LG Electronics USA LH2065H Users Manual

Test Report No.: GETEC-E3-06-047

FCC Class B Class II Permissive Change

APPENDIX H

: USER’S MANUAL

EUT Type: 20” LCD Monitor

FCC ID: BEJLH2065H

User Guide

HP LP2065 20” LCD Monitor

Document Part Number: 397376-001

December 2005

This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications.

HP, Hewlett Packard, and the Hewlett-Packard logo are trademarks of Hewlett-Packard Company in the U.S. and other countries.

Compaq and the Compaq logo are trademarks of Hewlett-Packard Development Company, L.P. in the U.S. and other countries.

Microsoft, Windows, and the Windows logo are trademarks of Microsoft Corporation in the U.S. and other countries.

All other product names mentioned herein may be trademarks of their respective companies.

Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The information in this document is provided “as is” without warranty of any kind, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, and is subject to change without notice. The warranties for Hewlett-Packard products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.

This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company.

WARNING: Text set off in this manner indicates that failure to

follow directions could result in bodily harm or loss of life.

CAUTION: Text set off in this manner indicates that failure to follow

directions could result in damage to equipment or loss of information.

User Guide HP LP2065 20” LCD Monitor First Edition (December 2005)

Document Part Number: 397376-001

Contents

1 Product Features

2 Safety and Maintenance Guidelines

Important Safety Information. . . . . . . . . . . . . . . . . . . . . . 2–1

Maintenance Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . 2–2

Cleaning the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . 2–3

Shipping the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . 2–3

3 Setting Up the Monitor

Installing the Monitor Pedestal . . . . . . . . . . . . . . . . . . . . 3–1

Rear Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3

Selecting the Signal Connectors and Cables . . . . . . . . . . 3–4

Connecting the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 3–6

Connecting USB Devices. . . . . . . . . . . . . . . . . . . . . . . . 3–11

Using the Accessory Rails . . . . . . . . . . . . . . . . . . . . . . . 3–12

Removing the Monitor Pedestal. . . . . . . . . . . . . . . . . . . 3–13

Mounting the Monitor . . . . . . . . . . . . . . . . . . . . . . . 3–14

Locating the Rating Labels . . . . . . . . . . . . . . . . . . . . . . 3–17

4 Operating the Monitor

Software and Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1

The Information File . . . . . . . . . . . . . . . . . . . . . . . . . 4–1

The Image Color Matching File . . . . . . . . . . . . . . . . 4–2

Installing the .INF and .ICM Files . . . . . . . . . . . . . . . . . . 4–2

Installing from the CD. . . . . . . . . . . . . . . . . . . . . . . . 4–2

Downloading from the Worldwide Web . . . . . . . . . . 4–3

Using the Auto-Adjustment Function . . . . . . . . . . . . . . . 4–3

Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5

Adjusting Monitor Settings . . . . . . . . . . . . . . . . . . . . . . . 4–6

User Guide iii

Contents

Using the On-Screen Display . . . . . . . . . . . . . . . . . . 4–7

Optimizing Digital Conversion . . . . . . . . . . . . . . . . 4–14

Identifying Monitor Conditions . . . . . . . . . . . . . . . . . . . 4–15

Sleep Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–16

HP Display LiteSaver. . . . . . . . . . . . . . . . . . . . . . . . . . . 4–17

Installing the HP Display LiteSaver Software. . . . . 4–18

sRGB Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–20

Changing the Color Temperature . . . . . . . . . . . . . . 4–20

Installing the sRGB ICM File for Microsoft Windows

2000 and Windows XP . . . . . . . . . . . . . . . . . . . . . . 4–21

A Troubleshooting

Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . A–1

Using the Worldwide Web. . . . . . . . . . . . . . . . . . . . . . . . A–4

Preparing to call Technical Support. . . . . . . . . . . . . . . . . A–5

B Technical Specifications

LP2065 20” LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . B–1

Recognizing Preset Display Resolutions . . . . . . . . . . . . . B–3

Entering User Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–4

Energy Saver Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–4

C Agency Regulatory Notices

Federal Communications

Commission Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1

Modifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–2

Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–2

Declaration of Conformity for Products Marked with the FCC

Logo (United States Only) . . . . . . . . . . . . . . . . . . . . . . . . C–2

Materials Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3

Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3

Avis Canadien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3

European Union Regulatory Notice . . . . . . . . . . . . . . . . . C–3

Disposal of Waste Equipment by Users in Private Household

iv User Guide

in the European Union . . . . . . . . . . . . . . . . . . . . . . . . . . . C–4

Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–5

Korean Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–5

Power Cord Set Requirements . . . . . . . . . . . . . . . . . . . . . C–5

Japanese Power Cord Requirements . . . . . . . . . . . . . C–6

D LCD Monitor Quality and Pixel Policy

User Guide v

Product Features

The Flat Panel Monitor LP2065 has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include:

■ Large 20.1-inch (51 cm) viewable area display.

■ 1600 × 1200 resolution, plus full-screen support for lower

resolutions.

■ Wide viewing angle to allow viewing from a sitting or

standing position, or moving side-to-side.

■ Pivot capability to rotate display to portrait mode.

■ Tilt, swivel, and height adjustment capabilities.

■ Removable stand with quick release mechanism and VESA

100mm mounting holes for flexible mounting solutions.

■ Video inputs support DVI analog and digital signal inputs.

■ Two DVI-I to VGA signal cables and two DVI-Digital signal

cables included.

■ USB 2.0 hub with one upstream (connects to the computer)

and four downstream (connects to USB devices) ports.

■ USB cable included to connect the monitor’s USB hub to the

USB connector on the computer.

■ Accessory rail on monitor to accept optional mounted

devices, such as an HP speaker bar.

■ Plug and play capability if supported by your system.

User Guide 1–1

Product Features

■ On-Screen Display (OSD) adjustments in English, Dutch,

French, German, Italian, Japanese, and Spanish for ease of set-up and screen optimization.

■ Software and documentation CD that includes monitor driver

software and product documentation.

■ Energy saver feature to meet requirements for reduced power

consumption.

■ AssetControl

■ Compliant with the following regulated specifications:

❏ European Union CE Directives

❏ Swedish MPR II 1990

❏ Swedish TCO Requirements

1–2 User Guide

Safety and Maintenance

Guidelines

Important Safety Information

A power cord is included with your monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with your monitor, refer to the “Power Cord Set Requirements” section in Appendix C.

WARNING: To reduce the risk of electric shock or damage to your

equipment, do not disable the power cord grounding feature. This equipment is designed to be connected to a grounded (earthed) power outlet that is easily accessible to the operator. The grounding plug is an important safety feature.

WARNING: For your safety, be sure that the power outlet you plug

the power cord into is easily accessible and located as close to the equipment as possible. When you need to disconnect the power to the equipment, unplug the power cord from the power outlet by grasping the plug firmly. Never pull on the cord.

User Guide 2–1

Safety and Maintenance Guidelines

CAUTION: For the protection of your monitor, as well as your

computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replacement Policy so you can replace your equipment if surge protection fails.

Maintenance Guidelines

To enhance the performance and extend the life of your monitor:

■ Do not open your monitor cabinet or attempt to service this

product yourself. Adjust only those controls that are covered in the operating instructions. If your monitor is not operating properly or has been dropped or damaged, contact your HP authorized dealer, reseller, or service provider.

■ Use only a power source and connection appropriate for this

monitor, as indicated on the label/back plate of the monitor.

■ Be sure the total ampere rating of the products connected to

the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device.

■ Install your monitor near an outlet that you can easily reach.

Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.

■ Turn your monitor off when not in use. You can substantially

increase the life expectancy of your monitor by using a screen saver program and turning off the monitor when not in use.

2–2 User Guide

■ Slots and openings in the cabinet are provided for ventilation.

These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.

■ Do not drop your monitor or place it on an unstable surface.

■ Do not allow anything to rest on the power cord. Do not walk

on the cord.

■ Keep your monitor in a well-ventilated area, away from

excessive light, heat or moisture.

■ When removing the monitor base, you must lay the monitor

face down on a soft area to prevent it from getting scratched, defaced, or broken.

Cleaning the Monitor

1. Turn off the monitor and the computer.

2. Unplug the monitor from the wall outlet.

3. Clean the monitor plastics with a clean cloth dampened with water.

Safety and Maintenance Guidelines

4. Clean the monitor screen with an antistatic screen cleaner.

CAUTION: Do not use benzene, thinner, ammonia, or any other

volatile substances to clean your monitor or the screen. These chemicals may damage the cabinet finish as well as the screen.

Shipping the Monitor

Keep the original packing box in a storage area. You may need it later if you move or ship your monitor.

User Guide 2–3

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below.

Be sure the master power switch, located on the rear panel of the

✎

monitor, is in the off position. The master power switch turns off all power to the monitor.

Installing the Monitor Pedestal

Do not install the pedestal if the monitor will be used on a wall,

✎

swing arm, or other mounting fixture; instead see the section on “Mounting the Monitor” in this chapter.

1. Using both hands, position the monitor over the pedestal base.

CAUTION: Do not touch the surface of the LCD panel. Pressure on

the panel may cause non-uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its normal condition.

User Guide 3–1

Setting Up the Monitor

2. Press down firmly on the monitor to lock the pedestal base in place. When the base locks, it will make a clicking sound.

Inserting the Monitor into the Pedestal Base

Be sure the pedestal base is securely locked before continuing

✎

with the setup.

3–2 User Guide

Rear Components

Component Function

Setting Up the Monitor

1 Cable Lock

Provision

2 Master Power

Switch

3 AC Power

Connector

4 DVI-I Connectors Connects the DVI-I to VGA signal cable or DVI-D signal

5 USB Upstream

Connector

User Guide 3–3

Provides slot for use with cable security locks.

Turns off all power to the monitor.

Connects the AC power cord to the monitor.

cable to the monitor.

Connects the monitor USB hub to a host USB port/hub.

Setting Up the Monitor

Component Function

6 USB Downstream

Connectors

7 USB Downstream

Connectors (side panel)

Connects optional USB devices to the monitor.

Selecting the Signal Connectors and Cables

The monitor features two DVI-I connectors capable of supporting either analog or digital input.

The video mode supported by the DVI-I connector is determined by the video cable used.

■ For digital operation, use the DVI-D signal cable provided.

Connect the DVI-D signal cable to a DVI-I connector on the monitor and the other end to the DVI connector on the computer.

■ For analog operation, use the DVI-I to VGA signal cable

provided (pre-attached to monitor). Connect the DVI-I to VGA signal cable to the video connector on the computer.

The monitor will automatically determine which inputs have valid video signals. The inputs can be selected through the On-Screen Display (OSD) feature by pressing the Input Select button on the front panel.

To use the DVI-D signal cable, you must first remove the DVI-I

✎

to VGA signal cable that is pre-attached to the monitor.

3–4 User Guide

Detaching the DVI-I to VGA Signal Cable

Setting Up the Monitor

Connecting the DVI-D Signal Cable

User Guide 3–5

Setting Up the Monitor

Connecting the Monitor

1. Place the monitor in a convenient, well-ventilated location near your computer.

2. Connect one end of the USB hub cable to the USB connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor.

Connecting the USB Cable

WARNING: To reduce the risk of electric shock or damage to your

equipment:

■ Do not disable the power cord grounding plug. The grounding

plug is an important safety feature.

■ Plug the power cord into a grounded (earthed) electrical outlet

that is easily accessible at all times.

■ Disconnect power from the monitor by unplugging the power

cord from the electrical outlet.

■ Do not place anything on power cords or cables. Arrange them

so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug.

3–6 User Guide

Setting Up the Monitor

3. Connect one end of the power cable to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet.

Connecting the Power Cable

4. Place the cables through the cable management channel on the back of the monitor base.

Using the Cable Management Feature

User Guide 3–7

Setting Up the Monitor

5. Adjust the monitor as needed for your comfort using the monitor’s tilt, swivel, height, and pivot adjustment capabilities.

Tilting the Monitor

Swiveling the Monitor

3–8 User Guide

Adjusting the Height

Setting Up the Monitor

User Guide 3–9

Setting Up the Monitor

You can change your monitor’s viewing position to portrait. To

✎

rotate your display and view information on your screen in portrait mode, you will need to install the Pivot software available on www.hp.com/support or from the Portrait Display Web site, www.portrait.com. On the HP Web site, follow the links for your monitor to the software and drivers download page.

Pivoting the Monitor

6. Press the power switch to turn on the computer, and then press the master power switch on the rear of the LCD and the power button on the front of the monitor.

CAUTION: Burn-in image damage may occur on monitors that

display the same static image on screen for a prolonged period of time. To avoid burn-in image damage on your monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is a condition that may occur on all LCD screens.

3–10 User Guide

+ 46 hidden pages