Washing Machine
OWNER'S MANUAL
MODEL :
WP-9030/9031/9220
WP-9032/9033/770/9224
WP-951S/1020/1021S
WP-1220/1221S
WP-9521/9526S
WP-9250/9251/9256
WP-90050/92082
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
This washing machine is designed and manufactured for
household use only.
P/No.: MFL33753001
CONTENTS
IMPORTANT INSTRUCTIONS --------------------------------------------5
SAFETY MEASURE ----------------------------------------------------------6
PARTS IDENTIFICATION -----------------------------------------------7~8
INSTALLATION-----------------------------------------------------------9~10
PREPARATIONS BEFORE WASHING --------------------------------11
HOW TO WASH--------------------------------------------------------------12
HOW TO RINSE---------------------------------------------------------13~14
HOW TO SPIN----------------------------------------------------------------14
AFTER FINISHING ---------------------------------------------------------14
REFERENCE-----------------------------------------------------------------15
CARE AND MAINTENANCE-----------------------------------------16~17
TROUBLESHOOTING GUIDE -------------------------------------------17
SPECIFICATIONS ----------------------------------------------------------18
3
IMPORTANT INSTRUCTIONS
1. Before operating machine read the instruction manual
carefully.
2. Always keep the machine on the floor level.
3. During operation machine should be kept perpendicular to
the slope of the floor to avoid motion.
4. Before operating properly earth the machine, to avoid
electric shock.
5. When not in use take the power cord out from the socket.
6. During spinning and drain check that drain hose is
lowered.
7. Before putting clothes in the Wash Tub check the pockets
thoroughly for Coins, Keys and other objects.
8. Transfer the clothes from Wash Tub to Spin Dryer Basket
one by one.
9. In case you notice excessive vibration or abnormal noise
during spinning, immediately open the Spin Dryer Cover
and rearrange the laundry evenly.
10. In case of any doubt contact the nearest service center or
Dealer.
5
SAFETY MEASURE
Manufacturer is not responsible for accidents caused by the user as a result of not
following the user’s guide.
WARNING
In Operation
l Do not insert the
hand inside the spin
dryer basket while
the machine is in
operation.
(Do not let children
climb on the machine
or climb into the tub.
Injury may occur)
Installation Area
l Avoid area exposed
to snow, rain, or
where humidity is
high. It may cause
electric shock.
Switch Area
l Avoid watering on the
switch area. It may
cause electric shock
or fire.
Volatile Material
l Do not use volatile material
s uc h a s B e n z e n e ,
Gasoline, bug killer. Do not
le a ve str o ng alka line
substance such as bleach
inside the tub. Damage on
plastic surface and rubber
parts may occur.
Electric Outlet
l Avoi d conne cting
s e v e ra l e le c tr i c
devices to s ingle
outlet. It may cause
fire.
Heat
l Avoid electric heater,
candle light, cigarette
light, bug smoker, etc.
near the machine. It may
ignite or deform plastic
part
Power Cord
l If the power supply cord is damaged, it must only be replaced by a repair shop
appointed by the manufacturer, because special purpose tools are required.
Hot Water
l Avoid using hot water
ove r 50°C. It m a y
deform plastic parts or
cause malfunction.
Power Cord
l Do not treat the power
supply cord with your
wet hand
Installation
l Install the washing machine
on a horizontal support.
Otherwise, it may cause
vibration and noise
l Plug out the power supply
cord, when cleaning or not
using the washing machine
for a long time.
6
PARTS IDENTIFICATION
Control Panel
WP-9030
WP-9031
WP-9220
WP-90050
4
1 2
Water Selector
6 7
3
WP-9032
WP-9033
WP-770
WP-9224
WP-951S
WP-1020
WP-1021S
WP-1220
WP-1221S
WP-9521
WP-9526S
WP-9250
WP-9251
WP-9256
WP-92082
1.
Hot water inlet
Select this inlet when opting for hot water wash.
2.
Cold Water inlet
Select this inlet when opting cold water wash.
3.
Water Selector
Select "WASH" to supply water for washing and rinsing and
"SPIN" for spin shower rinse.
4.
Wash Timer
Select the desired time for soaking, washing or rinsing.
(Soaking facility is not available in WP-770/9030/9031/
WP-9220/9224/9521/9032/1020/1220/9250/9251/90050/92082)
4
Off
5
40
10
15
4
5
Off
5
40
10
15
4 5 1 2
Off
5
40
10
15
5
1 2
Hot Cold
Water Selector
6 7
3
7
1 2
6
3
6 7
3
5.
Wash Selector
Set the Selector to "GENTLE", "NORMAL", "STRONG"
according to kinds and quantity of the laundry.
6.
Drain Selector
Select "WASH RINSE" for washing and rinsing, and
"DRAIN" to drain the water from the tub.
7.
Spin Timer
Select the desired time for spinning. The max. limit is 5 min.
Don't rotate the knob more than prescribed limit.
(Please do not match this figure with model as it may be different from your model. These are schematic diagrams only.)
7
PARTS IDENTIFICATION
Accessories
Inlet Hose
WASHING
COVER
OVER FLOW
FILTER
ROTATION
FILTER-C
COLLAR
SCRUBBER
TUB
PULSATOR*
SPIN DRYER
COVER
SAFETY
COVER-2
Safety Cover
PANEL
SPIN DRYER
BASKET
EARTH WIRE
(For models with
two prong plug)
SAFETY
COVER-1
POWER CORD
( Please do not match this figure with model as it may be different from your model. These are schematic diagrams only.)
Wash Timer (Only for WP-9033/951S/1021S/1221S/9526S/9256 exists with soak option )
The wash timer can be used for SOAK, WASH and RINSE operations.
Following combinations can be selected.
a) Soak + Wash : Select the desired soak time by setting the timer between
Off
5
40
Wash Timer
15~40 min. Then total wash time will be selected soak time + 15 min. of wash
time.
10
b) Wash/Rinse : Any Wash/Rinse time 1~15 min. can be selected by setting the
15
timer between 1~15 min.
Washing will take place for the set period, then machine stops automatically.
Soak Function
a) Soaking is provided for better cleaning of clothes as detergent water
goes to inner pores of clothes resulting dirt removal in better way.
b) Soak time by default will be 25 min. so total time of cycle will be
Soak + Wash time (25 min. + wash time)
c) In soak option, machine operates for 1.5 min. & remains off for 5 min. This
cycle continues for selected soak time.
8
INSTALLATION
Installation area
l Select flat and firm floor.
l Maintain more than 10 cm gap
between the side of drain hose
l Incorrect installation may cause severe noise and
and the wall.
break down.
l The base openings must not be obstructed by
carpeting when the washing machine is installed
on a carpeted floor.
Drain Hose Installation
l Drain Hose is installed at
back side of the washing
machine.
Notes
l Be sure to re-route the hose so that it is not kinked or has sharp bends which will
prevent proper drainage.
l The level of the drain should be slightly lower than the lowest part of the washing
machine in order to ensure proper and complete drainage.
l Use only new hose set provided with the machine.
l Don’t remove Drain Hose.
9
INSTALLATION
Connecting the earth wire
l Install the earth wire to prevent short-circuit due to leaking current and electric shock.
l It is attached at the back of the washer. Connect it to the metal water pipe. If the water
pipe is made of plastic, it does not have the earth effect.
Earth
wire
Gas pipe
1
2
4
3
5
7
6
8
9
0
l Never connect the earth wire to the gas
pipe, lightning arrester, telephone
connector etc.
¬ WARNING : This appliance must be earthed .
Other earthing method
l After connecting the
earth wire to the earth
l Connect to the earthing-
only outlet.
copper plate, bury it at
least 75 cm deep under
the wet ground.
Earth
wire
Earth
wire
Earth copper plate
75cm
Connecting the power plug
l Insert the power plug into the outlet.
l Before connecting the power plug, check if the
voltage setting of the machine matches the outlet
voltage.
l If AC outlet with ground terminal is used,
grounding is not needed. If not, never forget
earthing (earthing method above).
10
l When installing it in an
area where earthing is
not possible, purchase
a short-circuit breaker
(15mA at op eration,
7.5mA at idle ) an d
connect it to the outlet.
Short-circuit breaker
Ground terminal
PREPARATION BEFORE WASHING
Preparation
n Connect the water supply hose
to the water supply inlet.
n Set the supply selector lever
to “WASH” for washing and
rinsing to “SPIN” for interim
spin rinse.
l Note : The water Selector
lever should not be placed
near the center (as shown in
Fig. (A) otherwise water
flows to the wash and spin tub
simultaneously).
Before washing
Check the washing
1
instruc-tions labels
on the clothing to be
washed.
Remove any objects from the
2
pockets of the clothing. Object left in
the pockets may damage the
clothing or wa sh in g ma ch ine
(especially cause clogging of the
drain hose).
(Fig. A)
n Inlet hose
n C o n n ec t t h e
power cord to the
electrical outlet.
n Drain Hose
l Lay down the drain hose.
Keep the drain hose
flipped d o w n whi l e
washing is in process
After separat-
3
ing an oiled or
dyed laundry,
wash.
HOW TO WASH
Set the drain selector to
1
“ W A S H l RI N S E”
position.
DRAIN SELECTOR
Set the water
2
s e l ec to r t o
“WASH”.
WASH
WATER SELECTOR
11
Open the water tap and fill water
3
in the wash tub about halfway to
the desired water level.
HOW TO WASH
Put the appropriate amount
4
of detergent and the laundry
into the wash tub. And add
water to the desired water
level.
l Re fer t o T A B L E S f o r
REFERENCE on page 15.
Set the desired wash time.
6
Off
40
WASH TIMER
(For WP-9033/
WP-951S/1021S
WP-1221S/9526S
WP-9256)
l Refer to TABLE for REFERENCE on
5
10
15
(For WP-9030/9031/9032/
WASH TIMER
WP-770/1020/1220
WP-9250/9251)
WP-9521/9220/9224
WP-90050/92082
page 15 for information on how to
select the appropriate washing time.
Select the wash selector to
5
" G E NT L E ", " NO RM AL "
"STRONG" according to kinds
and quantity of the laundry.
(Not available in
WP-9030/9031/9220/90050)
WASH SELECTOR
l R e fe r t o T A B L E S f o r
REFERENCE on page 15.
When washing is finished, select the
7
drain selector to “DRAIN” position and
drain the water out.
DRAIN SELECTOR
8
Spinning in the spin dryer basket :
l Put the laundry into the spin dryer
basket.
l Put the laundry down lightly.
l Place the safety cover horizontally
on the laundry.
l Set the desired spin time with the
spin timer.
12
HOW TO RINSE
Interim spin rinse
n Interim spin rinse prior to regular rinsing will remove sudsy water from the laundry and
improve rinsing efficiency.
After washing
1
l Put the laundry into
the spin dryer basket.
l P lace the saf e t y
cover hori-zontally
on the laundry.
Set the water selector to
2
“SPIN”.
Allow the water to flow
3
appropriately.
Turn off the water supply,
4
close the safety cover-2
and spin dryer cover.
SPIN
WATER SELECTOR
Set the desired spin
5
time with the spin
timer.
After spinning
6
l Put the laundry into
the wash tub and
rinse.
Economical water supply rinse
n This course allows you to save water as this course is to rinse after feeding appropriate
water to the tub.
Set the drain selector to
1
“ W A S H l R I N S E ”
p o s i ti o n a n d f e ed
appropriate water to the
tub.
Set the rinse time with the
2
wash timer.
Off
5
40
10
15
Put the laundry into the
3
spin dryer basket and set
the spin time with the spin
timer.
WASH
Water Selector Drain Selector Spin Timer
Put the laundry into the wash tub and repeat 1 to 3 course
4
WASH TIMER
(For WP-9033/
WP-951S/1021S
WP-1221S/9526S
WP-9256)
WASH TIMER
(For WP-9030/9031/9032/
WP-770/1020/1220
WP-9250/9251)
WP-9521/9220/9224
WP-90050/92082
13
HOW TO RINSE
Continuous water supply rinse
n The course is to rinse while feeding water continuously
Set the drain selector to
1
“ W A S H l R I N SE ”
position.
WASH
Water Selector Drain Selector
Put the laundry into the
2
wash tub and open the
water faucet.
HOW TO SPIN
Set the rinse time with the
3
wash timer and feed
wa t e r c o n t in u o us l y .
Off
5
40
10
15
WASH TIMER
(For WP-9033/
WP-951S/1021S
WP-1221S/9526S
WP-9256)
WASH TIMER
(For WP-9030/9031/9032/
WP-770/1020/1220
WP-9250/9251)
WP-9521/9220/9224
WP-90050/92082
1. Put the laundry evenly into the spin dryer basket.
Safety cover
2. Put the laundry down lightly.
3. Place the safety cover horizontally on the top of
the laundry.
4. Close the spin dryer cover.
5. Set the spin timer according to the following table.
SPIN TIME GUIDE
Type of clothing
Thin fabrics (synthetic fabrics, mixed fabrics)
Sweaters (synthetic fabrics)
Cotton underwear
Sheets, towels
l If the spin dryer basket is off-balance and vibrates excessively, stop the spinning,
rearrange the clothes evenly, and then resume spinning.
l If the spinning fail to stop when the spin dryer cover is opened, the brake is out of
order. Immediately stop using the machine and request repair service.
CAUTION : For woollen clothes, spin for 1 min. only for clothes protection.
Spin Time
1 minute
1~3 minutes
3~5 minutes
5 minutes
AFTER FINISHING
1. Remove the laundry from the spin dryer basket and close
the spin dryer cover
2. If there is water in the wash tub, set the drain selector to
“DRAIN” in order to drain it out.
3. Disconnect the power cord from the electrical outlet.
4. Clean the washing machine. (Refer to CARE AND
MAINTENANCE on page 16~17).
14
REFERENCE
TABLE 1. WEIGHT GUIDE FOR CLOTHES
Type of Clothing Type of Fabric Weight Per Piece
Under shirt
Handkerchief
Bath towel
Shirt
Socks (1 pair)
Pajama (shirt and pants)
Winter undershirt
Workclothes
Blouse
TABLE 2. GUIDE FOR WASHING
Type of Fabric
Synthetics, Silk, Woolen, Knits
Cotton, Linen
Very soiled cotton and linen
TABLE 3. GUIDE FOR WASHING (WITHOUT SOAK)
Type of Fabric
Woollen, Knits Gentle
Synthetics, Silk
Cotton, Linen
Very soiled cotton and linen
GENTLE
NORMAL
STRONG
TABLE 4. GUIDE FOR WASHING (WITH SOAK)
Type of Fabric
Soiled
Synthetics, Silk
Soiled
Cotton, Linen
Worst Condition
Very soiled cotton and linen
Wash
Selector
Soak-Gentle
Soak-Normal
Soak-Strong
Cotton
Cotton
Cotton
Mixed fabric
Mixed fabric
Cotton
Woollen
Mixed fabric
Mixed fabric
**(A=WP-9030/9031/9220/90050)
Wash
Time
2~5 min.
5~10 min.
10~15 min.
Water
Level
**(A=WP-9032/770/9521/9224/9250/9251/92082 C=WP-1020/1220)
Wash
Wash
Water
Selector
Time
~5 min.
8~12 min.
12~15 min.
12~15 min.
Amount of Water (Ltr)
Level
A** B** C** A** B** C**
H
50
L
40
M
45
H
50
L
40
M
45
H
50
L
40
M
45
H
50
** (A=WP-9033/9526S/9256 C=WP-951S/1021S/1221S)
Wash
Water
Time
15+15 min.
20+15 min.
25+15 min.
Amount of Water (Ltr)
Level
A** B** C** A** B** C**
L
40
M
45
H
50
L
40
M
45
H
50
L
40
M
45
H
50
Notes :
l Amount of laundry is a weight of dry laundry.
l Detergent is a general synthetic detergent.
CAUTION : Fill in wash to height 20mm above the level you desire. When washing will
start water level will automatically come to level you desire.
15
of Water (Ltr.)
62
47
54
62
47
54
62
47
54
62
47
54
62
47
54
62
47
54
62
150 g
50 g
300 g
200 g
50 g
500 g
600 g
800 g
200 g
Amount
B** B**
47
54
62
47
54
62
47
54
62
Amount of Detergent (gms)
66
60~66
51
45~51
58
54~58
66
60~66
51
45~51
58
54~58
66
60~68
51
45~51
58
54~58
66
60~66
Amount of Detergent (gms)
51
45~51
58
54~58
66
60~66
51
45~51
58
54~58
66
60~66
51
45~51
58
54~58
66
60~66
Amount of
Detergent(gms)
56~66
45~49
51~55
56~66
45~49
51~55
56~66
45~49
51~55
56~66
45~51
54~58
60~66
45~51
54~58
60~66
45~51
54~58
60~66
60~72
45~51
54~58
60~72
45~51
54~58
60~72
45~51
54~58
60~72
45~51
54~58
60~72
45~51
54~58
60~72
45~51
54~58
60~72
CARE AND MAINTENANCE
l Be sure to disconnect the power cord from the electric outlet before starting care and
maintenance.
Washing machine
n If the washing machine itself becomes dirty
l The washing machine can be cleaned with a mild liquid detergent. Never use abrasive
cleaner or chemicals such as benzene or thinner to clean the washing machine,
because these materials will damage both the painted surfaces and the plastic parts.
Pulsator
n If a button or some other object gets caught in the pulsator.
1. Take out the pulsator cap with “-” type driver. (Fig. a)
2. Use a screwdriver to loosen the screw in the center of the
pulsator and lift the pulsator straight up in order to remove the
button or other object. (Fig.b)
3. Replace the pulsator and tighten the screw.
4. Replace the pulsator cap.
Overflow filter & Rotation filter-C
1 2 3
Fig. a
Fig. b
Lift up the area A of the overflow filter.
Take out the rotation filter-C by
pulling in direction shown.
Pull the overflow filter forward from
the wash tub in the direction of the
arrow.
Turn the net over and rinse in wat er.
4 5 6
Use a brush or your hand to remove all
of the lints which has adhered to the
overflow filter.
If only rotation filter-C need washing, proceed the process 1 > 3 > 6 on the upper figure.
Insert the overflow filter back into the
wash tub.
16
Insert the rotation filter-C back
into the overflow filter.
CARE AND MAINTENANCE
Spin dryer basket
n If clothing becomes trapped between the spin dryer basket and the spin tub.
1. Unscrew the screw at the left corner in the safety cover-1.
2. Take hold of the front of the safety cover-1
3. Pull the tub by the other hand.
4. Pull the safety cover-1 upward.
5. Remove the article of clothing.
6. Close the safety cover-1, pressing down on it so that it fits securely into the spin tub.
7. Tighten the screw at the left corner in the safety cover-1.
Safety cover -1
Tub
TROUBLESHOOTING GUIDE
Before requesting service
Troubles Checking points
Motor does not operate
Spin dryer basket does not operate
Water does not enter washer
No draining
• Is the power cord firmly plugged in ?
• Is a household fuse blown ?
• Is the timer turned to a suitable point except "OFF"?
• Is the wash selector set to a suitable position except "OFF" ? (wash motor)
• Is the "START/PAUSE" button pressed ?
• Is there any cloth dropped between the basket and tub?
• Is the spin dryer cover closed?
• Is the water faucet hooked up?
• Is the water faucet frozen?
• Is the drain hose laid down?
• Is the drain hose twisted?
• Is the threshold higher?
17
WIRING DIAGRAM
WASH TIMER
BK
BK
BK(BK/BL)
DOOR
S/W
T2
OR/WH
SPIN
TIMER
GY
BK/YL
SPIN
MOTOR
WH(RD)(BR)
WH
GN(GN/YL)
For WP-9030/9031/9032/770
WP-9220/9224
WP-1020/1220
WP-9250/9251/9521/92082
WASH
MOTOR
T1
OR
BUZZER
WH
YL
RD
DOOR
S/W
BK
BK(BK/BL)BL
WH(RD)(BR)
GN(GN/YL)
BK
T2
OR/WH
SPIN
TIMER
GY
BK/YL
SPIN
MOTOR
WH
WH
For WP-9033/951S
WP-1021S/1221S/
WP-9256/9526S
WASH TIMER
T.M
WASH
MOTOR
T1
VL
WH
BUZZER
YL
RD
WH
SPECIFICATIONS
WP-9030/9031/9032/9033/770/9220/9224/90050
Power Source
Water level
Water Pressure
Dimensions
Weight (net)
WP-951S/1020/1021S/1220*/1221S*
Power Source
Water level
Water Pressure
Dimensions
Weight (net)
*Dimensions
*Weight (net)
WP-9521/9526S/9250/9251/9256/92082
Power Source
Water level
Water Pressure
Dimensions
Weight (net)
On Specification Label
High : 50 l
Less than 1,00kPa (1kgf/cm )
775 x 467 x 941 mm (W x D x H)
27.0 kg
On Specification Label
High : 66 l
Less than 100kPa (1kgf/cm )
810 x 490 x 991 mm (W x D x H)
30.5 kg
810 x 490 x 1001 mm (W x D x H)
31.0 kg
On Specification Label
High : 50 l
Less than 100kPa (1kgf/cm )
775 x 467 x 964 mm (W x D x H)
28.0 kg
DOOR
S/W
BK
GY
BK(BK/BL)
SPIN
MOTOR
WH (RD)(BR)
GN(YL/GN)
For WP-9030/9031/90050
(Without Buzzer)
2
2
2
OR/WH
SPIN
TIMER
BK/YL
BK
WASH
TIMER
YL
RD
WASH
MOTOR
WH
18
LG Electronics
Loading...