LG Electronics USA 50PX5DUB User Manual

54 Plasma TV

TV Guide On Screen

TV Guide On Screen

TM

TM

System

System

Operation

W Once —records the show one time

W Regularly —records the show every time the show

airs on the same channel and starts at the same time

W Weekly —records the show each time the show

airs on the same day of the week, on the same channel

and starts at the same time

W Off (not cancel) —keeps the show in the list but

will not record this show until the frequency is changed.

W Cancel (no icon displayed)—does not record

2) From a Panel Menu

• Highlight a show, and press Menu to display the Episode

Options menu.

• Highlight Set Recording, and press ENTER to display the

Record Options menu.

• Highlight the Frequency option, and use the left and right

arrows to choose among Once, Regularly, Weekly, and Off,

as previously described.

• Recorder choice: Please choose the VCR only. This TV does

not support other devices with a recording feature.

Note: Video Window Lock is switched to on or off using PIP

button in Listings mode.

You can set a show to Record in Listings, Search, and

Schedule or change Record settings for a show in Schedule.

There are 3 ways to set a show to Record:

1) Using the Record Button on the Remote

• Press the Record button on the remote to record the show

Once with current default settings (Start and End recording

On Time). Each time you press the Record button, you

change the record frequency (but not the default settings)

among Once (default), Regularly, Weekly, Off, and then

Cancel.

Note: The proper Record icon appears on the show tile, as

the Record button is pressed.

Record

Record

Record And Remind Features

Owner’s Manual 55

Operation

When finished, press ENTER to highlight Schedule Recording.

Press ENTER again to close the menu. You see a Record icon for

the selected frequency next to the show title.

Highlight Cancel to close the menu, change no information, and

return to the highlighted show.

3) Manual Recording

• Highlight the Schedule Service label, and press Menu to display

the Schedule Options menu.

• Use the

D / E

/ F / G

buttons to move through the options. Use

the number or the

D / E

/ F / G

buttons to change the informa-

tion, as necessary.

• Highlight New Manual Recording and press ENTER to display

the Record Options menu.

• Current information (i.e., date, start and end times, channel,

input) is displayed.

• Recorder choice: Please choose the VCR only. This TV does

not provide other devices with a recording feature.

56 Plasma TV

Operation

TV Guide On Screen

TV Guide On Screen

TM

TM

System

System

• Use the left and right arrows to choose between Once, Daily,

Weekly, and Off, as follows.

W Once —records the time, channel, input, recorder combi

nation one time.

W Daily —records the time, channel, input,recorder combi

nation Monday through Friday.

W Weekly —records the time, channel, input, recorder

combination once a week on this selected day of the week

W Off (not cancel) —keeps the time, channel, input, recorder

combination in the list without recording until the frequency is

changed.

Record Conflict

A conflict message appears for the following reasons:

• a show set to Record overlaps with any part of another show pre-

viously set to Record,

• a show set to Record overlaps with a show previously set to auto-

tune

Select one of these options:

W record anyway - this show will override an existing show set to

Record or auto-tune

W don't record this show - cancel the Recording

Before a recording begins, a notification screen appears

if your TV is On. At that time, you can choose to start or

cancel recording. If the TV is not On, the recording

occurs as scheduled. If there is no activity for 3 minutes,

the notification screen automatically closes and com-

pletes the highlighted item.

When finished, press ENTER to highlight Schedule

Recording.

Press ENTER again to close the menu. You see a

Record icon for the selected frequency next to the show

title.

Note: Manual recording is listed by channel number.

Highlight Cancel to close the menu, change no informa-

tion, and return to the highlighted show.

Owner’s Manual 57

Operation

You can set a show to Reminder in Listings, Search, and

Schedule or change Reminder settings for a show in Schedule.

There are 2 ways to set a show to Reminder:

1) From a Panel Menu

• Highlight a show, and press Menu to display the Episode

Options menu.

• Highlight Set Reminder, and press ENTER to display the Remind

Options menu.

• Highlight the Frequency option, and use the left and right arrows

to choose between:

W Once —sets a show reminder one time

W Regularly —sets a show reminder every time the show

airs on the same channel and starts at the same time

W Weekly —sets a show reminder each time the show airs

on the same day of the week, on the same channel and starts

at the same time

W Off —keeps the show in the list but will not remind until

the frequency is changed

• Power On the TV, if Off, when a Reminder is scheduled. Choices

are Yes and No. (Default = No)

• Automatically tune the TV to the channel (TV must be On), when

a Reminder is scheduled. Choices are Yes and No. (Default =

No)

• When to display the reminder screen. Choices are 30 seconds

to 15 minutes early, to 30 seconds to 15 minutes late, to On time.

(Default = 1 min early)

When finished, press ENTER to highlight Schedule Reminder.

Press ENTER again to close the menu. You see a Remind icon for

the selected frequency next to the show title.

Highlight Cancel to close the menu, change no information, and

return to the highlighted show.

Remind

Remind

58 Plasma TV

Operation

TV Guide On Screen

TV Guide On Screen

TM

TM

System

System

2) Manual Reminder

• Highlight the Schedule Service label, and press the Menu key to

display the Schedule Options menu.

• Use the

D / E

/ F / G

buttons to move through the options. Use

the number or

D / E

/ F / G

buttons to change the information, as

necessary.

• Highlight New Manual Reminder and press the ENTER key to dis-

play the Remind Options menu.

• Current information (i.e., date, start and end times, channel, input,

frequency, etc.) is displayed.

• Highlight the Frequency option, and use the

F / G buttons to

choose among Once, Daily, Weekly, and Off, as follows.

W Once —sets a show reminder for the time, channel, input,

recorder combination one time

W Daily —reminds for the time, channel, input, recorder com-

bination Monday through Friday

W Weekly —sets a show reminder for the time, channel, input,

recorder combination once a week on this selected day of the

week

W Off (not cancel) —keeps the time, channel, input, destina-

tion combination in the list without reminding until the frequency

is changed

• Power On the TV, if Off, when a Reminder is scheduled. Choices

are Yes and No (Default =No).

• Automatically tune the TV to the channel (TV must be On), when

a Reminder is scheduled. Choices are Yes and No (Default = No).

When finished, press ENTER to highlight Schedule Reminder.

Press ENTER again to close the menu. You see a Remind icon for

the selected frequency next to the show title.

Note: Manual reminder is listed by channel number.

Highlight Cancel to close the menu, change no information, and

return to the highlighted show.

Owner’s Manual 59

Operation

Based on your option settings, a notification screen will

appear, if your TV is On at the reminder time. You can

then choose to hide the reminder, or highlight the show,

and press ENTER to tune to the show. If there is no activ-

ity for 3 minutes, the notification screen automatically

closes and completes the highlighted item (hide

reminders).

If you choose Hide Reminders, the window closes for the

show or shows, but does not affect other Reminders you

set.

Note: If more than 2 reminders are set for the same time,

arrows appear on the Reminder screen. Use the

D/E

buttons to view the shows.

Remind Conflict

A conflict message appears for the following reasons:

• a show set with an Auto-Tune Reminder has the same

start time as an existing Auto-Tune Reminder.

• If you are using a cable box, a show set with an Auto-

Tune Reminder overlaps with a Recording already

scheduled.

Select one of these options:

W auto-tune anyway - this show will override an existing

show set to auto-tune

W proceed, no auto-tune - set the show as a Reminder

but do not auto-tune

W don't set this reminder - cancel the Reminder

60 Plasma TV

Operation

1. First, connect power cord correctly. At this moment, the TV switches to standby mode.

In standby mode to turn TV on, press the ,TV/VIDEO , CH (

D/E

) button on the TV or press

the POWER, TV/VIDEO, TV INPUT, CH (

D/E

), Number (0 ~ 9) button on the remote control.

Notes:

• If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

• After turning on the TV, it will take up to a week for the TV Guide On Screen system to receive full

• listings data.

• Illuminates orange in standby mode. When the TV is turned on, the indicator will blink green for 3-4

• seconds before the picture is seen.

• When the power turns on, the screen of TV Guide is automatically showed. In case the prior condi•

• tion turns on putting again after the power code puts out in conditon turning on power, the screen of

• TV Guide is showed a little bit late.

2. Select the viewing source by using TV/VIDEO, TV INPUT button on the remote control.

This TV is programmed to remember which mode it was last set to, even if you turn the TV off.

3. When finished using the TV, press the POWER button on the remote control. The TV reverts to

standby mode.

Operation

Operation

TTurning the TV On

urning the TV On

* In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an

example to help you with the TV operation.

Owner’s Manual 61

Operation

- The menus can be shown on the screen in the selected language. First select your language.

1. Press the MENU button and then use

D/E

button to select the OPTION

menu.

2. Press the

GG button and then use

D/E

button to select Language.

3. Press the

G button and then use

D/E

button to select your desired
language.
From this point on, the on-screen menus will be shown in the selected
language.

4. Press EXIT button to return to TV viewing or press MENU button to return to

the previous menu.

TV Setup

TV Setup

On-screen Menus Language Selection

On-screen Menus Language Selection

62 Plasma TV

Operation

- Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.

- Run EZ Scan again after any Antenna/Cable connection changes.

- A password is required to gain access to EZ Scan menu if the Lock System is turned on.

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select EZ Scan.

3. Press the ENTER button to begin the channel search.

Allow EZ Scan to complete the channel search cycle for ANTENNA, and CABLE.

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select Manual Scan.

3. Press the

G button and then use

D / E

button to select TV, DTV, CATV, and

CADTV.

4. Press the

G button and then use

D / E

button to select channel number you

want to add or delete.

5. Press the ENTER button to add or delete for the channel number.

6. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Notes:

• This channel number is a physical channel number, which is different from the normal channel number shown in Channel

Edit.

• When a cable box connects to the physical channel 2,3 or 4 in the TV Guide On Screen system Setup, cable chan-

nels(CATV or CADTV) will not be scanned by EZ Scan or Manual Scan.

• When inserting the CableCARD

TM

, CATV, CADTV is not working in Manual Scan.

• TV: analog antenna(over-the-air) TV signal

DTV: digital antenna(over-the-air) TV signal

CATV: analog cable TV signal

CADTV: digital cable TV signal

EZ Scan (Channel Search)

EZ Scan (Channel Search)

Setup Menu Options

Setup Menu Options

Manual Scan

Manual Scan

- A password is required to gain access to Manual Scan menu if the Lock System is turned on.

Owner’s Manual 63

Note:

• When a cable box connects to the physical channel 2, 3, or 4 in TV Guide On Screen Setup, cable channels(CATV or

CADTV) will not be editable by Channel Edit. Instead, use the cable box's Channel Edit if available.

Operation

- Create two different types of channel lists in memory: “Custom List” and
“Favorite List” from the default channel list created from the EZ Scan channel
search.

- A Custom List can be created by toggling each channel on or off with ENTER
button. The channels in the Custom List are displayed in black color, and the
channels deleted from the Custom List are displayed in gray color. Once a
channel is highlighted you can add or delete the channel by referring to the
small window at the top-left corner of the screen.You can create your own
Favorite List. Use the FAV button on the remote control when a channel is
highlighted and then you can add or delete the channel to/from the Favorite
List.

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select Channel Edit.

3. Press the

G button. You will now see a screen filled with channel numbers and

a preview picture.

4. Use

D / E

/ F / G

button to select a channel and then use the ENTER button to

add or delete it. Press FAV button to add the channel to the Favorite List.

5. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Channel Edit

Channel Edit

- Shows DTV signal levels which are received to your TV whether you need to adjust your antenna or digital
cable input. The higher the signal strength, the less likely you are to experience picture degradation.

- DTV Signal: Only when the input signal is DTV or CADTV, this function is available.

DTV Signal Strength

DTV Signal Strength

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select DTV Signal.

3. View the on-screen signal strength monitor to see the quality of the signal being

received.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

64 Plasma TV

Operation

- Change the picture source so you can watch your TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select Main Input.

3. Press the

G button and then use

D / E

button to select the source: Antenna,
Cable, Video, Front Video, Component1, Component2, RGB-DTV (or RGB-PC),
HDMI1/DVI or HDMI2.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Note:

• To toggle RGB-DTV and RGB-PC, select RGB-DTV(or RGB-PC) and press

G

button.

Main Picture Source Selection

Main Picture Source Selection

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select Input Label.

3. Press the

G button and then use

D / E

button to select the source: Video, Front

Video, Component1, Component2, RGB, HDMI1/DVI or HDMI2.

4. Press the

F / G button to select the label.

5. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Input Label

Input Label

- Choose preset labels for your channels.

- If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel ­even if you didn't preset a label for the channel.

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select Channel Label.

3. Press the

G button. You will now see a screen filled with Labels and a preview screen.

4. Use the CH

D/E

button to select a channel to Label.

5. Use

D / E

/ F / G

button to select the appropriate label for the channel, then press ENTER button to set the Label to

the selected channel.

- If you press ENTER button in TV viewing mode, you will see the channel banner. • For example:

Channel Label Setup

Channel Label Setup

DTV 2-0

CNN

DOLBY DIGITAL

HD

- Sets a label to each input source or lets you skip the input source which is not

in use when you press TV/VIDEO button.

Setup Menu Options

Setup Menu Options

Owner’s Manual 65

- Use to quickly reset all the Video menu options to their original factory preset
values.

1. Press the MENU button and then use

D / E

button to select the VIDEO menu.

2. Press the

G button and then use

D / E

button to select Video Reset .

3. Press the

G button to reset the Video menu options to original values.

VVideo Reset

ideo Reset

Operation

- Adjust the picture appearance to suit your preference and viewing situations.

1. Press the MENU button and then use

D / E

button to select the VIDEO menu.

2. Press the

G button and then use

D / E

button to select the desired picture option

(

Contrast, Brightness, Color, Sharpness, or Tint ).

3. Press the

G button and then use F / G button to make appropriate adjustments.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

1. Press the EZ PIC button repeatedly to select the picture appearance setup option as shown below:

Custom (your own settings), Daylight, Normal, Night Time, Movie, Video Game, and Sports.

• You can also use the

VIDEO menu to adjust EZ Picture.

2. Press the EXIT button to save and return to TV viewing or press MENU button to return to the previous menu.

EZ Picture

EZ Picture

Manual Picture Control (

Manual Picture Control (Custom

option)

option)

- Choose one of three automatic color adjustments. Set to warm to enhance hotter
colors such as red, or set to cool to see less intense colors with more blue.

1. Press the MENU button and then use

D / E

button to select the VIDEO menu.

2. Press the

G button and then use

D / E

button to select Color Temperature .

3. Press the

G button and then use

D / E

button to select either Cool, Medium or

Warm.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Color

ColorTT

emperature Control

emperature Control

- EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the
program category.

- When adjusting Video menu options (contrast, brightness, color, sharpness, tint, and color temperature) manually, EZ
Picture automatically changes to Custom.

-

Daylight, Normal, Night Time, Movie, Video Game, and Sports settings are preset for optimum picture quality at

the factory and are not adjustable.

VVideo Menu Options

ideo Menu Options

66 Plasma TV

Operation

- Other languages may be available if a digital signal is provided by the broad­casting station.

1. Press the EZ SOUND button repeatedly to select the appropriate sound setup as shown below:

Custom (your own settings), Normal, Stadium, News, Music, and Theater.

• You can also adjust

EZ Sound in the AUDIO menu.

2. Press EXIT button to save and return to TV viewing or press MENU button to return to the previous

menu.

EZ Sound

EZ Sound

1. Press the MENU button and then use

D / E

button to select the AUDIO menu.

2. Press the

G button and then use

D / E

button to select the desired sound option

(

Balance, Treble, or Bass).

3. Press the

G button and then use F / G button to make appropriate adjustments.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Manual Sound Control (

Manual Sound Control (Custom

option)

option)

1. Press the MENU button and then use

D / E

button to select the AUDIO menu.

2. Press the

G button and then use

D / E

button to select Audio Language.

3. Press the

G button and then use

D / E

button to select: English, Spanish, or

French.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

- EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound
options based on the program content.

- When adjusting sound options (treble, bass, and front surround) manually, EZ Sound automatically switches to

Custom.

-

Normal, Stadium, News, Music, and Theater are preset for good sound quality at the factory and are not adjustable.

- Scans for changes in sound level during commercials, then adjusts the sound
to match the specified audio level. EZ SoundRite makes sure that the volume
level remains consistent whether you are watching a commercial or a regular
TV program.

1. Press the MENU button and then use

D / E

button to select the AUDIO menu.

2. Press the

G button and then use

D / E

button to select EZ SoundRite.

3. Press the

G button and then use

D / E

button to select On or Off.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

EZ SoundRite

EZ SoundRite

- Adjust the sound to suit your taste and room situations.

Audio Language

Audio Language

Audio Menu Options

Audio Menu Options

Owner’s Manual 67

1. Press the MENU button and then use

D / E

button to select the AUDIO menu.

2. Press the

G button and then use

D / E

button to select TV Speaker.

3. Press the

G button and then use

D / E

button to select On or Off.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

TV Speakers On/Of

TV Speakers On/Of

f Setup

f Setup

- Turn TV speakers off if using external audio equipment. Feature turns the TV
Speakers option On or Off.

Operation

1. Press the MENU button and then use

D / E

button to select the AUDIO menu.

2. Press the

G button and then use

D / E

button to select Front Surround.

3. Press the

G button and then use

D / E

button to select Off, 3D EchoSound

System

or SRS (Sound Retrieval System) TruSurround XT..

•

3D EchoSound System

Creates a stunning simulated stereo effects from any mono sound and a real­istic three-dimensional sound with a very wide and deep sound stage into
stereo sound.

• SRS TruSurround XT

Takes advantage of any multi-channel format without needing to add extra
speakers or equipment. Dialog clarity, bass enrichment, and the addition of
stereo audio enhancement that produces an immersive sound experience from
standard stereo material.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Front Surround

Front Surround

- is a trademark of SRS Labs, Inc.

- TruSurround XT technology is incorporated under license from SRS Labs, Inc.

- Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

68 Plasma TV

Operation

1. Use the SAP button to select your desired MTS mode in a analog signal. Each time you press the SAP button, Mono,

Stereo, or SAP appear in turn.

• If other languages are available on the digital signal, select them with the SAP button.

2. Press EXIT button to save and return to TV viewing.

Stereo/SAP

Stereo/SAP

Broadcasts Setup

Broadcasts Setup

- This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program; if
the station transmits an additional sound signal as well as the original one.

- When having selected Stereo or SAP button on the remote control, this TV can only receive the signal when the TV station
transmits the proper signals.

- Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.

- Select Mono if you want to listen to mono sound during stereo/SAP broadcasting.

- Stereo or SAP can be received in a Analog channel.

1. Press the MENU button and then use

D / E

button to select the AUDIO menu.

2. Press the

G button and then use

D / E

button to select BBE.

3. Press the

G button and then use

D / E

button to select On or Off.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

BBE

BBE

- BBE High Definition Sound restores clarity and presence for better speech
intelligibility and music realism.

• Manufactured under license from BBE Sound, Inc.

• Treble, Bass or BBE aren’t suitable for

SRS TSXT mode.

Audio Menu Options

Audio Menu Options

Owner’s Manual 69

Operation

- Timer function operates only if the current time has been set.

- Off-Timer function overrides On-Timer function if they are both set to the same time.

- The TV must be in standby mode for the On-Timer to work.

- If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to
standby mode.

On/Of

On/OfffTT

imer Setup

imer Setup

1. Press the MENU button and then use

D / E

button to select the TIME menu.

2. Press the

G button and then use

D / E

button to select Off Timer or On Timer.

3. Press the G button and then use

D / E

button to select On.

• To cancel

On/Off timer function, select Off.

4. Press the

G button and then use

D / E

button to set the hour.

5. Press the

G button and then use

D / E

button to set the minutes.

6. For only

On timer function

Press the

G

button and then use

D / E

button to select the channel at turn-on.

Press the

G button and then use

D / E

button to set the sound level at turn-on.

7. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

- The time is set automatically from a digital channel signal.

- The digital channel signal includes information for the current time provided by the broadcasting station.

- Set the clock manually, if the current time is set incorrectly by the auto clock function.

- When you set up TV Guide On Screen System,

Auto Clock menu is not selected.

1. Press the MENU button and then use

D / E

button to select the TIME menu.

2. Press the

G button and then use

D / E

button to select Auto Clock.

3. Press the

G button and then use

D / E

button to select On or Off.

4. Press the

G button and then use

D / E

button to select your viewing area time

zone:

Eastern, Central, Mountain, Pacific, Alaska, or Hawaii.

5. Press EXIT button to return to TV viewing or press MENU button to return to

the previous menu.

- If current time setting is wrong, reset the clock manually.

- When you set up TV guide on screen system,

Manual Clock menu is not

selected.

1. Press the MENU button and then use

D / E

button to select the TIME menu.

2. Press the

G button and then use

D / E

button to select Manual Clock.

3. Press the

G button and then use F / G button to select either the year, date, or

time option. Once selected, use the

D / E

button to set the year, date, and time

options.

4. Press EXIT button to return to TV viewing or press MENU button to return to

the previous menu.

Auto Clock Setup

Auto Clock Setup

Manual Clock Setup

Manual Clock Setup

TTime Menu Options

ime Menu Options

70 Plasma TV

Operation

Auto Of

Auto Offf

- If set to on and there is no input signal, the TV turns off automatically after 10
minutes.

1. Press the MENU button and then use

D / E

button to select the TIME menu.

2. Press the

G button and then use

D / E

button to select Auto Off.

3. Press the

G button and then use

D / E

button to select On or Off.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Sleep

SleepTT

imer

imer

- The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off.

- You can also set up the Sleep Timer in the TIME menu.

1. Press the TIMER button repeatedly to select the number of minutes. First the

Off option appears on the screen,

followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes.

2. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to

count down from the number of minutes selected.

3. To check the remaining minutes before the TV turns off, press the TIMER button once.

4. To cancel the Sleep Timer, press the TIMER button repeatedly to select

Off.

TTime Menu Options

ime Menu Options

Owner’s Manual 71

Operation

- Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format.
When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be dis­played.

- If you are viewing a picture with a 16:9 aspect ratio, you can’t use the Horizon aspect ratio option.

- Horizon aspect ratio is not available for Component 1-2 (480p/720p/1080i)/RGB-DTV (480p/720p/1080i)/HDMI1/DVI-DTV
(720p/1080i)/DTV(720p/1080i), HDMI2-DTV(720p/1080i) input source.

- In RGB-PC/DVI-PC input source, only use 4:3 or 16:9 aspect ratio are available.

- Note: If a fixed image is displayed on the screen for a long time, it image may become imprinted on the screen and remain visi-

ble.

•

Set By Program

Select the proper picture proportion to match the source’s image. (4:3 → 4:3, 16:9 → 16:9)

•

4:3

Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both
the left and right sides.

•

16:9

Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.

•

Horizon

Choose Horizon when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both
sides, to create a spectacular view.

•

Zoom 1

Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions
of the picture will be cropped.

•

Zoom 2

Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture tak­ing a halfway trade off between alteration and screen coverage.

•

Cinema Zoom

Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or
reducing the picture size, the image may become distorted.

You can adjust the enlarge proportion of Cinema Zoom using

D / E

button. The adjustment range is 1~16.

1. Press the RATIO button repeatedly to select the desired picture format.

You can also adjust

Aspect Ratio in the OPTION menu.

Cinema 3:2 Mode Setup

Cinema 3:2 Mode Setup

- Most movies are 24 frames/sec, but TV signal is 30 frames/sec.

This option lets the TV do 3:2 pull-down operation for you to watch
movies at the best motion appearance.

1. Press the MENU button and then use

D / E

button to select the OPTION menu.

2. Press the

G button and then use

D / E

button to select Cinema 3:2 Mode.

3. Press the

G

button and then use

D / E

button to select On or Off.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Option Menu Features

Option Menu Features

Aspect Ratio Control

Aspect Ratio Control

Note: This feature operates only in 480i mode.

72 Plasma TV

Option Menu Features

Option Menu Features

Operation

Caption/T

Caption/T

ext

ext

Analog Broadcasting System Captions

- Select a caption mode for displaying captioning information if provided on a program.

- Analog caption displays information at any position on the screen.

- Text displays information, usually at the bottom position and is used for a data service.

- Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.

- This TV is programmed to memorize the caption/text mode which was last set to, when you turn the power off.

Digital Broadcasting System Captions

- Choose the language you want the DTV/CADTV Captions to appear in.

- Languages can be chosen for digital sources only if they are included on the program.

1. Press the MENU button and then use

D / E

button to select the OPTION menu.

2. Press the

G button and then use

D / E

button to select Caption/Text.

3. Press the

G button and then use

D / E

button to select caption: CC1, CC2, CC3,

CC4, Text1, Text2, Text3, or Text4.

•

CAPTION

The term for the words that scroll across the bottom of the TV screen; usually
the audio portion of the program provided for the hearing impaired.

•

TEXT

The term for the words that appear in a large black frame and almost cover
the entire screen; usually messages provided by the broadcaster.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

1. Press the MENU button and then use

D / E

button to select the OPTION menu.

2. Press the

G button and then use

D / E

button to select Caption/Text.

3. Press the

G

button and then use

D / E

button to select available caption lan-

guages:

English, Spanish, or French.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Caption

Caption

1. Press the MENU button and then use

D / E

button to select the OPTION menu.

2. Press the

G button and then use

D / E

button to select Caption.

3. Press the

G button and then use

D / E

button to select On or Off.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

1. Use the CC button repeatedly to select Caption CC1, CC2, CC3, CC4, Text1, Text2, Text3, or Text4.

•

EZ Mute shows the selected captions option (if available on program) when the TV sound is muted

.2. Press EXIT button to save and return to TV viewing.

• You can also use the

OPTION menu to select Caption/Text.

SETUP

VIDEO

AUDIO

TIME

OPTION

LOCK

Previous

Aspect Ratio

Cinema 3:2 Mode

Caption

Caption / Text

G

Caption Option

Language

ISM Method

Low Power

Auto Demo

MENU

English

Spanish

French

CABLE

Owner’s Manual 73

Operation

Caption Option

Caption Option

- Customize the DTV/CADTV captions that appear on your screen.

1. Press the MENU button and then use

D / E

button to select the OPTION

menu.

2. Press the

G button and then use

D / E

button to select Caption Option.

3. Press the

G button and then use F / G button to select Custom.

4. Use

D / E

button to customize the Style, Font, etc., to your preference. A pre­view icon is provided at the bottom of the screen, use it to see the caption lan­guage.

•

Size: Set the size of the words.

•

Font: Select a typeface for the words.

•

Text Color: Choose a color for the text.

•

Text Opacity: Specify the opacity for the text color.

•

Bg (Background) Color: Select a background color.

•

Bg (Background) Opacity: Select the opacity for the background color.

•

Edge Type: Select an edge type.

•

Edge Color: Select a color for the edges.

5. Press EXIT button to return to TV viewing or press MENU button to return

to the previous menu.

74 Plasma TV

Operation

- A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost
image ; even though the image is changed. Use our unique method to minimize any fixed image on the screen.

1. Press the MENU button and then use

D / E

button to select the OPTION menu.

2. Press the

G button and then use

D / E

button to select ISM Method.

3. Press the G button and then use

D / E

button to select either Normal, White

Wash

, Orbiter or Inversion.

•

Normal

If image sticking is never a problem, ISM is not necessary - set to Normal.

•

White Wash

White Wash removes permanent images from the screen.

Note: An excessive permanent image may be impossible to clear entirely with
White Wash. To return to normal viewing, press the any button.

•

Orbiter

Orbiter may help prevent ghost images. However, it is best not to allow any
fixed image to remain on the screen. To avoid a permanent image on the
screen, the image will move once per 2 minutes: Left → Right → Upside →
Downside → Right → Left → Downside → Upside.

• Inversion

Inversion will automatically invert the plasma display panel color every 30 min­utes.

4. Press EXIT button to return to TV viewing or press MENU button to return to

the previous menu.

ISM (Image Sticking Minimization) Method

ISM (Image Sticking Minimization) Method

Option Menu Features

Option Menu Features

Owner’s Manual 75

Operation

Low Power

Low Power

- Low power reduces the plasma display power consumption.

1. Press the MENU button and then use

D / E

button to select the OPTION menu.

2. Press the

G button and then use

D / E

button to select Low Power.

3. Press the G button and then use

D / E

button to select On or Off.

• When you select

On, the screen darkens.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

- Displays the slide show to explain the main features of this TV.

1. Press the MENU button and then use

D / E

button to select the OPTION menu.

2. Press the

G button and then use

D / E

button to select Auto Demo.

3. Press EXIT button to stop Auto Demo.

Note : The images on the Auto Demo may differ from the actual products.

Auto Demo

Auto Demo

76 Plasma TV

Operation

Parental Control can be used to block specific channels, ratings and other viewing sources.

The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station.
The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the cat­egories. It is also possible to block all program viewing for a time period. To use this function, the following must be done :

1. Set ratings and categories to be blocked.

2. Specify a password

3. Enable the lock

V-Chip rating and categories

Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV
Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating
System (MPAA) only.

Ratings for Movies previously shown in theaters:

Movie Ratings :

• Blocking Off (Permits all programs)

• G (General audience)

• PG (Parental guidance suggested)

• PG-13 (Parents strongly cautioned)

• R (Restricted)

• NC-17 (No one 17 and under admitted)

• X (Adult only)
If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.

Ratings for Television programs including made-for-TV movies :

• TV-G (General audience)

• TV-PG (Parental guidance suggested)

• TV-14 (Parents strongly cautioned)

• TV-MA (Mature audience only)

• TV-Y (All children)

• TV-Y7 (Children 7 years older)

TV Rating Children:

• Age (applies to TV-Y, TV-Y7)

• Fantasy Violence (applies to TV-Y7)

TV Rating General:

• Age (applies to TV-G, TV-PG, TV-14, TV-MA)

• Dialogue - sexual dialogue (applies to TV-PG, TV-14)

• Language - adult language (applies to TV-PG, TV-14, TV-MA)

• Sex - sexual situations (applies to TV-PG, TV-14, TV-MA)

• Violence (applies to TV-PG, TV-14, TV-MA)

Input Block

• Video, Front Video (On, Off)

• Component 1, 2 (On, Off)

• RGB, HDMI1/DVI, HDMI2 (On, Off)

Lock Menu Options

Lock Menu Options

Owner’s Manual 77

Operation

Parental Lock Setup

Parental Lock Setup

1. Press the MENU button and then use

D / E

button to select the LOCK menu.

Then, press the

G button

• The TV is set up with the initial password “0-0-0-0”.

2. Use the

D / E

button to choose from the following Lock Menu options. Once the

option is selected, change the settings to your preference.

• Lock System: Enables or disables the blocking scheme you set up previ-

ously.

• Set Password: Change the password by inputting a new password twice.

• Block Channel: Blocks any channels that you do not want to watch or
that you do not want your children to watch.

• Movie Rating (MPAA): Blocks movies according to the movie ratings lim-

its specified, so children cannot view certain movies. You can set the rat­ings limit by blocking out all the movies with the ratings above a specified
level. Keep in mind that the movie ratings limit only applies to movies
shown on TV, not TV programs, such as soap operas.

• TV Rating-Children: Prevents children from watching certain children's TV

programs, according to the ratings limit set. The children rating does not
apply to other TV programs. Unless you block certain TV programs intend­ed for mature audiences in the TV Rating - sub menu, your children can
view those programs.

• TV Rating-General: Based on the ratings, blocks certain TV programs that

you and your family do not want to view.

• Input Block: Enables you to select a source to block from the external

source devices you have hooked up.

3. Press EXIT button to return to TV viewing or press MENU button to return to

the previous menu.

Note:

• If you ever forget your password, key in ‘7’, ‘7’, ‘7’, ‘7’ on the remote control.

- Set up blocking schemes to block specific channels, ratings, and external viewing sources.

- A password is required to gain access to this menu.

78 Plasma TV

Operation

Cable menu options

Cable menu options

- The Cable sub menu displays when inserting the CableCARDTMto the TV.

- The CableCARDTMtype is Motorola, Scientific Atlanta (SA), or SCM etc. The
OSD (On screen display) is different from your TV according to your
CableCARDTMtype.

Scrambled channel

Scrambled channel

- Insert the CableCARDTM. If you do it at first, it takes about 1 minute to
exchange the data between the TV and the CableCARD

TM

. Then, TV screen

displays as shown right.

- Let your cable TV service provider know CableCARD

TM

ID and Host ID.

- If your cable TV service provider is registered CableCARD

TM

ID and Host ID,

you can watch the premium or high value channel.

- If you ever registered to the cable TV service provider, you can watch the pre­mium or high value channel without a message.

- If the certificate doesn’t match between the TV and the CableCARD

TM

,

the OSD (On screen display) displays as shown left.

In case of Scientific Atlanta CableCARD™

i.e) CableCARD™/ Host ID Screen

1. Press the MENU button and then use

D / E

button to select the CABLE menu.

2. Press the

G button and then use

D / E

button to select your desired item.

3. Press the

G button.

4. Press EXIT button to return to TV viewing.

SETUP

VIDEO

AUDIO

TIME

OPTION

LOCK

CABLE

SA CableCARD™ Diag Screen G

SA CableCARD™/Host ID Screen

MENU

Exit

In order to start service for
this device, please contact
customer service at
Ph#: 1-866-303-0422

CableCARD(tm): 0-010-405-698-001
HOST ID: 0-080-000-000-226

EXIT

CableCARD(tm) Message

Exit

In order to start cable service for this device,
please contact SuperVision Cable at
1-800-555-8888

POD ID: 7-561-034-449-009

Host ID: 0-100-331-784-018

EXIT

CableCARD™ Message

Please call your operator and report an invalid CableCARDTM.

* In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just example to help

the TV operation.

As shown, the pairing num­ber means your TV and
CableCARD

TM

ID. For fur­ther information regarding
cable TV service, contact
your local cable TV service
provider(s).

CableCARD

CableCARD™™

Function

Function

Owner’s Manual 79

Operation

- If an emergency situation occurs during watching the TV/DTV/CATV/CADTV, you can receive a message from
cable TV service provider(s).

- When receiving an emergency message, the message is displayed on the screen as shown below or the channel
is changed automatically to a channel that maintains the emergency message. The message will automatically dis­appear after some time and return to the last channel.

Emergency Action Notification

Hurricane will be coming!!!

Cable Channel List

Cable Channel List

Emergency

Emergency

Alert Message

Alert Message

1. If you enter the Channel Edit after running the EZ Scan without CableCARDTM, you can see the cable channel list

as the picture 3 above.

2. Insert the CableCARD

TM

. Then, the TV receive a new cable channel list which is usually one part channel. It takes
about 2~3 minutes to gather the cable channel list after inserting the CableCARDTMas the picture 4 above.
(Occasionally more than that time)

1. 2.

3.

4.

80 Plasma TV

Operation

What is Memory Card

What is Memory Card

Precaution for Using the Memory Card

Precaution for Using the Memory Card

Notes on Memory Card

Notes on Memory Card

This is a device equipment to communicate the data between AV external equipment. It’s used to a digital cam­era, camcorder, MP3 player, notebook or PDA.

- Please be sure to insert the correct memory card type in the right direction.
(Confirm between the two memory slots before insertion.)

- Don’t insert the metal substances into the slots of the memory card.

- Do not bend, drop or apply strong shock to memory card.

- After pulling the memory card out from the TV, please keep the memory stick in a appropriate case to prevent
it from static shock.

- The stored data may be changed or lost as a result of misuse, static electricity.

- Do not turn the power off while the memory card is in operation.

- Don’t eject the memory card while in use. Otherwise, it may cause a data loss or card damage.

- Insert only one card to each slot.

- To prevent a change or loss for stored data, don’t misuse the TV or don’t let static electricity or electrical noise
for TV.

- This Company takes no responsibility for problems such as the damage or malfunction that occurs while using
the TV set, inappropriate TV settings, or any other reasons, except for defects or malfunctions intrinsic to the
product.

- Ensure to use a memory card that lists the manufacturers name and serial number.

- The manufacturer will not be responsible for any data damage. Making back up data is strongly recommend­ed.

- Make sure to comply with the following steps when ejecting a memory card.

- Each Memory Card is complied with standard.

- It’s available to play the Photo / Music file on Memory Card.

Owner’s Manual 81

Operation

A.

A.

W

W

Inserting a Card

1. Insert the Memory Card to Memory card slots of TV side panel.

2. Two slots support defferent types of the Memory Cards.

3. If a Memory Card is not inserted, each slot is disabled.

W

W

Ejecting a card

1. Press the M/C EJECT button on the remote control.

2. Select the

Slot 1 or Slot 2 based on the inserted card location.

If you select

Cancel, OSD will disappear.

3. Eject the card by the hand.

Caution: Press the M/C EJECT button of remote control

before removing the memory card. Failure to do so
may damage the card.

How to insert and eject the Memory Card

How to insert and eject the Memory Card

A sort of file

Compatilbility

Photo Image (JPEG)

*.jpg

An error may occur if you use a memory card with greater than the
specified capacity.

Unsupported or damaged JPEG or MP3 files can cause
errors. Do not try to change the file extension of unsupported
file types to the file extension of supported file types.

*.mp3

Memory card

capacity

Unsupported or

damaged file

CF (CompactFlash) : 4GB

MD (Microdrive) : 4GB

CF+|| (MagicStor) :2.2GB

SD (Secure Digital) : 1GB

MMC (MultiMedia Card) : 1GB

MS (Memory Stick) :128MB

MS Pro (Memory Stick Pro) : 1GB

SMC (Smart Media Card) : 128MB

xD (Extream Digital Picture Card) :

512MB

Music File (MP3)

Slot 1

MMC

SD

SMC

Slot 2

MultiMediaCard

TM

Secure Digtal

TM

SmartMedía

xD-Picture Card

MEMORY STICK

CompactFlash

Microdrive

magicstor

xD

MS

CF MD MagicStor

Memory Card type

Memory Card type

- Use the specified card based on the slot location.

- 9 types of Memory Card can be used for this Plasma TV.

- Some MagicStor Plus card is not complied with the TV.

Available file in mode

M

EMORY

S

TICK

PRO

MS Pro

82 Plasma TV

Operation

- When you plug a memory card or press the button, the above screens will be displayed.

1. Press

D / E

/ F / G

button to select either Photo or Music on Memory Card 1 or Memory Card 2.

2. Press ENTER button to view Photo List or Music List of each slot.

3. Press EXIT button or button to return to TV viewing.

Note: In 30 seconds later, 'Loading" message is disappeared.

B.

B.

C.

C.

- When you plug the Memory Card, this screen is displayed, automatically.

Select the Photo or Music

Select the Photo or Music

Notes on Memory Card

Notes on Memory Card

Owner’s Manual 83

Operation

D.

D.

1. Use the CHD/Ebutton to navigate thumbnail photos in pages.

2. Use MARK button to mark or unmark a photo. When one or more photos are marked, you can view or slideshow only

the marked ones.If no photo is marked, you can view or slideshow all photos in the folder.

3. Use

D / E

/ F / G

button to navigate the appropriate thumbnail photos, then press the ENTER button to show the PopUp

menu.

•

View: See the selected item to the full screen.

View state change to slide show state by pressing the PLAY (

G) button.

• Slide Show: Start a slide show with all photos in the folder. The slide show state can be changed to the view state by

pressing the Pause (||) button. Before starting a slide show, you can choose the slide show interval
(3,6 or 9 seconds). Note: 4 hours later, Slide Show is ended, automatically.

•

Mark All: Mark all photos on the screen.

•

Unmark All: Unmark all marked photos.

•

Cancel: Hide the pop-up menu.

4. Repeatedly, press EXIT button to return to TV viewing or press button to return to the entry menu.

E.

E.

- When you select Photo in entry menu, you will now see a screen filled with thumbnail photos.

Photo List

Photo List

Screen Components

Screen Components

Usable Card
memory

Folder List

Current page/Total page

Marked thumbnail photo number

Direct Buttons

Card type

Photo Selection and PopUp Menu

Photo Selection and PopUp Menu

* In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an

example to help you with the TV operation.

84 Plasma TV

Operation

- When you select Music in the entry menu, you will now see a screen filled with music titles.

- Purchased MP3/music files may contain copyright restrictions. Playback of these files may not be sup­ported by this model.

Music List

Music List

Screen Components

Screen Components

Usable Card
memory

Folder List

Current page/Total page

Marked music title number

Direct Buttons

Card type

Current playing time/Total playing time

E.

E.

D.

D.

4394 KB
1 Kbps

* In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an

example to help you with the TV operation.

Owner’s Manual 85

Operation

1. Use the CH

D / E

button to navigate music titles in pages.

2. Use MARK button to mark or unmark a music title. When one or more music titles are marked, the marked music will

be played by turns. For example, if you want to listen to only one music repeatedly, just mark the music only and play
it. If no music title is marked, all the music in the folder will be played in sequence.

3. Use

D / E

/ F / G

button to navigate the appropriate music titles, then press the ENTER button to set the pop-up menu.

• Play: Play the selected music.

• Stop Play: Stop the play.

• Play With Photo: Start playing the selected music by turns and then move to the Photo List.

• Mark All: Mark all music titles in the folder.

• Unmark All: Unmark all marked music.

• Cancel: Hide the pop-up menu.

4. Repeatedly, press EXIT button to return to TV viewing or press button to return to the entry menu.

- If you don't press any button for 40 seconds, the play information box (as shown in the below) will float

as a screen saver.

Notes:

• When music is playing, is displayed in front of the music title.

• If you press any button except VOL

D/E

, MUTE,

G

, II,

Å

, I

FF,GG

I buttons, screen saver is stopped.

• T

he

G

, II,

Å

, I

FF,GG

I buttons on the remote control are also available in this mode.

* The ‘Screen Saver’?
Screen saver is to prevent
screen pixel burning
caused by long time still
picture.

86 Plasma TV

Operation

- PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other

source will show a smaller inset image.

- Twin Picture mode splits the screen into two images, allowing two picture sources to be shown on the TV screen at the same

time. Each source is given half the screen.

- In PIP/POP/Twin Picture mode, the screen savers such as "

No Signal", "Rating Blocked" , "Channel Blocked", or "Aux

Blocked

" may not be displayed on screen.

Press the PIP button to access the sub picture. Each press of PIP changes the PIP options as shown below.

PIP Off

PIP Mode POP Mode

Twin Picture Mode

1. Press the PIP button.

2. Select the Antenna or Cable option on the Sub input menu or with the PIP INPUT button. Use the PIPCH+

/

PIPCH- button to select a channel for the sub picture.

(You can’t select DTV for main and sub picture simultaneously).

Repeatedly, press the SWAP button to switch the main and sub pictures.

• Component 1, Component 2, RGB-PC (or RGB-DTV), HDMI/DVI input sources for the main picture can’t be used to

swap the main and sub pictures.

Use the PIP INPUT button to select the input source for the sub picture. Each press of PIP INPUT button changes
the PIP source. You can also select sources for the

Sub Input in the SETUP menu.

Main Picture Source

Available Sub Picture Sources

DTV
Analog

Analog, Video, and Front Video
DTV, Analog, Video, and Front Video

Main Picture Sub Picture Main Picture Sub Picture

F TV 2-0

TV 4-0

TV 6-0

E

D

Normal Mode

PIP (Picture-In-Picture) / POP / Twin Picture

Remote Control

Remote Control

WWatching PIP/POP/T

atching PIP/POP/T

win Picture

win Picture

Selecting an Input Signal Source for PIP/T

Selecting an Input Signal Source for PIP/T

win Picture

win Picture

Swapping the PIP

Swapping the PIP/T/T

win Picture

win Picture

TV Program selection for PIP

TV Program selection for PIP

Owner’s Manual 87

Operation

In PIP mode, press the

D / E

/ F / G

button to move the sub picture to a different location on the

screen.

Use the

D / E

/ F / G

button to change main and sub picture sizes in Twin Picture mode.

If screen is adjusted to the
maximal size, the large
screen is filled with entire
screen vertically as shown.

i.e)

1. Press the PIP button to activate the POP mode while in PIP mode.

• Channel selection: Use F button to enlarge the selected channel being searched on the PIP

screen to shift it for viewing on the Main screen.

• PIP selection: Use

D / E

button to select one of 3 PIP screen pictures in POP mode.

• When watching TV on Main picture, TV or DTV on Sub pictures are in channel scanning. However,
when watching DTV on Main picture, only TV on Sub picture is in channel scanning.

2. Press the EXIT button to cancel POP mode.

- Use POP to search the programs of all the memorized channels one-by-one on the 3 PIP screen displays,
(while the main picture source remains the current channel). The pictures of all the programmed channels
are searched with the 3 POP screens.

- Notes:

• Run EZ Scan channel search before using POP mode.

• When Sub pictures are changed from the TV/DTV to CATV/CADTV in POP mode, it may make a noise

• from the Tuner switch.

F TV 2-0

TV 4-0

TV 6-0

E

D

Moving the PIP

Moving the PIP

sub picture

sub picture

Adjusting Main and Sub Picture Sizes for

Adjusting Main and Sub Picture Sizes for TT

win Picture

win Picture

POP

POP

(Picture-out-of-Picture: Channel Scan)

(Picture-out-of-Picture: Channel Scan)

88 Plasma TV

Operation

APM (Adaptive Picture Mode)

- Allows a viewer to select their preferred picture mode after compairing the four different picture (Daylight, Normal, Night Time
and Custom) settings.

1. Press the APM button at once. As shown below, the screen is

divided to 4-split.
Use the

D / E

/ F / G

button to navigate 4 EZ Pictures. By press-

ing the ENTER button, you can select the desired mode.

2. Press the APM button, again. As shown below, the 4-same

screens are displayed.
You can easily compare with 4 modes.

3. Use the

D / E

/ F / G

button to navigate 4 EZ Pictures. By press-

ing the ENTER button, you can select the desired mode.

4. Press EXIT button to return to TV viewing.

Note: While operating the 4-split, any button except APM, ENTER, EXIT, VOLUME

D/E

, MUTE button on the

remote control are not available.

Owner’s Manual 89

Operation

4 : 3

16 : 9

The original aspect ratio of the video is 4:3

The original aspect ratio of the video is 16:9(wide)

The video resolution is 720x480i

The video resolution is 720x480p

The video resolution is 1280x720p

The video resolution is 1920x1080i

Multilingual : The program contains two or more audio

services. Press the SAP button to select wanted

Audio.

Caption: => The program contains one or more cap-

tion services. Press the CC button to select wanted

Closed caption.

The program contains V-Chip information. Refer to the

<LOCK Menu>.

D (Dialogue), L (Language), S (Sex), V (Violence), FV

(Fantasy Violence)

480i
480p
720p

1080i

CC

Operation: • Watching TV/DTV/CATV/CADTV

• Watching Video, Front Video

• Watching IEEE 1394

• In Component1, Component2, RGB,

HDMI/DVI modes, INFO button is not
working.

Function: • Show the present screen information.

• On Watching with the upper Input signal,

press the INFO button.

• Press the INFO button or EXIT button to

exit.
A: Banner information
B: Program title
C: Day of week, Month, Year
D: Program start time
E: Program progress bar
F: Program finish time
G: Present time
H: Additional information. Refer to the icon

explanation on the right.

- Brief Info shows the present screen information.

- Press the INFO button to show the Brief Info on the screen.

- INFO button does not work in Component1, Component2, RGB, and HDMI/DVI modes.

- Press the INFO button or EXIT button to exit.

Brief Info.

B

C

D

E

A

F

H

G

90 Plasma TV

Operation

- Nothing to do with Caption on/Off using Mute button, the mode selected Caption/Text is to be displayed.

- When you repeatedly press the Mute button, the sound mode is changed in turn. (Refer to the picture below)

Note:

• EZ Mute does not operate in Component/RGB/HDMI/DVI modes.

Mute : Sound is muted.

EZ Mute : a special mute mode to

activate the closed caption, auto­matically.

EZ Mute

Mute Off : Sound is enabled.

1. Press the FREEZE button in 720p or 1080i mode.

2. Use the

D / E

/ F / G

buttons to select the screen section to be magnified.

3. To return to normal viewing, press the FREEZE button again.

Note : The Magnify feature is available only in 720p or 1080i mode, but the
FREEZE button works in all video formats.

- Enlarges the picture with correct proportions.

- When enlarging the picture, the image may become distorted.

F

F

F

F

Freeze & Magnify (DTV/CADTV 720p, or 1080i mode only)

Mute

24

EZ Mute

Owner’s Manual 91

Operation

• When RGB connect to PC input and select the RGB-PC in Main Input, this function is used.

• When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used.

• In RGB-DTV mode, SIZE and PHASE is not available.

• After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.

- Display PC Adjust Menu using Adjust button.

- Position : Adjust the screen position. After displaying the Adjust, select the screen position.

- Size : Adjust the screen size.

- Phase : Adjust the phase of Pixel clock.
In HDMI/DVI-PC mode, PHASE is not available.

- Reset : Initializating Size, Position, Phase adjustment.

Operation

Operation

Adjustment for screen Position, Size, Phase, Reset

Adjustment for screen Position, Size, Phase, Reset

Screen Setup for PC mode

92 Plasma TV

External Control Device Setup

No. Pin Name
1 No connection
2 RXD (Receive data)
3 TXD (Transmit data)
4 DTR (DTE side ready)
5 GND
6 DSR (DCE side ready)
7 RTS (Ready to send)
8 CTS (Clear to send)
9 No Connection

1

5

6

9

2
3
5
4
6
7
8

RXD

TXD

GND

DTR

DSR

RTS
CTS

TXD
RXD
GND
DSR
DTR

CTS

RTS

PC

7-Wire Configurations

(Standard RS-232C cable)

D-Sub 9

3
2
5
6
4
8
7

PDP

D-Sub 9

2
3
5
4
6
7
8

RXD

TXD

GND

DTR

DSR

RTS
CTS

TXD
RXD

GND

DTR
DSR
RTS
CTS

PC

3-Wire Configurations

(Not standard)

D-Sub 9

3
2
5
4
6
7
8

PDP

D-Sub 9

- Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system)
and control the TV’s functions externally.

- Connect the serial port of the control device to the RS-232C jack on the TV back panel.

- RS-232C connection cables are not supplied with the TV.

TType of Connector; D-Sub 9-Pin Male

ype of Connector; D-Sub 9-Pin Male

RS-232C Configurations

RS-232C Configurations

External Control Device Setup

External Control Device Setup

RS-232C Setup

RS-232C Setup

RS-232C INPUT

(CONTROL/SERVICE)

AUDIO

R

L

DIGITAL AUDIO

(OPTICAL)

DVI

INPUT

COMPONENT2
INPUT

OUTPUT

AUDIO
INPUT

RGB INPUT

VIDEO

HDMI 2

HDMI1 /DVI

COMPONENT INPUT 1

R

L

(MONO)

CABLE

ANTEN

DVD
/DTV
INPUT

IEEE-1394

COMPONENT INPUT 2

MONITOR OUTPUT

A/V INPUT

VIDEO

AUDIO

Cable

S-VIDEO

REMOTE
CONTROL

PC

Owner’s Manual 93

External Control Device Setup

Set ID

Set ID

Use this function to specify a TV ID number.
Refer to ‘Real Data Mapping’. See page 94.

• Baud rate : 9600 bps (UART)

• Data length : 8 bits

• Parity : None

* Use a crossed (reverse) cable.

• Stop bit : 1 bit

• Communication code : ASCII code

Communication Parameters

Communication Parameters

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select SET ID.

3. Press the

G button and then use

D / E

button to adjust SET ID to choose the

desired TV ID number. The adjustment range of

SET ID is 1 ~ 99.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

T

ransmission

*

[Command 1]: First command to control the set. (j or k)

*

[Command 2]: Second command to control the set.

*

[Set ID]: You can adjust the set ID to choose desired TV ID

number in Setup menu. Adjustment range is 1 ~

99. When selecting Set ID ‘0’, every connected the
TV is controlled. Set ID is indicated as decimal
(1~99) on menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.

*

[DATA]: To transmit command data.

Transmit ‘FF’ data to read status of command.

*

[Cr]: Carriage Return

ASCII code ‘0x0D’

*

[ ]: ASCII code ‘space (0x20)’

[Command1][Command2][ ][Set ID][ ][Data][Cr]

TTransmission / Receiving Protocol

ransmission / Receiving Protocol

OK

Acknowledgement

* The TVr transmits ACK (acknowledgement) based on this

format when receiving normal data. At this time, if the data
is data read mode, it indicates present status data. If the
data is data write mode, it returns the data of the PC com­puter.

[Command2][ ][Set ID][ ][OK][Data][x]

Error

Acknowledgement

* The TV transmits ACK (acknowledgement) based on this

format when receiving abnormal data from non-viable
functions or communication errors.

[Command2][ ][Set ID][ ][NG][Data][x]

Data 1: Illegal Code

2: Not supported function
3: Wait more time

01. Power k a 0 ~ 1

02. Input Select k b 0 ~ 9

03. Aspect Ratio k c

*

04. Screen Mute k d 0 ~ 1

05. Volume Mute k e 0 ~ 2

06. Volume Control k f 0 ~ 64

07. Contrast k g 0 ~ 64

08. Brightness k h 0 ~ 64

09. Color k i 0 ~ 64

10. Tint k j 0 ~ 64

11. Sharpness k k 0 ~ 64

12. OSD Select k l 0 ~ 1

13.

Remote Control Lock Mode

k m 0 ~ 1

14. PIP/POP/Twin k n 0,1,2,5

15. PIP Position k q 0 ~ 3

16. Treble k r 0 ~ 64

17. Bass k s 0 ~ 64

18. Balance k t 0 ~ 64

19. Color Temperature k u 0 ~ 2

20. PIP Input Source k y 0 ~ 3

21. ISM Method j p 1,2,4,8

22. Low Power j q

*

23. Orbiter Time Setting j r 1 ~ FE

24. Orbiter Pixel Setting j s 1 ~3

COMMAND 1 COMMAND 2 DATA

(Hexadecimal)

25. Channel Tuning m a 01 ~ 87 01 ~ 87 00 ~ FE 00 ~ FF 00 ~ FF 00 ~ FF

26. Channel Add/Del m b 00 ~ 01

27. Key m c

*

28. Input Select x b

*

29. PIP Input Select x y

*

COM­MAND 2

COM­MAND 1

DATA 0

(Hexadecimal)

DATA 1

(Hexadecimal)

DATA 2

(Hexadecimal)

DATA 3

(Hexadecimal)

Command Reference List

Command Reference List

DATA 4

(Hexadecimal)

DATA 5

(Hexadecimal)

94 Plasma TV

External Control Device Setup

02. Input Select (Command2:b) (Main Picture Input)

G To select input source for the TV.

T

ransmission

Data 0: DTV

1: Analog
2: Video
3: Front Video
4: Component 1

5: Component 2
6: RGB-DTV
7: RGB-PC
8: HDMI1/DVI
9: HDMI2

Date 1: 4:3

2: 16:9
3: Horizon
4: Zoom 1
5: Zoom 2

6: Set by program
10: Cinema Zoom (1)

1F: Cinema Zoom (16)

[k][b][ ][Set ID][ ][Data][Cr]

Acknowledgement

[b][ ][Set ID][ ][OK][Data][x]

01. Power (Command2:a)

G To control Power On/Off of the TV.

T

ransmission

Data 0 : Power Off 1 : Power On

[k][a][ ][Set ID][ ][Data][Cr]

Acknowledgement

[a][ ][Set ID][ ][OK][Data][x]

* In a like manner, if other functions transmit ‘FF’ data

based on this format, Acknowledgement data feedback
presents status about each function.

*

Real data mapping

0 : Step 0 (SET ID ALL)

1 : Step 1 (SET ID 1)

A : Step 10 (SET ID 10)

F : Step 15 (SET ID 15)

10 : Step 16 (SET ID 16)

63 : Step 99 (SET ID 99)
64 : Step 100

05. Volume Mute (Command2:e)

G To control volume mute on/off.

You can also adjust mute using the MUTE button on
remote control.

T

ransmission

Data 0 : Volume mute off (Volume on)

1 : Volume mute on (Volume off)
2 : Volume mute on, Caption on

[k][e][ ][Set ID][ ][Data][Cr]

Acknowledgement

[e][ ][Set ID][ ][OK][Data][x]

03. Aspect Ratio (Command2:c) (Main picture format)

G To adjust the screen format.

You can also adjust the screen format using the RATIO
button on remote control or in the Option menu.

T

ransmission

[k][c][ ][Set ID][ ][Data][Cr]

Acknowledgement

[c][ ][Set ID][ ][OK][Data][x]

04. Screen Mute (Command2:d)

G To select screen mute on/off.

T

ransmission

Data 0 : Screen mute off (Picture on)

1 : Screen mute on (Picture off)

[k][d][ ][Set ID][ ][Data][Cr]

Acknowledgement

[d][ ][Set ID][ ][OK][Data][x]

06. Volume Control (Command2:f)

G To adjust volume.

You can also adjust volume with the volume buttons
on remote control.

T

ransmission

Data Min : 0 ~ Max : 64

• Refer to ‘Real data mapping’ as shown below.

[k][f][ ][Set ID][ ][Data][Cr]

Acknowledgement

[f][ ][Set ID][ ][OK][Data][x]

07. Contrast (Command2:g)

G To adjust screen contrast.

You can also adjust contrast in the Video menu.

T

ransmission

Data Min : 0 ~ Max : 64

• Refer to ‘Real data mapping’ as shown below.

[k][g][ ][Set ID][ ][Data][Cr]

Acknowledgement

[g][ ][Set ID][ ][OK][Data][x]

08. Brightness (Command2:h)

G To adjust screen brightness.

You can also adjust brightness in the Video menu.

T

ransmission

Data Min : 0 ~ Max : 64

• Refer to ‘Real data mapping’ as shown below.

[k][h][ ][Set ID][ ][Data][Cr]

Acknowledgement

[h][ ][Set ID][ ][OK][Data][x]

Owner’s Manual 95

External Control Device Setup

09. Color (Command2:i)

G To adjust the screen color.

You can also adjust color in the Video menu.

T

ransmission

Data Min : 0 ~ Max : 64

• Refer to ‘Real data mapping’. See page 94.

[k][i][ ][Set ID][ ][Data][Cr]

Acknowledgement

[i][ ][Set ID][ ][OK][Data][x]

10. Tint (Command2:j)

G To adjust the screen tint.

You can also adjust tint in the Video menu.

T

ransmission

Data Red : 0 ~ Green : 64

• Refer to ‘Real data mapping’. See page 94.

[k][j][ ][Set ID][ ][Data][Cr]

Acknowledgement

[ j ][ ][Set ID][ ][OK][Data][x]

13. Remote Control Lock Mode (Command2:m)

G To lock the remote control and the front panel controls on

the set.

T

ransmission

[k][m][ ][Set ID][ ][Data][Cr]

Acknowledgement

Data 0: Lock off 1: Lock on

[m][ ][Set ID][ ][OK][Data][x]

14. PIP / POP / Twin Picture (Command2:n)

G To control the PIP (Picture-in-Picture)/POP/Twin picture.

You can also control the PIP/POP/Twin picture using the
PIP button on the remote control.

T

ransmission

Data 0: PIP off

1: PIP

2: Twin Picture
5: POP

[k][n][ ][Set ID][ ][Data][Cr]

Acknowledgement

[n][ ][Set ID][ ][OK][Data][x]

G To adjust the screen sharpness.

You can also adjust sharpness in the Video menu.

T

ransmission

11. Sharpness (Command2:k)

Data Min: 0 ~ Max: 64

•

Refer to ‘Real data mapping’. See page 94.

[k][k][ ][Set ID][ ][Data][Cr]

Acknowledgement

[k][ ][Set ID][ ][OK][Data][x]

12. OSD Select (Command2:l)

G To select OSD (On Screen Display) on/off.

T

ransmission

[k][l][ ][Set ID][ ][Data][Cr]

Acknowledgement

Data 0: OSD off 1: OSD on

[l][ ][Set ID][ ][OK][Data][x]

15. PIP Position (Command2:q)

G To select sub picture position for PIP.

T

ransmission

[k][q][ ][Set ID][ ][Data][Cr]

Acknowledgement

Data 0: Right down on screen

1: Left down on screen
2: Left up on screen
3: Right up on screen

[q][ ][Set ID][ ][OK][Data][x]

16. Treble (Command2:r)

G To adjust treble.

You can also adjust treble in the Audio menu.

T

ransmission

Data Min: 0 ~ Max: 64

• Refer to ‘Real data mapping’. See page 94.

[k][r][ ][Set ID][ ][Data][Cr]

Acknowledgement

[r][ ][Set ID][ ][OK][Data][x]

18. Balance (Command2:t)

G To adjust balance.

You can also adjust balance in the Audio menu.

T

ransmission

Data Min: 0 ~ Max: 64

• Refer to ‘Real data mapping’. See page 94.

[k][t][ ][Set ID][ ][Data][Cr]

Acknowledgement

[t][ ][Set ID][ ][OK][Data][x]

17. Bass (Command2:s)

G To adjust bass.

You can also adjust bass in the Audio menu.

T

ransmission

Data Min: 0 ~ Max: 64

• Refer to ‘Real data mapping’. See page 94.

[k][s][ ][Set ID][ ][Data][Cr]

Acknowledgement

[s][ ][Set ID][ ][OK][Data][x]

96 Plasma TV

External Control Device Setup

19. Color Temperature (Command2:u)

G To adjust color temperature.

You can also adjust color temperature in the Video
menu.

T

ransmission

Data 0: Medium 1: Cool 2: Warm

[k][u][ ][Set ID][ ][Data][Cr]

Acknowledgement

[u][ ][Set ID][ ][OK][Data][x]

23. Orbiter Time Setting (Command2:r)

G To adjust orbiter operation time term.

T

ransmission

Data Min: 1 ~ Max: FE

[ j ][r][ ][Set ID][ ][Data][Cr]

Acknowledgement

[r][ ][Set ID][ ][OK][Data][x]

24. Orbiter Pixel Setting (Command2:s)

G To adjust pixel number in orbiter function.

T

ransmission

Data Min: 1 ~ Max: 3

[ j ][s][ ][Set ID][ ][Data][Cr]

Acknowledgement

[s][ ][Set ID][ ][OK][Data][x]

25. Tune Command (Command: m a)

G To tune channel to following physical/major/minor number

T

ransmission

Data 0:

Physical Channel Number(Transmit by Hexadecimal code)

NTSC air:02~45

NTSC cable: 01, 0E~7D

ATSC air:01~45

ATSC cable:01~87

Data1,Data2:

Major Channel Number (two part)/ Channel Number (One part)

Data1: High byte

Data2: Low byte

Two part channel number: Major number-Minor number

One part channel number: If the channel band is ATSC

digital cable, it can be used. In case of using one part chan

nel number, minor channel does not need.

Data3, Data 4:

Minor Channel Number Data3: High byte Data4: Low byte

Data 5:

[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]

20. PIP Input Select (Command2:y)

G To select input source for sub picture in PIP/Twin pic-

ture mode.

T

ransmission

Data 0: DTV

1: Analog
2: Video
3: Front Video

[k][y][ ][Set ID][ ][Data][Cr]

Acknowledgement

[y][ ][Set ID][ ][OK][Data][x]

21. ISM Method (Command2:p)

G To avoid having a fixed image remain on screen.

T

ransmission

Data 1: Inversion

2: Orbiter
4: White Wash
8: Normal

[ j ][p][ ][Set ID][ ][Data][Cr]

Acknowledgement

[p][ ][Set ID][ ][OK][Data][x]

22. Low Power (Command2:q)

G To control the Low Power function on/off.

You can also adjust Low Power in Option menu.

T

ransmission

Data 0: Low Power off

1: Low Power on

[ j ][q][ ][Set ID][ ][Data][Cr]

Acknowledgement

[q][ ][Set ID][ ][OK][Data][x]

7

Main/Sub
Picture

6

Two/One

Part

Channel

Using
Physical
Channel

4

Reserv

ed

3

2

1

0

Step

0

1

Main

Sub

0

1

Two

One

Use

No Use

x

x

x

x

x

x

x

x

x

x

x

x

0

1

0

0

0

0

0

0

0

1

1

1

1

0

0

0

0

1

1

0

0

1

0

1

0

1

1

1

0

1

1

0

x

x

0

1

1

0

NTSC Air

ATSC

cable_auto

ATSC

Cable_irc

ATSC

Cable_hrc

ATSC

Cable_std

NTSC Cable

ATSC Air

Reserved

...

Reserved

5

0

1

Owner’s Manual 97

External Control Device Setup

[a][ ][Set ID][ ][OK][Data0][Data1][Data2][Data3][Data4][Data5][x]
[a][ ][Set ID][ ][NG][Data0][x]

Acknowledgement

28. Input select(Command: x b) (Main Picture Input)

G To select input source for TV.

T

ransmission

[x][b][][Set ID][][Data][Cr]

[b][ ][Set ID][ ][OK/NG][Data][x]

Acknowledgement

* All data are transmitted by Hexadecimal code
*Two/One part Channel: 6th bit

This bit is used in a cable-ready system.

*Using physical channel: 5th bit
If the channel band is NTSC air or NTSC cable, channel tun­ing can be done by only physical channel. In this case, using
physical channel bit must be low(0).
But if the channel band is ATSC air or ATSC cable, there are
two cases that physical channel enable or disable.
If the physical channel sending is meaningful, you should set
this bit low(0). If the physical channel sending is meaningless,
you should set this bit high(1).
Example)

1. Analog channel: NTSC cable, channel number(35), main
picture Command: ma 00 23 xx xx xx xx 01 attribute(0x01):
main picture, two part(it’s not mandatory), using physical chan­nel, NTSC cable ‘xx’ data: don’t care major and minor channel
number in case analog channel tuning.

2. Digital channel: ATSC air, channel number(don’t know phys­ical channel, major(30), minor(3)), sub picture
Command: ma 00 xx 00 1E 00 03 A2 attribute(0xA2): sub pic­ture, two part, not using physical channel, ATSC air ‘xx’ data:
don’t care analog channel number in case digital channel tun­ing.

3. Digital channel: ATSC air, channel
number(physical(20),major(20), minor(3)), sub picture
Command: ma 00 14 00 14 00 03 82 attribute(0x82): sub pic­ture, two part, using physical channel, ATSC air.

Data Structure

DATA(Hex)

INPUT

00

DTV (Antenna)

01

10

11

20

21

40

41

50

60

90

91

DTV (Cable)

Analog (Antenna)

Analog (Cable)

Video

Front Video

Component 1

Component 2

RGB DTV

RGB PC

HDMI1/DVI

HDMI2

29. PIP Input Select(Command: x y)

G To adjust input source for sub picture in PIP mode

T

ransmission

[x][y][][Set ID][][Data][Cr]

26. Channel Add/Del (Command: m b)

G To add and delete the channels

T

ransmission

Data 0: Channel Delete

1: Channel Add

[m][b][ ][Set ID][ ][Data][Cr]

[b][ ][Set ID][ ][OK][Data][x]
[b][ ][Set ID][ ][NG][Data][x]

Acknowledgement

27. Key (Command: m c)

G To send IR remote key code

T

ransmission

Data Key code: Refer to page 99.

[m][c][ ][Set ID][ ][Data][ ][Cr]

[c][ ][Set ID][ ][OK][Data][x]

Acknowledgement

Data Structure

DATA(Hex)

INPUT

00

DTV (Antenna)

01

10

11

20

21

DTV (Cable)

Analog (Antenna)

Analog (Cable)

Video

Front Video

[y][][Set ID][][OK/NG][Data][x]

Acknowledgement

98 Plasma TV

IR Codes

G Connect your wired remote control to the Remote Control port on the TV.

G Output waveform

Single pulse, modulated with 37.917KHz signal at 455KHz

G Configuration of frame

G Repeat code

G Lead code

• 1st frame

Low
custom code

Lead
code

High
custom code

Data code

Data code

T

C

Tf

T1

C0

Carrier frequency

F

CAR = 1/TC = fOSC/12

Duty ratio = T1/T

C = 1/3

• Repeat frame

C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Repeat code

9 ms 4.5 ms

0.55 ms

9 ms

2.25 ms

G Bit description

G Frame interval : Tf

The waveform is transmitted as long as a key is depressed.

• Bit “0”

Tf Tf

Tf=108ms @455KHz

0.56 ms 0.56 ms

1.12 ms

• Bit “1”

2.24 ms

How to Connect

How to Connect

Remote Control IR Codes

Remote Control IR Codes

IR Codes

IR Codes

Owner’s Manual 99

IR Codes

0F
0B
08
C4
C5
79
0E
10 ~ 19
4C
1A
09
02
03
00
01
1E
AA
39
40
41
07
06
44
43
52
4D
5B
60
72
71
61
63
65
0A
CB
D6
5A
D0
BF
D4
D5
D7
C6
CC
76
77
AF
70
87
B0
BA
B1
BD
8F
8E
B2
B3
A9
92
CA
80
C8
7D

R/C Button
R/C Button
R/C Button (Power On/Off)
Discrete IR Code (Only Power On)
Discrete IR Code (Only Power Off)
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
Discrete IR Code (TV Input Selection)
Discrete IR Code (Video Input Selection)
Discrete IR Code (Front Video Input Selection)
Discrete IR Code (Component1 Input Selection)
Discrete IR Code (Component2 Input Selection)
Discrete IR Code (RGB-PC Input Selection)
Discrete IR Code (RGB-DTV Input Selection)
Discrete IR Code (HDMI/DVI Input Selection)
Discrete IR Code (HDMI2 Input Selection)
Discrete IR Code(Only 4:3 Mode)
Discrete IR Code (Only 16:9 Mode)
Discrete IR Code (Only Zoom1 Mode)
Discrete IR Code (Channel Search)
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button

Code (Hexa) Function Note

TV INPUT
TV/VIDEO
POWER
POWER ON
POWER OFF
RATIO
TIMER
Number Key 0~ 9

- (Dash)
FLASHBK
MUTE
VOL

D

VOL

E

CH

D

CH

E

FAV
INFO
CC

D
E
F
G

ENTER
MENU
EZ SOUND
EZ PIC
EXIT
PIP
PIPCH ­PIPCH +
PIP INPUT
SWAP
FREEZE
SAP
ADJUST
TV
VIDEO
Front Video
COMPONENT 1
COMPONENT 2
RGB-PC
RGB-DTV
HDMI1/DVI
HDMI2
Ratio 4:3
Ratio 16:9
Ratio Zoom
POP
1394
PLAY
PAUSE
STOP
REC
REW
FF
GOTOPREV
GOTONEXT
TV GUIDE
APM
MC EJECT
AUTO DEMO
X STUDIO
MARK

100 Plasma TV

Programming the Remote

G The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of

other manufacturers.
Note that the remote may not control all models of other brands.

Programming a code into a remote mode

Programming a code into a remote mode

Programming the Remote

Programming the Remote

1. To find out whether your remote can operate the device without programming, turn on the device such as a VCR and press the
corresponding mode button on the remote.
After that, press the POWER button. If the device is turned off then it responds properly and the remote need not to be pro­grammed. If not, the remote should be programmed to operate the device. The programming procedures are explained below.

2. Press the MENU and MUTE button continuously at the same time for 2 seconds, the current selected device button will be illu­minated.
If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from
step 2.

3. Enter code numbers using the number button on the remote by refering the code table on the following pages. When pressing
the button, the light blinks at a time. If the device turned off, the programming is successful.

4. Press the MENU button to store the code. After blinking twice, this code is stored.

5. Test the remote functions to see if the device responds properly. If not, repeat from step 2.

Owner’s Manual 101

Programming Codes

Programming Codes

Programming Codes

VCRs

VCRs

CACATV

TV

AIWA 034
AKAI 016 043 046 124

125 146
AMPRO 072
ANAM 031 033 103
AUDIO DYNAMICS

012 023 039 043
BROKSONIC 035 037 129
CANON 028 031 033
CAPEHART 108
CRAIG 003 040 135
CURTIS MATHES 031 033 041
DAEWOO 005 007 010 064

065 108 110 111

112116117119
DAYTRON 108
DBX 012 023 039 043
DYNATECH 034 053
ELECTROHOME 059
EMERSON 006 017 025 027

029 031 034 035

036 037 046 101

129 131 138 153
FISHER 003 008 009 010
FUNAI 034
GE 031 033 063 072

107 109 144 147
GO VIDEO 132 136
HARMAN KARDON

012 045
HITACHI 004 018 026 034

043 063 137 150
INSTANTREPLAY 031 033
JCL 031 033
JCPENNY 012 013 015 033

040 066 101
JENSEN 043
JVC 012 031 033 043

048 050 055 060

130 150 152

KENWOOD 014 034 039 043

047 048

LG (GOLDSTAR) 001 012 013 020

101 106 114 123
LLOYD 034
LXI 003 009 013 014

017 034 101 106
MAGIN 040
MAGNAVOX 031 033 034 041

067 068
MARANTZ 012 031 033 067

069
MARTA 101
MATSUI 027 030
MEI 031 033
MEMOREX 003 010 014 031

033 034 053 072

101 102 134 139
MGA 045 046 059
MINOLTA 013 020
MITSUBISHI 013 020 045 046

049 051 059 061

151
MTC 034 040
MULTITECH 024 034
NEC 012 023 039 043

048
NORDMENDE 043
OPTONICA 053 054
PANASONIC 066 070 074 083

133 140 145
PENTAX 013 020 031 033

063
PHILCO 031 034 067
PHILIPS 031 033 034 054

067 071 101
PILOT 101
PIONEER 013 021 048

PORTLAND 108
PULSAR 072
QUARTZ 011 014
QUASAR 033 066 075 145
RCA 013 020 033 034

040 041 062 063
107 109 140 144
145 147

REALISTIC 003 008 010 014

031 033 034 040

053 054 101
RICO 058
RUNCO 148
SALORA 014
SAMSUNG 032 040 102 104

105 107 109 112

113 115 120 122

125
SANSUI 022 043 048 135
SANYO 003 007 010 014

102 134
SCOTT 017 037 112 129

131
SEARS 003 008 009 010

013 014 017 020

031 042 073 081

101
SHARP 031 054 149
SHINTOM 024
SONY 003 009 031 052

056 057 058 076

077 078 149
SOUNDESIGN 034
STS 013
SYLVANIA 031 033 034 059

067
SYMPHONIC 034
TANDY 010 034

TATUNG 039 043
TEAC 034 039 043
TECHNICS 031 033 070
TEKNIKA 019 031 033 034

101
THOMAS 034
TMK 006
TOSHIBA 008 013 042 047

059 082 112 131
TOTEVISION 040 101
UNITECH 040

VECTOR RESEARCH

012
VICTOR 048
VIDEO CONCEPTS

012 034 046
VIDEOSONIC 040
WARDS 003 013 017 024

031 033 034 040

053 054 131
YAMAHA 012 034 039 043
ZENITH 034 048 056

058 072 080 101

Brand Codes Brand Codes Brand Codes Brand Codes

Brand Codes Brand Codes Brand Codes Brand Codes

ABC 003 004 039 042

046 052 053
AJIN 112
ANTRONIK 014
ARCHER 005 007 014 024
CABLE STAR 026
CENTURION 092
CENTURY 007
CITIZEN 007
COLOUR VOICE 065 090
COMBANO 080 081
COMTRONICS 019 030
DIAMOND 023
EAGLE 020 030 040
EASTERN 057 062 066
ELECTRICORD 032
GE 072
GEMINI 008 022 025 054
GI 052 074

GOLDEN CHANNEL

030
HAMLIN 049 050 055
HITACHI 052 055
HOSPITALITY 070 077
JERROLD 002 003 004 008

009 010 052 069

074
LG (GOLDSTAR) 001 106 101 005
M-NET 037
MACOM 033
MAGNAVOX 010 012 064 079
MEMOREX 100
MOVIE TIME 028 032
NSC 015 028 038 071

073
OAK 016 031 037 053
PANASONIC 044 047
PARAGON 100
PHILIPS 006 012 013 020

065 085 090

PIONEER 034 051 052 063

076

POST NEWS WEEK

016
PRUCER 059
PTS 011 048 071 072

073 074
PULSAR 100
RCA 047
REGAL 049 050
REGENCY 057
REMBRANT 025
SAMSUNG 102 107 030 068

SCIENTIFIC ATLANTA

003 011 041 042

043 045 046
SHERITECH 022
SIGNAL 030
SIGNATURE 052
SL MARX 030

SPRUCER 047 078
STARCOM 002 004 008 009
STARGATE 008 030
TADIRAN 030
TAEKWANG 110
TAIHAN 105
TANDY 017
TEXSCAN 029
TOCOM 039 040 056
TOSHIBA 100
UNIKA 007 014 024
UNITED CABLE 004 053
UNIVERSAL 005 007 014 024

026 027 032 035

VIEWSTAR 012 015 018 086

087 088 089

ZENITH 100 114 060 093

102 Plasma TV

Programming Codes

Audio

Audio

APEX DIGITAL 022
DENON 020 014
GE 005 006
HARMAN KARDON 027
JVC 012
LG 001 010 016 025

MAGNAVOX 013
MARANTZ 024
MITSUBISHI 002
NAD 023
ONKYO 008 017
PANASONIC 003 009

PHILIPS 013
PIONEER 004 026
PROCEED 021
PROSCAN 005 006
RCA 005 006
SAMSUNG 011 015

SONY 007
THOMPSON 005 006
TOSHIBA 019 008
YAMAHA 009 018
ZENITH 010 016 025

DVD

DVD

ALPHASTAR DSR

123
AMPLICA 050
BIRDVIEW 051 126 129
CHANNEL MASTER

013 014 015 018

036 055
CHAPARRAL 008 009 012 077
CITOH 054
CURTIS MATHES 050 145
DRAKE 005 006 007 010

011 052 112 116

141
DX ANTENNA 024 046 056 076
ECHOSTAR 038 040 057 058

093 094 095 096

097 098 099 100

122
ELECTRO HOME 089
EUROPLUS 114
FUJITSU 017 021 022 027

133 134

GENERAL INSTRUMENT

003 004 016 029
031 059 101

HITACHI 139 140

HOUSTON TRACKER

033 037 039 051

057 104
HUGHES 068
JANIEL 060 147
JERROLD 061
KATHREIN 108
LEGEND 057
LG 001
LUTRON 132
LUXOR 062 144
MACOM 010 059 063 064

065
MEMOREX 057
NEXTWAVE 028 124 125
NORSAT 069 070

PACE SKY SATELLITE 143

PANASONIC 060 142
PANSAT 121
PERSONAL CABLE 117
PHILIPS 071
PICO 105
PRESIDENT 019 102
PRIMESTAR 030 110 111
PROSAT 072
RCA 066 106
REALISTIC 043 074
SAMSUNG 123

SATELLITE SERVICE CO

028 035 047 057
085

SCIENTIFIC ATLANTA

032 138
SONY 103
STARCAST 041
SUPER GUIDE 020 124 125
TEECOM 023 026 075 087

088 090 107 130

137
TOSHIBA 002 127
UNIDEN 016 025 042 043

044 045 048 049

078 079 080 086

101 135 136
VIEWSTAR 115
WINEGARD 128 146
ZENITH 081 082 083 084

091 120

HDSTB

HDSTB

Brand Codes Brand Codes Brand Codes Brand Codes

Brand Codes Brand Codes Brand Codes Brand Codes

AIWA 014 028 070 096

125 129 139 229

230
AKAI 163
ANAM 003 014 017 023

059 106 189 216

217 235 236
BURMECTER 252
CARVER 086
CLARION 199
DAEWOO 027 053 060 084

102 148 198 221
DENON 015 075 130 143
FANTASIA 071
FINEARTS 022
FISHER 089 099
LG(GOLDSTAR) 001 021 024 029

087 107 108 110

190 191 192 210

211 212 239
HAITAI 034 035 188 222
HARMAN/KARDON 068
INKEL 037 058 062 069

078 079 095 121

122 149 150 151

152 153 154 155

157 158 159 160

189 207 222 224

225 226 227 243

247

JVC 004 013 141
KEC 185 186 187
KENWOOD 038 050 067 089

170 171 197 206

215 222
KOHEL 030
NAD 045 046
LOTTE 014 016 036 098

100 172 173 174

175 176 177 178

179 180 181 183

201 202 208 213

214 219 223 232

238 240
LXI 103
MAGNAVOX 111
MARANTZ 002 018 020 025

034 041 081 090

097 112
MCINTOSH 049
MCS 104
MEMOREX 107
NAD 046
ONKYO 013 040 041 047

048 056 057 132

133 140
OPTIMUS 158
PANASONIC 007 033 064 113

142 220 241 251
PENNEY 104

PHILIPS 026 112 143
PIONEER 039 042 043 063

065 091 093 094

115 123 127 250
QUASAR 113
RCA 080
RCX 092
REALISTIC 103 106
SAMSUNG 124 145 146 182

193 194 195 203

204 244 245 246
SANSUI 011 135 138 144
SANYO 019 083 234
SCOTT 106 186
SHARP 031 032 051 052

072 082 117 119

156 184 199 200

206 209
SHERWOOD 005 006 158
SONY 044 045 109 114

118 126 248 249
TAEKWANG 012 020 073 074

076 077 105 161

162 163 164 165

166 167 168 169

205 231 233 242

TEAC 010 085 106 136

185 187 237
TECHNICS 101 113 128 134

147 218
TOSHIBA 137
THE 061
VICTOR 088 131
WARDS 089
YAMAHA 054 055 066 092

199

Brand Codes Brand Codes Brand Codes Brand Codes

Owner’s Manual 103

Troubleshooting Checklist

No output from one of

the speakers

• Adjust Balance in the AUDIO menu. (Refer to p.66)

Unusual sound from

inside the TV

• A change in ambient humidity or temperature may result in an unusual noise
when the plasma display is turned on or off and does not indicate a fault with
the TV.

No picture &

No sound

• Check whether the TV is turned on.

• Is the power cord inserted into wall power outlet?

• Test the wall power outlet, plug another product’s power cord into the outlet
where the TV’s power cord was plugged in.

No or poor color

or poor picture

• Select Color in the Video menu and press the VOLUME (G) button.
(Refer to p.65)

• Keep a sufficient distance between the TV and the VCR.

• Activate any function to restore the brightness of the picture.

(If still picture is on the screen for more than 5 minutes, the screen gets dark.)

The remote control

doesn’t work

• Check to see if there is any object between the TV and the remote control
causing obstruction.

• Are batteries installed with correct polarity (+ to +, - to -)?
(Refer to p.11)

• Correct remote operating mode set: TV, VCR etc.?

• Install new batteries. (Refer to p.11)

Picture OK &

No sound

• Press the VOLUME (G) button.

• Sound muted? Press MUTE button.

Picture appears slowly

after switching on

• This is normal, the image is muted during the TV startup process. Please
contact your service center, if the picture has not appeared after five minutes.

Horizontal/vertical bars

or picture shaking

TTroubleshooting Checklist

roubleshooting Checklist

• Check for local interference such as an electrical appliance or power tool.

104 Plasma TV

Maintenance

1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and
a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the
screen.

2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.

If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.

- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your
new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

Cleaning the Screen

Cleaning the Cabinet

Cleaning the Cabinet

Extended

Extended

Absence

Absence

Maintenance

Maintenance

Owner’s Manual 105

Specification

Product Specifications

Product Specifications

• The specifications shown above may be changed without prior notice for quality improvement.

MODELS

AC100-240V ~ 50/60Hz

NTSC-M, ATSC, 64 & 256 QAM

VHF 2 ~ 13, UHF 14 ~ 69, DTV 2 ~ 69, CATV 1 ~ 135, CADTV 1 ~ 135.

75 Ω

16,770,000 (256 steps of each R, G and B)

32 ~ 104°F (0 ~ 40°C)

Less than 80%

6561 feet (2000m)

57.5 / 1461

32.9 / 835

13 / 331.3

120.6 / 54.7

1366 x 768 (Dot)

Width (inches / mm)

Height (inches / mm)

Depth (inches / mm)

Weight (pounds / kg)

Resolution

Power requirement

Television System

Program Coverage

External Antenna Impedance

Color

Operating Temperature Range

Operating Humidity Range

Maximum Elevation

50PX4D-UB / 50PX5D-UB

106 Plasma TV

Notes

Notes

Your LG Plasma TV will be repaired or replaced in accordance with the terms of this warranty, at LGE’s option, if it
proves to be defective in material or workmanship under normal use, during the warranty period (“Warranty Period”)
listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This war­ranty is good only to the original purchaser of the product and effective only when used in the United States, includ­ing Alaska, Hawaii, and U.S. Territories.

LG ELECTRONICS, INC.

PLASMA TV — U.S. LIMITED WARRANTY

CONCERNING PIXEL FUNCTIONALITY: Your Plasma TV contains about one million individual pixels. Plasma TV
typically contain a small number of pixels that do not function normally. Your display has been inspected and is in
compliance with manufacturer’s specifications, indicating that any pixel defects do not effect the operation or use
of your display.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE
EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS
WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE
LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY
NATURE, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST OR CORRUPTED PROGRAMMING OR
DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do

not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied
warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal
rights and you may also have other rights that vary from state to state.

WARRANTY PERIOD:

LABOR and PARTS: 2 YEARS from the Date of Purchase.

Your unit will be repaired or replaced with a new, substitute
model or factory reconditioned unit, at LGE’s option. If
repaired, parts used in the repair may be new or remanufac­tured.
Replacement Units and Repair Parts are warranted for the
remaining portion of the original unit’s warranty period.

EFFECTIVE DATE OF WARRANTY: Your warranty period
begins on the date of sale to the original consumer/end user.
KEEP THE DEALER’S DATED BILL OF SALE OR PROOF OF
DELIVERY as evidence of the purchase date. You will be
required to submit a legible copy of your bill of sale or proof
of delivery when requesting warranty service.

HOW SERVICE IS HANDLED:

In-Home Service: Please retain dealer’s

dated bill of sale or delivery ticket as evidence
of the Date of Purchase for proof of warranty,
and submit a copy of the bill of sale to the ser­vice person at the time warranty service is pro­vided.

Please call 1-800-243-0000 to locate your
nearest LGE Authorized Service Center.

Visit our website at:

http://www.lgservice.com

IMPORTANT: Please fill out and mail in your Product Registration Card or go to www.lgservice.com to register your

product online. This information will allow us to reach you promptly should we discover a safety or reliability prob­lem that could affect you.

TO CONTACT THE LGE CUSTOMER SERVICE CENTER BY MAIL:

LGE Customer Interactive Center
P.O. Box 240007
201 James Record Road
Huntsville, Alabama 35824
http://www.lgservice.com

FOR SERVICE:
Before you call for warranty service, check your operating guide – you may avoid a service call.

For warranty service information, please contact the LGE Customer Interactive Center telephone number.

When calling for service, please have your product model number, serial number and the date of pur-

chase or the date of original installation available.

If a replacement unit is required, under some circumstances you may be asked to provide a reserve deposit to
the LGE Service Center against a credit card number as surety for advanced shipment. Your credit card will not
be charged if you return the defective unit within 10 working days.

If a replacement unit is received, please use the carton and packaging from that unit in returning the defective
unit to the LG

®

Brand Service Center.

Parts and service in accordance with the LGE warranty are LGE’s responsibility and will be provided without
charge. Other service requirements will be at the owner’s expense. If you have problems in obtaining satisfactory
warranty service, write or call the LGE Customer Interactive Center. Service may be provided by independently
owned and operated service organizations.

To assure proper credit and avoid unnecessary charges, you must obtain an LGE Return Authorization before
returning any product to the LGE Service Center. Contact the Customer Interactive Center for details.

CUSTOMER INTERACTIVE CENTER NUMBERS:

To obtain customer assistance, product
information or Dealer or Service locations

Call 1-800-243-0000

24 hours a day, 365 days per year

THIS LIMITED WARRANTY DOES NOT APPLY TO:

The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.

● damage caused in shipping or transit

● service required as a result of improper installation,

including incorrect or insufficient AC supply (please
consult the owner’s manual for power supply
requirements)

● installation or repair of antenna systems, cable con-

verters, cable company supplied equipment, or
other components in a video system

● set-up or adjustment on consumer controls, or

damage caused by improper adjustments

● damage caused by other system components

● any panel that has been modified or incorporated

into any other product

● replacement of batteries on the remote control.

● damage (including cosmetic damage), failure, loss

or personal injury due to misuse, abuse, negli-

gence, improper maintenance or storage, or to acts
of nature or other causes beyond our control.
(Causes beyond our control include but are not lim­ited to lightning strike, power surges, power out­ages and water damage.)

● image burn-in

● repair or replacement of warranted parts by other

than LGE authorized service centers.

● units purchased or serviced outside of the coverage

area.

● product where the original factory serial numbers

have been removed, defaced or changed in any
way.

● product sold and labeled as “as is, where is” or sim-

ilar disclaimer.

P/NO : 3828VA0528E (3828VB0002M)

a