LG WS1509XM Owner’s Manual

OWNER’S MANUAL

WASHING MACHINE

Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the washer is installed correctly and safely. Leave these instructions near the washer after installation for future reference.

WS1509*M

MFL48165993

www.lg.com

Made in Korea

Contents

Contents....................................2

Product Features......................3

Important safety instructions

Important safety instructions .................4

Basic safety precautions .......................5

Save these instructions.........................6

Safety instructions for use.....................7

Specifications...........................8

Installation

Removing packing ................................9

Removing transit bolts ..........................9

Installation place requirements ...........10

Connecting water supply hose............12

Installation of drain hose .....................14

Leveling...............................................15

How to use washer

Operating washing machine ...............17

Care before washing...........................18

Washing program table.......................19

Extra options .......................................20

Control panel.......................................21

Additional program..............................22

- Time Delay........................................22

- Turbo Wash™...................................22

- Steam ...............................................22

- Extra Rinse .......................................22

Options ...............................................23

- Wash.................................................23

- Temp. ...............................................23

- Spin ..................................................23

Other functions ...................................23

- Spin Only .........................................23

- Refresh .............................................23

Dry .....................................................24

- Drying Automatic guide ....................24

- Manual Drying time guide ................25

- Completion of Drying .......................25

Child Lock ...........................................26

Tub Clean ...........................................27

Door Lock & Detecting .......................27

Thank you for buying a LG Fully Automatic Washing Machine.

Please read your owner’s manual carefully, it provides instruction on safe installation, use and maintenance. Retain it for future reference.

Record the model and serial number of your washing machine.

Model No.

Serial No.

Date of Purchase

Adding detergent

Adding detergent and fabric softener..28

Maintenance

The water inlet filter.............................30

The drain pump filter ...........................31

Dispenser drawer................................32

The washing drum ..............................33

Cleaning your washer .........................33

Cold conditions ...................................33

Troubleshooting guide

Diagnosing Problems..........................34

Error Messages...................................36

Using Smart Diagnosis™....................37

Terms of warranty ..................38

추가선택 예약

Product Features

Inverter Direct Drive system

The advanced Brushless DC motor directly drives the drum without belt and pulley.

6 Motion

Washer is able to perform various drum actions or a combination of different actions depending on the wash program selected. Combined with a controlled spin speed and the ability of the drum to rotate both left and right, the wash performance of the machine is greatly improved, giving you perfect results every time.

Protection against creases

With the alternating rotation of the drum, creasing is minimized.

Built-in heater

Internal heater automatically heats the water to the best temperature on selected cycles.

More economical with Intelligent Wash system

Intelligent Wash System detects the size of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption.

Child Lock

The Child Lock prevents children from pressing any button to change the settings during operation.

Low noise speed control system

By sensing the amount of load and balance, it evenly distributes load to minimize the spinning noise level.

Auto Restart

Auto Restart allows the program to restart all by itself in case of power failure. It does from the stage where it stopped.

Important safety instructions

READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE.

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

Your Safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION.

These words mean:

DANGER

You will be killed or seriously injured if you don’t immediately follow instructions.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

CAUTION

You may be slightly injured or cause damage to the product if you do not follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Important safety instructions

■ Basic safety precautions

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following:

• Before installation, check exterior damages. If it has, do not install.

• Do not install or store the washer where it will be exposed to the weather.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out.

• Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc.

• The appliance is not intended for use by young children or infirm persons without supervision. Do not allow children to play on, with, or inside this or any other appliance.

• Keep small animals away from the appliance.

• Do not leave the washer door open.

An open door could entice children to hang on the door or crawl inside the washer.

• Never reach into washer while it is moving. Wait until the drum has completely stopped.

• The laundry process can reduce the flame retardant of fabrics.

result, carefully follow the garment manufacturer’s wash and care instructions.

To avoid such a

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may ignite or explode. Oil may

remain in the tub after a whole cycle resulting in fire during drying.

So, do not load oiled clothes.

• Do not slam the washer door closed or try to force the door open when locked. This could result in damage to the

washer.

• When the machine runs high temperature, the front door may be very hot. Don’t touch it.

• To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning.

• When unplugging power cord, do not pull out by grasping the cord.

Otherwise, the power cord may be damaged.

• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

Important safety instructions

■ Basic safety precautions

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following:

• Before discarding an old machine unplug it. Render the plug useless. Cut off the cable directly behind the appliance to prevent misuse.

• When a product was under water, Please call service center.

There is a risk of electric shock and fire.

• Appliance connected to the water mains using new hose-sets. Old hose-sets should not be reused.

• To reduce the risk of personal injury, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety

warnings in this manual could result in property, personal injury or death.

• Do not push down the door excessively, when washer door open.

This could topple over the washer.

• This appliance can be used by

children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Children of less than 3 years should be kept away unless continuously supervised.

WARNING

• A precaution indicates that the hands shall not be inserted into running water-extracting tub.

• A precaution indicates that the washing machine shall not be installed at a humid place.

• A precaution on the washing machine whose lid can be opened during water extraction, that

if it takes 15 s or more for complete stop of water-extraction chamber tub such a case should be understood as a trouble.

■ Save these instructions

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.

• Do not use an adapter this will defeat the grounding plug.

• If you don’t have the proper outlet, consult an electrician.

WARNING

Improper connection of the equipment-grounding conductor can result in electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

Important safety instructions

■ Safety instructions for use

WARNING

To minimize the risk of fire in a tumble dryer, the following should be observed:

• Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in a tumble dryer.

Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard. If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent-this will reduce, but not eliminate, the hazard. The ‘cool down’ cycle of tumble dryers should be used to reduce the temperature of the items. They should not be removed from the tumble dryer or piled or stacked while hot.

• Items that have been previously

cleaned in, washed in, soaked in or spotted with petrol/gasoline, drycleaning solvents or other flammable or explosive substances should not be placed in a tumble dryer.

Highly flammable substances commonly used in domestic environments include acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some brands), turpentine, waxes and was removers.

• Items containing foam rubber (also

known as latex foam) or similarly testured rubber like materials should not be dried in a tumble dryer on a heat setting. Foam rubber materials can, when

heated, produce fire by spontaneous combustion.

• Fabric softeners or similar products should not be used in a tumble dryer to eliminate the effects of static electricity unless this practice is specifically recommended by the manufacturer of the fabric softener or product.

• Undergarments that contain metal

reinforcements should not be placed in a tumble dryer. Damage to the tumble

dryer can result if metal reinforcements come loose during drying. When available a drying rack could be used for such items.

• Plastic articles such as shower caps or

babies waterproof napkin covers should not be placed in a tumble dryer.

• Rubber-backed articles, clothes fitted with foam rubber pads, pillows, galoshes and rubber-coated tennis shoes should not be placed in a tumble dryer.

Specifications

Transit bolts

Drawer

(For detergent and

fabric softener)

Power plug

•

If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or a similarly qualified person in order to avoid a hazard.

Control panel

Drain hose

Door

Drum

Lower cover cap

Drain pump filter

Adjustable feet

Drain plug

■ Name : Front loading washing machine

■ Power supply : 220 V~, 60 Hz

■ Size : 686 mm(W) x 767 mm(D) x 982 mm(H)

■ Weight : 94 kg

■ Wash capacity / Max.Watt : 15 kg (2200 W)

■ Dry capacity / Max.Watt : 9 kg (2150 W)

■ Water consumption : 140



■ Spin speed : Extra Low / Low / Medium / High / Extra High

■ Permissible water pressure : 100 - 1000 kPa (1.0 - 10.0 kgf / cm

■

IP No.(Degree of Protection)

: IPX4

)

The appearance and specifications may vary without notice to improve the quality of the unit.

■

Accessories

Inlet hose (1EA) Spanner Elbow Bracket

(for securing drain

hose)

Non-skid

pads

Caps for covering

shipping bolt

Tie strap

holes

Installation

■ Removing packing

1. Remove the cardboard box and

styrofoam packing.

2. Lift the washing machine and remove

the base packing.

Washer

Spanner

Base Packing

WARNING

• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.

There is a risk of suffocation ! Keep all packaging well away from children.

■ Removing transit bolts

To prevent internal damage during transport, the 4 special bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs. If they are not removed, it may cause heavy vibration, noise and malfunction.

3. Remove the tape securing the power

supply cord and drain hose.

4. Remove the inlet hose from the drum.

NOTE

• Keep the spanner provided for future use.

1. Unscrew the 4 bolts with the spanner

supplied.

2. Take out the 4 bolts along with the

rubber bungs by slightly twisting the bung.

NOTE

• Keep the transit bolts for future use.

3. Close the holes with the caps supplied.

Installation

Washer

approx.

2cm

■ Installation place requirements



Location

• Level floor :

Allowable slope under entire washer is 1˚

• Power outlet :

Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance.

• Additional Clearance :

For Wall, 10cm:rear / 2cm : right & left side Do not place or store laundry products on top of washer at any times. They can damage the finish or controls.



Positioning

• Install the washer on a flat hard floor.

• Make sure that air circulation around the washer is not impeded by carpets, rugs, etc.

• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the washer.

• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm) covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance.

• The washer must not be installed in rooms where the temperature can drop below 0°C.

• Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown.

• With the washer installed, adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable, and a clearance of approximately 20mm is left between the top of the washer and the underside of any work-top.

• This equipment is not designed for maritime use or for use in a mobile installations such as caravans, aircraft etc.



Electrical connection

• Do not use an extension cord or double adapter.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard.

• Always unplug the machine and turn off the water supply after use.

• Connect the machine to an earthed socket in accordance with current wiring regulations.

• The appliance must be positioned so that the plug is easily accessible.

• Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service center

• Do not install your washing machine in rooms where temperature below freezing may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.

• If the appliance is delivered in the winter months and temperatures are below freezing : Place the washing machine at room temperature for a few hours before putting it into operation.

Installation

CAUTION

CAUTION concerning the Power cord

• Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

• Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in an electric shock or fire.

• Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. If the appliance is supplied from a cord extension set or an electrical portable outlet device, The cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.

CAUTION

• The appliance is not intended for use by young children or infirm persons without supervision.

• Young children should be supervised to ensure that they do not play with appliance.

Installation

■ Connecting water supply hose

• Water supply pressure must be between 100 kPa and 1000 kPa (1.0 - 10.0 kgf / cm2).

• Do not strip or crossthread when connecting inlet hose to the valve.

• If the water supply pressure is more than 1000 kPa, a decompression device should be installed.

• Periodically check the condition of the hose and replace the hose if necessary.

Step1 : Check rubber seal inlet hose

• Two rubber seals are supplied with the water inlet hoses. They are used for preventing water leaks.

Hose connector

Rubber seal

Step2 : Connect hose to water tap

Type-A : Connecting Screw-type hose to tap with thread

Make sure the connection to taps is sufficiently tight.

• Screw the hose connector onto water supply tap.

Type-B : Connecting Screw-type hose to tap without thread

Upper connector

Rubber packing

1. Unscrew the adapter ring plate and the 4

adapter retaining screws.

2. Push the adapter onto the end of the tap

so that the rubber seal forms a watertight

Fixing screw

connection. Tighten the adapter ring plate and the 4 screws.

3. Push the water supply hose vertically

upwards so that the rubber packing within

Plate

Water supply hose

the hose can adhere completely to the tap and then tighten it by screwing it to the right.

Installation

Type-C : Connecting one touch type hose to tap without thread

1. Unscrew the adapter ring plate and

the 4 adapter retaining screws.

Ring plate

Guide plate

Latch plate

2. Remove the guide plate if the tap is

too large to fit the adapter.

3. Push the adapter onto the end of

the tap so that the rubber seal forms a watertight connection. Tighten the adapter ring plate and the 4 screws.

4. Pull the connector latch plate down,

push the inlet hose onto the adapter, and release the connector latch plate. Make sure the adapter locks into place.

NOTE

• After connecting inlet hose to water tap, turn on the water tap to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket, and check the water temperature.



Step3: Connect hose to washer

• Make sure that there are no kinks in the hose and that they are not crushed.

NOTE

• After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.

Please use the horizontal tap

Horizontal tap Extension tap Square tap

Installation

 Installation of drain hose

• The drain hose should not be placed higher than 100 cm above the floor. Water in the washer does not drain or drains slowly.

• Securing the drain hose correctly will protect the floor from damage due to water leakage.

• If the drain hose is too long, do not force back into the washer. This will cause abnormal noise.

• When installing the drain hose to a sink, secure it tightly with string.

• Securing the drain hose correctly will protect the floor from damage due to water leakage.

Laundry tub

max. 100 cm

Hose

Retainer

max. 100 cm

Tie strap

Installation

■ Leveling

Raise Lower

Lock Nut

Tighten all 4 locknuts securely

1. Leveling the washing machine properly

prevents excessive noise and vibration. Install the appliance on a solid and level floor surface, preferably in a corner of the room.

NOTE

• Timber or suspended type flooring may contribute to excessive vibration and unbalance.

2. If the floor is uneven, turn the adjustable feet

as required. (do not insert pieces of wood etc. under the feet) Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level. (use a spirit level)

Once the washer is level, tighten the lock

• nuts up towards the base of the washer. All lock nuts must be tightened.

Diagonal Check

• When pushing down the edges of the washing machine top plate diagonally, the machine should not move up and down at all (Please, check both directions). If machine rocks when pushing the machine top plate diagonally, adjust the feet again.

NOTE

• If the washing machine is installed on a raised platform, it must be securely fastened in order to eliminate the risk of falling off.

Installation



Concrete floors

• The installation surface must be clean, dry and level.

• Install washer on a flat hard floor.



Tile floors (Slippery floors)

• Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into

70x70 mm sections and stick the pieces on to the dry tile where machine is to be placed.)

• Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.



Wooden floors (Suspended floors)

Wooden floors are particularly susceptible to vibration.

•

To prevent vibration we recommend you place rubber cups under

•

each foot under washer at least 15mm thick, secured to at least

2 floor beams with screws.

If possible install the washer in one of the corners of the room, where the floor is more stable.

•

Fit the rubber cups to reduce vibration.

•

You can obtain the rubber cups (4620ER4002B) from the LG spares dept.

Rubber Cup

NOTE

• Proper placement and leveling of the washer will ensure long, regular and reliable

operation.

• The washer must be 100% horizontal and stand firmly in position.

• It must not “Seesaw” across corners under load.

• The installation surface must be clean, free from floor wax and other lubricant coatings.

• Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.

How to use washer

 Operating washing machine

1. Sort Laundry.

(Refer to 18 page)

2. Open the door and load laundry.

3. Press the Power button.

4. Select a Program. (Refer to 19~20 page)

Select options at this time (Refer to 22~27 page)

■ Additional Program

■ Options

■ Other functions

■ Dry

■ Child Lock

■ Tub Clean

■ Door Lock

5. Add detergent.

(Refer to 28~29 page)

6. Press the Start/Pause button.

How to use washer

■ Care before washing

Wash temperature

Normal machine wash

Permanent press

Hand wash

Sort laundry by...

Soiling

Colour

Delicate

Do not wash

Wash temperature

Fabric type

1. Care Labels

Look for a care label on your clothes. This will tell you about the fabric content of your garment and how it should be washed.

2. Sorting

To get the best results, sort clothes into loads that can be washed with the same wash cycle. Water temperature and spin speed and different fabrics need to be washed in different ways. Always sort dark colors from pale colors and whites. Wash separately as dye and lint transfer can occur causing discolouration of white etc. If possible, do not wash heavily soiled items with lightly soiled one.

• Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.

• Color (White, Lights, Darks) Separate white fabrics from colored fabrics.

• Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately.

3. Caring before loading

Combine large and small items in a load. Load large items first. Large items should not be more than half the total wash load. Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.

• Check all pockets to make sure that they are empty. Items such as nails, hair clip, matches, pens, coins and keys can damage both your washer and your clothes.

• Close zippers, hooks and strings to make sure that these items don’t snag on other clothes.

• Pre treat dirt and stains by brushing a little detergent dissolved in water onto stains like collars and cuffs to help lift dirt.

• Check the folds of the flexible gasket (gray) and remove any small articles.

• Check inside of the drum and remove any item from a previous wash.

• Remove any clothing or items from the flexible gasket to prevent clothing and gasket damage.

NOTE

• Before the first wash, select a cycle (Cotton 60°C, add a half load of detergent) allow the unit to wash without clothing. This will remove residues and water from the drum that may have been left during manufacturing.

How to use washer

 Washing program table

•

Recommended courses according to the laundry type.

Program

Cotton

Allergy

Care

Rinse+

Spin

Refresh

Duvet

Cold

Wash

Bedding

Care

Wool

Speed

Wash

Description

Provides better performance by combining various drum motions.

Removes allergens such as house mites, pollen, and cat fur.

Rinse and Spin

Removes wrinkles within 20mins with steam.

This cycle is for large items such as bed cover, pillows, sofa covers, etc.

Low power washing

This cycle provides Fresh bedding. The only feature that eliminates odors and moisture air without water washing.

Enables to wash wool fabrics. (Please use detergent for machinewashable woolens).

This cycle provides fast washing time for small loads and lightly soiled clothes.

Color fast garments (shirts, nightdresses, pajamas, etc) and normally soiled cotton load (underwear).

Cotton, underwear, pillow covers, bed sheets, baby wear.

Color fast garments (shirts, nightdresses, pajamas, etc) and normally soiled cotton load (underwear).

Cotton mixed, Polyester mixed Dress shirts, blouses.

Cotton bedding except special garments (delicates, wool, silk, etc.) with filling: duvets, pillows, blankets, sofa covers with light filling.

Cotton, underwear, pillow covers, bed sheets

Large items such as blanket and comforters

Machine washable woolens with pure new wool only.

Colored laundry which is lightly soiled fast.

Fabric type

Proper Temp.

40°C

(Cold to 95°C)

Cold

(Cold to 40°C)

Cold

40°C

(Cold to 40°C)

* 40°C

(Cold to 40°C)

Maximum

Load

Rating

4.5 kg

Rating

3 items

1 single

size

Rating

Fresh

bedding

3.0 kg

Proper temperature can be selected after deleting the steam option, automatically-included in the cycle.

How to use washer

• Water Temperature: Select water temperature to suit wash cycles. Always follow garment manufacture’s care label or instructions when washing.

NOTE

• Neutral detergent is recommended.

• The wool cycle features gentle tumbling and low-speed spin for garment care.

 Extra options

Cup

Board

Dry

Time

Dry

Turbo

wash

Program

Cotton

Duvet

Allergy Care

Refresh

Wool

Speed Wash

Rinse + Spin

Cold Wash

Bedding Care

Tub Clean

Time

Delay

Steam

Extra Rinse

* : This option is automatically included in the cycle.

According to the selected course, the available options may be different.

How to use washer

■ Control panel

Smart Diagnosis™ function is available only for the products with a Smart Diagnosis™ mark.

Power

button

Program

dial

Start/Pause

button

Power

• Press the Power button to turn power on and off.

• To cancel the Time Delay function, the power button should be pressed.

Additional program

buttons

LED

display

Option

buttons

Additional program

• Use these buttons to select the desired cycle options for the selected cycle.

Program dial

• Programs are available according to the laundry type.

• Lamp will light up to indicate selected program.

Start/Pause

• This Start/Pause button is used to start wash cycle or pause the wash cycle.

• If temporary stop of wash cycle is needed, press the Start/Pause button.

LED display

• The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle.

Options

• This allows you to select an additional cycle and will light when selected.

How to use washer

■ Additional program

Time Delay

You can set a time delay so that the washing machine will start automatically and ﬁnish after a speciﬁed time interval.

NOTE

• The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash load and other factors.

1. Press the Power button.

2. Select a cycle.

3. Press the Time Delay button and set time

required.

4. Press the Start/Pause button.

Turbo Wash“

• Adding the Turbo Wash™ option to normal cycles reduces cycle time while providing the same wash performance.

• The option uses the Twin Spray and Optimization features of the washer to save time without sacrificing performance.

Steam

Steam Wash features enhance washing performance with low energy consumption. Refresh cycle reduces creases in clothes.

1. Press the Power button.

2. Select steam course.

3. Press the Steam button.

4. Press the Start/Pause button.

Steam Wash

• For heavily stained clothes, underwear, or baby clothes.

• Refresh cycle is always Steam Wash.

• Do not use Steam Wash for delicates such as wool, silk, and easily discoloured clothes.

Extra Rinse

• Used to additional rinse, which may assist in

removing traces of detergent residue.

• By selecting Extra Rinse function, the Rinse

Time and the Rinse water are increased.

How to use washer

■ Options ■ Other functions

Wash

• Time Save : This option can be used to

reduce the time of a wash program.

• Intensive : If the laundry is normal and

heavily soiled, “Intensive” option is effective.

• Soak : This option can be used to wash

normal clothes or thick and heavy clothes which are excessively dirty.

• Pre Wash : If the laundry is heavily soiled,

“Pre Wash” course is effective.

Temp.

• By Pressing the Temp. button the water temperature can be selected.

- Cold

- 30°C, 40°C, 60°C, 95°C

• Water temperature can be selected according to the program.

Spin

• Spin Speed level can be selected by pressing 'Spin' button repeatedly.

Spin only

1. Press the Power button.

2. Press the Spin button to select Spin Speed.

3. Press the Start/Pause.

Refresh

1. Press the Power button.

2. Select the Refresh program.

3. Press the Start/Pause button.

How to use washer

■ Dry

NOTE

• The maximum drying capacity for this model is 9 kg. When loading, please use the maximum drying capacity indicator behind the door as shown below.

• Do not overload above the maximum drying capacity indicator. Items must be able to tumble freely.

• This washer-dryer’s automatic process from washing to drying can be selected easily.

• For most even drying , make sure all articles in the clothes load are similar in material and thickness.

• By pressing the button you want, the drying course can be select.

Drying Automatic guide

• Use your Automatic Cycles to dry most loads. Electronic sensors measures the temperature of the exhaust to increase or decrease drying temperatures for faster reaction time and tighter temperature control.

• Recommend Automatic drying course for clothes type.

- Cup Board Dry : Will dry clothes enough

to be removed and folded, ideal for everyday clothes such as cottons.

NOTE

• The estimated drying time varies from the actual drying time when in the Automatic mode. The type of fabric, size of the load, and the dryness selected, do affect the drying times.

The standard laundry weight which shows how much laundry to put into the washer.

+ 56 hidden pages