LG Electronics USA IPS226TX User Manual

On Screen Display(OSD) Selection and Adjustment

Main menu

PRESET Mode

USER Mode

Sub menu

Description

COLOR TEMP Select either PRESET or USER to adjust the screen color.

Select the preset color temperature. PRESET • WARM: Set the screen to warm

color temperature .

•MEDIUM: Set the screen to medium color temperature.

•COOL: Set the screen to cool color temperature.

								USER	SIX COLOR
									Sets and stores the hue and saturation
									for six colors(RED/GREEN/BLUE/CYA
									for six colors(RED/GREEN/BLUE/CYA
									N/MAGENTA/YELLOW) to satisfy the
									color requirements of a user.
									color requirements of a user.

HUE

Adjusts the screen hue.

SATURATION

Adjusts the color sharpness on the

screen. Lower values make the color

sharpness weaker and colors lighter

while higher values make the color

sharpness stronger and colors darker.

RED

Set your own red color levels.

GREEN

Set your own green color levels.

BLUE

Set your own blue color levels.

GAMMA

Set your own gamma value. :

1.8/2.0/2.2/2.4/2.6

On the monitor, high gamma values

display whitish images and low gamma

values display blackish images.

Exit : Exit	COLOR
: Decrease	RESET
: Increase

: Select another sub-menu : Restart to select sub-menu

Resets the color settings to the factory default settings for the current input device.

On Screen Display(OSD) Selection and Adjustment

Main menu	Sub menu	Description

		HORIZONTAL
		VERTICAL
		CLOCK
	Exit : Exit
	: Decrease	PHASE
	: Increase	PHASE
	: Increase

: Select another sub-menu : Restart to select sub-menu

To move image left and right.

To move image up and down.

To minimize any vertical bars or stripes visible on the screen background.

The horizontal screen size will also change.

To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.

On Screen Display(OSD) Selection and Adjustment

Main menu	Sub menu	Description

LANGUAGE

POWER

INDICATOR


Exit : Exit
	: Decrease	WHITE
	: Increase	WHITE
	: Select another sub-menu	BALANCE
	: Restart to select sub-menu
	: Restart to select sub-menu

To choose the language in which the control names are displayed.

Use this function to set the power indicator on the front side of the monitor to ON or OFF.

If you set OFF, it will be turned off. If you set ON at any time, the power

indicator will automatically be turned on.

If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image.

Activate this function when white and black colors are present in the screen.

FACTORY Restore all factory default settings except

RESET "LANGUAGE."

Press the , buttons to reset immediately.

NOTE

If this does not improve the screen image, restore the factory default settings. If necessary, execute the WHITE BALANCE function again. This function will be enabled only when the input signal is an analog signal.

On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu.