/Backlight is to power inverter.

Table 2-1. ELECTRICAL CHARACTERISTICS

Parameter Symbol

Value

MODULE :

VLCDPower Input Voltage

VRPPermissible Input Ripple Voltage

ILCDPower Input Current

PLCDPower Consumption
IRUSHRush current

Notes : 1. The specified current and power consumption are under the V

condition whereas mosaic pattern(8 x 6) is displayed and fVis the frame frequency.

2. The current is specified at the maximum current pattern.

3. The duration of rush current is about 2ms and rising time of power input is 1ms (min.).

White : 255Gray
Black : 0Gray

MaxTypMin

12.612.011.4
200--

VDC

mVP-P

462355­607467-

5.544.26-

3.0--

=12.0V, 25 ± 2°C, fV=60Hz

LCD

NoteUnit

1mA
2mA

1Watt
3A

Mosaic Pattern(8 x 6)

Ver. 1.0 Oct. 07, 2005

6/ 28

Product Specification

Table 2-2. ELECTRICAL CHARACTERISTICS

LC320W01

Liquid Crystal Display

Parameter Symbol

NoteUnit

MaxTypMin

Inverter :

Value

Power Input Voltage
Power Input Current

Power Consumption

Input Voltage for

Control System

Signals

Brightness Adjust

On

On/Off

Off

VBL

IBL

PBL

VBR
V on
V off

25.224.022.8

3.853.5-

92.484-

3.30

5.255.03.0

0.80-0.3

VDC

VDC

V

DC

1

1A
1W
2VDC

Lamp :

Life Time

60,00050,00025±2℃

3Hrs

Note : 1. The specified current and power consumption are under the typical supply Input voltage, 24.0V.

Ripple voltage of the Power Input Voltage is under 0.2 Vp-p.

Brightness Control.

2.

BR Voltage control brightness.

This V

VBR Voltage

Function
Maximum Brightness (100%)3.3V
Minimum Brightness.(30%)0V

3. Specified values are for a single lamp which is aligned horizontally.
The Life Time is determined as the time at which brightness of the lamp is 50% compared to that of
initial value at the typical lamp current on condition of continuous operating at each ambient
temperature.

Ver. 1.0 Oct. 07, 2005

7/ 28

LC320W01

Liquid Crystal Display

Product Specification

3-2. Interface Connections

This LCD module employs two kinds of interface connection, a 30-pin connector is used for the module
electronics and two 12-pin connectors are used for the integral backlight system.

3-2-1. LCD Module

- LCD Connector(CN1) : FI-X30SSL-HF (Manufactured by JAE) or Equivalent

- Mating Connector : FI-30C2L (Manufactured by JAE) or Equivalent

Table 3. MODULE CONNECTOR(CN1) PIN CONFIGURATION

NoteDescriptionSymbolPin No.

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30

VLCD Power Supply +12.0V

Power Supply +12.0VVLCD
Power Supply +12.0VVLCD
Power Supply +12.0VVLCD

GroundGND
GroundGND

GroundGND
GroundGND
Select LVDS Data formatSelect

DCR Enable

Dynamic CR Enable ( ‘GND’= Disable , ‘3.3V’ = Enable )

GroundGND
LVDS Receiver Signal(-)RA­LVDS Receiver Signal(+)RA+
GroundGND
LVDS Receiver Signal(-)RB­LVDS Receiver Signal(+)RB+
GroundGND
LVDS Receiver Signal(-)RC­LVDS Receiver Signal(+)RC+
GroundGND
LVDS Receiver Clock Signal(-)RCLK­LVDS Receiver Clock Signal(+)RCLK+
GroundGND
LVDS Receiver Signal(-)RD­LVDS Receiver Signal(+)RD+
GroundGND

VBR output form LCD moduleVBR_OUT
External VBR input from System to LCD moduleVBR_EXT

GroundGND
GroundGND

Page.29

1

2

Note: 1. If the pin no. 9 is Ground, Interface format is “LG”, and if the pin no. 9 is Vcc(3.3V), Interface format

is “DISM”. See page 9 and 10.

2. The pin no. 30 is necessary for LCD test.
When LVDS signals are abnormal operation more than 3-Vsync times and power 12V is supplied,

‘Open’ or ‘Vcc’ : LCD operate itself some test patterns.(AGP – Auto Generation Pattern)
‘Ground’ : LCD operate itself a black pattern. (NSB – No Signal Black)

LPL recommend ‘Ground’ for NSB.

4. All GND (ground) pins should be connected together, which should be also connected to the LCD

module’s metal frame.

5. All V

LCD (power input) pins should be connected together.

6. Input Levels of LVDS signals are based on the IEA 664 Standard.

Ver. 1.0 Oct. 07, 2005

8/ 28

LC320W01

Liquid Crystal Display

Product Specification

Table 4. REQUIRED SIGNAL ASSIGNMENT FOR LVDS TRANSMITTER ( Pin9=“L” or “Open” )

Host System

24 Bit

RED0
RED1
RED2
RED3
RED4
RED5
RED6

RED7
GREEN0
GREEN1
GREEN2
GREEN3
GREEN4
GREEN5
GREEN6
GREEN7

BLUE0
BLUE1
BLUE2
BLUE3
BLUE4
BLUE5
BLUE6
BLUE7

Hsync

Vsync

Data Enable

CLOCK

DS90C385

or Compatible

51
52
54
55
56
3
50
2
4
6
7
11
12
14
8
10
15
19
20
22
23
24
16
18
27
28
30
31

TxOUT0­TxOUT0+

TxOUT1­TxOUT1+

TxOUT2­TxOUT2+

TxCLKOUT­TxCLKOUT+

TxOUT3­TxOUT3+

FI-X30SSL-HF

48
47

46
45

42
41

40
39

38
37

GND

GND

12
13

15
16

18
19

21
22

24
25

30

Timing

Controller

100Ω

100Ω

100Ω

100Ω

100Ω

9

RxIN0­RxIN0+

RxIN1­RxIN1+

RxIN2­RxIN2+

RxCLKIN­RxCLKIN+

RxIN3­RxIN3+

LG / DISM

LCD Test

LCD Module

Note: 1. The LCD Module uses a 100 Ohm [Ω] resistor between positive and negative lines of each receiver

input.

2. Refer to LVDS Transmitter Data Sheet for detail descriptions. (DS90C385 or Compatible)

3. ‘7’ means MSB and ‘0’ means LSB at R,G,B pixel data.

Ver. 1.0 Oct. 07, 2005

9/ 28