This booklet is made from 60% post-consumer recycled paper.
seguridad del producto
Información sobre la garantía y
Product Safety & Warranty Information
MBM64596801 (1.0)
Violation of the instructions may cause serious
injury or death.
WARNING: This product contains chemicals known to the State of
California to cause cancer and birth defects or other reproductive harm.
Wash hands after handling.
●
Never use an unapproved battery since this
could damage the phone and/or battery and
could cause the battery to explode.
●Never place your phone in a microwave oven as
it will cause the battery to explode.
●Never store your phone in temperatures less
than -4°F or greater than 122°F.
●Do not dispose of your battery near fire or with
hazardous or flammable materials.
●When riding in a car, do not leave your phone
or set up the hands-free kit near the air bag. If
wireless equipment is improperly installed and
the air bag is deployed, you may be seriously
injured.
●Do not use the phone in areas where its use is
prohibited. (For example: aircraft)
●Do not expose the battery charger or adapter
to direct sunlight or use it in places with high
humidity, such as a bathroom.
● Do not use harsh chemicals (such as alcohol,
benzene, thinners, etc.) or detergents to clean
your phone. This could cause a fire.
●Do not drop, strike, or shake your phone
severely. It may harm the internal circuit boards
of the phone.
1
●Do not use your phone in high explosive areas
as the phone may generate sparks.
●Make sure that no sharp-edged items, such as
animal’s teeth or nails, come into contact with
the battery. This could cause a fire.
●Do not damage the power cord by bending,
twisting, pulling, or heating. Do not use the plug
if it is loose as it may cause electric shock or fire.
●Do not place any heavy items on the power
cord. Do not allow the power cord to be
crimped as it may cause electric shock or fire.
●Do not handle the phone with wet hands while
●Store the battery out of reach of children.
●Be careful that children do not swallow any
parts (such as earphone, connection parts of
the phone, etc.) This could cause asphyxiation or
suffocation resulting in serious injury or death.
●Unplug the power cord and charger during
lightning storms to avoid electric shock or fire.
it is being charged. It may cause an electric
shock or seriously damage your phone.
●Do not disassemble the phone.
●Do not place or answer calls while charging the
phone as it may short-circuit the phone and/or
cause electric shock or fire.
●Do not hold or let the antenna come in contact
with your body during a call.
●Only use the batteries and chargers provided by
LG. The warranty will not be applied to products
provided by other suppliers.
●Only authorized personnel should service the
phone and its accessories. Faulty installation
or service may result in accidents and
consequently invalidate the warranty.
2
●An emergency call can be made only within a
service area. For an emergency call, make sure
that you are within a service area and that the
phone is turned on.
●Your phone is an electronic device that
generates heat during normal operation.
Extremely prolonged, direct skin contact in the
absence of adequate ventilation may result
in discomfort or minor burns. Therefore, use
care when handling your phone during or
immediately after operation.
HAC statement
This phone has been tested and rated for use with hearing aids for
some of the wireless technologies that it uses. However, there may
be some newer wireless technologies used in this phone that have
not been tested yet for use with hearing aids. It is important to
try the different features of this phone thoroughly and in different
locations, using your hearing aid or cochlear implant, to determine
if you hear any interfering noise. Consult your service provider or
the manufacturer of this phone for information on hearing aid
compatibility. If you have questions about return or exchange
policies, consult your service provider or phone retailer.
FCC RF Exposure Information
WARNING! Read this information before operating the phone.
In August 1996, the Federal Communications Commission (FCC) of
the United States, with its action in Report and Order FCC 96-326,
adopted an updated safety standard for human exposure to Radio
Frequency (RF) electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international standards
bodies. The design of this phone complies with the FCC guidelines
and these international standards.
3
Body-worn Operation
This device was tested for typical body-worn operations with the
back of the phone kept 0.39 inches (1cm) between the user’s
body and the back of the phone. To comply with FCC RF exposure
requirements, a minimum separation distance of 0.39 inches (1cm)
must be maintained between the user’s body and the back of
the phone. Third-party belt-clips, holsters, and similar accessories
containing metallic components may not be used. Body-worn
accessories that cannot maintain 0.39 inches (1cm) separation
distance between the user’s body and the back of the phone, and
have not been tested for typical body-worn operations may not
comply with FCC RF exposure limits and should be avoided.
Caution
Use only the supplied antenna. Use of unauthorized antennas (or
modifications to the antenna) could impair call quality, damage the
phone, void your warranty and/or violate FCC regulations.
Don't use the phone with a damaged antenna. A damaged
antenna could cause a minor skin burn. Contact your local dealer
for a replacement antenna.
4
Consumer Information About
Radio Frequency Emissions
Your wireless phone, which contains a radio transmitter
and receiver, emits radio frequency energy during use. The
following consumer information addresses commonly asked
questions about the health effects of wireless phones.
Are wireless phones safe?
Scientific research on the subject of wireless phones and radio
frequency (“RF”) energy has been conducted worldwide for
many years, and continues. In the United States, the Food and
Drug Administration (“FDA”) and the Federal Communications
Commission (“FCC”) set policies and procedures for wireless
phones. The FDA issued a website publication on health issues
related to cell phone usage where it states, “The scientific
community at large … believes that the weight of scientific
evidence does not show an association between exposure
to radiofrequency (RF) from cell phones and adverse health
outcomes. Still the scientific community does recommend
conducting additional research to address gaps in knowledge. That
research is being conducted around the world and FDA continues
to monitor developments in this field. You can access the joint
FDA/FCC website at http://www.fda.gov (under “c”in the subject
index, select Cell Phones > Research). You can also contact the
FDA toll-free at (888) 463-6332 or (888) INFO-FDA. In June 2000,
the FDA entered into a cooperative research and development
agreement through which additional scientific research is being
conducted. The FCC issued its own website publication stating
that “there is no scientific evidence that proves that wireless phone
usage can lead to cancer or a variety of other problems, including
headaches, dizziness or memory loss.” This publication is available
at http://www.fcc.gov/cgb/ cellular.html or through the FCC at
(888) 225-5322 or (888) CALL-FCC.
What does “SAR” mean?
In 1996, the FCC, working with the FDA, the U.S. Environmental
Protection Agency, and other agencies, established RF exposure
safety guidelines for wireless phones in the United States. Before a
wireless phone model is available for sale to the public, it must be
tested by the manufacturer and certified to the FCC that it does
not exceed limits established by the FCC. One of these limits is
expressed as a Specific Absorption Rate, or “SAR.” SAR is a measure
of the rate of absorption of RF energy in the body. Tests for SAR are
conducted with the phone transmitting at its highest power level in
all tested frequency bands. Since 1996, the FCC has required that the
SAR of handheld wireless phones not exceed 1.6 watts per kilogram,
averaged over one gram of tissue.
Although the SAR is determined at the highest power level, the
actual SAR value of a wireless phone while operating can be less
than the reported SAR value. This is because the SAR value may
vary from call to call, depending on factors such as proximity to
a cell site, the proximity of the phone to the body while in use,
and the use of hands-free devices. For more information about
SARs, see the FCC’s OET Bulletins 56 and 65 at http://www.fcc.gov/
Bureaus/Engineering_Technology/Documents/bulletins or visit
the Cellular Telecom munications Industry Association website at
http://www.ctia.org/consumer_info/index.cfm/AID/10371. You may
also wish to contact the manufacturer of your phone.
Can I minimize my RF exposure?
If you are concerned about RF, there are several simple steps
you can take to minimize your RF exposure. You can, of course,
reduce your talk time. You can place more distance between
your body and the source of the RF, as the exposure level drops
off dramatically with distance. The FDA/FCC website states that
“hands-free kits can be used with wireless phones for convenience
and comfort. These systems reduce the absorption of RF energy
5
in the head because the phone, which is the source of the RF
emissions, will not be placed against the head. On the other hand,
if the phone is mounted against the waist or other part of the
body during use, then that part of the body will absorb more RF
energy. Wireless phones marketed in the U.S. are required to meet
safety requirements regardless of whether they are used against
the head or against the body. Either configuration should result
in compliance with the safety limit.” Also, if you use your wireless
phone while in a car, you can use a phone with an antenna on
the outside of the vehicle. You should also read and follow your
wireless phone manufacturer’s instructions for the safe operation
of your phone.
Do wireless phones pose any special risks to children?
The FDA/FCC website states that “the scientific evidence does
not show a danger to users of wireless communication devices,
including children.” The FDA/FCC website further states that “some
groups sponsored by other national governments have advised
that children be discouraged from using wireless phones at all”.
For example, the Stewart Report from the United Kingdom [“UK”]
made such a recommendation in December 2000. In this report a
group of independent experts noted that no evidence exists that
6
using a cell phone causes brain tumors or other ill effects. [The
UK’s] recommendation to limit cell phone use by children was
strictly precautionary; it was not based on scientific evidence that
any health hazard exists. A copy of the UK’s leaflet is available at
http://www.dh.gov.uk (search “mobile”), or you can write to: NRPB,
Chilton, Didcot, Oxon OX11 ORQ, United Kingdom. Copies of
the UK’s annual reports on mobile phones and RF are available
online at www.iegmp.org.uk and http://www.hpa.org.uk/radiation/
(search “mobile”). Parents who wish to reduce their children’s RF
exposure may choose to restrict their children’s wireless phone use.
Where can I get further information about RF emissions?
For further information, see the following additional resources
(websites current as of April 2005):
U.S. Food and Drug Administration
FDA Consumer magazine
November-December 2000
Telephone: (888) INFO-FDA
http://www.fda.gov (Under “c” in the subject index, select Cell
Phones > Research.)
Engineering in Medicine and Biology Society, Committee on
Man and Radiation (COMAR) of the Institute of Electrical and
Electronics Engineers
http://ewh.ieee.org/soc/embs/comar/
Consumer Information on SAR
(Specific Absorption Rate)
This model phone meets the Government’s requirements for
exposure to radio waves. Your wireless phone is a radio transmitter
and receiver. It is designed and manufactured not to exceed
the emission limits for exposure to radiofrequency (RF) energy
set by the Federal Communications Commission (FCC) of the
U.S. Government. These FCC exposure limits are derived from
the recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE). In
both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature related
to the biological effects of RF energy.
The exposure limit for wireless mobile phones employs a unit of
8
measurement known as the Specific Absorption Rate, or SAR. The
SAR is a measure of the rate of absorption of RF energy by the
human body expressed in units of watts per kilogram (W/kg). The
FCC requires wireless phones to comply with a safety limit of 1.6
watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates
a substantial margin of safety to give additional protection to the
public and to account for any variations in measurements. Tests for
SAR are conducted using standard operating positions specified by
the FCC with the phone transmitting at its highest certified power
level in all tested frequency bands. Although SAR is determined
at the highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum value.
Because the phone is designed to operate at multiple power levels
to use only the power required to reach the network, in general,
the closer you are to a wireless base station antenna, the lower the
power output.
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit
established by the government adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g.,
at the ear and worn on the body) as required by the FCC for each
model.
The FCC has granted an Equipment Authorization for this model
0.32
phone with all reported SAR levels evaluated as in compliance with
the FCC RF emission guidelines.
The highest SAR values are:
• Head: 0.39 W/kg
• Body (Body-worn/Hotspot): 1.07 W/kg
(body measurements differ among phone models, depending
upon available accessories and FCC requirements).
While there may be differences between SAR levels of various
phones and at various positions, they all meet the government
requirement for safe exposure.
SAR information on this model phone is on file with the FCC and
can be found under the Display Grant section of http://www.fcc.
gov/oet/ea/fccid/ after searching on FCC ID ZNFD631.
To find information that pertains to a particular model phone,
this site uses the phone FCC ID number which is usually printed
somewhere on the case of the phone. Sometimes it may be
necessary to remove the battery pack to find the number. Once
you have the FCC ID number for a particular phone, follow the
instructions on the website and it should provide values for typical
or maximum SAR for a particular phone. Additional information
on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA) website at http://
www.ctia.org/
* In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram
of tissue. The standard incorporates a substantial margin of safety
to give additional protection for the public and to account for any
variations in measurements.
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids. The intent of the HAC Act is to
ensure reasonable access to telecommunications services for
persons with hearing disabilities.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a buzzing,
humming, or whining noise. Some hearing devices are more
immune than others to this interference noise, and phones also
9
vary in the amount of interference they generate.
The wireless telephone industry has developed a rating system for
wireless phones, to assist hearing device users to find phones that
may be compatible with their hearing devices. Not all phones have
been rated. Phones that are rated have the rating on their box or a
label located on the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than phones
that are not labeled. T4 is the better/ higher of the two ratings.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find this
rating. Higher ratings mean that the hearing device is relatively
10
immune to interference noise. The hearing aid and wireless phone
rating values are then added together. A sum of 5 is considered
acceptable for normal use. A sum of 6 is considered for best use.
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This should provide the hearing aid user with
“normal usage” while using their hearing aid with the particular
wireless phone. “Normal usage” in this context is defined as a signal
quality that’s acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The T
mark is intended to be synonymous with the UT mark. The M and
T marks are recommended by the Alliance for Telecommunications
Industries Solutions (ATIS). The U and UT marks are referenced in
Section 20.19 of the FCC Rules. The HAC rating and measurement
procedure are described in the American National Standards
Institute (ANSI) C63.19 standard.
To ensure that the Hearing Aid Compatibility rating for your phone
is maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call.
This phone has been tested and rated for use with hearing aids for
some of the wireless technologies that it uses. However, there may
be some newer wireless technologies used in this phone that have
not been tested yet for use with hearing aids. It is important to
try the different features of this phone thoroughly and in different
locations, using your hearing aid or cochlear implant, to determine
if you hear any interfering noise. Consult your service provider or
the manufacturer of this phone for information on hearing aid
compatibility. If you have questions about return or exchange
policies, consult your service provider or phone retailer.
For information about hearing aids and digital wireless phones
Prolonged exposure to loud sounds (including music) is the
most common cause of preventable hearing loss. Some scientific
research suggests that using portable audio devices, such as
portable music players and cellular telephones, at high volume
settings for long durations may lead to permanent noise-induced
hearing loss. This includes the use of headphones (including
11
headsets, earbuds and Bluetooth® or other wireless devices).
Exposure to very loud sound has also been associated in some
studies with tinnitus (a ringing in the ear), hypersensitivity to sound
and distorted hearing. Individual susceptibility to noise-induced
hearing loss and other potential hearing problems varies.
The amount of sound produced by a portable audio device
varies depending on the nature of the sound, the device, the
device settings and the headphones. You should follow some
commonsense recommendations when using any portable audio
device:
● Set the volume in a quiet environment and select the lowest
volume at which you can hear adequately.
● When using headphones, turn the volume down if you cannot
hear the people speaking near you or if the person sitting next
to you can hear what you are listening to.
● Do not turn the volume up to block out noisy surroundings.
If you choose to listen to your portable device in a noisy
environment, use noise-cancelling headphones to block out
background environmental noise.
● Limit the amount of time you listen. As the volume increases,
less time is required before your hearing could be affected.
12
● Avoid using headphones after exposure to extremely loud
noises, such as rock concerts, that might cause temporary
hearing loss. Temporary hearing loss might cause unsafe
volumes to sound normal.
● Do not listen at any volume that causes you discomfort. If
you experience ringing in your ears, hear muffled speech or
experience any temporary hearing difficulty after listening to
your portable audio device, discontinue use and consult your
doctor.
Wi-Fi Caution
This device is capable of operating in 802.11a/n mode. For
802.11a/n devices operating in the frequency range of 5.15 –
5.25 GHz, they are restricted for indoor operations to reduce any
potential harmful interference for Mobile Satellite Services (MSS) in
the US. Wi-Fi Access Points that are capable of allowing your device
to operate in 802.11a/n mode(5.15 – 5.25 GHz band) are optimized
for indoor use only.
If your Wi-Fi network is capable of operating in this mode, please
restrict your Wi-Fi use indoors to not violate federal regulations to
protect Mobile Satellite Services.
TIA Safety Information
The following is the complete TIA Safety Information for wireless
handheld phones.
Exposure to Radio Frequency Signal
Your wireless handheld portable phone is a low power radio
transmitter and receiver. When ON, it receives and sends out Radio
Frequency (RF) signals.
In August, 1996, the Federal Communications Commissions (FCC)
adopted RF exposure guidelines with safety levels for handheld
wireless phones. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standards
bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
* American National Standards Institute; National Council
on Radiation Protection and Measurements; International
Commission on Non-Ionizing Radiation Protection
Those standards were based on comprehensive and periodic
evaluations of the relevant scientific literature. For example,
over 120 scientists, engineers, and physicians from universities,
government health agencies, and industry reviewed the available
body of research to develop the ANSI Standard (C95.1).
The design of your phone complies with the FCC guidelines (and
those standards).
Antenna Care
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could
damage the phone and may violate FCC regulations.
Tips on Efficient Operation
For your phone to operate most efficiently:
Don’t touch the antenna unnecessarily when the phone is in use.
Contact with the antenna affects call quality and may cause the
phone to operate at a higher power level than otherwise needed.
13
Electronic Devices
Most modern electronic equipment is shielded from RF signals.
However, certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
Pacemakers
The Health Industry Manufacturers Association recommends that
a minimum separation of six (6) inches be maintained between
a handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with
pacemakers:
● Should ALWAYS keep the phone more than six (6) inches from
their pacemaker when the phone is turned ON;
● Should not carry the phone in a breast pocket;
● Should use the ear opposite the pacemaker to minimize the
potential for interference;
● Should turn the phone OFF immediately if there is any reason
to suspect that interference is taking place.
14
Hearing Aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may want to consult
your service provider (or call the customer service line to discuss
alternatives).
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
Health Care Facilities
Turn your phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care
facilities may use equipment that could be sensitive to external RF
energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles. Check with the manufacturer
or its representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has been added
to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted notices so
require.
Aircraft
FCC regulations prohibit using your phone while in the air. Switch
OFF your phone before boarding an aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn your phone
OFF when in a “blasting area” or in areas posted: “Turn off two-way
radio”. Obey all signs and instructions.
Potentially Explosive Atmosphere
Turn your phone OFF when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily injury or
even death.
Areas with a potentially explosive atmosphere are often, but not
always marked clearly. Potential areas may include: fueling areas
(such as gasoline stations); below deck on boats; fuel or chemical
transfer or storage facilities; vehicles using liquefied petroleum
gas (such as propane or butane); areas where the air contains
chemicals or particles (such as grain, dust, or metal powders); and
any other area where you would normally be advised to turn off
your vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in the
area over the air bag or in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the air bag inflates,
serious injury could result.
15
Part 15.19 statement
This device complies with part15 of FCC rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Part 15.21 statement
Change or Modifications that are not expressly approved by
the manufacturer could void the user’s authority to operate the
equipment.
Part 15.105 statement
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
16
in a particular installation. If this equipment does cause harmful
interference or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Safety Information
Please read and observe the following information for safe and
proper use of your phone and to prevent damage.
Violation of the instructions may cause minor or serious
damage to the product.
● Do not disassemble or open crush, bend or deform, puncture or
shred.
● Do not modify or remanufacture, attempt to insert foreign
objects into the battery, immerse or expose to water or
other liquids, expose to fire, explosion or other hazard. Such
conditions may present the risk of fire or explosion.
● Only use the battery for the system for which it is specified.
● Only use the battery with a charging system that has been
qualified with the system per CTIA Certification Requirements
for Battery System Compliance to IEEE1725. Use of an
unqualified battery or charger may present a risk of fire,
explosion, leakage, or other hazard.
● Do not short circuit a battery or allow metallic conductive
objects to contact battery terminals.
● Replace the battery only with another battery that has been
LG-approved and qualified with the system per this standard,
IEEE-Std-1725. Use of an unqualified and non-LG-approved
battery may present a risk of fire, explosion, leakage or other
hazard.
● Only authorized service providers shall replace battery(If the
battery is non-user replaceable).
● Promptly dispose of used batteries in accordance with local
regulations.
● Battery usage by children should be supervised.
● Avoid dropping the phone, battery or exposing the phone
or battery to a liquid. If the phone or battery is dropped,
especially on a hard surface, or is exposed to a liquid or comes
into contact with a sharp object take it to a service center for
inspection.
● At least, one of the Authentication methods may be
● Improper battery use may result in a fire, explosion or other
hazard.
Charger and Adapter Safety
● The charger and adapter are intended for indoor use only.
● Insert the battery pack charger vertically into the wall power
socket.
● Only use the LG-approved battery charger. Otherwise, you may
cause serious damage to your phone.
● Use the correct adapter for your phone when using the battery
pack charger abroad.
17
Battery Information and Care
● Always unplug the charger from the wall socket after the phone
is fully charged to save unnecessary power consumption of the
charger.
● Please read the manual of proper installation and removal of
the battery.
● Please read the manual of specified charger about charging
method.
● Do not damage the power cord by bending, twisting, or
heating. Do not use the plug if it is loose as it may cause electric
shock or fire.
● Do not place any heavy items on the power cord. Do not allow
the power cord to be crimped as it may cause electric shock or
fire.
● Unplug the power cord prior to cleaning your phone, and clean
the power plug pin when it’s dirty. When using the power plug,
ensure that it’s firmly connected. If not, it may cause excessive
heat or fire. If you put your phone in a pocket or bag without
covering the receptacle of the phone (power plug pin), metallic
articles (such as a coin, paperclip or pen) may short-circuit the
18
phone. Always cover the receptacle when not in use.
● Recharge the battery after long periods of non-use to maximize
battery life. Battery life will vary due to usage pattern and
environmental conditions.
● Please use only an LG-approved charging accessory to charge
your LG phone. Improper handling of the charging port, as well
as the use of an incompatible charger, may cause damage to
your phone and void the warranty.
● Never store your phone in temperature less than -4°F or greater
than 122°F. Charge the battery in range of 0°C ~ 45°C.
● Charging temperature range is regulated between 0°C/32°F and
45°C/113°F. Do not charge the battery out of recommended
temperature range. Charging out of recommended range might
cause the generating heat or serious damage of battery. And
also, it might cause the deterioration of battery's characteristics
and cycle life.
● Do not use or leave the battery under the blazing sun or in
heated car by sunshine. The battery may generate heat, smoke
or flame. And also, it might cause the deterioration of battery’s
characteristics or cycle life.
● The battery pack has protection circuit to avoid the danger.
Do not use nearby the place where generates static electricity
more than 100V which gives damage to the protection circuit. If
the protection circuit were broken, the battery would generate
smoke, rupture or flame.
● When the battery has rust, bad smell or something abnormal at
first-time-using, do not use the equipment and go to bring the
battery to the shop which it was bought.
● In case younger children use the battery, their parents should
teach them how to use batteries according to the manual with
care.
● If the skin or cloth is smeared with liquid from the battery, wash
with fresh water. It may cause the skin inflammation. Remove
and do not use the battery.
● Do not handle the phone with wet hands while it is being
charged. It may cause an electric shock or seriously damage
your phone.
● Do not place or answer calls while charging the phone as it may
short-circuit the phone and/or cause electric shock or fire.
● The charger and adapter are intended for indoor use only.
● Insert the battery pack charger vertically into the wall power
socket.
● Only use the LG-approved battery charger. Otherwise, you may
cause serious damage to your phone and risk of overheating,
fire or explosion may occur.
● Use the correct adapter for your phone when using the battery
pack charger abroad.
● Talking on your phone for a long period of time may reduce call
quality due to heat generated during use.
● Do not use harsh chemicals (such as alcohol, benzene, thinners,
etc.) or detergents to clean your phone. This could cause a fire.
Do not place or answer calls while charging the phone as it
may short-circuit the phone and/or cause electric shock or fire.
Don’t short-circuit the battery. Metallic articles such as a coin,
paperclip or pen in your pocket or bag may short-circuit the +
and – terminals of the battery (metal strips on the battery) upon
moving. Short-circuit of the terminal may damage the battery
and cause an explosion.
● Never use and unapproved battery since this could damage
the phone and/or battery and could cause the battery to
19
explode. Only use the batteries and chargers provided by LG.
The warranty will not be applied to products provided by other
suppliers. Only authorized personnel should service the phone
and its accessories. Faulty installation or service may result in
accidents and consequently invalidate the warranty.
paperclip or pen in your pocket or bag or contact with sharp
objects including animal bites may short-circuit the + and
– terminals of the battery (metal strips on the battery) upon
moving. Short-circuit of the terminal may damage the battery
and cause an explosion.
Explosion, Shock, and Fire Hazards
● Do not put your phone in a place subject to excessive dust and
keep the minimum required distance between the power cord
and heat sources.
● Unplug the power cord prior to cleaning your phone, and clean
the power plug pin when it’s dirty.
● When using the power plug, ensure that it’s firmly connected. If
not, it may cause excessive heat or fire.
● If you put your phone in a pocket or bag without covering the
receptacle of the phone (power plug pin), metallic articles (such
as a coin, paperclip or pen) may short-circuit the phone and
may cause an explosion. Always cover the receptacle when not
in use.
● Don’t short-circuit the battery. Metallic articles such as a coin,
20
General Notice
● Using a damaged battery or placing a battery in your mouth
or animal's mouth may cause serious injury including a fire or
explosion.
● Do not place items containing magnetic components such as a
credit card, phone card, bank book, or subway ticket near your
phone. The magnetism of the phone may damage the data
stored in the magnetic strip.
● Talking on your phone for a long period of time may reduce call
quality due to heat generated during use.
● When the phone is not used for a long period time, store it in a
safe place with the power cord unplugged.
● Using the phone in proximity to receiving equipment (i.e., TV or
radio) may cause interference to the phone.
● Do not use the phone if the antenna is damaged. If a damaged
antenna contacts skin, it may cause a slight burn. Please contact
an LG Authorized Service Center to replace the damaged
antenna.
● Do not immerse your phone in water, liquid, or expose to high
humidity. If this happens, turn it off immediately and remove
the battery. Immediately, take it to an LG Authorized Service
Center.
● Do not paint your phone.
● The data saved in your phone might be deleted due to careless
use, repair of the phone, or upgrade of the software. Please
backup your important phone numbers. (Ringtones, text
messages, voice messages, pictures, and videos could also be
deleted.) The manufacturer is not liable for damage due to the
loss of data.
● When you use the phone in public places, set the ringtone to
vibration so you don't disturb others.
● Do not turn your phone on or off when putting it to your ear.
● Use accessories, such as earphones and headsets, with caution.
Ensure that cables are tucked away safely and do not touch the
antenna unnecessarily.
FDA Consumer Update
The U.S. Food and Drug Administration’s Center for Devices and
Radiological Health Consumer Update on Mobile Phones:
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe. Wireless
phones emit low levels of Radio Frequency (RF) energy in the
microwave range while being used. They also emit very low
levels of RF when in standby mode. Whereas high levels of RF
can produce health effects (by heating tissue), exposure to low
level RF that does not produce heating effects causes no known
adverse health effects. Many studies of low level RF exposures have
not found any biological effects. Some studies have suggested
that some biological effects may occur, but such findings have
not been confirmed by additional research. In some cases, other
researchers have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
21
Loading...
+ 51 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.