|
|
|
User’s’s Guidei Specificationifi ti |
|
|
|
||
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Park SY |
KANG |
|
|
|
|
|
|
|
||
1. Model Description |
|
|
|
|||||
|
|
|
KWANG SUK |
|||||
|
|
|
07.11.06 |
|||||
|
|
|
|
|
|
|
07.11.06 |
|
|
|
|
|
|
|
|
|
|
MODEL |
50PC3DB-UL |
BRAND |
Zenith |
Part No. |
MFL34797058 |
|||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
SUFFIX |
USA |
Product Name |
Z50P3 |
|
(0711-REV00) |
|||
|
|
|
|
|
|
|
|
|
2. Printing Specification
1.Trim Size (Format) : 185mm x 260 mm
2.Printing Colors
•Cover : 1 COLOR (BLACK)
•Inside : 1 COLOR (BLACK) 3. Stock (Paper)
•Cover : Coated paper , S/White 150 g/
•Inside : Uncoated paper , 60 g/
4. Printing Method : Off set
5. Bindery : Saddle stitch
6. Language : English (1)
7. Number of pages : 32
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
NDetails should be followed Eco-SCM management standard[LG(56)-A-2524].
OEspecially, Part should be followed and controlled the following specification.
T(1)Eco-hazardous substances test report should be submitted
Ewhen Part certification test and First Mass Production.
S(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
3. Special Instructions
(1) Origin Notification
* LGEMX : Printed in Mexico |
* LGENT : Printed in China |
* LGEMA : Printed in Poland |
* LGETH : Printed in Thailand |
* LGERS : Printed in Mexico |
* LGENP : Printed in China |
* LGEWA : Printed in U.K. |
* LGEVN : Printed in Vietnam |
* LGEAZ : Printed in Brazil |
* LGEIL : Printed in India |
* LGEEG : Printed in Egypt |
|
* LGESP : Printed in Brazil |
* LGEDI : Printed in Indonesia |
* LGERA : Printed in Russia |
|
* LGESY : Printed in China |
* LGEIN : Printed in Indonesia |
* LGEAK : Printed in Kazakhstan |
4.Changes
9 |
|
8 |
|
7 |
|
6 |
|
5 |
|
4 |
|
3 |
|
2 |
|
1 |
|
REVNO.. MM/DD/YY SIGNATURE CHANGE NO. |
CHANGE CONTENTS |
Paginationi ti sheett
P/NO.MFL34797058 Total pages : 32 pages
Front cover |
|
|
|
|
|
|
|
Rear cover |
||
|
|
|
|
|
|
|
|
|
|
|
LG(EN) |
|
|
|
|
|
|
|
WTY |
|
WTY |
|
|
|
|
|
|
|
|
|
||
|
|
2 |
…. |
|
…. |
…. |
|
30 |
|
P/NO. |
|
|
|
|
|
|
|
MFL34797058-en-simple 11/6/07 4:52 PM Page 1
Installation and Operating Guide | Warranty
Model Number | Z50P3 | PLASMA TV
ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
An extended owner’s manual that contains information on the advanced features of these TV sets is located on the CD-ROM provided in an electronic version.
To read these files, you will need to use personal computer (PC) equipped with a CD-ROM drive.
© Copyright 2007, LG Electronics USA, Inc.
MFL34797058-en-simple 11/6/07 4:52 PM Page 2
WARNING / CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
WARNING / CAUTION
To prevent fire or shock hazards, do not expose this product to rain or moisture.
FCC NOTICE
Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CAUTION
Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product
2
MFL34797058-en-simple 11/6/07 4:52 PM Page 3
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus.
This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction:
Read
Heed all warnings. Follow all instructions.
1
5Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided
fit into your outlet, consult an replacement of the obsolete outlet.
2Clean only with dry cloth.
Do not block any ventilation openings. Install in
3accordance with the manufacturer’s instructions.
4Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat.
6Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
7Only use attachments/accessories specified by the manufacturer.
8Unplug this apparatus when unused for long periods of time.
3
MFL34797058-en-simple 11/6/07 4:52 PM Page 4
SAFETY INSTRUCTIONS
9 |
|
|
|
|
cord replaced |
|
|
|
|
|
|
authorized |
|
|
|
|
|
|
|
|
with the apparatus. When a cart is used, use |
|
servicer. Protect the power cord from physical |
||||
caution when moving the cart/apparatus |
|
or mechanical abuse, such as being twisted, |
||||
combination to avoid injury from tip-over. |
|
kinked, pinched, closed in a door, or walked |
||||
|
|
|
|
upon. Pay particular attention to plugs, wall |
||
|
|
|
|
outlets, and the point where the cord exits the |
||
|
|
|
|
appliance. |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10 |
Never touch this apparatus or antenna during |
|
|
11 |
Do not allow a impact shock or any objects to |
fall into the product, and do not drop onto the screen with something.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.
14 Outdoor use marking :
WARNING - To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
15 Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus.
13 CAUTION concerning the Power Cord :
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use
16 GROUNDING
Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Power
Supply
Short-circuit
Breaker
17 DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable.
4
MFL34797058-en-simple 11/6/07 4:52 PM Page 5
WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SAFETY INSTRUCTIONS
PREPARATION
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel Information
Back Panel Information
Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Back Cover for Wire Arrangement . . . . . . . . . . . . . . . . . . . . . 12
Attaching the TV to a wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 16
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
CONTENTS
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
WATCHING TV |
|
Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
21 |
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
21 |
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
21 |
Channel Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
22 |
On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
23 |
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Open Source Software Notice . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
HOW TO USE THE OWNER'S MANUAL ON THE CD-ROM
To view the Owner's Manual on the CD-ROM, Adobe Acrobat Reader must be installed on your PC. The “ACRORD" folder on the CD-ROM contains the installation programs for them.
If you want to install those programs, Open the “My Computer” Open the “ZENITH” Open the “ACRORD”double-click your language.
TO VIEW THE OWNER'S MANUAL ON THE CD-ROM
The Owner's Manual files are included in the supplied CD-ROM. Load the supplied CD-ROM into the CD-ROM drive of your PC.
After a while, the web page of the CD-ROM will open automatically. (for Window only)
When you select your product, display the PDF file.
You can find the desired contents easily using the bookmark.
! |
NOTE |
G If the web page does not appear automatically, open the Owner's Manual file directly. |
|
Open the “My computer” Open the “ZENITH” Open the “index.htm” file. |
|||
|
|
||
|
|
|
5
MFL34797058-en-simple 11/6/07 4:52 PM Page 6
PREPARATION
ACCESSORIES
PREPARATION
Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product.
User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product.
The accessories can be different from the figures shown here.
For further information, see the the Owner's Manual files supplied CD-ROM.
|
RATI |
|
|
|
|
W |
|
|
|
|
|
|
|
|
|
|
|
|
|
ER |
|
|
|
|
|
|
|
||
|
C |
O |
|
|
|
|
TVMODE |
|
|
|
|
|
|
|
|
EZ PICOMP1 C |
OMP2 |
|
|
|
DVD |
|
|
|
|
|
|
|
|
|
EZS |
|
|
|
VCR |
|
|
|
|
|
|
|
||
|
OUND |
ADJ |
HDM |
I1 |
RG |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
I |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TVNPUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
I |
|
|
P |
|
|
|
|
|
|
|
|
|
|
|
NPUT |
|
OWER |
MODE |
|
|
|
|
|
|
|
|
|
|
RATIO |
|
|
|
||
|
|
|
|
|
|
|
|
CO |
MP1 |
|
|
|
|
TV |
|
|
|
|
|
|
|
|
EZP |
COMP2 |
|
DVD |
|
||
|
|
|
|
|
|
|
|
IC EZ |
|
|
||||
|
|
|
|
|
|
|
|
|
SOU |
H |
DMI1 |
VCR |
|
|
|
|
|
|
|
|
|
|
|
|
ND |
ADJ |
RGB-PC |
|
|
|
V |
|
|
|
|
|
|
|
|
|
UST |
|
||
|
OL |
|
|
|
|
|
|
|
|
|
|
|
INFO |
|
|
|
|
|
|
|
|
EXI |
CC |
|
|
|
|
|
|
|
1 |
|
|
|
|
|
T |
M |
|
|
|
|
|
|
4 |
2 |
|
|
|
|
|
|
ENU |
SAP |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
7 |
5 |
|
|
|
|
|
EN |
|
TIMER |
|
|
|
|
|
|
8 |
|
|
|
|
|
TER |
|
|
|
|
|
|
|
0 |
9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FAV |
|
|
|
|
|
V |
|
|
|
|
|
|
|
|
|
|
|
|
|
OL |
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
CH |
|
|
|
|
|
|
1.5V |
|
|
4 |
8 |
|
|
6 |
|
|
|
|
|
|
||
|
|
|
|
|
2 |
|
|
|
|
|
|
|
||
|
7 |
|
|
|
|
5 |
3 |
|
|
|
|
|
|
|
|
|
0 |
|
|
|
9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
FAV |
|
|
|
|
|
|
|
|
Owner’s Manual |
CD Manual |
Remote Control, |
Power Cord |
|
(Refer to p.5) |
Batteries |
|
|
* |
Slightly wipe stained spot on the exterior only with the polishing |
|
|
|
cloth for the product exterior if there is stain or fingerprint on |
|
|
|
surface of the exterior. |
|
|
* |
Do not wipe roughly when removing stain. Please be cautions of |
|
75ohm Round Cable |
Polishing Cloth |
that excessive pressure may cause scratch or discoloration. |
|
|
|
For Plasma TV models
This feature is not available for all models |
42 inches only |
|
|
|
|
|
|
|
|
2-Eye-bolts |
2-Wall brackets |
2-Bolts for stand assembly |
D-sub 15 pin Cable |
|||
(Refer to p.14) |
(Refer to p.14) |
(Refer to p.15) |
|
|
|
|
For LCD TV models
This feature is not available for all models
Cable |
2- TV Bracket Bolts |
2- TV Brackets, |
Twist Holder |
Management |
(Refer to p.14) |
2- Wall Brackets |
Arrange the wires with |
|
|
(Refer to p.14) |
the twist holder. |
6
MFL34797058-en-simple 11/6/07 4:52 PM Page 7
FRONT PANEL INFORMATION
■Here shown may be somewhat different from your TV.
■NOTE: If your product has a protection tape attached, remove the tape.
And then wipe the product with a cloth (If a polishing cloth is included with your product, use it).
Front Panel Controls
Plasma TV Model
CH |
CHANNEL (D,E)Buttons |
VOL |
VOLUME (F,G)Buttons |
ENTER |
|
|
ENTER Button |
|
MENU |
|
MENU Button |
Remote Control Sensor |
INPUT |
|
INPUT Button |
Power/Standby Indicator |
|
Illuminates red in standby mode. |
POWER Button |
Illuminates green when the set is |
|
switched on. |
|
LCD TV Model
CH |
CHANNEL(D,E)Buttons |
|
VOL |
VOLUME(F,G)Buttons |
|
ENTER |
ENTER Button |
|
|
||
MENU |
MENU Button |
|
Remote Control Sensor |
|
|
INPUT |
INPUT Button |
|
Power/Standby Indicator |
POWER Button |
|
Illuminates red in standby mode. |
||
|
||
Illuminates green when the set is switched . |
|
PREPARATION
7
MFL34797058-en-simple 11/6/07 4:52 PM Page 8
PREPARATION
BACK PANEL INFORMATION
■ Here shown may be somewhat different from your TV.
PREPARATION
Plasma TV Model
|
AV IN 2 |
|
S-VIDEO |
|
AUDIO R |
11 |
VIDEO |
10
1
HDMI IN
2
1 HDMI/DVI IN
|
3 |
|
|
ANTENNA/ |
6 |
|
|
5 |
CABLE |
|
|
|
|
|
|
|
|
|
|
4 |
|
|
|
|
RGB(PC) |
AUDIO |
REMOTE DIGITAL AUDIO OUT |
|
|
|
|
(RGB/DVI) SERVICE |
CONTROL IN |
7 |
|
|
|
|
|
OPTICAL |
|
|
COMPONENT IN |
|
8 |
|
|
|
(CONTROL & SERVICE) |
|
|
||
|
|
|
9 |
|
|
|
|
|
|
|
|
2 |
|
|
( ) |
AUDIO OUT |
|
|
|
VIDEO |
|
||
|
|
|
1 |
|
|
|
|
|
|
10 |
|
1 |
VIDEO |
AUDIO |
S- |
MONO) AUDIO |
|
VIDEO |
|
||||
|
2 |
|
|
R |
|
|
|
|
|
|
LCD TV Model
11
S-VIDEO
VIDEO L/MONO AUDIO R
AV IN 2
10
3 |
|
ANTENNA/ |
6 |
5 |
CABLE IN |
|
|
1 |
|
|
|
4 |
|
|
|
|
|
|
HDMI IN |
RGB(PC) |
AUDIO |
|
(RGB/DVI) |
|
|
|
|
|
COMPONENT IN |
|
2 |
2 |
|
|
DIGITAL |
|
REMOTE |
AUDIO OUT |
|
CONTROL IN |
OPTICAL |
7 |
|
|
|
RS-232C IN |
|
8 |
|
|
|
(CONTROL & SERVICE) |
9 |
|
|
|
|
|
AUDIO OUT |
|
1 |
1 |
AUDIO |
HDMI/DVI IN |
VIDEO |
|
|
|
2
S-VIDEO VIDEO (MONO) AUDIO
10
AV
8
MFL34797058-en-simple 11/6/07 4:52 PM Page 9
1
Connect a HDMI (DVI) connection to either input.
2
Connect a component video/audio device to these jacks.
3RGB (PC)
Connect the output from a PC.
AUDIO (RGB/DVI)
Connect the audio from a PC or DTV.
4 SERVICE
5Remote Control Port
Connect a wired remote control.
6ANTENNA/CABLE IN
Connect over-the air signals to this jack. Connect cable signals to this jack.
7DIGITAL AUDIO OUT
Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
RS-232C IN (CONTROL & SERVICE) PORT
For external control devices.
9AUDIO OUT
Connect analog audio to various types of equipment.
PREPARATION
10 (Audio/Video) IN
Connect audio/video output from an external device to these jacks.
S-VIDEO
Connect S-Video out from an S-VIDEO device.
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on DC power.
9