Page 1
Using Software
5 Bass Boost : Boosts the lowest frequencies for enhanced bass sound.
6 Change Output Device : Changes the sound output device.
TIP
If you want to remove Audio Driver or DTS Sound, remove [DTS Sound] and
[Realtek High Definition Audio Driver] in the order specified and restart the system.
If you want to reinstall Audio Driver or DTS Sound, remove [DTS Sound] and
[Realtek High Definition Audio Driver] in the order specified and install [Realtek
High Definition Audio Driver]. Then restart the system and install [DTS Sound].
• If you do not remove or install them in the order specified, an error may occur.
129
ENGLISH
Page 2
Using Software
] icon to run the CyberLink YouCam.
2 CyberLink YouCam Home Page appears as follows.
a Viewer : Displays the Webcam screen.
ENGLISH
130
CyberLink YouCam
Cyberlink YouCam is the program that can take picture or moving images through the web
camera.
The figures herein are subject to change without prior notice.
The web camera is optional, and so it may not be installed in some models.
For more information on how to use CyberLink YouCam, refer to Help.
TIP
You can change the web camera resolution on Setup menu.
Using Cyberlink YouCam
1 Switch to the Desktop mode after clicking the [Desktop tile] in the Start screen. And
then, click the [
Page 3
Using Software
Takes pictures.
Records movie clips.
Takes the picture of Desktop.
Configures the user preferences.
Switches to the full screen view.
Starts the video monitoring function.
Allows you to use the Album and the Animation Effect.
Allows you to use the Drawing function.
Allows you to use the Zoom and Face Recognition
functions.
Deletes the picture created using the Drawing function or
clears the Animation Effect.
Displays information about CyberLink YouCam.
ENGLISH
b Image Gallery: Use to record pictures and moving images, play back or delete those
images.
c Frame / Animation Effect menu: Can add a frame and animation effect on the
screen.
Major Buttons
131
Page 4
132
Displays the Help.
Uploads movie clips to YouTube.
Uploads pictures or movie clips to facebook.
Sends pictures or movie clips via e-mail.
Deletes the selected picture or movie clip.
ENGLISH
Using Software
Page 5
Restoring the System
] icon in Desktop to run LG Recovery Center.
ENGLISH
133
Restoring the System
Using the PCLG Recovery Center
If the system has an error, you can use LG Recovery Center to use Windows 8.1 recovery
function to recover or restore the system to its initial pre-purchase state.
TIP
LG Recovery Center uses the Windows 8.1 recovery function.
For more information about Windows 8.1 recovery, refer to [Windows Help and Support].
CAUTION
If you have deleted the restoration data in the protected area of the disk, or have
arbitrarily installed another operating system, the restore function may not work.
Click the [
Page 6
Restoring the System
b When the following screen appears, select the USB flash drive and click [Next].
CAUTION
This process deletes all the data on the storage device designated as a recovery
drive. Make sure to back up its data in advance.
ENGLISH
134
1 PC Refresh : Recovers the PC without losing any personal files.
CAUTION
PC settings are reset to default and any user-installed software will be deleted.
2 PC Reset : Removes all items from the system and restores the system to its initial pre-
purchase state.
CAUTION
All data is lost during the initialization, so you must backup all critical data in advance.
It may take about 5 hours or longer depending on the system conditions.
3 Create Recovery Drive : You can create a recovery drive in Windows as a precaution
against a system failure that prevents you from entering the operating system, or any
other severe system issues.
a When the following screen appears, select [Copy the recovery partition from the PC
to the recovery drive.] and click [Next].
Page 7
Restoring the System
c Once the storage device is ready, click [Finish] to create a recovery drive.
CAUTION
Select [Delete the recovery partition] while creating a recovery drive to remove the
recovery partition in the PC.
Once the recovery partition is removed, you cannot use the recovery function of
the PC. You can only recover the system using the recovery media.
ENGLISH
135
Page 8
136
ENGLISH
Restoring the System
Page 9
Restoring the System
ENGLISH
Recovering from a Boot Failure
If booting is impossible due to a serious error with the system, you can recover the system
using LG Recovery Center RE.
CAUTION
If you have deleted the restoration data in the protected area of the disk, the restore
function may not work.
Using LG Recovery Center RE
CAUTION
All data is lost during the initialization, so you must backup all critical data in advance.
1 Turn on the PC and press [F11].
2 When the following screen appears, select a language you want to use and then click
[Next].
137
Page 10
Restoring the System
ENGLISH
138
3 When the following screen appears, select the [I Agree] button and then click the [Next]
button.
For recovery, the power adapter must be connected. Connect the system power
and then recover the system.
Page 11
Restoring the System
Recover by Using a Recovery Drive
If it is impossible to recover by using [F11], you can recover the system through a recovery
drive.
TIP
To recover by using a recovery drive, you must have the recovery drive made through LG
Recovery Center [Create Recovery Drive].
1 Connect the recovery drive to the USB port of the PC.
2 Turn on the PC and press [F10].
3 When the screen for selecting the boot device appears, select the connected recovery
drive and click [Enter].
4 Select the [Troubleshooting] menu.
5 Select the item you want and recover the system following the instructions.
ENGLISH
4 When the factory reset has been completed as shown in the following figure, click the
[Complete] button and then restart the system.
139
Page 12
Setup and Upgrade
] tile on the Start screen, or the [ ] icon in Desktop mode to run LG
Update Center.
2 Select [Required update] or [All List] to install the driver.
For more information on LG Update Center, refer to [Help].
TIP
You can use LG Update Center to install deleted drivers or latest drivers easily and
quickly.
For the system optimization, use LG Update Center to keep up-to-date.
ENGLISH
140
Setup and Upgrade
Installing the Driver
The figures herein may differ by language selection and is subject to change for
performance improvements without prior notice.
Using LG Update Center to install the Driver
1 Click the [
Page 13
How to download LG Update Center
Setup and Upgrade
141
You can download LG Update Center from LG Electronics Cyber Service Center (www.lg.
com).
ENGLISH
Page 14
Setup and Upgrade
142
Starting System Setup
ENGLISH
System setup means storing the hardware configuration information of the PC in the flash
memory. Through system setup, the PC retrieves various information including current date
and time, memory capacity, and storage device (HDD, SSD, eMMC) capacity and type.
You setup the system when you set passwords, change the boot order, and add new
peripheral devices to the machine.
Items displayed on the Setup screen may differ by model type and spec.
• Refer to .
• Refer to .
• Refer to .
TIP
To use the system setup (F2), booting device selection (F10), or recovery (F11), you need
to restart the system (click [Restart] in the system power menu) and then immediately
press the corresponding function key due to the fast booting speed.
CAUTION
• Do not change the system setup unless necessary. Incorrect system setup may
cause errors during system operation. Use caution when changing the system
setup.
• For performance improvement, the system setup menu configuration and the initial
setup status may be changed and may become different from images included in the
user manual.
Page 15
1 Press the [F2] key after re-booting the system.
ENGLISH
Setup and Upgrade
143
Page 16
Setup and Upgrade
Keys Used in System Setup
Keys Function
Enter Selects the current item.
Esc To deselect the current item or to move to the previous screen.
▲, ▼, ◄, ► (Arrow
keys)
Moves the cursor up, down, left, and right.
F10 Stores new settings or ends the system setup.
ENGLISH
144
2 In a few moments, the system setup screen appears.
Page 17
Setup and Upgrade
ENGLISH
Setting the Password
This process is to set a password so that other people cannot use the PC or change the
settings.
The user can set a password while booting the system or setting up the system.
CAUTION
• Without the registered password, access to the system will be denied. Write down
and keep the password in a safe place.
Set Supervisor Password
The password prevents unauthorized people from accessing the PC. By default, no
password is set for the machine. If an unauthorized person changes the password in the
System Setup, you will be unable to access the system.
1 After opening the system setup screen, click the [Security] button.
145
Page 18
Setup and Upgrade
ENGLISH
146
2 When the following screen appears, click [Enter] in the [Set Supervisor Password]
menu.
Page 19
Setup and Upgrade
ENGLISH
3 When the following message appears, enter the password and click [OK]. The
password must not exceed 8 total characters consisting of letters (A - Z), numbers (0 -
9), or a combination of both.
147
Page 20
Setup and Upgrade
5 To save the changes in system setup, press [F10].
ENGLISH
148
4 When the following message appears, click [OK].
Page 21
6 When the following message appears, click [YES]. The PC will restart.
TIP
• With Supervisor Password, you are authorized to set all items in the System Setup
and to set Password on boot. In case other people also use the notebook PC, it is
recommended to set the Set User Password.
Set User Password
The password set by the [Set User Password] process is lower than that set by the [Set
Supervisor Password] process, and so the user can use the[Set User Password] only
after setting a password in the [Set Supervisor Password] menu.
ENGLISH
Setup and Upgrade
149
Page 22
Setup and Upgrade
ENGLISH
150
1 After opening the system setup screen, click the [Security] button.
Page 23
Setup and Upgrade
ENGLISH
2 When the following screen appears, click [Enter] in the [Set User Password] menu.
151
Page 24
Setup and Upgrade
ENGLISH
152
3 When the following message appears, enter the password and click [OK]. The
password must not exceed 8 total characters consisting of letters (A - Z), numbers (0 -
9), or a combination of both.
Page 25
4 When the following message appears, click [OK].
5 To save the changes in system setup, press [F10].
ENGLISH
Setup and Upgrade
153
Page 26
Setup and Upgrade
TIP
• [User Password] allows limited access to the items in the System Setup compared
to the [Supervisor Password] item.
Password on boot
[Password on boot] menu protects the system by requesting [Set Supervisor Password]
or [Set User Password] during boot up.
ENGLISH
154
6 When the following message appears, click [YES]. The PC will restart.
Page 27
1 After opening the system setup screen, click the [Security] button.
ENGLISH
Setup and Upgrade
155
Page 28
Setup and Upgrade
ENGLISH
156
2 When the following screen appears, set [Set Supervisor Password] only or both [Set
Supervisor Password] and [Set User Password].
Page 29
Setup and Upgrade
Set SSD Password
SSD Password is to set a password in the SSD separate from the Supervisor Password.
If you set the SSD Password, the password input window appears during booting.
ENGLISH
157
3 Click the [Off] button in the [Password on boot] menu as shown in the following figure.
The button changes to [On] and the [Password on boot] setting is completed.
Page 30
Setup and Upgrade
2 When the [Security] menu appears, click the [HDD Security Status] button.
ENGLISH
158
1 After opening the system setup screen, click the [Security] button.
Page 31
Setup and Upgrade
ENGLISH
3 When the following screen appears, click [Enter] in the [Set SSD User Password]
menu.
159
Page 32
Setup and Upgrade
ENGLISH
160
4 When the following message appears, enter the password and click [OK]. The
password must not exceed 8 total characters consisting of letters (A - Z), numbers (0 -
9), or a combination of both.
Page 33
5 When the following message appears, click [OK].
6 To save the changes in system setup, press [F10].
ENGLISH
Setup and Upgrade
161
Page 34
Setup and Upgrade
CAUTION
Without the SSD Password, it is impossible to recover the SSD.
• Replacement of the SSD due to a forgotten SSD Password is not covered by the
warranty.
ENGLISH
162
7 When the following message appears, click [YES]. The PC will restart.
Page 35
Setup and Upgrade
2 Change the password the same way as setting one.
ENGLISH
Changing or Deleting the Password
You can delete or change the password only after inputting the current password.
Changing the Password
1 Execute System Setup, enter the password, and press [Enter].
163
Page 36
Setup and Upgrade
ENGLISH
164
Deleting the Password
1 Execute System Setup, enter the password, and press the [Security] button.
Page 37
Setup and Upgrade
ENGLISH
2 When the following screen appears, click [Enter] in the [Set Supervisor Password]
menu.
165
Page 38
Setup and Upgrade
ENGLISH
166
3 When the following message appears, enter the current password in the [Enter Current
Password] field.
Page 39
4 Press [Enter] in [Enter New Password] and [Confirm New Password].
ENGLISH
Setup and Upgrade
167
Page 40
Setup and Upgrade
6 To save the changes in system setup, press [F10].
ENGLISH
168
5 When the following message appears, click [OK].
Page 41
7 When the following message appears, click [YES]. The PC will restart.
ENGLISH
Setup and Upgrade
169
Page 42
Setup and Upgrade
2 When the [Security] menu appears, click the [HDD Security Status] button.
ENGLISH
170
Deleting the Password (Set SSD Password)
1 Execute System Setup, enter the password, and press the [Security] button.
Page 43
Setup and Upgrade
ENGLISH
3 When the following screen appears, click [Enter] in the [Set SSD User Password]
menu.
171
Page 44
Setup and Upgrade
ENGLISH
172
4 When the following message appears, enter the current password in the [Enter Current
Password] field.
Page 45
5 Press [Enter] in [Enter New Password] and [Confirm New Password].
ENGLISH
Setup and Upgrade
173
Page 46
Setup and Upgrade
7 To save the changes in system setup, press [F10].
ENGLISH
174
6 When the following message appears, click [OK].
Page 47
8 When the following message appears, click [YES]. The PC will restart.
ENGLISH
Setup and Upgrade
175
Page 48
Setup and Upgrade
ENGLISH
176
Restoring the Factory Default Settings
If you have changed the system setup by mistake, you can restore the system default
settings.
1 After opening the system setup screen, click the [Save & Exit] button.
Page 49
2 When the [Exit] menu appears, click [Load Setup defaults].
ENGLISH
Setup and Upgrade
177
Page 50
Setup and Upgrade
4 To save the changes in system setup, press [F10].
ENGLISH
178
3 When the following message appears, click [Yes]. The settings will be reset to the
factory default.
Page 51
5 When the following message appears, click [YES]. The PC will restart.
TIP
• You may press [F9] to use the [Load Setup defaults] menu.
ENGLISH
Setup and Upgrade
179
Page 52
Setup and Upgrade
ENGLISH
180
Changing Boot Order
The user can change the boot order according to his or her needs, or select a boot device
The model in the example can differ from actual models and is subject to change for
performance improvements, without prior notice.
TIP
To use the system setup (F2), booting device selection (F10), or recovery (F11), you need
to restart the system (click [Restart] in the system power menu) and then immediately
press the corresponding function key due to the fast booting speed.
Changing Boot Order
1 Press the [F2] key after re-booting the system.
Page 53
2 When the system setup screen appears, click the [Boot] button.
ENGLISH
Setup and Upgrade
181
Page 54
Setup and Upgrade
4 To save the changes in system setup, press [F10].
ENGLISH
182
3 Drag the icon of the device to change the booting order in the [Edit Boot Order] menu
to change the booting order.
Page 55
5 When the following message appears, click [YES].
6 The changes are saved and the system reboots.
ENGLISH
Setup and Upgrade
183
Page 56
Setup and Upgrade
ENGLISH
184
Selecting a Boot Device to Use
1 Press the [F10] key after re-booting the system.
Page 57
2 When the Select Boot Device screen appears. select the device.
3 Boots using the selected device.
ENGLISH
Setup and Upgrade
185
Page 58
Setup and Upgrade
ENGLISH
186
Windows 8.1 Auto Scaling
Windows 8.1 Auto Scaling feature may blur the screen or display some icons and texts
larger.
Change the DPI scaling to fit for you as follows:
1 On the Start screen, click the [Desktop] tile to convert the screen to the Desktop
screen.
2 Right-click with the mouse on the desktop and select [Personal Settings] > [Display],
and then check [Let me choose one scaling level for all may displays].
Page 59
3 Select an item size to proceed as instructed.
ENGLISH
Setup and Upgrade
187
Page 60
Setup and Upgrade
] tile, or on the Desktop, press the [ ] icon to
run [LG Control Center].
2 On LG Control Center screen, set the [Instant Booting] to [ON].
3 Shutdown the system and close the notebook PC cover.
4 When the cover is opened, the PC turns on and the system starts to boot automatically.
ENGLISH
188
Using Instant Booting
Instant Booting allows the system to boot automatically when the notebook PC cover is
opened, so that you can use the system without pressing the power button.
1 On the Start screen, press the [
Page 61
FAQ
FAQ
FAQ Content
Recovering from a Boot Failure
If booting is impossible due to a serious error with the system, you can recover the system
using LG Recovery Center RE.
CAUTION
If you have deleted the restoration data in the protected area of the disk, the restore
function may not work.
Using LG Recovery Center RE
CAUTION
All data is lost during the initialization, so you must backup all critical data in advance.
1 Turn on the PC and press [F11].
189
ENGLISH
Page 62
FAQ
ENGLISH
190
2 When the following screen appears, select a language you want to use and then click
[Next].
Page 63
FAQ
ENGLISH
191
3 When the following screen appears, select the [I Agree] button and then click the [Next]
button.
For recovery, the power adapter must be connected. Connect the system power
and then recover the system.
Page 64
FAQ
Recover by Using a Recovery Drive
If it is impossible to recover by using [F11], you can recover the system through a recovery
drive.
TIP
To recover by using a recovery drive, you must have the recovery drive made through LG
Recovery Center [Create Recovery Drive].
1 Connect the recovery drive to the USB port of the PC.
2 Turn on the PC and press [F10].
3 When the screen for selecting the boot device appears, select the connected recovery
drive and click [Enter].
4 Select the [Troubleshooting] menu.
5 Select the item you want and recover the system following the instructions.
ENGLISH
192
4 When the factory reset has been completed as shown in the following figure, click the
[Complete] button and then restart the system.
Page 65
FAQ
] tile, or on the Desktop, press the [ ] icon to
run [LG Control Center].
2 On LG Control Center screen, set the [Instant Booting] to [ON].
3 Shutdown the system and close the notebook PC cover.
4 When the cover is opened, the PC turns on and the system starts to boot automatically.
ENGLISH
Using Instant Booting
Instant Booting allows the system to boot automatically when the notebook PC cover is
opened, so that you can use the system without pressing the power button.
193
1 On the Start screen, press the [
Page 66
FAQ
ENGLISH
194
Windows 8.1 Auto Scaling
Windows 8.1 Auto Scaling feature may blur the screen or display some icons and texts
larger.
Change the DPI scaling to fit for you as follows:
1 On the Start screen, click the [Desktop] tile to convert the screen to the Desktop
screen.
2 Right-click with the mouse on the desktop and select [Personal Settings] > [Display],
and then check [Let me choose one scaling level for all my displays].
Page 67
3 Select an item size to proceed as instructed.
ENGLISH
FAQ
195
Page 68
FAQ
] icon in Desktop to run LG Recovery Center.
1 PC Refresh : Recovers the PC without losing any personal files.
CAUTION
PC settings are reset to default and any user-installed software will be deleted.
ENGLISH
196
LG Recovery Center
If the system has an error, you can use LG Recovery Center to use Windows 8.1 recovery
function to recover or restore the system to its initial pre-purchase state.
TIP
LG Recovery Center uses the Windows 8.1 recovery function.
For more information about Windows 8.1 recovery, refer to [Windows Help and Support].
CAUTION
If you have deleted the restoration data in the protected area of the disk, or have
arbitrarily installed another operating system, the restore function may not work.
Click the [
Page 69
FAQ
b When the following screen appears, select the USB flash drive and click [Next].
CAUTION
This process deletes all the data on the storage device designated as a recovery
drive. Make sure to back up its data in advance.
ENGLISH
197
2 PC Reset : Removes all items from the system and restores the system to its initial pre-
purchase state.
CAUTION
All data is lost during the initialization, so you must backup all critical data in advance.
It may take about 5 hours or longer depending on the system conditions.
3 Create Recovery Drive: You can create a recovery drive in Windows as a precaution
against a system failure that prevents you from entering the operating system, or any
other severe system issues.
a When the following screen appears, select [Copy the recovery partition from the PC
to the recovery drive.] and click [Next].
Page 70
198
c Once the storage device is ready, click [Finish] to create a recovery drive.
CAUTION
Select [Delete the recovery partition] while creating a recovery drive to remove the
recovery partition in the PC.
Once the recovery partition is removed, you cannot use the recovery function of
the PC. You can only recover the system using the recovery media.
ENGLISH
FAQ
Page 71
FAQ
ENGLISH
199
Page 72
FAQ
3 Press [Fn]+[F7] to redirect the video output to the external device.
ENGLISH
200
Connecting a Monitor / TV
TIP
• Ensure the monitor power is off before connecting the external monitor to the PC.
Connecting to the HDMI Port
HDMI is a high-speed multimedia interface that can transfer uncompressed full digital audio
and video signals.
LG Notebook PC supports either HDMI or SPDIF.
In some models, DTS Sound may not work when you use HDMI.
1 Connect the HDMI cable to the PC and the external device (TV, monitor) that supports
HDMI.
2 HDMI port transfers both video and audio simultaneously. So you don't need a separate
audio connection.
Page 73
TIP
Switching screen output device by pressing [Fn] + [F7]
• Press [Fn] + [F7] to display the Toggle Screen menu. Then select the screen mode
you want and press [Enter].
CAUTION
• If you do not set Speaker as the default value after disconnecting the HDMI cable,
the system may not produce any sound.
• If a program was running already, you need to exit and restart the program for it to
produce sound.
FAQ
201
ENGLISH
Page 74
FAQ
202
Using a Wireless or Regular Router
ENGLISH
A wireless / regular router connects several PCs and mobile devices etc. to one internet line
and enables the use of internet and the network.
A wireless / regular router has to be bought separately. Refer to the manual provided
by the manufacturer for instructions.
Connecting a Wireless or Regular Router
If one internet line is used with a wireless / regular router and several devices are
connected, this may result in a slower connection.
In case of a wireless network, it is recommended to change the network name and security
settings for a more secure connection.
Network speed can differ according to operation environment and specifications.
1 Connect the internet cable of the modem that was provided by your internet provider to
the router's WAN port.
2 Connect all devices (PC, IPTV, internet phone, etc.) with a LAN cable to LAN ports 1 to
4 of the router.
The number of LAN ports can vary for each router model.
3 Please refer to the manual provided by the router manufacturer for setup of the network
and Internet.
Page 75
FAQ
203
Wireless Network
The wireless network (Wireless LAN) is the network environment that connects a PC with
the internet provider or company network through an Access Point (wireless or regular
router).
Wireless network is optional, and so it may not be installed in some models.
Turning On/Off Airplane Mode
Prior to using the wireless network, press [Fn] + [F6] to turn off Airplane Mode.
Pressing [Fn] + [F6]keys will turn on or off. If you are not going to use the mode, keep the
mode turned on to reduce the battery power consumption.
Using the Wireless Network
If an Access Point (wired or wireless router) is in the vicinity of the PC, the wireless network
can easily be accessed.
During the search for a wireless network (Wireless LAN), various Access Point may
be found according to the location where the PC is used.
In case no accessible wireless network (Wireless LAN) is near the PC, no Access
Point might be found.
A password protected Access Point cannot be accessed without knowing the right
password.
ENGLISH
Page 76
FAQ
2 In the Charms, click [Settings] > [Wireless Network Icon].
ENGLISH
204
1 Run [Charms] on the Desktop or the Start screen.
Page 77
3 Near available Access Point(wireless network) is automatically searched.
ENGLISH
FAQ
205
Page 78
FAQ
5 When the connection is established, [Connected] is displayed in the connected Access
Point(wireless network).
6 Click the [Internet Explorer] icon in the taskbar to check whether the internet is operating
normally.
ENGLISH
206
4 Select the Access Point (wireless network) you want to use and click [Connect] to
connect to the Access Point.
If a password is set for the wireless network, the Enter Password window
appears.
Page 79
FAQ
ENGLISH
Wired LAN
LAN is the network environment that users can connect to by using a cable to connect to
their internet providers or the company's network.
Using Wired LAN
LAN is installed with an automatic IP (DHCP) as default value.
Please refer to the following instructions to find out more about setting up an automatic IP
(DHCP) or manual IP.
1 Connect the LAN adaptor to the micro USB port on the PC.
TIP
The recommended network cable for the optimal network environment is CAT5 or
higher.
The network (LAN) cable may be connected when the LAN adapter is used.
The LAN adapter may be separately purchased at LG Service Center.
207
Page 80
FAQ
3 On the Start Screen, click the Desktop tile to convert to the Desktop screen.
ENGLISH
208
2 Connect LAN cable to the LAN port.
Page 81
4 Run [Charms] on the Desktop.
ENGLISH
FAQ
209
Page 82
FAQ
ENGLISH
210
5 In the Charm Menu, click [Settings] > [Control Panel] > [View By] > [Small Icon] >
[Network and Sharing Center].
Page 83
6 Click [Change Adapter Settings].
ENGLISH
FAQ
211
Page 84
FAQ
ENGLISH
212
7 Right-click [Ethernet] and select [Properties].
Page 85
8 Select [Internet Protocol Version 4 (TCP/IPv4)] and click [Properties].
ENGLISH
FAQ
213
Page 86
FAQ
10 Press [OK] to complete the network setup.
11 Click the [Internet Explorer] icon in the taskbar to check whether the internet is operating
normally.
ENGLISH
214
9 If you want to use an automatic IP(DHCP), select [Obtain an IP Address
Automatically]. If you want to use a manual IP, select [Use Following IP Address] to
enter the address.
Please ask the network administrator about obtaining a manual IP.
Loading...