LG WT1485CW Owner’s Manual

P/No.: MFL30138475

WASHING MACHINE

OWNER'S MANUAL

website : http://www.lg.ca e-mail : http://www.LGEservice.com/techsup.html

MODEL : WT1485CW

ontents

Important Safety Information

Read this manual

Identification of Parts Before Starting to Wash

Operating Instructions

Additional Function Options

Installation Instructions

User Maintenance Instructions

Specifications Fabric Care Labels

Troubleshooting Warranty

4 How to Remove Stains 5 Preparation Before Washing 6 Water Level and Temperature 7 Use of Detergent 8 Use of Softener and Bleach 9 Function of Each Button 10 FUZZY Wash 12 DELICATE Wash 12 QUICK Wash 12 JEAN Wash 12 WOOL Wash 12 SILENT Wash 12 SPEEDY SOAK Wash 13 FAVORITE Wash 14 TUB CLEAN 15 DELAY START (RESERVATION) Wash

16 Option 17 Washing Option 18 Other Useful Functions 19 Placing and Leveling 20 Connecting Hoses 21 Washer Connections for Portable Model 22 Grounding Instructions 23 User Maintenance Instructions 24 Troubleshooting 26 Warranty 29 Specifications 30 Fabric Care Labels 31

Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your washer. You will find many answers to common problems in the Troubleshooting section. If you review our pages of Troubleshooting first, you may not need to call for service at all.

Important Safety Inf ormation

mportant Safety Information

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

READ ALL INSTRUCTIONS BEFORE USE.

W ARNING!

• Read all instructions before using the washer.

• Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.

• Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

• Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE! If the hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets, and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

• Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children.

• Before the washer is removed from service or discarded, remove the lid to prevent children from hiding inside.

• Do not reach into the washer if the basket or agitator is moving.

• Do not install or store the washer where it will be exposed to the weather.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out.

• See Installation Instructions for grounding requirements.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not use an adapter or otherwise defeat the grounding plug. If you don’t have the proper outlet, consult an electrician.

IMPORT ANT SAFETY INSTRUCTIONS

WARNING:

T o reduce the risk of fire, electric shock, or injury to persons when using the washer,

follow basic precautions, including the following:

SA VE THESE INSTRUCTIONS

WARNING:

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

dentification of Parts

Accessories

Identification of Parts

POWDER DETERGENT BOX

SOFTENER INLET

Softner will automatically flow into the tub.

BLEACH DISPENSER

FUNCTION SELECTOR

TUB

START/PAUSE BUTTON

Use to start or stop the washing machine temporarily.

WATER SUPPLY HOSE

Make sure the water does not leak.

POWER PLUG

If the supply cord is damaged, it must 5be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard.

LINT FILTER

Clean regularly to stop linting on the clothes load.

DRAIN HOSE

Check if the drain hose is hung up before operating the washing machine.

Leg Stopper

(Option)

2 Pieces

Complete hose

(Option)

Inlet hose Drain hose Tie strap

1 Each for cold and

hot water

BASE

to secure drain hose to standpipe, inlet hose or laundry tub

Before Star ting t o Wash

ow to Remove Stains

How to Remove Stains

Pretreating dirt and stains

Brush a little washing detergent dissolved in water onto stains, collars, and cuffs to help shift dirt. The secret of stain treatment is immediate action. When an accident happens, plunge the stained area into cold water and sponge it down. This prevents the stain from setting. Wash as soon as possible afterwards.

• Treat stains AS SOON AS POSSIBLE. The longer they are left, the harder it is to remove them.

• Always consider the type of fabric you are treating to make sure you do not use a water temperature that is too hot or a treatment that will alter the color of the fabric. It pays to pre-wash products and solvents on an inconspicuous part of the garment first.

• Place the garment being treated on an absorbent cloth, such as an old towel. Work from the reverse side of the stain, as this can force the stain off the fabric instead of through it.

• Use cold or warm water on unknown stains as hot water can set some stains.

• Some stains are not easily seen when the fabric is wet. Air dry the stained garment to be sure the stain has been removed, as heat from a dryer may set the stain.

• Take care with stain removal treatments as they are often flammable and highly poisonous. Do not use them in your washer as they may damage the paint or plastic components.

• Some pretreatment sprays or liquids can damage control panel of your washer.

Diaper Sanitizers

• Diaper sanitizers are very corrosive to metal surfaces. DO NOT soak diapers in sanitizers in your washer or tip the contents of the diaper bucket into your machine.

Rinse and wring diapers out thoroughly before placing them in your machine.

Diapers

• Scrape off any excess baby cream, such as Vaseline , from the diapers before washing and handwash to prevent the cream being transferred to other items in the wash.

Before Star ting t o Wash

Clothes like downs and woolens are lightweight, large, and float easily. You can use a nylon laundry washing bag specifically designed for washing light items... If the laundry floats during the wash cycle, it may become damaged. Use dissolved detergent to prevent the detergent from clumping.

repar ation Befor e Washing

• Check all pockets are empty. Things such as nails, hairclips, matches, pens, coins, and keys can damage both your washer and your clothes.

• Mend any torn garments or loose buttons. Tears or holes may become larger during washing.

• Remove belts, underwires, etc. to prevent damage to the machine or your clothes.

• Pretreat any dirt and stains.

• Make sure the clothes are washable in water.

• Check the washing instructions on care label. (Refer to page 30.)

To get the best results, different fabrics is needed to be washed in different ways.

• SOIL (Heavy, Normal, Light) Separate clothes according to the type and amount of soil.

• COLOR (Whites, Lights, Darks) Separate white fabrics from colored fabrics.

• LINT (Lint Producers, Collectors) Separate lint producers and lint collectors.

• Lint Producers Terry cloth, Chenile, Towels, Nappies, Diapers

• Lint Collectors Synthetics, Corduroy, Permanent Press, Socks

Sorting

Check before Loading

Look for a care label on your clothes. This will tell you about the fabric content of your garment and how it should be washed. (Refer to page 30.) Sort clothes into loads that can be washed with the same wash cycle, water temperature, and spin speed.

Care Labels

Use nylon nets for long, delicate items. For laundry with long strings or long length , a net will prevent tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.

Nylon net is not supplied by LG.

•

Light and Large-sized Clothing

•

Long laundry items

•

Load Size

The water level should be greater than the amount of laundry. Load laundry loosely no higher than the top row of holes in the washer tub. To add items after washer has started, press the START/PAUSE button and submerge additional items. Close the lid and press the START/PAUSE button again to restart.

Fire Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids. No washer can remove oil completely. Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so can result in death, explosion, or fire.

WARNING

WIRE

Before Star ting t o Wash

ater Level and Temperature

Water Temperature

• You can change the water temperature by pressing the WATER TEMP. button.

The temperature of the water impacts the effectiveness of all laundry additives and, therefore, which results in wash performance. We recommend the water temperature as follows :

• Temperature below 65˚F (18˚C) will not activate laundry additives and may cause lint, residue, poor cleaning, etc. In addition, detergent manufactures and care labels define cold water as 80~85˚F (26.5~29.5˚C).

If the temperature of the water in the tub is cold to your hands, the detergent will not be activated and clean effectively.

• This machine detects the quantity of laundry automatically, then sets the water level and proper amount of detergent.

• When you select a wash program, the water level and amount of detergent (to be used) will be shown on the control panel.

• When the water level is automatically detected, it may differ depending on the quantity of laundry even though the same water level is indicated on the control panel.

Water Level

(refer to p10)

• If you do not specify the water level ‘L(Large)’ will be automatically selected.

Note

* When washing in cold water, additional steps may be needed:

- Adjust detergent amount and pre-dissolve detergent in warm water

- Pretreat spots and stains

- Soak heavily soiled items

- Use appropriate bleach

HOT 120 - 140˚F : White items, diapers, underclothes, and heavily soiled, colorfast items.

(49 - 60˚C)

WARM 85 - 105˚F : Most items

(29.5 - 40.5˚C)

COLD 65- 75˚F: Lightly soiled items

(18-24˚C)

Before Star ting t o Wash

se of Deter gent

Amount of Detergent

• Follow the directions on the detergent package.

• Using too little detergent is a common cause of performance problems.

• Use more detergent if you have hard water, large loads, greasy or oily soils, or lower water temperature.

• The correct amount of detergent will vary depending on the amount of soil in your clothes. (Jeans and work clothes may need more detergent while bath towels need less.)

• For liquid and concentrated detergent, follow the recommendations of the detergent manufacturer.

To see if you are using the correct amount of detergent, lift the lid of your washer about half-way during the wash. There should be a thin layer of foam over the surface of the water. Lots of foam seems to be good, but it does not contribute to washability. No foam means not enough detergent has been used; soil and lint can settle back on the clothes or the washing machine.

• We recommend powdered detergent for the detergent box.

• Soap or granulated soap powders should not be used in your washing machine to prevent build-up.

• When washing woolens, remember to use a detergent suitable for washing woolens.

If excessive detergent is used, the rinse will not be as clean and efficient. Also, it could cause environmental pollution, so measure and add detergent accordingly.

Attention

Choosing the Right Detergent

• Pull out the detergent box and deposit the appropriate amount of detergent .

Adding the Detergent

• Some detergents MUST be fully dissolved before adding to your machine to get the best wash results. Check the instructions on the detergent package.

• If you add powdered detergent to the wash tub directly, it is essential that the required amount be fully dissolved in hot water before being added to warm or hot water for the actual wash. Pre-dissolving detergent in warm water when washing in cold water can improve its performance.

Note

Dónde deposita el detergente

Dispensador de detergente en polvo.

Where you deposit the Detergent

Powder Detergent Box

( )

Before Star ting t o Wash

se of Soft ener and Bleach

Available Fabric Softener Type

• Do not use concentrated fabric softener. This may cause some problems in automatic dispensing.

• For more details, refer to the softener product instructions for use.

Depositing Fabric Softener

• Don't use softener with detergent. Softener is dispensed into the last rinse water.

• When using concentrated softener, dilute 1 oz. (30ml) of softener with 1 oz. (30ml) of fresh water.

• When filling dispenser, do not splash or overfill. It may stain clothes.

• Never pour fabric softener directly on clothes. It may stain them.

• Never pour fabric softener directly on clothes. It may stain clothes.

• If spotting occurs, wet and rub with dishwashing liquid (or mild bar soap) and rewash.

• Add 60ml (2 oz.) of fabric softener in the dispenser when starting the washer. It will be dispensed into the final rinse at the proper time. See the attention, below, for using concentrated fabric softener in the dispenser.

Depositing Bleach

• Separate the laundry to be bleached.

• Measure liquid bleach carefully by the instructions on the bottle.

• Before starting the wash, pour measured amount of bleach directly into the bleach dispenser.

• Avoid splashing or overfilling. If you prefer to use powdered bleach, add it into the detergent box with your detergent.

• The bleach inlet dilutes liquid bleach before it reaches into your

laundry.

Using Bleach

Using Softener

Check fabric care labels for special instructions.

Attention

• Never pour undiluted liquid bleach directly onto the clothes or into the wash tub. This may damage the laundry.

• Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing can produce a toxic gas which may cause death.

• Do not pour powdered bleach into the bleach inlet. Powdered bleach should be dissolved with water to be deposited into the bleach inlet.

• For more details, refer to the product instructions for use.

Bleach inlet

( )

Operating Instructions

unction of Each But ton

● The FUZZY program is used for average

day-to-day washing.

● Press the POWER button to turn power on.

● Load clothes.

● Press the START/PAUSE button.

● The water level lights will scroll up and down while

the washer is determining the optimum water level for your load.

● Add detergent, bleach, and softener as desired

into the appropriate dispenser.

● Close the lid.

Fully automatic control

* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by

8minutes at maximum and decreased by 4 minutes at maximum.

* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically

adds rinsing, and the remaining time may be increased.

* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to

the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.

DELAY START (RESERVATION) BUTTON

• Use to set a delayed finishing time.

• The time increases when the button is pushed.

• The following settings are indicated as the button is pushed 3

4 5

...11 12 14 16 ...46

48 3 HOUR.

• To cancel delay time, turn the power switch off.

(refer to page 16)

• Use to adjust the WATER LEVEL as required. The appropriate amount of Detergent is shown next to the WATER LEVEL in the WATER-DETERGENT diagram

• WATER LEVEL is automatically selected for FUZZY program. The following settings are indicated as the button is pushed LARGE LARGE . EX-LARGE EX-LARGE SMALL SMALL • MEDIUM

MEDIUM MEDIUM • LARGE LARGE

WASHING CONDITION INDICATOR

• It only operates in FUZZY Program.

• During being detected by the sensor, the LED flashes green, orange and red in turn. And, after detecting, the LED lights a specific color according to the detecting condition as follows:

If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is determined as better than the standard one, it optimizes the algorithm to save the energy by decreasing washing time/strength, and the LED automatically turns to red. If the current washing condition is determined as worse than the standard one, it optimizes the algorithm by increasing washing time/strength, and the LED automatically turns to orange. If the current washing condition is determined as equal to the standard one, the algorithm has no change and the LED turns to green.

• Use to select Water Temperature. Pressing the button allows you to select WARM (HOT&COLD) HOT COLD WARM (HOT&COLD) respectively.

WATER TEMPERATURE BUTTON

OPTION BUTTON

WATER LEVEL BUTTON

(INDICATION OF DETERGENT AMOUNT)

• According to kinds of laundry, Air Dry, soiled extent or washing habit you can select suitable OPTION manually.

• By pressing the button OPTION is changed.

(refer to page 17)

Note

Operating Instructions

Other programs are selected as follows:

● Press the POWER button to turn power on.

● Load clothes.

● Add detergent, bleach, and softener as desired in the appropriate dispensers.

● Select water temperature, water level, program, and wash options as described below.

● Close the lid and press the START/PAUSE button.

Manual control

* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a

liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.

* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use

TUB CLEAN course to clean the tub. (refer to page 15)

* Even if the water level or the water temperature are changed by the user in FUZZY Program,

the sensor will still work. The sensor algorithm may differ according to models.

* The control panel may differ according to different models.

TIME LEFT, DELAY START (RESERVATION), ALARM INDICATION

• Time left - During operation, the remaining time is indicated.

• DELAY START INDICATION (RESERVATION) - When

DELAY START (RESERVATION) program is selected, it indicates the finishing time. (RES.=DELAY)

• Alarm indication -When an error occurs, an error message

appears to indicate the abnormality. For example, indicates that the lid is open.

CHILD LOCK FUNCTION

• Use to lock or unlock the control buttons to prevent settings from being changed by a child. To lock, push the PROCESS and PROGRAM buttons simultaneously and to unlock push them one more time during the washing process.

(refer to page 19)

START/ PAUSE BUTTON

• Use to start or pause the washing process.

• Repeats start and pause by pushing the button.

PROCESS BUTTON

• Use to select SPEEDY SOAK Wash, Rinse and Spin functions as desired.

AUTO OFF (POWER) BUTTON

• Use to turn the power on or off.

• Push again and power goes on or off

• The power goes off automatically about 10 seconds after the wash is finished.

PROGRAM BUTTON

• Use for selecting wash program.

• This button allows you to select 4 different programs for different kinds of laundry and dirtiness.

• program selections light up in sequence as follows:

FUZZY DELICATE QUICK WASH JEAN WOOL SILENT FAVORITE TUB CLEAN

FUZZY etc. Select the desired program by pressing the button.

Operating Instructions

ashing Progr ams

Press the POWER button to turn the power on.

Press the PROGRAM button to select the washing program.

Thick and heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed.

Delicate clothes (lingerie, woolens, etc.) which may be easily damaged can be washed.

• Before washing your woolens, check the care label for the washing instructions. (Machine washable woolens have been specifically modified to prevent felting when they are machine washed. Most handknitted garments are not made of machine washable wool so we recommend that you wash them with hand.)

• When washing woolens, use a mild detergent recommended for washing wool.

• Hand washed woolens may be spun in the washing machine to reduce the time to dry.

• To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight. (The heat and tumble action of a dryer may cause shrinkage or felting of woolen garments.) Some underlaid woolens and sheepskin products machine may cause pump blockages during washing.

• Ensure that the whole article is suitable for machine washing and not just the backing material.

JEAN Wash

WOOL Wash

Quick Wash can be selected to wash lightly soiled clothes for a short time.

QUICK Wash

Use this program to wash quietly at night.

SILENT Wash

Delicate clothes (lingerie etc.) which may be easily damaged can be washed.

DELICATE Wash

Use this program for normal clothes except woolens and lingerie.

FUZZY Wash

• When you press the START/PAUSE button the light will blink.

Add the laundry and press the START/PAUSE button.

• The appropriate quantity of detergent is marked next to the water

level of WATER-DETERGENT. (Optional step) If desired, add measured bleach or fabric softener to the each dispenser. (Refer to page 9.)

Add the detergent.

• When the lid is open the machine will not operate and an alarm signal will remind you to close the lid.

• Water will be supplied for up to 2 minutes after the start of the wash to supplement the water which the laundry has absorbed.

Close the lid.

Attention

Operating Instructions

PEEDY SOAK Wash

Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty. SPEEDY SOAK mode can be used with FUZZY or JEAN program.

Press the AUTO OFF (POWER) button to turn power on.

Press the PROGRAM button to select the washing program.

SPEEDY SOAK will not work in WOOL and TUB CLEAN, DELICATE, QUICK WASH Program.

Add the Detergent.

• The appropriate quantity of Detergent marked next to

the WATER LEVEL of WATER-DETERGENT.

• The WATER LEVEL and the amount of Detergent to

be used will be shown and water will be supplied.

• Water will be supplied for 2 minutes after the start of the wash to supplement the absorbed water by the laundry.

Add the laundry and press the START/PAUSE button.

Close the lid.

• When the wash program ends, the buzzer will ring for 10seconds before the Power goes off automatically.

Finish

Keep pressing the PROCESS button until the SPEEDY SOAK light is on and then Wash, Rinse, Spin lights are on simultaneously. Until the washing process is completed, the SPEEDY SOAK light is on.

Operating Instructions

AVORITE Wash

Pressing the FAVORITE button allows you to store your FAVORITE wash conditions in the normal cycle memory and then recall it for use at a later time.

Press the AUTO OFF (POWER) button to turn power on.

Select the FAVORITE program.

Select your FAVORITE wash conditions.

Press the START/PAUSE button to store & start your FAVORITE wash cycle. Power turns off automatically after wash.

Note

To recall your FAVORITE cycle.

1. Press POWER on.

2. Select the FAVORITE cycle by pressing the PROGRAM.

3. Press the START/PAUSE button. Then the wash cycle starts.

• Press the WATER TEMP. button to select wash Water Temperature.

• Press the WATER LEVEL button to select WATER LEVEL.

• Press the OPTION to select OPTION.(Extra Rinse, Gentle Spin)

• Press the PROCESS button to select PROCESS(WASH, RINSE, SPIN) respectively you want to store.

Operating Instructions

UB CLEAN

If scrud is allowed to build-up in the machine it can result in stains on your clothes or unpleasant smell in your washer. Scrud is the way build-up that can occur within any washer when the fabric softener comes into contact with Detergent, and according to particular degree of dirtiness or quality of water to be use, in these case, use this program to clean inner tub and outer tub.

• Do not use Detergent box.

• Do not place any laundry inside tub.

• Ex-Large WATER LEVEL is set automatically.

• Left time is displayed.

Press the POWER button to turn power on.

Press the PROGRAM button to select the TUB CLEAN program.

After 10 minutes of water supplement. Add the oxygenated bleach (about 300mL).

Press the START/PAUSE button.

• When the lid is open the machine will not operate, and an alarm signal will remind you to close the lid.

Close the lid.

Note

• Before using this program remove lint inside lint filter.

• When using this program, do not place any laundry inside tub.

• This program takes about 3 hours to be completed.

• After using this program, remove dirt inside filter.

• After finishing this program, open the lid of wash to remove irritant odor.

• Do not pour bleach into the tub directly. It might cause damage the tub.

• Do not leave diluted oxygenated bleach inside tub for long time. It rusts the tub must drain the remained diluted oxygenated water out.

• Use this program once for every month.

• Do not use this program repeatedly.

Additional Function Options

ELAY START (RESER VATION) Wash

DELAY START(RESERVATION) Wash is used to delay the finishing time of the operation. The hours to be delayed can be set by the user accordingly. The time on the display is the finishing time, not the start time.

Press the POWER button to turn power on.

Press the PROGRAM button to select the washing program.

Add the Detergent.

Add the laundry and press the START/PAUSE button.

Press the DELAY START (RESERVATION) button to set the time when the delayed washing is to be completed.

Close the lid.

Select the program for laundry on the Control panel. This program will not work in WOOL and DELICATE, TUB CLEAN Program.

• How to set the delay time.

Example : It’s 7 a.m. now. If you’d like your wash to finish at 9 p.m. set the time as in the figure below. When you push the button the reservation time changes [3

4 5 ...12 14 16 ... 48 3] repeatedly.

• The appropriate quantity of Detergent marked next to the WATER LEVEL of WATER·DETERGENT.

• When the lid is open the machine will not operate, and an alarm signal will remind you to close the lid

• When you press the START/PAUSE button the light will blink.

• Water will be supplied for 2 minutes after the start of the wash to supplement the water the laundry has absorbed.

Finish

• The washing will be finished according to the delayed time.

• If the lid is open, the machine will not work, and an alarm signal will alarm to remind you to close the lid.

• To select washing program, spinning time, WATER LEVEL or HOT/COLD manually, press the DELAY START (RESERVATION) button and select the desired option. Then press the START/PAUSE button.

• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning program . (The laundry will be wrinkled if left for a long time after spinning.)

Note

(RES.=DELAY)

Additional Function Options

ption

Press the POWER button to turn power on.

Press the Option button untill above AIR DRY light is on.

• Turn Power on.

This cause is used to air dry of your laundry and tub dry

ARY DRY

Press the START/PAUSE button.

Gives additional one deep rinse eg.) If you want EXTRA RINSE, you must add fabric softener manually

when indication beep rings in the final rinse. This maximize the fabric softener function.

EXTRA RINSE

■ Select "Air Dry" 30min ➔ Tub Dry

-Use this mode to keep inner tub from getting moldy caused by remaining moisture.

- Do not place any laundry inside tub.

- Use this mode once a week. Caution) For better performance, put drain hose down to the floor so that water inside will be completely drained out.

■ Select"Air Dry" above 1 hour

- Use this mode to reduce the drying time by minimizing remaining moisture on the laundry.

- In general, this is very effective on synthetic items(100% polyester).

- Do place laundry which is evenly distributed(Under 2kg).

- For normal clothes : Select 1 hour

- For synthetic items(100% polyester): Select 2 hours or 3 hours(on some models)

Note

Closed the lid.

Gives GENTLE SPIN instead of normal spin.

GENTLE SPIN

One or more OPTIONS (Extra Rinse, Gentle spin) can be selected for FUZZY and JEAN washing program. Wash program is changed as follows according to selected OPTIONS. “AIR DRY” can be selected, after turning on the power and “AIR DRY” times can be changed by pressing the “OPTION” button.

Additional Function Options

ashing Option

When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually

Press the AUTO OFF (POWER) button to turn power on.

Add the laundry into the washing tub.

Press the START/PAUSE button.

Press the WATER LEVEL button, to control the WATER LEVEL according to the amount of laundry. If you do not choose anything, it is set the Large WATER LEVEL automatically. (reper to p10)

Add the Detergent and close the lid.

• Press the PROCESS button until above Option Washing light is on. (reper to p11)

• When you want to only drain, wait until the water in the washing tub drains completely and then, turn off the power.

• When a Wash, Wash/Rinse or Rinse only option is selected, the water will not be drained off after

the wash is completed.

• If you do not specify the WATER LEVEL, then Medium will be automatically selected.

• If only Rinse is selected, the process will start from Water Supply.

Note

Wash , Wash+Rinse , Rinse , Rinse+Spin , Spin only options

Additional Function Options

ther Useful Functions

Press the POWER button.

Child Lock Function

• Turn Power on.

• After all washing conditions are set according to the manual.

• During the wash program, all the buttons are locked until

washing is completed or until the child- lock function is deactivated manually.

• “ ” and the remaining time will be displayed alternately

in child-lock mode.

How to Lock

Press the START/PAUSE button to start washing.

If you want to unlock during wash, press both the PROCESS and the PROGRAM button simultaneously again.

How to Unlock

Press both the PROCESS button and the PROGRAM button simultaneously.

If you want to lock all the keys to prevent settings from being changed by a child, you can use the child lock option.

Mute Option

If you want to use the washing machine without alarm signal sounds, press both the WATER LEVEL and PROCESS buttons simultaneously. To make buzzer work, press both the WATER LEVEL and PROCESS buttons simultaneously one more time.

Installation Instructions

lacing and Leveling

Check that the machine is level

Open the lid and look from above to see if it is same as shown. Check that the bubble of the level indicator is placed in the center.

Please ensure that transit restraint has been removed before operating your machine.

more than 4”

more than 1”

Place the machine on a flat and firm surface which allows proper clearance.

Concreate flooring is best. Washer should not be installed on rugs or exposed to the weather.

We suggest a minimum clearance of 1” from right and left sides and 4” from rear wall.

Caution

If the washer is installed on a uneven,weak or tilted floor causing excessive vibration, spin failure or “ ” error can happen to it. It must be placed on a firm and level floor to prevent spin failure.

Top view of the machine

Level indicator

Washer with Casters

An insecure installation may cause walking during spin cycles because the washer has casters for convenience to move.

To protect it from walking, place the leg stoppers, which are provided as a accessory, under the two front legs of washer as shown in the figure.

Caster

Leg Stopper

Caution

If the power is supplied from a cord extension set or generator, the cord extension set or electrical portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.

+ 46 hidden pages