LG Electronics USA 42PX5DUB User Manual

Owner’s Manual 55

Operation

When finished, press ENTER to highlight Schedule Recording.

Press ENTER again to close the menu. You see a Record icon for

the selected frequency next to the show title.

Highlight Cancel to close the menu, change no information, and

return to the highlighted show.

3) Manual Recording

• Highlight the Schedule Service label, and press Menu to display

the Schedule Options menu.

• Use the

D / E

/ F / G

buttons to move through the options. Use

the number or the

D / E

/ F / G

buttons to change the informa-

tion, as necessary.

• Highlight New Manual Recording and press ENTER to display

the Record Options menu.

• Current information (i.e., date, start and end times, channel,

input) is displayed.

• Recorder choice: Please choose the VCR only. This TV does

not provide other devices with a recording feature.

56 Plasma TV

Operation

TV Guide On Screen

System

• Use the left and right arrows to choose between Once, Daily,

Weekly, and Off, as follows.

W Once —records the time, channel, input, recorder combi

nation one time.

W Daily —records the time, channel, input,recorder combi

nation Monday through Friday.

W Weekly —records the time, channel, input, recorder

combination once a week on this selected day of the week

W Off (not cancel) —keeps the time, channel, input, recorder

combination in the list without recording until the frequency is

changed.

Record Conflict

A conflict message appears for the following reasons:

• a show set to Record overlaps with any part of another show pre-

viously set to Record,

• a show set to Record overlaps with a show previously set to auto-

tune

Select one of these options:

W record anyway - this show will override an existing show set to

Record or auto-tune

W don't record this show - cancel the Recording

Before a recording begins, a notification screen appears

if your TV is On. At that time, you can choose to start or

cancel recording. If the TV is not On, the recording

occurs as scheduled. If there is no activity for 3 minutes,

the notification screen automatically closes and com-

pletes the highlighted item.

When finished, press ENTER to highlight Schedule

Recording.

Press ENTER again to close the menu. You see a

Record icon for the selected frequency next to the show

title.

Note: Manual recording is listed by channel number.

Highlight Cancel to close the menu, change no informa-

tion, and return to the highlighted show.

Owner’s Manual 57

Operation

You can set a show to Reminder in Listings, Search, and Schedule

or change Reminder settings for a show in Schedule.

There are 2 ways to set a show to Reminder:

1) From a Panel Menu

• Highlight a show, and press Menu to display the Episode Options

menu.

• Highlight Set Reminder, and press ENTER to display the Remind

Options menu.

• Highlight the Frequency option, and use the left and right arrows

to choose between:

W Once —sets a show reminder one time

W Regularly —sets a show reminder every time the show

airs on the same channel and starts at the same time

W Weekly —sets a show reminder each time the show airs

on the same day of the week, on the same channel and starts

at the same time

W Off —keeps the show in the list but will not remind until

the frequency is changed

• Power On the TV, if Off, when a Reminder is scheduled. Choices

are Yes and No. (Default = No)

• Automatically tune the TV to the channel (TV must be On), when

a Reminder is scheduled. Choices are Yes and No. (Default =

No)

• When to display the reminder screen. Choices are 30 seconds

to 15 minutes early, to 30 seconds to 15 minutes late, to On time.

(Default = 1 min early)

When finished, press ENTER to highlight Schedule Reminder.

Press ENTER again to close the menu. You see a Remind icon for

the selected frequency next to the show title.

Highlight Cancel to close the menu, change no information, and

return to the highlighted show.

Remind

58 Plasma TV

Operation

TV Guide On Screen

System

2) Manual Reminder

• Highlight the Schedule Service label, and press the Menu key to

display the Schedule Options menu.

• Use the

D / E

/ F / G

buttons to move through the options. Use

the number or

D / E

/ F / G

buttons to change the information, as

necessary.

• Highlight New Manual Reminder and press the ENTER key to dis-

play the Remind Options menu.

• Current information (i.e., date, start and end times, channel, input,

frequency, etc.) is displayed.

• Highlight the Frequency option, and use the

F / G buttons to

choose among Once, Daily, Weekly, and Off, as follows.

W Once —sets a show reminder for the time, channel, input,

recorder combination one time

W Daily —reminds for the time, channel, input, recorder com-

bination Monday through Friday

W Weekly —sets a show reminder for the time, channel, input,

recorder combination once a week on this selected day of the

week

W Off (not cancel) —keeps the time, channel, input, destina-

tion combination in the list without reminding until the frequency

is changed

• Power On the TV, if Off, when a Reminder is scheduled. Choices

are Yes and No (Default =No).

• Automatically tune the TV to the channel (TV must be On), when

a Reminder is scheduled. Choices are Yes and No (Default = No).

When finished, press ENTER to highlight Schedule Reminder.

Press ENTER again to close the menu. You see a Remind icon for

the selected frequency next to the show title.

Note: Manual reminder is listed by channel number.

Highlight Cancel to close the menu, change no information, and

return to the highlighted show.

Owner’s Manual 59

Operation

Based on your option settings, a notification screen will

appear, if your TV is On at the reminder time. You can

then choose to hide the reminder, or highlight the show,

and press ENTER to tune to the show. If there is no activ-

ity for 3 minutes, the notification screen automatically

closes and completes the highlighted item (hide

reminders).

If you choose Hide Reminders, the window closes for the

show or shows, but does not affect other Reminders you

set.

Note: If more than 2 reminders are set for the same time,

arrows appear on the Reminder screen. Use the

D/E

buttons to view the shows.

Remind Conflict

A conflict message appears for the following reasons:

• a show set with an Auto-Tune Reminder has the same

start time as an existing Auto-Tune Reminder.

• If you are using a cable box, a show set with an Auto-

Tune Reminder overlaps with a Recording already

scheduled.

Select one of these options:

W auto-tune anyway - this show will override an existing

show set to auto-tune

W proceed, no auto-tune - set the show as a Reminder

but do not auto-tune

W don't set this reminder - cancel the Reminder

60 Plasma TV

Operation

1. First, connect power cord correctly. At this moment, the TV switches to standby mode.

In standby mode to turn TV on, press the ,TV/VIDEO , CH (

D/E

) button on the TV or press

the POWER, TV/VIDEO, TV INPUT, CH (

D/E

), Number (0 ~ 9) button on the remote con-

trol.

Notes:

• If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

• After turning on the TV, it will take up to a week for the TV Guide On Screen system to receive full listings data.

• When the TV is turned on, blinks orange in standby mode, blinks green. And after orange stop

blinking, you can directly turn on the TV. But in case of green, screen is displayed in 3~4 seconds

later.

• If power isn’t turn on in red, contact your service center.

• When the power turns on, the screen of TV Guide is automatically showed. In case the prior condi-

tion turns on putting again after the power code puts out in conditon turning on power, the screen of

TV Guide is showed a little bit late.

2. Select the viewing source by using TV/VIDEO, TV INPUT button on the remote control.

This TV is programmed to remember which mode it was last set to, even if you turn the TV off.

3. When finished using the TV, press the POWER button on the remote control. The TV reverts to

standby mode.

Operation

TTurning the TV On

urning the TV On

* In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an

example to help you with the TV operation.

Owner’s Manual 61

Operation

- The menus can be shown on the screen in the selected language. First select your language.

1. Press the MENU button and then use

D/E

button to select the OPTION

menu.

2. Press the

GG button and then use

D/E

button to select Language.

3. Press the

G button and then use

D/E

button to select your desired language. From this point on, the on-screen menus will be shown in the selected language.

4. Press EXIT button to return to TV viewing or press MENU button to return to

the previous menu.

TV Setup

On-screen Menus Language Selection

62 Plasma TV

Operation

- Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.

- Run EZ Scan again after any Antenna/Cable connection changes.

- A password is required to gain access to EZ Scan menu if the Lock System is turned on.

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select EZ Scan.

3. Press the ENTER button to begin the channel search.

Allow EZ Scan to complete the channel search cycle for ANTENNA, and CABLE.

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select Manual Scan.

3. Press the

G button and then use

D / E

button to select TV, DTV, CATV, and

CADTV.

4. Press the

G button and then use

D / E

button to select channel number you

want to add or delete.

5. Press the ENTER button to add or delete for the channel number.

6. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Notes:

• This channel number is a physical channel number, which is different from the normal channel number shown in Channel

Edit.

• When a cable box connects to the physical channel 2,3 or 4 in the TV Guide On Screen system Setup, cable chan-

nels(CATV or CADTV) will not be scanned by EZ Scan or Manual Scan.

• When inserting the CableCARD

, CATV, CADTV is not working in Manual Scan.

• TV: analog antenna(over-the-air) TV signal

DTV: digital antenna(over-the-air) TV signal

CATV: analog cable TV signal

CADTV: digital cable TV signal

EZ Scan (Channel Search)

Setup Menu Options

Manual Scan

- A password is required to gain access to Manual Scan menu if the Lock System is turned on.

Owner’s Manual 63

Note:

• When a cable box connects to the physical channel 2, 3, or 4 in TV Guide On Screen Setup, cable channels(CATV or

CADTV) will not be editable by Channel Edit. Instead, use the cable box's Channel Edit if available.

Operation

- Create two different types of channel lists in memory: “Custom List” and “Favorite List” from the default channel list created from the EZ Scan channel search.

- A Custom List can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black color, and the channels deleted from the Custom List are displayed in gray color. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-left corner of the screen.You can create your own Favorite List. Use the FAV button on the remote control when a channel is highlighted and then you can add or delete the channel to/from the Favorite List.

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select Channel Edit.

3. Press the

G button. You will now see a screen filled with channel numbers and

a preview picture.

4. Use

D / E

/ F / G

button to select a channel and then use the ENTER button to

add or delete it. Press FAV button to add the channel to the Favorite List.

5. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Channel Edit

- Shows DTV signal levels which are received to your TV whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation.

- DTV Signal: Only when the input signal is DTV or CADTV, this function is available.

DTV Signal Strength

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select DTV Signal.

3. View the on-screen signal strength monitor to see the quality of the signal being

received.

5. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

64 Plasma TV

Operation

- Change the picture source so you can watch your TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select Main Input.

3. Press the

G button and then use

D / E

button to select the source: Antenna, Cable, Video, Front Video, Component1, Component2, RGB-DTV (or RGB-PC), HDMI1/DVI or HDMI2.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Note:

• To toggle RGB-DTV and RGB-PC, select RGB-DTV(or RGB-PC) and press

button.

Main Picture Source Selection

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select Input Label.

3. Press the

G button and then use

D / E

button to select the source: Video, Front

Video, Component1, Component2, RGB, HDMI1/DVI or HDMI2.

4. Press the

F / G button to select the label.

5. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Input Label

- Choose preset labels for your channels.

- If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel even if you didn't preset a label for the channel.

1. Press the MENU button and then use

D / E

button to select the SETUP menu.

2. Press the

G button and then use

D / E

button to select Channel Label.

3. Press the

G button. You will now see a screen filled with Labels and a preview screen.

4. Use the CH

D/E

button to select a channel to Label.

5. Use

D / E

/ F / G

button to select the appropriate label for the channel, then press ENTER button to set the Label to

the selected channel.

- If you press ENTER button in TV viewing mode, you will see the channel banner. • For example:

Channel Label Setup

DTV 2-0

CNN

DOLBY DIGITAL

- Sets a label to each input source or lets you skip the input source which is not

in use when you press TV/VIDEO button.

Setup Menu Options

Owner’s Manual 65

- Use to quickly reset all the Video menu options to their original factory preset values.

1. Press the MENU button and then use

D / E

button to select the VIDEO menu.

2. Press the

G button and then use

D / E

button to select Video Reset .

3. Press the

G button to reset the Video menu options to original values.

VVideo Reset

ideo Reset

Operation

- Adjust the picture appearance to suit your preference and viewing situations.

1. Press the MENU button and then use

D / E

button to select the VIDEO menu.

2. Press the

G button and then use

D / E

button to select the desired picture option

(

Contrast, Brightness, Color, Sharpness, or Tint ).

3. Press the

G button and then use F / G button to make appropriate adjustments.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

1. Press the EZ PIC button repeatedly to select the picture appearance setup option as shown below:

Custom (your own settings), Daylight, Normal, Night Time, Movie, Video Game, and Sports.

• You can also use the

VIDEO menu to adjust EZ Picture.

2. Press the EXIT button to save and return to TV viewing or press MENU button to return to the previous menu.

EZ Picture

Manual Picture Control (

Manual Picture Control (Custom

option)

- Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue.

1. Press the MENU button and then use

D / E

button to select the VIDEO menu.

2. Press the

G button and then use

D / E

button to select Color Temperature .

3. Press the

G button and then use

D / E

button to select either Cool, Medium or

Warm.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Color

ColorTT

emperature Control

- EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category.

- When adjusting Video menu options (contrast, brightness, color, sharpness, tint, and color temperature) manually, EZ Picture automatically changes to Custom.

Daylight, Normal, Night Time, Movie, Video Game, and Sports settings are preset for optimum picture quality at

the factory and are not adjustable.

VVideo Menu Options

ideo Menu Options

66 Plasma TV

Operation

- Other languages may be available if a digital signal is provided by the broadcasting station.

1. Press the EZ SOUND button repeatedly to select the appropriate sound setup as shown below:

Custom (your own settings), Normal, Stadium, News, Music, and Theater.

• You can also adjust

EZ Sound in the AUDIO menu.

2. Press EXIT button to save and return to TV viewing or press MENU button to return to the previous

menu.

EZ Sound

1. Press the MENU button and then use

D / E

button to select the AUDIO menu.

2. Press the

G button and then use

D / E

button to select the desired sound option

(

Balance, Treble, or Bass).

3. Press the

G button and then use F / G button to make appropriate adjustments.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Manual Sound Control (

Manual Sound Control (Custom

option)

1. Press the MENU button and then use

D / E

button to select the AUDIO menu.

2. Press the

G button and then use

D / E

button to select Audio Language.

3. Press the

G button and then use

D / E

button to select: English, Spanish, or

French.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

- EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content.

- When adjusting sound options (treble, bass, and front surround) manually, EZ Sound automatically switches to

Custom.

Normal, Stadium, News, Music, and Theater are preset for good sound quality at the factory and are not adjustable.

- Scans for changes in sound level during commercials, then adjusts the sound to match the specified audio level. EZ SoundRite makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program.

1. Press the MENU button and then use

D / E

button to select the AUDIO menu.

2. Press the

G button and then use

D / E

button to select EZ SoundRite.

3. Press the

G button and then use

D / E

button to select On or Off.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

EZ SoundRite

- Adjust the sound to suit your taste and room situations.

Audio Language

Audio Menu Options

Owner’s Manual 67

1. Press the MENU button and then use

D / E

button to select the AUDIO menu.

2. Press the

G button and then use

D / E

button to select TV Speaker.

3. Press the

G button and then use

D / E

button to select On or Off.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

TV Speakers On/Of

f Setup

- Turn TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off.

Operation

1. Press the MENU button and then use

D / E

button to select the AUDIO menu.

2. Press the

G button and then use

D / E

button to select Front Surround.

3. Press the

G button and then use

D / E

button to select Off, 3D EchoSound

System

or SRS (Sound Retrieval System) TruSurround XT..

•

3D EchoSound System

Creates a stunning simulated stereo effects from any mono sound and a realistic three-dimensional sound with a very wide and deep sound stage into stereo sound.

• SRS TruSurround XT

Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement that produces an immersive sound experience from standard stereo material.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Front Surround

- is a trademark of SRS Labs, Inc.

- TruSurround XT technology is incorporated under license from SRS Labs, Inc.

- Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

68 Plasma TV

Operation

1. Use the SAP button to select your desired MTS mode in analog signal. Each time you press the SAP button, Mono,

Stereo, or SAP appear in turn.

• If other languages are available on the digital signal, select them with the SAP button.

2. Press EXIT button to save and return to TV viewing.

Stereo/SAP

Broadcasts Setup

- This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the original one.

- When having selected Stereo or SAP button on the remote control, this TV can only receive the signal in case that the TV station transmits the proper signals.

- Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.

- Select Mono if you want to listen to the mono sound in remote fringe areas during stereo/SAP broadcasting.

- Stereo or SAP can be received in Analog channel.

1. Press the MENU button and then use

D / E

button to select the AUDIO menu.

2. Press the

G button and then use

D / E

button to select BBE.

3. Press the

G button and then use

D / E

button to select On or Off.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

BBE

- BBE High Definition Sound restores clarity and presence for better speech intelligibility and music realism.

• Manufactured under license from BBE Sound, Inc.

• Treble, Bass or BBE aren’t suitable for

SRS TSXT mode.

Audio Menu Options

Owner’s Manual 69

Operation

- Timer function operates only if current time has been set.

- Off-Timer function overrides On-Timer function if they are both set to the same time.

- The TV must be in standby mode for the On-Timer to work.

- If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to standby mode.

On/Of

On/OfffTT

imer Setup

1. Press the MENU button and then use

D / E

button to select the TIME menu.

2. Press the

G button and then use

D / E

button to select Off Timer or On Timer.

3. Press the G button and then use

D / E

button to select On.

• To cancel

On/Off timer function, select Off.

4. Press the

G button and then use

D / E

button to set the hour.

5. Press the

G button and then use

D / E

button to set the minutes.

6. For only

On timer function

Press the

button and then use

D / E

button to select the channel at turn-on.

Press the

G button and then use

D / E

button to set the sound level at turn-on.

7. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

- The time is set automatically from a digital channel signal.

- The digital channel signal includes information for the current time provided by the broadcasting station.

- Set the clock manually, if the current time is set incorrectly by the auto clock function.

- When you set up TV Guide On Screen System,

Auto Clock menu is not selected.

1. Press the MENU button and then use

D / E

button to select the TIME menu.

2. Press the

G button and then use

D / E

button to select Auto Clock.

3. Press the

G button and then use

D / E

button to select On or Off.

4. Press the

G button and then use

D / E

button to select your viewing area time

zone:

Eastern, Central, Mountain, Pacific, Alaska, or Hawaii.

5. Press EXIT button to return to TV viewing or press MENU button to return to

the previous menu.

- If current time setting is wrong, reset the clock manually.

- When you set up TV guide on screen system,

Manual Clock menu is not

worked.

1. Press the MENU button and then use

D / E

button to select the TIME menu.

2. Press the

G button and then use

D / E

button to select Manual Clock.

3. Press the

G button and then use F / G button to select either the year, date, or

time option. Once selected, use the

D / E

button to set the year, date, and time

options.

4. Press EXIT button to return to TV viewing or press MENU button to return to

the previous menu.

Auto Clock Setup

Manual Clock Setup

TTime Menu Options

ime Menu Options

70 Plasma TV

Operation

Auto Of

Auto Offf

- If set to on and there is no input signal, the TV turns off automatically after 10 minutes.

1. Press the MENU button and then use

D / E

button to select the TIME menu.

2. Press the

G button and then use

D / E

button to select Auto Off.

3. Press the

G button and then use

D / E

button to select On or Off.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Sleep

SleepTT

imer

- The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off.

- You can also set up the Sleep Timer in the TIME menu.

1. Press the TIMER button repeatedly to select the number of minutes. First the

Off option appears on the screen,

followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes.

2. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to

count down from the number of minutes selected.

3. To check the remaining minutes before the TV turns off, press the TIMER button once.

4. To cancel the Sleep Timer, press the TIMER button repeatedly to select

Off.

TTime Menu Options

ime Menu Options

Owner’s Manual 71

Operation

- Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed.

- If you are viewing a picture with a 16:9 aspect ratio, you can’t use the Horizon aspect ratio option.

- Horizon aspect ratio is not available for Component1-2(720p/1080i)/RGB-DTV(720p/1080i)/ HDMI1/DVI-DTV (720p/1080i)/DTV(720p/1080i), HDMI2 input source.

- In RGB-PC/DVI-PC input source, only use 4:3 or 16:9 aspect ratio are available.

- Note: If a fixed image is displayed on the screen for a long time, it image may become imprinted on the screen and remain visi-

ble.

•

Set By Program

Select the proper picture proportion to match the source’s image. (4:3 → 4:3, 16:9 → 16:9)

•

4:3

Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides.

•

16:9

Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.

•

Horizon

Choose Horizon when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create a spectacular view.

•

Zoom 1

Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.

•

Zoom 2

Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage.

•

Cinema Zoom

Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture, the image may become distorted.

You can adjust the enlarge proportion of Cinema Zoom using

D / E

button. The adjustment range is 1~16.

1. Press the RATIO button repeatedly to select the desired picture format.

You can also adjust

Aspect Ratio in the OPTION menu.

Cinema 3:2 Mode Setup

- Most movies are 24 frames/sec, but TV signal is 30 frames/sec.

This option lets the TV do 3:2 pull-down operation for you to watch movies at the best motion appearance.

1. Press the MENU button and then use

D / E

button to select the OPTION menu.

2. Press the

G button and then use

D / E

button to select Cinema 3:2 Mode.

3. Press the

button and then use

D / E

button to select On or Off.

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.

Option Menu Features

Aspect Ratio Control

+ 37 hidden pages