LG WT30BTS6 Owner's Manual

<![if ! IE]>

<![endif]>ESPAÑOL ENGLISH

OWNER’S MANUAL

WASHING MACHINE

Please read this owner's manual thoroughly before operating and keep it handy for reference at all times.

WT30VTS6

WT30BTS6

MFL68267018

www.lg.com

2 TABLE OF CONTENTS

TABLE OF CONTENTS

	3	IMPORTANT SAFETY INSTRUCTIONS		27	CARE AND CLEANING
	3	Basic Safety Precautions	27		Regular Cleaning
	4	Grounding Requirements			27	Cleaning the Exterior
	5	Safety Instructions for Installation			27	Care and Cleaning of the Interior
	6	Safety Instructions for Use, Care, Cleaning and			27	Tub Clean Cycle
		Disposal			27	Removing Mineral Buildup
					27	Leave the Lid Open
	7	FEATURES AND BENEFITS	28		Maintenance
			29		Cleaning the Washer
	7	Key Parts and Components
	7	Included Accessory		30 SMART FUNCTIONS
	7	Required Accessory
			30		Application Installation
	8	INSTALLATION INSTRUCTIONS	30		Using the Wi-Fi Function
			31		Open Source Software Notice Information
	8	Choose the Proper Location
	8	Power Outlet		32 SPECIFICATIONS
	8	Flooring
	9	Unpacking and Removing Shipping Material
	10	Connecting the Water Lines	32		SMART DIAGNOSIS™ SYSTEM

11Connecting the Drain Hose

12Leveling the Washer

	13	Connect to the Power Supply		33 TROUBLESHOOTING
	13	Sorting Wash Loads
			33		Normal Sounds You May Hear
	15	About the Dispensers
	15	Detergent and Dispenser Use	33		Before Calling for Service
			37		Error Codes
	17	HOW TO USE

17Control Panel Features

18Time and Status Display

19Operating the Washer 20 Cycle Guide

22 Wash Cycles

23 Cycle Modifier Buttons

24 Options

25 Option Buttons

25 Steam

25 Cold Wash

25 Delay Wash

25 Custom Program(PGM)

25 Turbo Wash™

26 Fabric Softener

26 Extra Rinse

26 Water Plus

26 Signal

26 Child Lock

26 Add Garment

IMPORTANT SAFETY INSTRUCTIONS

3

important safety instructions

SAFETY MESSAGES

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death. Your safety and the safety of others is very important. There are many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death.

All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION. These words mean:

danger You will be killed or seriously injured if you don’t immediately follow instructions. WARNING You can be killed or seriously injured if you don’t follow instructions.

caution	You may be slightly injured or cause damage to the product if you do not follow
	instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

BASIC SAFETY PRECAUTIONS

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

yy Use this appliance only for its intended purpose as described in this Owner's Manual. yy Before use, the washer must be properly installed as described in this manual.

yy Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.

yy Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

yy Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

yy Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. A child might become trapped inside the washer and suffocate.

yy Before the washer is removed from service or discarded, remove the lid to prevent children from climbing inside.

yy Do not install or store the washer where it will be exposed to the weather or freezing temperatures. yy Do not tamper with controls.

yy Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags, etc.), gasoline, chemicals and other flammable vapors and liquids.

yy Service must be performed by a qualified service technician. Do not disassemble the washer. yy See Installation Instructions for grounding requirements.

yy ALWAYS follow the fabric care instructions supplied by the garment manufacturer.

<![if ! IE]>

<![endif]>ENGLISH

4 IMPORTANT SAFETY INSTRUCTIONS

yy Do not place items exposed to cooking oil in your washer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

yy Use fabric softeners or products to eliminate static only as recommended by the manufacturer.

yy This washer is not designed for maritime use or for mobile installations such as in RVs, aircraft, etc.

yy Turn off the water faucets and unplug the washer if the machine is to be left for an extended period of time, such as during vacations.

yy Do not use to dry articles containing foam rubber or similarly textured rubber-like materials.

yy Packaging material can be dangerous for children. There is a risk of suffocation! Keep all packaging from children.

yy Always check the inside of the washer for foreign objects before loading laundry. Keep the lid closed when not in use.

yy Do not reach into the appliance if the tub or agitator is moving.

yy In the event of a gas leak(such as propane gas, LP gas, etc.), ventilate the area immediately. Do not turn any appliance or light on or off. Do not use a ventilating fan. A spark may result in an explosion or fire.

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion or electric shock, or to prevent property damage, injury to persons, or death.

GROUNDING REQUIREMENTS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.

This appliance is not intended for use by persons (including children) with reduced physical,sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

IMPORTANT SAFETY INSTRUCTIONS

5

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.

safety instructions for installation

WARNING

To reduce the risk of fire, electric shock or injury to persons when using this appliance, follow basic precautions, including the following:

yy Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures. Installation instructions are packed with the washer for installer’s reference. If the washer is moved to a new location, have it checked and reinstalled by a qualified service technician. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy For personal safety, this appliance must be properly grounded. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock from this appliance.

yy This washer must be plugged into a 120 V~, 60 Hz grounded outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy Do not install on carpet. Install washer on a solid floor. Failure to follow this warning can cause serious leak damage.

yy Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet.

Failure to follow these warnings can cause serious injury, fire, electric shock, or death.

yy The washer should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

yy Never unplug your washer by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy Repair or immediately replace all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy When installing or moving the washer, be careful not to pinch, crush, or damage the power cord. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy The washer must be installed and electrically grounded by a qualified service person in accordance with local codes to prevent shock hazard and assure stability during operation.

yy The washer is heavy. Two or more people may be needed to install and move the appliance. Failure to do so can result in back or other injury.

yy Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to follow this warning can cause serious leak damage.

yy To reduce the risk of electric shock, do not install the washer in humid spaces. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety warnings in this manual could result in property damage, injury to persons or death.

yy Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

yy To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning.

yy Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor. If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire.

<![if ! IE]>

<![endif]>ENGLISH

6 IMPORTANT SAFETY INSTRUCTIONS

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING AND DISPOSAL

WARNING

To reduce the risk of fire, electric shock or injury to persons when using this appliance, follow basic precautions, including the following:

yy Unplug the washer before cleaning to avoid the risk of electric shock.

yy Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.

yy Do not put oily or greasy rags or clothing on top of the washer. These substances give off vapors that could ignite the materials.

yy Do not wash items that are soiled with vegetable or cooking oil. These items may contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.

yy Disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy Do not combine laundry products for use in one load unless specified on the label.

yy Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow package directions when using laundry products. Incorrect usage can produce poisonous gas, resulting in serious injury or death.

yy Do not reach into the washer while parts are moving. Before loading, unloading, or adding items, press the START/PAUSE button and allow the drum to coast to a complete stop before reaching inside. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. As children grow, teach them the proper, safe use of all appliances. Failure to comply with these warnings could result in serious injury to persons or death.

yy Destroy the carton, plastic bag, and other packing materials after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers. Failure to comply with these warnings could result in serious injury to persons or death.

yy Keep laundry products out of children’s reach. To prevent injury to persons, observe all warnings on product labels. Failure to comply with these warnings could result in serious injury to persons or death.

yy Remove the lid to the washing compartment before your washer is removed from service or discarded to avoid the danger of children or small animals getting trapped inside. Failure to do so can result in serious injury to persons or death.

yy Keep hands and foreign objects clear of the lid and latch area when closing the lid. Failure to keep hands clear can result in personal injury.

yy Do not touch the power plug with wet hands. This may result in electric shock.

yy Do not touch the water draining from the machine during a high-temperature wash or drying cycle. This water is hot, and touching it may result in burns or injury.

yy Do not stand on top of the appliance or place objects(such an laundry, lighted candles,lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance. This may result in electric shock, fire, problems with the product, or injury.

yy Do not install or store the washer where it will be exposed to freezing temperatures. Water may freeze in the hoses and damage the washer. Winterize the washer before storing or moving it in freezing temperatures. Refer to the Maintenance section for instructions.

yy Do not push the Lid too hard. There is a risk of breaking Lid Glass.

save these instructions

FEATURES AND BENEFITS		7

features and benefits

KEY PARTS AND COMPONENTS

A	INVERTER DIRECT DRIVE MOTOR
	The inverter motor directly connected to
	the tub produces less noise and vibration
	while offering outstanding durability with a
	longer lifespan.

B	ULTRA CAPACITY & NEVERUST™
	STAINLESS STEEL TUB
	The efficient design provides you with ultra
	large capacity.
c	TURBOWASH™
	TurboWash™ reduces wash time without
	compromising performance. The precise
	drum movements and powerful water
	jets allow faster soaking, while the Smart
	Rinse™ Jet Spray allows quicker rinsing,
	saving you up to 30 minutes per load with-
	out sacrificing washing performance.
D	ALLERGIENE™
	This powerful, high-temperature steam cy-
	cle is designed to reduce up to 95 percent
	of common household allergens such as
	dust mites and pet dander, and is certified
	by the Asthma and Allergy Foundation of
	America (AAFA).
E	REAR TOUCH PANEL
	The easy to read LED display shows cycle
	options, setting, cycle status and estimat-
	ed time remaining. The touch buttons offer
	more convenience and a premium design
	aesthetic.

Dispensers

(See page 15)

Lid

Liquid bleach

compartment (See page 15)

Tub

Control panel (See page 17)

Leveling feet

Hot Water Cold Water

Inlet valve Inlet valve

Power

Cord

Drain

Hose

F

G

SLAM PROOF™LID

The Slam Proof™ lid is a safety device that closes the lid slowly. The Slam Proof™ hinges allow the lid to close gently and quietly, helping prevent injuries.

SMART DIAGNOSIS™

If you ever experience an issue with your LG washer, you don’t have to worry. The SmartDiagnosis™ feature helps the service center diagnose problems over the phone, or with a simple app on your smart phone, helping you minimize costly, inconvenient service calls.

Included ACCESSORY

yy Tie Strap (for securing drain hose)

<![if ! IE]>

<![endif]>ENGLISH

8 INSTALLATION INSTRUCTIONS

installation instructions

CHOOSE THE PROPER LOCATION

WARNING

yy The washer is heavy. Two or more people are required when moving and unpacking the washer. Failure to do so may result in damage to property or serious bodily harm.

yy Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy Properly ground the washer to conform with all electric governing codes and ordinances.

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy To reduce the risk of electric shock, do not install the washer in humid spaces. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yy To ensure proper air flow, do not block the large opening on the bottom of the washer with carpeting or other materials.

yy Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

Power Outlet

yy The power outlet must be within 60 in. (1.5 m) of either side of the washer.

yy The appliance and outlet must be positioned so that the plug is easily accessible.

yy Do not overload the outlet with more than one appliance.

yy The outlet must be grounded in accordance with current wiring electric codes and regulations.

yy Time-delay fuse or circuit breaker is recommended.

NOTE: It is the personal responsibility and obligation of the product owner to have a proper outlet installed by a qualified service technician.

FLOORING

yy To minimize noise and vibration, the washer MUST be installed on a solidly constructed floor.

yy Allowable slope under the entire washer is a maximum 1 inch(2,5 cm). difference from side to side or from front to back.

yy Installing on carpeting and soft tile surfaces is not recommended.

yy Never install the washer on a platform or weakly supported structure.

NOTE: The washer must be installed on firm flooring to minimize vibration during the spin cycle. Concrete flooring is best, but a wood floor is sufficient, provided it is built to FHA standards. The washer should not be installed on rugs or exposed to weather.

			45 1/4”
			(115.0 cm)
	1”	29”	1”
		(74.0 cm)
	(2.5 cm)		(2.5 cm)

To ensure sufficient clearance for water lines and airflow, allow minimum clearances of at least 1 in. (2.5 cm) at the sides and 4 in. (10 cm) behind the unit. Be sure to allow for wall, door, or floor moldings that may increase the required clearances.

34 5/8”

(87.9 cm)

31” (79.0 cm)

3 1/2" (9 cm)

59 5/8”

(151.5 cm)

29” (74.0 cm)

Minimum vertical space from floor to overhead shelves, cabinets, ceilings, etc., is 60 in(1,5 m).

UNPACKING AND REMOVING SHIPPING MATERIAL

1.After removing the carton and shipping material, lift the washer off the foam base. Make sure the plastic tub support comes off with the base and is not stuck to the bottom of the washer.

If you must lay the washer down to remove the base packaging materials, always protect the side of the washer and lay it carefully on its side. DO NOT lay the washer on its front or back.

INSTALLATION INSTRUCTIONS

9

3.Unfasten the power cord from the back of the washer.

TOOLS YOU WILL NEED

yAdjustable Pliers

yCarpenter's Level

<![if ! IE]>

<![endif]>ENGLISH

Plastic Tub Support

Carton Base

2.Save the foam block (that contains the Owner’s Manual, parts and laundry product samples) for future use. If the washer must be moved in the future, the foam block will help prevent damage to the washer during transportation.

NOTE: To prevent damage, do not remove the foam block until the washer is at the final location.

10 INSTALLATION INSTRUCTIONS

CONNECTING THE WATER LINES

yy LG recommends the use of LG hoses. Any leaking, property damage, or damage to the washing machine caused by an improper installation or by the use of non-LG hoses is not covered under the terms of the LG warranty and is the sole responsibility of the customer and/or an installer.

yy Water supply pressure must be between 20 psi and 120 psi (138~827 kPa). If the water supply pressure is more than 120 psi (827kPa), a pressure reducing valve must be installed.

yy Periodically check the hose for cracks, leaks, and wear, and replace the hose if necessary.

yy Make sure that the water lines are not stretched, pinched, crushed, or kinked.

yy The washer should never be installed or stored in a location subject to freezing temperatures. Damage to the water lines and internal mechanisms of the washer can result. If the washer was exposed to freezing temperatures prior to installation, allow it to stand at room temperature for several hours before use and check for leaks prior to operation.

NOTE: Do not use flood-preventing hoses with auto shutoff devices. The devices can be tripped during fill and prevent the machine from filling properly.

Rubber Seal

Rubber Seal

Water Hose
(to water inlet	Water Hose
on washer)	(to tap)

1.Inspect the threaded fitting on each hose and make sure there is a rubber seal in place in both ends of each hose.

2.Connect the water supply hoses to the HOT and COLD water faucets tightly by hand and then tighten another 2/3 turn with pliers.

WARNING

yyDo not overtighten. Damage to the coupling can result.

3.Always run a gallon or two of water through each inlet hose to flush dirt, scale and other debris out of the water lines. Doing so will help prevent future problems with clogged filter screens, and will also allow you to verify which water line is hot and which is cold.

Hot water inlet

Cold water inlet

Water Faucet

WARNING

yyDo not reuse old hoses. Only use new hoses when you install the washing machine. Old hoses could leak or burst causing flooding and property damage.

WARNING

yyDo not overtighten the hoses. Overtightening can damage the valves resulting in leaking and property damage.

4.Attach the hot water line to the hot water inlet on the back of the washer. Attach the cold water line to the cold water inlet on the back of the washer. Tighten the fittings securely. Turn ON both faucets all the way and check for leaks at both ends of the hoses.

NOTE: Be careful not to cross-thread the hose fittings. This will damage the valve and could result in property damage from leaks.

INSTALLATION INSTRUCTIONS

11

CONNECTING THE DRAIN HOSE

yy The drain hose should always be properly secured. Failure to properly secure the drain hose can result in flooding and property damage.

yy The drain must be installed in accordance with any applicable local codes and regulations.

yy Make sure that the drain hose is not stretched, pinched, crushed, or kinked.

Drain Hose

caution

yy Do not insert the end of the drain hose into the standpipe more than 8 inches (20cm). Doing so can cause siphoning, odors, or improper draining.

8”(20 cm)

No more than 8 inches (20cm)

Tie Strap

Option 2: Laundry Tub

Bend the end of the drain hose to the desired shape and support it on the edge of the laundry tub. Use the tie strap to secure the drain hose in place.

Option 1: Standpipe

Bend the outlet end of the drain hose to form a U shape. Insert the end of the drain hose into the drain. If the drain is large enough for the flange on the hose to fit inside, then do not insert the flange more than 1-2 inches into the drain. Use the tie strap included with the installation materials in the foam block in the tub to secure the drain hose to the drain.

If the water valves and drain are built into the wall,

39” 39” (99 cm)

(99 cm)

Tie Strap

Tie Strap

fasten the drain hose to one of the water hoses with the tie strap (ribbed side on inside).

If your drain is a standpipe, fasten the drain hose to the standpipe with the tie strap provided.

NOTE:

yy Normal height of the end of the hose should be approximately 35”-47” (0.9-1.2 m) from the floor. yy Do not install the end of the drain hose lower than 29 in. (73.7 cm) or higher than 96 in. (243.8 cm) above the bottom of the washer or more than 60

in. (152.4 cm) away from the washer.

yy Never create an airtight seal between the hose and the drain with tape or other means. If no air gap is present, water can be siphoned out of the tub resulting in poor wash/rinse performance or clothing damage.

Drain Hose

NOTE:

yy Do not use this drain hose with a floor drain. The end of the drain hose must be at least 29 inches (74 cm) above the floor for proper draining to occur.

<![if ! IE]>

<![endif]>ENGLISH

12 INSTALLATION INSTRUCTIONS

LEVELING THE WASHER

The tub of your new washer spins at very high speeds. To minimize vibration, noise, and movement, the floor must be a level, solid surface.

NOTE:

•Adjust the leveling feet only as far as necessary to level the washer. Extending the leveling feet more than necessary can cause the washer to vibrate.

•Before installing the washer, make sure that the floor is clean, dry and free of dust, dirt, water and oil so the washer feet cannot slide easily. Leveling feet that move or slide on the floor can contribute to excessive vibration and noise due to poor contact with the floor.

All four leveling feet must rest solidly on the floor. Attempt to rock the washer from corner to corner to make sure that all four leveling feet are in firm contact with the floor.

1.Position the washer in its final location, taking special care not to pinch, strain, or crush the water and drain lines. Place a level across the top of the washer.

the cabinet side meets the top cover. Do not place the level on the top of the lid. Using these surfaces will result in the washer being unlevel.

Lower Raise

WARNING

Raise

Lower

2.Adjust the leveling feet. Turn clockwise to raise the washer or counterclockwise to lower it.

3.To make sure that the washer is properly level, open the lid and look from above to see if the tub is centered. If the tub is NOT centered (as shown in the drawing with the X through it), readjust the front feet. If you have a level, check your washer with the level.

yTo check if the washer is level from side to side, place a level on the back edge of the lid.

yTo check if the washer is level front to back, place a level at the side of the washer on the edge where

NOTE:

•If the washer’s level is not even, the lid may be automatically closed when it is open. If such case occurs, raise the front leg to adjust the level of the washer to be even.

INSTALLATION INSTRUCTIONS 13

CONNECT TO THE POWER SUPPLY SORTING WASH LOADS

The washer should be plugged into a 120 V~ 60 Hz grounded 3-prong outlet. Plug in the washer. Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service technician

if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electrical shock, or death.

WARNING

yyThe power outlet must be within 60 inches (1.5 m) of either side of the washer.

yyThe appliance and outlet must be positioned so that the plug is easily accessible.

yyDo not overload the outlet with more than one appliance.

yyThe outlet must be grounded in accordance with current wiring codes and regulations.

yyTime-delay fuse or circuit breaker is recommended.

yyIt is the personal responsibility and obligation of the product owner to have a proper outlet installed by a qualified electrician.

yyDo not use a worn or damaged power cord or power plug. Replace or repair it immediately.

Failure to do so may result in death, fire, electric shock, or malfunction.

yyDo not modify the power cord and take care not to damage it when installing or moving the washing machine. Failure to do so may result in death, fire, electric shock, or malfunction.

yyMake sure that the washing machine is grounded.

yyConnect this washing machine to a grounded outlet conforming to the rating prior to use.

Failure to do so may result in fire, electric shock, or malfunction.

yyDo not use adaptors or extension cords. The washing machine should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. Failure to do so may result in fire, electric shock or disorder.

yyDo not damage or cut off the ground prong of the power cord. Doing so may cause death, fire, electric shock, or product malfunction.

caution

yy Do not load items higher than the top edge of the tub. Failure to follow this caution can result in leakage or damage to fabrics.

yy Use the Bedding cycle for buoyant or nonabsorbent items such as pillows or comforters. Failure to follow this caution can result in leakage.

yy If possible, do not wash any water-resistant items. If you must, please select the Waterproof cycle.

( i.e. Water resistant clothing, mattress covers, outdoor clothes, plastic mats etc.)

yy If waterproof material laundry is washed in a course other than Waterproof, it may result in injury or damage to the washer, clothes, walls, floor, and surrounding objects due to abnormal vibration.

Grouping Similar Items

For the best washing results, and to reduce the possibility of damage to clothing, care should be taken to sort the clothing into loads that are made up of similar items.

Mixing different fabric types and/or soil levels can result in poor wash performance, color transfer, discoloration, fabric damage or linting. Fabrics should be sorted into groups as described below.

Colors

Sort articles by color. Wash dark clothes together in a separate load from light colors or whites. Mixing dark clothes with light clothes can result in dye transfer or discoloration of the lighter clothes.

Soil Level

Wash heavily soiled clothing together. Washing lightly soiled clothing in the same load with heavily soiled clothing could result in poor wash performance for the lightly soiled clothing.

Fabric Type

Delicate articles should not be mixed with heavier or sturdier fabric types. Washing heavier fabrics in a delicate load can result in poor wash performance for the heavier fabrics and possible damage to the delicates.

Lint Type

Some fabrics attract and bind lint to them while others give off lint in the laundry process. Avoid mixing these lint collectors and lint producers in the same load. Mixing these fabrics will result in pilling and linting on the lint collectors. (For example, lint collector – knit sweater; lint producer – terry cloth towels.)

Sort Laundry…

By Colors	By Soil	By Fabric	By Lint
White	Heavy	Delicates	Lint Producer
Lights	Normal	Easy Care	Line Collector
Darks	Light	Sturdy

<![if ! IE]>

<![endif]>ENGLISH

14 INSTALLATION INSTRUCTIONS

FABRIC CARE LABELS

Many articles of clothing include a fabric care label. Using the chart below, adjust the cycle and option selections to care for your clothing according to the manufacturer’s recommendations.

Fabric Care Labels

NOTE: Use the Bedding cycle for large or bulky items such as poly-filled jackets, comforters, pillows, etc. These items may not be as absorbent as other laundry items and should be sorted into a separate wash load for optimal results.

Bulky items should be placed as far down in the tub as possible for optimal results. Always place buoyant items at the bottom of the tub. The washer will automatically detect the load size. Because of the highefficiency wash system, the water level may not completely cover the load.

1. For best performance, load clothes as shown.

Do this

Not this

LOADING THE WASHER

yCheck all pockets to make sure that they are empty. Items such as clips, matches, pens, coins, and keys can damage both your washer and your clothes.

yClose zippers, hooks, and drawstrings to prevent these items from snagging or tangling on other clothes.

yPretreat heavily stained areas for best results.

yCombine large and small items in a load. Load large items first.

yLarge items should not be more than half of the total wash load.

yThe washer can be fully loaded, but the tub should not be tightly packed with items. The lid of the washer should close easily.

yTo prevent an out-of-balance load, do not wash single items. Add one or two similar items to the load. Large, bulky items, such as a blanket, comforter, or bedspread, should be washed individually.

yWaterproof items do wash or spin Waterproof cycle. (i.e. Water resistant clothing, mattress covers, outdoor clothes, plastic mats etc.)

yThe washer will not fill or operate with the lid open.

2.Load clothes loosely, and do not load clothes over the maximum guideline on the tub. Clothes need room to circulate in order to get clean.

Maximum guide line

INSTALLATION INSTRUCTIONS 15

ABOUT THE DISPENSERS

The automatic dispenser consists of two compartments which hold:

yy Liquid fabric softener.

yy Liquid or powdered detergent for the main wash.

Main Wash	Main Wash
Powdered Detergent	Liquid Detergent
Compartment	Compartment
Liquid Fabric
Softener
Compartment
	Insert

Dispenser Drawer

Main Wash Detergent Compartment

This compartment holds laundry detergent for the main wash cycle. The detergent is added to the load at the beginning of the cycle. Always use High-Effi- ciency (HE) detergent with your washing machine. Either powdered or liquid detergent may be used.

Never exceed the manufacturer’s recommendations when adding detergent. Using too much detergent can result in detergent buildup in clothing and the washer.

When using liquid detergent, make sure the liquid detergent cup and insert are in place. Do not exceed the maximum fill line.

When using powdered detergent, remove the liquid detergent cup from the compartment. Powdered detergent will not dispense with the liquid detergent cup in place.

Liquid Bleach

Compartment

Liquid Bleach Compartment

The bleach dispenser is a separate compartment at the left front of the tub opening. This compartment holds liquid bleach, which is dispensed automatically at the proper time during the wash cycle. Any liquid remaining in the dispenser at the end of the cycle is water, not bleach.

yy Do not add powdered bleach to this compartment. The bleach compartment is designed to dispense liquid bleach only. Powdered or liquid color-safe bleach will not dispense properly.

yy Always follow the manufacturer’s recommendations when adding bleach. Never add more than one cup and do not exceed the maximum fill line since this can cause the bleach to be dispensed immediately, resulting in damage to fabrics. Using too much bleach can damage fabrics.

yy Never pour undiluted liquid chlorine bleach directly onto the load or into the tub. Fabric damage can occur.

yy Do not use color-safe bleach or Oxi products in the same cycle with liquid chlorine bleach.

danger

Do NOT mix chlorine bleach with ammonia or acids, such as vinegar or rust/scale remover. Mixing chemicals like these can produce a lethal gas, resulting in severe injury or death.

Fabric Softener Compartment

This compartment holds liquid fabric softener, which is automatically dispensed during the final rinse cycle.

Never exceed the manufacturer’s recommendations when adding softener. Using too much fabric softener can result in damage to clothing and the washer. Either powdered or liquid fabric softener.

yy Always follow the manufacturer’s recommendations when adding fabric softener. Do not exceed the maximum fill line. Using too much fabric softener may stain clothes.

yy Dilute concentrated fabric softeners with warm water. Do not exceed the maximum fill line.

yyNever pour fabric softener directly onto the load or into the tub.

DETERGENT AND DISPENSER USE

A WORD ABOUT DETERGENTS

High-Efficiency (HE) detergents produce fewer suds, dissolve more efficiently to improve washing and rinsing performance, and help to keep the interior of your washer clean. Using detergent that is not HE may cause oversudsing and unsatisfactory performance which could result in error codes, cycle failure, and machine damage.

	Maximum
	Normal Load Amount
Liquid	Powder
Detergent	Detergent

<![if ! IE]>

<![endif]>ENGLISH

16 INSTALLATION INSTRUCTIONS

For proper wash performance, always measure the detergent using the measuring device provided by the detergent manufacturer.

The normal amount of HE detergent needed, for average loads, is less than ½ of the recommended maximum. Use less detergent for soft water, light soil or smaller loads. Never use more than the maximum amount recommended by the detergent manufacturer.

Designed To Use Only

High-Efficiency (He)

Detergent

IMPORTANT: Your washing machine is designed for use with only High-Efficiency (HE) detergents. HE detergents are formulated specifically for High-Effi- ciency washers and contain suds-reducing agents. Always look for the HE symbol when purchasing detergent.

IMPORTANT: Not all detergents are the same. Pay careful attention to the amount of detergent used to avoid oversudsing, poor rinsing and detergent buildup in clothing, and residue buildup that can contribute to odors in the machine. NEVER use a cup or scoop other than the one supplied by the manufacturer of the detergent you are using. Never use more than the maximum amount of detergent recommended by the manufacturer. A full scoop or measure of detergent should only be used for very large and heavily soiled loads. Using too much detergent can result in detergent buildup in the washer and in your clothes.

Always measure the detergent amount. While HE detergents are designed for this type of washing machine, be careful when measuring the detergent. For most normal loads, no more than 1/4 to 1/2 a cap or scoop of HE detergent should be used.

NOTE:

yy Extra care must be exercised when using 2X and 3X concentrated detergents because even a little bit extra can contribute to the problems mentioned above. yy Detergents designated as HE compatible may not

provide optimal results.

Using the Softener and Detergent Dispenser

To add detergent, and fabric softener to the automatic dispenser:

1.Open the dispenser drawer.

2.Load the laundry products into the appropriate compartments.

3.Close the drawer before starting the cycle.

4.If using fabric softener on NORMAL cycle, press the Fabric Softener button or select the EXTRA RINSE option.

NOTE: It is normal for a small amount of water to remain in the bleach dispenser and softener compartment at the end of the cycle.

IMPORTANT: Do not place or store laundry products, such as detergent, bleach, or liquid fabric softener, on top of your washer or dryer. Wipe up any spills immediately. These products can damage the finish and controls.

Using the Liquid Bleach Dispenser

Bleach

The bleach dispenser automatically dilutes and dispenses liquid bleach at the proper time in the wash cycle.

1.Check clothing care labels for special instructions.

2.Measure liquid bleach carefully, following instructions on the bottle. High-efficiency washers use less water, so less bleach is needed. One half cup is enough for most loads.

3.Carefully pour the pre-measured amount of bleach directly into the bleach dispenser. If you are using powdered bleach of any kind, pour it directly into the tub before adding the laundry. Never add powdered bleach to the liquid bleach dispenser.

yy Never pour undiluted liquid chlorine bleach directly onto clothes or into the tub.

yy Do not pour powdered bleach into bleach dispenser. yy Do not place laundry items on top of the bleach dispenser when loading and unloading the washer.

yy Always measure and pour bleach carefully. Avoid overfilling or splashing when adding bleach to the dispenser. The maximum capacity of the bleach dispenser is one cup of bleach per wash cycle. Overfilling could result in bleach being dispensed immediately, which can result in damage to the clothes in the washer.

HOW TO USE 17

HOW TO USE

CONTROL PANEL FEATURES

A B C E F E

		the standard presets will appear in the						mated time remaining.
									D
		display. These settings can be adjusted
		using the cycle setting buttons any time
		before starting the cycle.
A POWER (ON/OFF) BUTTON							c START/PAUSE BUTTON
		Press to turn the washer ON. Press again to						Press this button more than 0.4 seconds
		turn the washer OFF. Pressing the POWER						hold to start the selected cycle. If the wash-
		button during a cycle will cancel that cycle						er is running, use this button to pause the
		and any load settings will be lost. The lid will						cycle without losing the current settings.
		unlock after a brief pause.						NOTE: If you do not press the START/
		NOTE:						PAUSE button within 60 minutes of select-
		• If there is any water remaining in the tub						ing a cycle, the washer automatically turns
		after the washer shuts off, it will drain fol-						OFF and all cycle settings are lost. And any
		lowing 4-minutes delay. The washer can						water remaining in the tub will be drained.
		be restarted any time before the drain be-					D CYCLE MODIFIER BUTTONS
		gins. However, once the water begins to
		drain, all functions will be suspended until						Use these buttons to adjust the settings for
		the water has been completely drained						the selected cycle. The setting lights above
		and the washer shuts off.						the buttons illuminate to show the current
		• When you press Power button, Normal						selection.
		Course will be lighted on. But, to select					E
		Normal Cycle, you need to turn the knob						SPECIAL CYCLE AND OPTION BUTTONS
		to turn on the light of Normal Course and
		activate the set options.						These buttons allow you to select special
								cycles or options.
B		CYCLE SELECTOR KNOB					F	TIME AND STATUS DISPLAY
		Turn this knob to select the desired cycle.
		Once the desired cycle has been selected,						The display shows the cycle status and esti-

NOTE: To protect your clothing, not all settings are available on all cycle selections.

<![if ! IE]>

<![endif]>ENGLISH

18 HOW TO USE

TIME AND STATUS DISPLAY

The time and status display shows the estimated time remaining and cycle progress.

A

B C

A Lid lock INDICATOR

The Lid Lock indicator will illuminate once a cycle has started. The indicator light will stay on until the cycle is paused, stopped or has finished.

B WI-FI CONNECT INDICATOR

The indicator blinks during product registration and Wi-Fi setup and illuminates When the appliance is connected to a home Wi-Fi network.

D

C CYCLE STATUS INDICATOR

These LEDs will illuminate when a cycle is selected to indicate which stages will run. When a cycle is running, the LED for the active stage will blink, and the LEDs for the remaining stages will remain steady. Once a stage is complete, the LED will turn off. If a cycle is paused, the active stage LED will stop blinking.

D ESTIMATED TIME REMAINING

When a cycle is selected, the default time for that cycle is displayed. This time will change as modifiers or options are selected. Once the START/PAUSE button is pressed, the washer will measure the size of the load. The estimated time may change once the load size has been measured. If Delay Wash is set, the remaining delay time counts down until the cycle begins.

NOTE: The time shown is only an estimate. This time is based on normal operating conditions. Several external factors (load size, room temperature, incoming Water temperature, water pressure, etc.) can affect the actual time.

HOW TO USE 19

OPERATING THE WASHER

	1	SORT LAUNDRY AND LOAD THE WASHER
		Sort laundry by fabric type, soil level, color and
		load size, as needed. Open the lid and load items
		into the washer.
Bleach	2	CLEANING PRODUCTS
Softener		Add High-Efficiency (HE) detergent to the deter-
		gent dispenser. If bleach or fabric softener is to
Detergent
		be used, add these to the appropriate dispensers.
	3	TURN ON THE WASHER
		Press the POWER button to turn ON the washer.
		The lights around the cycle selector knob will il-
		luminate and a chime will sound.
	4	SELECT A CYCLE
		Turn the cycle selector knob in either direction to
		select the desired cycle. The preset Wash Temp.,
		Spin, Soil, Options and option settings for that cycle
		will be shown. When you press Power button, Nor-
		mal Course will be lighted on. But, to select Normal
		Cycle, you need to turn the knob to turn on the light
		of Normal Course and activate the set options.
	5	ADJUST SETTINGS
		Default settings for the selected cycle can now
		be changed, if desired, using the cycle modifier
		and option buttons.
		NOTE: Not all modifiers and options are available
		on all cycles. A different chime will sound and the
		LED will not come on if the selection is not allowed.
	6	BEGIN CYCLE
		Press and hold the START/PAUSE button to be-
		gin the cycle. The lid will lock, and the washer
		will agitate briefly without water to measure the
		weight of the load. If the START/PAUSE button is
		not pressed within 60 minutes, the washer will
		shut off and all settings will be lost.
	7	ADD GARMENT LIGHT
		The Add Garment light will illuminate near the be-
		ginning of the wash cycle to indicate when it is
		safe to add items to the load. Press the START/
		PAUSE button to pause the cycle and add gar-
		ments to the load. Press the START/PAUSE but-
		ton to resume the cycle.
		NOTE: It is not recommended to add items un-
		less the Add Garment light is illuminated, as this
		could result in poor performance and/or clothing
		damage.
	8	END OF CYCLE
		When the cycle is finished, a melody will sound.
		Immediately remove your clothing from the
		washer to reduce wrinkling.

WARNING

yyTo reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY

INSTRUCTIONS before operating this appliance.

<![if ! IE]>

<![endif]>ENGLISH

20 HOW TO USE

CYCLE GUIDE

The cycle guide below shows the default settings, available options and recommended fabric types for each cycle. Allowable modifier adjustments are shown below the default setting for each cycle.

Default Setting

●Available options

Cannot be used if Steam is selected

■Turbo Wash™ will be deselected

Cycle	Fabric or	Wash Mode	Temp.	Spin	Soil	Soak	Stain	Extra	Water	Delay	Maximum
	Load Type						Care	Rinse	Plus	Wash	load
			Extra Hotb	Extra High	Heavy
	Cotton, linen,	Steam	Hot	High			■c				Less
Normal	shirts, jeans,	Turbo Wash™	Warm	Medium	Normal			●	●	●	than
	mixed loads	Cold Washb	Cold	Lowa							30,0kg
			Tap Cold	No Spin	Light
		No Option		Extra High	Heavy
Heavy Duty	Heavily soiled	Steam	Hot	High							Less
		Turbo Wash™	Warm	Medium	Normal			●	●	●	than
	cotton fabrics
			Cold	Low							30,0kg
			Tap Cold	No Spin	Light
	Large items	No Option			Heavy
		Steam	Hot								Less
	such as blan-
								●		●	than
			Warm	Medium	Normal
	kets, comfort-
		Cold Wash	Cold	Low							18,0kg
	ers, and sheets.
Bedding			Tap Cold	No Spin	Light
	Use the Bedding cycle for items such as pillows, comforters, pet bedding and other articles which have difficulty
	absorbing water. DO NOT WASH EXCESSIVELY LARGE ITEMS. If large/bulky items do not fit easily into the
	tub, there may not be enough room for them to move during washing. Keep like items together; do not mix large
	bulky items with smaller clothing items. Failure to follow these instructions may result in damage to the clothing
	or to the washer.
	Heavily soiled	No Option	Extra Hot	Extra High	Heavy
	underwear,	Steam		High							Less
Sanitary	work clothes,	Turbo Wash™		Medium	Normal			●	●	●	than
	diapers, etc.
				Low							5,0kg
	(less than 11
	lbs.)			No Spin	Light
	Cotton,		Extra Hot	Extra High	Heavy
	underwear,	Steam		High							Less
	pillow covers,			Medium	Normal
Allergiene™								●	●	●	than
	bed sheets,			Low
											5,5kg
	baby wear. (less
	than 12 lbs.)			No Spin	Light
		No Option		Extra High	Heavy
Bright		Steam	Hot	High							Less
	White fabrics	Turbo Wash™	Warm	Medium	Normal			●	●	●	than
Whites™
				Low							30,0kg
				No Spin	Light
	Refer to page	Steam	Hot	High
Tub Clean										●	0kg
	27.

Light

aThe Low spin speed is available only with the Heavy soil level.

bCold Wash and Extra Hot are not available with the Heavy soil level.

cStain Care cannot be used if Cold Wash is selected.

NOTE: The following options can only be used independently of each other: Steam, Turbo Wash™, Fabric Softener, Cold Wash.

Soak and Stain Care cannot be selected together.

HOW TO USE 21

CYCLE GUIDE

The cycle guide below shows the default settings, available options

Default Setting

and recommended fabric types for each cycle. Allowable modifier

●

Available options

adjustments are shown below the default setting for each cycle.

Cannot be used if Steam is selected

■

Turbo Wash™ will be deselected

Cycle

Fabric or

Wash Mode

Temp.

Spin

Soil

Soak

Stain

Extra

Water

Delay

Maximum

Load Type

Care

Rinse

Plus

Wash

load

No Option

Extra High

Pre Wash+

Shirts, jeans,

Hot

High

Less

Warm

Medium

Normal

●

●

●

than

mixed loads

Normal

Cold

Low

30,0kg

Tap Cold

No Spin

Light

Dress shirts/

No Option

High

Heavy

Less

pants, wrinkle-

Perm. Press

free clothing, poly/

Turbo Wash™

Warm

Medium

Normal

●

●

●

●

than

cotton blend cloth-

Cold Wash

Cold

Low

30,0kg

ing, tablecloths

Tap Cold

No Spin

Light

Waterproof items

No Option

Heavy

- i.e. Water

Less

resistant clothing,

Warm

Normal

Waterproof

mattress covers,

●

●

●

than

Cold

Low

outdoor clothes,

6,5kg

plastic mats etc.

Tap Cold

No Spin

Light

(less than 14 lbs.)

Dress shirts/

No Option

Heavy

Less

blouses, nylons,

Delicates

sheer or lacy gar-

Warm

Normal

●

●

●

●

than

ments (less than

Cold

Low

3,5kg

8 lbs.)

Tap Cold

No Spin

Light

No Option

Extra High

Heavy

Big towels,

Hot

High

■c

Less

Towels

Turbo Wash™

Warm

Medium

Normal

●

●

●

●

than

small towels

Cold Wash

Cold

Low

18,0kg

Tap Cold

No Spin

Light

Extra High

Heavy

Lightly soiled and

High

Less

Speed Wash

Turbo Wash™

Warm

Medium

Normal

●

●

●

●

than

small loads

Cold

Low

30,0kg

Tap Cold

No Spin

Light

The downloaded

Downloaded

cycle (See page

22.)

aThe Low spin speed is available only with the Heavy soil level.

bCold Wash and Extra Hot are not available with the Heavy soil level.

cStain Care cannot be used if Cold Wash is selected.

NOTE: The following options can only be used independently of each other: Steam, Turbo Wash™, Fabric Softener, Cold Wash.

Soak and Stain Care cannot be selected together.

NOTE:

To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available with every cycle. A chime will sound and the LED will not light if the selection is not allowed.

*When a cycle is selected, the default time for that cycle is displayed. This time will change as modifiers or options are selected. Once the START/PAUSE button is pressed, the washer will measure the load. The estimated time may change once the load has been measured. The washer automatically adjusts the wash time for the amount of laundry, water pressure, water and other operating conditions.

<![if ! IE]>

<![endif]>ENGLISH

22 HOW TO USE

WASH CYCLES

Wash cycles are designed for the best wash performance for each type of load. Select the cycle that best matches the load contents for maximum wash performance and fabric care. Turn the knob to the desired cycle. When you select a wash cycle, the light for the corresponding wash cycle will turn on. See page 19, OPERATING THE WASHER, for more details on operating methods.

Normal

Use this cycle to wash all normal items, except delicate fabrics such as wool or silk.

NOTE: Pressing the START/PAUSE button without selecting a cycle will cause the NORMAL cycle to begin immediately using the default settings.

Heavy Duty

This cycle is for washing heavily soiled laundry using more powerful wash motions.

NOTE: When washing large loads, in order to deliver the best performance, there will be brief periods of 2 minutes or more without agitation. These soak periods are part of the cycle's design, and are normal.

Bedding

This cycle is for washing blankets or bulky items.

NOTE: Do not use this cycle to wash a mixed load of bedding and non-bedding items.

Sanitary

This wash cycle reduces 99.9% bacteria on laundry through high temperature.

Allergiene™

This cycle is a powerful, high temperature cycle designed specifically to reduce certain allergens.

NOTE:

yySelecting the ALLERGIENE™ cycle automatically incorporates steam into the wash cycle.

yyThe ALLERGIENE™ cycle can significantly reduce allergens in bedding and clothing.

yyThe ALLERGIENE™ cycle helps reduce dust mite populations and helps reduce allergens. Due to the higher energy and temperatures used, the ALLERGIENE™ cycle is not recommended for wool, silk, leather, or any other delicate or temperature-sensitive items

Bright Whites™

This cycle is for washing white items only.

Tub Clean

Use this cycle to clean the tub of your washing machine.

Pre Wash+

Normal

Use this cycle to prewash stains without needing to hand-wash. Prompt treatment helps to prevent stains from setting or odors from developing.

Perm.Press

This cycle is for washing items such as wrinkle-free clothes or tablecloths to minimize wrinkles.

Waterproof

This cycle is used for washing waterproof material.

NOTE:

yyDo not use any other wash cycle to wash waterproof fabrics. ( i.e. Water resistant clothing, mattress covers, outdoor clothes, plastic mats etc.) yyDo not use this cycle to wash a mixed load of

waterproof and non-waterproof items.

yyUse only the waterproof cycle, after checking the washing instruction label on the fabric.

yy Do not wash other fabrics using the waterproof cycle.

WARNING

yyIf waterproof material laundry is washed in a course other than Waterproof, it may result in injury or damage to the washer, clothes, walls, floor, and surrounding objects due to abnormal vibration.

Delicates

This cycle is for washing lingerie or sheer and lacy clothes which can easily be damaged.

Towels

Use this cycle for washing towels, shirts, jeans and mixed loads.

Speed Wash

Use the Speed Wash cycle to quickly wash lightly soiled clothing and small loads. For high wash and rinse efficiency, washing small loads of 2-3 lightly soiled garments is recommended.

NOTE: Use very little detergent in this cycle. If you want additional rinsing, you can add extra rinses by using the Extra Rinse button.

Downloaded

If you downloaded a cycle using a smart phone, it will be placed in the Download cycle position. Choose the Downloaded cycle to run the Downloaded cycle.

NOTE: The default cycle for this position is Small Load, used for normally soiled loads with just a few items. The Small Load cycle is also available to download.

HOW TO USE 23

CYCLE MODIFIER BUTTONS

Each cycle has default settings that are selected automatically. You may also customize these settings using the cycle modifier buttons. Press the button for the desired modifier until the indicator light for the desired setting is lit. The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency. Due to the high-efficiency nature of this

Temp.

Temp. selects the wash and temperature combination for the selected cycle. Press the Temp. button until the indicator light for the desired setting is lit. All rinses use tap cold water.

yy Select the water temperature suitable for the type of load you are washing. Follow the garment fabric care labels for best results.

product, water levels may be much lower than expected. This is normal and cleaning/rinsing performance will not be compromised.

NOTE: To protect your garments, not every wash/ temperature, spin speed, soil level, or option is available with every cycle. A chime will sound and the LED will not light if a selection is not allowed.

Soil

Adjusting the soil level setting will modify the cycle times and/or wash actions. Press the Soil button until the desired soil level is selected.

NOTE: This feature needs more time for heavily soiled loads or less time for lightly soiled loads.

Spin

Higher spin speeds extract more water from clothes, reducing drying time and saving energy.

Press the Spin button until the desired speed is selected. Some fabrics, such as delicates, require a slower spin speed. To protect your clothing, not all spin speeds are available for all cycles.

Other Use

Pressing the Other Use button will allow you to select additional features, such as Soak, Stain Care, Spin Only Rinse+Spin and Add Garment. Pressing the Other Use button before selecting a cycle will automatically default to the Normal cycle with the Soak feature selected.

<![if ! IE]>

<![endif]>ENGLISH

24 HOW TO USE

OTHER USE

After selecting a cycle, press the Other use button to select additional features for your load.

NOTE:

yy To protect your garments, not every feature is available with every cycle.

yy If the START/PAUSE button is not pressed within 60 minutes to start the cycle, the control will shut off and all settings will be lost.

RINSE + SPIN

Select this option to rinse and spin a load separately from a regular cycle. This can be helpful in preventing fresh stains from setting in fabrics. You can change the spin speed by pressing the SPIN SPEED button.

1.Press the POWER button to turn on the washer.

2.Press the Other Use button until the Rinse+Spin indicator light is lit. (The cycle light will turn off.)

3.Press the START/PAUSE button to start the cycle.

SOAK

This option provides 30-minutes presoak prior to the start of the selected cycle. Use the SOAK option to presoak garments to help remove difficult spots or stains on fabrics. At the end of the presoak time, the selected cycle will begin with the same water used for the soak.

NOTE: You cannot select the SOAK option in the TUB CLEAN, WATERPROOF, and ALLERGIENE™ cycles or with the STEAM option selected.

Stain Care

Use this option for heavily soiled loads that need improved stain treatment. When Stain Care is selected, the wash cycle will begin with warm water to help prevent the setting of certain types of stains. Then, as the cycle progresses, hot water will be added to gradually increase the water temperature to help remove stains that require treatment at higher temperatures.

NOTE:

yy Best results are obtained with smaller loads (less than 6 lbs(2,8 kg))

yy If you select STAIN CARE, the COLDWASH option is not available.

SPIN ONLY

Use this option to drain the water from the tub and spin out the clothes. This can be used, for example, if the wash cycle is interrupted by a power failure. The spin speed can be adjusted by using the SPIN SPEED button.

1.Press the POWER button to turn on the washer.

2.Press the Other Use button repeatedly until Spin Only is selected.

3.Press the Spin button to select the desired spin speed. Selecting NO SPIN and EXTRA HIGH are not allowed.

4.Press the START/PAUSE button.

SPECIAL DRAIN FEATURE

This washer is equipped with a special feature that is designed to make your washer as safe as possible. If the washer is paused or shut off while there is still water in the tub, the water will drain automatically after several minutes of inactivity. This helps keep children safe by reducing the possibility of water remaining in the tub.

Any water remaining in the tub will automatically drain 4 minutes after the washer has shut off. If the washer is paused and the START/PAUSE button is not pressed within 60 minutes, the washer will shut off and all cycle settings will be lost. And any water remaining in the tub will be drained.

The washer can be turned on or restarted any time before the drain begins. However, once the washer begins to drain, all controls and functions will be disabled until the water has been completely drained and the washer shuts off.