You can simultaneously use a voice call and packet transmission (i-mode, i-mode mail, etc.) as well as SMS with the multiaccessing
function on the FOMA phone. The available combinations of operations for the multiaccessing function are shown below:
Transmission added
Current Transmission
Voice calli-modei-applii-mode mail
OutgoingIncomingOutgoingIncomingSending
Video-phone
During a call
During a Video-phone call
While using i-appli
During i-mode
During a packet transmission
with PC connection
O : Available x : Not available – : The combination is functionally not possible.
1: If you have signed up for Call Waiting Service, you can make another voice call with the current voice call put on hold.
2: If you have signed up for “Voice Mail” or “Call Forwarding Service”, and you have not yet activated either service, you can answer
another incoming call after ending the current transmission.
3: You can check the missed call after ending a call.
4: You cannot use this menu during communicating i-appli.
5: The message will be stored in i-mode center with a mark on upper of screen.
6: You cannot receive message on downloading.
Appendix
7: You can receive SMS after ending current transmission.
8: You cannot activate i-appli which needs data communication during transmitting by packet.
9: If i-appli runs without connecting the network, the packet transmission can be activated.
10: You can activate i-appli if you call from site of i-mode.
11: You can send i-mode mail or i-appli if you compose the mail from the submenus of i-mode browser. You can insert the
displayed site or URL into the body of mail.
Receiving
SMS
SendReceiveSending
Packet transmission
268
Appendix
Multitask Combination Patterns
You can run multiple functions simultaneously and use
them switching displays with the Multitask function.
Using Multitask
1. While running each function, N
ȹ
DoCoMo Ichiro
DoCoMo Saburo
DoCoMo Jiro
DoCoMo Taro
Search phonebook
Icon
Ȝȥ
You can confirm the functions running.
You can switch functions by selecting
Phonebook
Select
the icon.
Description
Voice call function running
Mail function running
Icon
Description
Calculator function
running
Icon
1: “Own number” function is not included.
2: If you switch i-mode/ i-appli, the play is ended, and then
3: “Schedule” function is not included.
4: “Custom menu”, “Infrared”, “Calculator”, “miniSD memory
card” are not included.
Description
Multimedia function
running
Scheduler function
running
is displayed.
Icon
Description
Setting the display menu
Setting the setting menu
2. Select ] C ] Select from the following new
functions ] C
Call
The Phone Number entry display appears. > P46
Mail
The Mail menu appears. > P127
(2)
i-mode function
running
i-appli function running
Phonebook function
running
Data box function
running
Station function
running
3
Own number is
displayed
Setting the network/
1
Displaying the history
of recent calls
Tool function running
Setting the sound
function
4
i-mode
The i-mode menu appears. > P109
i-appli
The Software List display appears. > P147
Search phonebook
The Phonebook Search display appears. > P60
• Although Search phonebook is normal application, it can be
always activated until system memory is available.
Appendix
269
Appendix
Melody
The Melody Folder List display appears. > P164
Camera-mode
The Still Image Finder display appears. > P102
Scheduler
The Monthly Schedule display appears. > P183
Calculator
The Calculator display appears. > P175
Own number
Own number is displayed. > P65
• A few functions are not selected depending on activating the task.
> P271
Information
• To bring up the Task Menu display from Stand-by display,
press and hold N for at least one second.
• When you activate multitask function, the submenus can be
used.
• It may be a few cases that you cannot use “Search
phonebook” depending on the memory status of FOMA
handset.
Appendix
Ending the task/ Going back to previous task
1. Q/P
• You can go back previous menu.
• You can end current task at the same time.
270
Appendix
Combination of Functions
You may not be able to select some items on the Task Menu display depending on the added function. The
combinations of active functions and added functions executable from the Task Menu are as follows:
Task menu
item
Active function
During a Voice call
A function in the Mail menu running
A function in the i-mode menu running
A function in the i-appli menu running
A function in a menu other than
the Mail/i-mode/i-appli menu
running
Own number displayed
O : Availablex : Not available
1: You cannot use this menu when activate the menu from phonebook. You cannot use new phonebook function.
2: You cannot use this menu when you use phonebook function.
• While using or running the following functions, press N does not work:
– On displaying the warning message or info message/ During a voice call/ video-phone call/ while receiving a call
– During a video-phone call
– During data transmission with a personal computer connected
– While recording moving image
– While copying/ moving a data/ While deleting all data/ While downloading the data
– While exchanging a data via infrared
Voice
call
Maili-modei-appiPhonebook
search
Appendix
271
Appendix
Task menu
item
Active function
During a Voice call
A function in the Mail menu running
A function in the i-mode menu running
A function in the i-appli menu running
A function in a menu other than
the Mail/i-mode/i-appli menu
running
Own number displayed
MelodyCameraScheduleCalculatorOwn number
Appendix
272
Appendix
Service Available with FOMA Phones
Available services
Collect call (Calls charged to the receiver)
Directory assistance for ordinary phones
and DoCoMo mobile
phones (Charges apply) (Unlisted phone
numbers cannot be given.)
Telegrams (Charges apply)
Time check (Charges apply)
Weather forecast (Charges apply)
Emergency calls to police
Emergency calls to fire station and ambulance
Emergency calls for accidents at sea
Disaster messaging service (Charges apply)
8 a.m. to 10 p.m.
Information
• When making a collect call (106), the recipient is charged
call fee and a handling fee of ¥90 (¥94.5 with tax) for
each a call. (As of March 2006)
• When using the Directory Assistance Service (104), you
are charged a guidance fee of ¥100 (¥105 with tax) plus a
call fee. For whom having weak eyesight or handicapped
arms, the guidance is available charge free. For more
details, dial 116 (NTT inquiry counter) from ordinary
phones. (As of March 2006)
Phone number
(No prefix) 106
(No prefix) 104
(No prefix) 115
(No prefix) 117
Area code + 177
(No prefix) 110
(No prefix) 119
(No prefix) 118
(No prefix) 171
• When you dial 110/119/118 from the FOMA phone, you
cannot be located. Tell the stuff at the police/fire station
that you are calling from a mobile phone and then notify
your phone number and a correct description of your
current location so that they can call you back to confirm.
Furthermore, remain still while talking to prevent your call
from being disconnected. Do not turn off the power
immediately after the call, but instead make sure that
your phone can receive calls for at least 10 minutes.
• You might not be connected to regional police/fire station
depending on the area from where you call. If this
happens, use payphones or ordinary phones.
• If you use “Call Forwarding Service” for the ordinary
phone and specify a mobile phone or automobile phone
(mobile phone) as the forwarding destination, callers may
hear ringing tone even when the mobile phone is busy,
out of the service area, or the power is turned off
depending on the settings of the ordinary phone/mobile
phone.
• Note that the FOMA phone is not available to 116 (NTT
inquiry counter), Dial Q2, Message Dial, and credit call
services. (You can use auto credit call to the FOMA
phone from ordinary phones or payphones.)
Appendix
273
Appendix
Introduction of Data Link
“FOMA L601i Data Link” is the program for data such as phonebook, bookmark exchange or transmission by using
FOMA phone to a personal computer via connecting the FOMA USB cable (Option). You can edit and save the data
by using personal computer.
• LG Electronics Japanjp.wowlg.com
For details related to installation, environments, operation, and limitation, refer to homepage or Installation guide
and Help file of Data Link program.
LG Electronics Japan, Inc. shall undertake the flaw warranty of this software, and no other responsibility of a
qualification. Moreover, any problems concerning Data Link software and related data shall be solved by
responsibility and expense of an user.
“FOMA Data Link”
<Customer Service of LG Electronics Japan Inc.>
a Phone number0120-813-023
• Please confirm the phone number before you dial.
Appendix
274
Can be called from mobile phone or PHS 03-5675-7323
a Business hours 10:00 a.m ~ 6:00 p.m
(Except for Saturday, Sunday and Holiday)
Troubleshooting
Appendix
Problem
The FOMA phone does not turn on.
(Cannot use)
Cannot operate by pressing buttons.
Cannot charge.
appears and a busy tone sounds when
making a call.
Camera images are dark showing nothing when using the
camera/video camera, or making a video-phone call.
"All lock" is displayed on the Stand-by display.
Different ring tones sound for incoming
calls/incoming mail.
Make sure the battery pack is attached to the phone
Turn off the power once and back on, or reattach the
Make sure the battery pack is attached to the phone
Make sure that the charging is done in a correct way.
You may be outside the service area or receiving weak
tone/mail ring tone is set by Utilities per mail address.
Check point
correctly.
Make sure the battery is fully charged.
battery pack.
correctly.
radio waves.
Check the rotation direction of the camera.
This may be because All Lock is activated.
This may be the call/mail from a party whose ring
Reference
P38
P41
P38, 43
P38
P39
P31
P29, 101
P90
P59
Images or melodies selected return to default.
This may be the call/mail from a party stored in a group
and set with a ring tone/mail ring tone in Group Setting.
Make sure the UIM that was inserted when you
downloaded images or melodies is inserted.
P64
P37
Next page
Appendix
275
Appendix
a When using at overseas
Problem
keeps displaying,
and the International Roaming
Service cannot be used.
Cannot use Video-phone
call/SMS/i-mode/Packet
transmission.
Check point
Make sure the phone is in the international roaming
service area and is not receiving weak radio waves.
Check the "International Roaming Service Manual" or
WORLD WING's web site to see whether the service
area or the carrier can be used with your phone.
Change the "Network mode" to "Auto" or to the
network supporting the service.
When you are using the FOMA phone for the first time
after leaving Japan and entered overseas, power
cycle the phone.
Check the "International Roaming Service Manual" or
WORLD WING's web site to see whether the service
area or the carrier can be used with your phone.
Change the "Network mode" to "Auto" or to the
network supporting the service.
Reference
P215
–
P88
–
–
P88
Appendix
Cannot receive Voice call or
Video-phone call.
Remains after
returned from overseas.
*You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166
276
Make sure "Barring All Incoming when roam" is not
P198
set to restrict incoming calls.
Make sure "Network mode" is not set to "GSM".
P88
Error Messages
Appendix
MessageDescription
Invalid UIM requested software
can't start
Invalid UIM requested service not
available.
Invalid UIM cannot sendCannot operate because of the UIM restrictions. Insert the UIM which
Invalid UIM, incorrect displayCannot display because of the UIM restrictions. Insert the UIM which had
Insert FOMA card(UIM) / Insert UIMNo UIM is inserted. Insert it and try again.
Invalid UIM requested software
can't start
Could not check new messageWas not able to connect i-mode successfully.
i-mode mail service is busy. Please
try again later (555)
Cannot auto start i-appli software because of the UIM restrictions. Insert
the UIM which had been inserted when the file was obtained and try
again.
Cannot send mail because of the UIM restrictions. Insert the UIM which
had been inserted when the mail was created and try again.
had been inserted when the file was obtained and try again.
been inserted when the mail was created and try again.
Cannot start i-appli software because of the UIM restrictions. Insert the
UIM which had been inserted when the file was obtained and try again.
The line facility has trouble or line is very busy. Wait a while and try again.
Reference
–
–
–
–
–
–
–
–
miniSD memory card not readyThe miniSD card does not insert into a phone properly. Try again after re-
inserting correctly.
miniSD card ejected
On activating the miniSD memory card, the card is removed. After
inserting the card correctly, operate it again.
–
P168
Next Page
Appendix
277
Appendix
MessageDescription
Invalid PUK1 Remaining: XThe entered PIN1 unblock code is wrong. Enter the correct one.
Invalid PIN1 Remaining: XThe entered PIN1code is wrong. Enter the correct one.
Invalid PIN1 (PIN2) Remaning:XIf you enter wrong PIN1/ PIN2 code over three times, PIN is locked. To
unlock it, you enter PIN unlock code.
Invalid PIN1 (PIN2) Remaning:XIf you enter wrong PIN1/ PIN2 code over three times, PIN is locked. To
unlock it, you enter PIN unlock code.
Please check SMS Center settingsThe setting of the SMS center is wrong. Set the setting correctly and try
again.
SSL session cannot be established.Connection was not established to the site which is supporting SSL
communication. Try again.
SSL session failed.Cannot connect because of the error in the server's authentication.
Root certificate is not valid.The SSL certificate for that server is set to "Invalid" in the "Certificate"
setting. Change the setting to "Valid" and try again.
Please set “To type” receiverThe mail address (To-type) is not entered. Perform a transfer after
entering it.
Reference
P97
P97
P97
P97
P93
–
–
P118
P139
There is data that can't register to
UIM
Appendix
URL is too long to registerThe URL for the site is too long, so it cannot be registered.
URL is too long to displayThe URL for the site is too long, so it cannot be displayed.
278
When you copy the entry of phonebook from handset to UIM, the
character may be inputted over the limitation or inputted the item cannot
be registered.
–
–
Appendix
MessageDescription
Invalid URLThe URL is not entered correctly. Enter it correctly and try again.
No URL historyURL history is not recorded.
9K size cannot be used"Frame shot" cannot be set because "Size restriction" is set to "9Kbyte".
When you want to set "Frame shot", set "Size restriction" to "No
restriction".
There is no empty memory.Since the memory number entered was already in use, so the phonebook
entry cannot be saved. Enter a different memory number.
Address is not valid (451)SMS was not able to be sent since the address is wrong. Perform the
operation after entering a correct address.
Please input addressNo address is entered. Perform a transmission after entering an address.
No empty memoryAn error occurred so you cannot create the animation.
Cannot start applicationAn error occurred so the i-mode function could not be started.
Incorrect password
Can't copy some data Continue?
The Terminal Security Code is wrong. Enter the correct Terminal Security
Code.
The data which cannot be copied is included. If you want to copy in this
situation, select “Yes”.
Reference
–
–
P104
–
–
P139
–
–
P96
–
Not movedAn error occurred so the file could not be moved.
errorAn error occurred, so the operation of i-appli has been terminated.
Cannot rename Error in renamingAn error occured so you cannot change the name.
–
–
–
Next Page
Appendix
279
Appendix
MessageDescription
No response, Rewrite?A time out occurred during a connection of Infrared data, so the
communication was suspended. Select "Yes" to reconnect.
No response (408)No response from the site or the Internet web page, so could not
connect. Try again.
Same URL already stored. Overwrite? The same URL is already registered. Select "Yes" to overwrite.
Same address is entered. Send?The same address is entered. Select "Yes" to delete and send.
Exist same fileThe same file name exists. Change the file name to save.
Exist same fileThe same folder exists. Change the folder name.
Cannot add same desktop iconYou cannot copy the file in same folder. Select the other folder, and then
[Add].
I
All lockAll lock is set. After releasing the lock, try it again.
MessageF (free) service unavailable while
abroad. Please make sure the Center
Inquiry functions on your mobile phone,
does not check for MessageF, when
You cannot request MessageF in abroad. Exclude "MessageF" of
"Request i-mode".
Reference
–
–
–
–
–
–
–
P90
P119, 144
making inquires to the i-mode center(556)
Not available if size is restricted
Appendix
Error in image. Does not work
correctly
Cannot save imageAn error occurred, so the image could not be saved.
280
You cannot set "Setting saved quality" if you "Size" is "No restriction". If
you set it, "Size" is set to "No restriction".
The memory space is short or an error occurred, so does not run
correctly.
P104
–
–
Appendix
MessageDescription
Screen memos is full.The screen memos are saved up to the maximum. By pressing "Yes", you
can delete unnecessary screen memos.
Screen memos is full. Select item to
delete
Failed to load screen memoFailed to read the screen memo so cannot be displayed.
No screen memosNo screen memos saved.
Cannot add screen memoAn error occurred, so the screen memo could not be saved.
Unable to view file. Access to URL
is limited (491)
Failed to launch.Failed to start software because of an error.
Out of service area
Terminal and UIM ID will be sentThis is displayed when IP (Information Service Provider) needs to identify
The screen memos are saved up to the maximum., so cannot save any
more. Select "Yes" and delete unnecessary screen memos.
The maximum number of accessible times exceeded, so could not be
displayed.
You are either out of the service area or where radio waves are not
received. Move to a place where lights.
a customer with "Serial number of your mobile phone/UIM". "Serial
number of your mobile phone/UIM" is sent to IP over the Internet, so it
could be deciphered by third parties. However, your phone number,
Reference
–
P112
–
–
–
–
–
–
–
Already downloaded by different
UIM. Overwrite?
address, age and gender are not notified to the IP (Information Service
Provider) or others by this operation. Select "Yes" to connect.
Already the same i-appli downloaded from a different UIM exists. Select
"Yes" to overwrite.
–
Next Page
Appendix
281
Appendix
MessageDescription
This card cannot be recognizedThe UIM cannot be recognized, or an invalid UIM is inserted. Either
reinsert the UIM or insert a valid UIM and try the operation again.
Cannot zoom in this image sizeSince the "Size" is set to "1280x1024", zoom does not work. Set the
screen size to "640x480" or smaller and set the zoom.
Certificate is rejected (tampered)Could not connect since an altered SSL certificate was received.
This site is not certified. Do you
connect?
This certificate has expired. Do you
connect?
Root certificate has expired. Do you
connect?
The SSL certificate not supported has been received. Select "Yes" to
connect.
You have connected to a site supporting SSL communication without
your clock being set. Please perform "set time".
An expired or premature SSL certificate is received. Select "Yes" to
connect.
The SSL certificate in the FOMA phone has been expired. Select "Yes" to
connect.
You have connected to a site supporting SSL communication without
your clock being set. Please set the time.
Reference
P36
P104
–
–
–
–
–
P86
This certificate is not valid for this
URL Do you connect?
Appendix
282
A request to send a client certificate occurred while connecting to a site
–
supporting SSL communication. Select "Yes" to connect.
When the CN of SSL certificate does not match, this error message will
–
be displayed.
Appendix
MessageDescription
Terminal and UIM ID will be sent.This is displayed at download for an IP (Information Service Provider) to
identify a customer and judge whether it can be used with the mobile phone.
"Serial number of your mobile phone/UIM" is sent to IP over the Internet, so it
could be deciphered by third parties. However, your phone number, address,
age and gender are not notified to the IP (Information Service Provider) or
others by this operation. Select "Yes" to connect.
This software will use saved data.
Some media is used only with-in
your phone.
Digital right prevent from moving
Digital right prevent from copying
The data may not be replayedSince downloaded data is not valid, it may not be able to be played.
Digital right prevent from playing.
The registered data (such as phonebook, bookmark, schedule) saved in
your mobile phone is used at download. Select "Yes" to download.
Since the file protected with copyright protection technology is included, it
cannot be transmitted.
The file cannot be moved since it is protected with copyright protection technology.
The file cannot be copied since it is protected with copyright protection technology.
Cannot be played since it is protected with copyright protection technology.
Reference
–
–
–
–
–
–
–
Digital right prevent from playing.
Delete?
Digital right prevent from settingCannot be set since it is protected with copyright protection technology.
Digital right prevent from sending.Cannot be sent since it is protected with copyright protection technology.
Digital right prevent from editing
The data cannot be saved. The data from a site cannot be saved to protect from misuse.
The date when the data with replay period was received and the current
date in the FOMA phone differ, so cannot be played. Select "Yes" to
delete.
Cannot be edited since it is protected with copyright protection technology.
–
–
–
–
–
Next Page
Appendix
283
Appendix
MessageDescription
The data cannot be saved.
Download?
Please set the clock to obtain dataCannot acquire this data because the clock is not set. Perform this
This file cannot be set as a
wallpaper
Failed copy.
Cannot add folder
Too many items are protectedThe maximum number of files that can be protected has been reached so
Unable to connect to server.Connection to the server failed for some reason. Try again
Service is not provided
You cannot save the data even though you obtain it because the data
cannot be saved. Select "Yes" to obtain it.
operation after setting the clock.
This file cannot be set as a wallpaper.
Failed to copy the phone number and the mail address since an error
occurred in the data of the phone number and the mail address while
copying the phonebook.
The maximum number of folders that can be created has been reached,
so cannot create any more. Delete unnecessary folders.
cannot protect any more. Release protection for other files and try again.
The i-mode service is not subscribed to, so the service cannot be used.
Please subscribe to the service.
Reference
–
P86
–
–
–
–
–
–
Connection failed
Not supported image sizeYou cannot insert “Frame” due to the size “1280X1024”, “640X480” and
Appendix
This motion is not completeCannot save the data since the data was not fully acquired.
This data can no longer be replayed
Delete?
284
Cannot send since you are in an area where SMS service is not provided.
“Phonebook”.
An i-motion movie with playable frequency reached is selected. It has
already been played back for the specified number of times, so cannot
be played back. Select "Yes" to delete.
–
–
–
–
Appendix
MessageDescription
Replay period has expired Delete?An i-motion movie with expired replay period is selected. Select "Yes" to
delete.
Replay period has not yet startedYou are selecting an i-motion movie whose playable date has not yet
come. Check the playable date.
Cannot obtain in error to play backThere is an error in the playback control in i-motion, so cannot be
acquired.
Unable to obtain data due to replay
restriction data error
Can't playAn error occurred, so cannot be played back.
Could not playAn error occurred, so could not be played back.
Size of this page is not supported
Size of this page is not supported
Unable to download. Data exceeds
maximum size. (452)
URL address changed. (301)The site has been moved, so the URL changed, If this is registered in the
There is an error in the playback restriction data for i-motion, so cannot
be acquired.
The maximum size of data exceeded, so could not be downloaded
successfully.
The size of data receiving exceeded the maximum size, so could not be
received.
bookmark or Home, reregister it.
Reference
–
–
–
–
–
–
–
–
–
Connection failed (403)
File with copyright is deleted
Could not deleteFailed to delete because an error occurred.
Page is not found. (404)The site could not be found. The site may not exist.
Could not connect to the site for some reasons. Try again.
A 3-digit number is displayed in (403).
A file prohibited to be output from the FOMA phone is attached to the
i-mode mail you are sending.
–
–
–
–
Next Page
Appendix
285
Appendix
MessageDescription
No content is available. (204)There is no data for display at the connected site.
No requested softwareThere is no i-appli to start from the site or mail.
No requested software. End?There is no i-appli to start from the site or mail.
Run selected software?The URL to activate i-appi is activated. If you activate it, select “Yes”.
Requested software unavailableCould not start an i-appli from the site or mail.
Unable to retrieve the requested
URL (504)
No Requested File (492)The selected file does not exist in the FOMA phone.
cannot register anymore
Please wait
Low batteryThe battery is too short to activate the function. After charging it, try again.
Cannot receive messageFailed to obtain mail.
Could not connect to the specified site. Please try again.
All software programs that can be auto started have already been set up,
so you cannot set any more.
The line facility has trouble or the line is very busy. Wait a while and try
again.
Reference
–
–
–
–
–
–
–
–
–
P39
–
No messagesThe received mail has not been saved.
No CertificatesSSL certificate is not saved.
Inbox message is fullReceived mail is saved up to the maximum, and no more can be saved.
Delete unnecessary received mail.
Appendix
286
–
–
P131
Appendix
MessageDescription
Schedule is fullThe schedule is set up to maximum, and no more can be set. Delete
unnecessary schedule.
Streaming play not supportedYou cannot play the file because i-motion of streaming type is not
supported.
Invalid data. Connection cannot be
established (400)
No response. Retry?Cannot find another device for Infrared ray transmission. Place the FOMA
Connection interruptedThe line is busy or a transmission error occurred, so connection was
Connection failedAn error occurred during a download. Select "Retry" to reconnect.
Connection failed
Connection failed (562)
Could not access i-mode for some reasons.
A 3-digit number is displayed in (XXX).
phone correctly towards the Infrared port of another device. Select "Yes"
to retry the transmission.
suspended. Wait a while and try again.
Radio waves are weak, so cannot connect. Move to a place where radio
waves are strong enough and try again.
Could not connect because of network trouble. Wait a while and try
again.
Reference
P184, 185
–
–
P174
–
–
–
Time outCould not connect within the time set at "Connection Timeout". Change
the setting or try the operation again.
Network unavailableYou are either out of the service area or where radio waves are not
received; so you cannot set the network service because the network is
not connected. Move to a place where radio waves can be reached.
Sent message is fullSent mail is saved up to the maximum, and no more can be saved.
Delete unnecessary saved mail.
P119
–
P136
Next Page
Appendix
287
Appendix
MessageDescription
Sending errorA sending error occurred.
Address is not valid (451)Could not send the message correctly. Check the address and send
again.
Transmission failedThe mail cannot be sent correctly.
Transmission failed (552)
Server is full (551)The recipient's mail is full.
No messagesSent mail has not been saved.
Software updatedThe S/W is not updated so you cannot activate the function.
Application(s) exist. Folder can't be
deleted.
The software contains an error.There is an error in the software, so download and version upgrade
This software contains an error.
Unable to download.
Memory full. Overwrite existing
software?
Appendix
This software is not supported by
this phone.
A 3 digit number i displayed in (552).
Software is saved in the folder so cannot be deleted. Delete the
software and try again.
cannot be performed.
There is an error in the software, so download and version upgrade
cannot be performed.
Memory for storing software is short, so no more can be saved. Delete
unnecessary software.
The software to download or to update the version is not compatible with
a FOMA phone.
Reference
–
–
–
–
–
–
P150
–
–
P150
–
Installation cancelledAn error occurred, so downloading was suspended.
Already downloaded.The same version of software is already downloading.
i-mode mail service is busy. Please
try again later(553)
288
The line is very busy. Wait a while, try again.
–
–
–
Appendix
MessageDescription
Invalid speed dialNo phonebook entry with a memory number corresponding to the
number entered on the Phonebook Entry display has been registered.
Security code is wrongThe Terminal Security Code is wrong. Enter the correct Terminal Security
Code.
Not allowed
Call rejected
Interrupted
Connection interrupted. Retry?An error occurred during Infrared ray transmission, so transmission has
InterruptedAn error occurred during Infrared ray transmission, so Infrared reception
Could not make a phone call since the connection to the network failed.
Try making the call again.
Rejected a call when incoming call from the other party not registered in
phonebook. To receive a call, set “Memory reject call” to “Off”.
Rejected a call from the other party registered “Reject on list”.
Rejected a call when “Reject all calls” sets to “Disconnect call”.
The i-mode inquiry was suspended for some reason. Try the operation
again.
been suspended. Select "Yes" to retry the connection.
has been suspended.
Reference
P58
P96
–
P82
P81
P81
–
–
–
This data cannot be sentThe file is not sent except of FOMA phone, so you cannot send a mail
with attaching the file.
Begin data exchange?The message to activate infrared function is displayed. If you select “Yes”,
you can activate this function.
Battery low
The remaining battery is low. Perform the operation after the charging.
–
P39
Next Page
Appendix
289
Appendix
MessageDescription
Data full
Invalid data
Receiving canceled
Low battery Exit camera-modeBecause the battery is short, the camera is ended. After charging it, try
Low battery Cannot start cameramode
Attached file size is over.
Cannot attach more than file
Delete attached file
Delete end the phone number is too
long
Data are stored to the maximum, so cannot save any more. Delete
unnecessary data.
An invalid data has been downloaded.
Could not acquire because of invalid data.
again.
The remaining battery level is getting low. Perform the operation after the
battery is charged.
The file size of the message you attempt to send exceeds the maximum size.
No attachable files are saved.
The file was deleted because there was an attachment with UIM restrictions.
The number of digits of the phone number entered in the address of SMS
message by looking up the phonebook exceeds the maximum number of
characters that can be entered.
Reference
P131,
150, 156,
158, 162
–
–
P39
P39
P140
–
–
–
Failed to copy the phone numberThe copy of the phone number failed because there was an error in the
data of the phone number while it was copied to the phonebook.
Registration num is over Can't copyThe phone book memory in the UIM is full, so the phone book cannot be
Appendix
Memory is fullSince the memory of the selected storage place is full, the phone book
290
copied. Perform the operation after deleting unnecessary phonebook.
cannot be stored. Perform the operation after deleting unnecessary
phonebook entries.
–
P62
P62
Appendix
MessageDescription
Registration is in progress (554)
Not registeredAn error occurred so the data cannot be registered.
Cancel and discard work in
progress?
Enter name.The name of the phonebook is not entered. Save after a name is entered.
Too much data was enteredToo many characters have been entered in the text box or URL, so
Input error (205)
Cannot operate because the user is being registered. Wait a while and try
again.
You are about to terminate without saving the content you have edited.
Select "Yes" if you are terminating without saving the content.
cannot be sent. Reduce the number of characters to send.
The data (such as text) entered and transmitted from a site are wrong.
Check the entered contents and try again.
Authentication type is not
supported(401)
InvalidAn error occurred so you could not register it.
Authentication canceled (401)This will be displayed when “Cancel” is selected from the authentication
Cannot connect because the authentication type is not supported.
screen. A 3-digit number is displayed in (401).
Reference
–
–
P58
–
–
–
–
–
Enter correct Network Security
Code
No network foundYou cannot set the network service because the network is not
No response from network. Activate
automatically?
Password is not correct.
Password is not correct. (401)
The Network Security Code is wrong. Enter the correct Network Security
Code
connected. Please wait a while and try the operation again.
Cannot search for the network automatically.To search manually, select
"Yes".
The password entered is wrong. Enter the correct password.
P96
–
P87
–
Next Page
Appendix
291
Appendix
MessageDescription
Select ON for caller ID notificationCannot notify the phone number. After setting on in caller ID notification,
try again.
File errorBecause the file has an error, cannot be saved.
Invalid FileCannot operate since the file is corrupted.
Invalid File (493)
Invalid dataBecause the file is invalid, cannot be displayed/played/saved.
File size is too bigThe file is too big to attach to mail.
Image with digital right is includedSince the file protected with copyright protection technology is included in
the folder, animation cannot be created. Select a file with no restrictions.
File is deletedThis is displayed when incoming mail with a file attached is forwarded.
Perform attachment operation in order to attach the file.
File is deletedCannot enter the file name. After entering file name, try again.
Can't attach fileThe file cannot be attached since it will exceed the size of mail that can
be sent.
Reference
P194
–
–
–
–
–
P140
P157, 158,
162
–
Cannot read file Unknown file
format
Can't create folder. Folder already
Appendix
exists.
Can't rename folder. Folder already
exists.
292
This file format is not supported in this FOMA phone.
–
The folder cannot be created since there is already a folder with the same
–
name. Change the name.
The folder cannot be created since there is already a folder with the same
–
name. Change the name.
Appendix
MessageDescription
Cannot delete folderMail is saved in the folder, so the folder cannot be deleted. Delete the
folder after deleting all the mail in the folder.
Incorrect folder nameA character invalid for a folder name is included.
Cannot create folderThe maximum number of folders is created, so cannot create any more.
Delete unnecessary folders and try the operation again.
Can't create folder any moreAn error occurred so the folder was not created.
Bookmark is full. Select item to
delete
Cannot add bookmarkAn error occurred, so could not bookmark.
No bookmarksBookmark not registered. Register bookmark beforehand.
Unknown browser errorAn unknown error occurred.
Invalid contentInvalid page, so cannot be displayed.
Total size is too bigTotal page size exceeded the maximum size, so it cannot receive
Your data will be lost. Quit?You are about to terminate without saving the edited contents such as
The maximum number of data items is already bookmarked, so cannot
bookmark any more. Delete unnecessary bookmarks by selecting “Yes”.
successfully.
phonebook entries by pressing
AorQ
. Select "Yes" to terminate
Reference
P131
–
P131,149,
156
–
P111
–
P120
–
–
–
–
without saving the contents.
Cancel editing?You are about to terminate without saving the edited contents. If you
don't want to save it, select “Yes”. To continue editing, select “No”.
Home page not set.Home is not set. Perform the operation after setting Home.
P118
Next Page
Appendix
293
Appendix
MessageDescription
Home page disableThe URL registered in Home is not entered correctly. Perform the
operation after entering it correctly.
Save failed.An error occurred, so could not be saved.
No messagesNo unsent mail messages saved.
No save areaCannot save because there is no room available in the storage area.
Delete unnecessary files.
Message too long Cannot enterCannot enter because the text size exceeded 70 full-pitch characters or
160 half-pitch characters when an SMS message was transmitted.
Message too long
Signature space is not available
Message too long End of message
will be deleted
The mail size exceeds 5,000 full-pitch characters if a signature is pasted, so
cannot be pasted. Make the text of the message short or delete attached
data to reduce the size down to 5,000 full-pitch characters or less.
The mail size exceeds 5,000 full-pitch characters if a signature is pasted, so
cannot be pasted. Make the text of the message short or delete attached
data to reduce the size down to 5,000 full-pitch characters or less.
When received mail is replied to with quote or forwarded, the message will exceed
5,000 full-pitch characters, so the last part of the message will be truncated.
Reference
P118
–
–
–
–
P145
P145
–
Cannot edit messageThe text cannot be edited because data equivalent to the size of 5,000
full-pitch characters is attached to the mail.
Manner mode Play with sound?The FOMA phone is set to manner mode. When you play the streaming
Appendix
Play with sound?The FOMA phone is set to manner mode. Select "Yes" to play sound of
Unsent message is fullCannot be saved the mail because the unsent message is full. Delete the
294
fie with a voice, select “Yes”.
moving images or a melody.
unnecessary unsent mail.
–
P138
Appendix
MessageDescription
There's empty input. Input required
Empty message cannot be savedCannot be saved because nothing is entered into address/subject/text
Invalid data. Data size is not
supported.
Invalid data. Data size is not
supported. (413)
Nuisance call barring service denied
Failed to copy mail address
Please make sure "Receive option"
in "Mail Settings" is turned ON
Message data is broken
There are items not entered. Perform the operation after entering these items.
and no file is attached to the message.
There is an error in the data received, cannot be displayed. The received
data will be destroyed. A 3-digit number is displayed in (XXX).
The Nuisance call barring service is not subscribed to so cannot be set.
In order to use this feature, please subscribe to the Nuisance call barring
service.
Failed to copy the mail address because an error occurred in the data of
the mail address during the copy operation to the phonebook.
The Receive Option setting is set to "OFF". Change the setting to "ON"
and try the operation again.
An error occurred so the mail cannot be displayed or created.
Reference
–
P139
–
P194
–
P144
–
10 files limit for message
Folder is full
The maximum number of files attachable to mail is exceeded, so no more file can
P140
be attached. The maximum of number of files that can be attached to mail is 10.
Inbox is full, so no new message can be received. Delete unnecessary
P131
received mail.
The message data is corrupted and cannot be displayed.Message data is broken
There is no MessageF saved.No messages
There is no MessageR saved.No messages
Next Page
Appendix
–
–
–
295
Appendix
MessageDescription
Memory fullBecause the memory of the FOMA phone is full, the data received by
Infrared ray transmission could not be saved. Perform the operation
after deleting unnecessary data.
Because the memory is full, the shot still images cannot be saved.
Because the memory is full, the edited still images cannot be saved.
Not enough memory Can't save
Not enough memory
Exceeds limit. Unable to paste all
letters. Paste?
Exceeds limit. Unable to paste.
Not enough memory Please delete
some files
Because there is not enough memory, each function cannot be started.
Because there is not enough memory, no still images can be taken.
Because the number of characters transmittable is exceeded, the end of
text will be truncated. Select "Yes" to send.
Because the maximum number of characters is exceeded, part of the text
could not be pasted. Select "Yes" to paste the portion that can be pasted.
Because the maximum number of characters is exceeded, the text
cannot be pasted. Perform the operation after deleting unnecessary text
by pressing
The memory is full. After deleting the unnecessary files, try again.
Q
.
Reference
P62,111,
156, 158,
162
–
–
–
–
–
–
P156, 158,
162
Appendix
296
Appendix
Introduction of Options and Related
Equipment
Combining various options with the FOMA phone, you can
realize more versatile use from personal purpose to
business purpose. Some products may not be dealt in
depending on the area. Consult a handling counter for
details. Refer to the user’s manuals of respective options
and related equipment for how to operate them.
• FOMA AC Adapter 01 • FOMA DC Adapter 01
• Rear Cover L01 • Battery Pack L01
• Flat-plug Stereo Earphone Set P01
• FOMA USB Cable
• Stereo Earphone Set P001
• Flat-plug Earphone/Microphone Set with Switch
P01/P02
• Earphone/Microphone Set with Switch P001/P002
• FOMA AC Adapter for both overseas and domestic
usage 01
1 : Earphone Jack Adapter P001 is required.
2 : When using overseas, the conversion plug adapter suited to
the destination is required.
2
1
1
Warranty and Maintenance Services
Warranty
a Make sure that you have received a warranty card
provided at purchase. After checking the contents of
the warranty card as well as “Shop name and date of
purchase”, keep the warranty card in a safe place. If
you notice that necessary items of the warranty card
are not filled in, immediately contact the shop from
where you purchased the FOMA phone. The term of
warranty is one year from the date of purchase.
a All or part of this product including the accessories may
be modified for improvement without notice.
a Data stored in the FOMA phone such as Phonebook
entries may be modified or lost owing to malfunction,
repairs, or other mishandling of the FOMA phone. You
are advised to take a note of the Phonebook entries for
just in case. If you have a personal computer Windows
XP, Windows 2000, Windows Me, Windows 98SE, you
can transfer and save the data stored in the
Phonebook to your computer using the dedicated data
link software and a FOMA USB Cable (Option). Also,
when the FOMA phone is under repairs, the files you
downloaded using i-mode and i-appli cannot be
transferred to the new FOMA phone, except for some
files, based on the Copyright Law.
Appendix
297
Appendix
Maintenance Services
When there is a problem with the FOMA phone
Before asking repairs, check “Troubleshooting” in this
manual. If the problem remains unsolved, contact
“Repairs” listed on the back page of this manual for
consultation.
When repairs are necessitated as a result of
consultation
Bring your FOMA phone to the repair counter specified by
DoCoMo. Note that your phone is accepted for repair
during the repair counter’s business hours. Also, make
sure that you will bring the warranty card with you to the
counter.
• In warranty period
– Your FOMA phone is repaired charge free in
accordance with the terms of warranty.
– Make sure that you bring the warranty card to the
counter for the repair. If you do not show the
warranty card, or when troubles or damages are
Appendix
regarded to be caused by your mishandling, the
repair cost is charged even within the warranty
period.
– The cost for troubles caused by the use of devices
and consumables other than those specified by
DoCoMo is charged even within the warranty period.
• Repairs may not be performed in the following cases:
Repair may not be feasible when wet-detecting sticker is
colored; when corrosion due to soaking, dew
condensation, or perspiration was found by the test;
when the internal parts are damaged or deformed. Even
if repair is feasible, repair due to the reasons above is
not covered by the warranty, so the repair cost is
charged.
• After the warranty period
We will repair your phone on request (charges will apply).
• Spare parts availability period
The minimum storage period of the performance parts (parts
required for maintaining performance) for repairing the
FOMA phone is four years after production comes to an
end. The FOMA phone can be repaired during this period.
Even after the storage period, the FOMA phone may be
repaired depending on the troubled portions. Contact
“Repairs” listed on the back of this manual.
Other points to note
• Make sure not to modify the FOMA phone or its
accessories.
– Catching fire, giving injury, or causing damages may
result.
–
To avoid radio wave interference or Network troubles, a
technical standard for the FOMA phone and the UIM is
specified by the law; you cannot use the FOMA phone and
the UIM that do not satisfy the technical standard.
298
Appendix
– If you make modifications (parts replacement,
modification, paints), we can repair the FOMA phone
only when you restore the modified portions to their
previous status before the modifications (to the
DoCoMo genuine product). We may refuse repairing
depending on the modifications.
– Repairs of troubles or damages resulting from the
modifications are charged even within the warranty
period.
• Do not peel the name plate off from the FOMA phone.
The name plate is a certificate for ensuring the technical
standard. If the name plate is intentionally removed or
replaced, the contents described in the name plate
cannot be checked, as we cannot verify the conformity
of the product to the technical standard. Note that we
may refuse repair for some malfunctions in this case.
• Information such as settings of each function and total
call time might be cleared (reset) depending on the
trouble/repair or other handlings of the FOMA phone. In
that case, make settings again.
• Parts generating magnetic field are used in the following
places. Note that if you put a card such as cash card
liable to be influenced by magnetic field close to them;
the card might be adversely affected. <Specifications
being confirmed>Places used: Earpiece (speaker)
• If the FOMA phone gets wet or humid, immediately turn
the power off and remove the battery pack; then visit the
repair counter. The phone may not be repaired
depending on its condition.
Memory dial (Phonebook function) and
downloaded information
a It is recommended to take a note of the information you
have stored in the FOMA phone. We are not
responsible for any change or loss of the information.
a When replacing or repairing your mobile phone, the
data you created, obtained from external devices, or
downloaded may be changed or lost. We at DoCoMo
do not take any responsibility for the loss or change
incurred to the data. We may replace your mobile
phone with a new one instead of repairing, for our
convenience sake, but we cannot export data to your
new mobile phone except for some data. From this
FOMA phone, we can move the images and ring
melodies downloaded from the authorized i-mode sites
to your new mobile phone at repairs. (There are some
contents that cannot be moved. Also, we may not be
able to move data depending on the degree of trouble.)
Appendix
299
Appendix
Specific Absorption Rate of the Mobile
Phone
Specific Absorption Rat (SAR) Certification
Information
This FOMA L601i model phone conforms to the technical
standard defined by the country for exposure to radio
waves on human body. The technical regulation
established permitted levels of radio frequency energy,
based on standards that were developed by independent
scientific organizations through periodic and thorough
evaluation of scientific studies. The regulation employs a
unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit is 2 watts/kilogram (W/kg)
averaged over ten grams of tissue. The limit includes a
substantial safety margin designed to assure the safety of
all persons, regardless of age and health. The value of the
limit is equal to the international guidelines recommended
by International Commission on Non-ionizing Radiation
Protection (ICNIRP).
All phone models should be confirmed to comply with the
regulation, before they are available for sale to the public.
Appendix
The highest SAR value for this FOMA L601i phone is
0.426W/kg. It was taken by the Telecom Engineering
Center (TELEC), a Registered Certification Agency on the
Radio Law. The test for SAR was conducted in
accordance with the procedure defined by the country,
using standard operating positions with the phone
transmitting at its highest permitted power level in all
tested frequency bands. While there may be differences
between the SAR levels of various phones and at various
positions, they all meet the technical regulation. Although
the SAR is determined at the highest certified power level,
the actual SAR of the phone during operation can be well
below the maximum the maximum value. For further
information about SAR, please see the following websites:
Ministry of Internal Affairs and Communications
http://www.tele.soumu.go.jp/j/ele/index.htm
Association of Radio Industries and Businesses
http://www.arib-emf.org/index.html
DoCoMo
http://www.nttdocomo.co.jp/product/
LG Electronics Japan
http://www.jp.lge.com/index.do
: The technical regulation is provided in Article 14-2 of
the Ministry Ordinance Regulating Radio Equipment.
Export/Re-export regulations of Japan
and USA
The export and re-export regulations of Japan and United
States apply to this product and its accessories. Exports
(and re-exports) contrary to those laws and regulations,
including but not limited to exports and re-exports to
sanctioned countries and to restricted end uses or end
users is prohibited. A user must apply for approvals or
300
Appendix
permissions for export (or re-export) to the restricted
countries at the user's expense and responsibility in
accordance with such regulations. For further information,
contact Japanese Ministry of Economy, Trade, and
Industry or the U.S. Department of Commerce.
Radio Frequency (RF) Signals
THIS MODEL PHONE MEETS THE U.S. GOVERNMENT'S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone contains a radio transmitter and
receiver. Your phone is designed and manufactured not to
exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications
Commission of the U.S. Government. These limits are part
of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR limit set by the FCC is
1.6W/kg.
operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum
value. This is because the phone is designed to operate at
Tests for SAR are conducted using standard
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the output.
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that it does not
exceed the limit established by the U.S. governmentadopted requirement for safe exposure. The tests are
performed on position and locations (for example, at the
ear and worn on the body) as required by FCC for each
model. The highest SAR value for this model phone as
reported to the FCC when tested for use at the ear is
0.708W/kg, and when worn on the body, is 0.249W/kg.
(Body-worn measurements differ among phone models,
depending upon available accessories and FCC
requirements). While there may be differences between
the SAR levels of various phones and at various positions,
they all meet the U.S. government requirement.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section at
http://www.fcc.gov/oet/fccid after search on FCC ID
BEJL601i.
For body worn operation, this phone has been tested and
meets the FCC RF exposure guidelines when used with an
accessory designated for this product or when used with
an accessory that contains no metal and that positions the
handset a minimum of 1.5 cm from the body.
Appendix
Next page
301
Appendix
In the United States, the SAR limit for wireless mobile
phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. SAR values may
vary depending upon national reporting requirements
and the network band.
Declaration of Conformity
The product “FOMA L601i” is declared to conform with
the essential requirements of European Union Directive
1999/5/EC Radio and Telecommunications Terminal
Equipment Directive 3.1(a), 3.1(b) and 3.2.
This mobile phone complies with the EU requirements for
exposure to radio waves.
Your mobile phone is a radio transceiver, designed and
manufactured not to exceed the SAR
exposure to radio-frequency (RF) energy, which SAR
value, when tested for compliance against the standard
was 1.0W/kg. While there may be differences between
the SAR
positions, they all meet
exposure.
Appendix
levels of various phones and at various
the EU requirements for RF
The exposure standard for mobile phones
employs a unit of measurement known as the
Specific Absorption Rate, or SAR.
The SAR limit for mobile phones used by the
public is 2.0 watts/kilogram (W/kg) averaged over
ten grams of tissue, recommended by The
Council of the European Union. The limit
limitsfor
incorporates a substantial margin of safety to give
additional protection for the public and to account
for any variations in measurements.
Tests for SAR have been conducted using
standard operating positions with the phone
transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is
determined at the highest certified power level,
the actual SAR level of the phone while operating
can be well below the maximum value. This is
because the phone is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the
closer you are to a base station antenna, the
lower the power output.
Important Safety Information
AIRCRAFT
Switch off your wireless device when boarding an aircraft
or whenever you are instructed to do so by airline staff. If
your device offers a 'flight mode' or similar feature consult
airline staff as to whether it can be used on board.
DRIVING
Full attention should be given to driving at all times and
local laws and regulations restricting the use of wireless
devices while driving must be observed.
302
Appendix
HOSPITALS
Mobile phones should be switched off wherever you are
requested to do so in hospitals, clinics or health care
facilities. These requests are designed to prevent possible
interference with sensitive medical equipment.
PETROL STATIONS
Obey all posted signs with respect to the use of wireless
devices or other radio equipment in locations with
flammable material and chemicals. Switch off your
wireless device whenever you are instructed to do so by
authorized staff.
INTERFERENCE
Care must be taken when using the phone in close
proximity to personal medical devices, such as
pacemakers and hearing aids.
Pacemakers
Pacemaker manufacturers recommend that a minimum
separation of 15cm be maintained between a mobile
phone and a pacemaker to avoid potential interference
with the pacemaker. To achieve this use the phone on the
opposite ear to your pacemaker and do not carry it in a
breast pocket.
For other Medical Devices:
Please consult your physician and the device
manufacturer to determine if operation of your phone may
interfere with the operation of your medical device.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
want to consult your hearing aid manufacturer to discuss
alternatives.
Appendix
303
Index .................................................... 306
• Refer to “i-mode User’s Manual” for the settings in i-mode center such as mail address setting, mail received /
rejected setting, mail size setting, deactivating/resuming mail function.
• As for Data Link, see “Manual for Data communication” (Manual for Data communication.pdf).
The Quick Manual describes the basics of displays, operations, and such like, of the FOMA phone and can be
detached from this manual to carry with you. You can fold the Quick Manual as illustrated below, and carry it with
you for convenience.
1. Detach it from this manual
2. Fold it in half horizontally
3. Fold it in half vertically
Cover
Index/Quick Manual
Cover
315
FOMA L601i
Phonebook
If you have any questions about this user’s manual, please
contact the number below.
a
For any problem, please contact the number below.
a
Cutoff line
• Make sure that you dial the correct number.
Quick Manual
General Inquiries <DoCoMo Information Center>
a
From DoCoMo mobile phones and PHSs
(No prefix)
✻ Cannot be called from ordinary phone
From DoCoMo mobile phones and PHSs
(No prefix)
✻ Cannot be called from ordinary phone
151
(In Japanese, toll-free)
113
(In Japanese, toll-free)
Repairs
a Selecting a Storage Location
Select/(Storage) field ] Select
Handset/UIM
a Entering a Name/Reading
Select(Name) field ] Enter a name ] C
Select (Reading) field ] Enter a reading ] C
• Automatically inserted if a name is entered.
a Entering a Phone Number/Mail Address
Select(Number) ] Enter a phone number ] C
Select(Mail addr) ] Enter a mail address ] C
a Selecting a Group
Select(No group) field ] Select a group
a Setting an Image*
Select(Image) field ] Select a setup method
From ordinary phones
0120-800-000
✻ Can be called from DoCoMo mobile
phones and PHSs.
a
From ordinary phones
0120-800-000
✻ Can be called from DoCoMo mobile
phones and PHSs
Adding to Phonebook
1. On the Stand-by display, C [Menu] ]
]“Add to phonebook
Add phonebook
Handset
Name
Reading
Number1
Mail addr1
No group
<Add to Phonebook>
”
2. Select the following setting items
1
a Setting a Phone Ring Tone/Mail Ring Tone*
Select(Ringtone) field ] Select a setup method
Select (Mail ringtone) field ] Select a setup
method
a Entering a URL*
Select(URL) field ] Enter a URL ] C
a Entering a Home Address/Company Address*
Select(Postal code) field ] Enter a postal
code ] C
Select(Home addr) filed ] Enter a home
address ] C
Select(Company name) field ] Enter a
company name ] C
Select(Job title) field ] Enter a job title ] C
Select (Company addr) field ] Enter a
“Phonebook”
2
3
company address C
Select(Memo) filed ] Enter a text memo ] C
: Not displayed if the storage location for the
phonebook is set to “UIM”.
3. After setting, I[Save]
Storing from Call Records Such as Received
Call Records
1. On the Stand-by display, L/R/A/T
2. Select a call record to store ] M[Menu] ] “Add to
phonebook”
3. Set each item ] After setting, I[Save]
Searching Phonebook
1. On the Stand-by display, C[Menu] ] “Phonebook” ]
“Search phonebook” ] Select a search method ] C
Modifying Phonebook
1. On the Stand-by display, U
2. Select a phonebook to modify ] M[Menu] ] “Edit”
• In case of changing the phonebook to display (Phone,
FOMA card) M [Menu] > “Display switch” > “Display
data” > “Only Handset”/“Only FOMA card”.
3. Modify each item ] After modifying I[Save]
Deleting Phonebook
1. On the Stand-by display, U
2. M[Menu] ] “Delete”
• Delete: You can delete the selected phonebook.
• Delete selected: You can select and delete multiple
phonebooks.
• Delete all: You can delete all the phonebooks.
4
Entering Characters
Character Entry Display
Message
Full
Menu Set Mode
<Character Entry>
1 Number of characters that can be entered: Displays
the number of characters that can be entered in bytes.
2 Operation guide area: Displays an operation you can
perform by
ʃʢab12
1
2
3
A
6
5
3 Entry mode area: Display the entry mode.
(The cursor is placed on the current mode.)
a To change the input mode,
Press I several times.
a To change Full/ Half pitch
A
a To switch from pictograph/ symbol/ face mode to
text input mode,
T several times.
a To input full/ half pitch or change capital/ small mode,
Press * after inputting the character.
a To input a punctuation,
Press * several times.
a To input a character after feeding the line
Press #/D
7
Cutoff line
a To input a space,
a To delete a character
• A few cases may be not to operate properly by input
Cutoff line
Press M [Menu] ] Special input ] Space
Move the cursor the position to delete a character.
mode.
Entering Characters
• You can use Hiragana mode ().
1. On the Character Entry display, enter characters
• M[KanaA1]: Displays Katakana, alphabet and numeral
candidates.
• I[Conv]: Displays conversion candidates
• C: You can finalize the entry without converting it.
2. Move the cursor to the prediction candidate area
using D.
3. Select a character to convert ] C
Copying/Cutting/Pasting
1. On the Character Entry display, M[Menu] ] “Edit
character” ] “Copy”/”Cut”
2. Move the cursor to the start position ] C
8
3. Move the cursor to the end position ] C
4. Move the cursor to the display/position to paste to
5. M[Menu] ] “Edit character” ] “Paste”
Camera Functions
Taking Still Images
1. On the Stand-by display, G
2. After confirming the subject, C
3. C
Taking Continuous Shot
1. On the Standby display, G
2. M[Menu] ](Multishot)
3. Select the number of continuous shots ] I[Close]
4. After confirming the subject, C
10
9
Shooting Moving Images
1. On the Stand-by display, C[Menu] ] “Multimedia” ]
“Movie mode”
2. After confirming the subject, C
3. C
Playing Back Images, Moving Images
and Melodies
Displaying Images
1. On the Stand-by display, C[Menu] ] “Data box” ]
“My picture”
2. Select a folder ] C ] Select a file ] C
11
Playing Back Moving Images
1. On the Stand-by display,
“i-motion”
2. Select a folder ] C ] Select a file ] C
• Operations you can perform during moving image
playback
– C, G: Plays back/Pauses
– I: Stops
–J: Plays back the previous file/next file
–J(press and hold): Fast forwards/rewinds the image
while it is pressed
–H,FE: Adjusts the volume
C[Menu]]“Data box”
]
Playing Back Melodies
1. On the Stand-by display, C[Menu] ] “Data box” ]
“Melody”
2. Select a folder ] C ] Select a file ] C
• Operations you can perform during melody playback
– C, G: Playback/Pause
–J: Plays back the previous file / next file
–J(press and hold): Fast forwards/rewinds the
melody while it is pressed
–H,
: Adjusts the volume
FE
12
Making/Receiving Video-phone Calls
Making Video-phone Calls
1. Enter a phone number ] T ] Start talking when the
other party answers the call
• C[Substitute]: Switches the image to be sent to the
other party to the substitute image
•
: Adjusts the earpiece volume
FE
2. After talking,
Answering Video-phone Calls
1. When you receive a call, press
•
A/C
substitute image to be sent to the other party
2. After talking,
P
T
: Answers the video-phone call with the
P
14
13
Switching to Speaker Phone
1. Press and hold Q for two seconds during a call
15
Cutoff line
Displaying the Compose Message Screen
1. On the Standby-display,
<Compose Message>
Cutoff line
i-mode Mail
Composing/Sending i-mode Mail
[Mail]]“Compose Mail”
M
“Compose message”
Compose message
0Kbyte
Menu Select Send
0Kbyte
]
Entering an Address
1. Select (To) box ] C ] Enter an address ] C
Entering a Subject
1. Select (Sub) box ] C ] Enter a subject ] C
Entering Text
1. Select (Text) box ] C ] Enter the text ] C
Sending Mail
1. I[Send]
16
Attaching Files
Attaching Images
1. On the Compose Message display, select (Attached
file) box
folder
Attaching Melodies
1. On the Compose Message display, select (Attached
file) box
folder
] C ]
] C ]
] C ]
] C ]
“Attach File]“My picture”]Select a
Select an image
] C
“Attach File”]“Melody”]Select a
Select a file
] C
18
17
Attaching Moving Images
1. On the Compose Message display, select
(Attached file) box ] C ] “Attach File ] “i-motion” ]
Select a folder ] C ] Select moving images ] C
Receiving i-mode Mail
1. Mail comes in ] The Reception Result display appears
• To check the received i-mode mail/SMS right away,
select “Mail” and then press C.
Other Mail Functions
Replying to Mail
1.On the display of the mail to reply to, M[Menu] ]
“Reply” ] Enter text ] C ] I[Send]
19
Forwarding Mail
1. On the display of the mail to forward, M[Menu] ]
“Forward” ] Enter an address ] C ] I[Send]
Menu List
Menu Item
Checking New Messages
1. On the Stand-by display, press M[Mail] for at least
two seconds time ] “Check new message”
20
Menu Item
1 Input address
2 URL history
i-appli
i-mode
1 iMenu
2 Bookmark
3 Screen memo
4 Last URL
5 Go to location
NW Service
1 Voice mail
21
Menu Item
Cutoff line
6 Message
1 MessageR
2 MessageF
7 Check new message
8 i-mode setting
1 Home
2 View
3 Certificates
4 Others
22
1 Activate voice mail
2 Set ringing time
3 Deactivate voice mail
4 Voice mail status request
5 Play messages
6 Voice mail setting
7 Check messages
8 Notify missed call
9 Delete voice mail icon
23
Menu Item
Menu Item
Cutoff line
0
Set message alert ringer
2 Call waiting
1 Activate call waiting
2 Deactivate call waiting
3 Call waiting status request
3 Call forwarding
1 Activate call forwarding
2 Deactivate call forwarding
3 Register the forwarding number
4 Setting at forwarded party busy
5 Call forwarding status request
24
Menu Item
7 Set arrival act
4 Nuisance call barring
1 Register nuisance caller
2 Delete all entries
3 Delete most recent entry
5 Caller ID notification
1 Activate/Deactivate caller ID notification
2 Caller ID notification status request
6 Caller ID request
1 Activate caller ID request
2 Deactivate caller ID request
3 Caller ID request status request
25
Menu Item
Mail
1 Activate arrival act
2 Deactivate arrival act
3 Arrival act status request
8 Arrival call act
9 Others
1 Additional service
2 Additional guidance
3 English guidance
4 Service dialing number
5 Call barring
26
1 Inbox
2 Outbox
3 Unsent message
4 Compose mail
1 Compose message
2 Compose SMS
5 Check new message
6 Receive option
7 Check new SMS
8 Mail setting
27
Menu Item
Menu Item
1 Communication
2 Edit
3 View
4 Others
Data box
1 My picture
2 i-motion
3 Melody
4 miniSD memory card
Multimedia
1 Camera-mode
Menu Item
3 Reading search
28
2 Movie-mode
Stationery
1 Scheduler
2 Memo
3 Date search
4 Date counter
Phonebook
1 Add to phonebook
2 Search phonebook
1 Show all data
2 Group search
Menu Item
6 Own number
29
Cutoff line
4 Memory No. search
5 Phone No. search
6 Domain search
3 No. of phonebook
4 Phonebook settings
1 Display data
2 Create domain list
3 Search by
4 Display image
5 Group settings
30
Tools
1 Alarm
2 Custom menu
3 IrDA
4 Calculator
5 Unit converter
1 Currency
2 Surface
3 Length
4 Weight
31
Menu ItemMenu Item
Cutoff line
5 Temperature
6 Volume
7 Velocity
6 World time
7 Stop watch
8 miniSD memory card
1 Data box
2 Memory info.
3 Reset miniSD card
Sound
1 Ring volume
Menu Item
1 Stand-by display
32
2 Effect tone volume
3 Select ringtone
4 Select effect tone
5 Vibration settings
6 Manner settings
1 Manner mode
2 Original manner
7 Mail ring duration
8 Set mute seconds
Display
1 Main display
33
Menu Item
Settings
2 Incoming call
3 Outgoing call
2 Sub display
1 Stand-by display
2 Incoming call
3 Outgoing call
3 Font
4 Menu style
5 Backlight
6 Color scheme
34
1 Call/Answer
1 Call history
2 Call duration
3 Auto answer
4 Reject/Accept call
5 Memory reject call
6 Answer mode
2 Call feature
1 Reconnect alarm
2 Quality alarm
35
Menu Item
Menu Item
3 Minute reminder
4 Prefix dial
5 International dial
6 Close setting
3 Video-phone
1 Video-phone settings
2 Image settings
4 Date & Time
1 Set time
2 Set date
3 Daylight saving
9 Others
1 Memory status
2 Reset settings
3 SMS center
4 Reset holiday
36
Menu Item
5 Network
1 Network selection
2 Network mode
3 Preferred lists
4 Network name display
6 Host selection
7 Security
1 All lock
2 PIN code request
3 Change password
8
37
Network Service
Cutoff line
Voice Mail Service
Activating Voice Mail Service
1. On the Stand-by display, C[Menu] ] “NW service” ]
“Voice mail” ] “Activate voice mail”
Deactivating Voice Mail Service
1. On the Stand-by display, C[Menu] ] “NW service” ]
“Voice mail” ] “Deactivate voice mail”
38
Playing Messages
1. On the Stand-by display, C[Menu] ] “NW service” ]
“Voice mail” ] “Play messages”
39
Call Waiting Service
Call Forwarding Service
Activating Call Waiting Service
1. On the Stand-by display, C[Menu] ] “NW service”
Deactivating Call Waiting Service
1. On the Stand-by display, C[Menu] ] “NW
Cutoff line
Deactivating Call Waiting Service
1. On the Stand-by display, C[Menu] ] “NW service” ]
] “Call waiting” ] “Activate call waiting”
service”
] “Call waiting” ] “Deactivate call
waiting”
40
“Caller ID notification” ] “Activate/Deactivate caller
ID notification” ] “Not notify”
Activating Call Forwarding Service
1. On the Stand-by display, C[Menu] ] “NW service” ]
“Call forwarding” ] “Activate call forwarding”
Deactivating Call Forwarding Service
1. On the Stand-by display, C[Menu] ] “NW service” ]
“Call forwarding” ] “Deactivate call forwarding”
Caller ID Notification Service
Activating Caller ID Notification Service
1. On the Stand-by display, C[Menu] ] “NW service” ]
“Caller ID notification” ] “Activate/Deactivate caller
ID notification” ] “Notify”
41
Services Available From the FOMA Phone
Service
Collect call (Calls charged to the receiver) (No prefix) 106
Directory assistance for ordinary phones
and DoCoMo mobile phones (Charges
apply) (Unlisted phone numbers cannot
be given.)
Telegrams (Telegram charges apply)
Time check (Charges apply)
8 a.m. to 10 p.m.
Phone Number
(No prefix) 104
(No prefix) 115
(No prefix) 117
42
Weather forecast (Charges apply)
Emergency calls to police
Emergency calls to fire station and ambulance
Emergency calls for accidents at sea
Disaster messaging service (Charges apply)
43
Area Code + 177
(No prefix) 110
(No prefix) 119
(No prefix) 118
(No prefix)171
Main Display
1 23456789!" #
Main Icons
: Displayed during a voice call using the speaker phone
3: Blinks while i-mode is activated
: Blinks during i-mode transmission
: Displayed during trying dialup connection
: Displayed during dialup connection
: Displayed while an SSL-enabled page is displayed or obtained
4: Displayed while Voice Mail is activated
: Displayed while Voice Mail is deactivated
: Displayed while Call Forwarding is activated
: Displayed while “All Call Rejection” is activated
$%&()
1~: Shows the level of the received radio waves
: Out of service area
2: Displayed during a voice call
: Displayed during a video-phone call
44
(White): Displayed when the i-mode Center holds a MessageR
(Request)
(Pink): Displayed when the box for MessagesR (Request) at
the i-mode Center is full.
(White): Displayed when the i-mode center holds a MessageF
(Free)
(Pink): Displayed when the box for MessagesF (Free) at the imode Center is full.
(White): Displayed when the i-mode Center holds mail, a
MessageR (Request) and a MessageF (Free)
(Pink): Displayed when the boxes for i-mode mail, MessagesR
(Request) and MessagesF (Free) at the i-mode Center are full
7(White): Displayed when unread mail exists.
(White): Displayed when an unread SMS message exists.
(White): Displayed when unread mail and SMS message exist.
(Pink): Displayed when the inbox is full.
5: Displayed while a function (Task) is activated
6(White): Displayed when the i-mode Center holds mail
(Pink): Displayed when the box for i-mode mail at the i-mode
Center is full
45
: Displayed when the area for SMS messages in the UIM
(FOMA card) is full.
8(White): Displayed when a Voice Mail message exists.
(Pink): Displayed when the box for Voice Mail messages is full.
9(White): Displayed when an unread MessageR (Request) exists.
(Pink): Displayed when the box for MessagesR (Request) is full.
!: Displayed when an unread MessagesF (Free) exists.
(Pink): Displayed when the box for MessagesF (Free) is full.
": Displayed when i-appli is being started
: Displayed when i-appli auto start failed
#~: Shows the battery level.
$(Pink): Displayed during Manner Mode.
(Blue): Displayed during Original Manner Mode.
%: Displayed when the ringtone for incoming voice call or video-
phone call sounds, not activating a vibration.
Cutoff line
46
47
: Displayed when a vibration is activated.
: Displayed when a vibration and a ringtone sounds at the
same time.
: Displayed when a vibration and a ringtone do not activate.
&: Displayed while an alarm is set
: Displayed when today’s schedule exists
: Displayed when an alarm is set and today’s schedule exists
(: Displayed while a miniSD memory card is inserted
):Displayed when an error occurs on the UIM (FOAM card)
Sub-screen
123456
Cutoff line
3: Displayed while “All Call Rejection” is activated
4(White):Displayed when the i-mode Center holds mail / an
5: Displayed when an alarm is set.
48
: Displayed during trying dialup connection
: Displayed during dialup connection
unread mail exists.
(Pink): Displayed when the box for mail at the i-mode
Center / in UIM (FOMA card) / Inbox is full
: Displayed when today’s schedule exists.
: Displayed when an alarm is set and today’s schedule
exists.
1
~
: Shows the level of the received radio waves
:
Out of service area
2: Displayed during a voice call
: Displayed during a video-phone call
: Displayed while using the speaker phone
49
If you have any questions about this user’s manual,
please contact the number below.
General Inquiries <DoCoMo Information Center>
a
a
From DoCoMo mobile phones and PHSs
(No prefix)
✻ Cannot be called from ordinary phone
151
(In Japanese, toll-free)
From ordinary phones
0120-800-000
✻ Can be called from DoCoMo mobile
phones and PHSs.
For any problems, please contact the number below
Repairs
a
a
From DoCoMo mobile phones and PHSs
(No prefix)
✻ Cannot be called from ordinary phone
113
(In Japanese, toll-free)
From ordinary phones
0120-800-000
✻ Can be called from DoCoMo mobile
phones and PHSs
6~: Show the battery level.
50
• Make sure that you dial the correct number.
51
If the Handset is Lost, Stolen or Payment for Total Dialing Charges
<DoCoMo Information Center> (24-hour service)
ZUniversal number
International Call ID Number
for the Universal Number (See Table 1)
ZIf the universal number is not available;
Major international
access codes (See Table 2)
Cutoff line
FOMA L601i
Quick Manual (for Overseas Use)
-800-0120-0151
✻ Local dialing charges may apply for the country or region that you are in.
-81-3-5366-3114*
✻ Dialing charges for calls to Japan will apply.
✻ When you are calling from L600i, you can dial +81-3-5366-3114.
(Press and hold the “0” key for at least one second for “+”.)
✻ See Page 11 and 13 of the Quick Manual for the International Call ID Number
for the Universal Number (See Table 1) / International access code (See Table 2).
✻ The Numbers in Table 1 and Table 2 may change.
If the Handset is not Working Properly
<Network Technical Support and Operation Center> (24-hour service)
ZUniversal number
International Call ID Number
for the Universal Number (See Table 1)
✻ Local dialing charges may apply for the country or region that you are in.
ZIf the Universal Number is not available;
International access
codes (See Table 2)
✻ Dialing charges for calls to Japan will apply.
✻ If you are calling from L600i, you can dial +81-3-6718-1414.
(Press and hold the “0” key for at least one second for “+”.)
✻ See Page 12 and 14 of the Quick Manual for the International Call ID Number
for the Universal Number (See Table 1) / International access code (See Table 2).
✻ The Numbers in Table 1 and Table 2 may change.
-81-3-6718-1414*
-800-5931-8600
Overseas Network and Available Services
Network
3G
GPRS
GSM
Icon
Voice
O
O
O
• Services marked with “O” may not be available depending
on the communication carrier or the region.
• See the DoCoMo web page for the service available in
each country or local area.
http://www.nttdocomo.co.jp/service/world/
Packet
transmission (i-
mode/mopera
U, etc.)
O
O
X
12
SMS
O
O
O
Video-
phone
O
X
X
Setting Network
During international roaming, available networks are
automatically searched to complete the settings. See P5 for
other settings such as manual search for the network.
Making Calls
If the other party uses the carriers support the FOMA videophone, you can make a video-phone call by pressing T
instead of A.
Making a Call from Abroad to Japan
• Make sure that “Auto assist setting” is set to “OFF”.
• You can also call WORLD WING/WORLD WALKER
subscribers abroad by this operation.
1. On the Stand-by display, press and hold 0 for at
least one second to display “+”.
2. Enter “81” for the Country Code of Japan.
3. Enter the other party’s area code except for “0” and
phone number ] A(T)
4. After talking, P
1. On the Stand-by display, press and hold 0 for at
least one second to display “+”
2. Enter other party’s country code (P11)
3. Enter the other party’s area code except for “0” and
phone number ] A(T)
4. After talking, P
Calling the Third Party in the Country You Are in
1. Enter the other party’s area code and phone number
] A(T)
2. After talking, P
Making Calls from the Country You Are In to
Other Countries
• Make sure that “Auto assist Settings” is set to “OFF”. > P5
3
Receiving Calls from Countries Other Than Japan
1. Enter the International access code of the originating
country (P14)
2. Enter “81” for the country code of Japan
3. Enter your mobile phone number except for the first
“0” ] A
Changing Settings to Make Calls Easily
Auto Assist Setting
You can change the settings to make a call by automatically
converting “+” to the IDD prefix code set in “IDD prefix setting”.
1. Enter your mobile phone number just like calling in
Japan ] A
4
• Auto: Converts “+” to the number set in “IDD prefix
number” when dialing
• OFF: Does not convert “+”
Setting International Call Settings
You can set the international access number added to the
beginning of the phone number for making an international
call. “009130010” (WORLD CALL) is set by default.
1. On the Stand-by display, C[Menu] ] “Settings”
2.
“Call feature” ] “International dial” ] “IDD prefix setting”
] enter “IDD prefix name” and “IDD prefix code”
• IDD prefix name: Enter the name of an international call
• IDD prefix code: Enter an international access code
Cutoff line
5
6
You can change the settings to manually search for the
network you use.
1. On the Stand-by display, C [Menu] ] “Settings”
2. “Network” ] “Network selection”
3. “Manual”
Set types of network to be searched (3G/GSM).
1. On the Stand-by display, C [Menu] ] “Settings”
Cutoff line
Change Settings to Select a Network
Manually
• To change the setting back to automatic search, select
“Auto”.
1. On the Stand-by display, C[Menu] ] “NW service”
2. “Others” ] “Call barring” ] “Activate barring of
incoming call – roam” ] “Barring all incoming calls” /
“Data calls barring” ] enter your terminal security
code ] C
• Barring all incoming calls: Bars all incoming calls
• Data calls barring: Bars incoming video-phone calls only
10
Major Country Codes
International Call ID Numbers for the
Region
Australia
Canada
Greece
Indonesia
Italy
Go to the WORLD WING web page for other country
codes and details.
Region
Philippines
Singapore
Spain
Sweden
Germany
Hong Kong001UK00
Ireland00USA011
Number
61
1
30
62
39
Number
00
001
00
00
00
Region
South Korea
Singapore
Switzerland
UK
USA
11
Region
Israel
Italy
Switzerland
Taiwan
Thailand
Number
82
65
41
44
1
Number
0014
00
00
00
001
Universal Number (Table1)
The Universal Number may not be available in some
areas.
Region
Argentina
Australia
Austria
Belgium00Malaysia00
Brazil
Canada
China
Number
00
00
900
90
00
0021Netherlands00
011New Zealand00
00Norway00
Region
Columbia
Demark
France
South Korea
Luxembourg
12
009
00
00
001
000
Number
International Access Codes by Country
(Table 2)
The international access code may not be available in
some areas.
RegionNumberRegionNumber
Australia
Belgium
Brazil
0011
00
0014
Finland
Macao
00
990
00
Cutoff line
Go to the WORLD WING web page for other country
codes and details.
13
Canada
China
Czech
Demark
0021
0023Monaco00
011
00
00
00
Malaysia
Netherlands
New Zealand
Norway
Philippines
14
00
00
00
00
00
RegionNumberRegionNumber
Poland
00
South Korea
001
Go to the WORLD WING web page for other country
codes and details.
Portugal
Russia
Singapore
France00Switzerland00
Germany
Greece
Hong Kong
Hungary
India00
Indonesia001USA011
Ireland00Vietnam00
Cutoff line
Italy00
00
810
001
00
00
001
00
Luxembourg
Spain
Sweden
Taiwan
Thailand
Turkey
UK
United Arab Emirates
15
00
00
00
002
001
00
00
00
You can change the address or payment plan, various procedures or requirements through DoCoMo e-site
(ʡʋʺeʍɼʠ).
From i-mode
ȅMenu Ƌ ᆧࣸŕȤడ Ƌ ʡʋʺeʍɼʠ
No packet transmission charge
From personal computer
* When applying from i-mode, you need to have your “Network Security Code”.
* When applying from i-mode, the packet transmission fee is free. You are charged fee, however, when you access e-site from abroad.
* When applying from your computer, you need to have your “My DoCoMo ID-Password”.
* If you do not have or do not remember your “Network Security Code” and “My DoCoMo ID/Password”, contact DoCoMo
Information Center for inquiries.
* This service may not be available depending on the contents of the contract.
* During system maintenance, you may not be able to access some services.
My DoCoMo
https://www.mydocomo.com/Ƌ ߂ହറȧĪʡʋʺeʍɼʠī
Don’t forget your FOMA phone…or your manners!
When using your FOMA phone, do not forget to show common courtesy and consideration to the people around you.
In the following cases, be certain to turn the power off.
a Where use is prohibited
Some places prohibit the use of mobile phones. Be sure to turn off the power to your FOMA phone in any of the following places:
•
In airplanes • In hospital
✻ Electronic medical equipment is used in places other than the actual wards. Make sure you have the power switched off even if you are in a
lobby or waiting room.
a While driving
Using the FOMA phone while driving interferes with safe driving and could cause danger.
✻ Park the car in a safe place before using the FOMA phone, or switch to Driving mode.
a When in crowded places such as packed trains, where you could be near a person with an implanted cardiac pacemaker or implanted
defibrillator operation can be affected by radio emissions from the FOMA phone.
a When in theaters, movie theaters, museums, and similar venues
If you use your FOMA phone where you are supposed to be quiet, you will disturb those around you.
Adjust the volume of your voice and ring tone according to where you are.
a If you use the FOMA phone in quiet places such as restaurants and hotel lobbies, keep the volume of your voice and the ring tone down.
a Do not block thoroughfares when using the FOMA phone.
Respect privacy.
Please respect the privacy of individuals around you when taking and sending photos using camera-equipped mobile phones.
These functions help you keep your manners in public.
Handy functions are available such as for setting the response to incoming calls and setting all the tones to silent.
• Manner Mode
In Manner Mode or Super Silent, the keypad sound, ring tone and all other sounds generated by the FOMA phone are silenced. > P70
• Vibrator
When the vibrator is set, it vibrates for incoming calls. > P70
• Voice Mail, Call Forwarding Service, etc.
Callers can record a message or calls can be forwarded using optional services when you cannot come to the phone. >P190, P193
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.