EXTERNAL EQUIPMENT SETUP
HDMI/DVI IN
ANTENNA/
CABLE IN
REMOTE
CONTROL IN
RS-232C IN
(CONTROL & SERVICE)
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT
OPTICAL
1
2
VIDEO
S-VIDEO
L R
S-VIDEO VIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
VIDEO
AUDIO
( )
VCR SETUP
■
To avoid picture noise (interference), leave an adequate distance between the VCR and TV
■
Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period
of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on
the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty
does not cover the product bearing this phenomenon.
When connecting with an antenna
EXTERNAL EQUIPMENT SETUP
1
Wall Jack
Antenna
1. How to connect
Connect the RF antenna out socket of the VCR to the
1
Connect the antenna cable to the RF antenna in socket of the VCR.
2
2. How to use
■
Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
■
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.
2
AAnntteennnnaa
socket on the set.
)
20
When connecting with a RCA cable
!
DIGITAL AUDIO
OUT
OPTICAL
COMPONENT IN
AV OUT
AV IN 1
S-VIDEO
VIDEO
AUDIO
VIDEO
AUDIO
MONO
( )
L R
S-VIDEO VIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
VIDEO
AUDIO
( )
L R
S-VIDEO VIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
DIGITAL AUDIO
OUT
OPTICAL
COMPONENT IN
AV OUT
VIDEO
AUDIO
AV IN 1
VIDEO
S-VIDEO
AUDIO
MONO
( )
!
1. How to connect
AAUUDDIIOO/VVIIDDEEOO
jacks between TV and
Connect the
1
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)
2. How to use
■
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.
■
Select
AAVV 11
input source with using the
)
IINNPP UU TT
button on
the remote control.
■
If connected to
AAVV IINN22
, select
AAVV 22
input source.
When connecting with an S-Video cable
1. How to connect
1
NOTE
If you have a mono VCR, con-
GG
nect the audio cable from the
VCR to the
LL // MMOO NNOO
AAUUDDIIOO
jack of the set.
EXTERNAL EQUIPMENT SETUP
1
2
2. How to use
■
Insert a video tape into the VCR and press PLAY on the VCR.
(
Refer to the VCR owner’s manual.
■
Select
the remote control.
■
If connected to
NOTE
The picture quality is improved: compared to normal
GG
composite (RCA cable) input.
Connect the S-VIDEO output of the VCR to the
SS --VV IIDDEEOO
Connect the audio outputs of the VCR to the
input on the set.
AAUUDDIIOO
input jacks on the set.
)
AAVV 11
input source with using the
AAVV IINN22
, select
AAVV 22
IINNPP UU TT
button on
input source.
1
2
CAUTION
Do not connect to both Video
GG
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
only the S-Video will work.
21
EXTERNAL EQUIPMENT SETUP
AV IN 2
L/ MONO
R
AUDIO
VIDEO
S-VIDEO
L R
VIDEO
!
OTHER A/V SOURCE SETUP
Camcorder
EXTERNAL EQUIPMENT SETUP
1. How to connect
Connect the
1
between TV and external equipment.
Match the jack colors
(
Video = yellow, Audio Left = white, and
Audio Right = red
AAUUDDIIOO/VVIIDDEEOO
.
)
2. How to use
■
■
■
AAVV 22
Select
IINNPP UU TT
If connected to
input source with using the
button on the remote control.
AAVV IINN11
input, select
input source.
Operate the corresponding external equipment.
jacks
AAVV 11
Video Game Set
1
NOTE
This TV finds the connected input sources automati-
GG
cally for AV1, AV2, Component 1-2, RGB,
HDMI1/DVI and HDMI2 sources are connected.
22
PC SETUP
!
RGB OUTPUTAUDIO
REMOTE
CONTROL IN
RS-232C IN
(CONTROL & SERVICE)
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT
OPTICAL
1
2
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting D-sub 15pin cable
1. How to connect
Connect the RGB output of the PC to the
1
((
))
PPCC
jack on the set.
Connect the PC audio output to the
2
((
RRGGBB //DDVVII
))
jack on the set.
RRGGBB IINN
AAUUDDIIOO II NN
EXTERNAL EQUIPMENT SETUP
2
1
2. How to use
■
Turn on the PC and the set.
■
Check the image on your TV. There may be noise associ-
GG
ated with the resolution, vertical pattern, contrast or
brightness in PC mode. If noise is present, change the PC
output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the
VIDEO menu until the picture is clear. If the refresh rate
of the PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of the PC
graphic card.
RRGGBB -- PP CC
Select
SETUP menu.
NOTE
input source in main input option of
pp..6677
))
((
GG
23
EXTERNAL EQUIPMENT SETUP
ANTENNA/
CABLE IN
REMOTE
CONTROL
RS-232C IN
(CONTROL & SERVICE
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
SERVICE
HDMI/DVI IN
1
2
DVI-PC OUTPUT AUDIO
!
When connecting HDMI to DVI cable
1. How to connect
EXTERNAL EQUIPMENT SETUP
Connect the DVI output of the PC to the
1
IINN 11
22
or
jack on the set.
Connect the PC audio output to the
2
((
RRGGBB //DDVVII
))
jack on the set.
2. How to use
■
Turn on the PC and the set
■
If the PC has a DVI output and no HDMI output, a sepa-
GG
rated audio connection is necessary.
If the PC does not support Auto DVI, you need to set the
GG
output resolution appropriately. To get the best picture
quality, adjust the output resolution of PC graphics card's
output resolution to 1024x768, 60Hz.
Select
IINNPP UU TT
the
NOTE
HHDDMMII11 // DDVV II
HHDDMMII22
or
button on the remote control.
input source with using
HHDDMMII//DDVVII
AAUUDDIIOO IINN
1
2
24
NOTES
!
To get the the best picture quality, adjust the PC
GG
graphics card to 1024x768, 60Hz.
Depending on the graphics card, DOS mode may
GG
not work if a HDMI to DVI Cable is in use.
When Source Devices are connected with
GG
HDMI/DVI Input, the output PC Resolution (VGA,
SVGA, XGA, WXGA), Position and Size may not fit
on the Screen. Press the ADJUST button to adjust
the screen Position of the TV SET and contact a
PC graphics card service center.
When Source Devices connected with HDMI/DVI
GG
Input, output TV SET Resolution (480p, 720p,
1080i, 1080p) and TV SET Display fit EIA/CEA861-B Specification to Screen. If not, refer to the
Supported Display Specifications
RGB-PC, HDMI1/DVI-PC mode
Resolution
Horizontal Vertical
Frequency(KHz)Frequency(Hz
)
Manual of HDMI/DVI Source Devices or contact
your service center.
GG
If the HDMI/DVI Source Device is not connected
to the Cable or if there is a poor cable connection, "No signal" is displayed in the HDMI/DVI
Input. In this case, that Video Resolution is not
supported. If "Invalid Format" is displayed, refer to
the Source Device manual or contact your service
center.
Avoid keeping a fixed image on the screen for a
GG
long period of time. The fixed image may become
permanently imprinted on the screen.
The synchronization input form for Horizontal
GG
and Vertical frequencies is separate.
HDMI1/DVI-DTV,
Resolution
HDMI2-DTV mode
Horizontal Vertical
Frequency(KHz)Frequency(Hz
EXTERNAL EQUIPMENT SETUP
)
640x350
720x400
640x480
800x600
1024x768
1280x768
1360x768
1366x768
31.469 70.08
31.469 70.08
31.469 59.94
37.879 60.31
48.363 60.00
47.776 59.87
47.720 59.799
47.130 59.65
* RGB-PC mode only: 640x350, 720X400
720x480
1280x720
1920x1080i
1920x1080p
31.469 59.94
31.500 60.00
44.960 59.94
45.000 60.00
33.720 59.94
33.750 60.00
27.000 24.00
33.750 30.00
25
EXTERNAL EQUIPMENT SETUP
ADJUST
SAP
SOUND
PICTURE
CC
Screen Setup for PC mode
Overview
When RGB connect to PC output and select the RGB-PC in Input
source, this function is used.
When HDM/DVI connect to PC output and select HDMI/DVI input,
this function is used.
After connecting RGB-PC or HDMI/DVI to PC input and checking the
EXTERNAL EQUIPMENT SETUP
screen quality.
When you change the resolution, select the proper resolution in pre-
sent input to see the best picture appearance.
Adjustment for screen Resolution, Position, Size,
and Phase
Press the
1
select
Press the
2
make appropriate adjustments.
■
The
In HDMI/DVI-PC mode,
■
The
In HDMI/DVI-PC mode,
Press the
3
AADDJJUUSS TT
button and then use
RRee ss ooll uutt iioonn, PPoossiittii oonn, SSiizz ee
EENNTTEERR
PPhhaassee
SSiizzee
EENNTTEERR
button and then use
adjustment range is
PPhhaassee
adjustment range is
SSiizzee
button.
--1166 ~++1166
is not available.
--3300 ~++3300
is not available.
DD
PPhhaass ee
, or
DD EE FF GG
.
or EEbutton to
.
button to
.
Initializing (Reset to original factory values)
RReessoolluuttiioonn
PPoossiittiioonn
SSiizzee
PPhhaassee
1024 x 768
1280 x 768
1360 x 768
1366 x 768
Close
1 2 3
This function allows you select
resolution of XGA/WXGA.
This function is to adjust picture to
left/right and up/down as you prefer.
This function is to minimize any vertical bars or stripes visible on the
screen background. And the horizontal screen size will also change.
This function allows you to
remove any horizontal noise and
clear or sharpen the image of characters.
26
To initialize the adjusted values
2
select
Press the
Press the
1
select
Press the
3
AADDJJUUSS TT
RRee sseett
EENNTTEERR
YYee ss
.
EENNTTEERR
button and then use
.
button and then use
button.
or EEbutton to
DD
FF
GG
or
button to
Close
1 2 3
AV OUT SETUP
L R
S-VIDEOVIDEO
ICAL
NT IN
AV OUT
AV IN 1
VIDEO
AUDIO
MONO
( )
S-VIDEO
!
REMOTE
CONTROL IN
RS-232C IN
(CONTROL & SERVICE)
(PC)
AUDIO IN
(RGB/DVI)
VIDEO
S-VIDEO
DIGITAL AUDIO
OUT
OPTICAL
!
The TV has a special signal output capability which allows you to hook up the second TV or monitor.
1. How to connect
Connect the second TV or monitor to the TV’s
1
jacks.
AAVV OOUUTT
See the Operating Manual of the second TV or monitor
2
for further details regarding that device’s input settings.
NOTE
Component1-2, RGB-PC, HDMI1/DVI, HDMI2, DTV input
GG
sources cannot be used for AV out.
We recommend to use the AV OUT jacks for VCR recording.
GG
DIGITAL AUDIO OUTPUT
Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical)port.
1. How to connect
Connect one end of an optical cable to the TV Digital
1
Audio (Optical)Output port.
EXTERNAL EQUIPMENT SETUP
1
2
3
GG
GG
Connect the other end of the optical cable to the
digital audio (optical)input on the audio equipment.
Set the “TV Speaker option - Off ” in the AUDIO
pp.. 8844
menu. (
GG
). See the external audio equipment
instruction manual for operation.
NOTE
When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. (
GG
pp..8844
)
CAUTION
Do not look into the optical output port. Looking at the
laser beam may damage your vision.
1
2
27
WATCHING TV / CHANNEL CONTROL
1 2 3
4 5 6
7809
BACK
VOL CH
MUTE
FAV
BRIGHT -
MENU
BRIGHT +
ENTER
EXIT
TIMER
RATIO
SIMPLINK
POWER
VCR
TV
DVD
AUDIO
CABLE
STB
MODE
TV INPUT
INPUT
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
WATCHING TV / CHANNEL CONTROL
control buttons
MODE
VCR/DVD
MENU
BRIGHT -/ +
THUMBSTICK
(Up/Down/Left
Right/ENTER)
EXIT
TIMER
RATIO
Select the remote operating mode: TV, DVD, VCR,
AUDIO, CABLE or STB.
Control video cassette recorders or DVD players.
Displays the main menu.
Adjust the brightness on screen.
It turns to the default settings brightness by changing
mode source.
Navigate the on-screen menus and adjust the system settings to your preference.
Clear all on-screen displays and return to TV viewing
from any menu.
Select the amount of time before your TV turns off automatically.
Change the aspect ratio.
GG
pp..9900
pp..9922--9933
GG
VOLUME UP
UP/DOWN
NUMBER button
— (DASH)
SIMPLINK
/DOWN
MUTE
FAV
CHANNEL
BACK
LIGHT
pp..9922--9933
C?
GG
Increase/decrease the sound level.
Switch the sound on or off.
GG
pp..3388
Scroll through the programmed Favorite channels.
Select available channels.
Used to enter a program number for multiple program
channels such as 2-1, 2-2, etc.
Tune to the last channel viewed.
Illuminates the remote control
buttons of selected mode.
28
POWER
BRIGH
T -
MENU
B
R
IG
H
T
+
POWER
V
C
R
T
V
DVD
A
U
D
I
O
CABLE
S
T
B
MODE
TV INPUT
INPUT
R
BRIGH
T -
MENU
B
R
IG
H
T
+
POWER
V
C
R
T
V
DVD
A
U
D
I
O
CABLE
S
TB
MODE
TV INPUT
INPUT
Turns your TV or any other programmed equipment on or off, depending on the mode.
TV INPUT
In AV 1-2, Component 1-2, RGB-PC (or RGB-DTV), HDMI1/DVI, and HDMI2 input sources,
screen returns to the last TV channel.
INPUT
External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGBPC (or RGB-DTV), HDMI1/DVI and HDMI2.
(AV 1-2, Component 1-2, RGB-PC (or RGB-DTV), HDMI1/DVI, and HDMI2 input sources are
linked automatically, only if these are connected.)
Inside the Sliding Cover
1 2 3
4 5 6
7809
BACK
PICTURE
ADJUST
SOUND
SAP
CC
PICTURE
SOUND
SAP
CC
ADJUST
Adjust the factory preset picture depend on
the viewing environment.
GG
pp ..6699
Select the appropriate type of sound for type
of program.
GG
pp ..8800
Analog mode: Selects MTS sound (Mono,
Stereo, and a SAP)
DTV mode: Change the audio language.
Select a closed caption.
(*In DTV/CADTV mode
GG
GG
pp ..9944
pp ..9955
)
Adjust the screen position, size and phase in
PC mode.
pp ..
GG
WATCHING TV / CHANNEL CONTROL
Installing Batteries
■
Open the battery compartment cover on the back
side and install the batteries matching correct
polarity (+with +,-with -).
■
Install two 1.5V AA batteries. Don’t mix old or
used batteries with new ones.
■
Close cover.
Remote control effective range
■
Use a remote control up to 7 meters distance
and 30 degree (left/right) within the receiving
unit scope.
■
Dispose of used batteries in a recycle bin to
preserve environment.
29
WATCHING TV / CHANNEL CONTROL
!
POWER
VCR
TV
DVD
TV INPUT
INPUT
SAP
SOUND
PICTURE
CC
123
456
7809
BACK
VOL CH
MUTE
FAV
EXIT
TIMER
RATIO
SIMPLINK
SAP
SOUND
PICTURE
CC
123
456
7809
BACK
VOL CH
MUTE
FAV
EXIT
TIMER
RATIO
SIMPLINK
123
456
VOL CH
MUTE
FAV
EXIT
TIMER
RATIO
SIMPLINK
TURNING ON TV
First, connect power cord correctly.
1
At this moment, the TV switches to standby mode.
■
In standby mode to turn TV on, press the ,
button on the TV or press the
)), NNuummbbeerr ((00~99))
EE
button on the remote control.
PPOOWWEERR, IINNPPUUTT, TTVV IINNPPUUTT, CCHH((
IINNPPUUTT,CCHH ((
DD
or
DD
))
EE
or
WATCHING TV / CHANNEL CONTROL
Select the viewing source by using the
2
remote control.
■
This TV is programmed to remember which power state it was last set
TTVV IINNPPUUTT, IINNPPUUTT
button on the
to, even if the power cord is out.
When finished using the TV, press the
3
control. The TV reverts to standby mode.
PPOOWWEERR
button on the remote
NOTE
GG
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
GG
When the TV is turned on, the indicator will blink green before the picture is seen.
CHANNEL SELECTION
1
Press the
CCHH
DD EE
NNUUMMBBEERR
or
buttons to select a channel number.
30
VOLUME ADJUSTMENT
Adjust the volume to suit your personal preference.
VVOOLL
DD
or
button to adjust the volume.
EE
Press the
1
If you want to switch the sound off, press the
2
You can cancel the Mute function by pressing the
3
button.
MMUUTTEE
MMUUTTEE
button.
or
VVOOLL
DD
or
EE
ON-SCREEN MENUS SELECTION
Your TV's OSD (On Screen Display)may differ slightly from what is shown in this manual.
1
2
Press the
Press the
SETUP
LOCK
MMEENNUU
GG
button and then use
button and then use
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
For USA
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Input Block
or
DD
DD EE FF GG
For Canada
Lock System
Set Password
Block Channel
TV Rating-English
TV Rating-French
Input Block
button to select the each menu.
EE
button to display the available menus.
VIDEO
AUDIO
WATCHING TV / CHANNEL CONTROL
EZ Picture
Color Temperature
XD
Advanced
Video Reset
Audio Language
EZ Sound
Balance
TV Speaker
OPTION
Aspect Ratio
Caption/Text
Caption Option
Language
ISM Method
Low Power
TIME
Auto Clock
Manual Clock
Off Timer
On Timer
Sleep Timer
Auto Off
31
WATCHING TV / CHANNEL CONTROL
BRIGHT -
BRIGHT +
ENTER
TIMER
RATIO
SIMPLINK
POWER
VCR
TV
DVD
AUDIO
CABLE
STB
MODE
TV INPUT
INPUT
EXIT
MENU
WATCHING TV / CHANNEL CONTROL
AUTO SCAN (EZ SCAN
)
Automatically finds all channels available through antenna
or cable inputs, and stores them in memory on the channel
list.
Run EZ Scan again after any Antenna/Cable connection
changes.
A password is required to gain access to EZ Scan menu if
the Lock System is turned on.
1
2
Press the
to select the
Press the
select
MMEE NNUU
button and then use
SSEETTUUPP
button and then use
GG
EEZZ SSccaann
.
menu.
DD
or
or
DD
button to
EE
EE
button
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
3
Press the
EEZZ SSccaann
Allow
AANNTT EENNNNAA
for
EENNTT EERR
button to begin the channel search.
to complete the channel search cycle
CCAABB LL EE
and
.
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
Selection (Gor )
G
leads you to the EZ
scan screen.
Selection (Gor )
G
leads you to the EZ
scan screen.
1
2
Processing EZ scan...
ANTENNA Ch.20
0 channel(s) found
Press to stop the
current scan and start
DIGITAL ANTENNA channel
scan.
MENU Previous
Next
3
32
ADD/DELETE CHANNEL (MANUAL SCAN
BRIGHT -
BRIGHT +
ENTER
TIMER
RATIO
SIMPLINK
POWER
VCR
TV
DVD
AUDIO
CABLE
STB
MODE
TV INPUT
INPUT
EXIT
MENU
A password is required to gain access to Manual Scan
menu if the Lock System is turned on.
1
2
Press the
MMEENNUU
to select the
Press the
select
GG
MMaannuuaall SSccaann
button and then use
SSEETTUUPP
menu.
button and then use
.
DD
or
DD
or
EE
button
EE
button to
)
WATCHING TV / CHANNEL CONTROL
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
Press the
3
select
Press the
4
select channel you want to add or delete.
Press the
5
Press the
6
MMEENNUU
button and then use
GG
TT VV, DDTTVV, CCAA TT VV
button and then use
GG
EENNTTEERR
EEXXIITT
button to return to TV viewing or press
, and
button to add or delete the channel.
button to return to the previous menu.
DD
CCAADDTTVV
DD
or
.
or
button to
EE
button to
EE
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
Select channel type and
G
RF-channel number.
TV 2
Select channel type and
RF-channel number.
DD
TV
EE
TV 2-0
Press
to delete the channel.
1
2
2
GG
3 4 5
33
WATCHING TV / CHANNEL CONTROL
BRIGHT -
BRIGHT +
ENTER
TIMER
RATIO
SIMPLINK
POWER
VCR
TV
DVD
AUDIO
CABLE
STB
MODE
TV INPUT
INPUT
EXIT
MENU
CHANNEL EDITING
There are two different ways in order to add or delete
scanned channels. One is "Custom List" and the other is
"Favorite List" in the channel list. Both of them are available
after EZ Scan on the SETUP menu.
A Custom List can be created by toggling each channel on
or off with ENTER button. The channels in the Custom List
are displayed in black color, and the channels deleted from
the Custom List are displayed in gray color. Once a channel
is highlighted you can add or delete the channel by referring
to the small window at the top-left corner of the screen.
DD
or
FFAAVV
EE
button
button
WATCHING TV / CHANNEL CONTROL
You can create your own Favorite List. Use the
on the remote control when a channel is highlighted and
then add or delete the channel to/from your Favorite List.
1
Press the
to select the
MMEENNUU
SSEETTUUPP
button and then use
menu.
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
Press the
2
select
Press the
3
with channel numbers and a preview picture.
Use
4
DD EE FF GG
use the
Press
button and then use
GG
CChhaa nn nn eell EEdd iitt
button. You will now see a screen filled
GG
.
button to select a channel and then
EENNTTEERR
FFAAVV
button to add or delete it.
button to add the channel to the Favorite List.
DD
or
The heart-mark will appear in front of that channel
number.
EEXX II TT
5
Press
MMEE NNUU
button to return to TV viewing or press
button to return to the previous menu.
button to
EE
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
Selection ( Gor ) leads
G
you to the channel edit
screen.
1
2
3 4
34
DTV SIGNAL STRENGTH
BRIGHT -
BRIGHT +
ENTER
TIMER
RATIO
SIMPLINK
POWER
VCR
TV
DVD
AUDIO
CABLE
STB
MODE
TV INPUT
INPUT
EXIT
MENU
This feature displays the DTV signal levels being received
and indicates whether you need to adjust your antenna or
digital cable input. The higher the signal strength, the less
likely you are to experience picture degradation.
DTV Signal: This function is only available when the input
signal is DTV or CADTV.
1
2
Press the
MMEE NNUU
to select the
Press the
select
GG
DD TTVV SSii ggnnaall ..
button and then use
SSEETTUUPP
menu.
button and then use
DD
DD
or
or
EE
button to
EE
button
WATCHING TV / CHANNEL CONTROL
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
View the on-screen signal strength monitor to see
3
the quality of the signal being received.
EEXXIITT
4
Press
MM EENNUU
button to return to TV viewing or press
button to return to the previous menu.
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
1
Bad Normal Good
2 3
35
WATCHING TV / CHANNEL CONTROL
BRIGHT -
BRIGHT +
ENTER
TIMER
RATIO
SIMPLINK
POWER
VCR
TV
DVD
AUDIO
CABLE
STB
MODE
TV INPUT
INPUT
EXIT
MENU
INPUT SOURCE SELECTION
Changes the picture source so you can watch your off-air
TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.
WATCHING TV / CHANNEL CONTROL
Press the
1
to select the
Press the
2
select
Press the
3
select the source:
MMEE NNUU
button and then use
SSEETTUUPP
button and then use
GG
IInnppuutt SS oouurrccee..
button and then use
GG
TT VV, AAVV 11, AAVV 22, CCoo mmppoo nneenntt 11
menu.
CCoo mmppoo nneenntt 22, RRGGBB--PPCC, HHDDMMII11 //DDVVII
EEXX II TT
4
Press
MMEE NNUU
button to return to TV viewing or press
button to return to the previous menu.
DD
DD
DD
or
or
or
EE
button to
EE
button to
EE
, or
button
HHDDMMII22
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
1
G
TV
AV1
AV2
Component1
Component2
RGB-PC
HDMI1/DVI
HDMI2
2 3
,
.
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
36
INPUT LABEL
BRIGHT -
BRIGHT +
ENTER
TIMER
RATIO
SIMPLINK
POWER
VCR
TV
DVD
AUDIO
CABLE
STB
MODE
TV INPUT
INPUT
EXIT
MENU
Sets a label to each input source which is not in use when
you press the INPUT button.
1
2
Press the
to select the
Press the
select
MMEE NNUU
button and then use
SSEETTUUPP
button and then use
GG
IInnppuutt LLaabbeell
menu.
.
DD
or
or
DD
button to
EE
EE
button
WATCHING TV / CHANNEL CONTROL
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
Press the
3
select the source:
button and then use
GG
AAVV 11, AAVV 22,CCoo mmppoo nneenntt 11
CCoo mmppoo nneenntt 22, RRGGBB--PPCC, HHDDMMII11 //DDVVII
or
4
5
Press the
EEXX II TT
Press
MMEE NNUU
FF
button to return to the previous menu.
button to select the label.
GG
button to return to TV viewing or press
DD
or
button to
EE
or
,
HHDDMMII22
1
.
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
AV1 Cable Box
AV2 VCR
Component1 DVD
Component2 Set Top Box
RGB-PC PC
HDMI1/DVI Game
G
HDMI2 Satellite
3 42
37
WATCHING TV / CHANNEL CONTROL
123
456
VOL CH
MUTE
FAV
BRIGHT -
MENU
BRIGHT +
ENTER
EXIT
TIMER
RATIO
SIMPLINK
!
This Enables you to control and play other AV devices connected to TV through HDMI cable without additional cables
and settings.
In order to control AV devices connected to TV without
Simplink, user had to switch the input mode of TV and use
additional remote control bundled to the AV devices.
Simplink provides an easy solution to control all connected
devices with one remote control.
WATCHING TV / CHANNEL CONTROL
1
2
Press the
to select the
Press the
select
MMEE NNUU
button and then use
OOPPTTIIOONN
button and then use
GG
SSiimmppLLiinnkk
.
menu.
or
DD
EE
or EEbutton to
DD
button
Aspect Ratio
Caption/Text
Caption Option
Language
ISM Method
Low Power
SimpLink
3
4
Press the
OOnn
select
EEXXIITT
Press
MMEENNUU
button to return to the previous menu.
button and then use
GG
OOffff
or
.
button to return to TV viewing or press
or EEbutton to
DD
NOTE
While Auto Tuning is proceeding, Simplink does not
GG
work.
Except Auto Tuning, Simplink stops the current activity
GG
or clears Display OSD on the screen. After Simplink
workes, only Info. OSD resumes the display.
While Menu, XSTUDIO is proceeding, Simplink does
GG
not work.
Aspect Ratio
Caption/Text
Caption Option
Language
ISM Method
Low Power
SimpLink
1
Off
G
On
2 3 4
38
Simplink Functions
■
RR eeccoorrddiinn gg// DD iisscc ppll aayybb aacckk ::
Control connected AV devices by pressing the
DD EE
FF GG
,
buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip.
■
DDii rreecctt PPll aa yy ::
After connecting AV devices to TV, you can directly control the devices and play
media without additional settings.
■
SSee lleecctt AAVV dd eevvii cc ee ::
■
PPooww eerr ooffff aallll ddee vv iicceess ::
■
SSww iittcchh aauuddiioo--oouutt ::
Enables you to select one of AV devices connected to TV and play it.
When you power off TV, all connected devices are turned off.
Offers an easy way to switch audio-out.
(A device, which is connected to TV through HDMI cable but does not support Simplink, does
not provide this function)
AV devices supporting SimpLink
■
DDVVDD PP llaa yy eerr HH//TT
■
HHDDDD eemm bbeeddddee dd DDVVDD RReecc oorrddeerr ((RRHH))
■
DDVVDD RReeccoo rr ddee rr CC oomm bboo ((RR --CC oomm bbii))
■
DDVVDD PP llaa yy eerr
: DVD player embeddedH/T device.
: DVD recorder with HDD.
: DVD Recorder integrating VCR.
: Pre-recorded discs playback only.
SimpLink Menu
EENNTTEERR
WATCHING TV / CHANNEL CONTROL
1
2
3
Selected Device
GG
When no device is connected
GG
(displayed in gray)
4
When a device is connected
5
GG
(displayed in bright color)
1
TTVV vviieewwii nngg
2
DDII SSCC pp llaayybbaacckk
: Switch to the previous TV channel regardless of the current mode.
: Select and play connected discs.
When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen.
3
VVCCRR ppllaa yybb aacc kk
4
HHDDDD RReecc oorr ddiinnggss pp llaayybb aacckk
5
AAuudd iioo OOuutt ttoo HHoo mmee tthheeaa ttrr ee//AA uuddiioo OOuutt ttoo TTVV
: Play and control the connected VCR.
: Play and control recordings stored in HDD.
: Select Home theatre or TV speaker for Audio Out.
39
Loading...