Country nameCity nameCountry nameCity nameCountry nameCity name
AfghanistanKabul
Aregentina
Australia
Austria
Bangladesh
Belgium
Brazil
Canada
Czech
Denmark
Egypt
Finland
France
Buenos Aires
Canberra
Sydney
Vienna
Dhaka
Azores
Brussels
Rio de Janeiro
Montreal
Prague
Copenhagen
Cairo
Helsinki
Paris
IranTehran
Ireland
Italy
JapanTokyo
KuwaitKuwait
LebanonBeirut
MexicoMexico City
NetherlandsAmsterdam
New ZealandAuckland
People's Republic
of China
PhilippinesManila
PortugalLisbon
RussiaMoscow
Republic of Korea Seoul
Dublin
Rome
Beijing
Hong Kong
Taiwan
Thailand
UAEAbu Dhabi
UKLondon
USA
Taipei
Bangkok
Anchorage
Boston
Chicago
Dallas
Denver
Detroit
Guam
Honolulu
Los Angeles
New York
Seattle
Germany
Appendix
Greece
Hungary
India
Indonesia
278
Berlin
Athens
Budapest
New Delhi
Jakarta
Saudi ArabiaJedda
SingaporeSingapore
SpainMadrid
Sri Lanka
SwedenStockholm
Colombo
Venezuela
Viet Nam
Washington D.C.
Caracas
Hanoi
Appendix
Video-phone
During a call
During a Video-phone call
While using i-appli
During i-mode
During a packet transmission
with PC connection
Transmission Added
Current Transmission
Voice calli-modei-applii-mode mail
Packet transmission
SMS
OutgoingIncomingOutgoingIncomingSending
Receiving
SendReceiveSending
Multiaccess Combination Patterns
You can simultaneously use a voice call and packet transmission (i-mode, i-mode mail, etc.) as well as SMS with the multiaccessing
function on the FOMA phone. The available combinations of operations for the multiaccessing function are shown below:
O : Available x : Not available – : The combination is functionally not possible.
1: If you have signed up for Call Waiting Service, you can make another voice call with the current voice call put on hold.
2: If you have signed up for “Voice Mail” or “Call Forwarding Service”, and you have not yet activated either service, you can answer
another incoming call after ending the current transmission.
3: You can check the missed call after ending a call.
4: You cannot use this menu during communicating i-appli.
5: The message will be stored in i-mode center with a mark on upper of screen.
(The mark is not displayed on the top of the screen during a packet transmission connecting with a personal computer.)
6: You cannot receive message while downloading.
7: You can receive SMS after ending current transmission.
8: You cannot activate i-appli which needs data communication while transmitting by packet.
9: If i-appli runs without connecting the network, the packet transmission cannot be activated.
10: You can activate i-appli only if you call from site of i-mode.
11: You can send i-mode mail or i-appli if you compose the mail from the submenus of i-mode browser. You can insert the
displayed site or URL into the body of mail.
Appendix
279
Appendix
You can confirm the functions running.
You can switch functions by selecting
the icon.
Select
DoCoMo Ichiro
DoCoMo Saburo
DoCoMo Jiro
DoCoMo Taro
Search phonebook
Phonebook
1/4
You can run multiple functions simultaneously and use
them switching displays with the Multitask function.
1. While running each function, N
Appendix
280
Multitask Combination Patterns
Using Multitask
Icon
2
(
)
Description
Voice call function running
Mail function running
i-mode function
running
i-appli function running
Phonebook function
running
Data box function
running (The player is
playing back)
Icon
1: “Own number” function is not included.
2: If you switch i-mode/ i-appli, the play is ended, and then
3: “Schedule” function is not included.
4: “Custom menu”, “Infrared”.
Description
Multimedia function
running
Scheduler function
running
is displayed.
Icon
Description
Setting the display menu
Setting the setting menu
2. Select ] C ] Select from the following new
functions ] C
Call
The Phone Number entry screen appears. > P48
Icon
Description
Mail
Calculator function
running
Own number is
displayed
Setting the network/
1
Displaying the history
of recent calls
The Mail menu appears. > P137
i-mode
The i-mode menu appears. > P119
i-appli
The Software List screen appears. > P159
Search phonebook
The Phonebook Search screen appears. > P66
Tool function running
Setting the sound
function
4
Melody
The Melody Folder List screen appears. > P176
Camera-mode
The Still Image Finder screen appears. > P110
Scheduler
The Monthly Schedule screen appears. > P191
Calculator
The Calculator screen appears. > P184
Own number
Own number is displayed. > P72
• A few functions are not selected depending on activating the task.
> P282
Information
• To bring up the Task Menu display from Stand-by screen,
press and hold N for 1 or more seconds.
• When you activate multitask function, the submenus can be
used.
• It may be a few cases that you cannot use “Search
phonebook” depending on the memory status of FOMA
handset.
Appendix
Ending the task/ Going back to previous task
1. Q/P
• You can terminate the running function.
• When an application is running or i-mode is being
connected, terminate it by pressing P.
Appendix
281
Appendix
Combination of Functions
You may not be able to select some items on the Task Menu display depending on the added function. The
combinations of active functions and added functions performable from the Task Menu are as follows:
Task menu
item
Active function
Voice
call
Maili-modei-appiPhonebook
During a Voice call
A function in the Mail menu running
A function in the i-mode menu running
A function in the i-appli menu running
A function in a menu other than
the Mail/i-mode/i-appli menu
running
Own number displayed
O : Availablex : Not available
1: You cannot use this menu when activating the menu from phonebook. You cannot use new phonebook function.
2: You cannot use this menu when using phonebook function.
3: You cannot use this menu when activating function from Received calls / Dialed calls / Phonebook.
search
Appendix
• While using or running the following functions, pressing N does not work:
– On displaying the warning message or info message / During a voice call / video-phone call / while making / receiving a call
– During a video-phone call
– During data transmission with a personal computer connected
– While recording moving image
– While copying data / moving data / deleting all data / downloading data
– While exchanging a data via infrared
282
Appendix
During a Voice call
A function in the Mail menu running
A function in the i-mode menu running
A function in the i-appli menu running
A function in a menu other than
the Mail/i-mode/i-appli menu
running
Own number displayed
MelodyCameraScheduleCalculatorOwn number
Task menu
item
Active function
Appendix
283
Appendix
Service Available with FOMA Phones
Available services
Collect call (Calls charged to the receiver)
Directory assistance for ordinary phones
and DoCoMo mobile
phones (Charges apply) (Unlisted phone
numbers cannot be given.)
Telegrams (Charges apply)
Time information (Charges apply)
Weather forecast (Charges apply)
Emergency calls to police
Emergency calls to fire station and ambulance
Emergency calls for accidents at sea
Disaster messaging service (Charges apply)
Information
• When making a collect call (106), the recipient is charged
call fee and a handling fee of ¥90 (¥94.5 including tax) for
each a call. (As of October, 2006)
Appendix
• When using the Directory Assistance Service (104), you
are charged a guidance fee of ¥100 (¥105 including tax)
plus a call fee. For whom having weak eyesight or
handicapped arms, the guidance is available charge free.
For more details, dial 116 (NTT inquiry counter) from
ordinary phones. (As of October, 2006)
8 a.m. to 10 p.m.
Phone number
(No prefix) 106
(No prefix) 104
(No prefix) 115
(No prefix) 117
Area code + 177
(No prefix) 110
(No prefix) 119
(No prefix) 118
(No prefix) 171
• When you dial 110/119/118 from the FOMA phone, you
cannot be located. Tell the staff at the police/fire station
that you are calling from a mobile phone and then notify
your phone number and a correct description of your
current location so that they can call you back to confirm.
Furthermore, remain still while talking to prevent your call
from being disconnected. Do not turn off the power
immediately after the call, but instead make sure that
your phone can receive calls for at least 10 minutes.
• You may not be connected to regional police/fire station
depending on the area from where you call. If this
happens, use payphones or ordinary phones.
• If you use “Call Forwarding Service” for the ordinary
phone and specify a mobile phone or automobile phone
(mobile phone) as the forwarding destination, callers may
hear ringing tone even when the mobile phone is busy,
out of the service area, or the power is turned off
depending on the settings of the ordinary phone/mobile
phone.
• Note that the FOMA phone is not available to 116 (NTT
inquiry counter), Dial Q2, Message Dial, and credit call
services. (You can use auto credit call to the FOMA
phone from ordinary phones or payphones.)
284
Appendix
Introduction of Data Link
“FOMA L602i Data Link” is the program for data such as phonebook, bookmark, contents exchange or transmission
using FOMA phone to a personal computer via connecting the FOMA USB cable (option). You can edit and save the
data using personal computer.
• LG Electronics Japanjp.wowlg.com
For details of installation, environments, operation, and limit, refer to web page or Installation guide and Help file of
Data Link program.
a OS
Windows2000, WindowsXP (Japanese version)
• PC/AT transmission operator supported these OS
a Warranty Limitation
LG Electronics Japan, Inc. shall undertake the flaw warranty of this software, and no other responsibility of a
qualification. Moreover, any problems concerning Data Link software and related data shall be solved by
responsibility and expense of an user.
“FOMA Data Link”
<Customer Service of LG Electronics Japan Inc.>
a Phone number0120-813-023
Can be called from mobile phone or PHS 03-5675-7323
• Please confirm the phone number before you dial.
Information
• While synchronizing Data link, you cannot use other functions.
• You can synchronize Data link only from Stand-by screen.
a Business hours 10:00 a.m. ~ 6:00 p.m.
(Except for Saturday, Sunday and Holiday)
Appendix
285
Appendix
Problem
The FOMA phone cannot be turned on.
(Cannot be used)
Cannot operate by pressing buttons.
Cannot be charged.
appears and a busy tone sounds when
making a call.
Camera images are dark showing nothing when using the
camera/video camera, or making a video-phone call.
"All lock" is displayed on the Stand-by display.
Different ring tones sound for incoming
calls/incoming mails.
Images or melodies selected return to default.
Check point
Make sure the battery pack is attached to the FOMA
phone correctly.
Make sure the battery is fully charged.
Turn off the power once and back on, or reinstall the
battery pack.
Make sure the battery pack is attached to the phone
correctly.
Make sure that the charging is performed in a correct way.
You may be out of the service area or receiving weak
radio waves.
Check the rotation direction of the camera.
This may be because All Lock is activated.
This may be because the call/mail from a party whose ring
tone/mail ring tone is set by Utilities per mail address.
This may be because the call/mail from a party stored in a
group and set with a ring tone/mail ring tone in Group Setting.
Make sure the same UIM that was attached when you
downloaded images or melodies is inserted.
Reference
P39
P42
P39, 44
P39
P40
P31
P29, 109
P99
P65
P71
P38
Troubleshooting
Appendix
286
a When using at overseas
Problem
stays displayed, and the International
Roaming Service cannot be used.
Cannot use Video-phone call/SMS/i-mode/Packet
transmission.
Cannot receive Voice call or Video-phone call.
Remains after returned from overseas.
Check point
Make sure the phone is in the international roaming
service area and is not receiving weak radio waves.
Check the “Network Services User's Guide” (Chapter
of International Service) or WORLD WING's web page
to see whether the service area or the carrier can be
used with your phone.
Change the “Network mode” to “Auto” or to the
network supporting the service.
Check the “Network Services User's Guide” (Chapter
of International Service) or WORLD WING's web page
to see whether the service area or the carrier can be
used with your phone.
Change the “3G”/“GSM/GPRS” to “Auto” or to the
network supporting the service.
Make sure “Barring All Incoming when roam” is not
set to restrict incoming calls.
Make sure “Network mode” is not set to “GSM” only.
Reference
P224
–
P97
–
P97
P207
P97
Appendix
Appendix
Next page
287
Appendix
Error Messages
MessageDescription
Invalid UIM requested software
can't start
Invalid UIM requested service not
available.
Invalid UIM cannot sendCannot operate because of the UIM restrictions. Insert the UIM which
Invalid UIM, incorrect displayCannot display because of the UIM restrictions. Insert the UIM which was
Insert FOMA card(UIM) / Insert UIMNo UIM is inserted. Insert it and try again.
Invalid UIM requested software
can't start
Could not check new messageWas not able to check new message successfully.
i-mode mail service is busy. Please
try again later (555)
Cannot auto start i-appli software because of the UIM restrictions. Insert
the UIM which was inserted when the file was obtained and try again.
Cannot send mail because of the UIM restrictions. Insert the UIM which
was inserted when the mail was created and try again.
was inserted when the file was obtained and try again.
inserted when the mail was created and try again.
Cannot start i-appli software because of the UIM restrictions. Insert the
UIM which was inserted when the file was obtained and try again.
The line facility has trouble or line is very busy. Try again later.
Reference
–
–
–
–
–
–
–
–
Appendix
288
Appendix
MessageDescription
Invalid PUK1 Remaining: XThe entered PIN1 unblock code is wrong. Enter the correct one.
Invalid PIN1 Remaining: XThe entered PIN1code is wrong. Enter the correct one.
Invalid PIN1 (PIN2) Remaning:XIf you enter wrong PIN1/ PIN2 code 3 times in a row, PIN is locked. To
unlock it, enter PIN unlock code.
Invalid PIN1 (PIN2) Remaning:XIf you enter wrong PIN1/ PIN2 code 3 times in a row, PIN is locked. To
unlock it, enter PIN unlock code.
Please check SMS Center settingsThe setting of the SMS center is wrong. Make the settings correctly and
try again.
SSL session cannot be established.Connection was not established to the site which is supporting SSL
communication. Try again.
Root certificate is not valid.The SSL certificate for that server is set to "Invalid" in the "Certificate"
setting. Change the setting to "Valid" and try again.
Please set “To type” receiverThe mail address (To-type) is not entered. Perform a transfer after
entering it.
Reference
P105
P105
P105
P105
P102
–
P128
P149
There is data that can't register to
UIM
URL is too long to registerThe URL for the site is too long, so it cannot be registered.
URL is too long to displayThe URL for the site is too long, so it cannot be displayed.
When you copy the entry of phonebook from handset to UIM, the
character may be entered over the limit or entered the item that cannot
be registered.
–
–
Next Page
Appendix
289
Appendix
MessageDescription
Invalid URLThe URL is not entered correctly. Enter it correctly and try again.
No URL historyURL history is not recorded.
9K size cannot be used"Multi shot" or "Frame shot" cannot be set because "File size restriction"
is set to "9KB". When you want to set "Multi shot" or "Frame shot", set
"File size restriction" to "No restriction".
There is no empty memory.Since the entered memory number was already in use, the phonebook
entry cannot be saved. Enter a different memory number.
Address is not valid (451)SMS was not able to be sent since the address is wrong. Perform the
operation after entering a correct address.
Please input addressNo address is entered. Perform a transmission after entering an address.
Upgrade was terminated.An error occurred, and upgrade was terminated.
No empty memoryAn error occurred so you cannot create the animation.
Cannot start applicationAn error occurred so the i-mode function could not be started.
Incorrect password
The Terminal Security Code is wrong. Enter the correct Terminal Security
Code.
Reference
–
–
P113
–
–
P149
–
–
–
P104
Can't copy some data Continue?
Not movedAn error occurred so the file could not be moved.
Appendix
errorAn error occurred, so the operation of i-appli has been terminated.
Cannot rename Error in renamingAn error occured so you cannot change the name.
290
The data which cannot be copied is included. If you want to copy in this
situation, select “Yes”.
–
–
–
–
Appendix
MessageDescription
No response (408)No response from the site or the Internet web page, so could not
connect. Try again.
Same URL already stored. Overwrite? The same URL is already registered. Select "Yes" to overwrite.
Same address is entered. Send?The same address is entered. Select "Yes" to delete and send.
Exist same fileThe same file name exists. Change the file name to save.
Exist same fileThe same folder name exists. Change the folder name.
Cannot add same desktop iconYou cannot copy the file in the same folder. Select the other folder, and
then
All lockAll lock is set. After releasing the lock, try it again.
MessageF (free) service unavailable while
abroad. Please make sure the Center
Inquiry functions on your mobile phone,
does not check for MessageF, when
making inquires to the i-mode center(556)
You cannot request MessageF overseas. Exclude "MessageF" from
"Request i-mode" items to be used overseas.
I
[Add].
Reference
–
–
–
–
–
–
P99
P129, 155
Not available if size is restrictedYou cannot set "Setting saved quality" if you set "File size restriction" to
other than "No restriction". Before you set it, set "File size restriction" to
"No restriction".
Error in image. Does not work
correctly
Cannot save imageAn error occurred, so the image cannot be saved.
The memory space is not enough or an error occurred, so it does not run
correctly.
P112
–
–
Next Page
Appendix
291
Appendix
MessageDescription
Screen memos is full.The screen memos are saved up to the maximum. By pressing "Yes", you
can delete unnecessary screen memos.
Screen memos is full. Select item to
delete
Failed to load screen memoFailed to read the screen memo so that it cannot be displayed.
No screen memosNo screen memos are saved.
Cannot add screen memoAn error occurred, so the screen memo could not be saved.
Unable to view file. Access to URL
is limited (491)
Failed to launch.Failed to start software because of an error.
Out of service area
Terminal and UIM ID will be sentThis is displayed when IP (Information Service Provider) needs to identify
The screen memos are saved up to the maximum so that it cannot save
any more. Select "Yes" and delete unnecessary screen memos.
The maximum number of accessible times exceeded, so could not be
displayed.
You are either out of the service area or where radio waves are not
received. Move to a place where is displayed.
a customer with "Serial number of your mobile phone/UIM". "Serial
Reference
–
P122
–
–
–
–
–
–
Already downloaded by different
Appendix
UIM. Overwrite?
292
number of your mobile phone/UIM" is sent to IP over the Internet, so it
–
could be perceived by third parties. However, your phone number,
address, age and gender are not notified to the IP (Information Service
Provider) or others by this operation. Select "Yes" to connect.
Already the same i-appli downloaded with a different UIM exists. Select
–
"Yes" to overwrite.
Appendix
MessageDescription
This card cannot be recognizedThe UIM cannot be recognized, or an invalid UIM is inserted. Either
reinsert the UIM or insert a valid UIM and try the operation again.
Cannot zoom in this image sizeSince the "Size" is set to "1280x1024", zoom does not work. Set the
"Size" to "640x480" or smaller to use the zoom.
Certificate is rejected (tampered)Could not connect since an altered SSL certificate was received.
This site is not certified. Do you
connect?
This certificate has expired. Do you
connect?
Root certificate has expired. Do you
connect?
The SSL certificate which is not supported has been received. Select
"Yes" to connect.
You have connected to a site supporting SSL communication without
your clock being set. Please perform "set time".
An expired or premature SSL certificate is received. Select "Yes" to
connect.
The SSL certificate in the FOMA phone has expired. Select "Yes" to
connect.
You have connected to a site supporting SSL communication without
your clock being set. Please perform "Set time".
Reference
P37
P111
–
–
–
–
–
P95
This certificate is not valid for this
URL Do you connect?
A request to send a client certificate occurred while connecting to a site
supporting SSL communication. Select "Yes" to connect.
When the CN of SSL certificate does not match, this error message will
be displayed. Select "Yes" to connect.
–
–
Next Page
Appendix
293
Appendix
MessageDescription
Terminal and UIM ID will be sent.This is displayed at download for an IP (Information Service Provider) to
identify a customer and judge whether it can be used with the mobile phone.
"Serial number of your mobile phone/UIM" is sent to IP over the Internet, so it
could be perceived by third parties. However, your phone number, address,
age and gender are not notified to the IP (Information Service Provider) or
others by this operation. Select "Yes" to connect.
This software will use saved data.
Some media is used only with-in
your phone.
This data cannot be moved
This data cannot be copied
The data may not be replayedSince downloaded data is not valid, it may not be able to be played.
This data cannot be setCannot be set since it is protected with copyright protection technology.
The registered data (such as phonebook, bookmark or schedule) saved in
your mobile phone is used at download.
Since the file protected with copyright protection technology is included, it
cannot be transmitted.
The file cannot be moved since it is protected with copyright protection technology.
The file cannot be copied since it is protected with copyright protection technology.
Reference
–
–
–
–
–
–
–
This data cannot be sentCannot be sent since it is protected with copyright protection technology.
This data cannot be edited
The data cannot be saved. The data from a site cannot be saved since the data is invalid.
Cannot be edited since it is protected with copyright protection technology.
Appendix
294
–
–
–
Appendix
MessageDescription
The data cannot be saved.
Download?
Please set the clock to obtain dataCannot acquire this data because the clock is not set. Perform this
This file cannot be set as a
wallpaper
Failed copy.
Cannot add folder
Too many items are protectedThe maximum number of files that can be protected has been reached so
Unable to connect to server.Connection to the server failed for some reason. Try again
You cannot save the data even though you obtain it because the data
cannot be saved. Select "Yes" to obtain it.
operation after setting the clock.
This file cannot be set as a wallpaper.
Failed to copy the phone number and the mail address since an error
occurred in the data of the phone number and the mail address while
copying the phonebook.
The maximum number of folders that can be created has been reached,
so cannot create any more. Delete unnecessary folders and try again.
cannot protect any more. Release protection for other files and try again.
Reference
–
P95
–
–
–
–
–
Service is not provided
Connection failed
Not supported image sizeYou cannot insert “Frame” since the sizes are “1280X1024”, “640X480”
This motion is not completeCannot save the data since the data was not completely acquired.
This data can no longer be replayed
Delete?
The i-mode service is not subscribed to, so the service cannot be used.
Please subscribe to the service.
Cannot send since you are in an area where SMS service is not provided.
and “Phonebook”.
An i-motion movie with playable frequency reached is selected.
Select "Yes" to delete it.
–
–
–
–
–
Next Page
Appendix
295
Appendix
MessageDescription
Replay period has expired Delete?An i-motion movie with expired replay period is selected. Select "Yes" to
delete it.
Replay period has not yet startedYou are selecting an i-motion movie whose playable date has not yet
come. Check the playable date.
Cannot obtain in error to play backThere is an error in the playback control in i-motion, so cannot be
acquired.
Unable to obtain data due to replay
restriction data error
Can't playAn error occurred, so cannot be played back.
Could not playAn error occurred, so could not be played back.
Size of this page is not supported
Size of this page is not supported
Unable to download. Data exceeds
maximum size. (452)
There is an error in the playback restriction data for i-motion, so cannot
be acquired.
The maximum size of data exceeded, so could not be downloaded
successfully.
The size of data receiving exceeded the maximum size, so could not be
received.
Reference
–
–
–
–
–
–
–
–
URL address changed. (301)The site or Internet web page is automatically transferring the URL or the
URL has been changed. If this is registered in the bookmark or Home,
reregister it.
Connection failed (XXX)Could not connect to the site for some reasons. Try again.
Appendix
File with copyright is deletedA file prohibited to be output from the FOMA phone is attached to the
Could not deleteFailed to delete because an error occurred.
Page is not found. (404)The site was not found. The site may not exist.
296
A 3-digit number is displayed in (XXX).
i-mode mail you are sending.
–
–
–
–
–
Appendix
MessageDescription
No content is available. (204)There is no data to display at the connected site.
No requested softwareThere was no i-appli to start from the site or mail.
No requested software. End?There was no i-appli to start from the site or mail.
Run selected software?The URL to activate i-appi is activated. If you activate it, select “Yes”.
Requested software unavailableCould not start an i-appli from the site or mail.
Unable to retrieve the requested
URL (504)
No Requested File (492)The selected file does not exist in the FOMA phone.
cannot register anymore
Please wait
Low batteryThe battery level is too low to activate the function. After charging it, try
Cannot receive messageFailed to obtain mail.
Could not connect to the specified site for some reason. Try again.
All software programs that can be auto started have already been set up,
so you cannot set up any more.
The line facility has trouble or the line is very busy. Try again later.
again.
Reference
–
–
–
–
–
–
–
–
–
P40
–
No messagesThe received mail has not been saved.
No CertificatesSSL certificate has not been saved.
Inbox message is fullReceived mail is saved up to the maximum number or the memory space
for received mails is already full, and no more can be saved.
Delete unnecessary received mails.
–
–
P141
Next Page
Appendix
297
Appendix
MessageDescription
Schedule is fullThe schedule is set up to maximum, and no more can be set. Delete
unnecessary schedule.
Streaming play not supportedYou cannot play the file because i-motion of streaming type is not
supported.
Invalid data. Connection cannot be
established (400)
Connection interruptedThe line is busy or a transmission error occurred, so connection was
Connection failedAn error occurred during a download. Select “Retry” to reconnect.
Could not access i-mode for some reasons.
A 3-digit number is displayed in (XXX).
interrupted. Try again later.
Radio waves are weak, so cannot connect. Move to a place where radio
waves are strong enough and try again.
Could not connect because of network trouble. Wait a while and try
again.
Cannot connect because of the error in the server's authentication.
Reference
P192, 193
–
–
–
–
–
Time outCould not connect within the time set at “Connection Timeout”. Change
the setting or try the operation again.
Network unavailableYou are either out of the service area or where radio waves are not
received; so you cannot set the network service because the network is
Appendix
Sent message is fullSent mails was saved up to the maximum number, and no more mail can
298
not connected. Move to a place where radio waves can be reached.
be saved. Delete unnecessary saved mail.
P129
–
P146
Appendix
MessageDescription
Sending errorA sending error occurred.
Address is not valid (451)Could not send the message correctly. Check the address and send
again.
Transmission failedThe mail could not be sent correctly.
Transmission failed (XXX)
Server is full (551)The recipient's mail is full.
No messagesSent mail has not been saved.
Software updatedThe S/W is not updated so you cannot activate the function.
Application(s) exist. Folder can't be
deleted.
The software contains an error.There is an error in the software, so the folder download and version
This software contains an error.
Unable to download.
A 3-digit number is displayed in (XXX).
Software is saved in the folder so the folder cannot be deleted. Delete the
software and try again.
upgrade cannot be performed.
There is an error in the software, so download and version upgrade
cannot be performed.
Reference
–
–
–
–
–
–
P162
–
–
Memory full. Overwrite existing
software?
This software is not supported by
this phone.
Installation cancelledAn error occurred, so downloading was interrupted.
Already downloaded.The same version of the software has already been downloaded.
i-mode mail service is busy. Please
try again later(553)
Memory for storing software is not enough, so no more can be saved.
Delete unnecessary software.
The software to download or to update the version is not compatible with
this FOMA phone.
The line is very busy. Try again later.
P162
–
–
–
–
Next Page
Appendix
299
Appendix
MessageDescription
Invalid speed dialNo phonebook entry with a memory number corresponding to the
number entered on the Phonebook Entry display has been registered.
Security code is wrongThe Terminal Security Code is wrong. Enter the correct Terminal Security
Code.
Not allowed
Call rejected
Interrupted
Connection interrupted. Retry?An error occurred during Infrared communication, so transmission has
Could not make a phone call since the connection to the network failed.
Try making the call again.
Rejected a call when incoming call from the other party not registered in
phonebook. To receive a call, set “Memory reject call” to “Permit”.
Rejected a call from the other party registered “Reject on list”.
Rejected a call when “Reject all calls” sets to “Disconnect call”.
The i-mode inquiry was suspended for some reason. Try the operation
again.
been suspended. Select "Yes" to retry the connection.
Reference
P64
P104
–
P90
P90
P90
–
–
InterruptedAn error occurred during Infrared communication, so Infrared reception
has been suspended.
Appendix
This data cannot be sentThe file cannot be sent from the FOMA phone, so you cannot send a mail
attaching the file.
Begin data exchange?The message to activate infrared function is displayed. Select “Yes” to
activate this function.
Battery low
300
The battery level is low. Perform the operation after charging the battery.
–
–
P182
P40
Appendix
MessageDescription
Data full
Invalid data
Receiving canceled
Low battery Exit camera-modeBecause the battery level is low, the camera is terminated. Try again after
Low battery Cannot start cameramode
Attached file size is over.
Cannot attach more than file
Delete attached file
Delete end the phone number is too
long
Data is stored to the maximum, so cannot save any more. Delete
unnecessary data.
An invalid data has been downloaded.
Could not obtain because of invalid data.
charging the battery.
The remaining battery level is getting low. Perform the operation after
charging the battery.
The file size of the message you attempt to send exceeds the maximum size.
No attachable files have been saved.
The file was deleted because there was an attachment with UIM restrictions.
The number of digits of the phone number entered in the address of SMS
message by looking up the phonebook exceeds the maximum number of
characters that can be entered.
Reference
P141,
162, 168,
169, 175
–
–
P40
P40
P151
–
–
–
Failed to copy the phone numberThe phone number failed to be copied because there was an error in the
data of the phone number while it was copied to the phonebook.
Registration num is over Can't copyThe phone book memory in the UIM is full, so the phone book cannot be
copied. Try again after deleting unnecessary phonebook.
Memory is fullSince the memory of the selected storage place is full, the phone book
cannot be stored. Perform the operation after deleting unnecessary
phonebook entries.
–
P68
P68
Next Page
Appendix
301
Appendix
MessageDescription
Registration is in progress (554)
Not registeredAn error occurred so the data cannot be registered.
Cancel and discard work in
progress?
Enter name.The name of the phonebook is not entered. Save after entering a name.
Too much data was enteredToo many characters have been entered in the text box or URL, so it
Input error (205)The data (such as text) entered and transmitted from a site are wrong.
Authentication type is not
supported(401)
InvalidAn error occurred so you cannot register it.
Auth. password wrong. Retry?The authentication password entered is incorrect. Select “Yes” to
Cannot operate because the user is being registered. Wait a while and try
again.
You are about to terminate the edited content without saving.
Select "Yes" to terminate the content without saving.
cannot be sent. Reduce the number of characters to send.
Check the entered contents and try again.
Cannot connect because the authentication type is not supported.
continue.
Reference
–
–
P64
–
–
–
–
P184
Authentication canceled (XXX)This will be displayed when “Cancel” is selected from the authentication
screen. A 3-digit number is displayed in (XXX).
Enter correct Network Security
Code
Appendix
No network found
No response from network. Activate
manually?
302
The Network Security Code is wrong. Enter the correct Network Security
Code.
You cannot set the network service because the network is not
connected. Please wait a while and try again.
Cannot search for the network automatically.To search manually, select "Yes".
–
P104
–
P96
Appendix
MessageDescription
Password is not correct.
Password is not correct. (401)
Select ON for caller ID notificationCannot notify the phone number. After setting on in caller ID notification,
File error
Invalid FileCannot operate since the file is corrupted.
Invalid File (493)
The file is not supported.A file that cannot be set is selected.
Invalid dataBecause the file is invalid, cannot be displayed/played/saved.
File size is too bigThe file is too big to attach to mail.
Image with digital right is includedSince the file protected with copyright protection technology is included in
File is deletedThis is displayed when incoming mail with a file attached is forwarded.
The entered password is wrong. Enter the correct password.
try again.
Because the file has an error, it cannot be saved.
the folder, animation cannot be created. Select a file with no restrictions.
Perform attaching operation in order to attach the file.
Reference
–
P202
–
–
–
–
–
–
P150
Enter file nameFile name has not been entered. After entering file name, try again.
Can't attach fileThe file cannot be attached since it will exceed the size of mail that can
be sent.
Cannot read file Unknown file
format
Can't create folder. Folder already
exists.
This file format is not supported in this FOMA phone.
The folder cannot be created since there is already a folder with the same
name. Change the name.
P169, 170,
174
–
–
–
Next Page
Appendix
303
Appendix
MessageDescription
Can't rename folder. Folder already
exists.
Cannot delete folderMail is saved in the folder, so the folder cannot be deleted. Delete the
Incorrect folder nameA character invalid for a folder name is included.
Cannot create folderThe maximum number of folders are created, so cannot create any more.
Can't create folder any moreAn error occurred so the folder was not created.
Bookmark is full. Select item to
delete
Cannot add bookmarkAn error occurred, so could not bookmark.
No bookmarksBookmark not registered. Register bookmark beforehand.
Unknown browser errorAn unknown error occurred.
Invalid contentInvalid page, so cannot be displayed.
The folder cannot be created since there is already a folder with the same
name. Change the name.
folder after deleting all the mail in the folder.
Delete unnecessary folders and try again.
The maximum number of data items are bookmarked, so cannot
bookmark any more. Delete unnecessary bookmarks by selecting “Yes”.
Reference
–
P141
–
P141,161,
168
–
P121
–
P130
–
–
Total size is too bigTotal page size exceeded the maximum size, so it cannot be received
successfully.
Your data will be lost. Quit?You are about to terminate without saving the edited contents such as
phonebook entries by pressing
Appendix
Cancel editing?You are about to terminate without saving the edited contents. If you do
Home page not set.Home is not set. Perform the operation after setting Home.
304
without saving the contents.
not want to save it, select “Yes”. To continue editing, select “No”.
AorQ
. Select "Yes" to terminate
–
–
P128
Appendix
MessageDescription
Home page disableThe URL registered in Home is not entered correctly. Perform the
operation after entering it correctly.
Save failed.An error occurred, so could not save.
No messagesNo unsent mail messages saved.
No save areaCannot save because there is no room available in the storage area.
Delete unnecessary files.
Message too long Cannot enterCannot enter because the text size exceeded 70 full-pitch characters or
160 half-pitch characters when an SMS message was transmitted.
Message too long
No space to attach signature
Message too long End of message
will be deleted
The mail size exceeds 5,000 full-pitch characters if a signature is pasted, so
it cannot be pasted. Make the text of the message shorter or delete attached
data to reduce the size down to less than 5,000 full-pitch characters.
The mail size exceeds 5,000 full-pitch characters if a signature is pasted, so
it cannot be pasted. Make the text of the message shorter or delete attached
data to reduce the size down to less than 5,000 full-pitch characters.
When received mail is replied to with quote or forwarded, the message will exceed
5,000 full-pitch characters, so the last part of the message will be truncated.
Reference
P128
–
–
–
–
P156
P156
–
Cannot edit messageThe text cannot be entered because data equivalent to the size of 5,000
full-pitch characters is attached to the mail.
Manner mode Play with sound?The FOMA phone is set to manner mode. When you play the streaming
file with sound, select “Yes”.
Play with sound?The FOMA phone is set to manner mode. Select "Yes" to play sound of
moving images or a melody.
Outbox or Unsent message is fullCannot save the mail because the unsent message is full. Delete the
unnecessary unsent mail.
–
P148
Next Page
Appendix
305
Appendix
MessageDescription
There's empty input. Input required
Empty message cannot be savedCannot be saved because nothing is entered to address/subject/text field
Invalid data. Data size is not
supported.
Invalid data. Data size is not
supported. (XXX)
Nuisance call barring service denied
Failed to copy mail address
Please make sure "Receive option"
in "Mail Settings" is turned ON
Message data is broken
There are items not entered. Perform the operation after entering these items.
and no file is attached to the message.
There is an error in the received data, so it cannot be displayed. The
received data will be destroyed. A 3-digit number is displayed in (XXX).
The Nuisance call barring service is not subscribed to so it cannot be set.
In order to use this feature, please subscribe to the Nuisance call barring
service.
Failed to copy the mail address because an error occurred in the data of
the mail address during the copy operation to the phonebook.
The Receive Option setting is set to "OFF". Change the setting to "ON"
and try again.
An error occurred so the mail cannot be displayed or created.
Reference
–
P149
–
P202
–
P154
–
10 files limit for message
Folder is full
Appendix
306
The maximum number of files attachable to mail is exceeded. The
maximum number of files that can be attached to mail is 10.
Inbox is full, so no new message can be received. Delete unnecessary
received mails.
The message data is corrupted and cannot be displayed.Message data is broken
There is no MessageF saved.No messages F
There is no MessageR saved.No messages R
P150
P141
–
–
–
Appendix
MessageDescription
Memory fullBecause the memory of the FOMA phone is full, the data received by
Infrared communication or moving images cannot be saved. Perform the
operation after deleting unnecessary data.
Because the memory is full, the shot still images cannot be saved.
Because the memory is full, the edited still images cannot be saved.
Not enough memory Can't save
Not enough memory
Exceeds limit. Unable to paste all
letters. Paste?
Exceeds limit. Unable to paste.
Because there is not enough memory, each function cannot be started.
Because there is not enough memory, no still images can be taken.
Because the number of characters transmittable is exceeded, the end of
text will be truncated. Select "Yes" to send.
Because the maximum number of characters is exceeded, part of the text
could not be pasted. Select "Yes" to paste the portion that can be pasted.
Because the maximum number of characters is exceeded, the text
cannot be pasted. Perform the operation after deleting unnecessary text
by pressing
Q
.
Reference
P68,121,
168, 169,
175
–
–
–
–
–
–
Not enough memory Please delete
some files
The memory is full. After deleting the unnecessary files, try again.
P168, 169,
175
Next Page
Appendix
307
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.