GUIDANCE FOR SAFETY AND DURABILITY |
..........................3 |
PARTS IDENTIFICATION...................................................... |
4~5 |
SPECIFICATIONS ..................................................................... |
5 |
INSTALLATION...................................................................... |
6~8 |
PREPARATIONS BEFORE WASHING ..................................... |
9 |
HOW TO WASH ....................................................................... |
10 |
HOW TO RINSE................................................................. |
11~12 |
CARE AND MAINTENANCE.............................................. |
13~14 |
REFERENCE ........................................................................... |
15 |
TROUBLESHOOTING GUIDE ................................................. |
15 |
2
P/No.3828FW3144A
Manufacturer is not responsible for accidents caused by the user as a result of not
following the user's guide.
In Operation |
Installation Area |
Do not insert hand inside the spin dryer bas- |
Avoid installing the machine exposed to |
ket while the machine is in operation. |
snow, rain, or where humidity is high. It |
(Do not let children climb |
may cause electric shock. |
on to the machine or into |
|
the spin dryer basket. |
|
Injury may occur.) |
|
Switch Area |
Electric Outlet |
Avoid getting water on the switch area. |
Avoid connecting several electric devices |
It may cause electric shock or fire. |
to a single outlet. It may cause fire. |
Volatile Material |
Hot Water |
Do not use volatile materials |
Avoid using hot water higher than 50°C, |
such as benzene, gasoline, |
It may deform the plastic parts or cause |
or pesticides. Do not leave |
malfunction. |
strong alkaline substances |
|
such as bleach inside the |
|
wash tub. It may damage |
|
the plastic surfaces and rub- |
|
ber parts. |
|
Heat |
Power Cord |
Avoid having electric |
If the power supply cord is damaged, it |
heaters, candles, |
must only be replaced by a repair shop |
cigarette lights, etc. |
appointed by the manufacturer, because |
near the machine. |
special purpose tools are required. |
It may ignite or |
|
deform the plastic. |
|
|
3 |
P/No.3828FW3144A
WASHING
COVER
CONTROL
PANEL
OVERFLOW
FILTER
TUB
STRAINER
PULSATOR
Accessories
Safety Cover
4
SAFETY
COVER-2
SPIN DRYER
COVER
SPIN DRYER
BASKET
EARTH WIRE
SAFETY
COVER-1
POWER CORD
Drain Hose
P/No.3828FW3144A
Control panel
1 |
2 |
3 |
|
4 |
|
OFF |
WASH.RINSE |
|
OFF |
|
15 |
3 |
5 |
1 |
|
|
|
DRAIN |
|
|
12 |
6 |
4 |
2 |
|
9 |
|
|
3 |
|
WASH TIMER |
DRAIN SELECTOR |
|
SPIN TIMER |
1. Water Inlet
Connect the hose from the water faucet to feed water to the tub.
2. Wash Timer
Used to select the desired time for washing or rinsing.
3. Drain Selector
Select "WASH · RINSE" for washing and rinsing, and "DRAIN" to drain the tub.
4. Spin Timer
Used to select the desired time for spinning.
W
D H
Power source |
On SPECIFICATION LABEL |
Water level |
High : 34L |
Water pressure |
Less than 1,000kPa (10kgf/cm2) |
Dimensions |
686×412×835mm.(W×D×H) |
Weight (Net) |
17kg |
|
5 |
P/No.3828FW3144A