<![endif]>FRANÇAIS ENGLISH
OWNER’S MANUAL
WASHING
MACHINE
Please read this owner's manual thoroughly before operating and keep it handy for reference at all times.
WT1901C*
www.lg.com
MFL69884302
Ver.011417.01 Copyright © 2017 LG Electronics Inc. AII Rights Reserved.
2 TABLE OF CONTENTS
TABLE OF CONTENTS
3 |
IMPORTANT SAFETY INSTRUCTIONS |
27 |
MAINTENANCE |
|||
3 |
Basic Safety Precautions |
|
27 |
Regular Cleaning |
||
4 |
Grounding Requirements |
|
|
27 |
Cleaning the Exterior |
|
5 |
Safety Instructions for Installation |
|
|
27 |
Care and Cleaning of the Interior |
|
6 |
Safety Instructions for Use, Care, Cleaning and |
|
|
27 |
Tub Clean Cycle |
|
|
Disposal |
|
|
27 |
Removing Mineral Buildup |
|
|
|
|
|
27 |
Leave the Lid Open |
|
7 |
FEATURES AND BENEFITS |
|
|
28 |
Cleaning the Dispenser Drawer |
|
|
|
28 |
Proper Use of Detergent |
|||
7 |
Key Parts and Components |
|||||
29 |
Cleaning the Water Inlet Filters |
|||||
7 |
Included Accessory |
|||||
29 |
Storage, Moving, and Vacations |
|||||
7 |
Required Accessory |
|||||
|
|
|
|
8 INSTALLATION INSTRUCTIONS
8Choose the Proper Location
8Power Outlet
8Flooring
9Unpacking and Removing Shipping Material 10 Connecting the Water Lines
11 Connecting the Drain Hose
12 Leveling the Washer
13 Connect to the Power Supply
13 Sorting Wash Loads
15 About the Dispensers
15 Detergent and Dispenser Use
17 HOW TO USE
17Control Panel Features
18Time and Status Display
19Operating the Washer 20 Cycle Guide
22 Wash Cycles
23 Cycle Modifier Buttons
24 Other Use Features
25 Option Buttons
25 Cold Wash
25 Delay Wash
25 Turbo Wash
25 Extra Rinse
25 Water Plus
25 Signal
25 Control Lock
26 Add Garments
30 SMART FUNCTIONS
30Application Installation
30Using the Wi-Fi Function
31Open Source Software Notice
31FCC Notice
32Industry Canada Statement
33 SPECIFICATIONS
33SMART DIAGNOSIS™ SYSTEM
34TROUBLESHOOTING
34 Normal Sounds You May Hear
34 Before Calling for Service
38 Error Codes
40 WARRANTY
IMPORTANT SAFETY INSTRUCTIONS |
3 |
IMPORTANT SAFETY INSTRUCTIONS
SAFETY MESSAGES
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death. Your safety and the safety of others is very important. There are many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death.
All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION. These words mean:
DANGER You will be killed or seriously injured if you don’t immediately follow instructions.
WARNING You can be killed or seriously injured if you don’t follow instructions.
CAUTION |
You may be slightly injured or cause damage to the product if you do not follow |
instructions. |
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
BASIC SAFETY PRECAUTIONS
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.
yy Use this appliance only for its intended purpose as described in this Owner's Manual. yy Before use, the washer must be properly installed as described in this manual.
yy Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.
yy Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.
yy Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
yy Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. A child might become trapped inside the washer and suffocate.
yy Before the washer is removed from service or discarded, remove the lid to prevent children from climbing inside.
yy Do not install or store the washer where it will be exposed to the weather or freezing temperatures. yy Do not tamper with controls.
yy Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags, etc.), gasoline, chemicals and other flammable vapors and liquids.
yy Service must be performed by a qualified service technician. Do not disassemble the washer. yy See Installation Instructions for grounding requirements.
yy WARNING : This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
<![endif]>ENGLISH
4 IMPORTANT SAFETY INSTRUCTIONS
yy ALWAYS follow the fabric care instructions supplied by the garment manufacturer.
yy Do not place items exposed to cooking oil in your washer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.
yy Use fabric softeners or products to eliminate static only as recommended by the manufacturer.
yy This washer is not designed for maritime use or for mobile installations such as in RVs, aircraft, etc.
yy Turn off the water faucets and unplug the washer if the machine is to be left for an extended period of time, such as during vacations.
yy Do not use to dry articles containing foam rubber or similarly textured rubber-like materials.
yy Packaging material can be dangerous for children. There is a risk of suffocation! Keep all packaging from children.
yy Always check the inside of the washer for foreign objects before loading laundry. Keep the lid closed when not in use.
yy Do not reach into the appliance if the tub or agitator is moving.
yy In the event of a gas leak(such as propane gas, LP gas, etc.), ventilate the area immediately. Do not turn any appliance or light on or off. Do not use a ventilating fan. A spark may result in an explosion or fire.
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion or electric shock, or to prevent property damage, injury to persons, or death.
GROUNDING REQUIREMENTS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING
Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.
IMPORTANT SAFETY INSTRUCTIONS |
5 |
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
WARNING
To reduce the risk of fire, electric shock or injury to persons when using this appliance, follow basic precautions, including the following:
yy Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures. Installation instructions are packed with the washer for installer’s reference. If the washer is moved to a new location, have it checked and reinstalled by a qualified service technician. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy For personal safety, this appliance must be properly grounded. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock from this appliance.
yy This washer must be plugged into a 120 VAC, 60 Hz grounded outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy Do not install on carpet. Install washer on a solid floor. Failure to follow this warning can cause serious leak damage.
yy Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet.
Failure to follow these warnings can cause serious injury, fire, electric shock, or death.
yy The washer should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.
yy Never unplug your washer by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy Repair or immediately replace all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy When installing or moving the washer, be careful not to pinch, crush, or damage the power cord. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy The washer must be installed and electrically grounded by a qualified service person in accordance with local codes to prevent shock hazard and assure stability during operation.
yy The washer is heavy. Two or more people may be needed to install and move the appliance. Failure to do so can result in back or other injury.
yy Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to follow this warning can cause serious leak damage.
yy To reduce the risk of electric shock, do not install the washer in humid spaces. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety warnings in this manual could result in property damage, injury to persons or death.
yy Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
yy To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning.
yy Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor. If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire.
<![endif]>ENGLISH
6 IMPORTANT SAFETY INSTRUCTIONS
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING AND DISPOSAL
WARNING
To reduce the risk of fire, electric shock or injury to persons when using this appliance, follow basic precautions, including the following:
yy Unplug the washer before cleaning to avoid the risk of electric shock.
yy Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.
yy Do not put oily or greasy rags or clothing on top of the washer. These substances give off vapors that could ignite the materials.
yy Do not wash items that are soiled with vegetable or cooking oil. These items may contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.
yy Disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy Do not combine laundry products for use in one load unless specified on the label.
yy Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow package directions when using laundry products. Incorrect usage can produce poisonous gas, resulting in serious injury or death.
yy Do not reach into the washer while parts are moving. Before loading, unloading, or adding items, press the START/PAUSE button and allow the drum to coast to a complete stop before reaching inside. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. As children grow, teach them the proper, safe use of all appliances. Failure to comply with these warnings could result in serious injury to persons or death.
yy Destroy the carton, plastic bag, and other packing materials after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers. Failure to comply with these warnings could result in serious injury to persons or death.
yy Keep laundry products out of children’s reach. To prevent injury to persons, observe all warnings on product labels. Failure to comply with these warnings could result in serious injury to persons or death.
yy Remove the lid to the washing compartment before your washer is removed from service or discarded to avoid the danger of children or small animals getting trapped inside. Failure to do so can result in serious injury to persons or death.
yy Keep hands and foreign objects clear of the lid and latch area when closing the lid. Failure to keep hands clear can result in personal injury.
yy Do not touch the power plug with wet hands. This may result in electric shock.
yy Do not touch the water draining from the machine during a high-temperature wash or drying cycle. This water is hot, and touching it may result in burns or injury.
yy Do not stand on top of the appliance or place objects(such an laundry, lighted candles,lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance. This may result in electric shock, fire, problems with the product, or injury.
yy Do not install or store the washer where it will be exposed to freezing temperatures. Water may freeze in the hoses and damage the washer. Winterize the washer before storing or moving it in freezing temperatures. Refer to the Maintenance section for instructions.
yy Do not push the Lid too hard. There is a risk of breaking Lid Glass.
SAVE THESE INSTRUCTIONS
FEATURES AND BENEFITS
KEY PARTS AND COMPONENTS
A |
INVERTER DIRECT DRIVE MOTOR |
|
The inverter motor directly connected to |
|
the tub produces less noise and vibration |
|
while offering outstanding durability with a |
|
longer lifespan. |
B |
ULTRA CAPACITY & NEVERUST™ |
|
STAINLESS STEEL TUB |
|
The efficient design provides you with ultra |
|
large capacity. |
C |
TURBO WASH™ |
|
Turbo Wash™ reduces wash time without |
|
compromising performance. The precise |
|
drum movements and powerful water jets |
|
allow for faster soaking, while the Smart |
|
Rinse™ Jet Spray allows for quicker rins- |
|
ing, saving you up to 20 minutes per load |
|
without sacrificing washing performance. |
D |
OXI SANITIZE™ |
|
This cycle combines the cleaning perfor- |
|
mance of the LG washer with oxi-cleaning |
|
products, which are released at just the right |
|
time to deliver sanitary cycle performance |
|
without the excess energy wasted on hot |
|
water in typical sanitary cycles. It was certi- |
|
fied by an independent, third-party testing |
|
and certification organization. |
E |
FRONT CONTROL TOUCH PANEL |
|
The front control touch panel is specially |
|
designed to be water resistant with LG’s |
|
HydroShield™ technology, while also deliv- |
|
ering ergonomic efficiency by eliminating |
|
the need to have to reach for controls as |
|
with traditional rear-control units. In addi- |
|
tion, the soft touch buttons also add a pre- |
|
mium feel. |
F |
SLAM PROOF™LID |
|
The Slam Proof™ lid is a safety device that |
|
closes the lid slowly. The Slam Proof™ |
|
hinges allow the lid to close gently and qui- |
|
etly, helping prevent injuries. |
G |
SMART DIAGNOSIS™ |
|
If you ever experience an issue with your |
|
LG washer, you don’t have to worry. The |
|
SmartDiagnosis™ feature helps the ser- |
|
vice center diagnose problems over the |
|
phone, or with a simple app on your smart |
|
phone, helping you minimize costly, incon- |
|
venient service calls. |
FEATURES AND BENEFITS |
7 |
|
|
|
|
Dispenser box |
<![if ! IE]> <![endif]>ENGLISH |
|
|
(See page 15) |
|
|
Lid |
Bleach |
|
box |
|
|
Control panel |
Tub |
(See page 17) |
Leveling feet
Hot Water |
Cold Water |
Inlet valve |
Inlet valve |
Power
Cord
Drain
Hose
INCLUDED ACCESSORY
yy Tie Strap (for securing drain hose)
REQUIRED ACCESSORY (sold separately)
|
• Required accessory is sold |
|
separately. It can be ordered |
|
through LG Website. |
Hot/cold water hoses |
US: www.lg.com/us |
Part Number |
|
•5215FD3715U : Hot water hose
•5215FD3715V : Cold water hose
8 INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
CHOOSE THE PROPER LOCATION
WARNING
yy The washer is heavy. Two or more people are required when moving and unpacking the washer. Failure to do so may result in damage to property or serious bodily harm.
yy Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy Properly ground the washer to conform with all electric governing codes and ordinances.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy To reduce the risk of electric shock, do not install the washer in humid spaces. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
yy To ensure proper air flow, do not block the large opening on the bottom of the washer with carpeting or other materials.
yy Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
POWER OUTLET
yy The power outlet must be within 60 in. (1.5 m) of either side of the washer.
yy The appliance and outlet must be positioned so that the plug is easily accessible.
yy Do not overload the outlet with more than one appliance.
yy The outlet must be grounded in accordance with current wiring electric codes and regulations.
yy Time-delay fuse or circuit breaker is recommended.
NOTE: It is the personal responsibility and obligation of the product owner to have a proper outlet installed by a qualified service technician.
FLOORING
yy To minimize noise and vibration, the washer MUST be installed on a solidly constructed floor.
yy Allowable slope under the entire washer is a maximum 1 inch. difference from side to side or from front to back.
yy Installing on carpeting and soft tile surfaces is not recommended.
yy Never install the washer on a platform or weakly supported structure.
NOTE: The washer must be installed on firm flooring to minimize vibration during the spin cycle. Concrete flooring is best, but a wood floor is sufficient, provided it is built to FHA standards. The washer should not be installed on rugs or exposed to weather.
|
|
40 3/8” |
|
|
|
(102.6 cm) |
|
1” |
27” |
1” |
|
(2.5cm) |
(2.5cm) |
||
(68.6 cm) |
|||
|
|
To ensure sufficient clearance for water lines and airflow, allow minimum clearances of at least 1 in. (2.5 cm) at the sides and 4 in. (10 cm) behind the unit. Be sure to allow for wall, door, or floor moldings that may increase the required clearances.
32 ”
(81.1 cm)
28 3/8”
(72.1 cm)
3 1/2” (9 cm)
55 3/8”
(140.6 cm) (with open lid)
26 3/4”
(68 cm)
Minimum vertical space from floor to overhead shelves, cabinets, ceilings, etc., is 56 in.
INSTALLATION INSTRUCTIONS |
9 |
UNPACKING AND REMOVING SHIPPING MATERIAL
1.After removing the carton and shipping material, lift the washer off the foam base. Make sure the plastic tub support comes off with the base and is not stuck to the bottom of the washer.
3.Carefully remove the two foam pads which cover the top sides of the tub guide, making sure not to leave behind any pieces of the foam.
Pad
4.Unfasten the power cord from the back of the washer.
If you must lay the washer down to remove the base packaging materials, always protect the side of the washer and lay it carefully on its side. DO NOT lay the washer on its front or back.
Plastic Tub Support
Carton Base
2.Save the foam block (that contains the Owner’s Manual, parts and laundry product samples) for future use. If the washer must be moved in the future, the foam block will help prevent damage to the washer during transportation.
NOTE: To prevent damage, do not remove the foam block until the washer is at the final location.
TOOLS YOU WILL NEED
yy Adjustable Pliers
yy Carpenter's Level
<![endif]>ENGLISH
10 INSTALLATION INSTRUCTIONS
CONNECTING THE WATER LINES
yy LG recommends the use of LG hoses. Any leaking, property damage, or damage to the washing machine caused by an improper installation or by the use of non-LG hoses is not covered under the terms of the LG warranty and is the sole responsibility of the customer and/or an installer.
yy Water supply pressure must be between 20 psi and 120 psi (138~827 kPa). If the water supply pressure is more than 120 psi, a pressure reducing valve must be installed.
yy Periodically check the hose for cracks, leaks, and wear, and replace the hose if necessary.
yy Make sure that the water lines are not stretched, pinched, crushed, or kinked.
yy The washer should never be installed or stored in a location subject to freezing temperatures. Damage to the water lines and internal mechanisms of the washer can result. If the washer was exposed to freezing temperatures prior to installation, allow it to stand at room temperature for several hours before use and check for leaks prior to operation.
NOTE: Do not use flood-preventing hoses with auto shutoff devices. The devices can be tripped during fill and prevent the machine from filling properly.
Rubber Seal |
Rubber Seal |
Water Hose |
|
(to water inlet |
Water Hose |
on washer) |
(to tap) |
1.Inspect the threaded fitting on each hose and make sure there is a rubber seal in place in both ends of each hose.
2.Connect the water supply hoses to the HOT and COLD water faucets tightly by hand and then tighten another 2/3 turn with pliers.
WARNING
yyDo not overtighten. Damage to the coupling can result.
3.Always run a gallon or two of water through each inlet hose to flush dirt, scale and other debris out of the water lines. Doing so will help prevent future problems with clogged filter screens, and will also allow you to verify which water line is hot and which is cold.
Hot water inlet Cold water inlet
Water Faucet
WARNING
yyDo not reuse old hoses. Only use new hoses when you install the washing machine. Old hoses could leak or burst causing flooding and property damage.
WARNING
yyDo not overtighten the hoses. Overtightening can damage the valves resulting in leaking and property damage.
4.Attach the hot water line to the hot water inlet on the back of the washer. Attach the cold water line to the cold water inlet on the back of the washer. Tighten the fittings securely. Turn ON both faucets all the way and check for leaks at both ends of the hoses.
NOTE: Be careful not to cross-thread the hose fittings. This will damage the valve and could result in property damage from leaks.
INSTALLATION INSTRUCTIONS |
11 |
CONNECTING THE DRAIN HOSE
yy The drain hose should always be properly secured. Failure to properly secure the drain hose can result in flooding and property damage.
yy The drain must be installed in accordance with any applicable local codes and regulations.
yy Make sure that the drain hose is not stretched, pinched, crushed, or kinked.
Drain Hose
CAUTION
yy Do not insert the end of the drain hose into the standpipe more than 8 inches (20cm). Doing so can cause siphoning, odors, or improper draining.
8”(20 cm) |
No more than 8 inches (20cm) |
Tie Strap
OPTION 2: LAUNDRY TUB
Bend the end of the drain hose to the desired shape and support it on the edge of the laundry tub. Use the tie strap to secure the drain hose in place.
OPTION 1: STANDPIPE
Bend the outlet end of the drain hose to form a U shape. Insert the end of the drain hose into the drain. If the drain is large enough for the flange on the hose to fit inside, then do not insert the flange more than 1-2 inches into the drain. Use the tie strap included with the installation materials in the foam block in the tub to secure the drain hose to the drain.
If the water valves and drain are built into the wall,
39”
39” (99 cm) (99 cm)
Tie Strap |
Tie Strap |
fasten the drain hose to one of the water hoses with the tie strap (ribbed side on inside).
If your drain is a standpipe, fasten the drain hose to the standpipe with the tie strap provided.
NOTE:
yy Normal height of the end of the hose should be approximately 35”~47” (0.9~1.2 m) from the floor.
yy Do not install the end of the drain hose lower than 29 in. (73.7 cm) or higher than 96 in. (243.8 cm) above the bottom of the washer or more than 60 in. (152.4 cm) away from the washer.
yy Never create an airtight seal between the hose and the drain with tape or other means. If no air gap is present, water can be siphoned out of the tub resulting in poor wash/rinse performance or clothing damage.
Drain Hose
NOTE:
yy Do not use this drain hose with a floor drain. The end of the drain hose must be at least 29 inches above the floor for proper draining to occur.
<![endif]>ENGLISH
12 INSTALLATION INSTRUCTIONS
LEVELING THE WASHER
The tub of your new washer spins at very high speeds. To minimize vibration, noise, and movement, the floor must be a level, solid surface.
NOTE:
•Adjust the leveling feet only as far as necessary to level the washer. Extending the leveling feet more than necessary can cause the washer to vibrate.
•Before installing the washer, make sure that the floor is clean, dry and free of dust, dirt, water and oil so the washer feet cannot slide easily. Leveling feet that move or slide on the floor can contribute to excessive vibration and noise due to poor contact with the floor.
All four leveling feet must rest solidly on the floor. Attempt to rock the washer from corner to corner to make sure that all four leveling feet are in firm contact with the floor.
1.Position the washer in its final location, taking special care not to pinch, strain, or crush the water and drain lines. Place a level across the top of the washer.
Raise |
Lower |
2.Adjust the leveling feet. Turn clockwise to raise the washer or counterclockwise to lower it.
3.To make sure that the washer is properly level, open the lid and look from above to see if the tub is centered. If the tub is NOT centered (as shown in the drawing with the X through it), readjust the front feet. If you have a level, check your washer with the level.
yy To check if the washer is level from side to side, place a level on the back edge of the lid.
yy To check if the washer is level front to back, place a level at the side of the washer on the edge where
the cabinet side meets the top cover. Do not place the level on the top of the lid. Using these surfaces will result in the washer being unlevel.
Side to Side
Front to Back
Lower Raise
WARNING
yyUsing the washing machine without leveling it may result in malfunction caused by the production of excess vibration and noise.
yyUse the leveling feet only when you level the washing machine. If you raise the leveling feet unnecessarily, it may cause abnormal vibration of the washing machine.
NOTE:
•If the lid will not stay open, the washer may need to be leveled. Extend the front leveling legs until the washer is level.
INSTALLATION INSTRUCTIONS 13
CONNECT TO THE POWER SUPPLY SORTING WASH LOADS
The washer should be plugged into a 120-VAC, 60Hz grounded 3-prong outlet. Plug in the washer. Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service technician
if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electrical shock, or death.
WARNING
yyThe power outlet must be within 60 inches (1.5 m) of either side of the washer.
yyThe appliance and outlet must be positioned so that the plug is easily accessible.
yyDo not overload the outlet with more than one appliance.
yyThe outlet must be grounded in accordance with current wiring codes and regulations.
yyTime-delay fuse or circuit breaker is recommended.
yyIt is the personal responsibility and obligation of the product owner to have a proper outlet installed by a qualified electrician.
yyDo not use a worn or damaged power cord or power plug. Replace or repair it immediately.
Failure to do so may result in death, fire, electric shock, or malfunction.
yyDo not modify the power cord and take care not to damage it when installing or moving the washing machine. Failure to do so may result in death, fire, electric shock, or malfunction.
yyMake sure that the washing machine is grounded.
yyConnect this washing machine to a grounded outlet conforming to the rating prior to use.
Failure to do so may result in fire, electric shock, or malfunction.
yyDo not use adaptors or extension cords. The washing machine should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. Failure to do so may result in fire, electric shock or disorder.
yyDo not damage or cut off the ground prong of the power cord. Doing so may cause death, fire, electric shock, or product malfunction.
CAUTION
yy Do not load items higher than the top edge of the tub. Failure to follow this caution can result in leakage or damage to fabrics.
yy Use the Bedding cycle for buoyant or nonabsorbent items such as pillows or comforters. Failure to follow this caution can result in leakage.
yy If possible, do not wash any water-resistant items. If you must, please select the Waterproof cycle.
( i.e. Water resistant clothing, mattress covers, outdoor clothes, plastic mats etc.)
yy If waterproof material laundry is washed in a course other than Waterproof, it may result in injury or damage to the washer, clothes, walls, floor, and surrounding objects due to abnormal vibration.
GROUPING SIMILAR ITEMS
For the best washing results, and to reduce the possibility of damage to clothing, care should be taken to sort the clothing into loads that are made up of similar items.
Mixing different fabric types and/or soil levels can result in poor wash performance, color transfer, discoloration, fabric damage or linting. Fabrics should be sorted into groups as described below.
COLORS
Sort articles by color. Wash dark clothes together in a separate load from light colors or whites. Mixing dark clothes with light clothes can result in dye transfer or discoloration of the lighter clothes.
SOIL LEVEL
Wash heavily soiled clothing together. Washing lightly soiled clothing in the same load with heavily soiled clothing could result in poor wash performance for the lightly soiled clothing.
FABRIC TYPE
Delicate articles should not be mixed with heavier or sturdier fabric types. Washing heavier fabrics in a delicate load can result in poor wash performance for the heavier fabrics and possible damage to the delicates.
LINT TYPE
Some fabrics attract and bind lint to them while others give off lint in the laundry process. Avoid mixing these lint collectors and lint producers in the same load. Mixing these fabrics will result in pilling and linting on the lint collectors. (For example, lint collector – knit sweater; lint producer – terry cloth towels.)
SORT LAUNDRY…
By Colors |
By Soil |
By Fabric |
By Lint |
White |
Heavy |
Delicates |
Lint Producer |
Lights |
Normal |
Easy Care |
Line Collector |
Darks |
Light |
Sturdy |
|
<![endif]>ENGLISH
14 INSTALLATION INSTRUCTIONS
FABRIC CARE LABELS
Many articles of clothing include a fabric care label. Using the chart below, adjust the cycle and option selections to care for your clothing according to the manufacturer’s recommendations.
Fabric Care Labels
NOTE: Use the Bedding cycle for large or bulky items such as poly-filled jackets, comforters, pillows, etc. These items may not be as absorbent as other laundry items and should be sorted into a separate wash load for optimal results.
Bulky items should be placed as far down in the tub as possible for optimal results. Always place buoyant items at the bottom of the tub. The washer will automatically detect the load size. Because of the highefficiency wash system, the water level may not completely cover the load.
1. For best performance, load clothes as shown.
Do this |
Not this |
LOADING THE WASHER
yy Check all pockets to make sure that they are empty. Items such as clips, matches, pens, coins, and keys can damage both your washer and your clothes.
yy Close zippers, hooks, and drawstrings to prevent these items from snagging or tangling on other clothes.
yy Pretreat heavily stained areas for best results.
yy Combine large and small items in a load. Load large items first.
yy Large items should not be more than half of the total wash load.
yy The washer can be fully loaded, but the tub should not be tightly packed with items. The lid of the washer should close easily.
yy To prevent an out-of-balance load, do not wash single items. Add one or two similar items to the load. Large, bulky items, such as a blanket, comforter, or bedspread, should be washed individually.
yy Waterproof items do wash or spin Waterproof cycle. (i.e. Water resistant clothing, mattress covers, outdoor clothes, plastic mats etc.)
yy The washer will not fill or operate with the lid open.
2.Load clothes loosely, and do not load clothes over the maximum guideline on the tub. Clothes need room to circulate in order to get clean.
Maximum guide line
INSTALLATION INSTRUCTIONS 15
ABOUT THE DISPENSERS
The automatic dispenser consists of two compartments which hold:
yy Liquid fabric softener.
yy Liquid or powdered detergent for the main wash.
Main Wash |
Main Wash |
Powdered Detergent |
Liquid Detergent |
Compartment |
Compartment |
Liquid Fabric |
|
Softener |
|
Compartment |
|
|
Insert |
Dispenser Drawer
MAIN WASH DETERGENT COMPARTMENT
This compartment holds laundry detergent for the main wash cycle. The detergent is added to the load at the beginning of the cycle. Always use High-Effi- ciency (HE) detergent with your washing machine. Either powdered or liquid detergent may be used.
Never exceed the manufacturer’s recommendations when adding detergent. Using too much detergent can result in detergent buildup in clothing and the washer.
When using liquid detergent, make sure the liquid detergent cup and insert are in place. Do not exceed the maximum fill line.
When using powdered detergent, remove the liquid detergent cup from the compartment. Powdered detergent will not dispense with the liquid detergent cup in place.
Liquid Bleach
Compartment
LIQUID BLEACH COMPARTMENT
The bleach dispenser is a separate compartment at the left front of the tub opening. This compartment holds liquid bleach, which is dispensed automatically at the proper time during the wash cycle. Any liquid remaining in the dispenser at the end of the cycle is water, not bleach.
yy Do not add powdered bleach to this compartment. The bleach compartment is designed to dispense liquid bleach only. Powdered or liquid color-safe bleach will not dispense properly.
yy Always follow the manufacturer’s recommendations when adding bleach. Never add more than one cup and do not exceed the maximum fill line since this can cause the bleach to be dispensed immediately, resulting in damage to fabrics. Using too much bleach can damage fabrics.
yy Never pour undiluted liquid chlorine bleach directly onto the load or into the tub. Fabric damage can occur.
yy Do not use color-safe bleach or Oxi products in the same cycle with liquid chlorine bleach.
DANGER
Do NOT mix chlorine bleach with ammonia or acids, such as vinegar or rust/scale remover. Mixing chemicals like these can produce a lethal gas, resulting in severe injury or death.
FABRIC SOFTENER COMPARTMENT
This compartment holds liquid fabric softener, which is automatically dispensed during the final rinse cycle.
Never exceed the manufacturer’s recommendations when adding softener. Using too much fabric softener can result in damage to clothing and the washer. Either powdered or liquid fabric softener.
yy Always follow the manufacturer’s recommendations when adding fabric softener. Do not exceed the maximum fill line. Using too much fabric softener may stain clothes.
yy Dilute concentrated fabric softeners with warm water. Do not exceed the maximum fill line.
yyNever pour fabric softener directly onto the load or into the tub.
DETERGENT AND DISPENSER USE
A WORD ABOUT DETERGENTS
High-Efficiency (HE) detergents produce fewer suds, dissolve more efficiently to improve washing and rinsing performance, and help to keep the interior of your washer clean. Using detergent that is not HE may cause oversudsing and unsatisfactory performance which could result in error codes, cycle failure, and machine damage.
|
Maximum |
|
Normal Load Amount |
Liquid |
Powder |
Detergent |
Detergent |
<![endif]>ENGLISH
16 INSTALLATION INSTRUCTIONS
For proper wash performance, always measure the detergent using the measuring device provided by the detergent manufacturer.
The normal amount of HE detergent needed, for average loads, is less than ½ of the recommended maximum. Use less detergent for soft water, light soil or smaller loads. Never use more than the maximum amount recommended by the detergent manufacturer.
DESIGNED TO USE ONLY
HIGH-EFFICIENCY (HE)
DETERGENT
IMPORTANT: Your washing machine is designed for use with only High-Efficiency (HE) detergents. HE detergents are formulated specifically for High-Effi- ciency washers and contain suds-reducing agents. Always look for the HE symbol when purchasing detergent.
IMPORTANT: Not all detergents are the same. Pay careful attention to the amount of detergent used to avoid oversudsing, poor rinsing and detergent buildup in clothing, and residue buildup that can contribute to odors in the machine. NEVER use a cup or scoop other than the one supplied by the manufacturer of the detergent you are using. Never use more than the maximum amount of detergent recommended by the manufacturer. A full scoop or measure of detergent should only be used for very large and heavily soiled loads. Using too much detergent can result in detergent buildup in the washer and in your clothes.
Always measure the detergent amount. While HE detergents are designed for this type of washing machine, be careful when measuring the detergent. For most normal loads, no more than 1/4 to 1/2 a cap or scoop of HE detergent should be used.
NOTE:
yy Extra care must be exercised when using 2X and 3X concentrated detergents because even a little bit extra can contribute to the problems mentioned above. yy Detergents designated as HE compatible may not
provide optimal results.
USING THE SOFTENER AND DETERGENT DISPENSER
To add detergent, and fabric softener to the automatic dispenser:
1.Open the dispenser drawer.
2.Load the laundry products into the appropriate compartments.
3.Close the drawer before starting the cycle.
4.If using fabric softener on NORMAL or HEAVY DUTY cycles, press the FABRIC SOFTENER button or select the EXTRA RINSE option.
NOTE: It is normal for a small amount of water to remain in the bleach dispenser and softener compartment at the end of the cycle.
IMPORTANT: Do not place or store laundry products, such as detergent, bleach, or liquid fabric softener, on top of your washer or dryer. Wipe up any spills immediately. These products can damage the finish and controls.
USING THE LIQUID BLEACH DISPENSER
Bleach
The bleach dispenser automatically dilutes and dispenses liquid bleach at the proper time in the wash cycle.
1.Check clothing care labels for special instructions.
2.Measure liquid bleach carefully, following instructions on the bottle. High-efficiency washers use less water, so less bleach is needed. One half cup is enough for most loads.
3.Carefully pour the pre-measured amount of bleach directly into the bleach dispenser. If you are using powdered bleach of any kind, pour it directly into the tub before adding the laundry. Never add powdered bleach to the liquid bleach dispenser.
yy Never pour undiluted liquid chlorine bleach directly onto clothes or into the tub.
yy Do not pour powdered bleach into bleach dispenser. yy Do not place laundry items on top of the bleach dispenser when loading and unloading the washer.
yy Always measure and pour bleach carefully. Avoid overfilling or splashing when adding bleach to the dispenser. The maximum capacity of the bleach dispenser is one cup of bleach per wash cycle. Overfilling could result in bleach being dispensed immediately, which can result in damage to the clothes in the washer.
HOW TO USE 17
HOW TO USE
CONTROL PANEL FEATURES
E F A
<![endif]>ENGLISH
D
A POWER (ON/OFF) BUTTON
Press to turn the washer ON. Press again to turn the washer OFF. Pressing the POWER button during a cycle will cancel that cycle and any load settings will be lost. The lid will unlock after a brief pause.
NOTE: If there is any water remaining in the tub after the washer shuts off, it will drain following a five minute delay. The washer can be restarted any time before the drain begins. However, once the water begins to drain, all functions will be suspended until the water has been completely drained and the washer shuts off.
B CYCLE SELECTOR BUTTON
Press the Cycle Button repeatedly until the desired cycle is selected. Once the desired cycle has been selected, the standard presets will appear in the display. These settings can be adjusted using the cycle setting buttons anytime before starting the cycle.
NOTE: To protect your clothing, not all settings are available on all cycle selections.
B C
C START/PAUSE BUTTON
Press this button to start the selected cycle. If the washer is running, use this button to pause the cycle without losing the current settings.
NOTE: If you do not press the START/ PAUSE button within five minutes of selecting a cycle, the washer automatically turns OFF and all cycle settings are lost. Any water remaining in the tub will drain after a five minute delay.
D CYCLE MODIFIER BUTTONS
Use these buttons to adjust the settings for the selected cycle. The setting lights above the buttons illuminate to show the current selection.
E SPECIAL CYCLE AND OPTION BUTTONS
These buttons allow you to select special cycles or options.
F TIME AND STATUS DISPLAY
The display shows the cycle status and estimated time remaining.
18 HOW TO USE
TIME AND STATUS DISPLAY
The time and status display shows the estimated time remaining and cycle progress.
D
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A |
B |
C |
||||
A |
CYCLE STATUS INDICATOR |
|
C |
ESTIMATED TIME REMAINING |
||||
|
These LEDs will illuminate when a cycle |
|
|
When a cycle is selected, the default |
||||
|
is selected to indicate which stages will |
|
|
time for that cycle is displayed. This time |
||||
|
run. When a cycle is running, the LED for |
|
|
will change as modifiers or options are |
||||
|
the active stage will blink, and the LEDs |
|
|
selected. Once the START/PAUSE but- |
||||
|
for the remaining stages will remain |
|
|
ton is pressed, the washer will measure |
||||
|
steady. Once a stage is complete, the |
|
|
the size of the load. The estimated time |
||||
|
LED will turn off. If a cycle is paused, the |
|
|
may change once the load size has been |
||||
|
active stage LED will stop blinking. |
|
|
measured. If Delay Wash is set, the re- |
||||
B |
|
|
|
|
|
maining delay time counts down until the |
||
WI-FI CONNECT INDICATOR |
|
|
cycle begins. |
|||||
|
|
|
|
|
||||
|
The indicator blinks during product reg- |
|
|
NOTE: The time shown is only an esti- |
||||
|
istration and Wi-Fi setup and illuminates |
|
|
mate. This time is based on normal oper- |
||||
|
when the appliance is connected to a |
|
|
ating conditions. Several external factors |
||||
|
home Wi-Fi network. |
|
|
(load size, room temperature, incoming |
||||
|
|
|
|
|
|
water temperature, etc.) can affect the |
||
|
|
|
|
|
|
actual time. |
||
|
|
|
|
|
D |
LID LOCK INDICATOR |
||
|
|
|
|
|
|
The Lid lock indicator will illuminate once |
||
|
|
|
|
|
|
a cycle has started. The indicator light |
||
|
|
|
|
|
|
will stay on until the cycle is paused, |
||
|
|
|
|
|
|
stopped or has finished. |
HOW TO USE 19
OPERATING THE WASHER
|
1 |
SORT LAUNDRY AND LOAD THE WASHER |
|
|
Sort laundry by fabric type, soil level, color and |
|
|
load size, as needed. Open the lid and load items |
|
|
into the washer. |
Bleach |
2 |
CLEANING PRODUCTS |
Softener |
|
Add High-Efficiency (HE) detergent to the |
|
detergent dispenser. If bleach or fabric softener |
|
Detergent |
|
|
|
is to be used, add these to the appropriate |
|
|
|
dispensers. |
|
3 |
TURN ON THE WASHER |
|
|
Press the POWER button to turn ON the washer. |
|
|
The lights around the cycle selector knob will |
|
|
illuminate and a chime will sound. |
|
4 |
CYCLE SELECTOR BUTTON |
|
|
Press the Cycle Button repeatedly until the desired |
|
|
cycle is selected. The preset Wash Temp., Spin |
|
|
Speed, Soil Level, Special Use and option settings |
|
|
for that cycle will be shown. Pressing the Start |
|
|
Pause button without selecting a cycle will cause |
|
|
the NORMAL cycle to begin immediately. |
|
5 |
ADJUST SETTINGS |
|
|
Default settings for the selected cycle can now |
|
|
be changed, if desired, using the cycle modifier |
|
|
and option buttons. |
|
|
NOTE: Not all modifiers and options are available |
|
|
on all cycles. A different chime will sound and the |
|
|
LED will not come on if the selection is not allowed. |
|
6 |
BEGIN CYCLE |
|
|
Press and hold the START/PAUSE button to |
|
|
begin the cycle. The lid will lock, and the washer |
|
|
will agitate briefly without water to measure the |
|
|
weight of the load. If the START/PAUSE button |
|
|
is not pressed within 5 minutes, the washer will |
|
|
shut off and all settings will be lost. |
|
7 |
ADD GARMENTS LIGHT |
|
|
The Add Garments light will illuminate near the |
|
|
beginning of the wash cycle to indicate when |
|
|
it is safe to add items to the load. Press the |
|
|
START/PAUSE button to pause the cycle and add |
|
|
garments to the load. Press the START/PAUSE |
|
|
button to resume the cycle. |
|
|
NOTE: It is not recommended to add items |
|
|
unless the ADD GARMENTS light is illuminated, |
|
|
as this could result in poor performance and/or |
|
|
clothing damage. |
|
8 |
END OF CYCLE |
|
|
When the cycle is finished, a melody will sound. |
|
|
Immediately remove your clothing from the |
|
|
washer to reduce wrinkling. |
WARNING
yyTo reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this appliance.
<![endif]>ENGLISH
20 HOW TO USE
CYCLE GUIDE
The cycle guide below shows the default settings, available options |
|
|
|
|
|
|
||||||
and recommended fabric types for each cycle. Allowable modifier |
|
|
Default Setting |
|
|
|||||||
adjustments are shown below the default setting for each cycle. |
|
|
|
|
||||||||
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
||
Cycle |
Fabric or Load |
Wash Temp. |
Spin Speed |
Soil Level |
Soak |
Stain |
Cold |
Extra |
Water |
Turbo |
||
Type |
Care™ |
Wash™ |
Rinse |
Plus |
Wash™ |
|||||||
|
|
|
|
|
||||||||
Normal |
Cotton, linen, |
Hot |
Extra high |
Heavy |
|
|
|
|
|
|
|
|
|
towels, shirts, |
Warm |
High |
|
|
|
|
|
|
|
|
|
|
sheets, jeans, |
Semi Warm |
Medium |
Normal |
● |
● |
● |
● |
● |
● |
||
|
mixed loads |
Cold |
|
|
|
|
|
|
|
|
|
|
|
|
Tap cold |
No spin |
Light |
|
|
|
|
|
|
|
|
Heavy Duty |
Heavily soiled |
Hot |
Extra high |
Heavy |
|
|
|
|
|
|
|
|
|
cotton fabrics |
Warm |
High |
|
|
|
|
|
|
|
|
|
|
|
Semi Warm |
Medium |
Normal |
● |
● |
|
● |
● |
● |
||
|
|
Cold |
Low |
|
|
|
|
|
|
|
|
|
|
|
Tap cold |
No spin |
Light |
|
|
|
|
|
|
|
|
Bulky |
Large items |
Hot |
|
Heavy |
|
|
|
|
|
|
|
|
|
such as blan- |
|
|
|
|
|
|
|
|
|
|
|
|
Warm |
|
|
|
|
|
|
|
|
|
||
|
kets and com- |
|
Medium |
|
|
|
|
|
|
|
|
|
|
Semi Warm |
Normal |
● |
|
|
● |
● |
|
|
|||
|
forters |
Cold |
Low |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
Tap cold |
No spin |
Light |
|
|
|
|
|
|
|
|
|
* Use the BULKY |
cycle for |
items such as pillows, comforters, pet bedding and other articles which |
|||||||||
|
have difficultly absorbing water. DO NOT WASH EXCESSIVELY LARGE ITEMS. If large/bulky items |
|||||||||||
|
do not fit easily into the tub, there may not be enough room for them to move during washing. Keep |
|||||||||||
|
like items together; do not mix large bulky items with smaller clothing items. Failure to follow these |
|||||||||||
|
instructions may result in damage to the clothing or to the washer. |
|
|
|
|
|||||||
Bright |
White fabrics |
Hot |
Extra High |
Heavy |
|
|
|
|
|
|
|
|
Whites™ |
|
Warm |
High |
|
|
|
|
|
|
|
|
|
|
|
Semi Warm |
Medium |
Normal |
● |
|
|
|
● |
● |
● |
|
|
|
|
Low |
|
|
|
|
|
|
|
|
|
|
|
|
No Spin |
Light |
|
|
|
|
|
|
|
|
OXI |
Cotton, under- |
Hot |
Extra high |
Heavy |
|
|
|
|
|
|
|
|
SANITIZE™ |
wear, pillow |
|
High |
|
|
|
|
|
|
|
|
|
|
covers, bed |
|
Medium |
Normal |
|
|
|
|
● |
● |
● |
|
|
sheets, baby |
|
|
|
|
|
||||||
|
|
Low |
|
|
|
|
|
|
|
|
||
|
wear. (less |
|
|
|
|
|
|
|
|
|
||
|
than 11 lbs.) |
|
No spin |
Light |
|
|
|
|
|
|
|
|
Tub Clean |
Refer to page |
Hot |
High |
|
|
|
|
|
|
|
|
|
|
27. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Light |
|
|
|
|
|
|
|
HOW TO USE 21
CYCLE GUIDE
The cycle guide below shows the default settings, available options |
|
|
|
|
|
|
||||||
and recommended fabric types for each cycle. Allowable modifier |
|
|
Default Setting |
|
|
|||||||
adjustments are shown below the default setting for each cycle. |
|
|
|
|
||||||||
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
||
Cycle |
Fabric or Load |
Wash Temp. |
Spin Speed |
Soil Level |
Soak |
Stain |
Cold |
Extra |
Water |
Turbo |
||
Type |
Care™ |
Wash™ |
Rinse |
Plus |
Wash™ |
|||||||
|
|
|
|
|
||||||||
Pre Wash+ |
Towels, shirts, |
Hot |
Extra high |
|
|
|
|
|
|
|
|
|
Normal |
sheets, jeans, |
Warm |
High |
|
|
|
|
|
|
|
|
|
|
mixed loads |
|
|
|
|
|
|
|
|
|
|
|
|
Semi Warm |
Medium |
Normal |
● |
|
|
|
● |
● |
● |
||
|
|
|
|
|
||||||||
|
|
Cold |
Low |
|
|
|
|
|
|
|
|
|
|
|
Tap cold |
No spin |
Light |
|
|
|
|
|
|
|
|
Waterproof |
Waterproof or |
|
|
Heavy |
|
|
|
|
|
|
|
|
|
water resistant |
Warm |
|
|
|
|
|
|
|
|
|
|
|
items: mattress |
Semi Warm |
|
Normal |
|
|
|
|
|
|
|
|
|
covers, outdoor |
|
|
|
|
|
|
|
● |
● |
|
|
|
Cold |
Low |
|
|
|
|
|
|
||||
|
clothing, plastic |
|
|
|
|
|
|
|
|
|||
|
mats, etc. (less |
Tap cold |
No spin |
Light |
|
|
|
|
|
|
|
|
|
than 14 lb.) |
|
|
|
|
|
|
|
|
|
|
|
Delicates |
Dress shirts/ |
|
|
Heavy |
|
|
|
|
|
|
|
|
|
blouses, nylons, |
Warm |
|
|
|
|
|
|
|
|
|
|
|
sheer or lacy |
Semi Warm |
|
Normal |
● |
|
|
|
● |
● |
|
|
|
garments (less |
|
|
|
|
|
||||||
|
than 8 lbs.) |
Cold |
Low |
|
|
|
|
|
|
|
|
|
|
Tap cold |
No spin |
Light |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||||
Towels |
Towels, shirts, |
Hot |
Extra High |
Heavy |
|
|
|
|
|
|
|
|
|
sheets, jeans, |
|
|
|
|
|
|
|
|
|
|
|
|
Warm |
High |
|
|
|
|
|
|
|
|
||
|
mixed loads |
|
|
|
|
|
|
|
|
|||
|
Semi Warm |
Medium |
Normal |
● |
● |
● |
● |
● |
● |
|||
|
|
|||||||||||
|
|
Cold |
Low |
|
|
|
|
|
|
|
|
|
|
|
Tap cold |
No Spin |
Light |
|
|
|
|
|
|
|
|
Speed Wash |
Lightly soiled |
|
Extra high |
Heavy |
|
|
|
|
|
|
|
|
|
and small loads |
Warm |
High |
|
|
|
|
|
|
|
|
|
|
|
Semi Warm |
Medium |
Normal |
● |
|
|
|
● |
● |
● |
|
|
|
Cold |
Low |
|
|
|
|
|
|
|
|
|
|
|
Tap cold |
No spin |
Light |
|
|
|
|
|
|
|
Downloaded The downloaded cycle (See page 22.)
<![endif]>ENGLISH
22 HOW TO USE
WASH CYCLES
Wash cycles are designed for the best wash performance for each type of load. Select the cycle that best matches the load contents for maximum wash performance and fabric care. When you select a wash cycle, the light for the corresponding wash cycle will turn on. See page 19, OPERATING THE WASHER, for more details on operating methods.
Normal
Use this cycle to wash all normal items, except delicate fabrics such as wool or silk.
NOTE: Pressing the START/PAUSE button without selecting a cycle will cause the NORMAL cycle to begin immediately using the default settings.
Heavy Duty
This cycle is for washing heavily soiled laundry using more powerful wash motions.
NOTE: When washing large loads, in order to deliver the best performance, there will be brief periods of 2 minutes or more without agitation. These soak periods are part of the cycle's design, and are normal.
Bulky
This cycle is for washing blankets or bulky items.
NOTE: Do not use this cycle to wash a mixed load of bedding and non-bedding items.
Pre Wash+
Normal
Use this cycle to prewash stains without needing to hand-wash. Prompt treatment helps to prevent stains from setting or odors from developing.
Waterproof
This cycle is used for washing waterproof material.
NOTE:
yy Do not use any other wash cycle to wash waterproof fabrics. (i.e. Water resistant clothing, mattress covers, outdoor clothes, plastic mats etc.)
yy Do not use this cycle to wash a mixed load of waterproof and non-waterproof items.
yy Use only the waterproof cycle, after checking the washing instruction label on the fabric.
yy Do not wash other fabrics using the waterproof cycle.
WARNING
yy If waterproof material laundry is washed in a course other than Waterproof, it may result in injury or damage to the washer, clothes, walls, floor, and surrounding objects due to abnormal vibration.
Delicates
This cycle is for washing lingerie or sheer and lacy clothes which can easily be damaged.
BRIGHT WHITES™
This cycle is for washing white items only.
OXI SANITIZE™
This wash cycle reduces 99.9% of bacteria on laundry when used in conjunction with bleach without high energy consumption.
NOTE:
yy Follow the product manufacturer’s instructions for using Oxi products with this cycle.
yy Never load powdered products into the liquid bleach dispenser. Doing so can result in the product not being dispensed or being dispensed incorrectly. Powders can clog the bleach dispenser, resulting in leaks or damage to the washer or your clothing.
TUB CLEAN
Use this cycle to clean the tub of your washing machine.
Speed Wash
Use the Speed Wash cycle to quickly wash lightly soiled clothing and small loads. For high wash and rinse efficiency, washing small loads of 2-3 lightly soiled garments is recommended.
NOTE: Use very little detergent in this cycle. If you want additional rinsing, you can add extra rinses by using the Extra Rinse button.
TOWELS
Use this cycle for washing towels, shirts, jeans and mixed loads.
Downloaded
If you download a cycle using a smart phone, it will be placed in the Downloaded cycle position. Choose the Downloaded cycle to run the cycle.
NOTE: The default cycle for this position is Small Load, used for normally soiled loads with just a few items. The Small Load cycle is also available to download.
HOW TO USE 23
CYCLE MODIFIER BUTTONS
Each cycle has default settings that are selected automatically. You may also customize these settings using the cycle modifier buttons. Press the button for the desired modifier until the indicator light for the desired setting is lit. The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency. Due to the high-efficiency nature of this
Wash Temp.
Wash Temp. selects the wash and temperature combination for the selected cycle. Press the Wash Temp. button until the indicator light for the desired setting is lit. All rinses use tap cold water.
yy Select the water temperature suitable for the type of load you are washing. Follow the garment fabric care labels for best results.
product, water levels may be much lower than expected. This is normal and cleaning/rinsing performance will not be compromised.
NOTE: To protect your garments, not every wash/ temperature, spin speed, soil level, or option is available with every cycle. A chime will sound and the LED will not light if a selection is not allowed.
Soil Levl
Adjusting the soil level setting will modify the cycle times and/or wash actions. Press the Soil button until the desired soil level is selected.
NOTE: This feature needs more time for heavily soiled loads or less time for lightly soiled loads.
Spin Speed
Higher spin speeds extract more water from clothes, reducing drying time and saving energy.
Press the Spin button until the desired speed is selected. Some fabrics, such as delicates, require a slower spin speed. To protect your clothing, not all spin speeds are available for all cycles.
Other Use
Pressing the OTHER USE button will allow you to select additional features, such as Soak, Stain Care™, Spin Only, and Rinse+Spin. Pressing the OTHER USE button before selecting a cycle will automatically default to the NORMAL cycle with the Soak feature selected.
<![endif]>ENGLISH
24 HOW TO USE
OTHER USE CARE FEATURES
After selecting a cycle, press the OTHER USE button to select additional features for the load.
NOTE:
yy To protect your garments, not every feature is available with every cycle.
yy If the START/PAUSE button is not pressed within five minutes to start the cycle, the control will shut off and all settings will be lost.
RINSE + SPIN
Select this option to rinse and spin a load separately from a regular cycle. This can be helpful in preventing fresh stains from setting in fabrics. You can change the spin speed by pressing the SPIN button.
1.Press the POWER button to turn on the washer.
2.Press the OTHER USE button until the Rinse+Spin indicator light is lit. (The cycle light will turn off.)
3.Press the START/PAUSE button to start the cycle.
SOAK
This option provides a 30-minute presoak prior to the start of the selected cycle. Use the SOAK option to presoak garments to help remove difficult spots or stains on fabrics. At the end of the presoak time, the selected cycle will begin with the same water used for the soak.
NOTE: You cannot select the SOAK option for the TUB CLEAN cycle.
STAIN CARE
Use this option for heavily soiled loads that need improved stain treatment. When Stain Care is selected, the wash cycle will begin with warm water to help prevent the setting of certain types of stains. Then, as the cycle progresses, hot water will be added to gradually increase the water temperature to help remove stains that require treatment at higher temperatures.
NOTE:
yy Best results are obtained with smaller loads (less Than 6 lb.)
yy If you select STAIN CARE, the COLD WASH option is not available.
SPIN ONLY
Use this option to drain the water from the tub and spin out the clothes. This can be used, for example, if the wash cycle is interrupted by a power failure. The spin speed can be adjusted by using the SPIN ONLY button.
1.Press the POWER button to turn on the washer.
2.Press the OTHER USE button repeatedly until Spin Only is selected.
3.Press the SPIN SPEED button to select the desired spin speed. Selecting NO SPIN is not allowed.
4.Press the START/PAUSE button.
SPECIAL DRAIN FEATURE
This washer is equipped with a special feature that is designed to make your washer as safe as possible. If the washer is paused or shut off while there is still water in the tub, the water will drain automatically after several minutes of inactivity. This helps keep children safe by reducing the possibility of water remaining in the tub.
Any water remaining in the tub will automatically drain 5 minutes after the washer has shut off. If the washer is paused and the START/PAUSE button is not pressed within 5 minutes, the washer will shut off and all cycle settings will be lost. And any water remaining in the tub will be drained.
The washer can be turned on or restarted any time before the drain begins. However, once the washer begins to drain, all controls and functions will be disabled until the water has been completely drained and the washer shuts off.
HOW TO USE 25
OPTION BUTTONS |
EXTRA RINSE |
Your washing machine features several additional cycle options that customize cycles to meet your individual needs. To use these options, select the desired option AFTER selecting the desired cycle.
After selecting the desired cycle and settings, press the cycle option button(s) for the option(s) you would like to add. The button will light when that option is selected. If the selected option is not allowed for the selected cycle, the chime will sound twice to alert you and the LED will not illuminate.
NOTE:
yy To protect your garments, not every option is available with every cycle.
yy If the START/PAUSE button is not pressed within 60 minutes to start the cycle, the control will shut off and all settings will be lost.
COLD WASH
This option saves energy by using cold water while increasing the wash and rinse times to maintain wash performance.
NOTE:
yy The Stain Care feature cannot be selected with the Cold Wash option.
yy Wash time will increase up to 50% with the Cold Wash option.
yy For best wash results, only wash small loads (less than 8 lbs.) with the Cold Wash option.
This option will add an extra rinse to the selected cycle. Use this option to help ensure the removal of detergent or bleach residue from fabrics. Liquid fabric softener, if used, is always dispensed in the final rinse.
NOTE: You cannot select the Extra Rinse option with the Spin Only option and Tub Clean cycle.
WATER PLUS
Use this option to add extra water to the wash cycle for better wash performance and stain treatment of large or bulky items.
NOTE:
yy If the washing machine reaches its maximum water level, the WATER PLUS button will have no effect.
yy The Water Plus option can only be selected or deselected while the cycle is running.
yy Once the Water Plus option has been added to a cycle, it is saved as a default option on that cycle until you deselect it.
yy To deselect the option, press WATER PLUS after starting the cycle.
Adding the Water Plus Option to a Cycle
1.While the cycle is running, press START/PAUSE to pause the cycle
2.Press WATER PLUS to add Water Plus as a default option for that cycle.
3.Press START/PAUSE to resume the cycle.
DELAY WASH
Once you have selected the cycle and other settings, press this button to delay the start of the wash cycle. Each press of the button increases the delay time by 1 hour, for up to 19 hours. Once the desired delay time is set, press the START/PAUSE button to start the delay time.
NOTE: If the START/PAUSE button is not pressed to begin the delay time, the washer will automatically shut off after five minutes and all cycle settings will be lost.
TURBO WASH™
Adding the Turbo Wash™ option reduces the cycle time while still providing similar wash performance to the same cycle without Turbo Wash.
NOTE:
yy The Turbo Wash™ option cannot be used with all cycles.
yy Turbo Wash™ defaults ON for NORMAL, PRE WASH + NORMAL, and SPEED WASH cycles.
SIGNAL
The washing machine plays a melody when the wash cycle has finished. Press and hold the EXTRA RINSE button for three seconds to activate or deactivate SIGNAL . When no signal is heard, the signal is off. The volume settings are ON/OFF.
CONTROL LOCK
Use this option to disable the controls. This feature can prevent children from changing cycles or operating the machine. Once the CONTROL LOCK is set, it must be deactivated before any controls, except the POWER button, can be used. Once the washer has shut off, the POWER button will allow the machine to be turned ON, but the controls will still be locked. When the controls are locked, CL will display alternately with the estimated time remaining.
Press and hold the SOIL LEVEL button for 7 seconds to activate or deactivate CONTROL LOCK.
NOTE: Once the controls are locked, they must be manually unlocked to restore operation.
<![endif]>ENGLISH
26 HOW TO USE
ADD GARMENTS
Laundry may ONLY be added to the load at the proper time in the wash cycle. When the Add Garments light is illuminated, it is safe to pause the cycle and add more items to the load. If garments are added when the Add Garments light is off, the washer will not adjust for these items which could result in poor performance and/or fabric damage.
1.Press the START/PAUSE button to pause the washer.
2.Open the lid after it unlocks.
3.Add your additional items.
4.Close the lid.
5.Press the START/PAUSE button. The cycle will resume after the lid locks.
NOTE:
yy The ADD GARMENTS light is an indicator only and is not selected by pressing the OTHER USE button.
yy If the washer remains idle for 5 minutes after pausing the cycle, the water in the tub will drain.