LG WM2601H Series Installation Manual

WASHINGMACHINE

USER'Sc,UIDE8:

iNSTALLATIONINSTRUCTIONS

Before beginning Installation, read these

instructions carefully. This will simplify installation and

ensure that the washer is installed correctly and safely.

Leave these instructions near the

washer after installation for future reference.

[AVADORA

GUIADE[ IJSUARIOE

INSTRUccIONESDEINSTAI_AcION

Antesde comenzar la instalacion, leaatentamente estasinstruccio-

nes. Estosimplificara lainstalaciOny asegurara que la lavadoraesta

instaladaenforma correcta y segura.Conserveestasinstrucciones

cercade la lavadoraluego de lainstalaciOnparafuturas consultas.

TO contact LG Electronics, 24 hours a day,

7 days a week: 1=800=243=0000

Or visit us on the Web at: us.lge.com NQmero telef6nico de LG Electronics, las 24

horas del dia, 7 dias a la semana: 1=800=243=0000

O visitenos en la Web en: us.Lge.com

To contact LG Electronics, 24 hours a day, 7 days a week:

1=888=542=2623 Or visit us on the Web at: caJge.com

Pour contacter LG Electronics, 24 heures par jour, 7 jours par semaine :

1=888=542=2623 Ou visitez notre site Web & I'adresse : ca.lge.com

MACHINEA [AVER

GUIDEDE['IJTI[ISMEURET

DIREcTIvESD'INSTA[[MION

Avant de commencer a installer votre machine _ laver, lisez at-

tentivement ces instructions. Cela simplifiera votre installation

et assurera que la machine a laver est installee correctement et

en toute securite. Conservez ces instructions a proximite de la

machine _ laver apres son installation, pour reference future.

Model/Modelo/Modele

WM2601H*

Designed specially to use only HE (High-Efficiency) detergent

Disehada especificamente para usar con el

detergente tipo HE (Alta eficiencia) Specialement concu pour

utilisation avec un detergent haute ef- ficacite uniquement

Protocol P172

Sanitization Performance of Residential and Commercial, Family Sized Clothes Washers

Protocolo P172

Ejecucion de Saneamiento en la zona residential V comerdal, lavodoras del uso del hogar

Protocole P172

Performance en matiere d'assainissement des laveuses residentielles et commerciales de grande taille

P/NO. MFL31245182

INT ODUCTION

iMPORTANT SAFETY iNSTRUCTiONS

Basic Safety Precautions .................................. 3-6

PARTS AND FEATURES

specialFeatures.....................................................7

Key Partsand Components ...................................8

iNSTALLATION iNSTRUCTiONS

Choose the Proper Location .................................. 9

Clearances ............................................................. 9

Flooring ................................................................ 10

Installations With Optional Pedestal Base

or Stacking Kit ...................................................... 10

Unpacking and Removing Shipping Bolts ........... 11

Connecting the Water Lines ................................. 12

Connecting the Drain Line.................................... 13

Leveling the Washer ............................................. 14

HOW TO USE

Sorting Wash Loads ............................................. 15

Selecting Detergent .............................................. 16

About the Dispenser ............................................. 16

Loading the Dispenser ......................................... 17

Control Panel Features ......................................... 18

Cycle Guide .......................................................... 19

The LED Display ................................................... 20

Operating the Washer .......................................... 21

Cycle Setting Buttons .......................................... 22

Special Function Buttons ..................................... 23

Custom Program .................................................. 24

Special Functions & Cycles .................................. 24

CARE AND CLEANING

Regular Cleaning ............................................ 25-26

Cleaning the Washer ............................................ 27

Maintenance ................................................... 28-29

TROUBLESHOOTING

Normal Sounds You May Hear .............................30

BeforeCallingforService...............................30-32

THANKYOU

Congratulations on your purchase

and welcome to the LG family.

Your new LG washing machine

combines the most advanced

washing technology with simple

operation and high efficiency.

By following the operating and care

instructions in this manual, your

washer will provide you with many

years of reliable service.

WARRANTY ..............................................34-35

Product Registration Information

Model:

Serial Number: Date of Purchase:

The model and serial number can be located on the rating plate on the front of the washer.

SPECIFICATIONS/OPTIONAL ACCESSORIES

Key Dimensions and Specifications ..................... 33

Optional Accessories ........................................... 33

I 0 TANTSAFETYINST UcTIONS

RSAD ALL iNSTRUCTiONS BEFORS USE

_WARNING Foryo.rsafety,theinformationinthisman.alre.stbe

followed to minimize the risk of fire or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

Your Safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER or WARNING. These words mean:

_E)A_G_R: You can be killed or seriously injured if you don't immediately follow instructions.

_WARN|NG-" You can be killed or seriously injured if you don't follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of

injury, and tell you what can happen if the instructions are not followed.

I PORTANTSAFETYINSTRUCTIONS

RSAD ALL iNSTRUCTiONS BEFORS USS

,WARNING For your safe ,the information in this manual must be

followed to minimize the risk of fire or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

BASIC SAFETY PRECAUTIONS

_II_WAR_II_ | _I_II_G== To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

• Before use, the washer must be properly installed as described in this manual.

• Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.

Do not add gasoline, dry cleaning solvents, or other

flammable or explosive substances to the wash water. These substances give off vapors that could ignite or

explode. Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.

If the hot water system has not been used for such a period, before using the washer, turn on all hot water

faucets and let the water flow from each for several

minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is

used near children. Before the washer is removed from service or

discarded, remove the door to prevent children from climbing inside.

Do not install or store the washer where it will be exposed to the weather or freezing temperatures.

• Do not tamper with controls.

Do not repair or replace any part of the washer or attempt any servicing other than as described in this manual. We strongly recommend that any service be performed by a qualified individual.

,_See installation Instructions for grounding

requirements.

ALWAYS follow the fabric care instructions

supplied by the garment manufacturer. Do not place items exposed to cooking oil in your

washer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a

load to catch fire. Use fabric softeners or products to eliminate static only

as recommended by the manufacturer.

This washer is not designed for maritime use or for

mobile installations such as in RVs, aircraft, etc.

Turn off the water taps and unplug the washer ifthe

machine is to be left for an extended period of time, such as during vacations.

Do not use to dry articles containing foam rubber or similarly textured rubber-like materials.

Packaging material can be dangerous for children.

There is a risk of suffocatio!! Keep all packaging from

children.

,_Always check the inside of the washer for foreign

objects before loading laundry. Keep the door closed when not in use.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must

be plugged into an appropriate outlet that is properly installed and grounded inaccordance with all local codes and ordinances.

,WARNING: Improper connection of the equipment-grounding conductor can result in risk

of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the

outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury,fire, electrical shock, or death.

I 0 TANTSAFETYINST UcTIONS

RSAD ALL iNSTRUCTiONS BEFORS USE

WARNING Foryo.rsafety,theinformationinthismanualmustbe

followed to minimize the risk of fire or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

SAFETY iNSTRUCTiONS FOR iNSTALLATiON

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

• Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures. Installation

instructions are packed in the washer for installer's reference. Ifthe washer is moved to a new location,

have it checked and reinstalled by a qualified service person. Failure to follow this warning can cause

serious injury, fire, electrical shock, or death.

• Do not, under any circumstances cut or remove the third (ground) prong from the power cord.

Failure to follow this warning can cause serious injury, fire, electrical shock, or death.

• For personal safety, this appliance must be properly grounded. Failure to follow this warning can cause serious injury, fire, electrical shock,

or death.

• The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates

with a standard 3-prong (grounding) wall outlet to

minimize the possibility of electric shock hazard from

this appliance.

• This washer must be plugged into a 120VAC, 60Hz grounded outlet. Failure to follow this warning can cause serious injury, fire, electrical shock, or death.

• Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. Failure to follow this warning can cause serious injury, fire, electrical shock,

or death.

• Where a standard 2=prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Failure to follow this warning can cause serious injury, fire, electrical

shock, or death.

• Do not install on carpet. Install washer on a solid floor. Failure to follow this warning can cause serious

leak damage.

Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3=prong outlet. Failure to follow these warnings can cause serious injury, fire, electrical shock, or death.

• The washer should always be plugged into its own individual electrical outlet which has a

voltage rating that matches the rating plate. This

provides the best performance and also prevents

overloading house wiring circuits which could cause a fire hazard from overheated wires.

• Never unplug your washer by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet. Failure to follow this warning can cause serious injury, fire, electrical shock, or death.

• Repair or replace immediately all power cords that have become frayed or otherwise damaged.

Do not use a cord that shows cracks or abrasion

damage along its length or at either end. Failure to follow this warning can cause serious injury, fire,

electrical shock, or death. When installing or moving the washer, be careful

not to pinch, crush, or damage the power cord.

Failure to follow this warning can cause serious injury, fire, electrical shock, or death.

The washer must be installed and electrically grounded by a qualified service person in accordance with local codes to prevent shock

hazard and assure stability during operation.

Washer is heavy. Two or more people may be needed to install and move the appliance. Failure to do so can result in back or other injury.

Store and install the washer where it will not be exposed to temperatures below freezing or

exposed to outdoor weather conditions. Failure to follow this warning can cause serious leak damage.

Do not installthe washer inhumid spaces to

reduce the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electrical

shock, or death.

I PORTANTSAFETYINSTRUCTIONS

READ ALL iNSTRUCTiONS BEFORE USE

WARNING For your safety,the information in this manual must be

followed to minimize the risk of fire or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

SAFETY iNSTRUCTiONS FOR USE, CAREAND CLEANING,AND DISPOSAL

_II_WAF_II_ | _I_G== To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

• Unplug the washer before cleaning to avoid the risk of electric shock.

• Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.

• Do not put oily or greasy rags or clothing on top of the washer. These substances give off

vapors that could ignite the materials.

• Do not wash items that are soiled with vegetable or cooking oil. These items may

contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch

fire by itself.

• Disconnect this appliance from the power supply before attempting any user

maintenance. Turning the controls to the OFF position does not disconnect this appliance

from the power supply. Failure to follow this warning can cause serious injury,fire, electrical

shock, or death.

• Do not combine laundry products for use

in one load unless specified on the label.

• Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow package

directions when using laundry products.

incorrect usage can produce poisonous gas,

resulting in serious injury or death.

• Do not reach into the washer while parts are moving. Before loading, unloading, or adding

items, push in the cycle selector knob and

allow the drum to coast to a complete stop before reaching inside. Failure to follow this warning can cause serious injury,fire, electrical shock, or death.

• Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near

children. As children grow, teach them the proper, safe use of all appliances. Failure to

comply with these warnings could result inserious

personal injuries.

• Destroy the carton, plastic bag, and other

packing materials after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or

plastic sheets can become airtight chambers.

Failure to comply with these warnings could result in serious personal injuries.

• Keep laundry products out of children's reach. To prevent personal injury, observe all warnings on product labels. Failure to comply with these

warnings could result in serious personal injuries.

• Remove the door to the washing compartment to avoid the danger of children or small animals

getting trapped inside before your washer is removed from service or discarded. Failure to do

so can result in serious personal injuryor death.

SPECIAL FEATURES

O DETERGENT DISPENSER DRAWER

This four-compartment drawer provides separate dispensers for prewash and main wash detergent,

liquid bleach, and liquid fabric softener.

CONTROL PANEL WITH LED DISPLAY Simple electronic controls are user-friendly. The

LED display indicates cycle options and cycle time during operation.

O EASY=ACCESS LOCKING DOOR

Extra-large door locks during operation and features a delay to prevent the door from being

opened until the washer interior has cooled and the water level has lowered.

PA TSANDFEATU ES

_) ROLLER JETS

The RollerJet system enhances wash performance while reducing fabric wear.

Integrated jets spray clothes to further improve washing efficiency.

DIRECT=DRIVE MOTOR

Direct-drive motor eliminates the belt and pulleys found on most washers to provide improved

performance and reliability while increasing energy efficiency.

PARTSAND FEATU ES

KEY PARTSAND COMPONENTS

Inadditiontothespecialfeaturesandcomponentsoutlinedin theSpecialFeaturessection,thereareseveralotherimportant

componentsthatarereferencedinthismanual.

ULTRA=CAPACITY STAINLESS STEEL DRUM

Theultra-largestainlesssteeldrumoffersextremedurability andistiltedto improveefficiencyandalloweasieraccessfor

largeitems.

O LEVELING FEET

Fourlevelingfeet(twointhefrontandtwo intheback)adjust to improvewasherstabilityonunevenfloors.

O DRAIN ACCESSPANEL

Provides access to the drain line and drain pump filter.

Drain Hose

Hot and Cold Water Inlets

Rear of Washer

included Accessories

Hot and Cold Water Hoses

shipping bolts and

adjusting leveling feet)

Caps (4) _

(for covering

shipping bolt n_

Tie Strap Elbow Bracket

(for securing (for securing drain hose) drain hose)

INSTk[/MION INST UcTIONS

cHOOSE THE PROPER LOcATiON

WARN|NG

• Washer is heavy! Two or more people are required when moving and unpacking

the washer. Failure to do so can result in back

or other injury.

=Store and install the washer where it will not

be exposed to temperatures below freezing or exposed to outdoor weather conditions.

Failure to follow this warning can cause serious injury, fire, electrical shock, or death.

• Properly ground washer to conform with all governing codes and ordinances. Failure to

follow this warning can cause serious injury, fire, electrical shock, or death.

• To reduce the risk of electric shock, do not install the washer in humid spaces. Failure to

follow this warning can cause serious injury,fire, electrical shock, or death.

The base opening must not be obstructed by carpeting when the washer is installed on a

carpeted floor.

= DO not remove ground prong. Do not use

an adapter or extension cord. Plug into a grounded 3=prong outlet. Failure to follow this

warning can cause serious injury, fire, electrical shock, or death.

Power Outlet

=The power outlet must be within 60 in. (1.5 m) of

either side of the washer.

The appliance and outlet must be positioned so that the plug is easily accessible.

Do not overload the outlet with more than one appliance.

The outlet must be grounded inaccordance with

current wiring codes and regulations.

Time-delay fuse or circuit breaker is

recommended.

NOTE: it is the personal responsibility and obligation of the product owner to have a

proper outlet installed by a qualified electrician.

CLEARANCES

221/2"

(57 cm)

I_,,_, 29%" _ 1_,4

(75.6 cm)

51"

_(129.7 cm) _

To ensure sufficient clearance for water lines and airflow, allow minimum clearances of at least

1 in. (2.5 cm) at the sides and 4 in. (10 cm) behind the unit. Be sure to allow for wall, door,

or floor moldings that may increase the required clearances.

[10 cm)

1"--_11-_- 27" -_11-=_1"

(2.5 cm) (68.6 cm) (2.5 cm)

Allow at least 24 in. (61.2 cm) in front of the washer to open the door.

INSTALlATIONINST UcTIONS

FLOORING

• To minimize noise and vibration, the washer MUST be installed on a solidly constructed floor.

See the NOTE at right.

• Allowable slope under the entire washer is

1o maximum.

• Carpeting and soft tile surfaces are not recommended.

• Never install the washer on a platform or weakly supported structure. Use only an approved

accessory pedestal as described below.

NOTE: Please note that the floor must be strong and rigid enough to support the weight of the

washer when fully loaded, without flexing or bouncing. If your floor has too much flex in it,

you may need to reinforce it to make it more rigid. A floor that is adequate for a top-loading

washer may not be rigid enough for a front- loading washer, due to the difference in the spin

speed and direction. If the floor is not solid, your washer may vibrate and you may hear and feel

the vibration throughout your house.

iNSTALLATiONS WiTH OPTIONAL PEDESTAL BASE OR STACKING KiT

IMPORTANT: if you are installing your washer using instructions for your pedestal or stacking kit before an optional pedestal base or stacking kit, please proceeding with the installation.

refer to Optional Accessories in this manual or to the

Required Dimensions for Installation

With Pedestal

Required Dimensions for Installation

With Stacking Kit

(75.6 cm) (10 cm)

4.,

1"_1I_-_ 27" -_.-I_ 1"

(2.5 cm) (68.6 cm) (2.5 cm)

INSTA[[ATIONINST UcTIONS

UNPACKING AND REMOVING SHiPPiNG BOLTS

when removingthe Washerfromthe carton base, be sureto removethe foam tub support in the middleof the

carton base. If you mustlaythe washerdownto removethe base

packagingmaterials,alwayslayit carefullyon its side. Do NOTlaythe washeronits front or back.

IMPORTANT:Topreventinternaldamage duringtransport, thewasher is equippedwith 4 shippingbolts and plastic

retainers.Thesebolts and retainersMUSTbe removed beforeoperatingthe washer.

• Failureto removeshippingbolts and retainersmaycause

severevibrationandnoise,whichcanleadto permanent damageto thewasher.Thecord issecuredto the backof

the washerwith ashippingbolt to help preventoperation with shipping bolts in place.

Foam Tub Carton Base

Support

_s:_ Shipping

m Bolts

Starting with the bottom 2 shipping bolts, use the included wrench to remove the

4 shipping bolts by turning them counterclockwise.

Hole Ca

Remove the retainers by turning them slightly

while pulling. Rotate and press the hole caps

into the shipping bolt holes. NOTE: Save the bolts and retainers for

future use. To prevent damage to internal components, the shipping bolts and

retainers must be installed when

transporting the washer.

INSTAllATION INST UcTIONS

CONNECTING THE WATER LINES

• IMPORTANT: Use new hoses when installing

the washer. DONOT reuse old hoses.

• IMPORTANT: Use ONLY the inlet hoses provided by LG with this laundry product.

Aftermarket hoses are not guaranteed to fit or function correctly. Other hoses may not tighten

correctly and could cause leaks. Subsequent damage to product or property will not be

covered under the terms of LG's warranty. Water supply pressure must be between

14.5 PSi and 116 PSi (100-800 kPa). If the

water supply pressure is more than 116 PSI, a pressure reducing valve must be installed.

Periodically check the hose for cracks, leaks,

and wear, and replace the hose if necessary.

Make sure that the water lines are not stretched, pinched, crushed, or kinked.

The washer should never be installed or stored

in a location subject to freezing temperatures. Damage to the water lines and internal

mechanisms of the washer can result. Ifthe

washer was exposed to freezing temperatures

prior to installation, allow it to stand at room

temperature for several hours before use.

Water Hose

(to water inlet

on washer

Rubber Seal

Insert a rubber seal into the threaded

fittings on each hose.

Rubber Seal

Water Hose_ (totap)

NOTE: Do not cross-thread the hose fittings. Attach the hot water line to the red hot water

inlet on the back of the washer. Attach the cold water line to the blue cold water inlet on the back of the washer. Tighten the fittings securely.

Water Tap

Attach the hot water line to the hot water tap. Attach the cold water line to the cold

water tap. Tighten the fittings securely. Open the water

taps fully to check for leaks.

INSTAI_/ATIONINST UcTIONS

CONNEcTiNG THE DRAIN LiNE

• The drain hose should always be properly secured. Failure to properly secure the drain

hose can result in flooding and property

damage.

Do not install the end of the drain hose higher

than 96 in. (244.8 cm) above the bottom of the washer.

The drain must be installed in accordance with any applicable local codes and regulations.

Make sure that the water lines are not stretched, pinched, crushed, or kinked.

Option 1: Standpipe

Clip the end of the hose into the elbow bracket. Insert the end of the drain hose into a standpipe.

Use tie strap to secure the drain hose in place. NOTE: Total height of the hose end should not

exceed 96 in. (244.8 cm) from the bottom of the washer.

Option 2: Laundry Tub

Elbow Bracket

Strap

Drain Hose

Clip the end of the hose into the elbow bracket. Hang the end of the drain hose over the side of

the laundry tub. Use tie strap to secure the drain hose in place.

NOTE: Total height of the hose end should not exceed 96 in. (244.8 cm) from the bottom of the washer.

Laund_

Option 3: Floor Drain

Drain Hose

Floor Drain

Insert the end of the drain hose into the floor drain. Secure the hose in place to prevent it

from moving.

INSTALLATIONINST UcTIONS

LEVELING THE WASHER

The drum of your new washer spins at very high speeds, up to 1,200 RPM. To minimize vibration, noise, and unwanted movement, the floor must

be a perfectly level, solid surface. NOTE: Adjust the leveling feet only as far as

necessary to level the washer. Extending the leveling feet more than necessary can cause

the washer to vibrate.

• All four leveling feet must rest solidly on the

floor. Rock the washer gently from corner to corner to make sure that the washer does

not rock.

If you are installing the washer on the optional pedestal, you must use the leveling feet on

the pedestal to level the washer. The washer's leveling feet should be fully retracted and locked

into position with the Iocknuts.

Level

Leveling Feet

Position the washer in the final location,

taking special care to not pinch, strain, or crush the water and drain lines. Place a level

across the top of the washer.

Leveling Feet

Raise Lower

Loosen the Iocknuts on all 4 leveling feet until you can turn the feet with the included

wrench. Turn clockwise to raise the washer or counterclockwise to lower it.

Tighten all 4

Iocknuts securely

Once the washer is level from side to side

and front to back, tighten all Iocknuts

securely. Make sure that all 4 leveling feet are in firm

contact with the floor.

NOTE: To make sure that the washer is properly level, run the washer with a test

load: place approximately 6 pounds of laundry in the machine. Then press POWER,

press RINSE+SPIN, and then press the

START/PAUSE button. See the following

sections for additional information on cycle selection and operation.

Verify that the washer does not rock or vibrate excessively during the spin cycle.

If the washer vibrates or shakes, adjust

the leveling feet until the washer is stable and retest.

SORTING WASH LOADS

0 TO USE

FaDri¢ Care LaDels

Most articles of clothing feature fabric care labels that include instructions for proper care.

Fabric Care Labels

wash cycle .orma, Permanent"_press/ GentlY/

Water • Q • • • •

temperature Hot Warm Cold/cool

Bleach _ _ symbols Any bleach Only non-chlodne bleach Donot bleach

wrinkle resistant delicate

H h Donot wash Donot wring

(50°C/120°F) (40°C/105°F) (30°C/85°F)

(whenneeded) (whenneeded)

Loading the washer

* Check all pockets to make sure that they

are empty. Items such as clips, matches, pens, coins, and keys can damage both your

washer and your clothes.

* Close zippers, hooks, and drawstrings to

prevent these items from snagging or tangling on other clothes.

. Pretreat heavily stained areas for best results. . Combine large and small items in a load. Load

large items first.

. Large items should not be more than half of the

total washload.

. The washer can be fully loaded, but the drum

should not be tightly packed with items. The door of the washer should close easily.

. To prevent an out-of-balance load, do not wash

single items. Add one or two similar items to the load. Large, bulky items, such as a blanket,

comforter, or bedspread should be washed individually.

. Do not wash or spin waterproof clothes. . When unloading the washer, check under the

door seal for small items.

Grouping Similar Items

For best results, sort clothes into loads that can be washed with the same wash cycle.

Different fabrics have different care requirements. Always wash dark colors separately from light

colors and whites to prevent discoloration. If possible, do not wash heavily soiled items with

lightly soiled ones. The chart below shows recommended groupings.

NOTE: The front loading washer rotates the wet laundry to wash it with less water. If you

do not see the water during washing, it is not a problem because the laundry is sufficiently

wet.

OWTO USE

SELECTING DETERGENT

IMPORTANT: Your washing machine is designed for use with only High-Efficiency

(HE) detergents. HE detergents are formulated specifically for front-load washers and contain

suds-reducing agents. Always look for the HE symbol when purchasing detergent.

HE detergents produce fewer suds, dissolve more efficiently to improve washing and rinsing

performance, and help to keep the interior of your washer clean.

Using a regular detergent may cause oversudsing and unsatisfactory performance.

ABOUT THE DISPENSER

The automatic dispenser consists of four compartments which hold:

• Liquid chlodne bleach.

• Liquid fabric softener.

• Liquid or powdered detergent for prewash.

• Liquid or powdered detergent and color-safe

bleach for main wash.

All laundry products can be added at once in their respective dispenser compartments. They

will be dispensed at the appropriate time for the most effective cleaning.

After adding the laundry products to the dispenser, close the dispenser drawer.

To add detergent, bleach, and fabric softener to the automatic dispenser:

_Open the drawer. O Load the into the

appropriate compartments.

O Slowly close the drawerdispenser

avoid early dispensing of the laundry

products, NOTE: It is normal for a small amount of water to remain in the dispenser compartments at the end

of the cycle,

dispenser

laundry products

IMPORTANT: Do not place or store laundry products, such as detergent, bleach, or liquid

fabric softener, on top of your washer or dryer. Wipe up any spills immediately. These products

can damage the finish and controls.

Liquid Chlorine Bleach

Compartment

Designed specially to use only HE (High-Efficiency) detergent

Liquid Fabric Softener

Compartment

Main Wash Detergent Compartment

Insert

Liquid Detergent

_nt

Compartment

LOADING THE DISPENSER

0 TO USE

Prewash Detergent Compartment

Add liquid or powdered detergent to this compartment when using the Prewash option.

Always use HE (High-Efficiency) detergent with your washing machine.

• The amount of detergent added for the Prewash option is 1/2 the amount recommended for the

main wash cycle. For example, if the main wash

cycle requires one measure of detergent, add

1/2 measure for the Prewash option.

NOTE: If liquid detergent is to be used for the main wash when using the pre-wash option, the

liquid detergent cup accessory must be used in main wash dispenser to prevent the main

wash liquid detergent from being dispensed immediately.

Main wash Detergent Compartment

This compartment holds laundry detergent for the main wash cycle, which is added to the load at the beginning of the cycle. Always

use HE (High-Efficbncy) detergent with your washing machine.

Never exceed the manufacturer's recommendations when adding detergent.

Using too much detergent can result in detergent buildup in clothing and the washer.

Either powdered or liquid detergent may be used.

When using liquid detergent, make sure the

liquid detergent cup and insert are in place. Do not exceed the maximum fill line.

When using powdered detergent, remove the insert and liquid detergent cup from the

compartment. Powdered detergent will not dispense with the liquid detergent cup and

insert in place.

NOTE: Liquid or powdered color-safe bleach may be added to the main wash compartment

with detergent of the same type.

Liquid Bleach Compartment

This compartment holds liquid chlorine bleach, which will be dispensed automatically at the proper time during the wash cycle.

Do not add powdered or liquid color-safe bleach

to this compartment. Always follow the manufacturer's

recommendations when adding bleach. Do not exceed the maximum fill line. Using too much bleach can damage fabrics.

Never pour undiluted liquid chlorine bleach directly onto the load or into the drum. Fabric

damage can occur.

Fabric Softener Compartment

This compartment holds liquid fabric softener, which will be automatically dispensed during the

final rinse cycle.

Always follow the manufacturer's

recommendations when adding fabric softener. Do not exceed the maximum fill line. Using

too much fabric softener may result in stained

clothes. Dilute concentrated fabric softeners with warm

water. Do not exceed the maximum fill line. Never pour fabric softener directly onto the load

or into the drum.

Designed speciallv to use onlv HE (High-Efficiencv) detergent

OWTO USE

CONTROL PANEL FEATURES

PERM. PRESS

DELICATES

. HAND WASH/WOOL

SPEED WASH

POWER ON/OFF BUTTON

Press to turn the washer ON. Press again to turn the washer OFR

NOTE: Pressing the ON/OFF button during a cycle will cancel that cycle and any load settings

will be lost. CYCLE SELECTOR KNOB

Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard

presets will be shown in the display. These settings can be adjusted using the cycle setting

buttons anytime before starting the cycle. START/PAUSE BUTTON

Press this button to START the selected cycle. If the washer is running, use this button to PAUSE the cycle without losing the current settings.

NOTE: If you do not press the START/PAUSE button within 4 minutes of selecting a cycle, the

washer automatically turns off.

CYCLE SETTING BUTTONS

Use these buttons to select the desired cycle

options for the selected cycle. The current options are shown in the display. Press the

button for that option to view and select

other settings.

DELAY WASH BUTTON

Press this button to delay the start of the wash

cycle. Each press of the button increases the delay time by one hour, up to 19 hours.

LED DISPLAY

The display shows the settings, estimated time

remaining, option, and status messages for your

washing machine. The display will remain on through the cycle.

SPECIAL FUNCTION BUTTONS The special function buttons allow you to select

additional functions and will light when selected.

Certain buttons also allow you to activate secondary functions by pressing and holding

the button for 3 seconds.

For detailed information about the individual

functions, please see the following pages.

0 TO USE

CYCLE GUIDE

The cycle guide below shows the options and recommended fabric types for each cycle.

Sanitary

Bright WhiteTM

Cold CareTM

Bulky/Large

Cotton/

Normal

Perm. Press

Delicates

Hand Wash/

Wool

Speed Wash

Heavily soiled underwear, work

cothes, d apers, etc

White Fabrics

Small loads of cotton, ilinen,towels, iShirts, sheets, jeans,

mixed loads

iLargeitems such as

blankets and comforters

iCotton, linen, towels, ishirts, sheets, jeans,

mixed loads

iDress shirts/pants,

wrinkle free clothing,

poly/cotton blend iclothing, table cloths

Dress shirts/blouses

nylons, sheer or lacy

igarments

iltems labeled i"hand washable"

Lightly soiled clothing land small loads

Extra Hot/Cold

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Cold/Cold

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Warm/Cold

Warm/Warm

Cold/Cold

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

High

Extra High

No Spin

Low

Medium

High

Extra High

No Spin

Low

Medium

High

Extra High

No Spin

Low

Medium

Low

Medium No Spin

High

Extra High

No Spin

Low

Medium Medium

High

No Spin

Low

Medium No Spin

Low Low

No Spin

Extra High

No Spin

Low

Medium

High

Normal

Heavy

Light

Normal

Heavy

Light

Normal

Light

Normal

Heavy

Light

Normal

Heavy

Light

Normal

Heavy

Light

Normal

Heavy

Light

Normal

Light

Normal

Heavy

@ @ @ @ @

@ @

NOTE: To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available with every cycle.

OWTO USE

THE LED DISPLAY

The LED display shows the settings, estimated time remaining, options, and status messages for your washer. When the washer is turned on, the display will illuminate.

DOOR LOCI( INDICATOR

O CYCLE COMPLETION iNDiCATOR

This portion of the display shows which stage of the wash cycle is currently underway (LOAD

SENSING, WASH, RINSE or SPIN).

ESTIMATED TIME REMAINING

When the START/PAUSE button is pressed, the washer automatically detects the wash load

(weight) and optimizes the washing time, based on the selected cycle and options. The display

will then indicate the estimated time remaining for the selected wash cycle.

NOTE: The cycle time displayed may appear much longer than that of a top-loading washer.

The displayed time is for the complete cycle, rather than just the agitation portion of the cycle,

as istypically shown on a top-loading washer.

indicates that the door is locked. The washer

door will lock while the washer is operating. The door can be unlocked by pressing the START/

PAUSE button to stop the washer. NOTE: If the temperature in the washer istoo

high, the door cannot be unlocked until the washer has cooled. If the water level is too

high, select the DRAIN & SPIN cycle to drain excess water. Do not try to force open the door.

DELAY WASH INDICATOR

This indicator shows that the washer has

been set for DELAY WASH. The washer will

start automatically after the set delay time has passed.

OPERATING THE WASHER

Once you have loaded the washer and added laundry products (detergent, bleach, and/or

fabric softener):

O Press the ON/OFF button to turn on the

washer. The lights around the cycle

selector knob will illuminate.

O Turn the cycle selector knob to the desired

cycle. The display will show the

preset Rinse/Wash Temperature,

Spin Speed, Soil Level, and

Option settings for that cycle.

Oil you would like to change the settings

for that cycle, press the option button(s) to display additional settings for that option.

Press the button again to cycle through

the settings until the desired setting is

shown.

NOTE: To protect your garments, not every

wash/rinse temperature, spin speed, soil

level, or option is available with every cycle.

0 TO USE

O Press the START/PAUSE button

the cycle. The door will latch, the display will change, and

the washer will calculate the estimated time remaining. Once

the washer has calculated the estimated total cycle time, the washer will start. To

pause the cycle at any time, press PAUSE. NOTE: The cycle time displayed may

appear much longer than that of a top-

loading washer. The displayed time is for the

complete cycle, rather than just the agitation

portion of the cycle, as is typically shown on

a top-loading washer.

NOTE: if the temperature in the washer is

too high, the door cannot be unlocked until the washer has cooled. If the water level is

too high, select the DRAIN & SPIN cycle to drain excess water. Do not try to force the door open.

Washing time can be reduced significantly for small or lightly soiled loads by selecting

the Speed Wash cycle and setting the Soil

Level button to Light.

begin

Select any additional cycle options, such as STAIN CYCLE or DELAY WASH by pressing the button for that option, or by pressing the

OPTION button for additional options.

NOTE: To protect your garments, not every

wash/rinse temperature, spin speed, soil

level, or option is available with every cycle.

When the load is finished, the beeper (if set) will sound and the door will unlock.

Remove damp clothes from the washer immediately. Check under the door seal

for small items.

OWTO USE

CYCLESETTING BUTTONS

Each cycle has preset settings that are selected automatically. You may also customize the

settings using the cycle setting buttons. Press the button for that option to view and select

other settings. The washer automatically adjusts the water level

for the type and size of wash load for best results and maximum efficiency. It may seem there is no

water inside the drum in some cycles, but this is normal.

NOTE: To protect your garments, not every wash/ rinse temperature, spin speed, soil level, or option

is available with every cycle. See the Cycle Guide for details.

WASH/RINSE

Selects the wash and rinse temperature combination for the

selected cycle. Press the WASH/

RINSE button repeatedly to scroll

through available settings.

• Your washer features a heating element to boost the hot water temperature for Extra Hot settings.

This provides improved wash performance at

normal water heater settings.

Select the water temperature suitable for the type of load you are washing. Follow the fabric

care label for best results.

• Warm rinses leave the loads drier than cold

rinses. Warm rinses can increase wrinkling. In cold climates, a warm rinse makes the load

more comfortable to handle. Cold rinses use less energy.

SPIN SPEED

The washer drum spins at up to

1,200 RPM. This reduces drying

time and saves energy.

Press the SPIN SPEED button to

select the maximum spin speed. Some fabrics, such as delicates, require a slower spin speed.

The Drain & Spin cycle: The Spin Speed button also activates the Drain

& Spin cycle to drain the tub and spin clothes; for example, if you want to remove clothes before

the cycle has ended.

To activate the DRAIN & SPiN cycle: O Press the ON/OFF button to turn on

the washer.

O Press the SPIN SPEED button. _li Select the desired spin speed.

NOTE: If NO SPIN is selected, the washer will drain only.

_ Press the START/PAUSE button.

BEEPER

Adjusts the volume of the end-of- cycle beeper, or turns it off.

SOIL LEVEL

Adjusts the selected cycle to allow more time for heavily soiled clothes

or less time for lightly soiled clothes.

SPECIAL FUNCTION BUTTONS

0 TO USE

Your washing machine features several additional cycle options to customize cycles to meet your

individual needs. Certain option buttons also

feature a special function (see the following page for details) that can be activated by pressing and

holding that option button for 3 seconds.

TOAdd Cycle Options to a Cycle:

t_ Turn on the washer and turn the cycle

selector knob to select the desired cycle.

O Use the buttons to the

settings for that cycle. Press the cycle option button(s) for the

option you would like to add. The cycle option buttons will light when selected.

O Press the START/PAUSE button to start the

cycle. The washer will start automatically.

NOTE: To protect your garments, not every wash/ rinse temperature, spin speed, soil level, or option

is available with every cycle. See the Cycle Guide

for details.

STAIN CYCLE

the selected cycle, as well as an additional rinse

cycle.

DELAY WASH

button increases the delay time by one hour, up

to 19 hours.

cycle setting

Select this option for heavily stained clothes, such as play

clothes or work clothes. Stain Cycle will add extra wash time to

Once you have selected the cycle and other settings, press this

button to delay the start of the

wash cycle. Each press of the

adjust

WATER PLUS

Select this option to add extra water to the wash and rinse cycles for superior results, especially with

large or bulky items.

EXTRA RINSE

This option will add an extra rinse cycle to the selected cycle. Use

this option to help ensure the

removal of detergent or bleach

residue from fabrics.

RINSE+SPIN

Select this option to rinse and spin a load separately from a

regular cycle. This can be helpful in preventing fresh stains from

setting in fabrics. To activate the Rinse+Spin cycle:

O Press the ON/OFF button to turn on

the washer.

O Press the RINSE+SPIN button.

Press the START/PAUSE button.

WASH/RINSE OPTIMIZER rM

This function can adjust washing & rinsing time efficiently with

checking the level of detergent and degree of hardness.

Excessive detergent amount: rinsing cycle increase.

!nsufficient detergent amount: washing time increase.

A small amount of remaining detergent detected, additional rinsing will be added.

CUSTOM PGM

Use the CUSTOM PGM button

to select the course that you has

been saved by "PGM SAVE".

PRE-WASH

Adds 16 minutes prewash and a spin cycle.

OWTO USE

CUSTOM PROGRAM

CUSTOM PROGRAM allows you to store a customized wash cycle

for future use. It allows you to save favorite temperature, spin

speed, soil level, and other options for a cycle,

and then recall them at the touch of a button.

TOstore a Custom Program:

O Select a cycle.

Adjust the Wash/Rinse Temperature, Spin Speed, and Soil Level to the desired settings.

_Set any other desired options. O Press and hold the CUSTOM PROGRAM

button for 3 seconds. You will hear two beeps to confirm the settings have been

stored.

SPECIAL FUNTiONS & CYCLES

The special function buttons also activate

secondary functions, including CHILD LOCK and

TUB CLEAN. Press and hold the button marked with the secondary function for 3 seconds to

activate.

CHILD LOCK

Use this option to prevent

unwanted use of the washer or to keep cycle settings from being

changed while the washer is

operating. Press and hold the PRE WASH button for 3 seconds to activate or deactivate CHILD

LOCK. CHILD LOCK will be shown in the display,

and all controls are disabled. The washer can be

locked during a cycle.

TUB CLEAN

A buildup of detergent residue can occur in the wash tub over

time and can lead to a mildewy

or musty smell. The TUB CLEAN cycle is specially designed to remove this buildup. The display will show a message to add liquid bleach to the dispenser. Prewash option will be selected. After the cycle has ended, open the door and allow the drum interior to dry completely. Refer to Care and Cleaning of the

Intedoffor further information. NOTE: Do NOT use this cycle with clothes,

and do NOT add detergent or fabric softener. NOTE: If you use the TUB CLEAN cycle on a

monthly basis, the wash drum will be kept clean.

iMPORTANT: If you press and hold the CUSTOM PROGRAM button for 3 seconds, you will

overwrite any previously stored CUSTOM PROGRAM.

TOrecall a Custom Program:

O Press and release the CUSTOM PROGRAM

button. The stored settings will be displayed. Press and release the START/PAUSE button

to start the cycle. The washer will start automatically.

COLD CARE Tm

Use this cycle to wash without hot water and heating. For high wash efficiency, recommended less than 8 Ibs. and low speed spin for ultimate

fabric care.

BRIGHT WHITE TM

Use this cycle to wash white fabrics with bleach. NOTE : Before use this cycle with bleach, check

bleach symbols on your cloths.

HAND WASH/WOOL

• Only woolen items that are designated as "Machine-Washable" should be washed in this

washing machine

• Wash only small loads for optimum fabric care (less than 8 Ibs.)

Only neutral (wool safe) detergents should be used (Only a small quantity of detergent

is needed due to the small load size and low volume of water in the cycle.)

The HANDWASH/WOOL cycle uses a gentle tumble action and low speed spin for ultimate

fabric care

The wool wash cycle of this machine has been

(_)® approved by Woolmark for the washing of machine

WOOLMAI_K on the garment label and those issued by the

_I Certified by NSFCertificado pot NSF

NSF International (formerly the National Sanitation Foundation), certifies that SANITARY cycle reduces 99.9% of bacteria on

laundry, and none of bacteria will carry over onto the next laundry load.

washable Woolmark products provided that the

products are washed according to the instructions

manufacturer of this washing machine, MOB07

CAREANDCLEANING

REGULAR CLEANING

WARNING:

• Unplug the washer before cleaning to avoid the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electrical shock, or death.

• Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.

cleaning the Exterior

Propercareofyourwashercanextenditslife.Theoutside ofthemachinecan becleanedwith warmwateranda mild,

nonabrasivehouseholddetergent. Immediatelywipeoff anyspillswith asoft, dampcloth. IMPORTANT:Donotusemethylatedspirits,solvents,or

similarproducts. Neverusesteelwoolorabrasivecleansers;theycandamage

thesurface.

Care and Cleaning of the Interior

Usea towelorsoftclothto wipearoundthewasherdoor opening,doorseal,anddoorglass.Theseareasshouldbe keptcleanto ensureawatertightseal.Besureto wipeunder theinsiderubbersealto removeany moistureor soil.

Alwaysremoveitemsfromthe washerassoon asthe cycleis completed.Leavingdampitemsinthewasher cancausewrinkling,color transfer,andodor.

RuntheTUBCLEANcycleregularlyto removedetergent buildupandotherresidue.

Thiswasherhasaspecialcycle,TUBCLEAN,to remove insidebuildupof detergentresiduewhichcanoccurinthe washtubor drumandleadto mildewor mustysmell.

Readthese instructionscarefully beforebeginningthe TUBCLEANcycle.

O Openthedoorandremoveanyclothingin thewash

drum.

_t Openthedispenserdrawer.

Add liquidchlorinebleachortub cleaner.

Somepowderor tablettub cleanerswhichare

manufacturedfor this purposecanbe used. (NOTE: Donotadd anylaundrydetergentor fabric

softenertothedrawerwhenusingTUBCLEAN.)

- if usingliquid chlorine bleach Addliquidchlorinebleachtothebleachcompartment

ofthedrawer. (NOTE: Do notexceedthe maximumfilllineanddo

notpourundilutedliquidbleachdirectlyintothewash drum.)

- if usingpowdercleaner

Removetheliquiddetergentcupandaddpowder

cleanerto themainwashcompartmentof thedrawer.

- If usingtablet cleaner Addtabletcleanerto the washdrumdirectly. (NOTE: Do notaddtabletcleanerto thedrawer.)

Closethe drawerandwasherdoor.

SelectTUBCLEANandpressSTART.

NOTE: Itis recommendedthatTUBCLEANshouldbe repeatedmonthly.

If mildewor mustysmellalreadyexists,runTUBCLEANfor3 consecutiveweeks.

AfterTUBCLEANis completeorwhenthewasherisnot used, leavethewasherdooropenfor betterventilationanddrying

insideof thewasher.

CA E ANDcLEANING

REGULAR CLEANING ccont._

Removing the Stain in Door Seal

NOTE: Wear rubber gloves and eye protection while

performing the following procedure:

O Dilute 3/4 cup (177 m0 liquid chlorine bleach with

1 gallon (3.8 L) of warm/hot water,

_l Usethis solution to wipe down all surfaces of

the gasket to remove the deposits that arecausing any odor. (Besure to fold back the lip of the gasket

to get underthe edge where residue can build up.) Wipe the gasket with a dry'cloth.

Leavethe door open to allow the gasket to dry'

completely.

Donotuseundilutedbleachasthiswilldamagethegasket.Follow themanufacturer'sinstructionsforproperuseofbleach.

Ifthegasketcannotbecleanedproperly,it shouldbereplaced.

Storing the Washer

If the washer will not be used for an extended period of time and is in an area that could be

exposed to freezing temperatures:

Turn off water supply

Disconnect hoses from water supply and

drain water from hoses.

Plug the power cord into a properly grounded

electrical outlet. Add 1 gallon of nontoxic recreational vehicle

(RV)antifreeze to the empty wash drum. Close door.

Select the spin cycle and let washer spin

for 1 minute to drain out all the water.

NOTE: Not all of the RV antifreeze will be

expelled.

Unplug the power cord, dry the drum interior with a soft cloth, and close the door.

Remove the inserts from the dispenser. Drain any water in compartments and dry the

compartments. Store the washer in an upright position.

To remove the antifreeze from the washer after storage, run washer through a complete

cycle using detergent. Do not add laundry!

tap.

Removing Lime Buildup

If you live in an area with hard water, lime scale

can form on internal components of the washer.

Use of a water softener is recommended in areas with hard water. If a descaler is used, make sure that it is suitable for use in a washer, and run the TUB CLEAN cycle before washing clothing.

Lime scale and other spots may be removed from the stainless steel drum using a stainless

steel cleaner. Do NOT use steel wool or abrasive cleansers; they can damage the surface.

NOtice Of tub clean activation

To clean up the tub, please select the tub clean course. Please empty the tub and insert bleach

into the detergent dispenser and push the tub clean button.

Door open recommended

It is recommended that you should leave the door open after getting finished with laundry to keep

the tub clean.

CLEANING THE WASHER

CA E ANDCLEANING

Cleaning the Dispenser

The dispenser should be cleaned periodically to remove buildup from detergent and other

laundry products.

Pull out the dispenser drawer until it stops. Press the button in the center of the drawer

and pull to remove the drawer.

NOTE: If you clean the detergent dispenser once

a week, it will always dispense properly.

Remove the inserts from the drawer, and

clean them with warm water and a soft cloth or brush to remove any residue or buildup.

Wipe out the inside of the drawer opening with a damp cloth. Reassemble the drawer and reinstall in the drawer opening.

NOTE: Do not use anything other than water

to clean the drawer, inserts, and drawer opening. If any sort of household cleaner

drains into the interior of the washer, run a

RINSE+SPIN cycle before washing clothes.

CA E ANDcLEANING

MAINTENANCE

Cleaning the water Inlet Filters

If the washer detects that water is not entering the dispenser, an error message will show on the

display. If you live in an area with hard water, this may be caused by clogged inlet filters.

IMPORTANT: Use extreme care when removing and cleaning the filters. If the filters cannot be

cleaned or are damaged, do NOT operate the washer without the inlet filters. Contact LG

Customer Service or a qualified LG servicer.

IMPORTANT: Use ONLY the inlet hoses provided

by LG with this laundry product. Aftermarket

hoses are not guaranteed to fit or function

correctly. Other hoses may not tighten correctly

and could cause leaks. Subsequent damage to

product or property will not be covered under the

terms of LG's warranty.

@ @

Inlet Filter

off both water taps completely. Unscrew

the hot and cold water lines from the back of the washer.

Carefully remove the filters from the water

inlets, and soak them in white vinegar

or a lime scale remover, following the manufacturer's instructions. Rinse thoroughly

before reinstalling.

Press the filters back into place and reattach the water lines. Do NOT operate the washer without the inlet filters.

MAiNTENANcE (cont.)

Cleaning the Drain Pump Filter

Lint and other objects may accumulate and clog

the drain pump filter. If the washer fails to drain

properly, unplug the washer and allow the water

to cool, if necessary, before proceeding.

CA E ANDCLEANING

Open the drain pump filter access panel.

/ Pump i Filter

Plug

Remove the plug from the drain hose, and

allow the water to drain completely. Twist the pump filter counterclockwise to

remove. Remove any lint and foreign objects

from the pump filter.

Reverse the above steps to reinstall the drain pump filter and drain hose. Be sure to close

the cover panel when finished.

Drain Hose

Unclip the drain hose and pull it out. Place

the end of the drain hose in a pan, bucket,

or floor drain to catch water.

,,J

f OU [ES OOTING

NORMAL SOUNDS YOU MAY HEAR

The following sounds may be heard while the washer is operating. They are normal.

Clicking: Door lock relay when the door locks and unlocks.

Spraying or hissing: Water spraying or circulating during

the cycle.

BEFORE CALLINGFOR SERVICE

Your washing machine is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If your washer does not function properly or does not function at all, check the

following before you call for service.

Humming or gurgling: Drain pump pumping water from the washer at

the end of a cycle. Splashing:

Clothes tumbling in the drum during the wash and rinse cycles.

Rattling and clanking noise

Thumping

sound

Vibrating noise

Water leaking

around washer

Excessive sudsing

• Foreign objects, such as keys, coins, or safety pins, may be in drum or pump.

• Heavy wash loads may produce a thumping sound.

• Washer load may be out of balance.

• Shipping bolts and/or packaging materials not removed.

• Wash load may be unevenly distributed in the drum.

• Not all leveling feet are resting

firmly on the floor.

• Floor not rigid enough.

• Fill hose connection is loose at tap or washer.

• House drain pipes are clogged.

oToo much detergent or

incorrect detergent.

• Stop washer and check drum and drain filter for foreign objects. If noise continues after washer is

restarted, call for service.

• This is normal. If sound continues, washer is

probably out of balance. Stop and redistribute

wash load.

• Stop and redistribute wash load.

• See Installation Instructions for removing shipping

bolts and packaging.

• Stop washer and rearrange wash load.

• Adjust the leveling feet. Make sure all four feet are in firm contact with the floor while the washer is in the

spin cycle with a load.

• Make sure that the floor is solid and does not flex.

Refer to "Flooring" in the Installation section.

• Check hoses. Check and tighten hose connections.

• Unclog drain pipe. Contact a plumber if necessary.

• Reduce detergent amount or use low-sudsing

detergent.

Only use detergent with the HE

(High-Efficiency) logo.

+ 73 hidden pages

LG WM2601H Series Installation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual