LG Electronics USA 60PY3DFUJ Users Manual
EXTERNAL EQUIPMENT SETUP
21
When connecting HDMI to DVI cable
( )
COMPONENT IN
AV IN 1
REMOTE
CONTROL IN
ANTENNA/
CABLE IN
1
2
RS-232C IN
(CONTROL & SERVICE)
VIDEO
AUDIO
AUDIO OUT
OPTICAL COAXIAL
VIDEO
MONO
( )
AUDIO
S-VIDEO
HDMI/DVI IN
1
2
3
RGB IN
AUDIO
(RGB/DVI)
L R
DVI-DTV OUTPUT
RGB(PC)
DIGITAL AUDIO OUT
Connect the DVI output of the digital set-top box to the
HHDDMMII//DDVVII IINN11, 22
or
33
jack on the set.
Connect the audio output of the digital set-top box to the
AAUUDDIIOO((RRGGBB//DDVVII
))
jack on the set.
1. How to connect
■
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
)
■
Select
HHDDMMII11,HHDDMMII22 orHHDDMMII33
input source with using the
IINNPPUUTT
button on the remote control.
2. How to use
2
1
1
2
EXTERNAL EQUIPMENT SETUP
22
DVD SETUP
EXTERNAL EQUIPMENT SETUP
When connecting Component cable
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
YPBP
R
Video output ports
on DVD player
Y
Y
Y
Y
P
B
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
Connect the video outputs (Y, P
B, P
R
)
of the DVD to the
CCOOMMPPOONNEENNTT II NN VVII DD EEOO 11
jacks on the set.
Match the jack colors
(
Y = green, P
B = blue, and P
R = red
)
.
Connect the audio outputs of the DVD to the
CCOOMMPPOONNEENNTT II NN AAUU DD II OO11
jacks on the set.
1. How to connect
2. How to use
■
Turn on the DVD player, insert a DVD.
■
Select
CCoommppoonneenntt 11
input source by using the
IINNPP UUTT
button on the remote control.
■
If connected to
CCOOMM PPOONNEENNTT IINN 22
input, select
CCoommppoo nn eenntt 22
input source.
■
Refer to the DVD player's manual for operating instructions.
2
1
RGB IN
AUDIO
(RGB/DVI)
RGB(PC)
R
CO
R
(CONT
( )
S-
COMPONENT IN
1
2
VIDEO
AUDIO
Y L RPB PR
1 2
EXTERNAL EQUIPMENT SETUP
23
When connecting with an S-Video cable
Connect the S-VIDEO output of the DVD to the
SS -- VV II DDEEOO
input on the set.
Connect the audio outputs of the DVD to the
AAUUDDIIOO
input jacks on the set.
1. How to connect
2. How to use
■
Turn on the DVD player, insert a DVD.
■
Select
AAVV11
input source by using the
IINNPP UUTT
button on the
remote control.
■
If connected to
AAVV IINN22
, select
AAVV22
input source.
■
Refer to the DVD player's manual for operating instructions.
When connecting HDMI cable
Connect the HDMI output of the DVD to the
HHDDMMII//DDVVII IINN 11, 22
, or 33jack on the set.
No separated audio connection is necessary.
HDMI supports both audio and video.
1. How to connect
2. How to use
■
Select
HHDDMMII11,HHDDMMII22
,or
HHDDMMII33
input source by using
the
IINNPP UUTT
button on the remote control.
■
Refer to the DVD player's manual for operating instructions.
■
If the DVD does not support Auto HDMI, you need to set
the output resolution appropriately.
2
1
2
1
( )
B/DVI)
REMOTE
CONTROL IN
ANTENNA/
CABLE IN
RS-232C IN
(CONTROL & SERVICE)
AUDIO
AUDIO OUT
OPTICAL COAXIAL
MONO
( )
AUDIO
S-VIDEO
AV IN 1
VIDEO
L R
S-VIDEO
AUDIO
DIGITAL AUDIO OUT
1
2
RGB IN
COMPONENT IN
AUDIO
(RGB/DVI
RGB(PC)
1
2
VIDEO
A
( )
HDMI/DVI IN
1
2
3
HDMI-DVD OUTPUT
1
EXTERNAL EQUIPMENT SETUP
24
VCR SETUP
EXTERNAL EQUIPMENT SETUP
When connecting with an antenna
■
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
■
Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period
of time
(Only
Plasma TV model
)
. If the 4:3 picture format is used; the fixed images on the sides of the
screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon.
Connect the RF antenna out socket of the VCR to the
AANNTT EENNNNAA// CCAA BB LLEE IINN
socket on the set.
Connect the antenna cable to the RF antenna in socket of the VCR.
1. How to connect
■
Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
■
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.
)
2. How to use
2
1
L R
S-VIDEO VIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
AV IN 1
AUDIO
(RGB/DVI)
REMOTE
CONTROL IN
ANTENNA/
CABLE IN
RS-232C IN
(CONTROL & SERVICE)
AUDIO
AUDIO OUT
OPTICAL COAXIAL
VIDEO
MONO
( )
AUDIO
S-VIDEO
( )
DIGITAL AUDIO OUT
Wall Jack
Antenna
1
2
EXTERNAL EQUIPMENT SETUP
25
GG
Do not connect to both Video
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
only the S-Video will work.
CAUTION
When connecting with a RCA cable
GG
The picture quality is improved: compared to normal
composite (RCA cable) input.
NOTE
!
Connect the
AAUUDDIIOO/VVIIDDEEOO
jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)
1. How to connect
2. How to use
■
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.
)
■
Select
AAVV11
input source by using the
IINNPP UUTT
button on
the remote control.
■
If connected to
AAVV IINN22
, select
AAVV22
input source.
When connecting with an S-Video cable
Connect the S-VIDEO output of the VCR to the
SS -- VV II DDEEOO
input on the set.
Connect the audio outputs of the VCR to the
AAUUDDIIOO
input jacks on the set.
1. How to connect
2. How to use
■
Insert a video tape into the VCR and press PLAY on the VCR.
(
Refer to the VCR owner’s manual.
)
■
Select
AAVV11
input source by using the
IINNPP UUTT
button on the
remote control.
■
If connected to
AAVV IINN22
, select
AAVV22
input source.
1
2
1
GG
If you have a mono VCR, connect the audio cable from the VCR to the
AAUUDDIIOO
LL//MMOONN OO
jack of the set.
NOTE
!
REMOTE
CONTROL IN
ANTENNA/
CABLE IN
RS-232C IN
(CONTROL & SERVICE)
AUDIO
AUDIO OUT
OPTICAL COAXIAL
AV IN 1
VIDEO
MONO
( )
AUDIO
S-VIDEO
DIGITAL AUDIO OUT
L R
S-VIDEO VIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
1
( )
(
)
B/DVI)
REMOTE
CONTROL IN
ANTENNA/
CABLE IN
RS-232C IN
(CONTROL & SERVICE)
AUDIO
AUDIO OUT
OPTICAL COAXIAL
AV IN 1
VIDEO
MONO
( )
AUDIO
S-VIDEO
DIGITAL AUDIO OUT
L R
S-VIDEO VIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
1
2
EXTERNAL EQUIPMENT SETUP
26
OTHER A/V SOURCE SETUP
EXTERNAL EQUIPMENT SETUP
Camcorder
Video Game Set
Connect the
AAUUDDIIOO/VVIIDDEEOO
jacks
between TV and external equipment.
Match the jack colors
.
(
Video = yellow, Audio Left = white, and
Audio Right = red
)
1. How to connect
2. How to use
■
Select
AAVV22
input source by using the
IINNPP UUTT
button on the remote control.
■
If connected to
AAVV IINN11
input, select
AAVV11
input source.
■
Operate the corresponding external equipment.
1
1
USB IN
S-VIDEO
R
AUDIO
L/MONO
VIDEO
AV IN 2
VIDEO
L R
EXTERNAL EQUIPMENT SETUP
27
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting D-sub 15 pin cable
Connect the RGB output of the PC to the
RRGGBB
((
PP CC
))
jack on the set.
Connect the PC audio output to the
AAUUDDIIOO
((
RRGGBB//DDVV II
))
jack on the set.
1. How to connect
2. How to use
■
Turn on the PC and the TV.
■
Select
RRGGBB-- PPCC
input source by using the
IINNPP UUTT
button
on the remote control.
2
1
I/DVI IN
COMPONENT IN
CO
1
2
(CO
VIDEO
AUDIO
( )
RGB IN
AUDIO
(RGB/DVI)
RGB(PC)
RGB OUTPUT AUDIO
1
2
EXTERNAL EQUIPMENT SETUP
28
EXTERNAL EQUIPMENT SETUP
When connecting HDMI to DVI cable
Connect the DVI output of the PC to the
HHDDMMII//DDVVII IINN11, 22
or
33
jack on the set.
(Use the HDMI to DVI cable)
Connect the PC audio output to the
AAUUDDIIOO ((RRGGBB//DDVVII
))
jack on the set.
1. How to connect
2. How to use
■
Turn on the PC and the TV.
■
Select
HHDDMMII11,HHDDMMII22 orHHDDMMII33
input source by using the
IINNPP UUTT
button on the remote control.
2
1
( )
COMPONENT IN
AV IN 1
REMOTE
CONTROL IN
ANTENNA/
CABLE IN
1
2
RS-232C IN
(CONTROL & SERVICE)
VIDEO
AUDIO
AUDIO OUT
OPTICAL COAXIAL
VIDEO
MONO
( )
AUDIO
S-VIDEO
HDMI/DVI IN
1
2
3
RGB IN
AUDIO
(RGB/DVI)
L R
DVI-PC OUTPUT
RGB(PC)
DIGITAL AUDIO OUT
1
2
GG
If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.
GG
If the PC does not support Auto DVI, you need to set the output resolution appropriately.
NOTE
!
EXTERNAL EQUIPMENT SETUP
29
GG
To get the the best picture quality, adjust the PC
graphics card to 1920x1080, 60Hz.
GG
Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.
GG
Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is present, change the PC output to another resolution,
change the refresh rate to another rate or adjust
the brightness and contrast on the VIDEO menu
until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of the
PC graphic card.
GG
Avoid keeping a fixed image on the screen for a
long period of time. The fixed image may become
permanently imprinted on the screen.
GG
The synchronization input form for Horizontal and
Vertical frequencies is separate.
NOTES
!
Supported Display Specifications
RGB-PC, HDMI-PC
Horizontal Vertical
Frequency(KHz)Frequency(Hz
)
31.468 70.09
31.469 70.08
31.469 59.94
37.861 72.80
37.500 75.00
35.156 56.25
37.879 60.31
48.077 72.18
46.875 75.00
48.363 60.00
56.476 70.06
60.023 75.02
47.776 59.870
60.289 74.893
47.712 60.015
63.981 60.020
79.976 75.025
75.00 60.00
67.50 60.00
Resolution
720x400
1360x768
640x350
640x480
800x600
1024x768
1280x1024
1600x1200
1920x1080
1280x768
* RGB-PC mode only
EXTERNAL EQUIPMENT SETUP
30
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Overview
Press the
MMEENN UU
button and then use DDor EEbutton
to select the
PP II CCTTUURREE
menu.
Press the GGbutton and then use DDor EEbutton to
select
SS cc rreeeenn
.
Press the
GG
button to enter the screen adjustment
menu.
When the RGB input, of the set is connected to a PC
Output, Select RGB-PC with using the
IINNPPUUTT
button on the
remote control.
When you change the resolution, select the proper resolution
in present input to see the best picture appearance.
2
3
1
Picture Mode
Color Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
G
Selection ( Gor ) leads you to the
screen adjustment menu.
Picture Mode : User1
Color Temperature : Cool
XD
Advanced
Aspect Ratio : 16:9
Picture Reset
Screen
1
2 3
EXTERNAL EQUIPMENT SETUP
31
Use DDor EEbutton to select
RReessoolluuttiioonn, PPoossiittiioonn
,
SSiizzee
, or
PPhhaassee
.
Press the
EENNTTEERR
button and then use
DD EE
FF GG
button to make appropriate adjustments.
■
The
PPhhaassee
adjustment range is
--1166~++1166
.
■
The
SSiizzee
adjustment range is
--3300~++3300
.
Press the
EENNTTEERR
button.
Adjustment for screen Resolution, Position,
Size, and Phase
Use DDor EEbutton to select
RReesseett
or
AAuuttoo
.
Press the
EENNTTEERR
button and then use
FF
or GGbutton
to select
YYeess
.
Press the
EENNTTEERR
button.
Auto Configuration and Initializing (Reset
to original factory values)
2
3
1
2
3
1
2 31
2 31
Initialize Settings.
Yes No
Select
Prev
OK
FF GG
MENU
Resolution
Auto Config.
Position
Size
Phase
Reset
Resolution
Auto Config.
Position
Size
Phase
Reset
Select
Prev
Ok
DD
EE
MENU
1024 x 768
1280 x 768
1360 x 768
Resolution
Auto Config.
Position
Size
Phase
Reset
Auto config.
Yes
No
Select
Prev
OK
FF GG
MENU
AAuu ttoo CC oonnffiigg..
This function is to adjust picture
position and minimizes image shaking automatically.
RReessooll uu ttii oonn
XGA(1024, 1280, 1360) isn’t distinguished because of having the
same H/V Sync Time.
This function is you to select the
Default Sync Time.
PPoossiitt iioonn
This function is to adjust picture to
left/right and up/down as you prefer.
SSiizzee
This function is to minimize any vertical bars or stripes visible on the
screen background. And the horizontal screen size will also change.
PPhhaassee
This function allows you to remove
any horizontal noise and clear or
sharpen the image of characters.
RReesseett
This function is to initialize the
adjusted value.
EXTERNAL EQUIPMENT SETUP
32
USB IN SETUP
EXTERNAL EQUIPMENT SETUP
The TV has a special signal output capability which allows you to hook up the second TV or monitor.
AV IN 2
L/MONO
R
AUDIO
VIDEO
S-VIDEO
USB IN
Connect the USB device to the
UUSS BB IINN
(or
UUSSBB
) jack
on the side of TV.
1. How to connect
1
2. How to use
■
After connecting the
UUSS BB IINN
(or
UUSSBB
) jack, you use the
function. (
GG
pp..4466
)
MEDIAMEDIA
HOST HOST
1
or
EXTERNAL EQUIPMENT SETUP
33
AUDIO OUT SETUP
Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical)port.
GG
When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. (
GG
pp..6699
)
NOTE
!
GG
Do not look into the optical output port. Looking at the
laser beam may damage your vision.
GG
Block the SPDIF out(optical/coaxial) about the contents
with ACP(Audio Copy Protection) function.
CAUTION
Connect one end of the optical or coaxial cable to the TV’s
OOPPTTII CCAALL
or
CCOOAAXXIIAALL
port of
DDIIGGIITTAALL AAUUDDIIOO OOUUTT
.
Connect the other end of the optical or coaxial cable to the
digital audio input on the audio equipment.
Set the “TV Speaker option - Off ” in the AUDIO menu. (
GG
pp..6699
). See the external audio equipment instruction manual
for operation.
1. How to connect
2
3
1
Connect audio outputs to the TV’s
AAUUDDIIOO OOUUTT
jacks.
Set the “TV Speaker option - Off” in the AUDIO menu.
(
GG
pp..6699
). See the external audio equipment instruction
manual for operation.
1. How to connect
2
1
Analog
Digital
AV IN 1
REMOTE
CONTROL IN
ANTENNA/
CABLE IN
RS-232C IN
(CONTROL & SERVICE)
OPTICAL COAXIAL
VIDEO
MONO
( )
AUDIO
S-VIDEO
AUDIO OUT
DIGITAL AUDIO OUT
L R
AUDIO
1
( )
AV IN 1
DVI)
REMOTE
CONTROL IN
ANTENNA/
CABLE IN
RS-232C IN
(CONTROL & SERVICE)
AUDIO
AUDIO OUT
VIDEO
MONO
( )
AUDIO
S-VIDEO
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
1
2
WATCHING TV / CHANNEL CONTROL
34
REMOTE CONTROL FUNCTIONS
WATCHING TV / CHANNEL CONTROL
When using the remote control, aim it at the remote control sensor on the TV.
APM
CC
AUTO DEMO
M/C EJECT
TV INPUTTV INPUT
STBSTB
MENU
BRIG
HT +
B
RIGHT -
TIMER
RATIO
SIMPLINK
BACKBACK
TV INPUT
STB
BACK
TV INPUT
STB
BACK
PICTURE
SOUND
SAP
CC
MARK
USB EJECT
MEDIA HOSTMEDIA HOST
MEDIA HOST
MEDIA HOST
MODE
MENU
BRIGHT +/-
THUMBSTICK
(Up/Down/Left
Right/ENTER)
EXIT
TIMER
RATIO
SIMPLINK
VOLUME UP
/DOWN
MUTE
FAV
CHANNEL
UP/DOWN
— (DASH)
BACK
Select the remote operating mode: TV, DVD, VCR, AUDIO,
CABLE or STB. If the mode of another product is selected,
a button on the remote control which is not used for the
selected product can control the TV.
Enter to the mode.
Controls the mode.
Control video cassette recorders or DVD players.
Displays the main menu.
Adjust brightness on screen.
It turns to the default settings brightness by changing
mode source.
Navigate the on-screen menus and adjust the system settings to your preference.
Clear all on-screen displays and return to TV viewing from
any menu.
Select the amount of time before your TV turns off automatically.
GG
pp..8800
Change the aspect ratio.
GG
pp..5533
See a list of AV devices connected to TV.
When you toggle this button, the SimpLink menu appears
at the screen.
GG
pp..4422
Increase/decrease the sound level.
Switch the sound on or off.
GG
pp..3366
Scroll through the programmed Favorite channels.
GG
pp..4400
Select available channels.
Used to enter a program number for multiple program
channels such as 2-1, 2-2, etc.
Tune to the last channel viewed.
MEDIAMEDIA
HOST HOST
MEDIAMEDIA
HOST HOST
,
VCR/DVD
buttons
MEDIAMEDIAMEDIA
HOST HOST HOST
MEDIA
HOST
NUMBER button
MEDIAMEDIA
HOST HOST
MEDIA
HOST
HOST
MEDIA
WATCHING TV / CHANNEL CONTROL
35
TV INPUT
STB
BACK
PICTURE
SOUND
SAP
CC
MARK
USB EJECT
MEDIA HOST
Inside the Sliding Cover
PICTURE
SOUND
SAP
CC
MARK
USB EJECT
Adjust the factory preset picture depend on
the viewing environment.
GG
pp..5544
Select the appropriate type of sound for type
of program.
GG
pp..6666
Analog mode: Selects MTS sound (Mono,
Stereo, or a SAP)
GG
pp..7700
DTV mode: Changes the audio language.
Select the Caption On/Off.
GG
pp..7733
Enter the selected functions.
GG
pp..4488
Remove the USB device.
GG
pp..3322
Installing Batteries
■
Open the battery compartment cover on the back
side and install the batteries matching correct
polarity (+ with +, - with -).
■
Install two 1.5V AA batteries. Don’t mix old or
used batteries with new ones.
■
Close cover.
■
Use a remote control up to 7 meters distance and
30 degree (left/right) within the receiving unit
scope.
■
Dispose of used batteries in a recycle bin to preserve environment.
Remote control effective range
POWER
TV INPUT
INPUT
Turns your TV or any other programmed equipment on or off, depending on the mode.
In AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2 and HDMI3 input sources, screen returns
to the last TV channel.
External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGBPC, HDMI1, HDMI2, HDMI3 (Antenna, Cable, AV 1-2, Component 1-2, RGB-PC, HDMI1,
HDMI2, HDMI3 input sources are linked automatically, only if these are connected ).
PICTURE
MARK
SOUND
USB EJECT
SAP
BACK
CC
LIVE TV
INPUT
MODE
D
-
A
Y
Y
A
+
D
LIVE TV
INPUT
MODE
D
-
A
Y
Y
A
+
D
WATCHING TV / CHANNEL CONTROL
36
TURNING ON TV
WATCHING TV / CHANNEL CONTROL
NOTE
!
GG
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
■
In standby mode to turn TV on, press the ,
IINNPPUUTT,CCHH ((
DD
or
EE
))
button on the TV or press the
PPOOWWEERR, IINNPPUUTT, TTVV IINNPPUUTT, CCHH((
DD
or
EE
)), NNuummbbeerr ((00~99 ))
button on the remote control.
Select the viewing source by using the
TTVV IINNPPUUTT, IINNPPUUTT
button on the
remote control.
■
This TV is programmed to remember which power state it was last set
to, even if the power cord is out.
When finished using the TV, press the
PPOOWWEERR
button on the remote
control. The TV reverts to standby mode.
TV INPUTTV INPUT
INPUT
TV INPUT
STB
PICTUREPICTUREPICTURE
SOUNDSOUND
SAPSAP
CCCC
MARKMARK
USB EJECTUSB EJECT
BACKBACK
MEDIA HOST
1
2
3
TV INPUT
STB
T
I
M
E
R
RAT
I
O
SIMPLINK
BACKBACK
TV INPUT
STB
BACK
TV INPUT
STB
BACK
TV INPUT
STB
BACK
MEDIA HOST
MEDIA HOST
MEDIA HOST
MEDIA HOST
Press the
CCHH ((
DD
or
EE
))
or
NNUUMMBBEERR
buttons to select a channel number.
1
VOLUME ADJUSTMENT
CHANNEL SELECTION
Press the
VVOOLL ((
DD
or
EE
))
button to adjust the volume.
If you want to switch the sound off, press the
MMUUTTEE
button.
You can cancel the Mute function by pressing the
MMUUTTEE
or
VVOOLL ((
DD
or
EE
))
button.
TV INPUT
STB
T
I
M
E
R
RAT
I
O
S
IMPLINK
TV INPUT
STB
TV INPUT
STB
TV INPUT
STB
TV INPUT
MEDIA HOST
MEDIA HOST
MEDIA HOST
MEDIA HOST
Adjust the volume to suit your personal preference.
1
2
3
WATCHING TV / CHANNEL CONTROL
37
ON-SCREEN MENUS SELECTION
Press the
MMEENNUU
button and then use DDor EEbutton to select the each menu.
Press the
GG
button and then use
DD EE FF GG
button to display the available menus.
Your TV's OSD (On Screen Display)may differ slightly from what is shown in this manual.
2
1
SETUP
PICTURE
TIME
Auto Tuning
Manual Tuning
Channel Edit
AUDIO
Picture Mode : User1
Color Temperature : Cool
XD
Advanced
Aspect Ratio : 16:9
Picture Reset
Screen
Sound Mode : Standard
Auto Volume : On
Balance : 0
TV Speaker : On
Clock :
Oct 19, 2006, 03:44 AM
Off Time : Off
On Time : Off
Sleep Time : Off
Auto Sleep : Off
Language :
English
Input Label
SimpLink : Off
Key Lock : Off
Caption : Off
ISM Method : Orbiter
Low Power : Off
Front Display : Bright
Set ID : 1
Lock System : Off
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Input Block
OPTION
LOCK
Lock System : Off
Set Password
Block Channel
TV Rating-English
TV Rating-French
Input Block
For USA
For Canada
Only Plasma TV model
WATCHING TV / CHANNEL CONTROL
38
CHANNEL SETUP
WATCHING TV / CHANNEL CONTROL
Press the
MMEENN UU
button and then use DDor EEbutton
to select the
SS EETTUUPP
menu.
Press the GGbutton and then use DDor EEbutton to
select
AAuu ttoo TTuunn iinngg
.
Press the
EENNTTEERR
button to begin the channel search.
Allow
AAuu ttoo TTuunn iinngg
to complete the channel search
cycle for
AANNTT EENNNNAA
and
CCAABB LLEE
.
Automatically finds all channels available through antenna
or cable inputs, and stores them in memory on the channel
list.
Run Auto Tuning again after any Antenna/Cable connection
changes.
A password is required to gain access to Auto Tuning menu
if the Lock System is turned on.
2
3
1
TV INPUTTV INPUT
STBSTB
BRIG
HT +
BRI
G
H
T
-
T
I
M
E
R
R
A
T
I
O
S
IMPLINK
M
E
N
U
TV INPUT
STB
TV INPUT
STB
TV INPUT
STB
TV INPUT
STB
MEDIA HOSTMEDIA HOST
MEDIA HOST
MEDIA HOST
MEDIA HOST
MEDIA HOST
Auto Scan (Auto Tuning)
Auto Tuning
G
Manual Tuning
Channel Edit
Selection ( Gor ) leads you to
the Auto Tuning screen.
Auto Tuning
Manual Tuning
Channel Edit
Selection ( Gor ) leads
you to the Auto Tuning
screen.
NOTE
!
Analog TV antenna
Digital DTV antenna
Analog CATV cable
Digital CADTV cable
Processing Auto Tuning...
DTV Ch.23
Found Channel(s): 16
Press to stop the current
scan and start ANALOG
ANTENNA channel scan.
MENU Prev
Next
Auto Tuning
Manual Tuning
Channel Edit
1
2
3
WATCHING TV / CHANNEL CONTROL
39
A password is required to gain access to Manual Tuning
menu if the Lock System is turned on.
If selecting DTV or CADTV input signal, you can view the
on-screen signal strength monitor to see the quality of the
signal being received.
Press the
MMEENN UU
button and then use
DD
or EEbutton
to select the
SSEETTUUPP
menu.
Press the
GG
button and then use DDor EEbutton to
select
MMaannuuaall TTuunniinngg
.
Press the
GG
button and then use DDor EEbutton to
select
TTVV, DDTTVV, CC AA TT VV
, and
CCAADD TTVV
.
Press the GGbutton and then use DDor EEbutton to
select channel you want to add or delete.
Press the
EENNTTEERR
button to add or delete the channel.
Press
EEXXIITT
button to return to TV viewing or press
MMEENNUU
button to return to the previous menu.
TV INPUTTV INPUT
STBSTB
BRIGHT +
BRI
G
H
T
-
T
I
M
E
R
R
A
T
I
O
S
I
M
P
LINK
M
E
N
U
TV INPUT
STB
TV INPUT
STB
TV INPUT
STB
TV INPUT
STB
MEDIA HOSTMEDIA HOST
MEDIA HOST
MEDIA HOST
MEDIA HOST
MEDIA HOST
2
1
4
3
6
5
NOTE
!
GG
This digital channel number is a physical channel
number, which is different from the normal channel
number shown in Channel Edit.
Add/Delete Channel (Manual Tuning)
Auto Tuning
Manual Tuning
G
Channel Edit
Select channel type and
RF-channel number.
DTV 2
Auto Tuning
Manual Tuning
Channel Edit
Select channel type and
RF-channel number.
DTV
GG
12
Press to delete the channel.
DTV 12-0
DD
EE
Bad Normal Good
Auto Tuning
Manual Tuning
Channel Edit
1
2
3 4 5
WATCHING TV / CHANNEL CONTROL
40
WATCHING TV / CHANNEL CONTROL
From the default channel list created from the Auto Tuning
channel search, you can create two different types of channel lists in memory: “custom list” and “favorite channel list”.
A custom list can be created by toggling each channel on or
off with ENTER button. The channels in the Custom List are
displayed in black and the channels deleted from the
Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the
small window at the top-left corner of the screen.
You can create your own Favorite List. Use the
FFAAVV
button
on the remote control when a channel is highlighted and
then add or delete the channel to/from your Favorite List.
Press the
MMEENNUU
button and then use
DD
or EEbutton
to select the
SSEETTUUPP
menu.
Press the
GG
button and then use DDor EEbutton to
select
CChhaannnneell EEddiitt
.
Press the
GG
button. You will now see a screen filled
with channel numbers and a preview picture.
Use
DD EE FF GG
button to select a channel and then
use the
EENNTTEERR
button to add or delete it. Press
FFAAVV
button to add the channel to the Favorite List. The
surfing icon will appear in front of that channel number.
Press
EEXXIITT
button to return to TV viewing or press
MMEENNUU
button to return to the previous menu.
TV INPUT
STBSTB
BRIG
HT +
BRI
G
H
T
-
T
I
M
E
R
R
A
T
I
O
S
I
M
P
LINK
M
E
N
U
TV INPUT
STB
TV INPUT
STB
TV INPUT
STB
TV INPUT
STB
MEDIA HOSTMEDIA HOST
MEDIA HOST
MEDIA HOST
MEDIA HOST
MEDIA HO
ST
2
1
4
3
5
Channel Editing
Auto Tuning
Manual Tuning
Channel Edit
G
Selection (Gor ) leads you to the
channel edit screen.
Auto Tuning
Manual Tuning
Channel Edit
1
2
3 4
WATCHING TV / CHANNEL CONTROL
41
INPUT LIST
Press the
IINNPPUUTT
button to display external device that is
connected to the unit, on screen.
Press the
EE NNTT EERR
button to change the input to the active
external device. Use the
DD
or EEbutton to select the input
source.
TV INPUT
STBSTB
M
E
N
U
BRI
GH
T +
B
RIG
H
T
-
T
I
M
E
R
RAT
I
O
S
I
MPLINK
INPUT
MEDIA HOSTMEDIA HOST
AAnntteennnnaa
: Select it when watching the DTV/TV.
CCaabbllee
: Select it when watching the CADTV/CATV.
AAVV 11,, AAVV 22
: Select it when watching the VCR or external equipment.
CCoommppoonneenntt 11--22
: Select it when using the DVD or the Digital set-top box depend on connector.
RRGGBB--PPCC
: Select it when using PC depend on connector.
HHDDMMII,, HHDDMMII22,, HHDDMMII33
: Select it when using DVD, PC or Digital set-top box depend on connector.
Antenna
Cable
AV 1
AV 2
Component1
EE
Input List
AV 2
AAnntteennnnaa CCaabbllee
If all external input sources are connected:
If no external input sources are not connected:
If there is any external input source connected:
(ex: When connected only to AV 2)
AAnntteennnnaa CCaabbllee
AAVV11
AAnntteennnnaa CCaabbllee AAVV22
AAVV22 CCoommppoonneenntt11
HHDDMMII22 HHDDMMII11 RRGGBB--PPCC CCoommppoonneenntt22
2
3
1
HHDDMMII33
WATCHING TV / CHANNEL CONTROL
42
WATCHING TV / CHANNEL CONTROL
This operates only for the devices with the logo.
Please check the logo.
This allows you to control and play other AV devices
connected to the display through HDMI cable without
additional cables and settings.
TV INPUTTV INPUT
STBSTB
M
E
N
U
BRIGHT
+
B
RIG
HT
-
T
I
M
E
R
RAT
I
O
SIMP
LINK
MEDIA HOSTMEDIA HOST
TV INPUT
STB
MEDIA HOST
M
E
N
U
Connect the HDMI/DVI IN 1, 2 or 3 terminal of the TV
to the rear terminal (HDMI output) of the Simplink
device with the HDMI cable.
After connecting the HDMI jack for the home theater
with simplink function in the above method, connect
the DIGITAL AUDIO OUT OPTICAL on the back of the
TV to the DIGITAL AUDIO IN terminal on the back of
the simplink device with the Optical cable.
Press the
MMEENN UU
button and then use
DD
or EEbutton
to select the
OO PPTTIIOONN
menu.
Press theGGbutton and then use DDor EEbutton to
select
SS iimmppLL iinn kk
.
Press the
GG
button and then useDDor EEbutton to
select
OOnn
.
Press
EEXXIITT
button to return to TV viewing or press
MMEENNUU
button to return to the previous menu.
NOTE
!
GG
When operating the external device with SimpLink, press the TV button among the MODE button on the
remote control.
GG
When you switch the Input source with the INPUT button on the remote control, you can stop the opera-
tion of device worked by SimpLink.
GG
When you select or operate the media device with home theater function, the speaker automatically switch-
es to home theater speaker (HT speaker).
GG
When you execute ‘Photo List, Music List ’function during DVD playback included in home theater sup-
ported the SimpLink stops and the applicable function is executed after switching the input to TV.
SimpLink Preparations
2
3
4
5
1
2
3 4
Language : English
Input label
SimpLink : Off
Key Lock : Off
Caption : Off
ISM Method : Orbiter
Low Power : Off
Front Display : Bright
Set ID : 1
Language
Input Label
SimpLink
G
Key Lock
Caption
ISM Method
Low Power
Front Display
Set ID
Off
On
WATCHING TV / CHANNEL CONTROL
43
TV INPUTTV INPUT
STBSTB
M
E
N
U
BR
I
G
H
T +
B
RIG
HT
-
T
I
M
E
R
R
A
T
I
O
S
I
MPLINK
MEDIA HOSTMEDIA HOST
SIMPL
INK
SIMPL
INK
■
DDiirreecctt PPllaayy::
After connecting AV devices to TV, you can directly control the
devices and play media without additional settings.
■
SS eell eecctt AAVV ddeevviiccee::
Enables you to select one of AV devices connected to TV and
play it.
■
DDiisscc ppllaa yybbaacckk ::
Control connected AV devices by pressing the
,,
,, , ,
,
DD EE
FF GG
,
EENN TTEERR
buttons and buttons for play, stop, pause,
fast reverse, fast forward, chapter skip.
■
PPoowweerr ooffff aallll ddeevviicceess::
When you power off TV, all connected devices are turned off.
■
SS wwiittcchh aauuddiioo--oo uu tt::
Offers an easy way to switch audio-out.
(A device, which is connected to TV through HDMI cable but does not support
SimpLink, does not provide this function)
SimpLink Menu
TTVV vviieewwiinngg
: Switch to the previous TV
channel regardless of the current mode.
DDIISS CC ppllaayybbaacckk
: Select and play discs.
When multiple discs are available, the titles
of discs are conveniently displayed at the
bottom of the screen.
VVCCRR ppllaa yybb aacc kk
: Play and control the con-
nected VCR.
HHDDDD RReeccoorrddiinnggss ppll aayybbaacckk
: Play and
control recordings stored in HDD.
AAuu ddiioo OOuu tt ttoo HH TT ssppeeaakkeerr//AAuuddiioo
OOuutt ttoo TTVV
: Select HT speaker or TV
speaker for Audio Out.
SimpLink Functions
1
2
3
4
5
GG
Selected Device
GG
When no device is connected
(displayed in gray)
GG
When a device is connected
(displayed in bright color)
1
2
3
4
5
After selecting the
TTVV
button of the MODE on the remote control,
press the
SS II MMPP LLIINNKK
button.
Use
DD EE FF GG
button to select the desired device and then press
the
EENNTTEERR
button.
Control connected AV devices by pressing the
, , ,
,,,
,
DDEE
FF GG
,
EENNTTEERR
buttons.
2
1
3
21 3
WATCHING TV / CHANNEL CONTROL
44
INPUT LABEL
WATCHING TV / CHANNEL CONTROL
Sets a label to each input source which is not in use when
you press the INPUT button.
Press the
MMEENNUU
button and then use
DD
or EEbutton to
select the
OOPPTTIIOONN
menu.
Press the
GG
button and then useDDor EEbutton to
select
IInnppuutt LLaabbeell
.
Press the
GG
button and then useDDor EEbutton to
select the source: AV1, AV2, Component1,
Component2, RGB-PC, HDMI1, HDMI2 or HDMI3.
Press the
FF
or GGbutton to select the label.
Press
EEXXIITT
button to return to TV viewing or press
MMEENNUU
button to return to the previous menu.
2
3
4
5
1
TV INPUTTV INPUT
STBSTB
BR
IGHT +
BRI
G
H
T
-
T
I
M
E
R
R
A
T
I
O
S
I
M
P
LINK
M
E
N
U
TV INPUT
STB
TV INPUT
STB
TV INPUT
STB
TV INPUT
STB
MEDIA HOSTMEDIA HOST
MEDIA HOST
MEDIA HOST
MEDIA HOST
MEDIA HOST
Language
Input label
G
SimpLink
Key Lock
Caption
ISM Method
Low Power
Front Display
Set ID
AV1 Cable Box
AV2 VCR
Component1 DVD
Component2 Set Top Box
RGB-PC VCR
HDMI1 Game
HDMI2 Satellite
HDMI3 Cable Box
Language : English
Input label
SimpLink : Off
Key Lock : Off
Caption : Off
ISM Method : Orbiter
Low Power : Off
Front Display : Bright
Set ID : 1
1
2 3 4
WATCHING TV / CHANNEL CONTROL
45
KEY LOCK
The TV can be set up so that it can only be used with the
remote control.
This feature can be used to prevent unauthorized viewing by
locking out the front panel controls.
This TV is programmed to remember which option it was
last set to even if you turn the TV off.
Press the
MMEENNUU
button and then use
DD
or EEbutton to
select the
OOPPTTIIOONN
menu.
Press the
GG
button and then useDDor EEbutton to
select
KKeeyy LLoocckk
.
Press the
GG
button and then useDDor EEbutton to
select
OOnn
or
OOffff
.
Press
EEXXIITT
button to return to TV viewing or press
MMEENNUU
button to return to the previous menu.
2
3
4
1
TV INPUTTV INPUT
STBSTB
BR
IGHT +
BRI
G
H
T
-
T
I
M
E
R
R
A
T
I
O
S
I
M
P
LINK
M
E
N
U
TV INPUT
STB
TV INPUT
STB
TV INPUT
STB
TV INPUT
STB
MEDIA HOSTMEDIA HOST
MEDIA HOST
MEDIA HOST
MEDIA HOST
MEDIA HOST
Language : English
Input label
SimpLink : Off
Key Lock : Off
Caption : Off
ISM Method : Orbiter
Low Power : Off
Front Display : Bright
Set ID : 1
1
2 3
Language
Input Label
SimpLink
Key Lock
G
Caption
ISM Method
Low Power
Front Display
Set ID
Off
On
ENTRY MODES
MEDIA HOST
46
MEDIAMEDIA
HOST HOST
MEDIAMEDIAMEDIA
HOST HOST HOST
MEDIA
HOST
When you connect a USB device or press the button, this screen is
displayed, automatically.
In USB device, you can not add a new folder or delete the existing folder.
MEDIA HOST
Press the
DD
or EEbutton to select the desired item.
Press the
EENNTTEERR
button to move to
PPhhoottoo LLiisstt orMMuussiicc LLiisstt
of
USB device.
Press the
UUSSBB EEJJEECCTT
button of remote control before removing
the USB device.
1
2
NOTE
!
3
BACK
PICTUREPICTURE
SOUNDSOUND
SAPSAP
MARKMARK
USB EJECTUSB EJECT
CCCC
Media Host Menu
GG
Press the
UUSSBB EEJJEECCTT
button of remote control
before removing the USB device.
GG
Only a USB storage device is recognizable.
GG
If the USB storage device is connected through a
USB hub, the device is not recognizable.
GG
A USB storage device using an automatic recogni-
tion program may not be recognized.
GG
A USB storage device which uses its own driver
may not be recognized.
GG
In case of a card reader, up to four memory cards
are concurrently recognizable.
GG
The recognition speed of a USB storage device
may depend on each device.
GG
Please do not turn off the TV or unplug the USB
device when the connected USB storage device is
working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. To unplug the USB
storage device, please press the
UUSSBB EEJJEECCTT
button on the remote control, and then unplug it
safely.
GG
Please do not connect the USB storage device
which was artificially maneuvered on the PC. The
device may cause the product to malfunction or
fail to be played. Never forget to use only a USB
storage device which has normal music files or
image files.
GG
Please use only a USB storage device which was
formatted as a FAT or a NTFS file system provided
with the Windows operating system. In case of a
storage device formatted as a different utility program which is not supported by Windows, it may
not be recognized.
GG
In case of a hard disk drive (HDD) formatted as
NTFS, writing and deletion are not allowable.
GG
Please connect power to a USB storage device
which requires an external power supply. If not,
the device may not be recognized.
GG
Please connect a USB storage device with cable is
offered by USB maker. If connected with cable is
not offered by USB maker or an excessively long
cable, the device may not be recognized.
GG
Some USB storage devices may not be supported
or operated smoothly.
GG
If the name of a folder or file is too long, it will not
be displayed or recognized.
1 2
3
Loading...