LG-Ericsson LIP-8002E, LIP-8002AE Quick Manual
IP Phone
Quick Guide
LIP-8002E/8002AE
Please read this manual carefully before operating your set.
Retain it for future reference.
LIP-8002E/2AE Quick Guide ST
Important Safety information
To prevent the risk of harm to the user or damage to equipment, please read this
information before installing or repairing the phone.
1. Only trained and qualified service personnel should install, replace or service the phone.
2. Don’t spill liquid (ex. Water) on the phone. In case of spill, contact your service
technician for assistance to avoid fire or electric shock.
3. If you see smoke or smell something burning, unplug the power cord and the phone line.
Call your service technician for assistance
.
4. Don’t use the phone during a thunderstorm. Lightning strike may result in a fire, severe
electrical or acoustic shock.
5. Don’t tug the power cord or the phone line. This may result in a fire, an electric shock or
equipment damage.
6. Ensure that children do not pull on phone cords. This may injure children or result in
equipment damage.
7. The ear-piece houses a magnetic device which may attract pins or small metal objects.
Keep handset clear of such objects and check before use.
8. Avoid placing the phone in an area that is dusty, damp or subject to vibration.
9. Choose a site that is dry and well ventilated.
10. Don’t put the heavy things on the phone.
11. Do not drop or throw the phone
.
12. Static electricity discharge will damage electronic components
.
13. Keep out of direct sunlight and away from heat.
14. Clean the phone with a soft, dry cloth only. Do not use volatile liquids such as petrol,
alcohol or acetone as this may cause a fire or result in discoloration or damage to
plastics. Do not clean with wax or silicon products as these may enter the equipment and
cause operation to become unreliable.
15. No user serviceable parts inside. Do not inset a screw driver or any metal objects into
the phone. This may cause electric shock or damage the equipment and will render the
warranty void.
Copyright© 2011 LG-Ericsson Co., Ltd. All Rights Reserved
This material is copyrighted by LG-Ericsson Co., Ltd.
Any unauthorized reproductions, use or
disclosure of this material, or any part thereof, is strictly prohibited and is a violation of Copyright
Laws. LG-Ericsson reserves the right to make changes in specifications at any time without
notice. The information furnished by LG-Ericsson in this material is believed to be accurate and
reliable, but is not warranted to be true in all cases.
1
LIP-8002E/2AE Quick Guide ST
Regulatory information
European Union Declarations of Conformity
LG-Ericsson Co., Ltd
. declare that the equipment specified in this document bearing the “ CE” mark
conforms to the European Union Radio and Telecommunications Terminal Equipment Directive(R&TTE
1999/5/EC), including
the Electromagnetic Compatibility Directive(2004/108/EC) and Low Voltage
Directive(2006/95/EC)
.
Copies of these Declarations of Conformity (DoCs) can be obtained by contacting your local sales
representative
.
FCC/IC Interference Statement : USA / CSA
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules
.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation
.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna
.
Increase the separation between the equipment and receiver
.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
.
Consult the dealer or an experienced radio/TV technician for help
.
This device complies with part 15 /RSS-GEN of the FCC/IC rules. Operation is subject to the following
two conditions:
(1)This device may not cause harmful interference; and (2) This device must accept any interference
received, including interference that may cause undesired operation
.
This Class B digital apparatus complies with Canadian ICES-003
.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
.
The use of this device in a system operating either partially or completely outdoors may require the user
to obtain a license for the system according to the Canadian regulations
.
CAUTION : Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority to operate the
equipment
.
2
LIP-8002E/2AE Quick Guide ST
LIP-8002E/8002AE
The LG-Ericsson IP phone (LIP-8002E/8002AE) is Internet Protocol (IP) phones designed to
support hosted telephony services over a managed IP network.
The LIP-8002E/8002AE Phone has fixed feature buttons, flexible buttons that are configurable,
and dial pad buttons as shown in the figure below.
Fixed Feature Button Definitions
DND – Blocks all incoming calls. Toggle to activate.
Speed – Access speed dialing, speed programming.
Vol – Adjusts volume for ringing, headset, and speakerphone; adjusts LCD brightness (in
idle state).
Trans/PGM –Initiates call transfer, or enters programming mode.
Hold / Save – Places active call on hold or saves programming information.
Speaker – Toggle to activate.
Call Back – Initiates call back request when calling a busy station; call is completed when
busy station returns to idle status.
Flexible buttons – Some are system pre-programmed for line appearance, and some are
user programmable
.
Ring/MSG Indicator – Illuminates when ringing, or message waiting.
LCD Display – Phone interface for status, dialing directories, and text message information.
Hands-free Microphone – Used for hands-free speakerphone function.
3
LIP-8002E/2AE Quick Guide ST
LIP-8002E/8002AE Keyset User Operation
The following is provided as quick reference for commonly used features/functions.
Complete instructions are included in the User Guide
.
Placing a Call:
ICM Line –
•
Lift handset or press SPEAKER button
.
•
Dial the extension number from the keypad.
CO Line –
•
Lift handset or press SPEAKER button
.
•
Press CO/IP line, or dial access number.
•
Dial desired phone number.
Using Camp-On (Call-Wait):
•
When calling a busy Station, press *.
•
Wait for party to answer.
(iPECS-CM/MG)
•
Call a busy Statoin.
•
Press [TRANS/PGM] button and dial Camp-On Register Code.
To retry a busy external number until answered:
•
When placing an outgoing call to a busy party, press the REDIAL button if it has been
registered as flexible key.
•
Hang-up handset; the call will be retried until the call is connected or the feature is
cancelled.
(iPECS-CM/MG)
•
When placing an outgoing call to a busy party, press the CALL BACK button.
•
Hang up handset; the call will be completed when busy party returns to idle state
.
4
LIP-8002E/2AE Quick Guide ST
Delete Auto Call Number Redial (ACNR):
•
Press the REDIAL button if it has been registered as Flexible key
.
(iPECS-CM/MG)
•
When placing an outgoing call to a busy party, press the CALL BACK button.
Answering a Call while idle:
ICM Line –
•
Lift handset, or if in HF mode, just speak.
CO Line –
•
Lift handset.
(iPECS-CM/MG)
•
Lift handset, and press flashing Flex button (as needed)
.
Using Do Not Disturb (DND):
•
Press the DND button (toggles ON and OFF).
Pickup a Call to another Station:
•
Lift handset.
•
Dial Directed Call Pick-up Code.
•
Dial the intercom number of the ringing station.
Pickup a Call from another Station in your Group:
•
Lift the handset.
•
Dial Group Call Pickup code.
5
Loading...