LG WP-900RP Owner’s Manual

WP-900RP

25.5

SAFETY MEASURE

WARNING

	Do not treat the power
	supply cord with your
	wet hand. It may cause
It may cause electric shock.	electric shock.

Be sure to earth the washer to prevent electric shock. To reduce the risk of electric shock, do not install the washer in humid space.

Please read this manual carefully before operating

your set. Retain it for future reference.

MODEL : WP-900RP

MFL68505525

P/No. : MFL68505525

*For Pump Model Only*

DRAIN HOSE

Detergent Box

(TUB)

1

3

4

5

6

2

Water Supply Inlet

Select the desired time for spinning. The maximum limit is 5 min, but shall not be continued over 3 cycle. Don't rotate the knob more than prescribed limit.

** After 3 times continuous spinning, please stop spinning more than 1 hour, otherwise the spin motor may be damaged or fire or stop operation.

Wash after separating oiled or dyed clothing.

right

Connecting the earth wire (only for models with two prong plug)

If grounding methods as
described are not possible,
a seperate circuit-breaker
should be employed and
installed by a qualified
electrician.
	Off
	’t
on te
D	ta
Ro
15	3
12	6
L <= 1 m.	9
L

Interim spin rinse

Set the desired
water flow and	1	Woolen
5
spin time
appropriately.	2
4
	3
	Spin

If the spinning fail to stop when the spin dryer cover is opened, the brake is out of order. Immediately stop using the machine and request repair service.

	Type of Fabric	Wash	Wash	Water	Amount of	Amount of	Amount of
		Selector	Time	Level	Laundry(kg)	Water (Ltr)	Detergent (gms)
	Woollen, Knits	GENTLE	~5 min.	H	0.5~1.2	60	60~70
	Synthetics, Silk			L	0.5~4.0	50	45~51
		GENTLE	~5 min.	M	4.0~4.6	55	54~58
				H	4.6~6.5	60	60~70
				L	0.5~4.0	50	45~51
	Cotton, Linen	NORMAL	5~10 min.	M	4.0~4.6	55	54~58
				H	4.6~6.5	60	60~70
	Very soiled cotton			L	0.5~4.0	50	45~51
		STRONG	10~15 min.	M	4.0~4.6	55	54~58
	and linen
				H	4.6~6.5	60	60~70

Notes :

•Amount of laundry is a weight of dry laundry.

•Detergent is a general synthetic detergent.

CAUTION : Fill in wash to height 20mm above the level you desire. When washing starts water level will automatically come to level you desire.

Water does not enter washer Is the water faucet hooked up? Is the water faucet frozen?

Is there lint stuck in the plunger valve?

Is the drain pump operated?

Is the drain hose twisted?