ENGLISH
LED LCD MONITOR
Please read this manual carefully before operating your set and retain it for future reference.
LED LCD MONITOR MODEL
E2242V
E2342V
E2442V
E2742V
www.lg.com
ENGLISH
2 TABLE OF CONTENTS
3 ASSEMBLING AND PREPARING
3Unpacking
4Parts and buttons
5Setting up the Monitor set
5- Attaching the Stand Base
6- Detaching the Stand Base
7- Mounting on a table
7 - Using the cable holder
9 - Mounting on a wall
20 TROUBLESHOOTING
22 SPECIFICATIONS
22E2242V
23E2342V
24E2442V
25E2742V
26Preset Modes (Resolution)
26Indicator
10 USING THE MONITOR SET |
27 Proper posture |
|||
10 |
Connecting to a PC |
|||
|
|
|||
27 Proper posture for using the Monitor set. |
||||
10 |
- D-SUB connection |
|||
|
|
|||
10 |
- DVI-D connection |
|
|
|
10 |
- HDMI connection |
|
|
12 CUSTOMIZING SETTINGS
13Customizing Settings
13- Menu Settings
14-PICTURE
15-COLOR
16-DISPLAY
16-VOLUME
17-OTHERS
18SUPER ENERGY SAVING Setting
19PICTURE MODE Setting
ASSEMBLING AND PREPARING 3
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
ENGLISH
CD(Owner's Manual) / |
D-SUB Cable |
|
Card |
||
|
Power Cord |
AC-DC Adapter |
( Depending on the country )
DVI-D Cable
(This cable is not included in all countries.)
or
AC-DC Adapter
( Depending on the country )
Stand Body |
Stand Body |
Two Screws |
Stand Base |
CAUTION
yyDo not use any unapproved accessories to ensure the safety and product life span.
yyAny damages or injuries by using unapproved accessories are not covered by the warranty.
NOTE
yyThe accessories supplied with your product may vary depending on the model.
yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
4 ASSEMBLING AND PREPARING
ENGLISH
Power Indicator yyLighting On: Turned on yyLighting Off: Turned off
(Power Button)
Button (See p.12) |
Connection panel (See p.10)
|
|
|
ASSEMBLING AND PREPARING 5 |
|
Setting up the Monitor set |
|
|
|
|
e2742v |
||||
Attaching the Stand Base |
1 |
Attach the Stand Body to the monitor set. |
||
2 |
Use two screws to fix the Stand Body and |
|||
1 Place the Monitor set with the screen side |
|
monitor set. |
||
3 |
Attach the Stand Base. |
|||
down on a flat and cushioned surface. |
4 |
Tighten the screw to the right with a coin. |
||
|
CAUTION
Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
Stand Body
2 E2242V/E2342V/E2442V
1 Attach the Stand Body to the monitor set.
2 Attach the Stand Base.
3 Tighten the screw to the right with a coin.
Stand Body
Stand Body
Stand Base
Stand Base
ENGLISH
ENGLISH
6 ASSEMBLING AND PREPARING
1Place the Monitor set with the screen side down on a flat and cushioned surface.
2E2242V/E2342V/E2442V
1Pull out the Stand Body and Stand Base from the monitor set.
2Turn the screw to the left with a coin.
3Pull out the Stand Base.
Stand Body
Stand Base
Stand Body
e2742v
1Turn the screw to the left with a coin.
2Pull out the Stand Base from the Stand Body.
3Remove two screws and pull out the Stand Body from the monitor set.
Stand Body
Stand Base
Stand Body
Stand Base |
CAUTION |
|
yyThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.
yyDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.
|
ASSEMBLING AND PREPARING 7 |
|
|
|
|
Mounting on a table |
3 Press (Power) button on the bottom switch |
|
|
panel to turn the power on. |
|
1 Lift and tilt the Monitor set into its upright |
|
|
position on a table. |
|
|
Leave a 10 cm (minimum) space from the wall |
|
|
for proper ventilation. |
CAUTION |
|
|
10 cm
10 cm
10 cm
10 cm
Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.
ENGLISH
2 Connect the AC-DC Adapter and Power Cord to a wall outlet.
Cable holder
or
ENGLISH
8 ASSEMBLING AND PREPARING
arning |
Using the Kensington security system |
When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.
Do
Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.
NOTE
+20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.
The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.
Connect the Kensington security system cable between the Monitor set and a table.
NOTE
The Kensington security system is optional. You can obtain it from most electronics stores.
Front |
Rear |
ASSEMBLING AND PREPARING 9
For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
10 cm
10 cm
10 cm
10 cm
If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.
When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.
1Please, Use the screw and wall mount interface in accordance with VESA Standards.
2If you use screw longer than standard, the monitor might be damaged internally.
3If you use improper screw, the product might be damaged and drop from mounted position. In
this case, LG Electronics is not responsible for it.
4VESA compatible.
5Please use VESA standard as below.
yy784.8 mm (30.9 inch) and under
*Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x
Length 10 mm
yy787.4 mm (31.0 inch) and above
*Please use VESA standard wall mount pad and screws.
Model |
|
|
|
|
|
|
|
|
E2242V |
|
|
E2442V |
|
|
|
|
|
E2342V |
|
|
E2742V |
|
ENGLISH |
Number of screws |
4 |
|
|
|
|
||
VESA (A x B) |
75 x 75 |
100 x 100 |
|
||||
Standard screw |
M4 |
|
|
|
|
||
|
|
|
|
|
|
|
|
CAUTION
yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.
yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.
yyUse only an authorized LG wall mount and contact the local dealer or qualified personnel.
yyDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.
yyUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper
accessory are not covered by the warranty.
NOTE
yyUse the screws that are listed on the VESA standard screw specifications.
yyThe wall mount kit will include an installation manual and necessary parts.
yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.
yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.
yyFor more information, refer to the instructions supplied with the wall mount.