LG Electronics USA 47LG60UA User Manual

WATCHING TV / CHANNEL CONTROL

CHANNEL SETUP

WATCHING TV /CHANNEL CONTROL

Auto Scan (Auto Tuning)

Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the

channel list.

Run Auto Tuning again after any Antenna/Cable connection changes.

Select

CHANNEL

Select

Auto TTuning

Select

Ye s

Run

Auto ttuning

Enter

Move

CHANNEL

Enter

Move

CHANNEL

ENTER

Auto Tuning

Manual Tuning

Channel Edit

Auto Tuning

Manual Tuning

Channel Edit

Press ‘Yes’ button to begin

auto tuning.

Yes

■

A password is required to gain access to

Auto Tuning menu if the Lock System is

turned on.

RETURN

Return to the previous menu.

Return to TV viewing.

WATCHING TV / CHANNEL CONTROL

Select

CHANNEL

ENTER

If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality

of the signal being received.

Add/Delete Channel (Manual Tuning)

Enter

Move

CHANNEL

Enter

Move

CHANNEL

Channel

Select channel type and

RF-channel number.

DTV

Delete

Auto Tuning

Manual Tuning

Channel Edit

DTV 2-0

Bad Normal Good

Select

Manua l TTunin g

Select

DT V

T V

CADTV

, or

CATV

Select channel you want to add

or delete.

ENTER

Select

Add

Delete

ENTER

Auto Tuning

Manual Tuning

Channel Edit

■

A password is required to gain access to

Manual Tuning menu if the Lock System

is turned on.

RETURN

Return to the previous menu.

Return to TV viewing.

WATCHING TV / CHANNEL CONTROL

CHANNEL SETUP

WATCHING TV / CHANNEL CONTROL

Select a channel.

Select channel you want to add or

delete.

ENTER

From the default channel list created from the Auto Tuning channel search, you can create two different types

of channel lists in memory: “custom list” and “favorite channel list”.

A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom

List are displayed in black and the channels deleted from the Custom List are displayed in gray.

Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-

right corner of the screen.

Channel Editing

Enter

Move

CHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Select

CHANNEL

ENTER

Select

Channe l EEdit

RETURN

Return to TV viewing.

Return to the previous menu.

Add/Delete

Move Page

Move

Exit

RETURN

WATCHING TV / CHANNEL CONTROL

INPUT LIST

Only these input signals which are connected to a TV can be activated and selected.

Select the desired input source.

INPUT

■

You can also select the desired input source in

the

INPUT

menu (Except 32/37/42 LG30).

Antenna Cable AV1 AV2 Component1

HDMI4 HDMI3 HDMI2 HDMI1 RGB-PC

Component2

Antenna Cable AV1 AV2 Component1

ENTER

■

Antenna

: Select it to watch over-the-air

broadcasts.

■

Cable

: Select it to watch cable and dig-

ital cable.

■

AV 11-2

: Select them to watch a VCR or

other external equipment.

■

Co m p on e nt 11- 2

: Select them to

watch DVD or a Digital set-top box.

■

RGB-PC

: Select it to view PC input.

■

HDMI1-4

: Select them to watch high

definition devices.

Enter

Move

Antenna

Cable

AV1

AV2

Component1

Component2

RGB-PC

HDMI1

INPUT

Except 32/37/42LG30, 37/42/47/52LG50

Antenna Cable AV1 AV2 Component1

Input Label

Q.MENU

Exit

RETURN

Select a desired input source (except

An ten na

Ca ble

). Then, you can select

your desired Input Label with using Q. MENU

button.

p.60

Disconnected input is inactivated.

ie)

WATCHING TV / CHANNEL CONTROL

INPUT LABEL

WATCHING TV / CHANNEL CONTROL

You can set a label for each input source when it's not in use.

Enter

Move

OPTION

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

AV1

AV2

Component1

Component2

RGB-PC

HDMI1

HDMI2

HDMI3

HDMI4

F G

Except

32/37/42LG30,

37/42/47/52LG50

Select

OPTION

Select

Input LLabel

Select the label.

ENTER

Select the source.

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

With using OPTION menu

Select the source.

Select the label.

INPUT

Q. MENU

RETURN

Return to the previous menu.

Return to TV viewing.

With using INPUT button

■

When new external device is connected, this popup menu is displayed automatically.

If selecting

Yes

, you can select input source that you want to appreciate.

■

But, when selecting “

SIMPL I N K

O n

” in HDMI mode, this popup menu is may not displayed.

Yes

New external device is connected.

Do you want to enjoy this?

Select input source that you want to appreciate.

AV1

AV2

Component1

WATCHING TV / CHANNEL CONTROL

AV MODE

You can select the optimal images and sounds.

AV MODE

Off Cinema

Game Sport

Press the

AV MMODE

button repeatedly to select the desired source.

ENTER

■

If you select “

Cinema

” in AV mode,

Cinema

will be selected both for “PIC-

TURE menu - Picture Mode” and “AUDIO

menu - Sound Mode” respectively.

■

If you select “

Of f

” in AV mode, the

“

Pictur e MMo de

” and “

Sound MMode

”

return to previous selected value.

WATCHING TV / CHANNEL CONTROL

This function operates only with devices with the logo.

If connected other brand device with the logo, it may not work.

This allows you to control and play other AV devices connected with HDMI cable without additional cables and

settings.

To start using SIMPLINK, turn it on in the user menus.

Enter

Move

OPTION

Select

OPTION

Select

SIMPLINK

Select

Of f

Enter

Move

OPTION

ENTER

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

Off

NOTE

Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the

SIMPLINK device with the HDMI cable.

When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device

will stop.

When you select a device with home theater functionality, the sound output automatically switches to

the home theater speakers.

If a connected SIMPLINK home theater system doesn't play the audio from the TV, connect the DIGITAL

AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIM-

PLINK device with an OPTICAL cable.

RETURN

Return to the previous menu.

Return to TV viewing.

WATCHING TV / CHANNEL CONTROL

■

Dire c t PPlay:

After connecting AV devices to the TV, you can directly control the devices and play media with-

out additional settings.

■

Sel e c t AA V ddevic e :

Enables you to select one of the AV devices connected to TV.

■

Di s c pplayb ack:

Control connected AV devices by pressing the ,

ENTER,

l ll

and

buttons.

■

Po wer ooff aall dde vices:

When you power off the TV, all connected devices are turned off.

■

Swi t c h aaudio-ou t :

Offers an easy way to switch audio-out.

■

Syn c PP o w er oo n :

When you play the connected AV device, TV will automatically turn on.

(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide

this function)

Note: To operate SIMPLINK, an HDMI cable over Version 1.2 with *CEC function should be used. (*CEC: Consumer

Electronics Control).

SIMPLINK Menu

TV vview i n g

: Switch to the previous TV

channel regardless of the current mode.

DISC pp layback

: Select and play discs.

When multiple discs are available, the titles

of discs are conveniently displayed at the

bottom of the screen.

VCR pplayback

: Control the connected

VCR.

HDD RRecor d i n gs ppla y b ack

: Control

recordings stored in HDD.

Aud i o OO u t tto HHom e TT heater sspeak-

er/ A u d io OOut tt o TT V

: Select Home

Theater speaker or TV speaker for Audio

Out.

SIMPLINK Functions

When no device is connected

(displayed in gray)

Selected Device

When a device is connected

(displayed in bright color)

Display

SIMPLINK

menu.

Select the desired device.

Control connected AV devices.

SIMPLINK

ENTER

ENTRY MODES

USB

When you connect a USB device, this screen is displayed automatically.

In USB device, you can not add a new folder or delete the existing folder.

Precautions when using the USB device

Only a USB storage device is recognizable.

If the USB storage device is connected through a

USB hub, the device is not recognizable.

A USB storage device using an automatic recogni-

tion program may not be recognized.

A USB storage device which uses its own driver

may not be recognized.

In case of a card reader, up to four memory cards

are concurrently recognizable.

The recognition speed of a USB storage device

may depend on each device.

Please do not turn off the TV or unplug the USB

device when the connected USB storage device is

working. When such device is suddenly separated

or unplugged, the stored files or the USB storage

device may be damaged.

Please do not connect the USB storage device

which was artificially maneuvered on the PC. The

device may cause the product to malfunction or

fail to be played. Never forget to use only a USB

storage device which has normal music files or

image files.

Please use only a USB storage device which was

formatted as a FAT or NTFS file system provided

with the Windows operating system. In case of a

storage device formatted as a different utility pro-

gram which is not supported by Windows, it may

not be recognized.

Please connect power to a USB storage device

which requires an external power supply. If not,

the device may not be recognized.

Please connect a USB storage device with cable is

offered by USB maker. If connected with cable is

not offered by USB maker or an excessively long

cable, the device may not be recognized.

Some USB storage devices may not be supported

or operated smoothly.

File alignment method of USB storage device is

similar to Window XP and filename can recognize

up to 100 English characters.

Please backup important files because data on

USB device may be damaged. Data management is

consumer's responsibility and as a result, the man-

ufacturer does not cover data damage.

When removing the USB device

Connect the USB device to the

USB IIN

jacks on the side of TV.

Select

PHOTO LLIST

MUSIC LIST

PHOTO LIST MUSIC LIST

Select

USB EEject

Select the

USB EEject

menu before removing the

USB device.

ENTER

Q. MENU

ENTER

* This feature is only for 37/42/47/52LG50, 32/37/42/47/52LG60, 32/42/47/52LG70, Plasma TV.

■

It doesn’t support USB HDD

■

This TV supports JPG and MP3.

PHOTO LIST

USB

You can view .JPG files from USB storage devices.

The On Screen Display on your model may be slightly different.

Screen Components

Moves to upper level file

Preview: Display the

thumbnail/folder name of

the photo in the selected

folder

Current page/Total pages

Total number of marked photos

Usable USB memory

Corresponding buttons on

the remote control

Supported photo file:

.JPG

■

You can play JPG files only.

■

Only baseline scan is supported among JPG.

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

Navigate PopUp Menu Move Page Mark Exit

2Folders, 4Files

3 4

Select

US B

Select

PHOTO LL I S T

TOP FOLDER

Drive1

ENTER

Drive1

FAV

RETURN

USB

Photo Selection and Popup Menu

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

2Folders, 4Files

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

1366

768 125KB

Select the target folder or drive.

Select the desired photos.

Show the Popup menu.

■

Use the

button to navigation in the

photo page.

■

Use the

FAV

button to mark or unmark a

photo. When one or more photos are marked,

you can view individual photos or a slide show

of the marked photos. If no photos are marked,

you can view all photos individually or all pho-

tos in the folder in a slide show.

TOP FOLDER

Drive1

Select the desired Popup menu.

ENTER

Navigate Move Page Mark Exit

FAV

RETURN

PopUp Menu

Navigate Move Page Mark Exit

FAV

RETURN

PopUp Menu

Drive1

Butterfly

Upper Photo X.Box

1366x768

125KB

View

Mark All

Delete

Cancel

When you select a file (not folder), this PopUp

menu is displayed.

View

: Display the selected item.

Mark AAll

: Mark all photos on the screen.

Unmark AAll

: Deselect all marked photos.

Delete

: Delete the selected photo item.

Cancel

: Close the pop-up menu.

USB

Full Screen Menu

You can change the Photo List view so that it fills the screen. More operations are available in full

screen mode.

■

Use the

button to navigation in the

photo page.

The aspect ratio of a photo may change the size of

the photo displayed on the screen in full size.

1/17

Sideshow BGM Delete Option Hide

Select the target folder or drive.

Select the desired photos.

Show the Popup menu.

Select

View

The selected photo is displayed in

full size.

ENTER

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

2Folders, 4Files

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

1366

768 125KB

TOP FOLDER

Drive1

Navigate Move Page Mark Exit

FAV

RETURN

PopUp Menu

Navigate Move Page Mark Exit

FAV

RETURN

PopUp Menu

Drive1

Butterfly

Upper Photo X.Box

1366x768

125KB

View

Mark All

Delete

Cancel

USB

1/17

Sideshow B GM Delete Option Hide

Select the

Sideshow

BGM

(Rotate)

Delete

Option

, or

Hide.

Press

F GG

to set the time interval between slides.

Slide Speed

Fast

Cancel

...

Music Folder

ENTER

■

Use button to select the previous or

next photo.

■

Use button to select and control

the menu on the full-sized screen.

ENTER

Sideshow

: Selected photos are displayed during the

slide show. If no photo is selected, all photos in the cur-

rent folder are displayed during slide show.

■

Set the time interval of the slide show in

Option

■

A slide show continues for a maximum of 4 hours.

After 4 hours, the slide show will end and go to TV

mode or external input mode.

BG M

: Listen to music while viewing photos in full size.

■

Set the BGM device and album in

Option

(Rotate)

: Rotate photos.

■

Rotates the photo 90°, 18 0 °, 270°, 360° clockwise.

Delete

: Delete photos.

Option

: Set values for

Slide SSp e e d

and

Music

Folder

■

Use button and

ENTER

button to set values.

Then go to and press

ENTER

to save the set-

tings.

■

You cannot change

Music FFolde r

while BGM is

playing.

Hide

: Hide the menu on the full-sized screen.

■

To see the menu again on the full-sized screen, press

ENTER

button to display.

NOTE

This TV will not be able to decode

most JPEG images saved using the

Progressive option.

MUSIC LIST

USB

You can use the Music List menu to play MP3 files form a USB storage device.

This TV cannot play back copy-protected files.

The On Screen Display on your model may be slightly different.

Screen Components

Supported music file:

.MP3

Bit rate range 40Kbps ~ 320Kbps

• Sampling rate (Sampling Frequency)

MPEG1 : 32000, 44100, 48000Hz

MPEG2 : 16000, 24000, 22050Hz

MPEG2.5 : 16 ~ 48 KHz

Moves to upper level file

Preview: If any album jacket

for the file exists, this jack-

et is displayed.

Current page/Total pages

Total number of marked

musics

Usable USB memory

Corresponding buttons on

the remote control

Select

US B

Select

MUSIC LL I S T

ENTER

USB Device

MUSIC LIST

Upper

Free Space 150MB

3945 KB, 128 Kbps

Title Play Time

Upper

Good Bye

Arirang 04:12

05:30

3 4

Navigate PopUp Menu Move Page Mark Exit

FAV

RETURN

Page 1/1

No Marked

Drive1

Arirang

USB

Music Selection and Popup Menu

■

Use the

button to navigation in

the music page.

■

Use

FAV

button to mark or unmark a music

file. If no music is marked, all the music in the

folder will be played in sequence. When one or

more music files are marked, the marked music

files will be played in sequence. If you want to

listen to only one song repeatedly, just mark

that one file and play.

Up to 6 music titles are listed per page.

Select the target folder or drive.

Select the desired musics.

Show the Popup menu.

Select the desired Popup menu.

ENTER

RETURN

Return to TV viewing

USB Device

Page 1/1

No Marked

MUSIC LIST

Upper

Free Space 150MB

3945 KB, 128 Kbps

Drive1

Arirang

Navigate Move Page Mark Exit

FAV

RETURN

PopUp Menu

Play TimeTitle

Upper

Good Bye

Arirang

USB Device

Page 1/1

No Marked

MUSIC LIST

Upper

Free Space 150MB

3945 KB, 128 Kbps

Drive1

Arirang

Navigate Move Page Mark Exit

FAV

RETURN

PopUp Menu

Play TimeTitle

Upper

Good Bye

Arirang

05:30

04:12

3945 KB

128 Kbps

Play

Play with Photo

Mark All

Delete

Cancel

Play

(During stop): Play the selected music.

Once a song finishes playing, the next selected

one will be played. When there are no selected

musics to play, the next one in the current fold-

er will be played. If you go to a different folder

and press the

ENTER

button, the current

music in playback will stop.

Play MMarked

: Play the selected musics. Once

a music finishes playing, the next selected one

will be played automatically.

Stop PPlay

(During playback): Stop the play-

ing musics.

Play wwit h PPhoto

: Start playing the selected

musics and then move to the Photo List.

Mark AAll

: Mark all musics in the folder.

Unmark AAll

: Deselect all marked music.

Delete

: Delete the selected music.

Cancel

: Close the pop-up menu.

USB

■

The play information box (as shown below) will automatically

move across the screen when there is no user input to pre-

vent a fixed image remaining on the screen for a extended

period of time.

NOTE

When music is playing, is displayed in front of the music play time.

A damaged or corrupted music file that does not play displays 00:00 as the play time.

Music files with copy-protection will not play.

Press

ENTER

, or

RETURN

button to stop the screen saver.

This TV can not play music files less than 16 Kbytes.

PICTURE CONTROL

PICTURE SIZE (ASPECT RATIO) CONTROL

PICTURE CONTROL

This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.

■

RGB-PC input source use 4:3 or 16:9 aspect ratio.

NOTE

If a fixed image is displayed on the screen for a long time, the image could become imprinted on the

screen and remain visible.

This phenomenon is common to all manufacturers and is not covered by warranty. Although, after watch-

ing video that did not fill the screen, any after-image from the black bars will normally dissipate after a few

minutes.

■

You can also adjust

Aspect RRatio

the

Q-Menu

Enter

Move

PICTURE

Enter

Move

PICTURE

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

Set By Program

4:3

16:9

Zoom1

Zoom2

Just Scan

Select

PICTURE

Select

Aspect RRatio

Select the desired picture format.

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

PICTURE CONTROL

Set by program

Selects the proper picture proportion to match

the source’s image.

4:3

Choose 4:3 when you want to view a picture

with an original 4:3 aspect ratio.

16:9

Adjust the picture horizontally, in a linear pro-

portion to fill the entire screen.

Zoom 1

Choose Zoom 1 when you want to view the pic-

ture without any alteration. However, the top and

bottom portions of the picture will be cropped.

Zoom 2

Choose Zoom 2 when you want the picture to be

altered, both vertically extended and cropped.

The picture taking a halfway trade off between

alteration and screen coverage.

Just Scan

Following selection will lead to you view the pic-

ture of best quality without loss of original pic-

ture in high resolution image.

Notes: If there are noise in original picture, you

can see the noise at the edge.

Just SS c a n

operates only in

DTV/CADTV/Component/HDMI-DTV/DVI-DTV

(720p/1080i/1080p) input source.

(4:3 4:3)

(16:9 16:9)

PICTURE CONTROL

PRESET PICTURE SETTINGS

PICTURE CONTROL

Picture Mode - Preset

There are factory presets for picture settings available in the user menus. You can use a preset, change each

setting manually, or use the Intelligent Sensor.

Enter

Move

PICTURE

Select

PICTURE

Select

Pictur e MM o d e

Select

In t elli gent SS e nsor

(Except

32/37/42LG30, Plasma TV),

Viv i d

Sta ndard

Cin e ma

Spo r t

, or

Game

■

In t elli gent SS enso r

Viv i d

Sta ndard

Ci nema

Spo r t

, and

Game

Settings are

preset for the optimum picture quality at

the factory and are not adjustable.

■

When selecting

Int e lligen t SS ensor

(Except 32/37/42LG30, Plasma TV),

the most suitable picture is automatically

adjusted according to the surrounding

conditions.

■

You can also adjust

Pictur e MMode

the

Q. MM enu

Enter

Move

PICTURE

ENTER

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

Intelligent Sensor

Vivid

Standard

Cinema

Sport

Game

Expert1

Expert2

RETURN

Return to the previous menu.

Return to TV viewing.

PICTURE CONTROL

Color Tone - Preset

Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to

cool to see less intense colors with more blue.

Enter

Move

PICTURE

Select

PICTURE

Select

Colo r TTempe r a t u r e

ENTER

Select

Cool

Medium

, or

Warm

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Select

Advan c e d CContr o l

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Auto

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Off

TruMotion

High

PICTURE CONTROL

MANUAL PICTURE ADJUSTMENT

PICTURE CONTROL

Picture Mode - User Mode

Adjust the picture appearance to suit your preference and viewing situations.

This feature is disable in “

Pict u r e MM ode-Intel l i g e nt SSens o r

”.

Enter

Move

PICTURE

Select

PICTURE

Make appropriate adjustments.

Select

Backlig h t

(Only LCD TV),

Contrast

Brightn e s s

Sharpness

Color

, or

Tint

Select

Pictur e MM o d e

ENTER

Select

Viv i d

Sta ndard

Cin e ma

Spo r t

, or

Game

ENTER

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Backlight 80

Enter

RETURN

Return to the previous menu.

Return to TV viewing.

PICTURE CONTROL

Select your desired menu option.

Select

PICTURE

Select

Pictur e MM o d e

Select

Exper t CControl

Select

Expert1

Expert2

ENTER

Make appropriate adjustments.

Picture Mode - Expert Control

By segmenting categories,

Expert1

and

Expert2

provide more categories which users can set as they see

fit, offering the optimal picture quality for users.

Enter

Move

PICTURE

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

Intelligent Sensor

Vivid

Standard

Cinema

Sport

Game

Expert1

Expert2

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Expert Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Off

Fresh Contrast

Noise Reduction

Off

Gamma

Medium

Black Level

Auto

Off

Real Cinema

Color Standard

White Balance

Normal

• Method

2 Points

• Red Contrast

• Green Contrast

• Blue Contrast

PICTURE CONTROL

PICTURE IMPROVEMENT TECHNOLOGY

PICTURE CONTROL

Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection.

Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors.

Noise Reduction: Removes interference up to the point where it does not damage the original picture.

Gamma: High gamma values display whitish images and low gamma values display high contrast images.

Select

PICTURE

Select

Advan c e d CContr o l

Select

Fresh CContrast

Fresh CColor

Noise RReductio n

, or

Gamma

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Select your desired options.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Auto

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Off

TruMotion

High

PICTURE CONTROL

ADVANCED CONTROL - BLACK (DARKNESS) LEVEL

Adjusting the contrast and the brightness of the screen using the black level of the screen.

This feature is disable in DTV and PC mode.

Select

PICTURE

Select

Advan c e d CContr o l

Select

Black LLevel

ENTER

Select

Lo w

High

■

Lo w

: The reflection of the screen gets

darker.

■

High

: The reflection of the screen gets

brighter.

■

Auto

: Realizing the black level of the

screen and set it to High or Low auto-

matically.

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Auto

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Off

TruMotion

High

PICTURE CONTROL

ADVANCED CONTROL - EYE CARE -

LCD TV Only

PICTURE CONTROL

Dims extremely bright pictures.

This feature is disable in “

Pict u r e MM o d e-Vivid

Cinema

”.

Select

PICTURE

Select

Advan c e d CContr o l

Select

Eye CCare

ENTER

Select

O n

Of f

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Auto

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Auto

TruMotion

High

PICTURE CONTROL

ADVANCED CONTROL - REAL CINEMA / FILM MODE

Set up the TV for the best picture appearance for viewing movies.

When you operate Real Cinema/Film Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will

adjust 24 fps video from movies to 30 fps video for display.

This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i,

and HDMI 1080i mode.

Select

PICTURE

Select

Advan c e d CContr o l

Select

Real CCinema

Film MMode

ENTER

Select

O n

Of f

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Auto

Gamma

Medium

Black Level

Low

Film Mode

Off

TruMotion

High

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Auto

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Off

TruMotion

High

For Plasma TV

For LCD TV

PICTURE CONTROL

ADVANCED CONTROL - TRUMOTION

Only 32/37/42/47/52LG60, 32/42/47/52LG70

PICTURE CONTROL

TruMotion provides even better quality for movies than 3:2 Pull-Down conversions.

TruMotion means the panel supports faster frame rates that normal panels which makes for smoother motion

in video. TruMotion LCD models support 120Hz instead of 60Hz. This means twice the information on the

screen in the same amount of time and easier film conversions (120 is equally divisible by 24, so no interpre-

tations or double frames are needed).

TruMotion works with all inputs except PC mode.

Select

PICTURE

Select

Advan c e d CContr o l

Select

TruMotio n

ENTER

■

Hi gh

: Provides smoother picture movement.

■

Lo w

: Provides smooth picture movement.

Use this setting for standard use.

■

Of f

: Use this setting when “High”and

“Low” setting result in noise.

■

If you enable "TruMotion", noise may

appear on the screen.

If this occurs, set "TruMotion" to "Off".

Select

Of f

Lo w

, or

High

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Auto

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Auto

TruMotion

High

PICTURE CONTROL

TRUMOTION DEMO -

Only 32/37/42/47/52LG60, 32/42/47/52LG70

Select

PICTURE

Select

TruMo t i o n DD e m o

Stop

TruMotio n

ENTER

Select

TruMo t i o n OOn

Off.

ENTER

TruMotion On

TruMotion Off

Use this feature to see the difference TruMotion makes.

TruMotion works with all inputs except PC mode.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

PICTURE CONTROL

PICTURE RESET

PICTURE CONTROL

Settings of the selected picture modes return to the default factory settings.

Select

PICTURE

Select

Reset

Initialize the adjusted value.

ENTER

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Resetting video configuration...

+ 66 hidden pages