LG Electronics USA HBS760 User Manual
English
HBS-760
User Manual
Bluetooth® Stereo Headset
Any modications or changes to this manual due to
typographical errors or inaccuracies of stated information
All rights reserved.
LG Electronics Inc., 2015
Note: For the best performance and
to prevent any damage to, or misuse of the
HBS-760, please read all of the information
carefully prior to using the HBS-760.
shall only be made by LG Electronics Inc.
Description of parts
ENG
LED Indicator
Power Switch
Charging Port
FF/REW Switch
PLAY/PAUSE/STOP Button
Package Contents
Extra Ear Gels
(small & large)
- The medium size Ear Gels are equipped to the product.
USB Charging Cable WEEE Card
User Manual
Specications
Bluetooth® specication
Battery
Standby time / Talk Time Up to 540 hours / Up to 16 hours
Music play time Up to 10.5 hours
Charging time Less than 2 hours
Charging rated input DC 4.75 V ~ 5.6 V, 400 mA
Operation temperature -10°C ~ 60°C
Dimension / weight 138 mm (W) x 171 mm (L) x 16.2 mm (H)/34.2 g
2
Item Description
4.1 (Headset / Hands-Free / A2DP Proles)
Battery 3.7 V / 210 mAh Li-Polymer
Microphone
VOLUME Switch (+/-)
CALL Button
Earbud (L)
Earbud (R)
(Europe Only)
How to Use
Power On / Power Off
- Slide the Power switch to the ON or OFF position.
Charging
- When the charger is connected (with the power on or off) the headset will turn off.
- While charging, the LED indicator will show a solid red light and then change to
violet when charged 80% and above.
- When charging is completed, the LED indicator will show a solid blue light.
Low Battery
- An announcement will be made once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Battery Status Alert
- Slide the VOLUME switch to the - position for 1 second.
Battery Status High Medium Low
Voice Prompt Battery High Battery Medium Battery Low
LED Indicator
Blinking
Blue
Blinking
Violet
Blinking
Red
ENG
3
How to Use
Pairing
ENG
- Before using the headset for the rst time, you must pair it with a Bluetooth-enabled
handset.
Easy Pairing (First Time Pairing)
1. Slide the Power switch to the ON position to turn on the HBS-760. When the
headset enters Pairing Mode, the LED indicator will show a solid blue light.
2. Using your handset, nd the Bluetooth Menu and search for or add new devices.
• Select LG HBS760 from the list of devices and pair it with your handset.
3. If asked for the Pass/PIN code please enter 0000 (4 Zeros).
* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to
enter Pass/PIN code.
• Once pairing has completed successfully, you will hear “Your headset paired.”
• The HBS-760 will automatically turn off if not paired within 3 minutes.
Manual Pairing (Pairing with another phone or re-pairing)
• With the power off, press the CALL button and slide the Power switch to the ON
position at the same time for 2 seconds.
• When the headset enters Pairing Mode, the LED indicator will show a solid blue
light. After the procedure repeat Easy Pairing steps 2 through 3.
4
How to Use
Multi-connection
Advanced Multipoint
The HBS-760 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets (see the pairing
instructions on page 4).
- Turn off the headset.
- With the power off, press the CALL button and slide the Power switch to the ON
position at the same time for 2 seconds to enter Manual Pairing mode.
- Pair and connect the headset with your other Bluetooth-enabled handset. (this
will be your primary handset).
- Once this handset is paired and connected, go back and connect the originally
paired handset to the headset. This will now be your secondary handset.
* NOTE: When the HBS-760 is connected to two handsets at the same time
(Multipoint), the headset calling functions will work with the primary handset.
* NOTE: In case of failure to connect to the primary phone through Easy Pairing,
HBS-760 will enter pairing mode.
Calling Function
- Voice Dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
Call Waiting
- While speaking on an active call, press the CALL button for 1 second to switch
to an incoming call.
- To switch between 2 active calls, press the CALL button for 1 second.
- To terminate the active call or both calls at once, briey press the CALL button.
- If both handsets are receiving an incoming call, the headset will default to the
primary device.
ENG
5
Loading...