LG Electronics USA 47LG70UA User Manual

WATCHING TV /CHANNEL CONTROL

CHANNEL SETUP

Auto Scan (Auto Tuning)

Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.

Run Auto Tuning again after any Antenna/Cable connection changes.

CONTROL CHANNEL / TV WATCHING

CHANNEL	Move	Enter
Auto Tuning
Manual Tuning
Channel Edit

CHANNEL	Move	Enter
Auto Tuning
Manual Tuning
Channel Edit
	Press ‘Yes’ button to begin
	auto tuning.
		Yes
		No

MENU

Select CHANNEL.

ENTER	Select Auto Tuning.
ENTER	Select Yes.
ENTER	Run Auto	tuning.

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

■A password is required to gain access to Auto Tuning menu if the Lock System is turned on.

56

Add/Delete Channel (Manual Tuning)

If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received.

CHANNEL	Move	Enter
Auto Tuning
Manual Tuning
Channel Edit

CHANNEL	Move	Enter
Auto Tuning
Manual Tuning		F	DTV	G
Channel Edit	Select channel type and
	RF-channel number.
	Channel			2
		DTV 2-0
		Bad	Normal	Good

Delete

Close

MENU

	Select CHANNEL.
ENTER	Select Manual Tuning.
3
ENTER	Select DTV, T V, CADTV, or CATV.
	Select channel you want to add
	or delete.

■A password is required to gain access to Manual Tuning menu if the Lock System is turned on.

5

ENTER

Select Add or Delete.

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

CONTROL CHANNEL / TV WATCHING

57

WATCHING TV / CHANNEL CONTROL

CHANNEL SETUP

Channel Editing

From the default channel list created from the Auto Tuning channel search, you can create two different types of channel lists in memory: “custom list” and “favorite channel list”.

A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray.

Once a channel is highlighted you can add or delete the channel by referring to the small window at the topright corner of the screen.

	TV WATCHING	CHANNEL	Move	Enter
	/
		Auto Tuning
	CHANNEL
		Manual Tuning
		Channel Edit
	CONTROL			Exit

MENU

Select CHANNEL.

ENTER

Select Channel Edit.

Select a channel.

MENU

RETURN

Select channel you want to add or delete.

Return to the previous menu.

Return to TV viewing.

58

INPUT LIST

Only these input signals which are connected to a TV can be activated and selected.

Antenna

Cable

AV1

AV2

Component1

1INPUT

ENTER

Antenna

Cable

AV1

AV2

Component1

Component2

HDMI4

HDMI3

HDMI2

HDMI1

RGB-PC

Except 32/37/42LG30, 37/42/47/52LG50

ie)

Disconnected input is inactivated.

Antenna

Cable

AV1

AV2

Select a desired

input source (except

Antenna or Cable). Then, you can select

RETURN Exit

your desired Input Label with using Q. MENU

Q.MENU

CONTROL CHANNEL / TV WATCHING

■You can also select the desired input source in the INPUT menu (Except 32/37/42 LG30).

INPUT

Move

Enter

Antenna

Cable

AV1

AV2

Component1

Component2

RGB-PC

HDMI1

E

■Antenna: Select it to watch over-the-air broadcasts.

■Cable: Select it to watch cable and digital cable.

■AV 1-2: Select them to watch a VCR or other external equipment.

■Component 1 - 2: Select them to watch DVD or a Digital set-top box.

■RGB-PC: Select it to view PC input.

■HDMI1-4: Select them to watch high definition devices.

59

WATCHING TV / CHANNEL CONTROL

CONTROL CHANNEL / TV WATCHING

INPUT LABEL

You can set a label for each input source when it's not in use.

OPTION	Move	Enter
Language	: English
Input Label
SIMPLINK	: On
Key Lock	: Off
Caption	: Off
ISM Method	: Normal
Power Saving	: Level 0
Set ID	: 1
	E

OPTION	Move	Enter
Language	: EnglishAV1		F	G
Input Label		AV2
SIMPLINK	: On	Component1
Key Lock	: Off	Component2
Caption	: Off
		RGB-PC
ISM Method
	: Normal
Power Saving		HDMI1		Except
	: Level 0
Set ID	: 1	HDMI2		32/37/42LG30,
	E	HDMI3
				37/42/47/52LG50
		HDMI4

Close

With using OPTION menu

MENU	Select OPTION.
ENTER	Select Input	Label.

ENTER

Select the source.

Select the label.

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

With using INPUT button

INPUT	Select the source.

Q. MENU

Select the label.

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

■When new external device is connected, this popup menu is displayed automatically. If selecting Yes, you can select input source that you want to appreciate.

■But, when selecting “SIMPLINK - O n” in HDMI mode, this popup menu is may not displayed.

!

New external device is connected. Do you want to enjoy this?

Yes

No

!Select input source that you want to appreciate.

AV1

AV2

Component1

60

AV MODE

You can select the optimal images and sounds.

	Off		Cinema
	Game		Sport

AV MODE

Press the AV MODE button repeatedly to select the desired source.

ENTER

■ If you select “Cinema” in AV mode, Cinema will be selected both for “PICTURE menu - Picture Mode” and “AUDIO menu - Sound Mode” respectively.

■ If you select “Off” in AV mode, the “Picture Mode” and “Sound Mode” return to previous selected value.

CONTROL CHANNEL / TV WATCHING

61

WATCHING TV / CHANNEL CONTROL

CONTROL CHANNEL / TV WATCHING

This function operates only with devices with the logo.

If connected other brand device with the logo, it may not work.

This allows you to control and play other AV devices connected with HDMI cable without additional cables and settings.

To start using SIMPLINK, turn it on in the user menus.

OPTION	Move	Enter
Language	: English
Input Label
SIMPLINK	: On
Key Lock	: Off
Caption	: Off
ISM Method	: Normal
Power Saving	: Level 0
Set ID	: 1
	E

	OPTION	Move		Enter
	Language	: English
	Input Label		Off
	SIMPLINK	: On
			On
	Key Lock	: Off
	Caption	: Off
	ISM Method	: Normal
	Power Saving	: Level 0
	Set ID	: 1
		E

MENU

Select OPTION.

ENTER

Select SIMPLINK.

ENTER	Select On or Off.

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

! NOTE

G Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable.

G When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device will stop.

G When you select a device with home theater functionality, the sound output automatically switches to the home theater speakers.

G If a connected SIMPLINK home theater system doesn't play the audio from the TV, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with an OPTICAL cable.

62

SIMPLINK Functions

■ect Play: After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.

■lect AV device: Enables you to select one of the AV devices connected to TV.

■

c playback: Control connected AV devices by pressing the

, ENTER, G, A, l l, FF and GG buttons.

■wer off all devices: When you power off the TV, all connected devices are turned off.

■itch audio-out: Offers an easy way to switch audio-out.

■nc Power on: When you play the connected AV device, TV will automatically turn on.

(A	which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide
this

Note: To operate SIMPLINK, an HDMI cable over Version 1.2 with *CEC function should be used. (*CEC: Consumer Electronics Control).

TV	SIMPLINK
		Display SIMPLINK menu.
	ENTER	Select the desired device.
	ENTER	Control connected AV devices.

SIMPLINK Menu

1	the previous TV
	channel regardless of the current mode.

2DISC playback: Select and play discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen.

3VCR playback: Control the connected VCR.

4 HDD Recordings playback: Control recordings stored in HDD.

5Audio Out to Home Theater speaker/Audio Out to TV: Select Home Theater speaker or TV speaker for Audio Out.

1

2

3

4

5

GWhen no device is connected (displayed in gray)

GSelected Device

GWhen a device is connected (displayed in bright color)

CONTROL CHANNEL / TV WATCHING

63

USB

* This feature is only for 37/42/47/52LG50, 32/37/42/47/52LG60, 32/42/47/52LG70, Plasma TV.

ENTRY MODES

USB

When you connect a USB device, this screen is displayed automatically.

In USB device, you can not add a new folder or delete the existing folder.

1 Connect the USB device to the USB IN jacks on the side of TV.

	■ It doesn’t support USB HDD
	■ This TV supports JPG and MP3.
	USB IN
	I IN 3
	Select the USB Eject menu before removing the
2	USB device.
	Select PHOTO LIST or MUSIC LIST

Q. MENU

Select USB Eject.

PHOTO LIST

MUSIC LIST

ENTER

ENTER

Precautions when using the USB device

G Only a USB storage device is recognizable.

G If the USB storage device is connected through a USB hub, the device is not recognizable.

G A USB storage device using an automatic recognition program may not be recognized.

G A USB storage device which uses its own driver may not be recognized.

G In case of a card reader, up to four memory cards are concurrently recognizable.

G The recognition speed of a USB storage device may depend on each device.

G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.

GPlease do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files or image files.

G Please use only a USB storage device which was formatted as a FAT or NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility program which is not supported by Windows, it may not be recognized.

G Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized.

G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized.

G Some USB storage devices may not be supported or operated smoothly.

G File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100 English characters.

G Please backup important files because data on USB device may be damaged. Data management is consumer's responsibility and as a result, the manufacturer does not cover data damage.

64

PHOTO LIST

You can view .JPG files from USB storage devices.

The On Screen Display on your model may be slightly different.

Supported photo file: *.JPG

■You can play JPG files only.

■Only baseline scan is supported among JPG.

USB

2

	MENU	Select USB.	ENTER	ENTER	Select PHOTO LIST.
				3	4	5
1			PHOTO LIST			USB Device
				Page 1/1	No Marked
2						Free Space 150MB
			TOP FOLDER
			Drive1
				Drive1
		2
				1
3
4			2Folders, 4Files
5		1	Upper
6
			Navigate			Exit

6

65

USB

Photo Selection and Popup Menu

USB

PHOTO LIST

USB Device

Page 1/1

No Marked

Free Space 150MB

TOP FOLDER

Drive1

Drive1

2Folders, 4Files

Upper

Navigate

CH

Exit

PHOTO LIST

USB Device

Page 1/1

No Marked

Free Space 150MB

Drive1

Butterfly

Upper	Photo	X.Box
		1366x768
		125KB

View

Mark

1366x768 125KB

Delete

Cancel

Upper

Navigate PopUp Menu CH Exit

When you select a file (not folder), this PopUp menu is displayed.

G View: Display the selected item.

screen. G Unmark All: Deselect all marked photos. G Delete: Delete the selected photo item. G Cancel: Close the pop-up menu.

1
2	ENTER		Select the desired photos.
3	ENTER	Show the Popup menu.
4		ENTER	Select the desired Popup menu.

■Use the CH button to navigation in the photo page.

■Use the FAV button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show.

66

Full Screen Menu

You can change the Photo List view so that it fills the screen. More operations are available in full screen mode.

PHOTO LIST

USB Device

Page 1/1

No Marked

Free Space 150MB

TOP FOLDER

Drive1

Drive1

2Folders, 4Files

USB

Upper

Navigate

CH

Exit

PHOTO LIST

USB Device

Page 1/1

No Marked

Free Space 150MB

Drive1

Butterfly

Upper	Photo	X.Box	1366x768
			125KB

View

				Mark All
1366x768 125KB				Delete
				Cancel				1/17
		Upper					Sideshow BGM	Delete Option Hide
	Navigate		CH	Exit
						The aspect ratio of a photo may change the size of

the photo displayed on the screen in full size.

1

2

ENTER

3

ENTER

4

5ENTER

Select the target folder or drive.

Select the desired photos.

Show the Popup menu.

Select View.

The selected photo is displayed in full size.

■Use the CH button to navigation in the photo page.

67

USB

1/17

	Sideshow	BGM	Delete Option Hide

USB

6Select the Sideshow, BGM, (Rotate),

ENTER	Delete, ption, or Hide.

■Use button to select the previous or next photo.

■ Use button to select and control the menu on the full-sized screen.

G Sideshow: Selected photos are displayed during the slide show. If no photo is selected, all photos in the current folder are displayed during slide show.

■Set the time interval of the slide show in Option.

■A slide show continues for a maximum of 4 hours. After 4 hours, the slide show will end and go to TV mode or external input mode.

G BGM: Listen to music while viewing photos in full size.

■Set the BGM device and album in Option. G (Rotate): Rotate photos.

■Rotates the photo 90°, 180°, 270°, 360° clockwise. G Delete: Delete photos.

G Option: Set values for Slide Speed and Music Folder.

■Use button and ENTER button to set values. Then go to and press ENTER to save the settings.

■You cannot change Music Folder while BGM is playing.

G Hide : Hide the menu on the full-sized screen.

■To see the menu again on the full-sized screen, press ENTER button to display.

Press F G to set the time interval between slides.

Slide Speed	Fast
Music Folder	...
ENTER	Cancel

! NOTE

G This TV will not be able to decode most JPEG images saved using the Progressive option.

68

MUSIC LIST

You can use the Music List menu to play MP3 files form a USB storage device.

This TV cannot play back copy-protected files.

The On Screen Display on your model may be slightly different.

Supported music file: *.MP3

Bit rate range 40Kbps ~ 320Kbps

• Sampling rate (Sampling Frequency) MPEG1 : 32000, 44100, 48000Hz MPEG2 : 16000, 24000, 22050Hz MPEG2.5 : 16 ~ 48KHz

1

MENU	ENTER	ENTER	Select MUSIC LIST.

			3	4	5
1	file		MUSIC LIST		USB Device
2	Preview: If any album jacket
			1/1	No Marked	Free Space 150MB
	for the file exists, this jack-		Drive1	Title	Play Time
	et is displayed.		Arirang	Upper
	Current page/Total pages			Arirang	04:12
	Total number of marked	2		Good Bye	05:30
	musics		3945 KB, 128 Kbps
	Usable USB memory	1
			Upper
	Corresponding buttons on
	the remote control		Navigate		Exit
			6

USB

69

USB

Music Selection and Popup Menu

Up to 6 music titles are listed per page.

MUSIC LIST								USB Device
			Page 1/1			No Marked
							Free Space 150MB
		Drive1				Title	Play Time
	Arirang					Upper

Arirang

04:12

					Good Bye	05:30
	3945 KB, 128 Kbps
		Upper
	Navigate			CH				Exit
MUSIC LIST							USB Device
				Page 1/1	No Marked
						Free Space 150MB
		Drive1
					Title	Play Time

Arirang

Upper

Arirang	3945 KB
	128 Kbps

					Good Bye	Play
						Play		with
	3945 KB, 128 Kbps					Mark		All
						Delete
		Upper				Cancel
	Navigate		PopUp Menu CH					Exit

G Play (During stop): Play the selected music. Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current folder will be played. If you go to a different folder and press the ENTER button, the current music in playback will stop.

G Play Marked: Play the selected musics. Once a music finishes playing, the next selected one will be played automatically.

G Stop Play (During playback): Stop the playing musics.

G Play with Photo: Start playing the selected musics and then move to the Photo List.

G Mark All: Mark all musics in the folder. G Unmark All: Deselect all marked music. G Delete: Delete the selected music.

G Cancel: Close the pop-up menu.

1

Select the target folder or drive.

2

	ENTER		Select the desired musics.
3	ENTER	Show the Popup menu.
4		ENTER	Select the desired Popup menu.

RETURN	Return to TV viewing

■Use the CH button to navigation in the music page.

■Use FAV button to mark or unmark a music file. If no music is marked, all the music in the folder will be played in sequence. When one or more music files are marked, the marked music files will be played in sequence. If you want to listen to only one song repeatedly, just mark that one file and play.

70

■The play information box (as shown below) will automatically move across the screen when there is no user input to prevent a fixed image remaining on the screen for a extended period of time.

USB

! NOTE

G When music is playing, is displayed in front of the music play time.

G A damaged or corrupted music file that does not play displays 00:00 as the play time.

G Music files with copy-protection will not play.

G Press ENTER, A , or RETURN button to stop the screen saver.

G This TV can not play music files less than 16 Kbytes.

71

PICTURE CONTROL

PICTURE SIZE (ASPECT RATIO) CONTROL

This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.

■ RGB-PC input source use 4:3 or 16:9 aspect ratio.

! NOTE

G If a fixed image is displayed on the screen for a long time, the image could become imprinted on the screen and remain visible.

This phenomenon is common to all manufacturers and is not covered by warranty. Although, after watching video that did not fill the screen, any after-image from the black bars will normally dissipate after a few minutes.

PICTURE	Picture Mode	: Standard
	PICTURE		Move		Enter
	Aspect Ratio	: 16:9
CONTROL		• Backlight	80
		• Tint	0	R	G
		• Contrast	90
		• Brightness	50
		• Sharpness	60
		• Color	60
		E

PICTURE		Move		Enter
Aspect Ratio	: 16:9
Picture Mode	: Standard
	• Backlight	80
	• Contrast	90		Set By Program
	• Brightness	50		4:3
	• Sharpness	60		16:9
	• Color	60		Zoom1
	• Tint	0	R	Zoom2 G
	E			Just Scan

MENU

ENTER

ENTER

RETURN

MENU

Select PICTURE.

■ You can also adjust Aspect Ratio in the Q-Menu.

Select Aspect Ratio.

Select the desired picture format.

Return to the previous menu.

Return to TV viewing.

72

Set by program

Selects the proper picture proportion to match the source’s image.

(4:3 4:3)

(16:9 16:9)

4:3

Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio.

16:9

Adjust the picture horizontally, in a linear proportion to fill the entire screen.

Zoom 1

Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.

Zoom 2

Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage.

Just Scan

Following selection will lead to you view the picture of best quality without loss of original picture in high resolution image.

Notes: If there are noise in original picture, you can see the noise at the edge.

Just Scan operates only in DTV/CADTV/Component/HDMI-DTV/DVI-DTV (720p/1080i/1080p) input source.

CONTROL PICTURE

73

PICTURE CONTROL

PRESET PICTURE SETTINGS

Picture Mode - Preset

There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually, or use the Intelligent Sensor.

CONTROL PICTURE

PICTURE		Move		Enter
Aspect Ratio	: 16:9
Picture Mode	: Standard
	• Backlight	80
	• Contrast	90
	• Brightness	50
	• Sharpness	60
	• Color	60
	• Tint	0	R	G
	E

PICTURE		Move	Enter
Aspect Ratio	: 16:9		Intelligent Sensor
Picture Mode	: Standard		Vivid

	• Backlight	80		Standard
	• Contrast	90		Cinema
	• Brightness	50		Sport
	• Sharpness	60		Game
	• Color	60		Expert1
	• Tint	0		R Expert2G
	E

MENU	Select PICTURE.
ENTER	Select Picture Mode.

Select Intelligent Sensor (Except

ENTER

32/37/42LG30, Plasma TV), Vivid, Standard, Cinema, Sport, or Game.

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

■Intelligent Sensor, Vivid, Standard, Cinema, Sport, and Game Settings are preset for the optimum picture quality at the factory and are not adjustable.

■When selecting Intelligent Sensor (Except 32/37/42LG30, Plasma TV), the most suitable picture is automatically adjusted according to the surrounding conditions.

■You can also adjust Picture Mode in the Q. Menu.

74

Color Tone - Preset

Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue.

PICTURE	Move		Enter
E
• Brightness	50
• Sharpness	60
• Color	60
• Tint	0	R	G
• Advanced Control
• Reset
Screen (RGB-PC)
TruMotion Demo

PICTURE	Move		Enter
E
• Brightness	50	Color Temperature		F Medium	G
• Sharpness	60	Fresh Contrast		Off
• Color	60	Fresh Color		Off
• Tint	0	R	G	Auto
		Noise Reduction
• Advanced ControlGamma				Medium	PICTURE
• Reset		TruMotion		High
Screen (RGB-PC)		Black Level		Low
TruMotion Demo		Eye Care		Off
		Real Cinema		Off	CONTROL
			Close

MENU

ENTER

Select PICTURE.

Select Advanced Control.

ENTER

Select Color Temperature.

4

Select Cool, Medium, or Warm.

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

75

PICTURE CONTROL

MANUAL PICTURE ADJUSTMENT

Picture Mode - User Mode

Adjust the picture appearance to suit your preference and viewing situations.

This feature is disable in “Picture Mode-Intelligent Sensor”.

CONTROL PICTURE

PICTURE		Move		Enter
Aspect Ratio	: 16:9
Picture Mode	: Standard				E
	• Backlight	80		• Backlight	80	E
	• Contrast	90			E
	• Brightness	50
	• Sharpness	60
	• Color	60
	• Tint	0	R	G
	E

MENU

	Select PICTURE.
ENTER	Select Picture Mode.
ENTER	Select Vivid, Standard, Cinema, Sport, or Game.
ENTER	Select Backlight (Only LCD TV), Contrast,
	Brightness, Sharpness, Color, or Tint.
ENTER	Make appropriate adjustments.

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

E

Enter

76

Picture Mode - Expert Control

By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users.

PICTURE		Move		Enter
Aspect Ratio	: 16:9			Intelligent Sensor
Picture Mode	: Standard			Vivid
	• Backlight	80		Standard
	• Contrast	90		Cinema
	• Brightness	50		Sport
	• Sharpness	60		Game
	• Color	60		Expert1
	• Tint	0	R Expert2G
	E

PICTURE	Move		Enter
E
• Brightness	50		Fresh Contrast	F	Off	G
• Sharpness	60		Noise Reduction		Off
• Color	60		Gamma		Medium
• Tint	0	R	G		Auto
• Expert Control			Black Level
			Real Cinema		Off
• Reset
			Color Standard		SD
Screen (RGB-PC)
TruMotion Demo			White Balance		Normal
			• Method		2 Points
			• Red Contrast		50
			• Green Contrast		50
			• Blue Contrast		50
			E

MENU	Select PICTURE.
ENTER	Select Picture	Mode.
ENTER	Select Expert1 or Expert2.
ENTER	Select Expert	Control.

ENTER	Select your desired menu option.
	Make appropriate adjustments.

7

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

CONTROL PICTURE

77

PICTURE CONTROL

PICTURE IMPROVEMENT TECHNOLOGY

Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection.

Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images.

	PICTURE	Move		Enter
	E
	• Brightness	50
	• Sharpness	60
PICTURE	• Color	60
	• Tint	0	R	G
	• Advanced Control
	• Reset
	Screen (RGB-PC)
CONTROL	TruMotion Demo

PICTURE	Move	Enter
	E

				Color Temperature						Medium
		• Sharpness	60	Fresh Contrast
									F	Off G
		• Color	60	Fresh Color
										Off
		• Tint	0	R			G
				Noise Reduction						Auto
		• Advanced		Gamma
		• Reset								Medium
				Black Level
		Screen (RGB-PC)								Low
				Eye Care
		TruMotion Demo								Off
				Real Cinema
										Off
				TruMotion
										High
								Close

MENU

Select PICTURE.

ENTER

ENTER

Select Advanced Control.

Select Fresh Contrast, Fresh Color,

Noise Reduction, or Gamma.

Select your desired options.

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

78

ADVANCED CONTROL - BLACK (DARKNESS) LEVEL

Adjusting the contrast and the brightness of the screen using the black level of the screen.

This feature is disable in DTV and PC mode.

PICTURE	Move		Enter
E
• Brightness	50
• Sharpness	60
• Color	60
• Tint	0	R	G
• Advanced Control
• Reset
Screen (RGB-PC)
TruMotion Demo

PICTURE	Move	Enter
	E

	• Brightness	50	Color Temperature						Medium
			Fresh Contrast
	• Sharpness	60							Off
	• Color	60	Fresh Color
									Off
	• Tint	0	R			G
			Noise Reduction						Auto
	• Advanced Control Gamma
									Medium
	• Reset		Black Level
	Screen (RGB-PC)							F	Low G
			Eye Care
	TruMotion Demo								Off
			Real Cinema
									Off
			TruMotion
									High
							Close

MENU

ENTER

ENTER

Select PICTURE.

Select Advanced Control.

Select Black Level.

■Low: The reflection of the screen gets darker.

■High: The reflection of the screen gets brighter.

■Auto: Realizing the black level of the screen and set it to High or Low automatically.

4

Select Low or High.

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

CONTROL PICTURE

79

PICTURE CONTROL

ADVANCED CONTROL - EYE CARE - LCD TV Only

Dims extremely bright pictures.

This feature is disable in “Picture Mode-Vivid, Cinema”.

CONTROL PICTURE

PICTURE	Move		Enter
E
• Brightness	50
• Sharpness	60
• Color	60
• Tint	0	R	G
• Advanced Control
• Reset
Screen (RGB-PC)
TruMotion Demo

PICTURE	Move	Enter
	E

	• Brightness	50		Color Temperature					Medium
				Fresh Contrast
	• Sharpness	60							Off
	• Color	60		Fresh Color
									Off
	• Tint	0	R		G
				Noise Reduction					Auto
	• Advanced Control			Gamma					Medium
	• Reset			Black Level
	Screen (RGB-PC)								Low
				Eye Care
	TruMotion Demo							F	Off G
				Real Cinema
									Auto
				TruMotion
									High
							Close

MENU

Select PICTURE.

ENTER	Select Advanced Control.
ENTER	Select Eye Care.

4

Select O n or Off.

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

80

ADVANCED CONTROL - REAL CINEMA / FILM MODE

Set up the TV for the best picture appearance for viewing movies.

When you operate Real Cinema/Film Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display.

This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode.

PICTURE	Move		Enter	PICTURE	Move		Enter
E				E
• Brightness	50			• Brightness	50	Color Temperature			Medium
• Sharpness	60			• Sharpness	60	Fresh Contrast			Off
• Color	60			• Color	60	Fresh Color			Off
• Tint	0	R	G	• Tint	0	R	G		Auto
• Advanced Control				• Advanced Control		Noise Reduction
						Gamma			Medium
• Reset				• Reset
						Black Level			Low
Screen (RGB-PC)				Screen (RGB-PC)
TruMotion Demo				TruMotion Demo		Film Mode		F	Off	G
						TruMotion			High
								Close

For Plasma TV

Color Temperature		Medium
Fresh Contrast		Off
Fresh Color		Off
Noise Reduction		Auto
Gamma		Medium
Black Level		Low
Eye Care		Off
Real Cinema	F	Off G
TruMotion		High

Close

For LCD TV

MENU	Select PICTURE.
ENTER	Select Advanced Control.
ENTER	Select Real Cinema or Film Mode.

4

Select O n or Off.

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

CONTROL PICTURE

81

PICTURE CONTROL

ADVANCED CONTROL - TRUMOTION

- Only 32/37/42/47/52LG60, 32/42/47/52LG70

TruMotion provides even better quality for movies than 3:2 Pull-Down conversions.

TruMotion means the panel supports faster frame rates that normal panels which makes for smoother motion in video. TruMotion LCD models support 120Hz instead of 60Hz. This means twice the information on the screen in the same amount of time and easier film conversions (120 is equally divisible by 24, so no interpretations or double frames are needed).

TruMotion works with all inputs except PC mode.

	PICTURE	Move		Enter
	E
	• Brightness	50
	• Sharpness	60
	• Color	60
	• Tint	0	R	G
	• Advanced Control
CONTROLPICTURE	• Reset
	Screen (RGB-PC)
	TruMotion Demo

PICTURE	Move	Enter
	E

	• Brightness	50	Color Temperature						Medium
	• Sharpness	60
			Fresh Contrast						Off
	• Color	60	Fresh Color
									Off
	• Tint	0		R		G
			Noise Reduction						Auto
	• Advanced Control
	• Reset		Gamma						Medium
	Screen (RGB-PC)		Black Level						Low
			Eye Care
	TruMotion Demo								Off
			Real Cinema						Auto
			TruMotion
								F	High G
							Close

MENU

Select PICTURE.

ENTER	Select Advanced Control.
ENTER	Select TruMotion.

4

Select Off, Low, or High.

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

■High: Provides smoother picture movement.

■Low: Provides smooth picture movement. Use this setting for standard use.

■Off: Use this setting when “High”and “Low” setting result in noise.

■If you enable "TruMotion", noise may appear on the screen.

If this occurs, set "TruMotion" to "Off".

82

TRUMOTION DEMO - Only 32/37/42/47/52LG60, 32/42/47/52LG70

Use this feature to see the difference TruMotion makes.

TruMotion works with all inputs except PC mode.

PICTURE	Move		Enter
E
• Brightness	50
• Sharpness	60
• Color	60
• Tint	0	R	G
• Advanced Control
• Reset
Screen (RGB-PC)			TruMotion On	TruMotion Off
TruMotion Demo

MENU	Select PICTURE.
ENTER	Select TruMotion Demo.
ENTER	Select TruMotion On or Off.
MENU	Stop TruMotion.

CONTROL PICTURE

83

PICTURE CONTROL

PICTURE RESET

Settings of the selected picture modes return to the default factory settings.

	PICTURE	Move		Enter
	E
	• Brightness	50
	• Sharpness	60
	• Color	60
	• Tint	0	R	G
CONTROLPICTURE	• Advanced Control
	• Reset
	Screen (RGB-PC)
	TruMotion Demo

PICTURE	Move		Enter
• Brightness	50
• Sharpness	60
• Color	60
• Tint	0	R	G
i	Resetting video configuration...
• Advanced Control
• Reset
Screen (RGB-PC)
TruMotion Demo

MENU

Select PICTURE.

ENTER

Select Reset.

ENTER

Initialize the adjusted value.

MENU

Return to TV viewing.

84