LG Electronics USA 60PS80UA User Manual

WATCHING TV / CHANNEL CONTROL

61

SIMPLE MANUAL

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

E

You can easily and effectively access the TV information by viewing a simple manual on the TV.
During the Simple Manual operation, audio will be muted.

Select

OPTION

.

Select

Simple Manual

.

1

MENU

2

ENTER

Select the part of the manual
you want to see.

3

ENTER

4

RETURN

Return to TV viewing.

WATCHING TV / CHANNEL CONTROL

62

INPUT LIST

WATCHING TV / CHANNEL CONTROL

TV AV1 AV2

HDMI4 HDMI3 HDMI2 HDMI1

Component1 Component2

RGB-PC

Select the desired input source.

■

You can also select the desired input source in the

INPUT

menu.

1

INPUT

ENTER

TV AV1 AV2 Component1 Component2

TV AV1 AV2 Component1 Component2

Input Label

Exit

Select a desired input source (except

T V

).

Then, you can select your desired

Inpu t

Labe l

with using Blue button.

G

p.63

ie)

ie) In case of changing the input label using Blue button

Only these input signals which are connected to a TV can be activated and selected.

■

T V

: Select it to watch over-the-air, cable and digi-

tal cable broadcasts.

■

A V

: Select them to watch a VCR or other external

equipment.

■

Component

: Select them to watch DVD or a

Digital set-top box.

■

RGB-PC

: Select it to view PC input.

■

HD M I

: Select them to watch high definition

devices.

VCR Game DVD Set Top Box

■

When new external device is connected, this popup menu is
displayed automatically.

If selecting

Yes

, you can select input source that you want to

appreciate.

■

But, when selecting “

SIMPLI N K- O n

”, popup menu for HDMI

input will not be displayed.

No

Ye s

!

New external input is connected.
Do you want to use this?

AV2

Disconnected inputs are inactive (grayed out)

WATCHING TV / CHANNEL CONTROL

63

INPUT LABEL

You can set a label for each input source when it's not in use.

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Select

OPTION

.

Select

Input Label

.

Select the label.

1

MENU

2

ENTER

Select the source.

3

ENTER

4

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

With using OPTION menu

Select the source.

Select the label.

1

INPUT

2

3

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

With using INPUT button

AV1

AV2

Component1

Component2

RGB-PC

HDMI1

HDMI2

HDMI3

HDMI4

F G

Close

E

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

E

BLUE

WATCHING TV / CHANNEL CONTROL

64

AV MODE

WATCHING TV / CHANNEL CONTROL

AV Mode toggles through preset Video and Audio settings.

1

AV MODE

2

Off

Cinema or Cinema

Game Sport

Press the

AV MODE

button repeatedly to

select the desired source.

ENTER

■

If you select “

Cinema / Cinema

”

in AV mode,

Cinema

will be selected
both for “PICTURE menu - Picture
Mode” and “AUDIO menu - Sound
Mode” respectively.

■

If you select “

Of f

” in AV mode, the

“

Picture Mode

” and “

Sound Mo d e

”

return to previous selected value.

■

Of f

: Disables the AV MODE.

■

Cinema

: Optimizes video and audio for

watching movies.

■

Sport

: Optimizes video and audio for

watching sports events.

■

Game

: Optimizes video and audio for

playing games.

WATCHING TV / CHANNEL CONTROL

65

KEY LOCK

The TV can be set up so that it can only be used with the remote control.
This feature can be used to prevent unauthorized viewing by locking out the front panel controls.
This TV is programmed to remember which option it was last set to even if you turn the TV off.

Select

OPTION

.

Select

Key Lock

.

1

MENU

2

ENTER

Select

O n

or

Of f

.

3

ENTER

■

In

Key L o c k‘O n

’, if the TV is turned off,

press the

r

r

/ I, INPUT, CH

(

DE

or

)

button on the TV or POWER, INPUT,

CH

( )

or NUMBER buttons on the

remote control.

■

With the

Key Lock On

, the display

‘

Key Lock

’ appears on the screen if
any button on the front panel is pressed
while viewing the TV.

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

!

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

E

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

E

Off

On

WATCHING TV / CHANNEL CONTROL

66

WATCHING TV / CHANNEL CONTROL

SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional
cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the

logo are fully supported.

SIMPLINK can be turned on and off in the user menus.

Enter

Move

OPTION

Select

OPTION

.

Select

SIMPLINK

.

Select

On orOf f

.

Enter

Move

OPTION

E

1

MENU

3

2

ENTER

ENTER

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Off

On

NOTE

!

G

Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the
SIMPLINK device with the HDMI cable.

G

When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device
will stop.

G

When you select a device with home theater functionality, the sound output automatically switches to
the home theater speakers and the TV speakers are turned off.

G

If a connected SIMPLINK home theater system doesn't play the audio from the TV, connect the DIGITAL
AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIM­PLINK device with an OPTICAL cable.

E

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

WATCHING TV / CHANNEL CONTROL

67

SIMPLINK Menu

TV viewi n g

: Switch to the previous TV

channel regardless of the current mode.

DISC playb a ck

: Select and play discs.
When multiple discs are available, the titles
of discs are conveniently displayed at the
bottom of the screen.

VCR p l ayback

: Control the connected

VCR.

HDD Reco r dings p l ayback

: Control

recordings stored in HDD.

Audi o Out to Hom e Thea ter s peak­er/

Audi o Out to TV

: Select Home
Theater speaker or TV speaker for Audio
Out.

SIMPLINK Functions

1

2

3

4

5

G

When no device is connected

(displayed in gray)

G

Selected Device

G

When a device is connected
(displayed in bright color)

1

2

3

4

5

Display

SIMPLINK

menu.

Select the desired device.

Control connected AV devices.

1

3

2

ENTER

ENTER

■

Direc t Play :

After connecting AV devices to the TV, you can directly control the devices and play media with-

out additional settings.

■

Sele c t A V d evice:

Enables you to select one of the AV devices connected to TV.

■

Dis c playbac k:

Control connected AV devices by pressing the ,

ENTER, G, A,

l l

, FFand GGbuttons.

■

Power off all devices:

When you power off the TV, all connected devices are turned off.

■

Swit c h a udio-ou t :

Offers an easy way to switch audio-out.

■

Sync Powe r on:

When the equipment with Simplink function connected HDMI terminal starts to play, The TV

will change automatically to turn on mode.

(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide
this function)

Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer
Electronics Control).

NETWORK SETTING

NETWORK

68

NETWORK

Select

NETWORK

.

Select

Networ k Sett i n g

.

Select

Auto Resett i n g

or

Manual Reset t i ng

.

1

MENU

3

2

ENTER

ENTER

Input the setting value.

4

ENTER

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

NETWORK

Network Setting

Software Update

ESN

Enter

Move

NETWORK

Network Setting

Software Update

ESN

Address Type : Manual Set

IP Address : 192.168.0.10

Subnet Mask : 255.255.255.0

Gateway : 192.168.0.1

DNS Server : 156.147.135.180

Manual Resetting

Auto Resetting

Close

IP Address

GG

192 168 0 10

Subnet Mask

255 255 255 0

Gateway

192 168 0 1

DNS Server

156 147 135 180

Close

Manual Resetting

If there is a DHCP server on the local area network (LAN), the TV will automatically be allocated an IP address.
If you’re using a broadband router orbroadband modem that has a DHCP (Dynamic Host Configuration
Protocol) server function, select

Auto Resett i n g

. The IP address will automatically be determined.

If there is no DHCP server on the network and you want to set the IP address manually, select

Manual

Resetting

.

For detail information, contact your internet provider.

SOFTWARE UPDATE

NETWORK

69

You can update the TV using the latest software to enhance the products operation and/or add new features.
You can update the software by connecting the unit directly to the software update server.

The Software Update function may not work properly depending on your internet environment. In this case,
you can obtain the latest software from the authorized LG Electronics Service Center then update your player.

Select

NETWORK

.

Select

Softwa r e Upd a t e

.

1

MENU

2

ENTER

■

Before updating the software, remove
USB Device from the TV.

■

Before updating the software, turn the
TV off and then turn it on again.

■

During the software update procedure,
do not turn off the TV or disconnect AC
power, or do not press any button.

■

If you cancel the update, turn off the TV
and turn it on for stable performance.

■

This TV cannot be updated to previous
software version.

■

After software update, you can confirm
the update software version in ??/ menu.

3

ENTER

Start update version checking.
If newer version exists, start update.

Enter

Move

NETWORK

Network Setting

Software Update

ESN

Software : Checking...

Netflix : Checking...

Yahoo! : Checking...

Update

Cancel

Checking for update version...

Software : None

Netflix : None

Yahoo! : None

Update

Cancel

No update version is found.

Software : 03.00.01

Netflix : 03.02.03

Yahoo! : 03.02.02

Update

Cancel

Update version is found.

If newer version existsIf there is no update available

NETFLIX ESN (ELECTRONIC SERIAL NUMBER)

NETWORK

70

NETWORK

Select

NETWORK

.

Select

ESN

.

The serial number will appear.

1

MENU

2

ENTER

3

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

NETWORK

Network Setting

Software Update

ESN

Enter

Move

NETWORK

Network Setting

Software Update

ESN

We provide you the Netflix ESN (Electronic Serial Number) that allows you to rent and purchase videos using
the Netflix website.

For more information, please visit: www.netflix.com

Close

ESN Number : LGE-42LH500003000005A18E

i.e)

NETFLIX

NETWORK

71

The TV with Netflix® straming capabilities lets you instantly access a library of over 12000 video titles right
on our HDTV. It’s simple. With high-speed internet access and a Netflix® subscription, you have your choice
of any Netflix® “Watch Instantly” title to view to home in a matter of seconds.

T

o become a Netflix member visit: www.ne

tflix.com/LG

Activating your TV establishes a connection between your TV and your Netflix account. You must activate
your TV before you can use it to watch movies streamed over the INTERNET from Netflix.

no - start my FREE trial

yes-activate instant streaming from Netflix

Select

NETWORK

.

Select

NETFLIX

.

1

MENU

2

ENTER

Select

yes- a ctivate ins tant

stre a ming from Net f lix

if you

have an existing account.

3

ENTER

Select

I'm now a membe r

.

4

ENTER

On your computer, visit
www. n etflix. com/act i vate

.

Wait for the activation screen to appear on your TV
screen. You are now ready to complete activation on
the Netflix website.

If necessary, enter your

Sign in Name

and

Passwo r d

to log into your account.

5

Enter the activation code that appears on your TV
screen.

6

When the “Congratulations” screen appears on your
TV, you’re ready to add movies to your instant
Queue. See

Fill i ng you r insta nt Queu e

for

instruction.

7

■

"no-start my FREE trial" : If you have no an
account, visit http://www.netflix.com/LG on
your computer.

Netflix Deactivation

G

To deactivates the TV, press the BLUE button
on the remote control.

Activating TV

NETWORK

72

NETWORK

After you activate your player, you’re ready to add movies & TV episodes to your instant Queue. You can
then use your player’s remote to browse your instant Queue and to select and watch titles on your TV. You
will be amazed at how quick and easy it is.

Your instant Queue works just like your DVD Queue. Add and manage the movies & TV episodes in your instant
Queue from the Netflix website on your computer. Your instant Queue also appears on your TV via your player, so
your selections are available to watch anytime.

1

Visit the Netflix website on your computer:
http : //www.n e tflix.c o m

If necessary, enter your Sign in Name and Password to log into
your account.

2

Click

Watc h I n stantly

.

3

When you find a movie or TV episode you want to
watch, mouse over the

Add/Pl a y

button to reveal

additional options, and then click

Add to ins t a nt

Queue

.

■

To rearrange your instant Queue, drag and drop
the titles in the order you want them, or change
the numbers to the left of the titles and then
click

Up d a te In s t an t Q u e ue

to your

changes.

■

To remove a title from your instant Queue, click
the

Remove

check box to the right of the title

and then click

Updat e In stant Queue

to

your changes.

4

Repeat step 4 to add more movies & TV episodes to
your instant Queue.

5

(Optional) Arrange your instant Queue by clicking
the

Instant

subtab.

Watching instant by Netflix

NETWORK

73

Instant Queue

Current movie/Total movie

Unselected movie

Selected movie

Selected movie name

Running time

Parental rating

1

2

3

4

6

7

5

The Springboard Screen Components

Instant Queue

Current movie/Total movie

Selected movie name

Resume playing

Preview selection

Evaluation

Remove from queue

Title box

Actor or Actress name

Synopsis

Running time

Making year

Parental rating

Director

Movie type

1

2

3

4

6

7

8

9

10

11

12

13

14

15

5

1

3

2

5

13

8

9

10

11
12

14

15

6

7

4

It shows a synopsis and other details about the title, and lists actions that can be taken on it (including resuming
playback, rating the title, and selecting a different episode if the title has episodes).

It shows “box art” (title-specific DVD cover or movie poster images) for each of the movie in the member’s instant
queue and allows navigation through that queue using the remote control. The instant queue is a list of movies and
TV shows selected previously by the member on the Netflix web site.

1 2

3

4

5

6 7

The Poster Screen Components

NETWORK

74

NETWORK

After you set up your player and add movies & TV episodes, you can browse and watch them on your TV.

3

9

Return to your instant Queue.

8

Show springboard screen for selected title
(See previous page).

■

play

: Starts playing the selected title.

■

resu m e playin g

: Plays a previously paused
title from the scene where you paused it. This
option is available only if you begin watching a
title and then pause it.

■

play from beg i nning

: Starts playing from the

beginning of the selected title.

■

choo s e a di f ferent epi s ode

(TV series
only): Enables you to select a specific show of a
TV series. Press b / B to highlight the show you
want to view, and then press ENTER to choose
it.

■

rate

: Enables you to rate a movie or show. The
more stars, the higher the rating. Press ENTER
to access the rating feature, and then press b /
B to increase or decrease the rating. Press
ENTER again to confirm the selected rating.

■

remove

: Deletes the selected movie from your

instant Queue.

■

remo v e s e ries

(TV series only): Deletes the

selected TV series from your instant Queue.

Move to previous or next movie on your
instant Queue.

5

Play back the highlighted title.

6

ENTER

View details for the highlighted title.

7

Choose any of the menu items

4

Move to the previous or next page.
The selected movie shows the title,
rating and total time.

2

ENTER

ENTER

Select

NETFLIX

.

The instant Queue screen will
appear.

Select

NETWORK

.

1

MENU

Selecting a movie to watch on your TV

NETWORK

75

While watching a movie or TV episode from Netflix via your TV, you have full control over your viewing experience.
You can use the buttons on the remote to pause and resume viewing and to scan forward and backward, just like
when you watch a DVD. While playing a movie, the buttons on the remote do the following:

NOTE

!

G

Even if you use a high-resolution setup, audio/video quality may be compromised based on the speed of
your broadband internet connection.

G

Your Internet Service Provider (ISP) determines your broadband speed. We recommend a minimum con­nection speed of 1.5 Mbps. For the best quality picture, a connection speed of 4.0 Mbps is required.

G

Sometimes your broadband speed varies based on your ISP’s network conditions. Contact your ISP if you
have problems maintaining a fast connection that is reliable, or if you want to increase your connection
speed. Many ISPs offer a variety of broadband speed options.

Button Operation

Starts playing back the movie.

To pause a movie while it’s playing. To
resume playing a paused movie, press
button again.

Stops the movie.

Displays your instant Queue.

Pauses playing the movie and enters frame
scanning mode.

Pauses playing the movie and enters frame
scanning mode. To scan forward one
frame at a time, press the button again.

ENTER

Pauses playing the movie and enters frame
scanning mode. To scan backward one
frame at a time, press the button again.

Pauses playing the movie and scans for­ward or backward through the movie. To
scan faster, press the button again. To
play the highlighted scene, press ENTER
or

G

(Play). To resume playing from the

point you paused the movie, press .

When you have finished watching movies
streamed from Netflix, simply press the
button on the remote control to go to the
NETWORK Menu.

NETCAST

Playing a movie

MY MEDIA

NETWORK

76

MY

Precautions when using the USB device

G

Only a USB storage device is recognizable.

G

If the USB storage device is connected through a
USB hub, the device is not recognizable.

G

A USB storage device using an automatic recogni­tion program may not be recognized.

G

A USB storage device which uses its own driver
may not be recognized.

G

The recognition speed of a USB storage device
may depend on each device.

G

Please do not turn off the TV or unplug the USB
device when the connected USB storage device is
working. When such device is suddenly separated
or unplugged, the stored files or the USB storage
device may be damaged.

G

Only use a USB storage device which has normal
music files or image files.

G

Please use only a USB storage device which was
formatted as a FAT 32 or NTFS file system provid­ed with the Windows operating system. In case of
a storage device formatted as a different utility
program which is not supported by Windows, it
may not be recognized.

G

Please connect power to a USB storage device
(over 0.5A) which requires an external power sup­ply. If not, the device may not be recognized.

G

Please connect a USB storage device with cable is

offered by USB maker. If connected with cable is
not offered by USB maker or an excessively long
cable, the device may not be recognized.

G

Some USB storage devices may not be supported
or operate properly.

G

Please backup important files because data on
USB device may be damaged. Data management is
consumer's responsibility and as a result, the man­ufacturer does not cover data damage.

G

If your USB memory device has multiple partitions,
or if you use a USB multi-card reader, you can use
up to 4 partitions or USB memory devices.

G

In case of USB storage devices formatted as NTFS,
deletion is not allowable.

G

File alignment method of USB storage device is
similar to Window XP and file name can recognize
up to 100 English characters.

G

The recommended capacity is 1TB or less for a
USB external hard disk and 32 GB or less for USB
memory.

G

If a USB external hard disk with a “Energy Saving”
function doesn’t work, turn the hard disk off and
on again to make it work properly. Refer to the
user manual of the application USB external hard
disk.

When removing the USB device

Connect the USB device to the

USB IN

jacks on the TV.

1

USB IN

IN 4

Memory Key

Select

USB Device

.

Select

Eject

.

Select the

USB Device

menu before removing the

USB device.

1

Q. MENU

2

ENTER

■

This TV supports JPG and MP3 files.

When you connect a USB device, this pop up menu is displayed automatically.
When the P

op Up menu does no

t appear, you can select Photo List or Music List in the NETW

ORK menu.

In USB device, you can not add a new folder or delete the existing folder.

Entry mode using USB device

Close

Choose the media you want.

i

Photo List

Music List

2

Select

MY MEDIA

.

NETCAST

Select

Photo Li s t

or

Music List

.

3

ENTER

ENTER

NETWORK

77

Entry mode using Network

You can view the photo or listen musics in the folder shared by the network.

Click

Sharing

. Check

Share this folde r

.

Connect the Modem or Router LAN port to the LAN port of the TV.

2

Setup CIFS (Commom Internet File System) in your PC.

1

AV IN 1

3

MONO

( )

AUDIOVIDEO L R

LAN

Close

Choose the media you want.

i

Photo List

Music List

3

Select

MY MEDIA

.

NETCAST

Select

Photo Li s t

or

Music List

.

4

ENTER

ENTER

PHOTO LIST

NETWORK

78

NETWORK

You can view .JPG files from USB storage devices or the folder shared by the network.
The On Screen Display on your model may be slightly different.

■

You can play JPG files only.

■

Only baseline scan is supported among JPG.

■

Available JPG size (width x height, pixel): 64 x 64 - 15360 x 8640

Supported photo file: *.JPG

Screen Components

Moves to upper level folder

Preview: Display the
thumbnail/folder name of
the photo in the selected
folder

Current page/Total pages

Total number of marked photos

Corresponding buttons on the
remote control

1

2

3

4

5

Navigation Popup Menu Page Change Mark Exit

CH

MARK

5

Photo List

Up Folder

2

1

1366x768, 125KB

Drive1

butterfly

Page 2/3

No Marked

Up Folder

3 4

NETWORK

79

Select

Photo List

.

2

ENTER

Select the desired photos.

4

ENTER

Select

MY MEDIA

.

1

NETCAST

Photo Selection and Popup Menu

Show the Popup menu.

5

■

Use the

CH

button to navigation in the

photo page.

■

Use the

MARK

button to mark or unmark a
photo. When one or more photos are marked,
you can view individual photos or a slide show
of the marked photos. If no photos are marked,
you can view all photos individually or all pho­tos in the folder in a slide show.

6

Select the desired Popup menu.

Select the target drive or Network.

(It displays the device which con­nected TV).

3

ENTER

ENTER

ENTER

Close

Choose the media you want.

i

Photo List

Music List

Page 1/1

No Marked

Photo List

Up Folder

6 folder(s), 1 file (s)

Drive1 Network

MULTIMEDIA

butterfly

Navigation Page Change Mark Exit

CH

MARK

Popup Menu

Page 1/1

No Marked

Photo List

Up Folder

1366x768, 125KB

Up Folder

Drive1

butterfly

Navigation Page Change Mark Exit

CH

MARK

Popup Menu

Page 1/1

No Marked

Photo List

Up Folder

1366x768, 125KB

Up Folder

Drive1

butterfly

Navigation Page Change Mark Exit

CH

MARK

Popup Menu

1366x768, 125KB

View

Mark All

Delete

Close

When you select a file (not folder), this PopUp
menu is displayed.

G

View

: Display the selected item.

G

Mark All

: Mark all photos on the screen.

G

Unmark All

: Deselect all marked photos.

G

Delete

: Delete the selected photo item.

G

Close

: Close the pop-up menu.

NETWORK

80

NETWORK

Full Screen Menu

You can change the Photo List view so that it fills the screen. More operations are available in full
screen mode.

■

Use the

CH

button to navigation in the

photo page.

Select the target drive or Network.

Select the desired photos.

Show the Popup menu.

5

Select

View

.

The selected photo is displayed in
full size.

2

3

1

4

ENTER

ENTER

ENTER

The aspect ratio of a photo may change the size of
the photo displayed on the screen in full size.

1/17

Slideshow BGM Delete Op tion Hide

Page 1/1

No Marked

Photo List

Up Folder

1366x768, 125KB

Up Folder

Drive1

butterfly

Navigation Page Change Mark Exit

CH

MARK

Popup Menu

Page 1/1

No Marked

Photo List

Up Folder

1366x768, 125KB

Up Folder

Drive1

butterfly

Navigation Page Change Mark Exit

CH

MARK

Popup Menu

1366x768, 125KB

View

Mark All

Delete

Close

NETWORK

81

Select the

Slideshow, BGM

,

(Rotate)

,

Delete,Option

, or

Hide.

■

Use button to select the previous or
next photo.

■

Use button to select and control
the menu on the full-sized screen.

ENTER

6

NOTE

!

G

This TV will not be able to decode
most JPG images saved using the
Progressive option.

1/17

Slideshow BGM Delete Option Hide

Press

F G

to set the time interval between slides.

Slide Speed

Fast

Cancel

...

Music Album

Enter

G

Slideshow

: Selected photos are displayed during the
slide show. If no photo is selected, all photos in the cur­rent folder are displayed during slide show.

■

Set the time interval of the slide show in

Option

.

G

BGM

: Listen to music while viewing photos in full size.

■

Set the BGM device and album in

Option

.

G

(Rotate)

: Rotate photos.

■

Rotates the photo 90°, 18 0 °, 270°, 360° clockwise.

■

Photo cannot be rotated if its width is greater than
the available supported resolution height.

G

Delete

: Delete photos.

G

Option

: Set values for

Slide Speed

and

Music

Album

.

■

Use button and

ENTER

button to set

values. Then go to and press

ENTER

to save

the settings.

■

You cannot change

Music Album

while BGM is

playing.

G

Hide

: Hide the menu on the full-sized screen.

■

To see the menu again on the full-sized screen, press
ENTER

button to display.

MUSIC LIST

NETWORK

82

NETWORK

You can use the Music List menu to play MP3 files from a USB storage device or the folder shared by the
network

This TV cannot play back copy-protected files.
The On Screen Display on your model may be slightly different.

■

Bit rate range 32 Kbps - 320 Kbps

■

Sampling rate (Sampling Frequency)
MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz
MPEG2 layer 3: 16 kHz, 22.05 kHz, 24 kHz
MPEG2.5 layer 3: 8 kHz, 11.025 kHz, 12 kHz

Supported music file: *.MP3

Screen Components

Moves to upper level folder

Preview: If any album jacket
for the file exists, this jack­et is displayed.

Current page/Total pages

Total number of marked
musics

Corresponding buttons on the
remote control

1

2

3

4

5

Navigation Popup Menu Page Change Mark Exit

CH

MARK

5

Music List

2

1

A

00:00 / 04:16

Drive1

Aisensi

Page 2/3

No Marked

Up Folder

3 4

Up Folder

Title Duration

NETWORK

83

Select

Music List

.

2

ENTER

Select the desired musics.

4

ENTER

Select

MY MEDIA

.

1

NETCAST

Music Selection and Popup Menu

Show the Popup menu.

5

6

Select the desired Popup menu.

Select

Drive 1

or

Network

.

(It displays the device which con­nected TV).

3

ENTER

ENTER

ENTER

Close

Choose the media you want.

i

Photo List

Music List

Navigation Page Change Mark Exit

CH

MARK

Popup Menu

Navigation Page Change Mark Exit

CH

MARK

Popup Menu

Page 2/3

No Marked

Music List

Up Folder

A

00:00 / 04:16

Up Folder

Drive1

Title

Duration

Aisensi

Navigation Page Change Mark Exit

CH

MARK

Popup Menu

Page 2/3

No Marked

Music List

Up Folder

A

00:00 / 04:16

Up Folder

Drive1

Title

Duration

3945 KB
128 Kbps

Play

Play with Photo

Mark All

Delete

Close

Aisensi

Page 1/1

No Marked

Music List

Up Folder

6 folder(s), 1 file (s)

Drive1

Network

MULTIMEDIA

Title

Duration

Drive1

NETWORK

84

NETWORK

■

Use the

CH

button to navigation in

the music page.

■

Use

MARK

button to mark or unmark a music
file. If no music is marked, all the music in the
folder will be played in sequence. When one or
more music files are marked, the marked music
files will be played in sequence. If you want to
listen to only one song repeatedly, just mark
that one file and play.

Select the target folder or drive.

Select the desired musics.

Show the Popup menu.

Select the desired Popup menu.

2

3

1

4

ENTER

ENTER

ENTER

5

RETURN

Return to TV viewing.

Navigation Page Change Mark Exit

CH

MARK

Popup Menu

Page 2/3

No Marked

Music List

Up Folder

A

00:00 / 04:16

Up Folder

Drive1

Title

Duration

Aisensi

Navigation Page Change Mark Exit

CH

MARK

Popup Menu

Page 2/3

No Marked

Music List

Up Folder

A

00:00 / 04:16

Up Folder

Drive1

Title

Duration

3945 KB
128 Kbps

Play

Play with Photo

Mark All

Delete

Close

Aisensi

G

Play

(During stop): Play the selected music.

Once a song finishes playing, the next selected
one will be played. When there are no selected
musics to play, the next one in the current fold­er will be played. If you go to a different folder
and press the

ENTER

button, the current

music in playback will stop.

G

Play Marked

: Play the selected musics. Once
a music finishes playing, the next selected one
will be played automatically.

G

Stop P l a y

(During playback): Stop the play-

ing musics.

G

Play w i t h Ph oto

: Start playing the selected

musics and then move to the Photo List.

G

Mark All

: Mark all musics in the folder.

G

Unmark All

: Deselect all marked music.

G

Delete

: Delete the selected music.

G

Close

: Close the pop-up menu.

NETWORK

85

■

The play information box (as shown below) will automatically
move across the screen when there is no user input to pre­vent a fixed image remaining on the screen for a extended
period of time.

NOTE

!

G

When music is playing, is displayed in front of the music play time.

G

A damaged or corrupted music file that does not play displays 00:00 as the play time.

G

Music files with copy-protection will not play.

G

Press

ENTER

, A, or

RETURN

button to stop the screen saver.

YAHOO!WIDGETS

NETWORK

86

NETWORK

You can enjoy widget on your TV and available to select a useful snippets in dock,at the bottom of your TV.
These snippets contain updated weather, sports score, updated stock, and view photo/video.

OOBE (Out-of-Box-Experience)

Select your country.

2

ENTER

Select

Ok, I acc e pt

.

3

ENTER

Select

Save this name

.

6

ENTER

Select the alphabet.

5

ENTER

Display the Yahoo!Widgets.
Start Widgets setting.

1

NETCAST

ENTER

Select

Ok, I acc e pt

.

7

ENTER

Select

Ok, I acc e pt

.

4

ENTER

NETWORK

87

Tutorial 2

Tutorial 3

Tutorial 4

Red button: Close the widget.
Green button: Change the widget’s settings.
Yellow button: Manage your snippets.
Blue button: Size video to fit, or make it fullscreen.

If you wnat to run this step again, select “Replay
introduction” from the Profile widget at any time.

Tutorial 1 Tutorial 5

Tutorial 6

1

Choose any of the menu items

NETWORK

88

NETWORK

Available Widgets

Setting Widgets

Button Operation

Show the DOCK.

Move to sub menu highlight.

Show Snippets.

Return to MENU OSD

Exit Yahoo mode.
Close the widget.

Enter to weather widget setting mode

Change viewport (aspect ratio)

Move between snippets in the dock

Edit snippets

Yahoo
(Widgets)

up/down

Left/right

Yellow

enter

menu

back/red

red

green

blue

L/R button: Select snippet.
U/D
Enter button: Enter the selected widget.
Blue button: Change viewport.
Yellow: Move/Delete the selected widget.
Yahoo: Slide out the dock.
Menu: Show the Menu.

?

G

Flicker

:

G

Finance

:

G

Gallery

:

G

News

:

G

Weather

: When pressing the Yellow button in the

dock, you can select the Weather widget.

NETWORK

89

PICTURE CONTROL

90

PICTURE SIZE (ASPECT RATIO) CONTROL

PICTURE CONTROL

This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.

■

RGB-PC input source use 4:3 or 16:9 aspect ratio.

■

You can also adjust

Aspect Ratio

in

the

Q.MENU

.

■

Press the

RATIO

button repeatedly to

select the desired picture format.

Select

PICTURE

.

Select

Aspect Ratio

.

Select the desired picture format.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

PICTURE

E

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

Enter

Move

PICTURE

E

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

16:9

Just Scan

Set By Program

4:3

Zoom

Cinema Zoom 1

PICTURE CONTROL

91

16:9

Adjust the picture horizontally, in a linear pro­portion to fill the entire screen.

Just Scan

Normally the edges of video signals are cropped
1-2%. Just Scan turns off this cropping and
shows the complete video.

Notes: If there is noise on the edges of the original
signal, it will be visible when Just Scan is activated.

Just Scan

operates only in
DTV/CADTV/Component/HDMI-DTV/DVI-DTV
(720p/1080i/1080p) input source.

Set By Program

Selects the proper picture proportion to match
the source’s image.

4:3

Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.

Zoom

Choose Zoom when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.

■

When adjusting in Q.MENU menu,
a. or button: Adjust proportion of Zoom.
b. or button: Move the image on the screen.

Cinema Zoom

Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.

Note: When enlarging or reducing the picture,
the image may become distorted.

■

or button: Adjust proportion of

Cinema Zoom. The adjustment range is 1-16.

■

or button: Move the image on the screen.

Just Scan

(4:3 4:3)

(16:9 16:9)

Set By Program

Set By Program

PICTURE CONTROL

92

PICTURE WIZARD

PICTURE CONTROL

Select

PICTURE

.

Select

Picture

Wizard

.

1

MENU

2

ENTER

ENTER

Adjust

Pictur e Wizar d

.

Adjust

White Level

.

3

ENTER

Adjust

Black Level

.

4

ENTER

5

ENTER

Adjust

Color

.

6

ENTER

Adjust

Tint

.

7

ENTER

Picture Wizard

With Picture Wizard, you can adjust the picture quality of the
original image.

G

Black Level

Set the screen above identical to the Recommended sample
below.

NextPrevious

NextPrevious

• Brightness 50

EE

E

Low HighRecommended

Color

Set the screen above identical to the Recommended sample
below.

NextPrevious

• Color 50

E

E

Low HighRecommended

White Level

Set the screen above identical to the Recommended sample
below.

NextPrevious

Low HighRecommended

• Contrast 90

E

E

Tint

Set the screen above identical to the Recommended sample
below.

NextPrevious

Low HighRecommended

• Tint 0

E

E

RG

Enter

Move

PICTURE

E

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

This feature lets you adjust the picture quality of the original image.
Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen

quality by easily following each step.
When you adjust the image to

L

Lo w, Recomme n d e d

or

High

, you can see the example of the changes you

made.

PICTURE CONTROL

93

Adjust

Horizont a l

Sharpness

.

8

ENTER

Select input source to apply the
settings.

11

MARK

FAV

Adjust

Vertical

Sharpness

.

9

ENTER

Adjust

Backlight

.

10

ENTER

Finish the Picture Wizard.

13

ENTER

Save.

12

ENTER

Complete

ConfirmMovePrevious

Horizontal Sharpness

Set the screen above identical to the Recommended sample
below.

NextPrevious

• H Sharpness 50

E

E

Low HighRecommended

Vertical Sharpness

Set the screen above identical to the Recommended sample
below.

NextPrevious

• V Sharpness 50

E

E

Low HighRecommended

Backlight

Set the Backlight to your Brightness preference.

NextPrevious

• Backlight 50

E

E

Dark BrightRecommended

DTV

TV

AV1

AV2

Component1

Component2

RGB-PC

HDMI1
HDMI2
HDMI3
HDMI4

Select (an) input(s) to apply the settings.

Warning: The picture quality may vary according to the
different types of signal and inputs.

E

E

Mark

MARK

■

If you stop the setting before the final
step, the changes will not be saved to
the TV.

■

Once the

Pictur e W i zard

sets the pic-

ture quality,

Energy S a v i n g

is changed

to

Off

automatically.

Close

The current adjustment value is saved to
Expert1.

i

For LCD TV

PICTURE CONTROL

94

PRESET PICTURE SETTINGS (PICTURE MODE)

PICTURE CONTROL

There are factory presets for picture settings available in the user menus. You can use a preset, change each
setting manually, or use the Intelligent Sensor.

Select

PICTURE

.

Select

Picture Mode

.

Pla sma TV

: Select

Vivi d,Sta ndard

,

Cine ma, Spor t

, or

Game

.

LCD TV

: Select

Intelli gent S ensor

,

Vivi d,Sta ndard, Nat u ral, Cine ma

,

Spor t

, or

Game

.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

PICTURE

E

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

Intelligent Sensor

Vivid

Standard

Natural

Cinema

Sport

Game

Expert1

Expert2

Vivid

Standard

Cinema

Sport

Game

Expert1

Expert2

■

Vivid, Standard, Natural, Cinema

,

Sport

, and

Game

Settings are preset
for the optimum picture quality at the
factory.

■

Vivid

: This is the mode to maximize the
effect of the video in the retail store.
Strengthen the contrast, brightness,
color and sharpness for vivid picture.

■

Standard

: This is the mode to realize
optimum viewing condition for the gen­eral user.

■

Natural

: This is the mode to display the

most natural screen status.

■

Cinema

: This mode optimizes video for

watching movies.

■

Sp o r t

: This is the video mode to
emphasize dynamic video and primary
color (e.g, white, uniform, grass, sky blue
etc.) by realizing the optimal screen for
sports.

■

Game

: This is the mode to realize fast

response speed in a fast gaming screen.

■

Expert

: This is the mode to adjust the
video in detail for video quality expert
and general user.

■

You can also adjust

Picture Mode

in

the

Q.MENU

.

Enter

Move

PICTURE

E

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

LCD TV

Plasma TV

■

When selecting

Intel l i g ent Sensor,Energy Saving

is changed to

Auto

automatically.

■

When selecting

Intel l i g ent Sen s o r

, it is changed contrast, brightness, sharpness, color and tint auto-

matically.

■

Intel l i g ent Sensor

: The most suitable picture is automatically adjusted according to the surrounding

conditions.

■

Cinema: This is cinema quality mode to provide you the experience of watching a movie at home.
The user will be able enjoy the best level of satisfactory screen quality in any movie without any sepa­rate adjustments. Cinema expresses the optimal screen quality when it is darkest.

■

When selecting

Cinema

, Aspect ratio changes to Just scan.

PICTURE CONTROL

95

MANUAL PICTURE ADJUSTMENT - USER MODE

Adjust the picture appearance to suit your preference and viewing situations.
This feature is disabled in “

Pictur e Mode- C i nema

” (For Plamsa TV).

Select

PICTURE

.

1

MENU

Select

Picture Mode

.

2

ENTER

Enter

Move

PICTURE

E

• Backlight 70

E

E

E

E

Enter

Make appropriate adjustments.

Select

Backlight

(For LCD TV),

Contrast

,

Brightne s s, Sharpness, Color

, or

Tint

.

Select

Vivi d,Sta ndard, Nat u ral

,

Cine ma, Spor t

, or

Game

.

3

ENTER

4

ENTER

5

ENTER

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

■

When adjusting Energy Saving,

Backlight

function is disabled.

■

Backlight

(For LCD TV): This function
adjusts the brightness of LCD panel, to
control the brightness of the screen.
Adjusting the backlight is recommended
when setting the brightness of the set.
When decreasing the backlight, the
brightness of the black becomes darker
without any loss in video signal and the
power consumption is reduced.

■

Contrast

: Increase or decrease the gra­dient of the video signal. You may use
Contrast when the bright part of picture
is saturated.

■

Brightne s s

: Adjusts the base level of
the signal in the picture. You may use
Brightness when the dark part of the pic­ture is saturated.

■

Sharpness

: Adjusts the level of crisp­ness in the edges between the light and
dark areas of the picture. The lower the
level, the softer the image.

■

Color

: Adjusts intensity of all colors.

■

Tint

: Adjusts the balance between red

and green levels.

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

PICTURE CONTROL

96

PICTURE IMPROVEMENT TECHNOLOGY

PICTURE CONTROL

Select

PICTURE

.

Select

Advanc e d C o n t rol

.

Select your desired options.

1

MENU

3

2

ENTER

ENTER

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Make appropriate adjustments.

4

Enter

Move

PICTURE

E

RG

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

You can calibrate the screen for each Picture Mode or set the video value according to the special video screen.
You can set the video seeing differently for each input.
To reset to the factory default after making adjustments to each input source, execute the

Pictur e Reset

function for each Picture Mode.

Color Temperature

F

Medium

G

Dynamic Contrast

Off

Dynamic Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Off

TruMotion 120Hz

Low

Close

E

Color Temperature

F

Medium

G

Dynamic Contrast

Off

Dynamic Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Film Mode

Off

Close

E

Enter

Move

PICTURE

E

RG

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

LCD TV

Plasma TV

PICTURE CONTROL

97

EXPERT PICTURE CONTROL

Select

PICTURE

.

Select

Picture Mode

.

Select

Expert Contro l

.

Select

Expert1

or

Expert2

.

1

MENU

3

2

ENTER

ENTER

4

ENTER

Make appropriate adjustments.

6

7

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

PICTURE

E

RG

• Brightness 50

• H Sharpness 50

• V Sharpness 50

• Color 50

• Tint 0

• Expert Control

• Picture Reset

Screen (RGB-PC)

Dynamic Contrast

F

Off

G

Noise Reduction

Low

Gamma

Medium

Black Level

Low

Real Cinema

Off

TruMotion 120Hz

Low

Color Standard

HD

Color Gamut

Standard

Edge Enhancer

High

Close

E

Dynamic Contrast

F

Off

G

Noise Reduction

Low

Gamma

Medium

Black Level

Low

Film Mode

Off

Color Standard

HD

Color Gamut

Standard

Edge Enhancer

High

xvYCC

Auto

Close

E

Select your desired menu option.

5

ENTER

Enter

Move

PICTURE

E

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Expert1

• Backlight 70

• Contrast 90

• Brightness 50

• H Sharpness 50

Intelligent Sensor

Vivid

Standard

Natural

Cinema

Sport

Game

Expert1

Expert2

By segmenting categories,

Expert1

and

Expert2

provide more categories which users can set as they see

fit, offering the optimal picture quality for users.
This may also be used be a professional to help optimize the TV performance in the environment the TV is in.

LCD TV Plasma TV

PICTURE CONTROL

98

PICTURE CONTROL

■

Set to warm to enhance hotter colors such as red, or set to cool to make picture
bluish.

■

Adjusts the contrast to keep it at the best level according to the brightness of the
screen. The picture is improved by making bright parts brighter and dark parts darker.

■

Adjusts screen colors so that they look livelier, richer and clearer. This feature
enhances hue, saturation and luminance so that red, blue, green and white look
more vivid.

■

Reduces screen noise without compromising video quality.

Low : Make dark and middle gray level area of the picture brighter.
Medium: Express original picture levels.
High: Make dark and middle gray level area of the picture darker.

■

You can adjust brightness of dark area and middle gray level area of the picture.

Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter.
Auto: Realizing the black level of the screen and set it to High or Low automatically.

■

Set black level of the screen to proper level.

■

This function enables to select 'Low' or 'High' in the following mode: AV (NTSC-M),
HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.

■

Adjust the brightness of the screen to prevent the screen from being too bright.
Dims extremely bright pictures.

■

This feature is disabled in “

Pictur e M o d e - V ivid, Cin e m a, Inte l l i g ent

Sensor

(For LCD TV)

”.

■

Makes video clips recorded in film look more natural by eliminating judder effect.

■

DVD and Blu-ray movies are filmed at 24 frames per second. With LG Real Cinema,
every frame is consistently processed 5 times in 1/24 of a second producing 120
fps with TruMotion or 2 times in 1/24 of a second producing 48 fps without
TruMotion, thus totally eliminating the judder effect.

High: Provides smoother picture movement.
Low: Provides smooth picture movement. Use this setting for standard use.
Off: Use this setting when "High" and "Low" setting result in noise.

■

TruMotion120Hz provides even better quality for movies than 3:2 Pull­Down conversions.

■

TruMotion can reduce the perception of blur on fast moving scenes by displaying
120 images per second.

■

It is used for the best picture quality without any motion blur or judder when you
enter a quick image or Film Source.

■

TruMotion120Hz works with all inputs except PC mode.

■

If you enable "TruMotion 120Hz", noise may appear on the screen.
If this occurs, set "TruMotion 120Hz" to "Off".

Dynamic Contrast

Dynamic Color

Noise Reduction

Gamma

Black Level

Eye Care

(For LCD TV)

Real Cinema

or

Film Mode

TruMotion 120Hz

(For LCD TV)

Color Temperature

PICTURE CONTROL

99

■

Convert the color of a different video to HD color.

■

This is the function to adjust the overall color of the screen to the feeling you want.

a. Method : 2 Points

- Pattern: Inner, Outer

- Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 - +50.

LCD TV

b. Method : 10 Point IRE

- Pattern: Inner, Outer

- IRE (Institute of Radio Engineers) is the unit to display the size of the video signal

and can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue accord­ing to each setting.

- Luminance: This function displays calculated luminance value for 2.2 gamma. You can

input luminance value you want at 100 IRE, than the target luminance value for 2.2
gamma is displayed at every 10 steps from 10 IRE to 90 IRE.

- Red/Green/Blue: The adjustment range is -50 - +50.

Plasma TV

b. Method : 20 Point IRE

- IRE (Institute of Radio Engineers) is the unit to display the size of the video signal

and can be set among 5, 10, 15 - 100 Plasma TV. You can adjust Red, Green or Blue
according to each setting.

- Red/Green/Blue: The adjustment range is -50 - +50.

■

As the tool used by the experts to make adjustments by using the test patterns, this
does not affect other colors but can be used to selectively adjust the 6 color areas
(Red/Green/Blue/Cyan/Mgt/Yellow).

Color difference may not be distinctive even when you make the adjustments for the
general video.

Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.

- Red/Green/Blue/Yellow/Cyan, Magenta Color: The adjustment range is -30 - +30.

- Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 - +30.

- This feature is disable in RGB-PC and HDMI-PC mode.

*This feature is not available for all models.

■

As the technology to reduce the power consumption while keeping the same bright­ness, this has the effect of reducing power consumption, improvement in contrast.

White Balance

Color Management System

OPC

Color Standard

Standard: Displays standard color area.
Wide: Mode to use and set the rich color area of the display.

■

Maximize the utilization of color to increase color quality.

Color Gamut

■

Show clearer and distinctive yet natural corners of the video.

Edge Enhancer

■

This is the pattern necessary for expert adjustment.

■

This function is enabled in "

Picture Mode- Expert

" when you watch DTV.

Expert Pattern

■

This is the function to filter the specific colors of the video.

You can use the RGB filter to set color saturation and hue accurately.

Color Filter

■

This is the function to express richer color.

■

This feature represents rich color as much as conventional video signal.

■

This function is enabled in "

Picture mo d e- Cinema, Expert

" when xvYCC sig-

nal is inputted through HDMI.

xvYCC

PICTURE CONTROL

100

ENERGY SAVING

PICTURE CONTROL

It reduces the TV’s power consumption by lowering the backlight level.
The default factory setting complies with the

Energy St a r

requirements and is adjusted to the comfortable

level to be viewed at home.
You can increase the brightness of your screen by adjusting the

Energy Saving

level or by setting the

Picture

Mode

.

Select

PICTURE

.

Select

Energy Saving

.

1

MENU

2

ENTER

3

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Intelligent Sensor

Off

Minimum

Medium

Maximum

Enter

Move

PICTURE

E

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

Auto

Off

Minimum

Medium

Maximum

Screen off

F

High

G

Enter

Move

PICTURE

E

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

LCD TV

Plasma TV

■

When selecting

Scree n off

, TV turned

off after 3 seconds.

■

If you adjust “

Energ y S aving-Auto

(For LCD TV),

Min i m u m, Med i u m

,

Maximum

”,

Backlight

feature will not

work.

■

When selecting

Au t o, Backl i g h t

is
automatically adjusted through
Intel l i g ent s e nsor

according to the

surrounding conditions (For LCD TV).

■

Press the

ENER G Y SA VING

button
repeatedly to select the appropriate
Energy Saving setup.

Pla sma TV

: Select

Intelli g e n t

Sensor, Of f, Minimum, Medium

, or

Maximum

.

*When selecting

IIntell i g e n t S e n s or

LCD TV

: Select

Auto, Of f

,

Minimum, Medium, Maximum

, or

Screen Off

.

Select

Low, Middle

, or

High

.

PICTURE CONTROL

101

PICTURE RESET

Settings of the selected picture modes return to the default factory settings.

Select

PICTURE

.

Select

Pictur e Reset

.

Initialize the adjusted value.

1

MENU

4

2

ENTER

Select

Yes

.

3

ENTER

ENTER

5

MENU

Return to TV viewing.

Enter

Move

PICTURE

E

RG

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

Resetting video configuration...

ii

Enter

Move

PICTURE

E

RG

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

No

Ye s

All picture settings will be resetted.
Continue?

?

PICTURE CONTROL

102

THX MEDIA DIRECTOR -

For Plasma TV

PICTURE CONTROL

Enter

Move

OPTION

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

E

E

Select

OPTION

.

Select

THX Media Direct o r

.

1

MENU

2

ENTER

Select

O norOf f

.

3

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

?

Off

On

PICTURE CONTROL

103

IMAGE STICKING MINIMIZATION (ISM) METHOD -

For Plasma TV

A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You can use
Orbiter to help prevent image sticking. The other two functions are for removing a ghost image.

Select

OPTION

.

Select

ISM Method

.

1

MENU

2

ENTER

Select

Normal, Orbiter, Color Wash

,

or

White Wash

.

3

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

OPTION

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

ISM Method

Demo Mode : Off

Initial Setting : Home Use

Enter

Move

OPTION

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

ISM Method

Demo Mode : Off

Initial Setting : Home Use

Power Light

Standby Light

On

Close

F

On

G

EE

G

An excessive ghosted image may be impossible to
clear entirely with White Wash. To return to nor­mal viewing, press the any button.

NOTE

!

■

Normal

: If image sticking is never a
problem, ISM is not necessary - set to
Normal.

■

Or b it e r

: Orbiter may help prevent
ghost images. However, it is best not to
allow any fixed image to remain on the
screen. To avoid a ghost image on the
screen, the image will move every 2 min­utes.

■

Color Wash

: The color block with the
screen moved a little and the white pat­tern are alternately displayed. It is diffi­cult to see the after image on all colors.

Once it has been corrected it will not be
visible in any color.

■

White W a s h

: White Wash removes
ghost images from the screen. Use spar­ingly. Watch the TV normally for a while
before using this feature to see if the
ghost image disappears on its own.

PICTURE CONTROL

104

POWER INDICATOR -

For LCD TV

PICTURE CONTROL

Select

OPTION

.

Select

Power Indica t o r

.

1

MENU

2

ENTER

Select

Standb y LightorPower Light

.

3

ENTER

Select your desired options.

4

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

■

Sta ndby Li ght

: Determines whether to
set the indicator light on the front of the
TV to

O n

or

Of f

in standby mode.

■

Power Light

: Determines whether to set
the indicator light on the front of the TV
to

O n

or

Off

when the power turns on.

Enter

Move

OPTION

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Power Indicator

Demo Mode : Off

Initial Setting : Home Use

Enter

Move

OPTION

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Power Indicator

Demo Mode : Off

Initial Setting : Home Use

Power Light

Standby Light

On

Close

F OnG

EE

Adjust the power/standby indicator light of TV front.

PICTURE CONTROL

105

DEMO MODE

Select

OPTION

.

Select

Demo Mode

.

1

MENU

2

ENTER

Pla sma TV

: Select

LED O n

or

LED

Of f

to show the various feature of

the TV.

LCD TV

: Select

O n

to show the vari-

ous feature of the TV.

3

ENTER

4

MENU

Return to TV viewing.
After a while,

Demo Mode

starts.

If you want to stop the demo, press any button
(Except VOL +, - and MUTE button).

Enter

Move

OPTION

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Power Indicator

Demo Mode : Off

Initial Setting : Store Demo

Enter

Move

OPTION

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Power Indicator

Demo Mode : On

Initial Setting : Store Demo

EE

Off

On

Off

On (LED On)

On (LED Off)

Displays a slide show to explain the various feature of this TV.

■

This feature is disabled in “

In i t ial

Settin g - Home Use

”.

■

LED O n

: ?

■

LED Off

: ?

LCD TV

Plasma TV

SOUND & LANGUAGE CONTROL

106

AUTO VOLUME LEVELER (AUTO VOLUME)

SOUND & LANGUAGE CONTROL

Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a
regular TV program.

Because each broadcasting station has its own signal conditions, volume adjustment may be needed every
time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic
adjustments for each program.

Select

AUDIO

.

Select

Auto Volume

.

Select

O n

or

Of f

.

Enter

Move

AUDIO

E

LR

Enter

Move

AUDIO

E

LR

1

MENU

3

2

ENTER

ENTER

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Auto Volume : On

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Off

On

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

-+

-+

SOUND & LANGUAGE CONTROL

107

CLEAR VOICE II

By differentiating the human sound range from others, it improves the sound quality of voices.

Enter

Move

AUDIO

E

LR

Enter

Move

AUDIO

E

LR

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Auto Volume : Off

Clear Voice II : On

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Select

AUDIO

.

Select

Clear Voice II

.

Select

O n

or

Of f

.

1

MENU

3

2

ENTER

ENTER

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Select

Level

.

4

ENTER

Make appropriate adjustments.

5

ENTER

Adjustment for Clear Voice Level
With selecting

O n

-+ -+

Off

On

SOUND & LANGUAGE CONTROL

108

PRESET SOUND SETTINGS (SOUND MODE)

SOUND & LANGUAGE CONTROL

Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate
sound options based on the program content.

Select

AUDIO

.

Select

Sound Mode

.

Select

Standard, Music

,

Cinema, Sport

, or

Game

.

1

MENU

3

2

ENTER

ENTER

Enter

Move

AUDIO

E

LR

Enter

Move

AUDIO

E

LR

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Standard

Music

Cinema

Sport

Game

■

Standard, Music, Cinema, Sport

,

and

Ga m e

are preset for optimum

sound quality at the factory.

■

You can also adjust

Sound M ode

in

the

Q.MENU

.

■

St a nd a r d

: Offers standard-quality

sound.

■

Music

: Optimizes sound for listening to

music.

■

Cinema

: Optimizes sound for watching

movies.

■

Sport

: Optimizes sound for watching

sports events.

■

Gam e

: Optimizes sound for playing

games.

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

-+ -+

SOUND & LANGUAGE CONTROL

109

SOUND SETTING ADJUSTMENT - USER MODE

SRS TRUSURROUND XT

Adjust the sound to suit your taste and room situations.

Select this option to sound realistic.

Select

AUDIO

.

Select

Sound Mode

.

Select

Treble

or

Bass

.

1

MENU

4

2

ENTER

Select

Standard, Music

,

Cinema, Sport

, or

Game

.

3

ENTER

ENTER

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Select

AUDIO

.

Select

SRS TruSur r o und X T

.

Select

O n

or

Of f

.

1

MENU

3

2

ENTER

ENTER

■

If sound quality or volume is not at the level
you want, it is recommended to use a separate
home theater system or amp to cope with dif­ferent user environments.

■

If you select “

Clear V oice II-O n

”,

SR S

TruSur r o u nd X T

feature will not work.

■

SRS Tru S urroun d XT

: TruSurround XT is a
patented SRS technology that solves the prob­lem of playing 5.1 multichannel content over
two speakers.

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Make appropriate adjustments.

5

ENTER

Close

E

E

• Treble 50

• Bass 50

•

SRS TruSurround XT

Off

-+ -+

SOUND & LANGUAGE CONTROL

110

BALANCE

SOUND & LANGUAGE CONTROL

Select

AUDIO

.

Select

Balance

.

Make appropriate adjustments.

1

MENU

3

2

ENTER

ENTER

Adjust the left/right sound of speaker to suit your taste and room situations.

Enter

Move

AUDIO

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

LR

E

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Close

E

E

Balance 0

LR

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

-+

-+

SOUND & LANGUAGE CONTROL

111

TV SPEAKERS ON/OFF SETUP

Turn the TV speakers off if using external audio equipment.
In

A V, Component, RG B

and

HDMI

with HDMI to DVI cable, the TV speaker can be operational even when

there is no video signal.
If you wish to use an external Hi-Fi system or a SRS System, turn off the TV’s internal speakers.

Enter

Move

AUDIO

E

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

Select

AUDIO

.

Select

TV Speaker

.

Select

O n

or

Of f

.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

LR

Enter

Move

AUDIO

E

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

LR

Off

On

-+ -+

SOUND & LANGUAGE CONTROL

112

AUDIO RESET

SOUND & LANGUAGE CONTROL

Settings of the selected Sound Mode return to the default factory settings.

Select

AUDIO

.

Select

Reset

.

1

MENU

2

ENTER

Initialize the adjusted value.

3

ENTER

4

MENU

Return to TV viewing.

Enter

Move

AUDIO

E

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

LR

Enter

Move

AUDIO

E

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

LR

Resetting audio configuration...

i

-+ -+

SOUND & LANGUAGE CONTROL

113

STEREO/SAP BROADCAST SETUP

For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom­panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used
if the broadcast is only in Mono.

Select

SAP

.

Select

Mono, Stereo

, or

SA P

.

Return to TV viewing.

1

Q. MENU

3

2

Q. MENU

Select

Multi Audio

.

Select other languages.

Return to TV viewing.

1

Q. MENU

3

2

Q. MENU

Analog TV Digital TV

A

English

F

Multi Audio

G

SOUND & LANGUAGE CONTROL

114

AUDIO LANGUAGE

SOUND & LANGUAGE CONTROL

Other languages may be available if a digital signal is provided by the broadcasting station.
This feature operates only in DTV/CADTV mode.

Select

OPTION

.

Select

Audio Langua g e

.

Select your desired language.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

OPTION

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

English

Spanish

French

E

E

SOUND & LANGUAGE CONTROL

115

ON-SCREEN MENUS LANGUAGE SELECTION

The menus can be shown on the screen in the selected language.

Select

OPTION

.

Select

Menu Langua g e

.

Select your desired language.
From this point on, the on-screen menus will

be shown in the selected language.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

OPTION

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

E

E

English

Español

Français

SOUND & LANGUAGE CONTROL

116

CAPTION MODE

SOUND & LANGUAGE CONTROL

Captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying cap­tioning information if provided on a program. Analog caption displays information at any position on the screen
and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both
digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode
which was last set when you turned the power off. This function is only available when

Caption

Mode is set

O n

.

Select

OPTION

.

Select

Caption

.

Select

O n

.

1

MENU

3

2

ENTER

ENTER

Select

CC1-4

or

Text1-4

.

4

Analog Broadcasting System Captions

■

When selecting

Of f

, Sub-menus for
Analog, DTV, and Digital Option become
disabled.

■

CAPTION

The term for the words that scroll
across the bottom of the TV screen;
usually the audio portion of the pro­gram provided for the hearing impaired.

■

TEXT

The term for the words that appear in a
large black frame and almost cover the
entire screen; usually messages provid­ed by the broadcaster.

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

OPTION

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : CC1

E

E

Mode

CC1

Close

Digital Option

F

On

G

SOUND & LANGUAGE CONTROL

117

Digital Broadcasting System Captions

Choose the language you want the DTV/CADTV Captions to appear in.
Other Languages can be chosen for digital sources only if they are included on the program.
This function in only available when Caption Mode is set On.

Select

OPTION

.

Select

Caption

.

Select

O n

.

1

MENU

3

2

ENTER

ENTER

Select

CC1-4, Text1-4

, or

Service1- 6

.

4

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

OPTION

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : CC1

E

E

Mode

CC1

Close

Digital Option

F

On

G

SOUND & LANGUAGE CONTROL

118

SOUND & LANGUAGE CONTROL

Caption Option

Customize the DTV/CADTV captions that appear on your screen.
This function in only available when Caption Mode is set On.

Select

OPTION

.

Select

Caption

Select

O n

.

1

MENU

3

2

ENTER

ENTER

Select

Custom

.

5

ENTER

Customize the

Size, Font

, etc., to your
preference. A preview icon is provided at
the bottom of the screen, use it to see the
caption language.

6

Select

Digita l Optio n

.

4

Size

A Standard

Font

Font 1

Text Color

White

Text Opacity

Solid

Edge Type

None

Edge Color

Black

Bg Color

Black

Bg Opacity

Solid

Close

F

Custom

G

■

Size

: Set the word size.

■

Font

: Select a typeface for the text.

■

Text Color

: Choose a color for the

text.

■

Text Opacity

: Specify the opacity

for the text color.

■

Bg (Backg r o und) Color

: Select a

background color.

■

Bg (Backg r o und) Opacity

: Select

the opacity for the background color.

■

Edge Type

: Select an edge type.

■

Edge Color

: Select a color for the

edges.

7

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

OPTION

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Menu Language : English

Audio Language : English

Input Label

THX Media Director : Off

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : CC1

E

E

Mode

CC1

Close

Digital Option

On

TIME SETTING

119

CLOCK SETTING

TIME SETTING

Auto Clock Setup

The time is set automatically from a digital channel signal.
The digital channel signal includes information for the current time provided by the broadcasting station.
Set the clock manually if the current time is set incorrectly by the auto clock function.

Enter

Move

TIME

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Month

Date

21

Year

2009

Hour

10 AM

02

Minute

10

Time Zone

Eastern

Daylight
Saving

Auto

Close

F

Auto

G

Select

TIME

.

Select

Clock

.

Select

Auto

.

1

MENU

3

2

ENTER

ENTER

Select your viewing area time zone.

• U.S.A:

Ea s ter n, Ce n tra l, Mo u n ta i n

,

Pacific, Alaska

, or

Hawaii

.

• Canada:

Eastern, Central, Mountain

,

Pacific, New F.lan d

, or

Atlant i

c

.

4

Select

Auto, Off

, or

O n

(depending on
whether or not your viewing area observes
Daylight Saving time).

5

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

TIME SETTING

120

TIME SETTING

Manual Clock Setup

If the current time setting is wrong, reset the clock manually.
If this TV is unplugged once or turn off with the AC power control switch on the TV, reset the

Clock

function.

Enter

Move

TIME

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Select

TIME

.

Select

Clock

.

Select

Manual

.

1

MENU

3

2

ENTER

ENTER

Select the Year, Month, Date, Hour, or Minutes
option.

4

Set the Year, Month, Date, Hour, or Minutes
option.

5

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Month

Date

21

Year

2009

Hour

10 AM

02

Minute

10

Time Zone

Eastern

Daylight
Saving

Auto

Close

F

Manual

G

TIME SETTING

121

AUTO ON/OFF TIME SETTING

This function operates only if the current time has been set.
The

Off Time

function overrides the

On Time

function if they are both set to the same time.

The TV must be in standby mode for the

On Time

to work.

If you do not press any button within 2 hours after the TV turns on with the

On Time

function, the TV will

automatically revert to standby mode.

■

To cancel

On/Off Time

function, select

Of f

.

■

Only for On Time function

Select

Input

.

Select the desired input source.

Enter

Move

TIME

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Clock

Off Time : Off

On Time : 6:30 AM (Once)

Sleep Timer : Off

Select

TIME

.

Select

Off Time

or

On Time

.

Select

Repeat

.

1

MENU

3

2

ENTER

ENTER

Select

Of f, Once, Daily, Mon.~Fri.

,

Mon.~Sat., Sat.~Sun.

, or

Sun.

.

4

Select and set

Hour

or

Minute

.

5

1

ENTER

3

4

2

When Selecting

T V

:

set the channel at turn-on.

Adjust to sound level at
turn-on.

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Repeat

F

Once

G

Hour

6 AM

Minute

30

Input

TV

Channel

TV 2-0

Volume

30

Close

Feb. 21, 2009 10:10 AM

TIME SETTING

122

SLEEP TIMER SETTING

TIME SETTING

The Sleep Timer turns the TV off at the preset time.
Note that this setting is cleared when the TV is turned off.

■

To cancel the

Sleep T imer

, select

Of f

.

■

You can also adjust

Sleep Timer

in the

Q.MENU

.

■

Press the

SLEEP

button repeatedly to

select the number of minutes.

Enter

Move

TIME

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Select

TIME

.

Select

Sleep Timer

.

Make appropriate adjustments.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Off

10 min.

20 min.

30 min.

60 min.

90 min.

120 min.

180 min.

240 min.

PARENTAL CONTROL / RATING

123

PARENTAL CONTROL / RATINGS

Parental Control can be used to block specific channels, ratings and other viewing sources.

The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad­casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the
type of the program and the categories. It is also possible to block all program viewing for a time period. To use
this function, the following must be done :

1. Set ratings and categories to be blocked.

2. Specify a password

3. Enable the lock

V-Chip rating and categories

Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be
blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to­video movies use the Movie Rating System (MPAA)only.

Ratings for Television programs including made-for-TV movies:

■

TV-G(General audience

)

■

TV-PG(Parental guidance suggested

)

■

TV-14(Parents strongly cautioned

)

■

TV-MA (Mature audience only

)

■

TV-Y(All children

)

■

TV-Y7(Children 7 years older

)

Set up blocking schemes to block specific channels, ratings, and external viewing sources.
A password is required to gain access to this menu.

Setting up Your Password

For USA

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

For Canada

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Close

Enter Password

* * * *

Select

LOCK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

■

Enter the password as requested.

■

The TV is set up with the initial pass­word “0-0-0-0”.

SET PASSWORD & LOCK SYSTEM

PARENTAL CONTROL / RATING

124

PARENTAL CONTROL / RATINGS

Enables or disables the blocking scheme you set up previously.

Lock System

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

Lock System

.

Select

O n

or

Of f

.

4

3

ENTER

Enter

Move

LOCK

Lock System : On

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Off

On

■

When you select

O n

, the Lock System

is enable.

Select

LOCK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

125

Change the password by inputting a new password twice.

Set Password

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

Set Pass w ord

.

Choose any 4 digits for your new password.
As soon as the 4 digits are entered, re-enter

the same 4 digits on the

Confirm

.

4

3

ENTER

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Close

New

* * * *

Confirm

* * * *

Select

LOCK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

126

CHANNEL BLOCKING

PARENTAL CONTROL / RATINGS

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

Bloc k Cha n nel

.

Select a channel to block or unblock.

4

3

ENTER

Block or unblock a channel.

5

Blocks any channels that you do not want to watch or that you do not want your children to watch.

Select

LOCK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Ch. Change

Page Change

CH

Navigation

Previous

Block/Unblock

■

If a channel is locked, enter the pass­word to unlocked it temporarily.

PARENTAL CONTROL / RATING

127

MOVIE & TV RATING

Movie Rating (MPAA)

-

For USA

Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can
set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that
the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

Movie Rat i ng

.

Select G,

P G, PG-13, R, NC-17

,

X

, or

Blo cking Off

.

4

3

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Blocking off : Permits all programs

G

PG

PG-13

R

NC-17

X

Blocking Off

■

If

Movie Rat i n g, TV Ratin g -

Chi ldren

or

TV Rat ing-Gener al

is
locked, enter the password to unlocked
it temporarily.

■

G (General audience)

■

PG (Parental guidance suggested)

■

PG-13 (Parents strongly cautioned)

■

R (Restricted)

■

NC-17 (No one 17 and under admitted)

■

X (Adult only)

■

Blocking Off (Permits all programs)

G

If you set PG-13: G and PG movies will
be available, PG-13, R, NC-17 and X will
be blocked.

Select

LOCK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

128

PARENTAL CONTROL / RATINGS

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

TV Rati n g-Child r en

.

Select

Age

or

Fant a sy Violence

.

4

3

ENTER

Select block options.

5

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

■

Age (applies to TV-Y, TV-Y7)

■

Fantasy Violence (applies to TV-Y7)

TV Rating Children

-

For USA

Prevents children from watching certain children's TV programs, according to the ratings limit set. The children
rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi­ences in the TV Rating - sub menu, your children can view those programs.

Close

Age

Fantasy Violence

Select

LOCK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

129

TV Rating General

-

For USA

Based on the ratings, blocks certain TV programs that you and your family do not want to view.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

TV Rati n g-Gener a l

.

Select

Ag e, Dialogue, Language

,

Sex

or

Violen c e

.

4

3

ENTER

Select block options.

5

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

■

Age (applies to TV-G,TV-PG,TV-14,TV­MA).

■

Dialogue-sexual dialogue (applies to
TV-PG,TV-14).

■

Language-adult language (applies to
TV-PG, TV-14, TV-MA).

■

Sex-sexual situations (applies to TV-PG,
TV-14, TV-MA).

■

Violence (applies to TV-PG, TV-14, TV­MA).

Close

Age

Dialogue

Language

Sex

Violence

Select

LOCK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

130

PARENTAL CONTROL / RATINGS

TV Rating English

-

For CANADA

Selecting Canadian English rating system.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Select

TV Rati n g-Engli s h

.

Select E, C,

C8+, G, PG

,

14+, 18+

, or

Blo cking Off

.

4

3

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Blocking off : Permits all programs

E

C

C8+

G

PG

14+

18+

Blocking Off

■

If

TV Ratin g - E nglish

or

TV Rating-

French

is locked, enter the password

to unlocked it temporarily.

■

E (Exempt)

■

C (Children)

■

C8+ (Children eight years and older)

■

G (General programming, suitable for
all audiences)

■

PG (Parental Guidance)

■

14+ (Viewers 14 years and older)

■

18+ (Adult programming)

■

Blocking Off (Permits all programs)

Select

LOCK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

131

TV Rating French

-

For CANADA

Selecting Canadian French rating system.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Select

TV Rati n g-French

.

Select E, G,

8ans+, 13ans+

,

16ans+, 18ans+

, or

Block i ng off

.

4

3

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Blocking off : Permits all programs

E

G

8ans+

13ans+

16ans+

18ans+

Blocking Off

■

E (Exempt)

■

G (General)

■

8ans+ (General-Not convenient for lit­tle children)

■

13ans+ (Not convenient for children of
13 years and younger)

■

16ans+ (Not convenient for children of
16 years and younger)

■

18ans+ (This programs is only for
adults)

■

Blocking off (Permits all programs)

Select

LOCK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

132

DOWNLOADABLE RATING

PARENTAL CONTROL / RATINGS

This function is available only for digital channels.
This function operates only when TV has received Region5 Rating data.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Humor

Sport

Cruelty

Language

Sadness

Genre

Age

Close

E

E

Select

Down l oadable Rat i ng

.

Select desired

Downl o adable

Rating

option.

4

3

ENTER

Select desired option and block it.

5

ENTER

Select

LOCK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

■

Based on rating table, your TV's OSD
(On Screen Display) may differ slightly
from what is shown in this manual.

■

If a Downloadable rating is locked,
enter the password to unlocked it
temporarily.

PARENTAL CONTROL / RATING

133

EXTERNAL INPUT BLOCKING

Enables you to block an input.

Select

Input Blo c k

.

Select input source.

4

3

Select

O n

or

Off

.

5

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

LOCK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

AV1

F

Off

G

AV2

Off

Component1

Off

HDMI1

Off

RGB-PC

Off

Component2

Off

HDMI2

Off

HDMI3

Off

HDMI4

Off

Close

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

APPENDIX

134

TROUBLESHOOTING

APPENDIX

The operation does not work normally.

The video does not work.

No picture &No sound

No or poor color

or poor picture

Poor reception on

some channels

Lines or streaks

in pictures

No picture

when connecting HDMI

Horizontal/vertical bars

or picture shaking

Picture appears slowly

after switching on

The remote control

doesn’t work

Power is suddenly

turned off

■

Check to see if there is any object between the product and the remote control
causing obstruction. Ensure you are pointing the remote control directly at the TV.

■

Ensure that the batteries are installed with correct polarity (+ to +, - to -).

■

Ensure that the correct remote operating mode is set: TV, VCR etc.

■

Install new batteries.

■

Is the sleep timer set?

■

Check the power control settings. Power interrupted.

■

TV will be automatically turned off, in case of no signal for 15 minutes.

■

Check whether the product is turned on.

■

Try another channel. The problem may be with the broadcast.

■

Is the power cord inserted into wall power outlet?

■

Check your antenna direction and/or location.

■

Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.

■

This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.

■

Adjust Color in menu option.

■

Keep a sufficient distance between the product and the VCR.

■

Try another channel. The problem may be with the broadcast.

■

Are the video cables installed properly?

■

Activate any function to restore the brightness of the picture.

■

Check for local interference such as an electrical appliance or power tool.

■

Station or cable product experiencing problems, tune to another station.

■

Station signal is weak, reorient antenna to receive weaker station.

■

Check for sources of possible interference.

■

Check antenna (Change the direction of the antenna).

■

Check HDMI cable over version 1.3.
The HDMI cables don’t support HDMI version 1.3, it cause flickers or no screen

display. In this case use the latest cables that support HDMI version 1.3.

*This feature is not available for all models.

APPENDIX

135

There is a problem in PC mode. (Only PC mode applied)

■

Adjust resolution, horizontal frequency, or vertical frequency.

■

Check the input source.

■

Work the Auto configure or adjust clock, phase, or H/V position. (Option)

■

Check the signal cable.

■

Reinstall the PC video card.

The signal is out of range

Screen color is unstable

or single color

Vertical bar or stripe on

background &

Horizontal Noise &

Incorrect position

Picture OK & No sound

Unusual sound from

inside the product

No sound

when connecting

HDMI/USB

No output from one

of the speakers

The audio does not work.

■

Press the VOL or VOLUME button.

■

Sound muted? Press MUTE button.

■

Try another channel. The problem may be with the broadcast.

■

Are the audio cables installed properly?

■

Adjust Balance in menu option.

■

A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.

■

Check HDMI cable over version 1.3.

■

Check USB cable over version 2.0.

■

Use normal MP3 file.

*This feature is not available for all models.

APPENDIX

136

APPENDIX

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can
enjoy your new TV.

Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.

Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning the Cabinet

■

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.

■

Please be sure not to use a wet cloth.

Extended Absence

G

If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.

CAUTION

2

1

APPENDIX

137

PRODUCT SPECIFICATIONS

■

The specifications shown above may be changed without prior notice for quality improvement.

MODELS

AC100-240V ~ 50/60Hz

NTSC-M, ATSC, 64 & 256 QAM

VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135

75 ohm

32 ~ 104°F (0 ~ 40°C)

Less than 80%

-4 ~ 140°F (-20 ~ 60°C)

Less than 85%

Dimensions
(Width x Height
x Depth)

Weight

Power requirement
Television System
Program Coverage
External Antenna Impedance

Environment
condition

With stand

Without stand

With stand
Without stand

Operating Temperature
Operating Humidity

Storage Temperature
Storage Humidity

50PS80

(50PS80-UA)

60PS80

(60PS80-UA)

48.4 x 32.9 x 12.2 inches

1228.0 x 835.8 x 309.0 mm

48.4 x 31.3 x 3.1 inches

1228.0 x 795.1 x 78.9 mm

84.4 lbs / 38.3 kg

75.6 lbs / 34.3 kg

57.7 x 38.6 x 15.5 inches

1465.4 x 982.6 x 395.5 mm

57.7 x 36.5 x 3.2 inches

1465.4 x 926.7 x 82.1 mm

115.5 lbs / 52.4 kg

102.7 lbs / 46.6 kg

Dimensions
(Width x Height
x Depth)

Weight

With stand

Without stand

With stand
Without stand

41.4 x 28.3 x 11.6 inches

1052.2 x 719.1 x 296.2 mm

41.5 x 25.8 x 3.5 inches

1052.2 x 657.3 x 90.8 mm

41.8 lbs / 19.0 kg

37.9 lbs / 17.2 kg

46.1 x 31.0 x 13.2 inches

1173.4 x 789.7 x 337.4 mm

46.1 x 28.4 x 3.9 inches

1173.4 x 723.4 x 100.8 mm

51.5 lbs / 23.4 kg

45.8 lbs / 20.8 kg

MODELS

42LH50

(42LH50-UA)

47LH50

(47LH50-UA)

APPENDIX

138

IR CODES

APPENDIX

■

Configuration of frame

1st frame

Repeat frame

■

Lead code

■

Repeat code

■

Bit desc r iption

■

Fram e i n terval: Tf

The waveform is transmitted as long as a key is depressed.

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Lead code Low custom code High custom code Data code Data code

Repeat code

Tf

4.5 ms

9 ms

2.25 ms

9 ms

0.55 ms

0.56 ms

1.12 ms

0.56 ms

2.24 ms

Tf Tf

Tf=108ms @455KHz

Bit ”0” Bit ”1”

1. How to Connect

■

Connect your wired remote control to the Remote Control port on the TV.

2. Remote Control IR Codes

■

Output waveform

Single pulse, modulated with 37.917KHz signal at 455KHz

T1

Tc

Carrier frequency

FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3

APPENDIX

139

Code

Function Note

(Hexa)

Code

Function Note

(Hexa)

08 POWER

Remote control Button (Power On/Off)

45 Q.MENU Remote control Button

43 MENU Remote control Button

0B INPUT Remote control Button

10-19 Number Key 0-9 Remote control Button

4C - (Dash)/LIST Remote control Button

1A FLASHBK Remote control Button

09 MUTE/DELETE Remote control Button

02 VOL + Remote control Button

03 VOL - Remote control Button

00 CH Remote control Button

01 CH Remote control Button

1E

FAV/MARK/ CHAR/NUM

Remote control Button

40 Remote control Button

41 Remote control Button

07 Remote control Button

06 Remote control Button

44 ENTER Remote control Button

28 RETURN Remote control Button

79 RATIO Remote control Button

? FREEZE Remote control Button

95 ENERGY SAVING Remote control Button

7E SIMPLINK Remote control Button

AA INFO Remote control Button

30 AV MODE Remote control Button

58 WIDGETS Remote control Button

59 NETCAST Remote control Button

72 RED Remote control Button

71 GREEN Remote control Button

63 YELLOW (

G

) Remote control Button

61 BLUE (

l l

) Remote control Button

B1

A

Remote control Button

B0

G

Remote control Button

BA

l l

Remote control Button

8F

FF

Remote control Button

8E

GG

Remote control Button

D6 TV Discrete IR Code

(TV Input Selection)

C4 POWER ON Discrete IR Code

(Only Power On)

C5 POWER OFF Discrete IR Code

(Only Power Off)

5A AV1 Discrete IR Code

(AV1 Input Selection)

D0 AV2 Discrete IR Code

(AV2 Input Selection)

BF COMPONENT1 Discrete IR Code

(Component1 Input Selection)

D4 COMPONENT2 Discrete IR Code

(Component2 Input Selection)

D5 RGB-PC Discrete IR Code

(RGB-PC Input Selection)

CE HDMI1 Discrete IR Code

(HDMI1 Input Selection)

CC HDMI2 Discrete IR Code

(HDMI2 Input Selection)

E9 HDMI3 Discrete IR Code

(HDMI3 Input Selection)

DA HDMI4 Discrete IR Code

(HDMI4 Input Selection)

76 Ratio 4:3 Discrete IR Code

(Only 4:3 Mode)

77 Ratio 16:9 Discrete IR Code

(Only 16:9 Mode)

AF Ratio Zoom Discrete IR Code

(Only Zoom Mode)

RS-232C Setup

The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the TV’s functions externally.

■

Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software.

The instructions below are provided to help with programming software or to test functionality using telenet
software.

VIDEO

AUDIO

L R

AUDIO IN

(RGB/DVI)

OPTICAL DIGITAL

AUDIO OUT

ANTENNA/

CABLE IN

RGB IN (PC)

AV IN 1

COMPONENT IN

2

3

1

MONO

( )

AUDIOVIDEO L R

/DVI IN

RS-232C IN

(

CONTROL&SERVICE)

Type of Connector; D-Sub 9-Pin Male

No. Pin Name

1 No connection
2 RXD (Receive data

)

3 TXD (Transmit data

)

4 DTR (DTE side ready

)

5 GND
6 DSR (DCE side ready

)

7 RTS (Ready to send

)

8 CTS (Clear to send

)

9 No Connection

1

6

5

9

PC

i.e)

Communication Parameters

■

Baud rate : 9600 bps (UART

)

■

Data length : 8 bits

■

Parity : None

■

Stop bit : 1 bit

■

Communication code : ASCII code

■

Use a crossed (reverse) cable.

NOTE

!

G

This product has command echo back in the
RS-232C Command.

APPENDIX

140

EXTERNAL CONTROL THROUGH RS-232C

APPENDIX

APPENDIX

141

RS-232C Configurations

Use this function to specify a TV ID number.
Refer to ‘Real Data Mapping’.

Either cable below can be used.

Set ID

PC TV

RXD 2 3 TXD
TXD 3 2 RXD
GND 5 5 GND

DTR 4 6 DSR
DSR 6 4 DTR
RTS 7 8 CTS
CTS 8 7 RTS

D-Sub 9 D-Sub 9

PC TV

RXD 2 3 TXD
TXD 3 2 RXD

GND 5 5 GND

DTR 4 6 DTR
DSR 6 4 DSR

RTS 7 7 RTS

CTS 8 8 CTS

D-Sub 9 D-Sub 9

7-Wire Configuration

(

Serial female-female NULL modem cable

)

3-Wire Configurations

(

Not standard

)

Select

OPTION

.

Select

Set ID

.

Choose the desired TV ID number.
The adjustment range of Set ID is

1~99.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

■

Real data mapping

0 : Step 0

A : Step 10 (SET ID 10)

F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)

63 : Step 99 (SET ID 99)
64 : Step 100

Enter

Move

OPTION

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

ISM Method

Demo Mode : Off

Initial Setting : Home Use

Enter

Move

OPTION

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

ISM Method

Demo Mode : Off

Initial Setting : Home Use

EE

F

1

G

Close

APPENDIX

142

Command Reference List

APPENDIX

COM MAND 1 C OMM AND2

21. Channel Tuning

DATA

(Hexadecimal)

COM MAND 1 C OMM AND2

DATA

(Hexadecimal)

COMMAND1 COMMAND2

DATA00

(Hexadecimal)

DATA01

(Hexadecimal)

DATA02

(Hexadecimal)

DATA03

(Hexadecimal)

DATA04

(Hexadecimal)

DATA05

(Hexadecimal)

physical major major low minor high minor low attribute

program high program low

ma

01. Power k a 00 ~ 01

02. Input Select x b (

G

p.141)

03. Aspect Ratio k c (

G

p.141)

04. Screen Mute k d (

G

p.141)

05. Volume Mute k e 00 ~ 01

06. Volume Control k f 00 ~ 64

07. Contrast k g 00 ~ 64

08. Brightness k h 00 ~ 64

09. Color k i 00 ~ 64

10. Tint k j 00 ~ 64

11. Sharpness k k 00 ~ 64

12. OSD Select k l 00 ~ 01

13. Remote Control

Lock Mode

Transmission / Receiving Protocol

Tra nsmi s sion

[Command 1] : First command to control the set.

(j, k, m or x)

[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired TV ID

number in Setup menu. Adjustment range is 1

~ 99.

When selecting Set ID ‘0’, every connected the TV is
controlled. Set ID is indicated as decimal (1

~ 99

)

on

menu and as Hexa decimal (0x0

~0x63

)

on transmission

/receiving protocol.

[DATA] : To transmit the command data.

Transmit the ‘FF’ data to read status of command.

[Cr] : Carriage Return

ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
* In this model, TV will not send the status during the standby mode.

OK A ckno wled g eme n t

The TV transmits ACK (acknowledgement) based on this for­mat when receiving normal data. At this time, if the data is
data read mode, it indicates present status data. If the data is
data write mode, it returns the data of the PC computer.

* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[OK] : Use the large character.

Err or Ac know ledg emen t

The TV transmits ACK (acknowledgement) based on this for­mat when receiving abnormal data from non-viable functions
or communication errors.

Data1: Illegal Code
Data2: Not supported function

Data3: Wait more time
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[NG] : Use the large character

[Co mman d1] [Com mand 2][ ] [Set ID][ ][Da ta][ Cr]

[Co mman d2] [ ][Se t ID] [ ][O K][D ata ] [x]

[Co mman d2] [ ][Se t ID] [ ][N G][D ata ] [x]

14. Treble k r 00 ~ 64

15. Bass k s 00 ~ 64

16. Balance k t 00 ~ 64

17.

Color Temperature

k u 00 ~ 02

18. ISM Method j p (

G

p.142)

19. Energy Saving j q (

G

p.142)

20. Auto Configuration j u (

G

p.142)

22. Channel Add/Del m b 00 ~ 01

23 . Ke y m c (

G

p.143)

24. Backlight m g 00 ~ 64

00 ~ 01

k m

Only Plasma TV Model

Only LCD TV Model

APPENDIX

143

01. Po wer (Comm and: k a )

To control Power On/Off of the TV.

Transmission [k][a][ ][Set ID][ ][Data][Cr]

Data 00: Power Off Data 01: Power On

Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]

* In a like manner, if other functions transmit ‘FF’ data

based on this format, Acknowledgement data feedback
presents status about each function.

* Note: In this model, TV will send the Acknowledge

after power on processing completion.

There might be a time delay between command and
acknowledge.

02. I nput S elec t (Co m mand : x b)

To select input source for TV.

Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data 00: DTV (Antenna) Data 01: DTV (Cable)

Data 10: Analog (Antenna) Data 11: Analog (Cable)

Data 20: AV1 Data 21: AV2

Data 40: Component1 Data 41: Component 2

Data 60: RGB-PC Data 90: HDMI1

Data 91: HDMI2 Data 92: HDMI3

Data 93: HDMI4

Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

03. A spec t Rati o (Co m mand : k c)

To adjust the screen format.

Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01: 4:3 09: Just scan

02: 16:9 10: Cinema Zoom1

04: Zoom

06: Set by program 1F: Cinema Zoom16

Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

04. Sc reen M ute (Com m and: k d)

To select screen mute on/off.

Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00: Screen mute off (Picture on), Video-out Mute off

Data 01: Screen mute on (Picture off)

Data 10: Video-out Mute on

Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]

* In case of Video-out Mute on only, TV will display On

Screen Display (OSD). But, in case of screen mute on,
TV will not display On Screen Display (OSD).

05. V olum e Mute (Com m and: k e)

To control volume mute on/off.

You can also adjust mute using the MUTE button on
remote control.

Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 00: Volume mute on (Volume off)

Data 01: Volume mute off (Volume on)

Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]

06. V olum e Cont rol (Com m and: k f)

To adjust volume.

You can also adjust volume with the volume buttons on
remote control.

Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]

07. C ontr ast (Comm and: k g )

To adjust screen contrast.

You can also adjust contrast in the PICTURE menu.

Transmission [k][g][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

08. B righ tnes s (Com m and: k h)

To adjust screen brightness.

You can also adjust brightness in the PICTURE menu.

Transmission [k][h][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]

09. C olor ( Comm and: k i )

To adjust screen color.

You can also adjust color in the PICTURE menu.

Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]

10. T int (Com m and: k j)

To adjust screen tint.

You can also adjust tint in the PICTURE menu.

Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]

11. S harp ness ( Comm a nd: k k )

To adjust screen sharpness.

You can also adjust sharpness in the PICTURE menu.

Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]

APPENDIX

144

APPENDIX

12. O SD Se l ect ( C omma nd: k l)

To select OSD (On Screen Display) on/off.

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 00: OSD off Data 01: OSD on

Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]

13. R emot e Con t rol L ock Mode ( Comm a nd: k m )

To lock the remote control and the front panel controls
on the set.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 00: Lock off Data 01: Lock on

Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]

If you’re not using the remote control and front panel
controls on the TV, use this mode. When main power is
on/off, remote control lock is released.

If Key Lock is on in the standby mode, TV will not turn on
by POWER button of remote control and on the TV.

14. T rebl e (Com mand : k r)

To adjust treble.

You can also adjust treble in the AUDIO menu.

Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]

15. Ba s s (Co m mand : k s)

To adjust bass.

You can also adjust bass in the AUDIO menu.

Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

16. B alan ce (Co mman d : k t)

To adjust balance.

You can also adjust balance in the AUDIO menu.

Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

17. C olor Temp e ratu re (Co mman d: k u)

To adjust color temperature.

You can also adjust color temperature in the PICTURE menu.

Transmission [k][u][ ][Set ID][ ][Data][Cr]

Data 00: Medium 01: Cool 02: Warm

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

18. I SM Me t hod ( Comma nd: j p)

(For Plasma TV)

To avoid having a fixed image remain on screen.

Transmission [ j ][p][ ][Set ID][ ][Data][Cr]

Data 02: Orbiter 04: White Wash

08: Normal 20: Color Wash

Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]

19. E nerg y Savi ng (C o mman d: j q)

To control the energy saving function.

Transmission [ j ][q][ ][Set ID][ ][Data][Cr]

Data 00: Energy saving - off

01: Energy saving - Minimum

02: Energy saving - Medium

03: Energy saving - Maximum

04: Energy saving - Auto

05: Energy saving - Screen off

10: Intelligent Sensor - Low

11: Intelligent Sensor - Middle

12: Intelligent Sensor - High

Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]

20. A uto C onfi g urat ion (Comm and: j u)

To adjust picture position and minimize image shaking
automatically. Auto configuration only works in RGB-PC
mode.

Transmission [ j ][u][ ][Set ID][ ][Data][Cr]

Data 01: To set

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

21. C hann el Tun ing (Com m and: m a)

To tune channel to following physical/major/minor number.

Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]

[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

Digital channels have a Physical, Major, and Minor channel
number. The Physical number is the actual digital channel
number, the Major is the number that the channel should
be mapped to, and the Minor is the sub-channel. Since
the ATSC tuner automatically maps the channel to the
Major number, the Physical number is not required when
sending a command.

Data 00: Physical Channel Number

NTSC air: 02~45, NTSC cable: 01, 0E~7D
ATSC air: 01~45, ATSC cable: 01~87

Data 01 & 02: Major Channel Number

Data 01: High byte Data 02: Low byte

Two bytes are available for the Major and Minor, nor­mally only the second byte is used.

Data 03 & 04: Minor Channel Number

Not needed for NTSC.

For LCD TV

For Plasma TV

APPENDIX

145

Data5:

The table above lists the binary code which must be
converted to Hexadecimal before sending. For example:
The binary code to tune the sub source to an NTSC
cable channel is “1000 0001”, which translates to “81”
in Hex.

* 7th bit : For which source do you want to change the

channel.

* 6th bit: Use a two part or one part channel. Most cases

just use 0 since it’s ignored when using NTSC.

* 5th bit: Use 0 with NTSC since it can only use the phys-

ical channel number. Normally use 1 for ATSC since most
times it doesn’t matter what the physical number is.

* 4th bit: Set to 0.

* 3-0 bits: Choose signal type.

* Tune Command Examples:

1. Tune to the analog (NTSC) cable channel 35.

Data 00 = Physical of 35 = 23

Data 01 & 02 = No Major = 00 00

Data 03 & 04 = No Minor = 00 00

Data 05 = 0000 0001 in binary = 01

Total = ma 00 23 00 00 00 00 01

2. Tune to the digital (ATSC) local channel 30-3.

Data 00 = Don’t know Physical = 00

Data 01 & 02 = Major is 30 = 00 1E

Data 03 & 04 = Minor is 3 = 00 03

Data 05 = 0010 0010 in binary = 22

Total = ma 00 00 00 1E 00 03 22

Acknowledgement[a][ ][Set ID][ ][OK][Data00][Data01]
[Data02][Data03][Data04][x][a][ ][Set ID]

[ ][NG][Data00][x]

22. C hann el Add /Del ( Comm and: m b)

To add and delete the channels.

Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00: Channel Delete Data 01: Channel Add

Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

23. K ey (C o mman d : m c)

To send IR remote control code.

Transmission [m][c][ ][Set ID][ ][Data][Cr]

See page 115.

Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

When TV is in the standby mode, TV will turn on by
POWER button of remote control only.

24. B ackl ight ( Comm a nd: m g )

(For LCD TV)

To adjust screen backlight.

Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

Step

NTSC Air

NTSC Cable

ATSC Air

ATSC Cable_std

ATSC Cable_hrc

ATSC Cable_irc

ATSC cable_auto

Reserved

...

Reserved

1

0

0

1

1

0

0

1

1

x

1

2

0

0

0

0

1

1

1

1

x

1

3

0

0

0

0

0

0

0

0

x

1

4

x

x

x

x

x

x

x

x

x

x

Reserved

5

01Use

No Use

Using Physical
Channel

6

01Tw o

One

Two/One
Part Channel

7

01Main

Sub

Main/Sub
Picture

0

0

1

0

1

0

1

0

1

x

1

APPENDIX

146

OPEN SOURCE LICENSE

APPENDIX

Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51
Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

Everyone is permitted to copy and distribute verbatim copies of
this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share
and change free software - to make sure the software is free for
all its users. This General Public License applies to most of the
Free Software Foundation's software and to any other program
whose authors commit to using it. (Some other free software
foundation software is covered by the GNU Lesser General Public
License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that
you have the freedom to distribute copies of free software (and
charge for this service if you wish), that you receive source code
or can get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know you can
do these things.

To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the
rights. These restrictions translate to certain responsibilities for
you if you distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get
the source code. And you must show them these terms so they
know their rights.

We protect your rights with two steps: (1) copyright the soft­ware, and (2) offer you this license which gives you legal permis­sion to copy, distribute and/or modify the software.

Also, for each author's protection and ours, we want to make cer­tain that everyone understands that there is no warranty for this
free software. If the software is modified by someone else and
passed on, we want its recipients to know that what they have is
not the original, so that any problems introduced by others will
not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making

the program proprietary. To prevent this, we have made it clear
that any patent must be licensed for everyone's free use or not
licensed at all.

The precise terms and conditions for copying, distribution and
modification follow.

GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION

0. This license applies to any program or other work which con­tains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The
"Program", below, refers to any such program or work, and a
"work based on the Program" means either the Program or any
derivative work under copyright law: that is to say, a work con­taining the Program or a portion of it, either verbatim or with
modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the
term "modification".) Each licensee is addressed as "you".

Activities other than copying, distribution and modification
are not covered by this license; they are outside its scope.
The act of running the Program is not restricted, and the out­put from the program is covered only if its contents constitute
a work based on the program (independent of having been
made by running the program). Whether that is true depends
on what the program does.

1. You may copy and distribute verbatim copies of the program's
source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this license and to the
absence of any warranty; and give any other recipients of the
program a copy of this license along with the Program.

You may charge a fee for the physical act of transferring a
copy, and you may at your option offer warranty protection in
exchange for a fee.

2. You may modify your copy or copies of the program or any
portion of it, thus forming a work based on the Program, and
copy and distribute such modifications or work under the
terms of section 1 above, provided that you also meet all of
these conditions:

a) You must cause the modified files to carry prominent

notices stating that you changed the files and the date of
any change.

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

APPENDIX

147

b) You must cause any work that you distribute or publish,

that in whole or in part contains or is derived from the
Program or any part there of, to be licensed as a whole at
no charge to all third parties under the terms of this
license.

c) If the modified program normally reads commands interac-

tively when run, you must cause it, when started running
for such interactive use in the most ordinary way, to print
or display an announcement including an appropriate
copyright notice and a notice that there is no warranty (or
else, saying that you provide a warranty) and that users
may redistribute the program under these conditions, and
telling the user how to view a copy of this license.
(Exception: if the Program itself is interactive but does not
normally print such an announcement, your work based on
the Program is not required to print an announcement.)

These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and
separate works in themselves, then this license, and its terms,
do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as
part of a whole which is a work based on the Program, the dis­tribution of the whole must be on the terms of this license,
whose permissions for other licensees extend to the entire
whole, and thus to each and every part regardless of who
wrote it.

Thus, it is not the intent of this section to claim rights or con­test your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of
derivative or collective works based on the program.

In addition, mere aggregation of another work not based on
the program with the Program (or with a work based on the
program) on a volume of a storage or distribution medium
does not bring the other work under the scope of this license.

3. You may copy and distribute the program (or a work based on
it, under section 2) in object code or executable form under
the terms of sections 1 and 2 above provided that you also
do one of the following:
a) Accompany it with the complete corresponding machine-

readable source code, which must be distributed under the
terms of sections 1 and 2 above on a medium customarily
used for software interchange; or,

b) Accompany it with a written offer, valid for at least three

years, to give any third party, for a charge no more than
your cost of physically performing source distribution, a
complete machine-readable copy of the corresponding
source code, to be distributed under the terms of sections
1 and 2 above on a medium customarily used for software
interchange; or,

c) Accompany it with the information you received as to the

offer to distribute corresponding source code. (This alter­native is allowed only for noncommercial distribution and
only if you received the program in object code or exe­cutable form with such an offer, in accord with Subsection
b above.)

The source code for a work means the preferred form of the
work for making modifications to it. For an executable work,
complete source code means all the source code for all mod­ules it contains, plus any associated interface definition files,
plus the scripts used to control compilation and installation
of the executable. However, as a special exception, the source
code distributed need not include anything that is normally
distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating
system on which the executable runs, unless that component
itself accompanies the executable.

If distribution of executable or object code is made by offer­ing access to copy from a designated place, then offering
equivalent access to copy the source code from the same
place counts as distribution of the source code, even though
third parties are not compelled to copy the source along with
the object code.

4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this license. Any attempt
otherwise to copy, modify, sublicense or distribute the
Program is void, and will automatically terminate your rights
under this license. However, parties who have received copies,
or rights, from you under this license will not have their licens­es terminated so long as such parties remain in full compli­ance.

5. You are not required to accept this license, since you have not
signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works.
These actions are prohibited by law if you do not accept this
license. Therefore, by modifying or distributing the program
(or any work based on the program), you indicate your accep­tance of this license to do so, and all its terms and conditions
for copying, distributing or modifying the program or works
based on it.

6. Each time you redistribute the program (or any work based on
the Program), the recipient automatically receives a license
from the original licensor to copy, distribute or modify the
Program subject to these terms and conditions. You may not
impose any further restrictions on the recipients' exercise of
the rights granted herein. You are not responsible for enforc­ing compliance by third parties to this license.

APPENDIX

148

APPENDIX

7. If, as a consequence of a court judgment or allegation of
patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by
court order, agreement or otherwise) that contradict the con­ditions of this license, they do not excuse you from the con­ditions of this license. If you cannot distribute so as to satis­fy simultaneously your obligations under this license and any
other pertinent obligations, then as a consequence you may
not distribute the program at all. For example, if a patent
license would not permit royalty-free redistribution of the
program by all those who receive copies directly or indirectly
through you, then the only way you could satisfy both it and
this license would be to refrain entirely from distribution of
the program.

If any portion of this section is held invalid or unenforceable
under any particular circumstance, the balance of the section
is intended to apply and the section as a whole is intended to
apply in other circumstances.

It is not the purpose of this section to induce you to infringe
any patents or other property right claims or to contest valid­ity of any such claims; this section has the sole purpose of
protecting the integrity of the free software distribution sys­tem, which is implemented by public license practices. Many
people have made generous contributions to the wide range
of software distributed through that system in reliance on
consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute
software through any other system and a licensee cannot
impose that choice.

This section is intended to make thoroughly clear what is
believed to be a consequence of the rest of this license.

8. If the distribution and/or use of the program is restricted in
certain countries either by patents or by copyrighted inter­faces, the original copyright holder who places the program
under this license may add an explicit geographical distribution
limitation excluding those countries, so that distribution is
permitted only in or among countries not thus excluded. In
such case, this license incorporates the limitation as if written
in the body of this license.

9. The Free Software Foundation may publish revised and/or
new versions of the General Public License from time to time.
Such new versions will be similar in spirit to the present ver­sion, but may differ in detail to address new problems or con­cerns.

Each version is given a distinguishing version number. If the
program specifies a version number of this license which
applies to it and "any later version", you have the option of
following the terms and conditions either of that version or of

any later version published by the Free Software Foundation.
If the program does not specify a version number of this
license, you may choose any version ever published by the
Free Software Foundation.

10.If you wish to incorporate parts of the program into other free
programs whose distribution conditions are different, write to
the author to ask for permission. For software which is copy­righted by the Free Software Foundation, write to the Free
Software Foundation; we sometimes make exceptions for this.
Our decision will be guided by the two goals of preserving the
free status of all derivatives of our free software and of pro­moting the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLD­ERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS
IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.

12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,
OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE PRO­GRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR LOSSES SUS­TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE
PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

APPENDIX

149

END OF TERMS AND CONDITIONS

How to apply these terms to your new programs

If you develop a new program, and you want it to be of the great­est possible use to the public, the best way to achieve this is to
make it free software which everyone can redistribute and change
under these terms.

To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effective­ly convey the exclusion of warranty; and each file should have at
least the "copyright" line and a pointer to where the full notice is
found.

one line to give the program's name and a brief idea of what it
does.
Copyright (C) <year> <name of author>

This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the license, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty
of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR­POSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public
License along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301 USA.

Also add information on how to contact you by electronic and
paper mail.

If the program is interactive, make it output a short notice like
this when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for
details type ‘show w’. This is free software, and you are welcome
to redistribute it under certain conditions; type ‘show c’ for
details.

The hypothetical commands ‘show w’ and ‘show c’ should show
the appropriate parts of the General Public License. Of course,
the commands you use may be called something other than
‘show w’ and ‘show c’; they could even be mouse-clicks or menu
items-whatever suits your program.

You should also get your employer (if you work as a programmer)
or your school, if any, to sign a “copyright disclaimer” for the pro­gram, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the pro­gram ‘Gnomovision’ (which makes passes at compilers) written by
James Hacker.

signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice

This General Public License does not permit incorporating your
program into proprietary programs. If your program is a subrou­tine library, you may consider it more useful to permit linking pro­prietary applications with the library. If this is what you want to
do, use the GNU Lesser General Public License instead of this
license.

APPENDIX

150

APPENDIX

Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51
Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of
this license document, but changing it is not allowed.

[This is the first released version of the Lesser GPL. It also
counts as the successor of the GNU Library Public License, ver­sion 2, hence the version number 2.1.]

Preamble

The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General
Public Licenses are intended to guarantee your freedom to share
and change free software - to make sure the software is free for
all its users.

This license, the Lesser General Public License, applies to some
specially designated software packages - typically libraries - of
the Free Software Foundation and other authors who decide to
use it. You can use it too, but we suggest you first think careful­ly about whether this license or the ordinary General Public
License is the better strategy to use in any particular case, based
on the explanations below.

When we speak of free software, we are referring to freedom of
use, not price. Our General Public Licenses are designed to make
sure that you have the freedom to distribute copies of free soft­ware (and charge for this service if you wish); that you receive
source code or can get it if you want it; that you can change the
software and use pieces of it in new free programs; and that you
are informed that you can do these things.

To protect your rights, we need to make restrictions that forbid
distributors to deny you these rights or to ask you to surrender
these rights. These restrictions translate to certain responsibilities
for you if you distribute copies of the library or if you modify it.

For example, if you distribute copies of the library, whether gratis
or for a fee, you must give the recipients all the rights that we
gave you. You must make sure that they, too, receive or can get
the source code. If you link other code with the library, you must
provide complete object files to the recipients, so that they can
relink them with the library after making changes to the library
and recompiling it. And you must show them these terms so they
know their rights.

We protect your rights with a two-step method: (1) we copyright
the library, and (2) we offer you this license, which gives you legal
permission to copy, distribute and/or modify the library.

To protect each distributor, we want to make it very clear that
there is no warranty for the free library. Also, if the library is mod­ified by someone else and passed on, the recipients should know
that what they have is not the original version, so that the origi­nal author's reputation will not be affected by problems that
might be introduced by others.

Finally, software patents pose a constant threat to the existence
of any free program. We wish to make sure that a company can­not effectively restrict the users of a free program by obtaining a
restrictive license from a patent holder. Therefore, we insist that
any patent license obtained for a version of the library must be
consistent with the full freedom of use specified in this license.

Most GNU software, including some libraries, is covered by the
ordinary GNU General Public License. This license, the GNU
Lesser General Public License, applies to certain designated
libraries, and is quite different from the ordinary General Public
License. We use this license for certain libraries in order to per­mit linking those libraries into non-free programs.

When a program is linked with a library, whether statically or
using a shared library, the combination of the two is legally
speaking a combined work, a derivative of the original library. The
ordinary General Public License therefore permits such linking
only if the entire combination fits its criteria of freedom. The
Lesser General Public License permits more lax criteria for linking
other code with the library.

We call this license the "Lesser" General Public License because
it does Less to protect the user's freedom than the ordinary
General Public License. It also provides other free software devel­opers Less of an advantage over competing non-free programs.
These disadvantages are the reason we use the ordinary General
Public License for many libraries. However, the Lesser license pro­vides advantages in certain special circumstances.

For example, on rare occasions, there may be a special need to
encourage the widest possible use of a certain library, so that it
becomes a de-facto standard. To achieve this, non-free programs
must be allowed to use the library. A more frequent case is that
a free library does the same job as widely used non-free libraries.
In this case, there is little to gain by limiting the free library to free
software only, so we use the Lesser General Public License.

In other cases, permission to use a particular library in non-free
programs enables a greater number of people to use a large body
of free software. For example, permission to use the GNU C
Library in non-free programs enables many more people to use
the whole GNU operating system, as well as its variant, the
GNU/Linux operating system.

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999

APPENDIX

151

Although the Lesser General Public License is Less protective of
the users' freedom, it does ensure that the user of a program that
is linked with the Library has the freedom and the wherewithal to
run that program using a modified version of the Library.

The precise terms and conditions for copying, distribution and
modification follow. Pay close attention to the difference between
a "work based on the library" and a "work that uses the library".
The former contains code derived from the library, whereas the
latter must be combined with the library in order to run.

GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION

0. This license agreement applies to any software library or other
program which contains a notice placed by the copyright hold­er or other authorized party saying it may be distributed
under the terms of this Lesser General Public License (also
called “this license”). Each license is addressed as "you".

A “library” means a collection of software functions and/or
data prepared so as to be conveniently linked with application
programs (which use some of those functions and data) to
form executables.

The “Library”, below, refers to any such software library or work
which has been distributed under these terms. A “work based
on the Library” means either the Library or any derivative work
under copyright law: that is to say, a work containing the
library or a portion of it, either verbatim or with modifications
and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the
term “modification”.)

“Source code” for a work means the preferred form of the
work for making modifications to it. For a library, complete
source code means all the source code for all modules it con­tains, plus any associated interface definition files, plus the
scripts used to control compilation and installation of the
library.

Activities other than copying, distribution and modification
are not covered by this license; they are outside its scope.
The act of running a program using the Library is not restrict­ed, and output from such a program is covered only if its con­tents constitute a work based on the library (independent of
the use of the Library in a tool for writing it). Whether that is
true depends on what the library does and what the program
that uses the library does.

1. You may copy and distribute verbatim copies of the library's
complete source code as you receive it, in any medium, pro­vided that you conspicuously and appropriately publish on

each copy an appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to this license
and to the absence of any warranty; and distribute a copy of
this license along with the Library.

You may charge a fee for the physical act of transferring a
copy, and you may at your option offer warranty protection in
exchange for a fee.

2. You may modify your copy or copies of the Library or any
portion of it, thus forming a work based on the Library, and
copy and distribute such modifications or work under the
terms of section 1 above, provided that you also meet all of
these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent

notices stating that you changed the files and the date of
any change.

c) You must cause the whole of the work to be licensed at no

charge to all third parties under the terms of this license.

d) If a facility in the modified Library refers to a function or a

table of data to be supplied by an application program that
uses the facility, other than as an argument passed when
the facility is invoked, then you must make a good faith
effort to ensure that, in the event an application does not
supply such function or table, the facility still operates, and
performs whatever part of its purpose remains meaningful.

(For example, a function in a library to compute square roots
has a purpose that is entirely well-defined independent of the
application. Therefore, Subsection 2d requires that any appli­cation-supplied function or table used by this function must be
optional: if the application does not supply it, the square root
function must still compute square roots.)

These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the
library, and can be reasonably considered independent and
separate works in themselves, then this license, and its terms,
do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as
part of a whole which is a work based on the library, the dis­tribution of the whole must be on the terms of this license,
whose permissions for other licenses extend to the entire
whole, and thus to each and every part regardless of who
wrote it.
Thus, it is not the intent of this section to claim rights or con­test your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of
derivative or collective works based on the library.

In addition, mere aggregation of another work not based on
the library with the library (or with a work based on the
library) on a volume of a storage or distribution medium does
not bring the other work under the scope of this license.

APPENDIX

152

APPENDIX

3. You may opt to apply the terms of the ordinary GNU General
Public License instead of this License to a given copy of the
Library. To do this, you must alter all the notices that refer to
this License, so that they refer to the ordinary GNU General
Public License, version 2, instead of to this License. (If a newer
version than version 2 of the ordinary GNU General Public
License has appeared, then you can specify that version
instead if you wish.) Do not make any other change in these
notices.
Once this change is made in a given copy, it is irreversible for
that copy, so the ordinary GNU General Public License applies
to all subsequent copies and derivative works made from that
copy.
This option is useful when you wish to copy part of the code
of the library into a program that is not a library.

4. You may copy and distribute the library (or a portion or deriv­ative of it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you
accompany it with the complete corresponding machine­readable source code, which must be distributed under the
terms of sections 1 and 2 above on a medium customarily
used for software interchange.
If distribution of object code is made by offering access to
copy from a designated place, then offering equivalent access
to copy the source code from the same place satisfies the
requirement to distribute the source code, even though third
parties are not compelled to copy the source along with the
object code.

5. A program that contains no derivative of any portion of the
Library, but is designed to work with the Library by being
compiled or linked with it, is called a “work that uses the
Library”. Such a work, in isolation, is not a derivative work of
the Library, and therefore falls outside the scope of this
license.

However, linking a “work that uses the library” with the Library
creates an executable that is a derivative of the Library
(because it contains portions of the library), rather than a
“work that uses the library”. The executable is therefore cov­ered by this license. Section 6 states terms for distribution of
such executable.

When a “work that uses the library” uses material from a head­er file that is part of the library, the object code for the work
may be a derivative work of the library even though the source
code is not.
Whether this is true is especially significant if the work can be
linked without the library, or if the work is itself a library. The
threshold for this to be true is not precisely defined by law.

If such an object file uses only numerical parameters, data
structure layouts and accessories, and small macros and small
inline functions (ten lines or less in length), then the use of

the object file is unrestricted, regardless of whether it is legal­ly a derivative work. (Executable containing this object code
plus portions of the library will still fall under Section 6.)

Otherwise, if the work is a derivative of the library, you may
distribute the object code for the work under the terms of
Section 6. Any executable containing that work also fall under
Section 6, whether or not they are linked directly with the
library itself.

6. As an exception to the sections above, you may also combine
or link a "work that uses the library" with the library to pro­duce a work containing portions of the library, and distribute
that work under terms of your choice, provided that the terms
permit modification of the work for the customer's own use
and reverse engineering for debugging such modifications.

You must give prominent notice with each copy of the work
that the library is used in it and that the Library and its use
are covered by this license. You must supply a copy of this
license. If the work during execution displays copyright
notices, you must include the copyright notice for the library
among them, as well as a reference directing the user to the
copy of this license. Also, you must do one of these things:

a) Accompany the work with the complete corresponding

machine-readable source code for the library including
whatever changes were used in the work (which must be
distributed under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the complete
machine-readable “work that uses the Library”, as object
code and/or source code, so that the user can modify the
library and then relink to produce a modified executable
containing the modified library. (It is understood that the
user who changes the contents of definitions files in the
library will not necessarily be able to recompile the appli­cation to use the modified definitions.)

b) Use a suitable shared library mechanism for linking with the

library. A suitable mechanism is one that (1) uses at run time
a copy of the library already present on the user’s computer
system, rather than copying library functions into the exe­cutable, and (2) will operate properly with a modified version
of the library, if the user installs one, as long as the modified
version is interface-compatible with the version that the
work was made with.

c) Accompany the work with a written offer, valid for at least

three years, to give the same user the materials specified in
Subsection 6, above, for a charge no more than the cost of
performing this distribution.

d) If distribution of the work is made by offering access to

copy from a designated place, offer equivalent access to
copy the above specified materials from the same place.

e) Verify that the user has already received a copy of these

materials or that you have already sent this user a copy.

APPENDIX

153

For an executable, the required form of the "work that uses
the library" must include any data and utility programs need­ed for reproducing the executable from it. However, as a spe­cial exception, the materials to be distributed need not
include anything that is normally distributed (in either source
or binary form) with the major components (compiler, kernel,
and so on) of the operating system on which the executable
runs, unless that component itself accompanies the exe­cutable.

It may happen that this requirement contradicts the license
restrictions of other proprietary libraries that do not normal­ly accompany the operating system. Such a contradiction
means you cannot use both them and the library together in
an executable that you distribute.

7. You may place library facilities that are a work based on the
library side-by-side in a single library together with other
library facilities not covered by this license, and distribute
such a combined library, provided that the separate distribu­tion of the work based on the Library and of the other library
facilities is otherwise permitted, and provided that you do
these two things:

a) Accompany the combined library with a copy of the same

work based on the Library, uncombined with any other
library facilities. This must be distributed under the terms
of the sections above.

b) Give prominent notice with the combined library of the

fact that part of it is a work based on the library, and
explaining where to find the accompanying uncombined
form of the same work.

8. You may not copy, modify, sublicense, link with, or distribute
the library except as expressly provided under this license.
Any attempt otherwise to copy, modify, sublicense, link with,
or distribute the library is void, and will automatically termi­nate your rights under this license. However, parties who have
received copies, or rights, from you under this license will not
have their licenses terminated so long as such parties remain
in full compliance.

9. You are not required to accept this license, since you have not
signed it. However, nothing else grants you permission to mod­ify or distribute the library or its derivative works. These
actions are prohibited by law if you do not accept this license.
Therefore, by modifying or distributing the library (or any work
based on the library), you indicate your acceptance of this
license to do so, and all its terms and conditions for copying,
distributing or modifying the library or works based on it.

10.Each time you redistribute the library (or any work based on
the Library), the recipient automatically receives a license
from the original licensor to copy, distribute, link with or mod­ify the library subject to these terms and conditions. You may
not impose any further restrictions on the recipients' exercise

of the rights granted herein.
You are not responsible for enforcing compliance by third
parties with this license.

11. If, as a consequence of a court judgment or allegation of
patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by
court order, agreement or otherwise) that contradict the con­ditions of this license, they do not excuse you from the con­ditions of this license. If you cannot distribute so as to satis­fy simultaneously your obligations under this license and any
other pertinent obligations, then as a consequence you may
not distribute the library at all. For example, if a patent license
would not permit royalty-free redistribution of the library by
all those who receive copies directly or indirectly through
you, then the only way you could satisfy both it and this
license would be to refrain entirely from distribution of the
library.
If any portion of this section is held invalid or unenforceable
under any particular circumstance, the balance of the section
is intended to apply, and the section as a whole is intended to
apply in other circumstances.
It is not the purpose of this section to induce you to infringe
any patents or other property right claims or to contest valid­ity of any such claims; this section has the sole purpose of
protecting the integrity of the free software distribution sys­tem which is implemented by public license practices. Many
people have made generous contributions to the wide range
of software distributed through that system in reliance on
consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute
software through any other system and a license cannot
impose that choice.
This section is intended to make thoroughly clear what is
believed to be a consequence of the rest of this license.

12.If the distribution and/or use of the library is restricted in cer­tain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the library under this
license may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted
only in or among countries not thus excluded. In such case,
this license incorporates the limitation as if written in the body
of this license.

13.The Free Software Foundation may publish revised and/or
new versions of the Lesser General Public License from time to
time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the
library specifies a version number of this license which applies
to it and “any later version”, you have the option of following
the terms and conditions either of that version or of any later
version published by the Free Software Foundation.

APPENDIX

154

APPENDIX

If the library does not specify a license version number, you
may choose any version ever published by the Free Software
Foundation.

14.If you wish to incorporate parts of the library into other free
programs whose distribution conditions are incompatible with
these, write to the author to ask for permission. For software
which is copyrighted by the Free Software Foundation, write
to the Free Software Foundation; we sometimes make excep­tions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software
and of promoting the sharing and reuse of software generally.

NO WARRANTY

15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY FOR THE LIBRARY, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLD­ERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS
IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY AND PERFORMANCE OF THE
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.

16.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,
OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR LOSSES SUS­TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE
LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to apply these terms to your new libraries

If you develop a new library, and you want it to be of the great­est possible use to the public, we recommend making it free soft­ware that everyone can redistribute and change. You can do so
by permitting redistribution under these terms (or, alternatively,
under the terms of the ordinary General Public License).

To apply these terms, attach the following notices to the library.
It is safest to attach them to the start of each source file to most
effectively convey the exclusion of warranty; and each file should
have at least the “copyright” line and a pointer to where the full
notice is found.

one line to give the library's name and a brief idea of what it does.
Copyright (C) <year> <name of author>

This library is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as
published by the Free Software Foundation; either version 2.1 of
the license, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty
of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR­POSE. See the GNU Lesser General Public License for more
details.

You should have received a copy of the GNU Lesser General
Public License along with this library; if not, write to the Free
Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
MA 02110-1301 USA

Also add information on how to contact you by electronic and
paper mail.

You should also get your employer (if you work as a programmer)
or your school, if any, to sign a “copyright disclaimer” for the
library, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the
library ‘Frob’ (a library for tweaking knobs) written by James
Random Hacker.

signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice

APPENDIX

155

1.Definitions.

1.0.1. “Commercial use” means distribution or otherwise making
the covered code available to a third party.

1.1. “Contributor” means each entity that creates or con­tributes to the creation of modifications.

1.2. “Contributor version” means the combination of the orig­inal code, prior modifications used by a contributor, and
the modifications made by that particular contributor.

1.3. “Covered code” means the original code or modifications
or the combination of the original code and modifications,
in each case including portions thereof.

1.4. “Electronic distribution mechanism” means a mechanism
generally accepted in the software development communi­ty for the electronic transfer of data.

1.5. “Executable” means covered code in any form other than
source code.

1.6. “Initial developer” means the individual or entity identified
as the initial Developer in the Source Code notice required
by exhibit A.

1.7. “Larger work” means a work which combines covered code
or portions thereof with code not governed by the terms
of this License.

1.8. “License” means this document.

1.8.1. “Licensable” means having the right to grant, to the maxi­mum extent possible, whether at the time of the initial
grant or subsequently acquired, any and all of the rights
conveyed herein.

1.9. “Modifications” means any addition to or deletion from
the substance or structure of either the original code or
any previous modifications. When covered code is
released as a series of files, a modification is:

A. Any addition to or deletion from the contents of a file
containing original code or previous modifications.

B. Any new file that contains any part of the original code
or previous modifications.

1.10. “Original code” means source code of computer software

code which is described in the source code notice
required by exhibit as original code, and which, at the time
of its release under this license is not already covered
code governed by this license.

1.10.1.

“Patent claims” means any patent claim(s), now owned or
hereafter acquired, including without limitation, method,
process, and apparatus claims, in any patent licensable by
grantor.

1.11. “Source code” means the preferred form of the covered
code for making modifications to it, including all modules
it contains, plus any associated interface definition files,
scripts used to control compilation and installation of an
executable, or source code differential comparisons
against either the original code or another well known,
available covered code of the contributor's choice. The
source code can be in a compressed or archival form, pro­vided the appropriate decompression or de-archiving soft­ware is widely available for no charge.

1.12. “You” (or “Your”) means an individual or a legal entity
exercising rights under, and complying with all of the terms
of, this license or a future version of this license issued
under section 6.1.
For legal entities, “You” includes any entity which controls,
is controlled by, or is under common control with You. For
purposes of this definition, “control” means (a) the power,
direct or indirect, to cause the direction or management of
such entity, whether by contract or otherwise, or (b) own­ership of more than fifty percent (50%) of the outstand­ing shares or beneficial ownership of such entity.

2. Source Code License.

2.1. The initial developer grant.
The initial developer hereby grants You a world-wide, roy­alty-free, non-exclusive license, subject to third party intel­lectual property claims:

a) under intellectual property rights (other than patent or

trademark) licensable by initial developer to use, repro­duce, modify, display, perform, sublicense and distrib­ute the original code (or portions thereof) with or with­out modifications, and/or as part of a larger work; and

(b) under patents claims infringed by the making, using or

selling of original code, to make, have made, use, prac­tice, sell, and offer for sale, and/or otherwise dispose
of the original code (or portions there of).

MOZILLA PUBLIC LICENSE

Version 1.1

---------------

APPENDIX

156

APPENDIX

(c) the licenses granted in this section 2.1(a) and (b) are

effective on the date Initial developer first distributes
original code under the terms of this license.

(d) Notwithstanding section 2.1(b) above, no patent

license is granted: 1) for code that You delete from the
original Code; 2) separate from the original code; or

3) for infringements caused by: i) the modification of
the original code or ii) the combination of the original
code with other software or devices.

2.2. Contributor Grant.
Subject to third party intellectual property claims, each
contributor hereby grants You a world-wide, royalty-free,
non-exclusive license

(a) under intellectual property rights (other than patent

or trademark) licensable by contributor, to use,
reproduce, modify, display, perform, sublicense and
distribute the modifications created by such contribu­tor (or portions thereof) either on an unmodified
basis, with other modifications, as covered code
and/or as part of a larger work; and

(b) under patent claims infringed by the making, using, or

selling of modifications made by that contributor
either alone and/or in combination with its contributor
version (or portions of such combination), to make,
use, sell, offer for sale, have made, and/or otherwise
dispose of: 1) modifications made by that contributor
(or portions thereof); and 2) the combination of mod­ifications made by that contributor with its contributor
version (or portions of such combination).

(c) the licenses granted in sections 2.2(a) and 2.2(b) are

effective on the date contributor first makes commer­cial use of the covered code.

(d) Notwithstanding section 2.2(b) above, no patent

license is granted: 1) for any code that contributor has
deleted from the contributor version; 2) separate from
the contributor version; 3) for infringements caused
by: i) third party modifications of contributor version
or ii) the combination of modifications made by that
contributor with other software (except as part of the
contributor version) or other devices; or 4) under
patent claims infringed by covered code in the
absence of modifications made by that contributor.

3. Distribution Obligations.

3.1. Application of license.
The modifications which You create or to which you con­tribute are governed by the terms of this license, including
without limitation section 2.2. The source code version of
covered code may be distributed only under the terms of
this license or a future version of this license released
under section 6.1, and you must include a copy of this
license with every copy of the source code you distribute.

You may not offer or impose any terms on any source code
version that alters or restricts the applicable version of
this license or the recipients' rights hereunder. However,
you may include an additional document offering the
additional rights described in section 3.5.

3.2. Availability of source code.
Any modification which you create or to which you con­tribute must be made available in source code form under
the terms of this license either on the same media as an
executable version or via an accepted electronic distribu­tion mechanism to anyone to whom you made an exe­cutable version available; and if made available via elec­tronic distribution mechanism, must remain available for at
least twelve (12) months after the date it initially became
available, or at least six (6) months after a subsequent
version of that particular modification has been made
available to such recipients. You are responsible for ensur­ing that the source code version remains available even if
the electronic distribution mechanism is maintained by a
third party.

3.3. Description of modifications.
You must cause all covered code to which you contribute to
contain a file documenting the changes You made to create
that covered code and the date of any change. You must
include a prominent statement that the modification is
derived, directly or indirectly, from original code provided by
the initial developer and including the name of the initial
developer in (a) the source code, and (b) in any notice in an
executable version or related documentation in which you
describe the origin or ownership of the covered code.

3.4. Intellectual property matters
(a) Third party claims.
If contributor has knowledge that a license under a third
party's intellectual property rights is required to exercise
the rights granted by such contributor under sections 2.1
or 2.2, contributor must include a text file with the source
code distribution titled "LEGAL" which describes the claim
and the party making the claim in sufficient detail that a
recipient will know whom to contact. If contributor obtains
such knowledge after the modification is made available as
described in section 3.2, contributor shall promptly modi­fy the LEGAL file in all copies contributor makes available
thereafter and shall take other steps (such as notifying
appropriate mailing lists or newsgroups) reasonably calcu­lated to inform those who received the covered code that
new knowledge has been obtained.
(b) Contributor APIs.
If contributor's modifications include an application
programming interface and contributor has knowledge of
patent licenses which are reasonably necessary to implement
that API, contributor must also include this information in
the LEGAL file.

APPENDIX

157

(c) Representations.
contributor represents that, except as disclosed pursuant
to section 3.4(a) above, contributor believes that contributor's
modifications are contributor's original creation(s)
and/or contributor has sufficient rights to grant the rights
conveyed by this license.

3.5. Required notices.
You must duplicate the notice in exhibit A in each file of
the source code. If it is not possible to put such notice in
a particular source code file due to its structure, then You
must include such notice in a location (such as a relevant
directory) where a user would be likely to look for such a
notice. If You created one or more modification(s), you
may add your name as a contributor to the notice
described in exhibit A. you must also duplicate this license
in any documentation for the source code where You
describe recipients' rights or ownership rights relating to
covered code. You may choose to offer, and to charge a
fee for, warranty, support, indemnity or liability obligations
to one or more recipients of covered code. However, you
may do so only on your own behalf, and not on behalf of
the Initial developer or any contributor. You must make it
absolutely clear than any such warranty, support, indemni­ty or liability obligation is offered by you alone, and You
hereby agree to indemnify the Initial developer and every
contributor for any liability incurred by the Initial develop­er or such contributor as a result of warranty, support,
indemnity or liability terms you offer.

3.6. Distribution of executable versions.
You may distribute covered code in executable form only if
the requirements of section 3.1-3.5 have been met for
that covered code, and if you include a notice stating that
the source code version of the covered code is available
under the terms of this license, including a description of
how and where you have fulfilled the obligations of section

3.2. The notice must be conspicuously included in any
notice in an executable version, related documentation or
collateral in which you describe recipients' rights relating
to the covered code. You may distribute the executable
version of covered code or ownership rights under a
license of your choice, which may contain terms different
from this license, provided that you are in compliance with
the terms of this license and that the license for the exe­cutable version does not attempt to limit or alter the recip­ient's rights in the source code version from the rights set
forth in this license. If you distribute the executable ver­sion under a different license you must make it absolutely
clear that any terms which differ from this license are
offered by you alone, not by the Initial developer or any
contributor. You hereby agree to indemnify the initial
developer and every contributor for any liability incurred
by the initial developer or such contributor as a result of
any such terms You offer.

3.7. Larger works.
You may create a larger work by combining covered code
with other code not governed by the terms of this license
and distribute the larger work as a single product. In such
a case, you must make sure the requirements of this
license are fulfilled for the covered code.

4. Inability to comply due to statute or regulation.
If it is impossible for you to comply with any of the terms
of this license with respect to some or all of the covered
code due to statute, judicial order, or regulation then you
must: (a) comply with the terms of this license to the max­imum extent possible; and (b) describe the limitations and
the code they affect. Such description must be included in
the LEGAL file described in section 3.4 and must be
included with all distributions of the source code. Except
to the extent prohibited by statute or regulation, such
description must be sufficiently detailed for a recipient of
ordinary skill to be able to understand it.

5. Application of this license.
This license applies to code to which the initial developer has
attached the notice in exhibit A and to related covered code.

6. Versions of the license.

6.1. New versions.
Netscape communications corporation (“Netscape”) may
publish revised and/or new versions of the license from
time to time. Each version will be given a distinguishing
version number.

6.2. Effect of new versions.
Once covered code has been published under a particular
version of the license, you may always continue to use it
under the terms of that version. You may also choose to
use such covered code under the terms of any subsequent
version of the license published by netscape. No one
other than netscape has the right to modify the terms
applicable to covered code created under this license.

6.3. Derivative works.
If You create or use a modified version of this license
(which you may only do in order to apply it to code which
is not already covered code governed by this license), You
must (a) rename Your license so that the phrases
"Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL",
"NPL" or any confusingly similar phrase do not appear in
your license (except to note that your license differs from
this license) and (b) otherwise make it clear that Your
version of the license contains terms which differ from the
Mozilla Public license and netscape Public License. (Filling
in the name of the initial developer, original code or con­tributor in the notice described in exhibit A shall not of
themselves be deemed to be modifications of this license.)

APPENDIX

158

APPENDIX

7. DISCLAIMER OF WARRANTY.
COVERED CODE IS PROVIDED UNDER THIS LICENSE
ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
WITHOUT LIMITATION, WARRANTIES THAT THE COV­ERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT
FOR A PARTICULAR PURPOSE OR NON-INFRINGING.
THE ENTIRE RISK AS TO THE QUALITY AND PERFOR­MANCE OF THE COVERED CODE IS WITH YOU.
SHOULD ANY COVERED CODE PROVE DEFECTIVE IN
ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR
ANY OTHER CONTRIBUTOR) ASSUME THE COST OF
ANY NECESSARY SERVICING, REPAIR OR CORRECTION.
THIS DISCLAIMER OF WARRANTY CONSTITUTES AN
ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY
COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT
UNDER THIS DISCLAIMER.

8. TERMINATION.

8.1. This license and the rights granted hereunder will terminate
automatically if you fail to comply with terms herein and
fail to cure such breach within 30 days of becoming aware
of the breach. All sublicenses to the covered code which
are properly granted shall survive any termination of this
license. Provisions which, by their nature, must remain in
effect beyond the termination of this license shall survive.

8.2. If you initiate litigation by asserting a patent infringement
claim (excluding declatory judgment actions) against ini­tial developer or a contributor (the initial developer or
contributor against whom you file such action is referred
to as “Participant”) alleging that:

(a) such participant's contributor version directly or indi-

rectly infringes any patent, then any and all rights
granted by such participant to you under sections 2.1
and/or 2.2 of this license shall, upon 60 days notice
from Participant terminate prospectively, unless if within
60 days after receipt of notice you either: (i) agree in
writing to pay participant a mutually agreeable reasonable
royalty for your past and future use of modifications
made by such participant, or (ii) withdraw your litigation
claim with respect to the contributor version against
such participant. If within 60 days of notice, a reasonable
royalty and payment arrangement are not mutually
agreed upon in writing by the parties or the litigation
claim is not withdrawn, the rights granted by partici­pant to you under sections 2.1 and/or 2.2 automati­cally terminate at the expiration of the 60 day notice
period specified above.

(b) any software, hardware, or device, other than such par-

ticipant's contributor Version, directly or indirectly
infringes any patent, then any rights granted to You by

such participant under sections 2.1(b) and 2.2(b) are
revoked effective as of the date you first made, used,
sold, distributed, or had made, modifications made by
that participant.

8.3. If you assert a patent infringement claim against partici­pant alleging that such participant's contributor version
directly or indirectly infringes any patent where such claim
is resolved (such as by license or settlement) prior to the
initiation of patent infringement litigation, then the rea­sonable value of the licenses granted by such participant
under sections 2.1 or 2.2 shall be taken into account in
determining the amount or value of any payment or
license.

8.4. In the event of termination under sections 8.1 or 8.2
above, all end user license agreements (excluding distributors
and resellers) which have been validly granted by you or
any distributor hereunder prior to termination shall survive
termination.

9. LIMITATION OF LIABILITY.
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL
THEORY, WHETHER TORT (INCLUDING NEGLIGENCE),
CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL
DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DIS­TRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF
ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUEN­TIAL DAMAGES OF ANY CHARACTER INCLUDING, WITH­OUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL,
WORK STOPPAGE, COMPUTER FAILURE OR MALFUNC­TION, OR ANY AND ALL OTHER COMMERCIAL DAM­AGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE
BEEN INFORMED OF THE POSSIBILITY OF SUCH DAM­AGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY
TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULT­ING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT
APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAM­AGES, SO THIS EXCLUSION AND LIMITATION MAY NOT
APPLY TO YOU.

10. U.S. GOVERNMENT END USERS.
The covered code is a "commercial item," as that term is
defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of
"commercial computer software" and "commercial computer
software documentation," as such terms are used in 48
C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R.

12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4
(June 1995), all U.S. Government end users acquire cov­ered code with only those rights set forth herein.

APPENDIX

159

11. MISCELLANEOUS.
This license represents the complete agreement concerning
subject matter hereof. If any provision of this license is
held to be unenforceable, such provision shall be reformed
only to the extent necessary to make it enforceable. This
License shall be governed by California law provisions
(except to the extent applicable law, if any, provides oth­erwise), excluding its conflict-of-law provisions. With
respect to disputes in which at least one party is a citizen
of, or an entity chartered or registered to do business in
the united states of america, any litigation relating to this
License shall be subject to the jurisdiction of the federal
courts of the northern district of california, with venue
lying in santa clara county, california, with the losing party
responsible for costs, including without limitation, court
costs and reasonable attorneys' fees and expenses. The
application of the united nations convention on contracts
for the International sale of goods is expressly excluded.
Any law or regulation which provides that the language of
a contract shall be construed against the drafter shall not
apply to this license.

12. RESPONSIBILITY FOR CLAIMS.
As between initial developer and the contributors, each
party is responsible for claims and damages arising, directly
or indirectly, out of its utilization of rights under this
license and you agree to work with initial developer and
contributors to distribute such responsibility on an equitable
basis. Nothing herein is intended or shall be deemed to
constitute any admission of liability.

13. MULTIPLE-LICENSED CODE.
Initial developer may designate portions of the covered
code as "Multiple-Licensed". "Multiple-Licensed" means
that the initial developer permits you to utilize portions of
the covered code under your choice of the NPL or the
alternative licenses, if any, specified by the initial developer
in the file described in exhibit A.

EXHIBIT A -Mozilla Public License.

The contents of this file are subject to the Mozilla Public License
Version 1.1 (the “license”); you may not use this file except in
compliance with the License. You may obtain a copy of the
license at http://www.mozilla.org/MPL/

Software distributed under the license is distributed on an "AS
IS" basis, WITHOUT WARRANTY OF ANY KIND, either express
or implied. See the license for the specific language governing
rights and limitations under the License.

The Original Code is ______________________________________.

The Initial Developer of the Original Code
is___________________.
Portions created by ______________________ are Copyright (C)
_______________________. All Rights Reserved.

Contributor(s): ______________________________________.

Alternatively, the contents of this file may be used under the
terms of the _____ license (the "[___] License"), in which case
the provisions of [______] license are applicable instead of those
above. If you wish to allow use of your version of this file only
under the terms of the [____] license and not to allow others to
use your version of this file under the MPL, indicate your decision
by deleting the provisions above and replace them with the
notice and other provisions required by the [___] license. If you
do not delete the provisions above, a recipient may use your version
of this file under either the MPL or the [___] license."

NOTE: The text of this exhibit A may differ slightly from the text
of the notices in the source code files of the original code. You
should use the text of this exhibit A rather than the text found in
the original code/source code for Your modifications.