Control Panel Functions
SUPER ENERGY Use this button to enter SUPER ENERGY SAVING SAVING Button menus.For more information, refer to page 15 .
(For D-SUB and DVI input)
E2241V/E2341V/E2341VG/E2441V:1920 x 1080
(Only for HDMI input)
INPUT Button When more than two input signals are connected, you can (SOURCE Hot key) select the input signal (D-SUB/DVI/HDMI) you want. When
|
only one signal is connected, it is automatically detected. |
|
The default setting is D-Sub. |
|
|
EXIT Button |
Exit the OSD(On Screen Display). |
|
|
Power Button & Use this button to turn the display on or off. |
|
Power Indicator |
The power indicator stays blue if the display is running |
|
properly (On Mode). If the display is in Sleep Mode, the |
|
power indicator is blinking blue. |
|
|
|
|
10
e
1n
.
2s.
3
4
/
/
.
n
11
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment, and setting menus.
Main menu |
Sub-menu |
MENU BRIGHTNESS
ORIGINAL RATIO
COLOR PRESET
BLACK LEVEL
LANGUAGE
FACTORY RESET
SUPER
ENERGY ON
SAVING
OFF
RESET
Supported input |
Description |
To adjust the brightness of the screen
To adjust the image size
To customize the color of the screen
To adjust the black level of the screen
To customize the screen status for a user's operating environment
Turn on the SUPER ENERGY
SAVING function.
Turn off the SUPER ENERGY
SAVING function.
Initialize the SUPER ENERGY
SAVING and set to "OFF" mode.
NOTE
The order of icons may differ depending on the model (13~17).
12
9
,
13
(Only HDMI input)
14
15