LG Electronics USA HBM-905 User Manual

www.lg.com

LG Electronics

BLUETOOTH® Mono Headset
HBM-905

User Manual

English

All rights reserved.

LG Electronics Inc., 2010

Note : For the best performance and to

prevent any damage to, or misuse of the

HBM-905, please read all of the information

carefully prior to using the HBM-905.

Any modifi cations or changes to this manual

due to typographical errors or inaccuracies
of stated information shall only be made by

LG Electronics Inc.

Table of Contents

Introduction 3

ENG

- Included in Package 3
Part Description 4
How to use 4

- Change direction 4

- Charging 5

- Low battery 5

- Power on 5

- Power off 5

- Pairing 6

• Easy Pairing 6

• Manual Pairing 7

- Auto Reconnect 7

• Out of range 7

- Volume control 8

- Calling 8

• Answering a call 8

• Making a call 8

• Voice dialing 8

• Last number redial 9

• Ending a call 9

• Transferring a call 9

• Call waiting 9

• Call Reject 9

- Multipoint 9

• Multipoint Connect 10

• Calling Functions 10

TM

- Name Alert

• Enable/Disable ‘Name AlertTM’ 10

• Language Selection 11

- Battery Status Alert 11

- Audio Streaming (A2DP) 11

Summary of button functions 12
LED indication 13
Troubleshooting 13
Specification 14
Precautions 14
Declaration of confirmation 15
Additional information 15
Limited warranty 18
Important safety information 18

2 3

10

The LG Bluetooth® Headset HBM- 905 is a lightweight wireless Headset utilizing
Bluetooth® technology. This product can be used as an audio accessory for
devices supporting either the Headset,Handsfree or A2DP Bluetooth® Profi les.

Included in Package

LG HBM-905

Bluetooth

®

Headset

Ear-loops (2) Ear rubber (2)

User manual Quick Start Guide Warranty Card

Introduction

ENG

Part Description

Front

ENG

MIC

Back

Call Button/
LED Indicator

Volume Control
(Circulation)

PWR Switch

Charging Port

How to use

Change direction

4 5

Charging

- Remove the cover on the charging port and connect the charger.

- When the charger is connected, with power on or of

- While charging, the LED indicator will show a solid white light.

- The buttons will not function while the device is charging.

- It takes 2 hours to fully charge the Headset.

- When charging is complete, the LED indicator will turn off.

Low battery

- An announcement will be made once every 2 minutes.
(Speech: Battery very low

- If the battery is not charged, the headset will turn off.

Power on

- Move the power switch to the ‘ON’ position.
The power will turn on. (Speech: Ready,[“battery status”])

•

Power off

- Move the power switch to the ‘OFF’ position.

• The Bluetooth link will disconnect, and the power will turn of
(Speech: Powering Down)

Pairing

- Before using the headset for the fi rst time, you must pair it with a Bluetooth
enabled handset.

- There are 2 Pairing Methods with the HBM-905.

, please charge now)

How to use

f, the Headset will turn off.

f.

ENG