OWNER’S MANUAL
WASHING MACHINE
Please read this manual carefully before operating your washing machine and retain it for future reference.
WM2350H*C
P/NO : MFL62526846
<![endif]>FRANÇAIS ESPAÑOL ENGLISH
www.lg.com
MFL62526846_en_101116.indd 1 |
2010.11.16 10:58:54 AM |
I N T RO D U C T I
O N
IMPORTANT SAFETY INSTRUCTIONS
Basic Safety Precautions ...................................... |
4 |
Grounding Instructions .......................................... |
4 |
Safety Instructions for Installation........................... |
5 |
Safety Instructions for Use, Care and Cleaning, and |
|
and Disposal .......................................................... |
6 |
PARTS AND FEATURES |
|
Special Features..................................................... |
7 |
Key Parts and Components.................................... |
8 |
INSTALLATION INSTRUCTIONS |
|
Choose the Proper Location................................... |
9 |
Clearances.............................................................. |
9 |
Flooring................................................................. |
10 |
Installations with Optional Pedestal Base |
|
or Stacking Kit....................................................... |
10 |
Unpacking and Removing Shipping Bolts............ |
11 |
Connecting the Water Lines.................................. |
12 |
Connecting the Drain Line.................................... |
13 |
Leveling the Washer.............................................. |
14 |
Installation of Non-skid pads (Optional)................ |
14 |
HOW TO USE |
|
Control Panel Features ........................................ |
15 |
Operating the Washer........................................... |
16 |
Cycle Guide........................................................... |
17 |
Sorting Wash Loads ............................................. |
18 |
Selecting detergent............................................... |
19 |
About the Dispenser............................................. |
19 |
Loading the Dispenser.......................................... |
20 |
The Time And Status Display................................ |
21 |
Cycle Setting Buttons............................................ |
22 |
Custom Program................................................... |
23 |
Load Size Sensing System................................... |
23 |
Cycle Option Buttons............................................ |
24 |
Special Functions ................................................. |
25 |
Special Care Cycles.............................................. |
26 |
COLDWASH™ Cycles ......................................... |
26 |
CARE AND CLEANING |
|
Regular Cleaning................................................... |
27 |
Cleaning the Washer............................................. |
28 |
Maintenance......................................................... |
29 |
TROUBLESHOOTING |
|
Normal Sounds You May Hear.............................. |
31 |
Before Calling for Service..................................... |
31 |
Using SmartDiagnosis™....................................... |
34 |
SPECIFICATIONS/OPTIONAL ACCESSORIES
Key Dimensions and Specifications...................... |
34 |
Optional Accessories............................................ |
34 |
WARRANTY................................................... |
35 |
THANK YOU!
Congratulations on your purchase
and welcome to the LG family.
Your new LG washing machine
combines the most advanced
washing technology with simple operation and high efficiency.
By following the operating and care
instructions in this manual, your
washer will provide you with many years of reliable service.
Product Registration Information
Model:
Serial Number:
Date of Purchase:
The model and serial number can be located on the rating plate on the front of the washer.
Staple your receipt here for your convenience in the event you need it for warranty coverage.
2
MFL62526846_en_101116.indd 2 |
2010.11.16 10:58:54 AM |
I M P O RTA N T S A F
E
T Y I
N S T RU C T I
O N S
READ ALL INSTRUCTIONS BEFORE USE
wWARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
Your Safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER or WARNING. These words mean:
wDANGER: You can be killed or seriously injured if you don’t immediately follow instructions.
wWARNING: You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
3
<![endif]>ENGLISH
MFL62526846_en_101116.indd 3 |
2010.11.16 10:58:55 AM |
I M P O RTA N T S A F
E
T Y I
N S T RU C T I
O N S
READ ALL INSTRUCTIONS BEFORE USE
wWARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
basic safety precautions
wWARNING: To reduce the risk of fire, electric shock, or injury to person when using this appliance, follow basic precautions, including the following.
•Before use, the washer must be properly installed as described in this manual.
•Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.
•Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.
•Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
•Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children.
•Before the washer is removed from service or discarded, remove the door to prevent children from climbing inside.
•Do not install or store the washer where it will be exposed to the weather or freezing temperatures.
•Do not tamper with controls.
•Do not repair or replace any part of the washer or attempt any servicing other than as described in this manual. We strongly recommend that any service be performed by a qualified individual.
•See Installation Instructions for grounding requirements.
•ALWAYS follow the fabric care instructions supplied by the garment manufacturer.
•Do not place items exposed to cooking oil in your washer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.
•Use fabric softeners or products to eliminate static only as recommended by the manufacturer.
•This washer is not designed for maritime use or for mobile installations such as in RVs, aircraft, etc.
•Turn off the water taps and unplug the washer if the machine is to be left for an extended period of time, such as during vacations.
•Do not use to dry articles containing foam rubber or similarly textured rubber-like materials.
•Packaging material can be dangerous for children.
There is a risk of suffocation! Keep all packaging from children.
•Always check the inside of the washer for foreign objects before loading laundry. Keep the door closed when not in use.
•Do not reach into the appliance if the tub or agitator is moving.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
wWARNING: Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.
4
MFL62526846_en_101116.indd 4 |
2010.11.16 10:58:55 AM |
I M P O RTA N T S A F
E
T Y I
N S T RU C T I
O N S
READ ALL INSTRUCTIONS BEFORE USE
wWARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
wWARNING: To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.
•Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures. Installation instructions are packed with the washer for installer’s reference. If the washer is moved to a new location, have it checked and reinstalled by a qualified service person. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Do not, under any circumstances cut or remove the third (ground) prong from the power cord.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•For personal safety, this appliance must be properly grounded. Failure to follow this warning can cause serious injury, fire, electric shock,
or death.
•The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock from this appliance.
•This washer must be plugged into a 120 VAC, 60 Hz grounded outlet. Failure to follow this warning can cause serious injury, fire,
electric shock, or death.
•Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. Failure to follow this warning can cause serious injury, fire, electric shock,
or death.
•Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Do not install on carpet. Install washer on a solid floor. Failure to follow this warning can cause serious leak damage.
•Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.
•The washer should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.
•Never unplug your washer by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•When installing or moving the washer, be careful not to pinch, crush, or damage the power cord.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•The washer must be installed and electrically grounded by a qualified service person in accordance with local codes to prevent shock hazard and assure stability during operation.
•The washer is heavy. Two or more people may be needed to install and move the appliance. Failure to do so can result in back or other injury.
•Store and install the washer where it will not be exposed to temperatures below freezing or
exposed to outdoor weather conditions. Failure to follow this warning can cause serious leak damage.
•Do not install the washer in humid spaces to reduce the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety warnings in this manual could result in property damage, injury to persons or death.
5
<![endif]>ENGLISH
MFL62526846_en_101116.indd 5 |
2010.11.16 10:58:55 AM |
I M P O RTA N T S A F
E
T Y I
N S T RU C T I
O N S
READ ALL INSTRUCTIONS BEFORE USE
wWARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persona, or death.
SAFETY INSTRUCTIONS FOR USE, CARE AND CLEANING, AND DISPOSAL
wWARNING: To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.
•Unplug the washer before cleaning to avoid the risk of electric shock.
•Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.
•Do not put oily or greasy rags or clothing on top of the washer. These substances give off vapors that could ignite the materials.
•Do not wash items that are soiled with vegetable or cooking oil. These items may contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.
•Disconnect this appliance from the power supply before attempting any user
maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Do not combine laundry products for use in one load unless specified on the label.
•Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow package directions when using laundry products.
Incorrect usage can produce poisonous gas, resulting in serious injury or death.
•Do not reach into the washer while parts are moving. Before loading, unloading, or adding items, press the START/PAUSE button and allow the drum to coast to a complete stop before reaching inside. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. As children grow, teach them the proper, safe use of all appliances. Failure to comply with these warnings could result in serious injury to persons.
•Destroy the carton, plastic bag, and other packing materials after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers.
Failure to comply with these warnings could result in serious injury to persons.
•Keep laundry products out of children’s reach. To prevent injury to persons, observe all warnings on product labels. Failure to comply with these warnings could result in serious injury to persons.
•Remove the door to the washing compartment to avoid the danger of children or small animals getting trapped inside before your washer is removed from service or discarded. Failure to do so can result in serious injury to persons or death.
SAVE THESE INSTRUCTIONS
6
MFL62526846_en_101116.indd 6 |
2010.11.16 10:58:55 AM |
PA RT S A N D F E
AT U R E
S
SPECIAL FEATURES
ADetergent Dispenser Drawer
This four-compartment drawer provides separate dispensers for pre-wash and main wash detergent, liquid bleach, and liquid fabric softener.
B Easy-Access Locking Door |
B |
|
The extra-large door locks during operation and features a delay to prevent the door from being opened until the washer interior has cooled and the water level has lowered.
E
A
C
C INVERTER DIRECT-DRIVE MOTOR
The inverter direct-drive motor eliminates the belt |
|
and pulleys found on most washers to provide |
|
improved performance and reliability while |
D |
increasing energy efficiency. |
|
D MAGNETIC DOOR PLUNGER
Safely and conveniently secure the door slightly ajar with a magnetic door plunger.
This will promote air circulation and allow the interior of the machine to dry.
To use this feature, after the load has been removed, do not close the door completely. When the magnetic door plunger comes into contact with the metal washer cabinet, it will secure the door slightly open allowing the interior of the washer to dry.
Protocol P172
Sanitization Performance of Residential and
Commercial, Family Sized Clothes Washers
ESMARTDIAGNOSIS™
Should you experience any technical difficulty with your washing machine, it has the capability of transmitting data by phone to the Customer Information Center. The call center agent records the data transmitted from your machine and uses it to analyze the issue, providing a fast and effective diagnosis (refer to page 34).
<![endif]>ENGLISH
7
MFL62526846_en_101116.indd 7 |
2010.11.16 10:58:56 AM |
PA RT S A N D F E
AT U R E
S
KEY PARTS AND COMPONENTS
In addition to the special features and components outlined in the Special Features section, there are several other important components that are referenced in this manual.
AUltra-Capacity Stainless Steel Drum
The ultra-large stainless steel drum offers extreme durability and is tilted to improve efficiency and allow easier access for large items.
BDISPLAY WITH LOAD SIZE INDICATOR
The load size is set automatically based on the weight and size of each load for optimal washing and fabric care.
CLeveling Feet
Four leveling feet (two in the front and two in the back) adjust to improve washer stability on uneven floors.
DDrain Access Panel
Provides access to the drain line and drain pump filter.
B
A
D
C
Hot and Cold
Water Inlets
Drain
Hose
Rear of Washer
Included Accessories
Hot and Cold |
Non-skid pads |
Caps (4) |
Water Hoses |
|
(for covering |
|
|
shipping bolt holes) |
Wrench (for removing |
Tie Strap |
|
shipping bolts and |
(for securing |
Elbow Bracket |
adjusting and |
drain hose) |
(for securing |
|
drain hose) |
|
locking leveling feet) |
|
|
|
|
8
MFL62526846_en_101116.indd 8 |
2010.11.16 10:59:0 AM |
I N S TA L
L
AT I
O N I
N S T RU C T I
O N S
CHOOSE THE PROPER LOCATION
CLEARANCES
wWARNING
•Washer is heavy! Two or more people are required when moving and unpacking
the washer. Failure to do so can result in back or other injury.
•Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Properly ground washer to conform with all governing codes and ordinances. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•To reduce the risk of electric shock, do not install the washer in humid spaces. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•The base opening must not be obstructed by carpeting when the washer is installed on a carpeted floor.
•Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
Power Outlet
•The power outlet must be within 60 inches
(1.5 m) of either side of the washer.
•The appliance and outlet must be positioned so that the plug is easily accessible.
•Do not overload the outlet with more than one appliance.
•The outlet must be grounded in accordance with current wiring codes and regulations.
•Time-delay fuse or circuit breaker is recommended.
NOTE: It is the personal responsibility and obligation of the product owner to have a proper outlet installed by a qualified electrician.
211/4” |
|
(54 cm) |
|
293/4" |
4" |
(75.6 cm) |
(10 cm) |
51" |
|
(129.5 cm) |
|
To ensure sufficient clearance for water lines and airflow, allow minimum clearances of at least 1 inch (2.5 cm) at the sides and 4 inches (10 cm) behind the unit. Be sure to allow for wall, door, or floor moldings that may increase the required clearances.
1" |
27" |
1" |
(2.5 cm) |
(68.6 cm) |
(2.5 cm) |
Allow at least 24 inches (61.2 cm) in front of the washer to open the door.
<![endif]>ENGLISH
9
MFL62526846_en_101116.indd 9 |
2010.11.16 10:59:1 AM |
I N S TA L
L
AT I
O N I
N S T RU C T I
O N S
FLOORING
•To minimize noise and vibration, the washer
MUST be installed on a solidly constructed floor. See the NOTE below.
•Allowable slope under the entire washer is 1° maximum.
•Carpeting and soft tile surfaces are not recommended.
•Never install the washer on a platform or weakly supported structure. Use only an approved accessory pedestal as described below.
NOTE: Please note that the floor must be strong and rigid enough to support the weight of the washer when fully loaded, without flexing or bouncing. If your floor has too much flex in it, you may need to reinforce it to make it more rigid. A floor that is adequate for a top-loading washer may not be rigid enough for a frontloading washer, due to the difference in the spin speed and direction. If the floor is not solid, your washer may vibrate and you may hear and feel the vibration throughout your house.
NOTE: Before installing the washer, make sure the floor is
clean, dry and free of dust, dirt, water and oils so the washer feet
can not slide easily. Leveling feet
that can move or slide on the floor can contribute to excess vibration and noise due to poor contact with the floor.
NOTE: If a drip pan must be used, take extra care
to follow the instructions provided with the drip pan and make sure the leveling
feet are adjusted for firm and even contact with the pan. Use of drip pans and failure to properly level the machine may result in increased vibration and noise during operation.
INSTALLATIONS WITH OPTIONAL PEDESTAL BASE OR STACKING KIT
IMPORTANT: If you are installing your washer using an optional pedestal base or stacking kit, please refer to Optional Accessories in this manual or to the instructions for your pedestal or stacking kit before proceeding with the installation.
Required Dimensions for Installation With Pedestal
293/4" |
4" |
(75.6 cm) |
(10 cm) |
Required Dimensions for Installation With Stacking Kit
|
|
771⁄2" |
|
|
(190.5 cm) |
1" |
27" |
1" |
(2.5 cm) |
(68.6 cm) |
(2.5 cm) |
10
MFL62526846_en_101116.indd 10 |
2010.11.16 10:59:3 AM |
I N S TA L
L
AT I
O N I
N S T RU C T I
O N S
UNPACKING AND REMOVING SHIPPING BOLTS
When removing the washer from the carton base, be sure to remove the foam tub support in the middle of the carton base.
If you must lay the washer down to remove the base packaging materials, always lay it carefully on its side. Do NOT lay the washer on its front or back.
IMPORTANT: To prevent internal damage during transport, the washer is equipped with 4 shipping bolts and plastic retainers. These bolts and retainers MUST be removed before operating the washer.
•Failure to remove shipping bolts and retainers may cause severe vibration and noise, which can lead to permanent damage to the washer. The cord is secured to the back of the washer with a shipping bolt to help prevent operation with shipping bolts in place.
Shipping
Bolts
1Starting with the bottom 2 shipping bolts, use the included wrench to remove the
4 shipping bolts by turning them counterclockwise.
<![endif]>ENGLISH
|
Retainer |
Foam Tub |
Carton Base |
Support |
Hole Cap |
|
|
|
2 Remove the retainers by turning them slightly |
|
while pulling. Rotate and press the hole caps |
|
into the shipping bolt holes. |
|
NOTE: Save the bolts and retainers for |
|
future use. To prevent damage to internal |
|
components, the shipping bolts and |
|
retainers must be installed when |
|
transporting the washer. |
11
MFL62526846_en_101116.indd 11 |
2010.11.16 10:59:5 AM |
I N S TA L
L
AT I
O N I
N S T RU C T I
O N S
Connecting the Water Lines
Rubber |
Rubber Seal |
|
Seal |
|
|
Water hose |
Water hose |
|
(To water inlet |
(To tap) |
|
on the washing |
||
|
||
machine) |
|
1Check the rubber seals on both sides of the hose.
-Insert a rubber seal into the threaded fittings on each hose to prevent leaking.
2Connect the water hoses to the faucets.
-Connect the blue hose to a cold water faucet and the red hose to a hot water faucet.
-If there is only one faucet, connect it to the cold water faucet. In this case, the water supply may be delayed for the first 3 minutes of the supply in order to differentiate hot from cold water.
Cold |
Hot |
|
Water |
||
Water |
||
Inlet |
||
Inlet |
||
|
4Connect the hoses to the water inlets.
-Connect the blue hose to the cold water inlet and the red hose to the hot water inlet.
•Check for leaks by turning on the faucets.
- If water leaks, check steps 1 to 3 again.
NOTE
•For your safety, and for extended product life, use only authorized components.
The manufacturer is not responsible for product malfunction or accidents caused by the use of separately purchased unauthorized parts.
•Use new hoses when you install the washing machine. Do not reuse old hoses.
•Periodically check the hoses for cracks, leaks and wear, and replace the hoses every 5 years.
•Do not stretch the water hoses intentionally, and make sure that they are not crushed by other objects.
•Water line pressure must be between 14.5 PSI and 116 PSI (100 - 800 kPa). If the water line pressure is higher than 116 PSI, a pressure reducing valve must be installed.
3Turn on the water faucet to remove foreign substance such as dirt, sand, or sawdust
12 |
in the water line, and then check the water |
|
temperature. |
||
|
MFL62526846_en_101116.indd 12 |
2010.11.16 10:59:6 AM |
I N S TA L
L
AT I
O N I
N S T RU C T I
O N S
CONNECTING THE DRAIN LINE
•The drain hose should always be properly secured. Failure to properly secure the drain hose can result in flooding and property damage.
•Do not install the end of the drain hose higher than 96 inches (244.8 cm) above the bottom of the washer.
•The drain must be installed in accordance with any applicable local codes and regulations.
•Make sure that the water lines are not stretched, pinched, crushed, or kinked.
NOTE: If the drain hose is extended more than 4 inches beyond the end of the elbow bracket, mold, or microorganisms could spread to
the inside of the washer.
No more than 4 inches
Elbow Bracket
Option 1: Standpipe
Elbow
Bracket
Drain
Hose
Option 2: Laundry Tub
Elbow
Bracket Laundry
Tub
Tie
Drain Strap
Hose
Clip the end of the hose into the elbow bracket. Hang the end of the drain hose over the side of the laundry tub. Use tie strap to secure the drain hose in place.
NOTE: Total height of the hose end should not exceed 96 inches (244.8 cm) from the bottom of the washer.
Option 3: Floor Drain
Drain Hose
Floor Drain
Clip the end of the hose into the elbow bracket. |
Insert the end of the drain hose into the floor |
Insert the end of the drain hose into a standpipe. |
drain. Secure the hose in place to prevent it |
Use tie strap to secure the drain hose in place. |
from moving. |
NOTE: Total height of the hose end should not |
|
exceed 96 inches (244.8 cm) from the bottom of |
|
the washer. |
|
<![endif]>ENGLISH
13
MFL62526846_en_101116.indd 13 |
2010.11.16 10:59:9 AM |
I N S TA L
L
AT I
O N I
N S T RU C T I
O N S
LEVELING THE WASHER
The drum of your new washer spins at very high speeds, up to 1,200 RPM. To minimize vibration, noise, and unwanted movement, the floor must be a perfectly level, solid surface.
NOTE: Adjust the leveling feet only as far as necessary to level the washer. Extending the leveling feet more than necessary can cause the washer to vibrate.
Level
Leveling
Feet Leveling
Feet
1Position the washer in the final location, taking special care to not pinch, strain, or crush the water and drain lines. Place a level across the top of the washer.
Raise |
Lower |
2Loosen the locknuts on all 4 leveling feet until you can turn the feet with the included wrench. Turn clockwise to raise the washer or counterclockwise to lower it.
•All four leveling feet must rest solidly on the floor. Rock the washer gently from corner to corner to make sure that the washer does not rock.
If you are installing the washer on the optional pedestal, you must use the leveling feet on the pedestal to level the washer. The washer’s
leveling feet should be fully retracted and locked into position with the locknuts.
NOTE: To make sure that the washer is properly level, run the washer with a test load: place approximately 6 pounds of laundry
in the machine. Then press POWER, select RINSE+SPIN cycle, and then press the START/ PAUSE button. See the following sections for additional information on cycle selection and operation.
Verify that the washer does not rock or vibrate excessively during the spin cycle.
If the washer vibrates or shakes, adjust
the leveling feet until the washer is stable and retest.
INSTALLATION OF NON-SKID
PADS (OPTIONAL)
Some floor surfaces are too slippery to prevent the washer from moving on the floor during heavily unbalanced loads. While it is normal for an occasional load to be out of balance, excess noise and vibration can result from the washer moving out of position. If these conditions are encountered, follow the instructions below for installation of the non-skid pads. These pads will help prevent the washer from moving during heavy out of balance conditions thereby reducing noise and vibration.
• Non-skid pads |
This side up |
|
Stick adhesive side to floor
Remove backing
Place the pads under both front feet.
Tighten all 4 lock nuts securely using the wrench.
3Once the washer is level from side to side and front to back, tighten all locknuts securely.
14 |
Make sure that all 4 leveling feet are in firm |
contact with the floor. |
MFL62526846_en_101116.indd 14 |
2010.11.16 10:59:12 AM |
CONTROL PANEL FEATURES
H O W TO U S E
4 |
7 |
6 |
8
<![endif]>ENGLISH
1 |
2 |
3 |
1POWER ON/OFF BUTTON
Press to turn the washer ON. Press again to turn the washer OFF.
NOTE: Pressing the ON/OFF button during a cycle will cancel that cycle and any load settings will be lost.
2CYCLE SELECTOR KNOB
Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. These settings can be adjusted using the cycle settings buttons anytime before starting the cycle.
3START/PAUSE BUTTON
Press this button to START the selected cycle.
If the washer is running, use this button to PAUSE the cycle without losing the current settings.
NOTE: If you do not press the START/PAUSE button within 4 minutes of selecting a cycle, the washer automatically turns off.
4CUSTOM PROGRAM BUTTON
Press the CUSTOM PROGRAM button to save and recall a customized wash cycle for future use. You can save the Cycle, Wash/Temp., Spin Speed, and Soil Level settings, as well as other cycle options.
5
5CYCLE SETTINGS BUTTONS
Use these buttons to adjust the desired cycle options for the selected cycle.
6COLDWASH™ BUTTON
Use this function to save energy by using cold water while ensuring proper washing. For high wash efficiency, it is recommended to use less than 8 pounds.
7TIME AND STATUS
The display shows the settings, estimated time remaining, options, and status messages for your washer.
8OPTION BUTTONS
The option buttons allow you to select additional cycle options and will light when selected. Certain buttons also allow you to activate special functions by pressing and holding the button for 3 seconds. For detailed information about the individual options, please see the following pages.
15
MFL62526846_en_101116.indd 15 |
2010.11.16 10:59:14 AM |
H O W TO U S E
OPERATING THE WASHER
wWARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance
1 SORT LAUNDRY AND LOAD THE WASHER
Different fabrics have different care requirements. See the Cycle Guide on page 17 for details. For best washing, sort clothes into loads that can be washed with the same wash cycle.
2 PUT IN DETERGENT
Open the dispenser drawer and add detergent to the main wash compartment in the dispenser drawer. Add bleach and fabric softener as desired.
3 TURN ON THE WASHER
Press the ON/OFF button to turn on the washer. The lights around the cycle selector knob will illuminate.
4 SELECT A CYCLE
Turn the cycle selector knob to the desired cycle. The display will show the preset wash/temp., spin speed, soil level, and option settings for that cycle.
5 SELECT CYCLE SETTING
If you would like to change the settings for that cycle, press the option button(s) to display additional settings for that option. Press the button again to cycle through the settings until the desired setting is shown.
NOTE: To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available with every cycle. The water temperature of all rinsing cycles are set as cold.
6SELECT CYCLE OPTIONS
Select any additional cycle options, such as CUSTOM PROGRAM, or COLDWASH™ by pressing the button for that option, or by pressing the OPTION button for additional options.
NOTE: To protect your garments, not every wash/temp., spin speed, soil level, or option is available with every cycle. The water temperature of all rinsing cycles are set as cold.
7BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. To pause the cycle at any time, press START/PAUSE.
NOTE: If the temperature in the washer is too high, the door cannot be unlocked until the washer has cooled. If the water level is too high, select the Drain & Spin cycle (see the page 22 for details) to drain excess water. Do not try to force the door open.
8CHECK CYCLE TIME
The door will latch, the display will change, and the washer will calculate the estimated time remaining. Once the washer has calculated the estimated total cycle time, the washer will start.
NOTE: Washing time can be reduced significantly for small
or lightly soiled loads by selecting the Speed Wash cycle and setting the Soil Level button to Light.
NOTE: The cycle time displayed may appear much longer than that of a top loading washer. The displayed time is for the
complete cycle, rather than just the agitation portion of the cycle, as is typically shown on a top-loading washer.
16
MFL62526846_en_101116.indd 16 |
2010.11.16 10:59:18 AM |
H O W TO U S E
CYCLE GUIDE
The cycle guide below shows the options and recommended fabric types for each cycle.
= Available option
Wash/Temp. |
Water |
Cold |
|
Plus |
WashTM |
||
|
Extra Hot
SANITARY
Warm
BULKY/
LARGE
DELICATES
PERM.
PRESS
COTTON/
NORMAL
Heavily soiled cotton
HEAVY DUTY
HAND WASH/
WOOL
SPEED WASH
DRAIN+
SPIN
Hot
Tap Cold
Cold
Cold
Warm
Tap Cold
Warm
Hot
Tap Cold
Cold
Warm
Hot
Tap Cold
Cold
Warm
Hot
Tap Cold
Cold
Warm
Tap Cold
Cold
Hot
Tap Cold
Cold
Warm
- |
- |
- |
- |
NOTE: To protect your garments, not every wash/temperature, spin speed, soil level, or option is available with every cycle.
The water temperature of all rinsing cycles are set as cold.
<![endif]>ENGLISH
17
H O W TO U S E
SORTING WASH LOADS
Fabric Care Labels
Most articles of clothing feature fabric care labels that include instructions for proper care.
Fabric Care Labels
Grouping Similar Items
For best results, sort clothes into loads that can be washed with the same wash cycle.
Different fabrics have different care requirements.
Always wash dark colors separately from light colors and whites to prevent discoloration. If possible, do not wash heavily soiled items with lightly soiled ones. The chart below shows recommended groupings.
Sort Laundry...
|
by Colors |
|
by Soil |
|
by Fabric |
|
by Lint |
|
|
|
|
||||
|
Whites |
|
Heavy |
|
Delicates |
|
Lint Producer |
|
Lights |
|
Normal |
|
Easy Care |
|
Lint Collector |
|
Darks |
|
Light |
|
Sturdy |
|
|
|
|
|
|
|
Loading the Washer
•Check all pockets to make sure that they are empty. Items such as clips, matches, pens, coins, and keys can damage both your washer and your clothes.
•Close zippers, hooks, and drawstrings to prevent these items from snagging or tangling on other clothes.
•Pre-treat heavily stained areas for best results.
•Combine large and small items in a load. Load large items first.
18
•Large items should not be more than half of the total wash load.
•The washer can be fully loaded, but the drum should not be tightly packed with items. The door of the washer should close easily.
•To prevent an out-of-balance load, do not wash single items. Add one or two similar items to the load. Large, bulky items, such as a blanket, comforter, or bedspread should be washed individually.
•Do not wash or spin waterproof clothes.
•When unloading the washer, check under the door seal for small items.
NOTE: The front loading washer rotates the wet laundry to wash it with less water. If you do not see the water during washing, it is not a problem because the laundry is sufficiently wet.
MFL62526846_en_101116.indd 18 |
2010.11.16 10:59:21 AM |
H O W TO U S E
SELECTING DETERGENT |
ABOUT THE DISPENSER |
IMPORTANT: our washing machine is designed for use with only High-Efficiency (HE) detergents. HE detergents are formulated specifically for front-load washers and contain suds-reducing agents. Always look for the HE symbol when purchasing detergent.
HE detergents produce fewer suds, dissolve more efficiently to improve washing and rinsing performance, and help to keep the interior of your washer clean.
Using a regular detergent may cause oversudsing and unsatisfactory performance.
IMPORTANT: Do not place or store laundry products, such as detergent, bleach, or liquid fabric softener, on top of your washer or dryer. Wipe up any spills immediately. These products can damage the finish and controls.
Designed specially to use only
HE (High-Effi ciency) detergent
The automatic dispenser consists of four compartments which hold:
•Liquid chlorine bleach.
•Liquid fabric softener.
•Liquid or powdered detergent for pre-wash.
•Liquid or powdered detergent and color-safe bleach for main wash.
All laundry products can be added at once in their respective dispenser compartments. They will be dispensed at the appropriate time for the most effective cleaning.
After adding the laundry products to the dispenser, close the dispenser drawer.
To add detergent, bleach, and fabric softener to the automatic dispenser:
1Open the dispenser drawer.
2Load the laundry products into the appropriate compartments.
3Slowly close the dispenser drawer to avoid early dispensing of the laundry products.
NOTE: It is normal for a small amount of water to remain in the dispenser compartments at the end of the cycle.
Liquid Fabric
Softener Insert
Compartment
Liquid Chlorine |
Liquid |
|
Bleach |
||
Detergent |
||
Compartment |
||
Cup |
||
|
Pre-wash
Detergent
Compartment
Main Wash Detergent
Compartment
19
<![endif]>ENGLISH
MFL62526846_en_101116.indd 19 |
2010.11.16 10:59:22 AM |
H O W TO U S E
LOADING THE DISPENSER
Pre-wash Detergent Compartment
Add liquid or powdered detergent to this compartment when using the pre-wash option. Always use HE (High-Efficiency) detergent with your washing machine.
•The amount of detergent added for the pre-wash option is 1⁄2 the amount recommended for the main wash cycle. For example, if the main wash cycle requires one measure of detergent, add
1⁄2 measure for the pre-wash option.
NOTE: If liquid detergent is to be used for the main wash when using the pre-wash option, the liquid detergent cup accessory must be used in main wash dispenser to prevent the main wash liquid detergent from being dispensed immediately.
Main Wash Detergent Compartment
This compartment holds laundry detergent for the main wash cycle, which is added to the load at the beginning of the cycle. Always use HE (High-Efficiency) detergent with your washing machine.
Never exceed the manufacturer’s recommendations when adding detergent. Using too much detergent can result in detergent buildup in clothing and the washer.
Either powdered or liquid detergent may be used.
•When using liquid detergent, make sure the liquid detergent cup and insert are in place. Do not exceed the maximum fill line.
•When using powdered detergent, remove the insert and liquid detergent cup from the compartment. Powdered detergent will not dispense with the liquid detergent cup and insert in place.
NOTE: Liquid or powdered color-safe bleach may be added to the main wash compartment with detergent of the same type.
Designed specially to use only
HE (High-Efficiency) detergent
20
Liquid Chlorine |
|
|
Bleach |
Liquid Fabric |
|
Compartment |
||
Softener |
||
|
||
|
Compartment |
Main Wash |
Pre-wash |
Detergent |
|
Detergent |
Compartment |
Compartment |
|
Liquid Bleach Compartment
This compartment holds liquid chlorine bleach, which will be dispensed automatically at the proper time during the wash cycle.
•Do not add powdered or liquid color-safe bleach to this compartment.
•Always follow the manufacturer’s recommendations when adding bleach. Do not exceed the maximum fill line. Using too much bleach can damage fabrics.
•Never pour undiluted liquid chlorine bleach directly onto the load or into the drum. Fabric damage can occur.
Fabric Softener Compartment
This compartment holds liquid fabric softener, which will be automatically dispensed during the final rinse cycle.
•Always follow the manufacturer’s recommendations when adding fabric softener. Do not exceed the maximum fill line. Using too much fabric softener may result in stained clothes.
•Dilute concentrated fabric softeners with warm water. Do not exceed the maximum fill line.
•Never pour fabric softener directly onto the load or into the drum.
MFL62526846_en_101116.indd 20 |
2010.11.16 10:59:23 AM |
H O W TO U S E
THE TIME AND STATUS DISPLAY
The time and status display shows the cycle progress and estimated time remaining, cycle options, and other status messages for your washer.
3 |
2 |
4 |
1 |
5
1ESTIMATED TIME REMAINING
When the START/PAUSE button is pressed, the washer automatically detects the wash load (weight) and optimizes the washing time, based on the selected cycle and options. The display will then indicate the estimated time remaining for the selected wash cycle.
NOTE: The cycle time displayed may appear much longer than that of a top-loading washer. The displayed time is for the complete cycle, rather than just the agitation portion of the cycle, as is typically shown on a top-loading washer.
2CYCLE COMPLETION INDICATOR
This portion of the display shows which stage of the wash cycle is currently underway (LOAD SENSING, WASH, RINSE or SPIN).
4DOOR LOCK INDICATOR
Indicates that the door is locked. The washer door will lock while the washer is operating. The door can be unlocked by pressing the START/PAUSE button to stop the washer.
NOTE: If the temperature in the washer is too high, the door cannot be unlocked until the washer has cooled. If the water level is too high, select the DRAIN & SPIN cycle to drain excess water. Do not try to force open the door.
5DELAY WASH INDICATOR
This indicator shows that the washer has been set for DELAY WASH. The washer will start automatically after the set delay time has passed.
3AUTOMATIC LOAD SIZE SENSING
At the beginning of the cycle, the washer tumbles the load and detects the weight of the clothes. The display will indicate the approximate load size in the LOAD SIZE
display. This allows you to adjust the amount of detergent and other additives for best results and improved efficiency.
<![endif]>ENGLISH
21
MFL62526846_en_101116.indd 21 |
2010.11.16 10:59:24 AM |
H O W TO U S E
CYCLE SETTING BUTTONS
Each cycle has preset settings that are selected automatically. You may also customize the settings using the cycle setting buttons.
Press the button for that setting until the indicator light for the desired value is lit.
The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency. It may seem there is no water inside the drum in some cycles, but this is normal.
NOTE: To protect your garments, not every wash/ temp., spin speed, soil level, or option is available with every cycle. See the Cycle Guide for details.
WASH/TEMP.
Selects the wash and rinse temperature
combination for the selected cycle.
Press the WASH/TEMP. button until the indicator light for the desired setting is
lit.
•Your washer features a heating element to boost the hot water temperature for Extra Hot settings. This provides improved wash performance at normal water heater settings.
•Select the water temperature suitable for the type of load you are washing. Follow the fabric care label for best results.
•Cold rinses use less energy, and the rinse temperature depends on the cold water at the faucet.
•The water temperature of all rinsing cycles are set as cold.
SPIN SPEED
The washer drum spins at up to 1,200 RPM. This extracts more water from clothes, reducing drying time and saving energy.
Press the SPIN SPEED button until the indicator light for the desired setting is lit. Some fabrics, such as delicates, require a slower spin speed.
The Drain & Spin cycle:
The Spin Speed button also activates the Drain & Spin cycle to drain the tub and spin clothes; for example, if you want to remove clothes before the cycle has ended.
SOIL LEVEL
Adjusts the selected cycle to allow more time for heavily soiled clothes or less time for lightly soiled clothes. Press the SOIL
LEVEL button until the indicator light for the desired setting is lit.
22
MFL62526846_en_101116.indd 22 |
2010.11.16 10:59:24 AM |
CUSTOM PROGRAM
CUSTOM PROGRAM allows you to store a customized wash cycle
for future use. It allows you to save
favorite temperature, spin speed, soil level, and other options for a cycle,
and then recall them at the touch of a button.
To store a Custom Program:
1Select a cycle.
2Adjust the Wash/Temp., Spin Speed, and Soil Level to the desired settings.
3Set any other desired options.
4Press and hold the CUSTOM PROGRAM button for 3 seconds. You will hear two beeps to confirm the settings have been stored.
LOAD SIZE SENSING SYSTEM
At the beginning of the cycle, the washer tumbles the load and detects the weight of the clothes. The display will indicate the approximate
load size in the LOAD SIZE display. This allows you to adjust the amount of detergent and other additives for best results and improved efficiency.
The LOAD SIZE display:
Example 1 : If the washer has detected a small load size, the display may only show one lighted bar. Only a small amount of detergent should be used, because the amount of clothing and the quantity of water that will be used is small.
Detergent
manufacturer’s
recommended
amount for a full load
Example 2 : If the washer has detected a large load size, the display may show all four bars lighted. More detergent should be used, because the amount of clothing and the quantity of water that will be used is greater.
Detergent
manufacturer’s
recommended
amount for a full
load
NOTE: Because the washer uses a very small amount of water, care should be taken when deciding how much detergent to use. Normal loads only need about half the detergent manufacturer’s recommended amount. This saves detergent by using it in a more concentrated manner. However, for heavily soiled loads, additional detergent should be added. Never exceed manufacturer
H O W TO U S E
IMPORTANT: If you press and hold the |
<![if ! IE]> <![endif]>ENGLISH |
|
|
CUSTOM PROGRAM button for 3 seconds, you |
|
will overwrite any previously stored CUSTOM |
|
PROGRAM. |
|
To recall a Custom Program:
1Press and release the CUSTOM PROGRAM button. The stored settings will be displayed.
2Press and release the START/PAUSE button to start the cycle. The washer will start automatically.
To use Automatic Load Size Sensing:
1Load the washer, select the desired cycle and options, and then start the cycle by pressing the START/PAUSE button.
2The washer will tumble for a short time to detect the size of the load. After the washer detects the load size, the washer will show the detected size in the LOAD SIZE display for 10 seconds before it continues with the cycle.
3During the 10 second delay in step three, press the START/PAUSE button to pause the cycle.
4Fill the detergent and additive compartments of the detergent drawer with detergent/dditive amounts based on the load size the machine has detected. Following these guidelines can save detergent.
5Press the START/PAUSE button again to resume the cycle.
To check the load size during the wash portion of the cycle, press and hold the RINSE+SPIN button for 3 seconds. The LOAD SIZE display will be activated for 10 seconds.
NOTE: The load detection routine only works with dry clothes. Since the detection system is detecting the WEIGHT of the load, it will be affected by unusually heavy articles in the load. For example,
a garment that is already wet that is loaded with other items will cause the LOAD SIZE reading to be inaccurate.
If you do not desire to take advantage of the load size detection feature, simply load the desired amount of detergent and additives in the dispenser
and start the washer in the usual manner. |
23 |
|
MFL62526846_en_101116.indd 23 |
2010.11.16 10:59:25 AM |
H O W TO U S E
CYCLE OPTION BUTTONS
Your washing machine features several additional cycle options to customize cycles to meet your individual needs. Certain option buttons also feature a special function (see the following page for details) that can be activated by pressing and holding that option button for 3 seconds.
To Add Cycle Options to a Cycle:
1Turn on the washer and turn the cycle selector knob to select the desired cycle.
2Use the cycle settings buttons to adjust the settings for that cycle.
3Press the cycle option button(s) for the option you would like to add. The cycle option buttons, except DELAY, will light when selected.
4Press the START/PAUSE button to start the cycle. The washer will start automatically.
NOTE: To protect your garments, not every wash/ temp., spin speed, soil level or option is available
COLDWASHTM
Use this function to save energy by using cold water while ensuring
proper washing. For high wash efficiency, it is recommended to use less than 8 pounds.
PREWASH
Select this option to add a
16-minute prewash and spin cycle to the chosen cycle. This is
especially useful for heavily soiled items.
RINSE+SPIN
Select this option to rinse and spin a load separately from a regular cycle.
This can be helpful in preventing fresh stains from setting in fabrics.
To activate the Rinse+Spin cycle:
1Press the ON/OFF button to turn on the washer.
2Press the RINSE+SPIN button.
3Press the START/PAUSE button.
EXTRA RINSE
This option will add an extra rinse cycle to the selected
cycle. Use this option to help ensure the removal of detergent or bleach residue from fabrics.
WATER PLUS
Select this option to add extra water to the wash and rinse
cycles for superior results, especially with large or bulky items.
24
MFL62526846_en_101116.indd 24 |
2010.11.16 10:59:26 AM |
SPECIAL FUNCTIONS
The option buttons also activate special functions, including LOAD SIZE, SIGNAL ON/OFF, CHILD LOCK, TUB CLEAN. Press and hold the option button marked with the special function for 3 seconds to activate.
LOAD SIZE
At the beginning of the cycle, the washer tumbles the load and detects the weight of the clothes. The display will indicate the approximate
load size in the LOAD SIZE display. This allows you to adjust the amount of detergent and other additives for best results and improved efficiency. See page 23 for details.
CHILD LOCK
Use this option to prevent unwanted use of the washer
or to keep cycle settings from being changed while the washer is operating. Press and hold the PREWASH button for 3 seconds to activate or deactivate the child lock function.
The child lock indicator will be shown in the display, and all buttons are disabled except the ON/OFF button.
NOTE: CHILD LOCK lasts after the end of cycle. If you want to deactivate this function, Press and hold the PREWASH button for 3 seconds.
H O W TO U S E
|
TUB CLEAN |
A buildup of detergent residue |
<![if ! IE]> <![endif]>ENGLISH |
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
can occur in the wash tub |
|
|
|
|
over time and can lead to a |
|
|
|
|
||
|
mildewy or musty |
smell. The TUB CLEAN cycle is |
|
|
|
specially designed to remove this buildup. Press |
|
||
|
and hold the EXTRA RINSE button for 3 seconds |
|
||
|
to activate this cycle. After the cycle has ended, |
|
||
|
open the door and allow the drum interior to dry |
|
||
|
completely. |
|
NOTE: Do NOT use this cycle with clothes, and do NOT add detergent or fabric softener.
NOTE: If you use the TUB CLEAN cycle on a monthly basis, the wash drum will be kept clean.
SIGNAL ON/OFF
You may turn the end-of-cycle SIGNAL on or off with the
WATER PLUS button Press and hold the WATER PLUS button for 3 seconds to turn the SIGNAL OFF.
Press and hold the WATER PLUS button again for 3 seconds to turn the SIGNAL back on.
25
MFL62526846_en_101116.indd 25 |
2010.11.16 10:59:27 AM |
H O W TO U S E
SPECIAL CARE CYCLES |
COLDWASH™ CYCLES |
HAND WASH/WOOL
•Only woolen items that are designated as
Machine-Washable should be washed in this washing machine
•Wash only small loads for optimum fabric care
(less than 8 pounds)
•Only neutral (wool safe) detergents should be used (Only a small quantity of detergent is needed due to the small load size and low volume of water in the cycle.)
•The HANDWASH/WOOL cycle uses a gentle tumble action and low speed spin for ultimate fabric care
The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the
®products are washed according to the instructions on the garment label and those issued by the
manufacturer of this washing machine, M0807
Certified by NSF
Certificado por NSF
NSF International (formerly the National Sanitation Foundation), certifies that SANITARY cycle reduces 99.9% of bacteria
on laundry, and none of bacteria will carry over onto the next laundry load.
COLDWASHTM cycles include the
BULKY/LARGE, DELICATES, PERM.
PRESS, COTTON/NORMAL, HEAVY
DUTY, HANDWASH/WOOL , and SPEED WASH cycles.
Adding the COLDWASHTM option to these cycles provides reduce energy usage and same washing performance as warm wash. By using 6 different washing motion (Tumbling, Rolling, Stepping, Scrubbing, Swing, Filtration), fabrics get the cleaning benefits, without the energy usage.
To Add COLDWASH™ to a Standard Cycle:
1Turn on the washer and turn the cycle selector knob to select a cycle with the COLDWASH™ option.
2Press the COLDWASH™ button. The washer will automatically adjust the cycle settings.
3Set any other desired options.
4Press the START/PAUSE button to start the cycle. The washer will start automatically.
IMPORTANT NOTES ABOUT COLDWASH™ CYCLES:
•When you select the COLDWASH™ option, wash time will be increased up to 10 minutes.
•For high wash efficiency, it is recommended to use less than 8 pounds.
26
MFL62526846_en_101116.indd 26 |
2010.11.16 10:59:28 AM |
C A R E A N D C L
E
A N I
N G
REGULAR CLEANING
wWARNING:
•Unplug the washer before cleaning to avoid the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer.
They will damage the finish.
Cleaning the Exterior
Proper care of your washer can extend its life. The outside of the machine can be cleaned with warm water and a mild, nonabrasive household
detergent.Immediately wipe off any spills with a soft, damp cloth.
IMPORTANT: Do not use methylated spirits, solvents, or similar products.
Never use steel wool or abrasive cleansers; they can damage the surface.
Care and Cleaning of the Interior
Use a towel or soft cloth to wipe around the washer door opening, door seal, and door glass. These areas should be kept clean to ensure a watertight seal. Be sure to wipe under the inside rubber seal to remove any moisture or soil.
Always remove items from the washer as soon as the cycle is completed. Leaving damp items in the washer can cause wrinkling, color transfer, and odor. Run the TUB CLEAN cycle regularly to remove detergent buildup and other residue.
NOTE: If you use the TUB CLEAN cycle on a monthly basis, the wash drum will be kept clean.
Removing stains on the Door Seal
NOTE: Wear rubber gloves and eye protection while performing the following procedure:
1Dilute ¾ cup (177 ml) liquid chlorine bleach with 1 gallon (3.8 L) of warm/hot water.
2Use this solution to wipe down all surfaces of
the gasket to remove the deposits that are causing any odor. (Be sure to fold back the lip of the gasket to get under the edge where residue can build up.)
3Wipe the gasket with a dry cloth.
4Leave the door open to allow the gasket to dry completely.
Do not use undiluted bleach as this will damage the gasket. Follow the manufacturer’s instructions for proper use of bleach. If the gasket cannot be cleaned properly, it should be replaced.
Read these instructions carefully before beginning the TUB CLEAN cycle.
1Open the door and remove any clothing in the wash drum.
2Open the dispenser drawer.
3Add liquid chlorine bleach or tub cleaner.
Some powder or tablet tub cleaners which are manufactured for this purpose can be used.
(NOTE : Do not add any laundry detergent or fabric softener to the drawer when using TUB CLEAN.)
-If using liquid chlorine bleach
Add liquid chlorine bleach to the bleach compartment of the drawer.
(NOTE : Do not exceed the maximum fill line and do not pour undiluted liquid bleach directly into the wash drum.)
-If using powder cleaner
Remove the liquid detergent cup and add powder cleaner to the main wash compartment of the drawer.
-If using tablet cleaner
Add tablet cleaner to the wash drum directly.
(NOTE : Do not add tablet cleaner to the drawer.)
4Close the drawer and washer door.
5Select TUB CLEAN and press START.
NOTE : It is recommended that TUB CLEAN should be repeated monthly.
If mildew or musty smell already exists, run TUB CLEAN for 3 consecutive weeks.
After TUB CLEAN is complete or when the washer is not used, leave the washer door open for better ventilation and drying inside of the washer.
<![endif]>ENGLISH
27
MFL62526846_en_101116.indd 27 |
2010.11.16 10:59:28 AM |
C A R E A N D C L
E
A N I
N G
REGULAR CLEANING (cont.) |
CLEANING THE WASHER |
Storing the Washer
If the washer will not be used for an extended period of time and is in an area that could be exposed to freezing temperatures:
1Turn off water supply tap.
2Disconnect hoses from water supply and drain water from hoses.
3Plug the power cord into a properly grounded electrical outlet.
4Add 1 gallon of nontoxic recreational vehicle (RV) antifreeze to the empty wash drum. Close door.
5Select the spin cycle and let washer spin for
1 minute to drain out all the water.
NOTE: Not all of the RV antifreeze will be expelled.
6Unplug the power cord, dry the drum interior with a soft cloth, and close the door.
7Remove the inserts from the dispenser. Drain any water in compartments and dry the compartments.
8Store the washer in an upright position.
9To remove the antifreeze from the washer after storage, run washer through a complete cycle using detergent. Do not add laundry!
Removing lime buildup
If you live in an area with hard water, lime scale can form on internal components of the washer. Use of a water softener is recommended in areas with hard water. If a descaler is used, make sure that it is suitable for use in a washer, and run the TUB CLEAN cycle before washing clothing. Lime scale and other spots may be removed from the stainless steel drum using a stainless steel cleaner. Do NOT use steel wool or abrasive cleansers; they can damage the surface.
Notice of tub clean activation
To clean up the tub, please select the tub clean course. Please empty the tub and insert bleach into the detergent dispenser and push the tub clean button.
Keep door open
It is recommended to leave the door open after finishing the laundry to keep the tub clean.
NOTE: Weekly cleaning of the detergent dispenser will ensure problem free operation.
Cleaning the Dispenser
The dispenser should be cleaned periodically to remove buildup from detergent and other laundry products.
1Pull out the dispenser drawer until it stops. Press the button in the center of the drawer and pull to remove the drawer.
2Remove the inserts from the drawer, and clean them with warm water and a soft cloth or brush to remove any residue or buildup.
Wipe out the inside of the drawer opening with a damp cloth. Reassemble the drawer and reinstall in the drawer opening.
NOTE: Do not use anything other than water to clean the drawer, inserts, and drawer opening. If any sort of household cleaner
drains into the interior of the washer, run a RINSE+SPIN cycle before washing clothes.
28
MFL62526846_en_101116.indd 28 |
2010.11.16 10:59:29 AM |
MAINTENANCE
Cleaning the water inlet filters
If the washer detects that water is not entering the dispenser, an error message will show on the display. If you live in an area with hard water, this may be caused by clogged inlet filters.
IMPORTANT: Use extreme care when removing and cleaning the filters. If the filters cannot be cleaned or are damaged, do NOT operate the washer without the inlet filters. Contact LG Customer Service or a qualified LG servicer.
C A R E A N D C L
E
A N I
N G
IMPORTANT: Use ONLY the inlet hoses provided |
<![if ! IE]> <![endif]>ENGLISH |
|
|
by LG with this laundry product. Aftermarket |
|
hoses are not guaranteed to fit or function |
|
correctly. Other hoses may not tighten correctly |
|
and could cause leaks. Subsequent damage to |
|
product or property will not be covered under the |
|
terms of LG's warranty. |
|
Inlet Filter
1Turn off both water taps completely. Unscrew the hot and cold water lines from the back of the washer.
2Carefully remove the filters from the water inlets, and soak them in white vinegar
or a lime scale remover, following the manufacturer’s instructions. Rinse thoroughly before reinstalling.
Press the filters back into place and reattach the water lines. Do NOT operate the washer without the inlet filters.
29
MFL62526846_en_101116.indd 29 |
2010.11.16 10:59:29 AM |
C A R E A N D C L
E
A N I
N G
MAINTENANCE (cont.)
Cleaning the Drain Pump Filter
Lint and other objects may accumulate and clog the drain pump filter. If the washer fails to drain properly, unplug the washer and allow the water to cool, if necessary, before proceeding.
1 Open the drain pump filter access panel.
Drain Hose
2Unclip the drain hose and pull it out. Place the end of the drain hose in a pan, bucket, or floor drain to catch water.
30
Pump
Filter
Plug
3Remove the plug from the drain hose, and allow the water to drain completely.
Twist the pump filter counterclockwise to remove. Remove any lint and foreign objects from the pump filter.
Reverse the above steps to reinstall the drain pump filter and drain hose. Be sure to close the cover panel when finished.
Pump Filter
4Twist the pump filter counterclockwise to remove. Remove any lint and foreign objects from the pump filter.
Reverse the procedures described in the steps above to reinstall the filter and drain plug. Be sure to close the cover.
MFL62526846_en_101116.indd 30 |
2010.11.16 10:59:31 AM |