Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the product is
installed correctly and safely. Leave these instructions near the
product after installation for future reference.
The following safety guidelines are intended to prevent
unforeseen risks or damage from unsafe or incorrect
operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’
as described below.
This symbol is displayed to indicate matters and
operations that can cause risk. Read the part with this
symbol carefully and follow the instructions in order to
avoid risk.
WARNING
This indicates that the failure to follow the instructions can
cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can
cause the minor injury or damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of explosion, fire, death, electric shock,
injury or scalding to persons when using this product,
follow basic precautions, including the following:
Children in the Household
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
4
Installation
•Never attempt to operate the appliance if it is damaged,
malfunctioning, partially disassembled, or has missing or broken
parts, including a damaged cord or plug.
•This appliance should only be transported by two or more people
holding the appliance securely.
•Tighten the drain hose to avoid separation.
•If the power cord is damaged or the hole of the socket outlet is
loose, do not use the power cord and contact an authorized
service centre.
•Make sure the plug is completely pushed into the outlet.
•Do not install the appliance in a damp and dusty place. Do not
install or store the appliance in any outdoor area, or any area that
is subject to weathering conditions such as direct sunlight, wind,
or rain or temperatures below freezing.
•Ventilation openings must not be obstructed by a carpet.
•Do not plug the appliance into multiple socket outlets or extension
power cable.
•This appliance must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current.
•This appliance is equipped with a power cord having an
equipment-grounding conductor and a grounding power plug. The
power plug must be plugged into an appropriate socket outlet that
is installed and grounded in accordance with all local codes and
ordinances.
EN
5
•Improper connection of the equipment-grounding conductor can
result in risk of electric shock. Check with a qualified electrician or
service personnel if you are in doubt as to whether the appliance
is properly grounded.
•Do not modify the power cord provided with the appliance.
Operation
•Do not use a sharp object like drill or pin to press or separate an
operation unit.
•Keep the area underneath and around the appliance free of
combustible materials such as lint, paper, rags, chemicals, etc.
•Do not put animals, such as pets into the appliance.
•Do not leave the appliance door open. Children may hang on the
door or crawl inside the appliance, causing damage or injury.
•Use new hose or hose-set supplied with the appliance. Reusing
old hoses can cause a water leak and subsequent property
damage.
•Turn off water taps to relieve pressure on hoses and valves and to
minimize leakage if a break or rupture should occur. Check the
condition of the fill hoses; they may need replacement after 5
years.
•Never reach into the appliance while it is operating. Wait until the
drum has completely stopped.
•Do not put in, wash or dry articles that have been cleaned in,
washed in, soaked in, or spotted with combustible or explosive
substances (such as waxes, wax removers, oil, paint, gasoline,
degreasers, drycleaning solvents, kerosene, petrol, spot removers,
turpentine, vegetable oil, cooking oil, acetone, alcohol, etc.).
Improper use can cause fire or explosion.
EN
6
EN
•In case of flood, disconnect the power plug and contact the LG
Electronics customer information centre.
•Do not use or store flammable or combustible substances (ether,
benzene, alcohol, chemical, LPG, combustible spray, insecticide,
air freshener, cosmetics, etc.) near the appliance.
•If there is a gas leakage (isobutane, propane, natural gas, etc.),
do not touch the appliance or power plug and ventilate the area
immediately.
•If the drain hose or inlet hose is frozen during winter, use it only
after thawing.
•Keep all washing detergents, softener and bleach away from
children.
•Do not touch the power plug or the appliance controls with wet
hands.
•Do not bend the power cable excessively or place a heavy object
on it.
•Do not put your hand, foot or anything under the washing machine
while the washing machine is in operation.
•The hands shall not be inserted into running water-extracting
drum.
•Make sure that drainage is working properly. If water is not
drained properly, your floor may get flooded.
•If, during spinning, opening the door does not stop the drum within
about 15 seconds, immediately discontinue operating the
appliance and contact your dealer or LG Electronics service
centre.
7
•Do not use a plug socket and wiring equipment for more than their
rated capacity.
•When the air temperature is high and the water temperature is
low, condensation may occur and thus wet the floor.
•Wipe off dirt or dust on the contacts of the power plug.
•Under certain conditions hydrogen gas may be produced in a
water heater that has not been used for two weeks or more.
Hydrogen gas can be explosive under these circumstances. If the
HOT water has not been used for two weeks or more, prevent the
possibility of damage or injury by turning on all Hot water taps and
allowing them to run for several minutes. Do this before using any
electrical appliance which is connected to the HOT water system.
This simple procedure will allow any built-up hydrogen gas to
escape. Since the gas is flammable, do not smoke or use an open
flame or appliance during this process.
Maintenance
•Remove the power plug when you clean the appliance.
•Securely plug the power plug in the socket outlet after completely
removing any moisture and dust.
•Do not spray water inside or outside the appliance to clean it.
•Never unplug the appliance by pulling on the power cable. Always
grip the power plug firmly and pull straight out from the socket
outlet.
•Only qualified service personnel from LG Electronics service
centre should disassemble, repair, or modify the appliance.
Contact an LG Electronics customer information centre if you
move and install the appliance in a different location.
EN
8
Disposal
•Before discarding an old appliance, unplug it. Cut off the cable
directly behind the appliance to prevent misuse.
•Dispose of all packaging materials (such as plastic bags and
styrofoam) away from children. The packaging materials can
cause suffocation.
•Remove the door before disposing of or discarding this appliance
to avoid the danger of children or small animals getting trapped
inside.
For One Valve Model
•Do not connect to hot water supply.
EN
9
INSTALLATION
2
4
9
Parts
Door
1
Tempered Glass
Dispenser Drawer
3
Softener Dispenser
Bleach Dispenser
5
Lint Filter
6
Drum
7
Leveling Feet
8
Drain hose
Water Supply Hose
10
Accessories
ororor
2 water supply hoses
(Hot + Cold)
• Appearance and specifications may change without notice to improve the quality of the product.
10
Drain hoseAnti-rat cover
(Optional)
Screw for Anti-rat cover
Tie strap (Optional)
(Optional)
Specifications
ModelWT15DSBPWT16DSBPWT17DSBPWT18DSBP
Power Supply120 V~ 60 Hz
Power Consumption500 W
Size632 mm (W) x 670 mm (D) x 1020 mm (H)
Product Weight44.5 kg
Allowable water
pressure
30 - 800 kPa
Max. capacity15 kg16 kg17 kg18 kg
• Appearance and specifications may change without notice to improve the quality of the product.
EN
11
EN
Installation Place
Requirements
Location
10 cm2
Level floor: Allowable slope under the entire
appliance is 1°.
Power outlet: Must be within 1.5 meters of
either side of the location of the appliance.
• Do not overload the outlet with more than one
appliance.
Additional Clearance: For the wall, 10 cm:
rear/2 cm: right & left side.
• Do not place or store laundry products on top
of the appliance at any time. These products
may damage the finish or controls.
cm
WARNING
• The plug must be plugged into an appropriate
outlet that is properly installed and grounded
in accordance with all local codes and
ordinances.
Positioning
• Install the appliance on a flat hard floor.
• Make sure that air circulation around the
appliance is not impeded by carpets, rugs,
etc.
• Never try to correct any unevenness in the
floor with pieces of wood, cardboard or similar
materials under the appliance.
cm
2
• If it is impossible to avoid positioning the
appliance next to a gas cooker or coal burning
stove, an insulation (85x60 cm) covered with
aluminum foil on the side facing the cooker or
stove must be inserted between the two
appliances.
• Do not install the appliance in rooms where
freezing temperatures may occur. Frozen
hoses may burst under pressure. The
reliability of the electronic control unit may be
impaired at temperatures below freezing point.
• Ensure that when the appliance is installed, it
is easily accessible for an engineer in the
event of a breakdown.
• If the appliance is delivered in winter and
temperatures are below freezing, place the
appliance at room temperature for a few hours
before putting it into operation.
WARNING
• This equipment is not designed for maritime
use or for use in mobile installations such as
caravans, aircraft etc.
Electrical Connection
• Do not use an extension cord or double
adapter.
• Always unplug the appliance and turn off the
water supply after use.
• Connect the appliance to an earthed socket in
accordance with current wiring regulations.
• The appliance must be positioned so that the
plug is easily accessible.
• Repairs to the appliance must only be carried
out by qualified personnel. Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local
service centre.
12
EN
Connecting the Supply Hose
• Before connecting the water supply hose to
the water tap, check the hose type and then
choose the correct instruction.
• The water supply hose supplied may vary
from country to country. Make sure to connect
the blue supply hose to the COLD water tap,
and the orange supply hose to the HOT water
tap.
• Water supply pressure must be between 30
kPa and 800 kPa (0.3 - 8.0 kgf / cm²).
• Do not overtighten the water supply hose.
• If the water supply pressure is more than 800
kPa, a decompression device should be
installed.
• Periodically check the condition of the hose
and replace the hose if necessary.
Checking the Rubber Seal on the
Supply Hose
Two rubber seals are supplied with the water
supply hoses. They are used for preventing
water leaks. Make sure the connection to taps
is sufficiently tight.
Connecting Hose to Water Tap
Connecting Screw-Type Hose to Tap
with Thread
Screw the hose connector onto the water
supply tap.
Connecting Screw-Type Hose to Tap
Without Thread
Loose the four fixing screws.
1
connector
Fixing screw
Upper
Rubber
seal
Hose connector
Rubber seal
Hose connector
Rubber seal
Remove the guide plate if the tap is too
2
large to fit the adapter.
Guide plate
13
EN
Push the adapter onto the end of the tap so
3
that the rubber seal forms a watertight
connection. Tighten the four fixing screws.
Push the supply hose vertically upwards so
4
that the rubber seal within the hose can
adhere completely to the tap and then
tighten it by screwing it to the right.
Plate
Supply
hose
Connecting One Touch Type Hose to
Tap Without Thread
Unscrew the adapter ring plate and loose
1
the four fixing screws.
Remove the guide plate if the tap is too
2
large to fit the adapter.
Guide plate
Push the adapter onto the end of the tap so
3
that the rubber seal forms a watertight
connection. Tighten the four fixing screws
and the adapter ring plate.
Pull the connector latch plate down, push
4
the supply hose onto the adapter, and
release the connector latch plate. Make
sure the adapter locks into place.
Latch plate
14
Ring plate
NOTE
• After connecting the supply hose to the water
tap, turn on the water tap to flush out foreign
substances (dirt, sand, sawdust, and etc.) in
the water lines. Let the water drain into a
bucket, and check the water temperature.
EN
Connecting Hose to Appliance
Attach the hot water line to the hot water inlet
on the back of the washing machine. Attach the
cold water line to the cold water inlet on the
back of the washing machine.
NOTE
• After completing connection, if water leaks
from the hose, repeat the same steps. Use
the most conventional type of tap for the water
supply. In case the tap is square or too big,
remove the guide plate before inserting the
tap into the adaptor.
Installing the Drain Hose
Before connecting the drain hose, check your
drain hose model and choose the correct
instruction.
Pump Model
• The drain hose should not be placed higher
than 120 cm above the floor. Water in the
washing machine may not drain or may drain
slowly.
• Securing the drain hose correctly will protect
the floor from damage due to water leakage.
• If the drain hose is too long, do not force it
back into the washing machine. This will
cause abnormal noise.
• When installing the drain hose to a sink,
secure it tightly with string.
Laundry tub
Hose
retainer
0.9 - 1.2 m
Tie strap
0.9 - 1.2 m
NOTE
• The discharge height should be approximately
0.9 - 1.2 m from the floor.
15
EN
Non-pump Model
Push the elbow hose toward the body of the
1
washing machine.
To change the direction of the hose, pull out
2
the elbow hose and change the direction.
Repeat Step 1.
Positioning the Drain Hose
• The length of the drain hose should not
exceed 3 m.
• Do not place the drain hose on a threshhold
of 6 cm or more.
max. 3 m
max. 6 cm
• Make sure the drain hose is not kinked.
• The outlet of the drain hose should not be
submerged in water.
• Make sure the drain hose is not kinked.
16
EN
Leveling the Appliance
If the floor is uneven, turn the adjustable feet as
required (Do not insert pieces of wood etc.
under the feet). Make sure that all four feet are
stable and resting on the floor and then check
that the appliance is perfectly level.
Diagonal Check
• When pushing down the edges of the
appliance top plate diagonally, the appliance
should not move up and down at all (Check
both directions). If the appliance rocks when
pushing the machine top plate diagonally,
adjust the feet again.
NOTE
• Timber or suspended type flooring may
contribute to excessive vibration and
unbalance.
• If the washing machine is installed on a raised
platform, it must be securely fastened in order
to eliminate the risk of falling off.
• If the washing machine is installed on a
uneven, weak or tilted floor causing excessive
vibration, spin failure or error can occur. It
must be placed on a firm and level floor to
prevent spin failure.
Assembling the Anti-Rat
Cover (Optional)
Insert the Anti-Rat cover to the assembling hole
from the front or back of the washing machine.
Type 1
Type 2
17
OPERATION
EN
Using the Appliance
Before the first wash, select a washing
programme (Normal, add a half load of
detergent), allow the washing machine to wash
without clothing. This will remove residue and
water from the drum that may have been left
during manufacturing.
Sort laundry and load items.
1
• Sort laundry by fabric type, soil level,
colour and load size as needed. Open the
door and load items into the washing
machine.
Add cleaning products and/or detergent and
2
softener.
• Add the proper amount of detergent to the
detergent dispenser drawer. If desired,
add bleach or fabric softener to the
appropriate areas of the dispenser.
Turn on the washing machine.
3
• Press the Power button to turn on the
washing machine.
Choose the desired wash programme.
4
• Press the Programa button repeatedly
until the desired programme is selected.
Begin programme.
5
• Press the Start/Pause button to begin the
programme. The washing machine will
agitate briefly without water to measure
the weight of the load. If the Start/Pause
button is not pressed within 60 minutes,
the washing machine will shut off and all
settings will be lost.
End of programme.
6
• When the programme is finished, a
melody will sound. Immediately remove
your clothing from the washing machine to
reduce wrinkling.
NOTE
• The Auto Restart function allows the
programme to restart by itself in case of
power failure. lt resumes from the stage where
it stopped.
18
EN
Sorting Laundry
Look for a care label on your clothes.
1
• This will tell you about the fabric content
of your garment and how it should be
washed.
• Symbols on the care labels.
[Wash temperature]
[Normal machine wash]
[Permanent press]
[Delicate]
[Hand wash]
[Do not wash]
Sorting laundry.
2
• To get the best results, sort clothes into
loads that can be washed with the same
wash cycle.
• Different fabrics need to be washed at
varying temperatures and spin speeds.
• Wash two or more towels or knits
together. If washed separately, laundry
which absorbs a lot of water may not be
washed well or abnormal spin-drying may
occur due to leaning.
• Always sort dark colours from pale colours
and whites. Wash separately as dye and
lint transfer can occur causing
discolouration of white and pale garments.
If possible, do not wash heavily soiled
items with lightly soiled ones.
− Soil (Heavy, Normal, Light) :
Separate clothes according to amount of
soil.
− Colour (White, Lights, Darks):
Separate white fabrics from coloured
fabrics.
• Combine large and small items in a load.
Load large items first.
• Large items should not be more than half
the total wash load. Do not wash single
items. This may cause an unbalanced
load. Add one or two similar items.
• Check all pockets to make sure that they
are empty. Items such as nails, hair clips,
matches, pens, coins and keys can
damage both your washing machine and
your clothes.
• Close zippers, hooks and strings to make
sure that these items don’t snag on other
clothes.
• Pre-treat dirt and stains by brushing a
small amount of detergent dissolved water
onto stains to help lift dirt.
CAUTION
• Do not wash or spin any item labeled or
known to be water-proof or water-resistant,
even if the product care label on the item
permits machine washing. Failure to follow
these instructions could result in severe
damage to your laundry, your washing
machine and/or property damage as a result
of abnormal vibration of the washing machine.
− Examples of water-proof or water-resistant
items include certain mattress pads,
mattress covers, rain gear, camping gear,
skiing apparel, outdoor gear and similar
items.
19
EN
Adding Cleaning Products
Detergent Dosage
• Detergent should be used according to the
instruction of the detergent manufacturer and
selected according to type, colour, soiling of
the fabric and washing temperature.
• If too much detergent is used, too many suds
can occur and this will result in poor washing
results or cause heavy load to the motor.
• If you wish to use liquid detergent follow the
guidelines provided by the detergent
manufacturer.
• You can pour liquid detergent directly into the
main detergent drawer if you are starting the
cycle immediately.
• Do not use liquid detergent if you are using
Time delay, or if you have selected Pre Wash,
as the liquid may harden.
• If too many suds occur, reduce the detergent
amount.
• Detergent usage may need to be adjusted for
water temperature, water hardness, size and
soil level of the load. For best results, avoid
oversudsing.
• Refer to the label of the clothes, before
choosing the detergent and water
temperature.
• When using the washing machine, use
designated detergent for each type of clothing
only:
− General powdered detergents for all types of
fabric
− Powdered detergents for delicate fabric
− Liquid detergents for all types of fabric or
designated detergents only for wool
• For better washing performance and
whitening, use detergent with the general
powdered bleach.
• Detergent is flushed from the dispenser at the
beginning of the cycle.
• Dilute liquid detergent with water and pour into
the drum, start the cycle.
• Using liquid detergent without diluting, or
leaving laundry for a long time after pouring
diluted liquid detergent into the drum might
cause damage, bleaching or discoloration of
cloth.
NOTE
• Do not let the detergent harden. Doing so may
lead to blockages, poor rinse performance or
odour.
• Full load : According to manufacturer’s
recommendation.
• Part load : 3/4 of the normal amount
• Minimum load : 1/2 of full load
Adding Detergent
• Follow the detergent package directions.
Using too little detergent is a common cause
of laundry problems. Use more detergent if
you have hard water, large loads, greasy or
oily soils or lower water temperature.
• Soap flakes or granulated soap powders
should not be used in your washing machine.
When washing woolens, remember to use
detergent suitable for washing woolens.
NOTE
• Too much detergent, bleach or softener may
cause an overflow.
20
EN
Adding Fabric Softener
• Dilute fabric softener with water. Undiluted
fabric softener may result in spots that look
like oil stain.
• Measure and add the recommended amount
of fabric softener into the compartment
marked with this symbol ( ).
− Follow manufacturer’s direction.
− Fabric softener is automatically dispensed in
the final rinse with indication beep.
− If you want extra rinse, you must add fabric
softener manually when indication beep
rings in the final rinse. This maximizes the
fabric softener function.
• Do not overfill. The dispenser holds max 35
mL. Never add more than 35 mL. Overfilling
can cause early dispensing of the fabric
softener which could result in stained clothes.
A cup with a pouring spout will help you avoid
spelling.
• The effect of adding fabric softener may vary
according to its viscosity. The sticker fabric
softener makes its effect lower. For a sticky
softener it is recommended that it be diluted
with water, then be manually put during the
time when the washer beeps several times
before the final rinse. This function informing
correct time dispense manually is optionally
applied to some models. Please keep it in
mind that fabric softener has to be diluted with
water before dispensed and poured directly on
clothes.
Adding Liquid Bleach
• Check clothing care label for special
instructions and separate the laundry to be
bleached.
• Dilute liquid chlorine bleach.
• Measure the recommended amount of liquid
bleach carefully following instructions on the
bottle.
• Before starting the washing machine, pour the
measured amount of bleach directly into the
bleach dispenser. Avoid splashing or
overfilling. Powdered bleach should be mixed
with water before being poured into the
dispenser.
NOTE
• Never pour undiluted liquid bleach directly
onto clothes or into the wash basket. This
may cause change of color or damage the
laundry.
• Do not pour powdered bleach into the bleach
dispenser.
NOTE
• Do not mix with detergent or bleach.
• Never pour fabric softener directly on clothes.
It may stain them.
• Do not stop the washer during the first spin for
timely dispensing.
• Option washing is not designed to be used
with fabric softener dispenser.
21
Control Panel
1
3
EN
Power Button
• Press the Power button to turn the
washing machine on.
• The appliance will automatically turn off
once a certain time has passed after the
wash has completed.
Start/Pause Button
2
• Press the Start/Pause button to start the
wash cycle or pause the wash cycle.
• If a temporary stop of the wash cycle is
needed, press the Start/Pause button.
Program Button
• Programmes are available according to
laundry type.
• Lamp will light up to indicate the selected
programme.
Option Button
4
• Press buttons to select the desired
options.
Display
5
• The display shows the settings, estimated
time remaining, options, and status
messages. When the product is turned on,
the default settings in the display will
illuminate.
• The process lamp will remain prior to it
beginning. The process lamp will blink
during that process, and the lamp will then
turn off when that process has completed.
22
EN
Washing Programme
Wash cycles are designed for the best wash
performance for each type of load. Select the
programme that best matches the load contents
for maximum wash performance and fabric
care. Press the Programa button to select the
desired programme. When you select a wash
programme, the light for the corresponding
wash programme will turn on.
Normal (Normal)
Use this programme to wash normal loads. The
built-in sensor detects the size of the load,
calculating wash, rinse and, spin settings
accordingly.
• If water or wet laundry is already in the drum
before starting, the water level will be
increased.
• For lightweight bulky loads, the water level
may be too low and should be increased
manually.
Lana (Wool)
Use this programme to wash delicate fabrics
such as lingerie and woolens. Before washing,
check the care label for the washing
instructions.
• This programme uses a slow spin to extract
water from laundry, so the laundry has more
moisture than normal.
• Only cold water will be used for this
programme as hot water may damage laundry.
Edredones (Duvet)
Use this programme to wash a blanket or
bedclothes with hand wash sign.
• Cashmere bedclothes, acrylic blanket, mixed
spinning blanket, woolen blanket, infilling
(polyester 101), and bed sheet might be
damaged by floating. Please purchase a
separate laundry net to wash.
• Separate bed clothes from general clothes. It
might cause laundry to askew and results in
abnormal washing.
• Spin dry might take longer to spread out
laundry if bedclothes are lumped to a side.
• Never wash an electric blanket and a carpet.
It cause damage to a laundry machine and
the laundry.
• Please use a laundry net to soak and sink
bedclothes that are easily inflated. It might
cause damage to laundry and machine parts if
inflated.
• Regardless of its size, we recommend to
wash one by one. If two bedclothes with
different materials are washed at a time, it
might cause abnormal spin dry due to
imbalance.
NOTE
• How to put a blanket into the drum
Below this line
NOTE
• Hang or lay flat to dry your delicates.
23
EN
Silencioso (Silent)
Use this programme to wash quietly in silent
especially during late night and dawn.
• This programme takes longer washing time
than the Normal programme.
• To reduce noise in spinning, this programme
uses a slow spin to extract water from laundry,
so the laundry has more moisture than
normal.
Prelavado + Normal (Pre Wash +
Normal)
Use this programme to pretreat immediate stain
without handwash. It is necessary for clothes
which could smell bad without prompt laundry.
Program
Normal (Normal)
Lana (Wool)
Edredones (Duvet)
Silencioso (Silent)
Prelavado + Normal (Pre Wash + Normal)
Lavado Rápido (Quick Wash)
Limpieza Extra (Extra Clean)
WT15DSBPWT16DSBPWT17DSBPWT18DSBP
Less than
15 kg.
Less than
2 kg.
Less than
15 kg.
Less than
15 kg.
Less than
15 kg.
Less than
3 kg.
Less than
15 kg.
Lavado Rápido (Quick Wash)
Use this programme to wash lightly soiled
clothes for a short time. This programme's
recommended laundry amount is under 3 kg.
Limpieza Extra (Extra Clean)
Use this programme to increase rinsing
performance. This would include underwear and
baby clothes. If someone has sensitive skin or
skin trouble, use this programme.
Load Recommend
Less than
16 kg.
Less than
2 kg.
Less than
16 kg.
Less than
16 kg.
Less than
16 kg.
Less than
3 kg.
Less than
16 kg.
Less than
17 kg.
Less than
2 kg.
Less than
17 kg.
Less than
17 kg.
Less than
17 kg.
Less than
3 kg.
Less than
17 kg.
Less than
18 kg.
Less than
2 kg.
Less than
18 kg.
Less than
18 kg.
Less than
18 kg.
Less than
3 kg.
Less than
18 kg.
24
EN
Option Programme
Nivel de suciedad (Soil Level)
• This button allows you to select the strength
of the wash action.
• There are 2 levels for Soil Level selection :
Heavy and Light. This can be selected for any
programme.
• If you do not select the Soil Level, it will be in
the Normal state with the light turned off.
• Adjustment can be made while washing.
Temp. (Temp.)
• If you want to to select water temperature,
press the Temp. button to allow you to select:
Cold → Warm (Hot & Cold) → Hot → Cold
respectively.
• Default setting is Cold.
Nivel de Agua (Water Level)
• Press the Nivel del Agua button to adjust
water level.
• It can be changed during operation.
• This machine detects the quantity of laundry
automatically, then sets Water Level. It may
be necessary to increase the water level
manually when washing bulky light weight
clothes.
• When you select a wash programme, the
Water Level will be shown on the control
panel.
• When Water Level is automatically detected, it
may differ depending on the quantity of
laundry even though the same Water Level is
indicated on the control panel.
Lavado (Wash)
• Press the Lavado button to change laundry
time.
• Adjusting the wash level setting will modify the
cycle times and/or wash actions. Press the
Lavado button until the desired wash level is
selected.
Enjuague (Rinse)
• Press the Enjuague button to change the
number of rinses.
Centrifugado (Spin)
• Press the Centrifugado button to change spin
strength.
• Press Start/Pause button to indicate
remaining time.
NOTE
• Always keep the laundry amount to 2 kg or
less and make sure to spread it out evenly.
25
EN
Reserva (Delay)
• You can set a time delay so that the washing
machine will start automatically and finish after
a specified time interval.
Press the Power button.
1
Select a washing programme.
2
Press the Reserva button to set the
3
required Delay time.
Press the Start/Pause button.
4
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
load and other factors.
• Reservation can be made up to 18 hours by
1-hour interval up to 3 - 12 hours and 2-hour
interval for 12 - 18 hours. The Delay cannot
be set for less than 3 hours.
• To cancel the Delay function, press Reserva
button repeatedly until the reservation is
canceled or press the Power button to turn off
and on power.
Remojo (Soak)
• Remojo can be selected to wash heavily
soiled laundry by soaking in water for some
time to remove dirt and grime.
• Press the Lavado button until the and
lights turn on simultaneously.
26
Loading...
+ 58 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.