LG Electronics USA GM210 Users Manual

Multimedia

Video camera Menu 4.3

Mul ti m ed i a

You can record and save a video clip.

1. To start recording press the OK key. As soon as it starts to record, a timer will be displayed. Before recording a video clip, you can set the following options by pressing the left soft key [Options].

Video mode:

video file through

Resolution:

size. (176x144/320x240)

Quality:

image quality from and

Save to:

for a video clip. (Phone/External)

Effects:

(Off/Sepia/Mono/Negative)

Allows you to send

MMS

Allows you to set the

Super fine

You can set the save option

4 settings are available.

General

Normal, Fine

White balance:

change the settings according to the enviroment. (Auto/Daylight/ Incandescent/Cloudy/Fluorescent)

Reset settings:

the settings.

2. Press the left soft key[Stop]/confirm key/ camera hot key to end the recording.

3. The video clip you recorded is

automatically saved in the folder of My video, you can select the submenus by pressing the left soft key [Options].

Allows you to

Allows you to reset

stuff

. After recording a

Videos

New video:

You can record a new

video.

Play:

You can play the recorded

video clip.

Send via:

You can send the video

file via

message/Bluetooth

Album:

folder of

You can access the

My stuff

Videos

FM Radio Menu 4.4

1. Connect the headset with your phone.

2. After presetting radio channels, you can listen to other channel by pressing the corresponding number key (short press).

3. You can access the following option menus by pressing the left soft key [Options].

Edit channel:

You can adjust frequency and change the radio station in the selected channel. You can change the frequency with Left/Right navigation keys and number keys.

Auto scan:

Now?" On, automatically set the

If you select "Auto scan

radio channel. And When "Save this station" message will be popped up, if you select Yes, the selected frequency will be stored.

Reset all channels:

all channels you saved.

Listen via:

Select this to listen to the radio through Speaker/Wired headset/Bluetooth in the [Options].

Mul ti m ed i a

You can delete

Multimedia

Voice recorder Menu 4.5

Mul ti m ed i a

You can record a voice memo.

1. Press the OK key to start recording. Once recording is started, the message “

REC

time are displayed, talk into the microphone.

2. If you want to finish recording, press the right soft key [Stop]. The recorded file is automatically saved in

Sounds

3. If you press the left soft key [Options], you can select the submenus as follow:

” and the recording

folder of My

stuff

New voice record:

new voice recording.

Play:

You can play the recorded

voice memo.

Send via:

recorded sound file via Message/ Bluetooth

Album:

You can access the

folder of

You can start a

You can send the

My stuff

Sounds

New message Menu 5.1

This menu includes functions related to SMS (Short Message Service), MMS (Multimedia Message Service), as well as the network’s service messages.

Options

Send to:

Sends text messages.

1. Enter numbers of recipient.

2. Press the down navigation key to add more recipients.

3. You can add phone numbers in the contacts.

4. Press the left soft key [Options] and then select numbers. The message will automatically be saved in the folder. If the message has not been sent, it will remain in the with a failed status.

Send

after entering

Sent

Outbox

Messaging

Send to Group:

group.

Insert

Image:

You can add image.

Sound:

You can add sound.

Video:

You can add video.

Symbol:

You can add special

- characters.

Text template:

- Text templates already set in the phone.

Emoticon:

You can insert

emoticon.

Name& Number:

phone numbers or addresses in the contacts.

New slide:

new slide

Select this to add a

You can send to

You can use

You can add

Mes sa g in g

Messaging

Subject:

Mes sa g in g

Select this to insert a

subject.

Select this to add a Contact,

- a My Business card, Schedule, and Memo

Save to drafts:

Drafts

Set T9:

Activate/Deactivate T9 input

mode by selecting ON/OFF.

Writing language:

language for T9 input mode.

New T9 word: word

for inputting new word into

the dictionary.

Clear text:

You can clear text while

writing Message.

Exit:

If you select a message, you can end the writing message and back to the New message menu. The message you have written is not saved.

Stores messages

Select the

New T9

Exit

while writing

Note

If you select the picture (200K) on writing multimedia message, loading duration will take around 3 seconds at least. Furthermore, you can’t activate any key during loading time. After 3 seconds, it is available to write multimedia message.

Inbox Menu 5.2

You will be alerted when you have received messages. They will be stored in Inbox.

If the phone shows ‘

message

messages from Inbox.

❈ SIM message

SIM message means the message exceptionally stored in SIM card.

For notified multimedia message, you have to wait for downloading and processing of the message.

To read a message, select one of the messages by pressing the left soft key [Options].

The following options are available.

View:

You can view the received

messages.

No space for SIM

’, you have to delete only SIM

Delete:

You can delete the current

message.

Forward:

You can forward the

selected message to another party.

Return call:

You can call back to

the sender.

Save number:

You can save the sender’s phone number in the contacts.

Information:

You can view information about received messages.

Multi delete:

After selecting the messages you want to remove, you can delete the selected messages.

Delete all read:

You can delete all

messages read.

Delete all:

You can delete all

messages.

Mes sa g in g

Messaging

Drafts Menu 5.3

Mes sa g in g

Using this menu, you can preset multimedia messages that you use most frequently. This menu shows the preset multimedia message list.

The following options are available.

View:

You can see the multimedia

messages.

Edit:

Modifies the message you

choose.

Delete:

Deletes the message you

choose.

Information:

information about the message you choose.

Multi delete:

messages you want to remove, press the OK key and you can delete the selected messages.

Delete all:

messages in the folder.

You can view

After selecting the

Deletes all of the

Outbox Menu 5.4

You can view the list and contents of sending/resending/waiting/send fail in this menu and can also verify if the transmission was successful.

After sending the message successfully, the message will be moved to sent box.

The following options are available.

View:

You can view the message.

Delete:

You can delete the

message.

Resend:

You can resend the

selected message.

Edit:

Modifies the message you

choose.

Information:

information of each message.

Multi delete:

selected messages.

Delete all:

messages in the folder.

You can check

Select and delete the

You can delete all

Sent Menu 5.5

This menu allows you to view the messages which are already sent. You can check the time and the contents of message.

Listen to voicemail Menu 5.6

This menu provides you with a quick way of accessing your voice mailbox (if provided by your network). Before using this feature, you must enter the voice server number obtained from your network operator.

Once this menu has been selected, simply press the left soft key [OK] to listen to voice mail. You can also hold down the key in standby mode to listen to voicemail.

Note

When you receive a voicemail, your phone displays the icon and you hear an alert. Please check with your network provider for details of their service in order to configure the handset correctly.

Info message Menu 5.7

(Dep

endent to network and

subscription)

Info service messages are text messages delivered by the network to GSM. They provide general information such as weather reports, traffic news, taxis, pharmacies, and stock prices.

each type of Info message has a number; therefore, you can contact service provider as long as you have input the certain number for the information.

Mes sa g in g

Messaging

When you have received an info

Mes sa g in g

service message, you can see the popup message to show you that you have received a message or the info service message is directly displayed.

To view the message again or not in standby mode, follow the sequence shown below;

Read (Menu 5.7.1)

1. When you have received an info service message and select to view the message, it will be displayed on the screen. You can read another message by scrolling the left or right navigation key.

2. The message will be shown until another message is reached.

Read

Topics (Menu 5.7.2)

(Dependent to network and subscription)

You can see info service message numbers which you added. If you press the left soft key [Options], you can edit and delete info message category which you added.

You can select info service message numbers in the active list. if you activate an info service number, you can receive messages sent from the number.

Templates Menu 5.8

Text templates (Menu 5.8.1)

You have 6 text templates as below;

• Please, call me back .

• I’m late. I will be there at

• Where are you now?

• I am on the way.

• Urgent! Please, contact.

• I love you!

The following options are available.

View:

You can see selected

templates.

Edit:

Use this to write a new message or edit the selected template message from the text template list.

Send via

Message:

Use this to send the selected template message by message.

Delete:

Deletes the template.

New template:

Use this to create a

new template.

Delete all:

Allows you to delete all

template messages.

Multimedia templates

(Menu 5.8.2)

You can save a new multimedia template and edit the saved multimedia templates.

After saving new template, you can use the following options.

View:

You can see multimedia

templates.

Edit:

Use this to write a new message or edit the selected multimedia template message from the multimedia template list.

Send:

Use this to send the multimedia template message by MMS.

Mes sa g in g

Messaging

Delete:

Mes sa g in g

Deletes the multimedia

template.

New template:

new template.

Delete all:

Allows you to delete all

multimedia messages.

Use this to create a

Settings Menu 5.9

Text message (Menu 5.9.1)

Message types: Text, Voice, Fax, Paging, X.400, ERMES

Usually, the type of message is set to Text. You can convert your text into alternative formats. Contact your service provider for the availability of this function.

Validity period:

service allows you to set how long your messages will be stored at the message centre.

This network

Delivery report:

ON, you can check whether your

message is sent successfully.

Reply charging:

sent, it allows the recipients to reply

and charge the cost of the reply to

your telephone bill.

Message center number:

should enter the SMS Centre

number. Normally the SMS Centre

number is read from the SIM card.

If you set to

When a message is

you

Multimedia message

(Menu 5.9.2)

Slide duration:

duration of each page when writing

the message.

Delivery time:

message at a specific time.

Priority:

the message you choose.

Validity period:

service allows you to set how long

your messages will be stored at the

message centre.

Displays the

Deliver your

You can set the priority of

This network

Delivery reports:

You can set

ON/OFF in these menus.

- Request report:

Request reports to check out whether your messages are sent to the recipients successfully.

- Allow report:

When the senders request delivery reports, you can decide the report to be delivered or not.

Read report:

You can set ON/OFF in

these menus.

- Request report:

Request reports to check out whether your messages are read by the recipients

- Allow report:

When the senders request read reports, you can decide the report to be delivered or not.

Auto download:

You can receive multimedia messages automatically from Home network / Roaming network when you select ‘Automatic’ in this menu. But when you select ‘Manual’, you receive only notification messages in the inbox and then you can decide to receive multimedia messages in the option menu of Notifications.

Network profiles:

If you select multimedia message server, you can set URL for multimedia message server.

Permitted message types

Personal:

Personal message.

Advertisements:

Commercial

message.

Information:

Necessary

information.

Mes sa g in g

Messaging

Voicemail number (Menu 5.9.3)

Mes sa g in g

You can receive voicemail if your network service provider supports this feature. When a new voicemail is arrived, the symbol will be displayed on the screen. Please check with your network service provider for details of their service in order to configure the phone accordingly.

Service message (Menu 5.9.4)

You can set the option whether you will receive the message or not.

Info message (Menu 5.9.5)

Receive

On:

If you select this menu, your phone will receive Info service messages.

Off:

If you select this menu,

- your phone will not receive Info se68rvice messages any more.

Alerts

On:

Your phone will beep when you have received Info service message numbers.

Off:

Your phone will not beep

- even though you have received info service messages.

Languages

You can select the language you want by pressing the OK key. Then, the info service message will be shown in the language that you selected.

Images Menu 6.1

The Images folder consists of embedded links for downloading pictures through the internet and default images. To view the image in details, press the OK key.

When a file is selected, the following options will be displayed by pressing the left soft key [Options].

View:

You can see the selected file.

Delete:

Delete a selected file.

Set as

Wallpaper:

image can be set as a

Picture ID:

- image can be set as a

Send via:

to another device via

Bluetooth

Currently selected

Wallpaper

Currently selected

Picture ID

Send the selected file

Message,

File

Rename:

selected file. You cannot change the extension of file.

Move to folder:

- selected file to the folder.

Move to external memory

/ Move to phone memory:

Move the selected file to the external memory (if inserted) or multimedia memory in your phone.

Copy to external memory

/ Copy to phone memory:

Copy the selected file to the external memory or multimedia memory in your phone.

Information:

- information.

My stuff

Change the file name of

Move the

Show the file

My st u ff

My stuff

Print via Bluetooth:

My st u ff

that you have taken in the camera mode and downloaded through WAP can be transmitted via Bluetooth to a printer.

Slide show:

show of the files you stored.

New folder:

folder.

Multi delete:

number of files you selected.

Delete all:

Sort by:

by as

Thumbnail view/List view:

you to set the view type.

You can view a slide

You can create a new

Delete all files in the list.

You can arrange the files

Date, Type

Most pictures

You can remove a

and

Name

Allows

Sounds Menu 6.2

When a file is selected, the following options will be displayed by pressing the left soft key [Options].

Play:

You can play the selected file.

Delete:

Delete a selected file.

Set as:

Currently selected sound

can be set as a

ID/Message tones

Send via:

to another device via

Bluetooth

File

Rename:

of the selected file.

Move to folder:

- selected file to the folder.

Move to external memory

/ Move to phone memory:

Move the selected file to the external memory (if inserted) or multimedia memory in your phone.

Ringtone/ Ringtone

Send the selected file

Message,

Changes the file name

Move the

Copy to external memory / Copy to phone memory:

Copy the selected file to the external memory (if inserted) or multimedia memory in your phone.

Information:

Show the selected

file information.

New folder:

You can create a new

folder.

Multi delete:

You can remove a

number of files you selected.

Delete all:

Delete all files in the list.

Sort by:

You can arrange the files as

Date, Type

and

Name

Videos Menu 6.3

Show the list of 3GP, 3G2 files at My

My st u ff

media/Videos in Multimedia memory. Supported only .3gp files, that are encoded with MPEG4 and h.263 videocodecs and AMR audio-codec.

Here you can manage or send saved video clips. When a file is selected, the following options will be displayed by pressing the left soft key [Options].

Open:

You can open the selected

file.

Delete:

Delete a selected file.

Send via:

Send the selected file

to another device via

Bluetooth

File

Rename:

Change the file name of

Message,

selected file. The maximum length of characters is 59.

My stuff

Warning!

My st u ff

You can‘t use the following characters: \ / : * ? < > |

Move to folder:

selected file to the folder.

Move to external memory

/ Move to phone memory:

Move the selected file to the external memory (if inserted) or multimedia memory in your phone.

Copy to external memory

/ Copy to phone memory:

Copy the selected file to the external memory (if inserted) or multimedia memory in your phone.

Information:

- information.

Move the

Show the file

New folder:

folder.

Multi delete:

number of files you selected.

Delete all:

Sort by: Date, Type

You can create a new

You can remove a

Delete all files in the list.

You can arrange the files as

and

Name

Others Menu 6.4

Other files except images, sounds, videos are stored in this folder.

Profiles

In Profiles, you can adjust and customise the phone tones and volume.

There are five preset profiles:

Silent, Vibrate only, Outdoor Headset

Each profile can be personalised. Press the left soft key [Menu] and select Profiles using up/down navigation keys.

General

and

Activate (Menu 7.X.1)

1. A list of profiles is displayed.

2. In the Profiles list, scroll to the profile you want to activate and press the left soft key [OK] or the OK key.

Activate

3. Then, select

Personalize (Menu 7.X.2)

Scroll to the desired profile in the Profiles list(other than silent and

vibrate only). After pressing the left soft key or the OK key, select

Personalize

The profile setting option opens. Set the option as required.

Call alert type:

for incoming calls.

Ring tones:

tone from the list.

Ring volume:

ringing tone.

Message alert type:

type for messages.

Message tones:

tone for messages.

Set the alert type

Select the desired ring

Set the volume of the

Select the alert

Set the alert

Profi le s

Profiles

Message volume:

Profi le s

of Message tone.

Keypad tones:

keypad tone.

Keypad volume:

keypad tone.

Flip tones:

tone for adjusting environment.

Effect sound volume:

volume of effect sound.

Power on/off volume:

volume of the ringing tone when switching the phone on/off.

Note

All profiles cannot be renamed.

Allows to set the flip

Set the volume

Select the desired

Set the volume of

Set the

Search Menu 8.1

1. Select

that you want to search.

Note

You can access the Contacts

directly by pressing the right soft key [Contacts] in standby mode.

Instant searching is available by

inputting the initial letter of the name.

2. After finding the desired contact, you can make a call to the number by pressing the send key.

3. If you want to edit, delete, copy an entry select the left soft key [Options].

The following menu will be displayed.

View:

details.

Edit:

contact.

and enter the name

You can view each entry in

You can edit the selected

Contacts

New message:

found the number you want, you can send a selected number.

Send via:

of the contacts via

Bluetooth

Delete:

New Contact:

place (SIM/Phone) you want to save, you can add to the contacts.

Add to speed dial:

set the selected number to add a speed dial list.

Multi delete:

a number of files selected.

Copy to SIM / Copy to phone:

can copy an entry from phone to SIM or from SIM to phone.

Main number:

more than one number stored, select the one that you use most often. This main number will be displayed first.

After you have

messages

to the

You can send the data

messages/

You can delete an entry.

After selecting the

Allows you to

Allows you to remove

If a contact has

Conta ct s

You

Contacts

New contact Menu 8.2

Conta ct s

You can add or save a new contact. You can enter the name, different phone numbers and email addresses of a new contact. You can also assign the contact to groups, include a picture, assign a specific ringtone and enter the anniversary for the contact. You can enter and manage contact addresses depending on the memory usage.

Note

The contact entry fields may differ

when you add or save a contact in the SIM address in the SIM.

Maximum stored name and

number length depends on SIM card type.

Speed dials Menu 8.3

Using this menu you can manage speed dials.

You can assign any of the keys to

with a name list entry. You can

call directly by pressing this key.

Contacts

1. Open the the right soft key [Contacts] in standby mode.

Speed dial

2. Scroll to left soft key [OK].

3. If you want to add speed dial, select <Empty> by pressing the left soft key [Assign]. Then, you can search the name in the contacts.

4. After assigning the number as speed dial, you can change and delete the entry. You can also make a call or send a message by this number.

first by pressing

, then press the

Groups Menu 8.4

You can list up to the members per each group. In the handset memory, there are 7 default groups:

Friends, Colleagues, VIP, Group 1 Group 2

, and

Group 3

Select the group name that you want to manage by pressing the left soft key [Option]. The following submenus will be displayed.

View members:

members you have selected.

Group ringtone:

specify ring tone for the group members call.

Group icon:

the icon dependent on group.

Add member:

members.

Remove member:

the member from the group member list. But the name and the number will be remained in the

Contacts

Allows you to select

Family

Shows the group

Allows you to

You can add group

You can remove

Rename:

You can change a group

name.

Reset all:

Allows you to reset all

contacts.

Copy all Menu 8.5

You can copy entries from SIM card memory to phone memory and vice versa.

SIM to phone:

entry from SIM card to phone memory.

Phone to SIM:

entry from phone memory to SIM card.

You can copy the

Delete all Menu 8.6

You can delete all entries from SIM card or phone memory. This function requires the security code.

Conta ct s

Contacts

Settings Menu 8.7

Conta ct s

View options (Menu 8.7.1)

You can set the contact display option.

Name only:

information with only name.

Name & Number:

information with name and number.

With picture:

information with picture.

Set the contact

Backup Contacts (Menu 8.7.2)

(External Memory dependent)

You can save Contacts data to the others folder in external memory.

Restore Contacts (Menu 8.7.3)

(External Memory dependent)

You can save Vcard format(*.vcf) existd in My stuff ->External memory

-> Others to the Contacts.

Set the contact

Information Menu 8.8

Service dial number (Menu 8.8.1)

You can view the list of Service Dialling Numbers (SDN) assigned by your service provider (if supported by the SIM card).

Own number (Menu 8.8.2)

(SIM dependent)

You can save and check your own number in SIM card.

My business card (Menu 8.8.3)

This option allows you to create your own business card featuring name, any numbers. To create a new business card, press the left soft key [New] and enter the information into the fields. If you want to edit, delete or to send a business card, select the left soft key [Options].

Tools

Alarm clock Menu 9.1

You can set the alarm clock to go on at a specified time.

1. If there is no alarm, press the left soft key [New] to add a new alarm.

2. Set or cancel the alarm using the options for specifying whether the alarm is on or by choosing the alarm time.

Once

3. Select the repeat period:

Daily, Mon~Fri, Mon~Sat Sat~Sun

4. Select the alarm tone by using

Options

o the up/down navigation keys and select the sound you want, then press the left soft key [OK].

5. Edit the title and press the left soft key [Save].

Sounds

. You can press

Calculator Menu 9.2

The calculator module allows you to perform basic arithmetic functions such as addition, subtraction, multiplication, and division as well as some scientific functions.

1. You can enter numbers by using the number keys, and the operators by using navigation key.

Note

To erase any mistake or clear the

display, use the key.

To include a decimal point, press

the key.

To include parentheses, press the

key.

2. To calculate the result, press the OK key.

3. After calculation, press the right soft key to return to the initial state.

To o ls

Tools

Stopwatch Menu 9.3

To o ls

This menu allows you to record the elapsed time of an event.

1. Press the left soft key [Start] to take time and record the lap time by pressing the right soft key [Lap].

2. Press the left soft key [Stop] to ascertain the record of lap time.

3. Press the right soft key [Reset] to default condition.

Unit converter Menu 9.4

This converts any measurement into a unit you want. There are 7 types that can be converted into units:

Currency, Area, Length, Weight Temperature, Volume

and

Velocity

World clock Menu 9.5

The World clock function provides time information on major cities worldwide.

You can select the following options by pressing the left soft key [Options].

Change time zone:

change the time zone by selecting city.

New city:

city.

Daylight saving:

daylight saving time.

You can

You can add a desired

You can apply to

WINE + Menu 9.6

Using the wine function built in your

phone, you can search for information about wine .

WINE SEARCH

To search Type , Flavor, Region, Cost and Food which is related to Wine, Select the desired fuction with

/ and confirm the

selection with .

WINE DICTIONARY

Using Wine dictionary module, you can search for Wine terms.

WINE MAP

Using WINE MAP module, you can get information about Wine producer and learn how to read the wine label.

SIM services Menu 9.7

(SIM dependent)

With the SIM services menu your phone is future-proof and will support additions to your service provider’s service. For more information contact your service provider.

To o ls

Browser

You can access various WAP (Wireless

Brows e r

Application Protocol) services such as banking, news, weather reports and flight information. These services are specially designed for mobile phones and they are maintained by WAP service providers.

Check the availability of WAP services, pricing and tariffs with your network operator or the service provider whose service you wish to use. Service providers will also give you instructions on how to use their services.

Once connected, the homepage is displayed. The content depends on the service provider. To exit the browser at any time, press the key. The phone will return to the idle menu.

Navigating with the WAP browser

You can surf the Internet using either the phone keys or the WAP browser menu.

Using the phone keys

When surfing the Internet, the phone keys function differently to phone mode.

Icon Description

Scrolls each line of the content area

Returns to the previous page

Select options and confirm actions

Using the WAP browser menu

There are various menu options available when surfing the Mobile Web.

Note

The WAP browser menus may vary, depending on your browser version.

Home Menu *.1

Connects to a homepage. The homepage will be the site which is defined in the activated profile. It will be defined by the service provider if you have not defined it in the activated profile.

Yahoo ! Menu *.2

You can access Yahoo Mobile Internet Service.

oneSearch:

instant answers.

Note

Some of countries are unable to access Yahoo! service because of network service.

You can search for

Bookmarks Menu *.3

This menu allows you to store the URL of favourite web pages for easy access at a later time.

To create a bookmark

1. Press the left soft key [Options].

New bookmark

2. Select the OK key.

3. After entering the desired name and URL, press the OK key.

After selecting a desired bookmark, the following options are available.

Connect:

Connects to the selected

bookmark.

View:

You can see the selected

bookmark.

Edit:

You can edit the selected

bookmark.

Delete:

You can delete the selected

bookmark.

New bookmark:

create a new bookmark.

and press

Select this to

Brows e r

Browser

New folder:

Brows e r

new folder.

Move:

bookmark to sub folder.

Copy:

bookmark.

Send URL via:

bookmark via

Multi delete:

and delete saved bookmarks.

Delete all:

bookmarks.

Enter address Menu *.4

You can connect directly to the site you want. After entering a specific URL, press the left soft key [Options] and select the

Select this to create a

You can move the selected

You can copy the selected

Sends the selected

message

Allows you to select

Deletes all the

Connect

History Menu *.5

This menu shows the recently browsed pages.

Saved pages Menu *.6

The phone can save the page on

display as an offline file.

Settings Menu *.7

You can set the profile, cache and security related to internet service.

Network proles (Menu *.7.1)

A profile is the network information used to connect to the Internet.

There are default profiles for some

operators, stored in phone memory. It s impossible to rename default profiles.

Each profile has submenus as follows:

Activate:

Activates the selected

profile.

View:

You can see the selected

profile.

Edit:

You can edit the selected

profile.

New profile:

profile.

Delete:

from the list.

You can add a new

Deletes the selected profile

Rendering mode (Menu *.7.2)

You can adjust the size of URL page when the page is larger than phone screen.

Cache (Menu *.7.3)

The information or services you have accessed are saved in the cache memory of the phone.

Note

A cache is a buffer memory, which is used to save data temporarily.

Cookies (Menu *.7.4)

Enabling cookies allows you to store cookies sent from the server. Disabling this function will prevent cookies from being stored on your phone.

Security certicates (Menu *.7.5)

You can see the list of personal certificates that have been stored in your phone.

Brows e r

Browser

Show image (Menu *.7.6)

Brows e r

You can select to display image or not during WAP browsing.

Java script (Menu *.7.7)

Select whether to turn Java script on or off.

Memory in use (Menu *.7.8)

You can choose phone or external.

Information Menu *.8

You can view the information of WAP browser version.

Connectivity

Bluetooth Menu 0.1

Bluetooth enables compatible mobile devices, peripherals and computers that are in close proximity to communicate directly with each other without wires.

This handset supports built-in Bluetooth connectivity, which makes it possible to connect it. With compatible Bluetooth headsets, computer applications and so on.

Note

If you use LG PC Sync via

Bluetooth, you can exchange the data only within phonebook

When you receive data from

another Bluetooth device, the phone requests confirmation. After confirming the transfer, the file will be copied on to your phone.

Depending on the file type, it will

be stored in the following folders:

Video (.3gp, mp4):

Image (.bmp, gif, jpg, png):

- Images folder

Sound (.amr, wav, aac):

- folder

MP3 (.mp3):

Other files (.txt, html):

- folder

Videos folder

Sounds

Sounds/MP3 folder

Others

Conn e ct iv it y

Connectivity

Bluetooth on/off

Conn e ct iv it y

You can activate or cancel the Bluetooth function.

Device list

You can view all devices which your GM210 is already paired to. If you enter Paired devices, you access the options

Connect /Disconnect:

- pairing with headset or stereo headset, you should connect with those devices. Then you can use those devices.

New:

Allows to search new

- Bluetooth devices and add them to your phone’s list of paired devices. When you select New your handset will start to search for Bluetooth devices within range. Once the device you wish to pair appears on the list press the Right soft key [Stop]. Scroll to the desired device and press the left soft key [ok]. You will then be asked to enter a passcode.

After

The passcode can be any code you wish to use (the same passcode must be used by both devices) or is one that is pre-determined by the manufacturer of the device you are trying to pair with. Please check the User Manual of the device you are initiating the pair with to see if it already has a predetermined passcode in place.

Set as authorized /Set as

unauthorized:

set an unauthorized connection between each Bluetooth device. For example if you regularly use a Bluetooth headset with your phone then setting the connection as unauthorized will mean the headset will automatically connect to the handset each time the headset is powered on.

All services:

- services which are supported by Bluetooth device.

Delete:

- Bluetooth device.

Allows you to

Allows to view all

Allows to delete a paired

Rename:

Allows you to change the name of the paired Bluetooth device and how it is displayed on the handset.

Delete all:

Bluetooth settings

Allows to delete all the

paired Bluetooth devices.

My visibility:

whether or not your handset will be visible to other Bluetooth devices.

My name:

of Bluetooth device. The default name is LG GM210.

My address:

address of your Bluetooth device.

Primary storage:

phone or memory card.

This indicates

You can set the name

You can view the

You can choose

Network Menu 0.2

You can select a network which will be registered either automatically or manually.

Network selection (Menu 0.2.1)

Usually, the network selection is set to

Automatic

Automatic:

mode, the phone will automatically search for and select a network for you. Once you have selected

Automatic Automatic

is off and on.

Manual:

list of available networks and show you them. Then you can select the network which you want to use if this network has a roaming agreement with your home network operator. The phone let you select another network if the phone fails to access the selected network.

If you select

, the phone will be set to even though the power

The phone will find the

Automatic

Conn e ct iv it y

Connectivity

Preferred:

Conn e ct iv it y

preferred networks and the phone attempts to register with first, before attempting to register to any other networks. This list is set from the phone’s predefined list of known networks.

You can set a list of

GPRS attach (Menu 0.2.2)

You can set GPRS service depending on various situations.

Power on

If you select this menu, the phone is automatically registered to a GPRS network when you switch the phone on. Starting a WAP or PC dial-up application created the connection between phone and network and data transfer is possible. When you end the application, GPRS connection is ended but the registration to the GPRS network remains.

When needed

If you select this menu, the GPRS connection is established when you connect a WAP or application service and closed when you end the WAP or applicaion connection.

Access Point (Menu 0.2.3)

View:

You can see the selected

profile.

Edit:

You can edit the selected

profile.

New access point

•

Name:

You can type the network

name.

Bearer setting:

• bearer data service. Data/GPRS.

You can set the

Appears only if you select Data Settings as a Bearer/service.

- Dial number:

number to dial to access your WAP gateway.

- User ID:

dial-up server (and NOT the WAP gateway).

- Password:

by your dial-up server (and NOT the WAP gateway) to identify you.

- Call type:

call, Analog or Digital (ISDN)

- Linger time:

timeout period.

After entering that, the WAP navigation service will be unavailable if any data is not input or transferred.

Enter the telephone

The users identity for your

The password required

Select the type of data

You need to enter

- Primary server:

of the primary DNS server you access.

- Secondary Server:

address of the secondary DNS server you access.

The service settings are only available when GPRS is chosen as a bearer service.

APN:

User ID:

- APN server.

Password:

- by your APN server.

Primary Server:

- of the primary DNS server you access.

Secondary:

- of the secondary DNS server you access.

Input the IP address

Input the IP

Input the APN of the GPRS.

The users identify for your

The password required

Input the IP address

Conn e ct iv it y

Connectivity

USB connection mode

Conn e ct iv it y

Menu 0.3

You can choose one mode of Data service and USB Mass storage.

Mass storage

You can connect your phone to your PC, as a USB storage device, using the cable in three ways.

1. Connect the phone to the PC when the idle screen is displayed.

2. Connect the phone while it is performing an operation or menu function, and then move to the idle screen.

3. Connect the phone while it is performing an operation or menu function, and then select the

Mass Storage

menu.

USB

When you have finished using the the microSD memory, click Exit and take the following steps.

Caution!

Before you remove the cable, it is necessary that you click Exit. Or, the integrity of transferred data is not guaranteed.

1. Click on the notification area. [Unplug or Eject Hardware]

USB mass Storage Device

2. Select click on

Stop

message will appear: The

Storage Device

removed from the system.

3. Then remove the cable.

Data service

Select the use the LG Mobile Sync program.

. The following

can now be safely

Data service

USB mass

menu to

Settings

Date & Time Menu #.1

You can set functions relating to the date and time.

Set date (Menu #.1.1)

You can enter the current date.

Date format (Menu #.1.2)

You can set the Date format such as YYYY/MM/DD, DD/MM/YYYY, MM/ DD/YYYY. (D: Day / M: Month / Y: Year)

Set time (Menu #.1.3)

You can enter the current time.

Time format (Menu #.1.4)

Your can set the time format between 24 hours and 12 hours.

Auto update (Menu #.1.5)

Select On, the phone will automatically update the data and time.

Languages Menu #.2

You can change the language for the display texts in your phone. This change will also affect the language Input mode.

Display Menu #.3

Wallpaper (Menu #.3.1)

You can select the background pictures in standby mode.

Clock (Menu #.3.2)

You can select the clock format to display the clock on the Internal/ External Phone screen.

Backlight timer (Menu #.3.3)

You can set the light-up duration of the display.

Brightness (Menu #.3.4)

You can set the brightness of LCD.

Se t ti ngs

Settings

Home screen shortcut

Se t ti ngs

(Menu #.3.5)

If you select on, functionality of 4 navigation keys will be displayed on idle screen

Font size (Menu #.3.6)

You can change the font size for display text in your phone.

Theme (Menu #.3.7)

You can set the screen theme to be displayed on the main screen.

Menu style (Menu #.3.8)

Your phone provides you with

view

and

List view

Set the menu style by scrolling and pressing the left soft key [OK].

Dialing (Menu #.3.9)

You can set the font style/font size of the numbers which appear in the home screen when you make a call.

menu themes.

Grid

Standby text (Menu #.3.0)

If you select On, you can edit the text which is displayed in standby mode.

Network name (Menu #.3.*)

If this function is activated, network name will be displayed on LCD.

Shortcut Menu #.4

You can set the functions of 4 navigation keys for using shortcut in the idle mode.

Call Menu #.5

You can set the menu relevant to a call by pressing the left soft key [Select] in the

Call divert (Menu #.5.1)

The divert incoming voice calls, fax calls, and data calls to another number. For details, contact your service provider.

Call divert

Setting

service allows you to

menu.

All voice calls:

Diverts voice calls

unconditionally.

If busy:

Diverts voice calls when the

phone is in use.

If no reply:

Diverts voice calls

which you do not answer.

If out of reach:

Diverts voice calls when the phone is switched off or out of coverage.

All data calls:

Diverts to a number with a PC connection unconditionally.

All fax calls:

Diverts to a number with a fax connection unconditionally.

Cancel all:

Cancels all call divert

service.

The submenus

Call divert menus have the submenus shown below.

Activate:

Activate the

- corresponding service.

To voicemail number:

Forwards to message centre. This function is not shown at

All data calls

calls

menus.

To other number

and

: Inputs the

All fax

number for diverting.

To favourite number

: You can check

recent 5 diverted numbers.

Cancel:

Deactivate the

- corresponding service.

View status:

View the status of the

corresponding service.

Call barring (Menu #.5.2)

The Call barring service prevents your phone from making or receiving certain category of calls. This function requires the call barring password. You can view the following submenus.

All outgoing

The barring service for all outgoing calls.

Se t ti ngs

Settings

Outgoing international

Se t ti ngs

The barring service for all outgoing international calls.

O/G international expect home country

The barring service for all international outgoing calls when roaming

All incoming

The barring service for all incoming calls.

Incoming when abroad

The barring service for all incoming calls when roaming.

Cancel all barrings

You can cancel all barring services.

Change password

You can change the password for Call Barring Service.

The submenus:

- Activate

Allows to request the network to set call restriction on.

- Cancel

Set the selected call restriction off.

- View status

View the status whether the calls are barred or not.

Fixed dial number (Menu #.5.3)

(SIM dependent)

You can restrict your outgoing calls

to selected phone numbers. The numbers are protected by your PIN2 code.

You can restrict your outgoing calls to selected phone numbers.

Off

You can cancel fixed dialling function.

Number list

You can view the number list saved as Fixed dial number

Answer mode (Menu #.5.4)

Flip open:

If you select this menu, you can receive an incoming call when you open the flip.

Any key:

If you select this menu, you can receive a call by pressing any key except the end key and the right soft key.

Send key only:

menu, you can receive a call by only pressing the send key.

If you select this

Send my number (Menu #.5.5)

(network and subscription dependent)

Set by network:

you can send your phone number depending on two line service such as line 1 or line 2.

If you select this,

On:

You can send your phone number to another party. Your phone number will be shown on the receiver’s phone.

Off:

Your phone number will not be shown.

Call waiting (Menu #.5.6)

(network dependent)

Activate:

If you select

can accept a waiting (receiving) call.

Cancel:

If you select cannot recognize the waiting (receiving) call.

View status: Call waiting

Activate

Cancel

, you

Shows the status of .

, you

Minute minder (Menu #.5.7)

If you select On, you can check the call duration by a beep sound given every minute during a call.

Se t ti ngs

Settings

Auto redial (Menu #.5.8)

Se t ti ngs

On:

When this function is activated, the phone will automatically try to redial in the case of failure to connect a call.

Off:

Your phone will not make any attempts to redial when the original call has not connected.

Select line (Menu #.5.9)

(SIM dependent)

Depending on the support or not of 2 line services on your SIM card, you can select the line you wants.

Send DTMF tones (Menu #.5.0)

You can send touch tones during an active call to control your voice mailbox or other automated phone services.

Security Menu #.6

PIN code request (Menu #.6.1)

In this menu, you can set the phone to ask for the PIN code of your SIM card when the phone is switched on.

If this function is activated, you ll be requested to enter the PIN code.

1. Select PIN code request in the security settings menu, and then press the left soft key [OK].

On/Off

2. Set

3. If you want to change the setting, you need to enter PIN code when you switch on the phone.

4. If you enter wrong PIN code more than 3 times, the phone will lock out. If the PIN is blocked, you will need to key in PUK code.

5. You can enter your PUK code up to 10 times. If you put wrong PUK code more than 10 times, you can not unlock your phone. You will need to contact your service provider.

Phone lock (Menu #.6.2)

You can use a security code to avoid unauthorized use of the phone. Whenever you switch on the phone, the phone will request security code if you set phone lock to

If you set phone lock to

changed

, your phone will request security code only when you change your SIM card.

When switch

When SIM

Anti Theft Mobile Tracker

(Menu #.6.3)

The ATMT feature of this phone provides you with the ability to have a tracking system in place for your mobile in case you loose or misplace it. The moment an unauthorized user uses your phone, a SMS is triggered from your phone and the message is send to your pre-defined number. The SMS will be sent to your predefined numbers without the notice of the un-authorized user.

Change codes (Menu #.6.4)

PIN is an abbreviation of Personal Identification Number to prevent use by unauthorized person.

You can change the access codes:

Security code, PIN2 code, ATMT code

1. If you want to change the Security code/PIN2 code/ATMT Code, input your original code, and then press the left soft key [OK].

2. Input new Security code/PIN2 code/ATMT code and verify them.

Note

You can also change PIN code only if Pin code request option is ON.

Se t ti ngs

Settings

Flight mode Menu #.7

Se t ti ngs

This allows you to use only the phone features that do not require the use of the wireless network when you are in an airplane or in places where the wireless network is prevented.

If you set the flight mode on, the icon will be displayed on the screen instead of the network signal icon.

On:

You cannot make (or receive) any calls, including emergency calls, or use other features that require network coverage.

Off:

You can deactivate the flight mode and restart your handset to access the network.

Power save Menu #.8

Choose to switch the factory set power saving settings on or off.

Reset Menu #.9

You can initialize all factory defaults. You need

Security code

this function.

to activate

Memory status Menu #.0

You can check free space and memory usage of phone, SIM card and external memory (if inserted).

LG Electronics USA GM210 Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual