LG X23FSF19 User Manual

Order Number

: GETEC-C1-19-504

FCC Part 18

Test Report Number

: GETEC-E3-18-029 Page 1 / 1

APPENDIX H

: USER’S MANUAL

EUT Type: Household Refrigerator

FCC ID.: BEJX23FSF19

OWNER’S MANUAL

REFRIGERATOR

Please read this owner's manual thoroughly before operating and keep it handy for reference at all times.

URNTS3106N URNTC2306N

www.LGSIGNATURE.com

MFL71439502_Rev.00

ENGLISH

TABLE OF CONTENTS

3 PRODUCT FEATURES

4 IMPORTANT SAFETY

INSTRUCTIONS

7 COMPONENTS

7 Refrigerator Exterior 8 Refrigerator Interior

9 INSTALLATION

9 Installation Overview 10 Specifications 11 Unpacking the Refrigerator 11 Choosing the Proper Location 11 - Flooring 12 - Ambient Temperature 12 - Measuring the Clearances 12 Removing/Assembling the Doors 17 Connecting the Water Line 17 - Before You Begin 18 - Water Pressure 18 - What You Will Need 19 - Water Line Installation Instructions 20 Turning On the Power 21 Leveling 21 Door Mullion and Auto Open Door 21 Door Alignment 21 - Adjusting Door Height

30 Storing Food 30 - Food Preservation Location 31 - Food Storage Tips 31 - Storing Frozen Food 32 Adjusting the Refrigerator Shelves 32 - Detaching the Shelf 32 - Assembling the Shelf 33 - When Closing the Door 33 CustomChill™ Pantry 33 - Setting the CustomChill™ Pantry 34 Crisper Drawers 34 - Removing the Crisper Drawers 34 - Assembling the Crisper Drawers 35 - Removing the Crisper Support Box 35 - Assembling the Crisper Support Box 36 Removing the CustomChill™ Pantry Insert 36 Hidden Bar Tray 36 InstaView™Door-in-Door® 37 EasyLift Bin 37 Freezer Drawer 37 - Removing the Freezer Drawer 38 - Assembling the Freezer Drawer 38 - Removing the Drawer Support 39 - Assembling the Drawer Support 39 Refrigerator/Freezer Door Bins

41 SMART FUNCTIONS

41 LG ThinQ Application 45 Smart Grid Function 46 Using the Voice Assistant 48 Smart Diagnosis™ Feature

22 HOW TO USE

22 Before Use 23 Wi-Fi Eclipse Display 23 - Wi-Fi Eclipse Display Features 25 - Using the Wi-Fi Eclipse Display 26 In-Door Ice Bin 26 - Detaching the In-Door Ice Bin 26 - Assembling the In-Door Ice Bin 27 Automatic Icemaker 29 Ice and Water Dispenser

49 MAINTENANCE

49 Cleaning 50 Replacing the Fresh Air Filter 51 Replacing the Water Filter

55 TROUBLESHOOTING

66 LIMITED WARRANTY

ENGLISH

PRODUCT FEATURES

Depending on the model, some of the following functions may not be available.

DOOR ALARM

The Door Alarm function is designed to prevent refrigerator malfunctioning that could occur if a refrigerator door or freezer door remains open. If a refrigerator door or freezer door is left open for more than 60 seconds, a warning alarm sounds at 30 second intervals until it is closed.

AUTO CLOSING HINGE

The refrigerator doors close automatically with a slight push. (The door only closes automatically when it is open at an angle less than 30°.)

ICE PLUS

Ice production can be increased by approximately 20 percent when the freezer section is maintained at the coldest temperature for a 24-hour period.

MEASURED FILL DISPENSER

Select from the Measured Fill menu on the dispenser to quickly dispense pre-measured amounts automatically.

InstaView™Door-in-Door®

Two quick knocks on the sleek, mirrored glass panel allow you to see inside the easy access compartment without opening the door. This reduces cold air loss, and helps keep food fresh longer.

AUTO OPEN DOOR

This smart sensor is located at the foot of the refrigerator and opens the door automatically. When you stand in front of the refrigerator, lighted "Door Open" text is projected onto the floor. Step on the text and the door gently opens.

FOLD-DOWN BIN RAILS

Use the metal bars on the Door-in-Door bins as either bin dividers or as rails to keep tall items secure.

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

This guide contains many important safety messages. Always

This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product.

All safety messages will be preceded by the safety alert symbol and the hazard signal word WARNING or CAUTION. These words mean:

WARNING

CAUTION

You can be killed or seriously injured if you do not follow instructions.

Indicates an imminently hazardous situation which, if not avoided, may result

in minor or moderate injury, or product damage.

read and obey

all safety messages.

WARNING

To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following:

Power

•NEVER unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull it straight out from the outlet.

•If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

•Do not use an uncertified power outlet.

•Unplug the power plug immediately in the event of a blackout or thunderstorm.

•Plug in the power plug with the power cord facing downward.

Installation

•Contact an authorized service center before you install or relocate the refrigerator.

•When moving your refrigerator away from the wall, be careful not to roll over or damage the power cord.

•Prior to use, ensure that you are connecting this product to a dedicated, grounded electrical outlet rated for use with this product (115V, 60Hz, AC only). It is the user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet.

•Do not install the refrigerator where there may be a danger of the unit falling.

Use

•DO NOT allow children to climb, stand, or hang on the refrigerator doors or on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.

•Do not hang on to or place heavy objects on the refrigerator’s dispenser.

•Do not place heavy or dangerous objects (bottles with liquid) on the refrigerator.

•Do not put live animals inside the refrigerator.

•Do not allow children to climb into the product when it is in use.

•In the event of a gas leak (propane/LPG), ensure adequate ventilation and contact an authorized service center before resuming use. Do not touch or disassemble the electric outlet of the refrigerator.

•In the event of a refrigerant leak, move flammable objects away from the refrigerator. Ensure adequate ventilation and contact an authorized service center.

•Do not use or place flammable substances (chemicals, medicine, cosmetics, etc) near the refrigerator or store them inside the refrigerator. Do not place the refrigerator in the vicinity of flammable gas.

•Do not overfill or pack items too tightly into door bins. Doing so may cause damage to the bin or personal injury if items are removed with excessive force.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following:

•Do not hit the glass door panel with excessive force. Do not allow hard objects like cookware or glass bottles to hit the glass door panel. The glass could break, resulting in a risk of personal injury or product damage.

•This product is not to be used for special purposes such as the storage of medicine or test materials or for use on ships, etc.

•Unplug the power plug before cleaning or repairing the refrigerator.

•When you replace the light bulb in the refrigerator, unplug the refrigerator or turn off the power.

•Do not modify or extend the power cord.

•Do not use a dryer to dry the interior. Do not light a candle to remove interior odors.

•For your safety, this appliance must be properly grounded. Have the wall outlet and the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

•Do not use an outlet that can be turned off with a switch. Do not use an extension cord. It is the user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet.

•Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

•Do not use an adapter plug and plug the power plug into a multi-outlet extension cord.

•Disconnect the power cord immediately if you hear a noise, smell a strange odor or detect smoke coming from the appliance.

•Turn the power off if water or dust penetrates into the refrigerator. Call a service agent.

•Do not disassemble or modify the refrigerator.

•Do not put hands, feet, or metal objects below or behind the refrigerator.

•Do not operate the refrigerator or touch the power cord with wet hands.

•In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector mechanism or with the heating element that releases the cubes. Do not place fingers or hands on the automatic ice-making mechanism while the refrigerator is plugged in.

•When dispensing ice from the dispenser, do not use crystal ceramics.

•Do not touch the cold surfaces in the freezer compartment with wet or damp hands, when your refrigerator is in operation.

•Do not put glass containers, glass bottles or soda in the freezer.

•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

•Do not refreeze frozen food that has thawed completely. Doing so may result in a serious health issue.

•If you are throwing away your old refrigerator, make sure the CFC coolant is removed for proper disposal by a qualified servicer. If you release CFC coolant, you may be fined or imprisoned in accordance with the relevant environmental law.

•Junked or abandoned refrigerators are dangerous, even if they are sitting for only a few days. When disposing of the refrigerator, remove the packing materials from the door or take off the doors but leave the shelves in place so that children may not easily climb inside.

•If connected to a circuit protected by fuses, use time delay fuse.

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following:

CAUTION

Installation

•The refrigerator must be properly installed in accordance with the Installer Instructions that were taped to the front of the refrigerator.

•Be careful when you unpack and install the refrigerator. Immediately dispose of plastic and other packing materials out of reach of children.

•The appliance must be positioned for easy access to a power source.

Use

•Close the door carefully when children are around.

•Keep fingers out of pinch point areas; clearances between the doors and cabinets are necessarily small. Be careful closing doors when children are nearby.

•If you store food improperly, be aware that it may fall and cause injury.

•Do not use aerosols near the refrigerator.

•Do not store articles on the top of the appliance.

Maintenance

•Do not use strong detergents like wax or thinners for cleaning. Clean with a soft cloth.

•Wipe foreign objects (such as dust and water) off the prongs of the power plug and contact areas regularly.

•Do not store, disassemble or repair the refrigerator by yourself.

•Remove any dust or foreign matter from the power plug pins.

•Do not use a wet or damp cloth when cleaning the plug.

•If the refrigerator is disconnected from the power supply, you should wait for at least five minutes before plugging it back in.

•If you notice a chemical or burning plastic smell or see smoke, unplug the refrigerator immediately and contact your LG Electronics Service Center.

SAVE THESE INSTRUCTIONS

ENGLISH

COMPONENTS

Use this page to become more familiar with the parts and features of your refrigerator. *The appearance and specifications of the actual product may differ depending on the model.

Refrigerator Exterior

InstaView™ Door-in-Door®

Wi-Fi Eclipse Display

Intuitively displays status and enables control of fridge/ freezer temperatures,

Dispenser Control Panel

Displays the icemaker and dispenser modes and the water filter status.

Filtered Water and Ice Dispenser

Dispenses purified water and ice.

energy consumption monitoring, smart saving, and smart grid features.

Refrigerator

Preserves food.

Freezer

Preserves frozen food.

ENGLISH

COMPONENTS

Refrigerator Interior

LED Interior Lamp

The interior lamps light up the inside of the refrigerator.

Refrigerator Bin

Indoor Ice Bin

Ice cubes are automatically produced.

Crisper

Adjustable Refrigerator Shelf

The shelves in your refrigerator are adjustable to meet your individual storage needs.

InstaView™ Door-in-Door®

See what's inside the Door-in-Door compartment without opening the door. Keeps the cold air inside and saves energy.

Condiment Bin

Crisper

CustomChill™ Pantry

Hidden Bar Tray

Freezer Bin

Freezer Drawer

Freezer Bin

Freezer Drawer

INSTALLATION

4±2mm4±2mm

INSTALLATION

Installation Overview

Please read the following installation instructions first after purchasing this product or transporting it to another location.

1 Unpacking your

refrigerator

2 Choosing the proper

location

3 Disassembling/Assembling

ENGLISH

4 Connecting the

water supply and water line

5 Leveling and Door

NOTE

Connect to potable water supply only.

Alignment

•It may be necessary to increase the refrigerator's tilt after the door bins are filled to compensate for the increased weight of the doors.

•Check if the gap between Holder and Pillar is 4±2mm. As in the figure, pull forward and backward with hand with speedy feeling, and check if Pillar is normally folded and spread.

ENGLISH

INSTALLATION

Specifications

The appearance and specifications listed in this manual may vary due to constant product improvements.

Bottom-freezer refrigerator model URNTS3106N

Description French-door refrigerator

Electrical requirements 115 VAC @ 60 Hz

Min./Max. Water pressure

Dimensions

Net weight 483 lb. (219 kg)

Bottom-freezer refrigerator model URNTC2306N

Description French-door refrigerator

Electrical requirements 115 VAC @ 60 Hz

Min./Max. Water pressure

Dimensions

Net weight 430 lb. (195 kg)

20 - 120psi (138 - 827kPa)

35 7/8”(W) x 36 1/2”(D) x 70 1/4”(H) x 51 1/8”(D w/ door open) 912(W) X 929(D) X 1784(H) X 1298 mm (D w/ door open)

20 - 120psi (138 - 827kPa)

35 7/8”(W) x 29 5/8”(D) x 70 1/4”(H) x 44 3/16”(D w/ door open) 912(W) X 754(D) X 1784(H) X 1123 mm (D w/ door open)

INSTALLATION

ENGLISH

Unpacking the Refrigerator

WARNING

•Use two or more people to move and install the refrigerator. Failure to do so can result in back or other injury.

•Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it. Do not wiggle or walk the refrigerator when trying to move it, as floor damage could occur.

•Keep flammable materials and vapors, such as gasoline, away from the refrigerator. Failure to do so can result in fire, explosion, or death.

Remove tape and any temporary labels from your refrigerator before using. Do not remove any warning-type labels, the model and serial number label, or the Tech Sheet that is located under the front of the refrigerator. But, when you remove tape and temporary label, remove them after pulling out the power plug.

To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator.

Refrigerator shelves are installed in the shipping position. Please reinstall shelves according to your individual storage needs.

Choosing the Proper Location

•Select a place where a water supply can be easily connected for the automatic icemaker.

NOTE

The water pressure must be 20~120 psi or 138~827 kPa or 1.4~8.4 kgf/cm² on models without a water filter and 40~120 psi or 276~827 kPa or 2.8~8.4 kgf/cm² on models with a water filter.

•The refrigerator should always be plugged into its own individual properly grounded electrical outlet rated for 115 Volts, 60 Hz, AC only, and fused at 15 or 20 amperes. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires. It is recommended that a separate circuit serving only this appliance be provided.

WARNING

To reduce the risk of electric shock, do not install the refrigerator in a wet or damp area.

Flooring

To avoid noise and vibration, the unit must be leveled and installed on a solidly constructed floor. If required, adjust the leveling legs to compensate for unevenness of the floor. The front should be slightly higher than the rear to aid in door closing. Leveling legs can be turned easily by tipping the cabinet slightly. Turn the leveling legs to the left to raise the unit or to the right to lower it. (See Leveling and Door AlIgnment.)

NOTE

Installing on carpeting, soft tile surfaces, a platform or weakly supported structure is not recommended.

ENGLISH

INSTALLATION

Ambient Temperature

Install this appliance in an area where the temperature is between 55°F (13°C) and 110°F (43°C). If the temperature around the appliance is too low or high, cooling ability may be adversely affected.

Measuring the Clearances

Too small of a distance from adjacent items may result in lowered freezing capability and increased electricity consumption charges. Allow at least 24 inches (61 cm) in front of the refrigerator to open the doors, and at least 2 inches (5.08 cm) between the back of the refrigerator and the wall.

24” (61 cm)

Removing/Assembling the Doors

Removing the Left Refrigerator Door

The water supply is connected to the

upper right part of the rear surface of the refrigerator. Remove the ring in the joint area. Hold the water supply connection and gently push the collet to detach the water supply line as shown in

Collet

NOTE

Detachment of the water supply line is applicable only when detaching the left refrigerator door.

2” (5.08 cm)

Remove the screws from the hinge cover

at the top of the refrigerator. Lift the hook(not visible), located on the side of the cover at the bottom edge, with a flat-head screwdriver.

INSTALLATION

ENGLISH

Remove the cover and pull out the tube .

Disconnect all wire harnesses

Rotate the hinge lever counterclockwise

. Lift the top hinge free of the hinge

lever latch.

Hinge Lever Latch

CAUTION

When lifting the hinge free of the latch, be careful that the door does not fall forward.

Removing the Right Refrigerator Door

Remove the screws from the hinge cover

at the top of the refrigerator. Lift the hook(not visible), located on the side of the cover at the bottom edge, with a flat-head screwdriver.

Detach the wire harness .

Rotate the hinge lever clockwise.

Lift the top hinge lever latch.

free of the hinge

Lift the door from the middle hinge pin and

remove the door.

CAUTION

Place the door, inside facing up, on a non-scratching surface.

Hinge Lever Latch

CAUTION

When lifting the hinge free of the hinge lever latch, be careful that the door does not fall forward.

ENGLISH

INSTALLATION

Lift the door from the middle hinge pin and

remove the door.

CAUTION

Place the door, inside facing up, on a non-scratching surface.

Removing the Freezer Doors

Remove the two hinge bolts.

Disconnect all wire harnesses.

Remove the door by lifting it off the lower

hinge pin.

Lower hinge

Twist the hinge to raise the pivoting end

so that the door can be lifted off. Lift the door off the lower hinge pin and remove it.

Unscrew the screw that attaches the

lower hinge cover and remove the cover.

Assembling the Freezer Doors

Lower the door onto the lower hinge pin.

Connect the wire harnesses.

INSTALLATION

ENGLISH

Position the bottom hinge cover in its place

and tighten the cover screw .

Position the middle hinge pin in place to

hold the door and insert the two hinge bolts.

Tighten the two hinge bolts.

Assembling the Right Refrigerator Door

Install the right refrigerator door first.

Make sure that the plastic sleeve is

inserted in the bottom of the door. Lower the door onto the middle hinge pin as shown in the figure.

Fit the hinge over the hinge lever latch

and slot it into place. Rotate the lever counterclockwise to secure the hinge.

Hinge Lever Latch

Connect the wire harness .

Position the cover in its place. Insert and

tighten the cover screws.

ENGLISH

INSTALLATION

Assembling the Left Refrigerator Door

Install the left refrigerator door after the right door is installed.

Make sure that the plastic sleeve is

inserted in the bottom of the door. Install the refrigerator door onto the middle hinge pin.

Fit the hinge over the hinge lever latch

and slot it into place. Rotate the lever clockwise

Hinge Lever Latch

and fasten the hinge.

Push the water supply tube into the hole

on the top case and pull it through the backplate.

Hold the water supply connection and

gently push in the collet to connect the water supply line as shown in the tube at least connector.

/8 inch (15 mm) into the

Collet

. Insert

Connect all the wire harnesses.

Position the cover in its place. Insert and

tighten the cover screws.

INSTALLATION

ENGLISH

NOTE

Collet

Tube

Insert Line

1) Gently insert the tube until only one line shows on the tube.

(Correct)

(Incorrect)

2) Pull the tube to make sure that the tube is tightly fastened.

Connecting the Water Line

Before You Begin

This water line installation is not covered by the refrigerator warranty. Follow these instructions carefully to minimize the risk of expensive water damage.

Water hammer (water banging in the pipes) in house plumbing can cause damage to refrigerator parts and can lead to water leakage or flooding. Call a qualified plumber to correct water hammer before installing the water supply line to the refrigerator.

CAUTION

To prevent burns and product damage, only connect the refrigerator water line to a cold water supply.

If you use your refrigerator before connecting the water line, make sure the icemaker power switch on the control panel is in the OFF position.

CAUTION

Do not install the icemaker tubing in areas where temperatures fall below freezing.

ENGLISH

INSTALLATION

Water Pressure

The water pressure must be 20~120 psi or 138~827 kPa or 1.4~8.4 kgf/cm² on models without a water filter and 40~120 psi or 276~827 kPa or 2.8~8.4 kgf/cm² on models with a water filter.

If a reverse osmosis water filtration system is connected to the cold water supply, this water line installation is not covered by the refrigerator warranty. Follow the instructions carefully to minimize the risk of expensive water damage.

If a reverse osmosis water filtration system is connected to the cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276~414 kPa or

2.8~4.2 kgf/cm², less than 2.0~3.0 sec. to fill a cup of 7 oz or 198 cc capacity).

CAUTION

Wear eye protection during installation to prevent injury.

If the water pressure from the reverse osmosis system is less than 20 psi or 138 kPa or 1.4 kgf/ cm² (takes more than 4.0 sec to fill a cup of 7 oz or 198 cc capacity):

•Check to see if the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

•Allow the storage tank on the reverse osmosis system to refill after heavy usage.

•If the issue concerning water pressure from reverse osmosis remains, call a licensed, qualified plumber.

•All installations must be in accordance with local plumbing code requirements.

What You Will Need

•Copper Tubing,

connect the refrigerator to the water supply. Be sure both ends of the tubing are cut square.

•To determine how much tubing you need: measure the distance from the water valve on the back of the refrigerator to the water supply pipe. Then, add 8 feet (2.4 m). Be sure there is sufficient extra tubing (about 8 feet [2.4 m] coiled into 3 turns of about 10 in. [25 cm] diameter) to allow the refrigerator to move out from the wall after installation.

•Power drill.

•½ in. or adjustable wrench.

•Flat blade and Phillips head screwdrivers.

•Two ¼ in. outer diameter compression nuts and 2 ferrules (sleeves)

copper tubing to the shutoff valve and the refrigerator water valve.

•If your existing copper water line has a flared fitting at the end, you will need an adapter (available at plumbing supply stores) to connect the water line to the refrigerator OR you can cut off the flared fitting with a tube cutter and then use a compression fitting.

•Shutoff valve

water line. The shutoff valve should have a water inlet with a minimum inside diameter of 5/32 in. at the point of connection to the COLD WATER LINE. Saddle-type shutoff valves are included in many water supply kits. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes.

¼ in. outer diameter, to

to connect the

to connect to the cold

NOTE

A self piercing saddle type water valve should not be used.

INSTALLATION

ENGLISH

Water Line Installation Instructions

WARNING

When using any electrical device (such as a power drill) during installation, be sure the device is battery powered, double insulated or grounded in a manner that will prevent the hazard of electric shock.

Install the shutoff valve on the nearest frequently used drinking water line.

SHUT OFF THE MAIN WATER SUPPLY

Turn on the nearest faucet to relieve the pressure on the line.

CHOOSE THE VALVE LOCATION

Choose a location for the valve that is easily accessible. It is best to connect into the side of a vertical water pipe. When it is necessary to connect into a horizontal water pipe, make the connection to the top or side, rather than at the bottom, to avoid drawing off any sediment from the water pipe.

DRILL THE HOLE FOR THE VALVE

Drill a ¼ in. hole in the water pipe using a sharp bit. Remove any burrs resulting from drilling the hole in the pipe. Be careful not to allow water to drain into the drill. Failure to drill a ¼ in. hole may result in reduced ice production or smaller cubes.

NOTE

The hookup line cannot be white, plastic tubing. Licensed plumbers must use only copper tubing (NDA tubing #49595 or #49599) or Cross Link Polyethylene (PEX) tubing.

FASTEN THE SHUTOFF VALVE

Fasten the shutoff valve to the cold water pipe with the pipe clamp.

Pipe Clamp

Saddle-Type

Shutoff Valve

Vertical Cold Water Pipe

NOTE

Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to. Saddle valves are illegal and their use is not permitted in Massachusetts. Consult with your licensed plumber.

TIGHTEN THE PIPE CLAMP

Tighten the clamp screws until the sealing washer begins to swell.

Do not overtighten the clamp or

NOTE:

you may crush the tubing.

Washer

Pipe Clamp

Clamp Screw

ROUTE THE TUBING

Route the tubing between the cold water line and the refrigerator.

Route the tubing through a hole drilled in

the wall or floor (behind the refrigerator or adjacent base cabinet) as close to the wall as possible.

Inlet End

NOTE

Be sure there is sufficient extra tubing (about 8 feet coiled into 3 turns of about 10 in. diameter) to allow the refrigerator to move out from the wall after installation.

ENGLISH

INSTALLATION

CONNECT THE TUBING TO THE VALVE

Place the compression nut and ferrule (sleeve) for the copper tubing onto the end of the tubing and connect it to the shutoff valve. Make sure the tubing is fully inserted into the valve. Tighten the compression nut securely.

Saddle-Type Shutoff Valve

Packing Nut

Outlet Valve

FLUSH OUT THE TUBING

Turn the main water supply on and flush out the tubing until the water is clear.

Shut the water off at the

water valve after about one quart of water has been flushed through the tubing.

CONNECT THE TUBING TO THE

REFRIGERATOR

Before making the connection

NOTE:

to the refrigerator, be sure that the refrigerator power cord is not plugged into the wall outlet.

a. Remove the plastic flexible cap from the

water valve.

b. Place the compression nut and ferrule

(sleeve) onto the end of the tubing as shown.

c. Insert the end of the copper tubing into

the connection as far as possible. While holding the tubing, tighten the fitting.

Compression Nut

Ferrule (sleeve)

TURN THE WATER ON AT THE SHUTOFF

VALVE Tighten any connections that leak.

CAUTION

Check to see if leaks occur at the water line connections.

PLUG IN THE REFRIGERATOR

Arrange the coil of tubing so that it does not vibrate against the back of the refrigerator or against the wall. Push the refrigerator back to the wall.

START THE ICEMAKER

Turn the icemaker ON at the control panel.

The icemaker will not begin to operate

until it reaches its operating temperature of 15°F (–9°C) or below. It will then begin operation automatically if the icemaker has been turned ON.

Turning On The Power

Plug in the refrigerator.

Tubing Clamp

¼ in. Compression Nut

Ferrule (sleeve)

¼ in. Tubing

Refrigerator Connection

CAUTION

•Connect to a rated power outlet.

•Have a certified electrician check the wall outlet and wiring for proper grounding.

•Do not damage or cut off the ground terminal of the power plug.

ENGLISH

NOTE

The front leveling legs must be extended fully so they are in firm contact with the floor (even if leveling or door alignment is not needed).

Leveling

After installing, plug the refrigerator’s power cord into a 3-prong grounded outlet and push the refrigerator into the final position.

INSTALLATION

Make sure both front leveling legs are

extended fully and in firm contact with the floor.

Follow the instructions in the Door

Alignment section to raise the left refrigerator door until the door mullion is once again working properly.

Adjust the right refrigerator door so it

aligns with the left refrigerator door.

The refrigerator has two front leveling legs— one on the right and one on the left. Adjust the legs to alter the tilt from front-to-back or sideto-side. If the refrigerator seems unsteady, or you want the doors to close more easily, adjust the refrigerator’s tilt using the instructions below:

Turn the leveling leg to the left to raise

that side of the refrigerator or to the right to lower it. It may take several turns of the leveling leg to adjust the tilt of the refrigerator.

NOTE

A flare nut wrench works best, but an open-end wrench will suffice. Do not over-tighten.

Open both doors again and check to make

sure that they close easily. If the doors do not close easily, tilt the refrigerator slightly more to the rear by turning both leveling legs to the left. It may take several more turns, and you should turn both leveling legs the same amount.

Door Mullion and Auto Open Door

Once the door bins are filled, the doors may become misaligned, preventing the door mullion or the Auto Open Door function from working properly.

Door Alignment

If the floor is not flat, the door heights may differ. In this case, use the following method to adjust the difference.

Adjusting Door Height

Adjusting Fridge Door Height

Height difference

Adjusting Freezer Door Height

Open the fridge door and use a wrench to rotate the door hinge bolt as shown.

Fridge door

Freezer door

Open the freezer door and use a wrench to rotate the door hinge bolt as shown.

Freezer door

If the mullion on the left refrigerator door does not open and close properly or the right door stays ajar after the Auto Open Door function, follow the directions below.

Height difference

ENGLISH

HOW TO USE

Before use

Clean the refrigerator.

Clean the refrigerator thoroughly and wipe off all dust that accumulated during shipping.

CAUTION

•Do not scratch the refrigerator with a sharp object or use a detergent that contains alcohol, a flammable liquid or an abrasive when removing any tape or adhesive from the refrigerator,.

•Do not peel off the model or serial number label or the technical information on the rear surface of the refrigerator.

NOTE

Remove adhesive residue by wiping it off with your thumb or dish detergent.

Open refrigerator and freezer doors to ventilate the interior.

The inside of the refrigerator may smell like plastic at first. Remove any adhesive tape from inside the refrigerator and open the refrigerator and the freezer doors for ventilation.

Connect the power supply.

Check if the power supply is connected before use. Read the “Turning On The Power” section.

Turn off the icemaker if the refrigerator is not yet connected to the water supply.

Turn off the automatic icemaker and then plug the power plug of the refrigerator into the grounded electrical outlet.

* This is applicable only to certain models.

CAUTION

Running the automatic icemaker before connecting it to the water supply may cause the refrigerator to malfunction.

Wait for the refrigerator to cool.

Allow your refrigerator to run for at least two to three hours before putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling.

CAUTION

Putting food in the refrigerator before it has cooled could cause the food to spoil, or a bad odor could linger inside the refrigerator.

The refrigerator makes a loud noise after initial operation.

This is normal. The volume will decrease as the temperature lowers.

+ 53 hidden pages