LG WM2250CW User Manual [en, es]

Zei76l7l7Z9ndlAI

RELEASING THIS DRAWING WITHOUT PERMISSIONG Electronics SHOULD BEACCUSED ACCORDING TO THE LAWS ADN COMPANY RULES.

i®*LGEPNl^,iftHW,

SEC.

WORK

BRAND

®LG

LHVsGood

MODEL

WM2250C*

P/NO.

MFL67449437 ver.031912.00

PRINTING DEGREE

EXTERIER

1 1

INTERIER

MATERIALANDPRINTINGDESCRIPTION

80g

LG MODEL NAME

F12A1FDP.ABWEEUS

SUFFIX

ABWEEUS

LANGUAGE

English/ Spanish

PAGE

REMARK

27inch Next3 North-America

English Panel

280

220

5. ^^^^^^ti±tM(Pb,Cd,Hg,Cr+6,PBB,PBDE),#^rtti^LGEPN-Z-1023.

<< NOTES >>

1. Material,printing and exterier size are refer to work tables.

2. Printing, tsxt size and line are based on LG desing film.

3. Exterier size on the drawing is cutting line.

4. Before product controlled by criteria sample.

5. The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE) and detailsShould comply with LGEPN-Z-1023.

./2 .

/4.

REV .N o.

REV ISI ON DESC RIP TIO N

RER .N O.

DATE PRE PA RED

APP RO VA LED

MODELING DESIGNED

LGEPN LG Electronics Inc.

Unit

REVIEWED

mm SCALE

CHECKED

MHm

RELATED DRAWING

MFL67360427

APPROVALED

DWG. No.

MANUAL,OWNER'S

DRUM-EXPORT 1/1

MFL67449437

WASHING MACHINE

Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the washer is installed correctly and safely. Leave these instructions near the washer after installation for future reference.

WM2250C^

P/No.:MFL67449437

www.lg.com

2 PRODUCT FEATURES

PRODUCT FEATURES

INVERTER DIRECT-DRIVE MOTOR

The inverter motor, which is directly connected to the tub, minimizes energy loss and produces little noise and vibration.

SMARTDIAGNOSIS™

Should you experience any technical difficulty with your washing machine, it has the capability of transmitting data by phone to the Customer Information Center. The call center agent records the data transmitted from your machine and uses it to analyze the issue, providing a fast and effective diagnosis (Refer to page 37).

TUB CLEAN

Regaular cleaning of the tub on a monthly basis using TUB CLEAN can help keep the tub clean and fresh.

MAGNETIC DOOR PLUNGER

Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will promote air circulation and allow the interior of the machine to dry. To use this feature, after the load has been removed, do not close the door completely. When the magnetic door plunger comes into contact with the metal washer cabinet, it will secure the door slightly open allowing the interior of the washer to dry.

LARGE CAPACITY STAINLESS STEEL DRUM

The large capacity stainless steel drum offers extreme durability and is tilted to improve efficiency and allow easier access for large items.

CHILD LOCK

Use this option to disable the controls during a wash cycle. This option can prevent children from changing cycles or operating the machine.

DETERGENT DISPENSER DRAWER

The four-compartment dispenser drawer makes it easy to separate the pre-wash detergent, the main laundry detergent, liquid bleach, and fabric softener into different compartments.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

A WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to

prevent property damage, injury to persons, or death.

Your Safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

^ This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION. These words mean:

ADANGER

You will be killed or seriously injured if you don't immediately follow instructions.

A WARNING

You can be killed or seriously injured if you don't follow instructions.

A CAUTION

You may be slightly injured or cause damage to the product if you do not follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

AWARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to

prevent property damage, injury to persons, or death.

BASIC SAFETY PRECAUTIONS

AWARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

Before use, the washer must be properly installed as

described in this manual.

Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as

they give off vapors that could ignite or explode.

Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water.

These substances give off vapors that could ignite or explode.

Under certain conditions, hydrogen gas may be produced

in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using the washer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is

used near children.

Before the washer is removed from service or discarded,

remove the door to prevent children from climbing inside.

Do not install or store the washer where it will be exposed to the weather or freezing temperatures.

Do not tamper with controls.

• Do not repair or replace any part of the washer or attempt any servicing other than as described in this manual. We

strongly recommend that any service be performed by a qualified technician.

• See Installation Instructions for grounding requirements.

• ALWAYS follow the fabric care instructions supplied by the garment manufacturer.

• Do not place items exposed to cooking oil in your washer.

Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

• Use fabric softeners or products to eliminate static only as recommended by the manufacturer.

• This washer is not designed for maritime use or for mobile installations such as in RVs, aircraft, etc.

• Turn off the water faucets and unplug the washer if the machine is to be left for an extended period of time, such as during vacations.

• Do not use to dry articles containing foam rubber or similarly textured rubber-like materials.

• Packaging material can be dangerous for children. There is a risk of suffocation! Keep all packaging from children.

• Always check the inside of the washer for foreign objects before loading laundry. Keep the door closed when not in use.

• Do not reach into the appliance if the tub or agitator is moving.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

AWARNING

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

AWARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to

prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR INSTALLATION

AWARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

Refer to INSTALLATION INSTRUCTIONS for detailed

grounding procedures. Installation instructions are packed

with the washer for installer's reference. If the washer is

moved to a new location, have it checked and reinstalled by a qualified service technician. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

Do not, under any circumstances, cut or remove the third

(ground) prong from the power cord. Failure to follow this

warning can cause serious injury, fire, electric shock, or death.

For personal safety, this appliance must be properly grounded. Failure to follow this warning can cause serious

injury, fire, electric shock, or death.

The power cord of this appliance is equipped with a 3-prong

(grounding) plug which mates with a standard 3-prong

(grounding) wall outlet to minimize the possibility of electric

shock from this appliance.

This washer must be plugged into a 120 VAC, 60 Hz grounded outlet Failure to follow this warning can cause

serious injury, fire, electric shock, or death.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

Where a standard 2-prong wall outlet is encountered, it

is your personal responsibility and obligation to have it

replaced with a properly grounded 3-prong wall outlet.

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

Do not install on carpet. Install washer on a solid floor.

Failure to follow this warning can cause serious leak damage.

Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3j3rong outlet. Failure

to follow these warnings can cause serious injury, fire, electric shock, or death.

The washer should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. This provides the best performance and also

prevents overloading house wiring circuits which could cause a fire hazard from overheated wires. Never unplug your washer by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

Repair or immediately replace all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. Failure to follow this warning can cause serious

injury, fire, electric shock, or death.

When installing or moving the washer, be careful not to pinch, crush, or damage the power cord. Failure to follow

this warning can cause serious injury, fire, electric shock, or death.

The washer must be installed and electrically grounded by a qualified service person in accordance with local codes to

prevent shock hazard and assure stability during operation.

The washer is heavy. Two or more people may be needed to install and move the appliance. Failure to do so can result

in back or other injury.

Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to follow this warning can cause

serious leak damage.

Do not install the washer in humid spaces to reduce the risk of electric shock. Failure to follow this warning can cause

serious injury, fire, electric shock, or death.

To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of

the safety warnings in this manual could result in property damage, injury to persons or death.

6 IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

A WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

SAFEPT INSTRUCTIONS FOR USE. CARE. CLEANING. AND DISPOSAL

A WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

Unplug the washer before cleaning to avoid the risk of electric shock.

Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish. Do not put oily or greasy rags or clothing on top of the washer. These substances give off vapors that could ignite

the materials.

Do not wash items that are soiled with vegetable or cooking oil. These items may contain some oil after laundering. Due

to the remaining oil, the fabric may smoke or catch fire by itself.

Disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply. Failure to follow this warning can cause

serious injury, fire, electric shock, or death.

Do not combine laundry products for use in one load unless specified on the label. Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow package directions when using laundry products. Incorrect usage can produce poisonous gas,

resulting in serious injury or death.

Do not reach into the washer while parts are moving.

Before loading, unloading, or adding items, press the START/

PAUSE button and allow the drum to coast to a complete stop before reaching inside. Failure to follow this warning

can cause serious injury, fire, electric shock, or death.

Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. As children grow, teach them the proper, safe use of all appliances. Failure to comply with

these warnings could result in serious injury to persons or death.

Destroy the carton, plastic bag, and other packing materials after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers. Failure to comply

with these warnings could result in serious injury to persons or death.

Keep laundry products out of children's reach. To prevent injury to persons, observe all warnings on product labels.

Failure to comply with these warnings could result in serious injury to persons or death..

Remove the door to the washing compartment to avoid the danger of children or small animals getting trapped inside before your washer is removed from service or discarded.

Failure to do so can result in serious injury to persons or death.

Make sure the dispenser drawer is closed at all times when not being filled with laundry products. Failure to keep the

drawer closed can result in personal injury or flooding.

SAVE THESE INSTRUCTIONS

TABLE OF CONTENTS

PRODUCT FEATURES

3 IMPORTANT SAFETY INSTRUCTIONS

4 BASIC SAFETY PRECAUTIONS 4 GROUNDING INSTRUCTIONS 5 SAFETY INSTRUCTIONS FOR INSTALLATION 6 SAFETY INSTRUCTIONS FOR USE, CARE, CLEAN

ING, AND DISPOSAL

8 INTRODUCING YOUR WASHING MACHINE

8 Parts and Accessories 9 Control panel features

I 1 INSTALLATION INSTRUCTIONS

II Preview installation order 12 Checking and choosing the proper location 13 Unpacking and removing shipping bolts 14 Connecting the water lines 15 Connecting the drain line 16 Leveling the washing machine 17 Plugging in the power cord and grounding 17 Test run

18 PREPARATION________________________

18 Sorting wash loads 18 - Precautions for fabric care before wash cycle 19 - Fabric care labels

19 - Sorting laundry 20 Using detergent/fabric softener 20 - Recommended detergent 20 - Loading the dispenser

25 Cycle setting buttons 25 Setting options before cycle 25 - Setting the water temperature, WASH TEMP. 25 - Setting spin speed, SPIN SPEED 25 - Setting soil level of laundry, SOIL LEVEL 26 - Prewashing, PRE-WASH 26 - Rinse, drain and spin only, RINSE + SPIN 26 - Adding extra rinse cycle, EXTRA RINSE 26 - Adding extra water to the washing and rinse

cycle, WATER PLUS 26 - Presetting the start time, DELAY WASH 26 - Tumbles clothes to prevent wrinkle, FRESH CARE 27 - Saving energy, COLDWASH™ 27 - Tuning on/off melody and button tones, SIGNAL

ON/OFF 27 Setting options during cycle 27 - Button lock feature, CHILD LOCK

28 MAINTENANCE

28 Care 28 - Care after wash 28 - Care in cold climates 29 Cleaning 29 - Clean your the drum, TUB CLEAN 30 - Cleaning the detergent dispenser drawer 31 - Cleaning the water inlet filters 32 - Cleaning the drain pump filter 33 - Cleaning the door seal

______________________

34 TROUBLESHOOTING

34 Checking error messages 35 Before calling for service

22 USINGYOUR WASHING MACHINE

22 Basic operation 23 Cycle guide 24 Main cycle 24 - Blankets or bulky items, BULKY/LARGE 24 - Normal items, COTTON/NORMAL 24 - Wrinkle free items, PERM. PRESS 24 - Sheer items, DELICATES 24 - Items labeled wool or hand-washable, HAND

WASH/WOOLÔ

24 - Quick wash, SPEED WASH

36 SPECIFICATIONS 37 USING SMARTDIAGNOSIS™ 38 WARRANTY

8 INTRODUCING YOUR WASHING MACHINE

INTRODUCING YOUR WASHING MACHINE

Parts and Accessories

Parts

Accessories

----------------------

Included Accessories

Hot/co!d water hoses Non-skid pads

Wrench Tie strap Elbow bracket

(for securing drain hose)

Caps for covering

shipping bolt holes

Optional Accessories

Pedestal

14'Pedestal Color

WDP4C Chardonnay CSTK1 Chardonnay WDP4R Wild Cherry Red WDP4S Titanium SSTK1 WDP4V WDP4W White WDP4N Midnight Blue NSTK1

Graphite Steel GSTK1 Pearl Gray

Stacking kit

Stacking Kit Color

RSTK1 Wild Cherry Red

Titanium

WSTK1 White

Midnight Blue

©NOTE-----------------------------------------------------------------------------------------------

• Contact LG Customer Service at 1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are missing.

• For your safety and for extended product life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of separately purchased unauthorized components or parts.

• The images in this guide may be different from the actual components and accessories, and are subject to change by the manufacturer without prior notice for product improvement purposes.

Control panel features

INTRODUCING YOUR WASHING MACHINE

Operation

Button

Cycle selector

Turns the washing machine on and off. (During the wash cycle) stops operation, and cancels the settings.

Button

Operation

Selection Button

Description

Display

Selection Button

ALI C0U3 flINSES

DELICATES

handw/^h/woolA

SPEED WASH

BULKY/LARGE

- For blankets or large bulky items (See page 24)

PERM. PRESS

- For wrinkle-free fabrics (See page 24)

COTTON/NORMAL

- For general laundry, such as cotton T-shirts or towels (See page 24)

DELICATES

- For sheer and delicate fabrics (See page 24)

HANDWASH/WOOLÔ

- For wool or hand-wash fabrics (See page 24)

SPEED WASH

- For small quantities of lightly soiled items (See page 24)

TUB CLEAN

- (Press and hold) Clean the wash tub (See page 29)

Starts or pauses the washing machine cycle.

- If you do not press the (wj) button within 4 minutes of selecting a cycle, the washing machine will turn off automatically.

(Press repeatedly) Selects the water temperature for the wash cycle (See page 25).

- Select water temperature from 5 settings.

(Press repeatedly) Selects the spin speed in the desired level (See page 25).

- Selects spin speed from 5 settings.

(Press repeatedly) Selects a wash cycle by soil level (See page 25).

- Selects soil level from 5 settings.

10 INTRODUCING YOUR WASHING MACHINE

Operation (continued)

Button

O PRE-WASH

«CHILD LOCK

O RINSE+SPIN

O EXTRA RINSE

WATER PLUS

«SIGNAL ON/OFF

O DELAY WASH

FRESH

CARE

Description

(Press before wash cycle) Pre-wash heavily soiled laundry (See page. 26). (Press and hold during wash cycle) Lock/Unlock the button (See page. 27).

RINSE + SPIN

- For items that only require rinsing and spinning (See page 26).

(Press before wash cycle) Add extra rinse cycle to the selected one (See page. 26).

(Press before wash cycle) Add water during wash and rinse cycle (See page. 26). (Press and hold) Tuning on/off melody and button tones (See page. 27).

Set delay time of starting cycle (See page. 26).

Use this option for heavily soiled loads that need improved stain treatment (See page. 26).

Display

tOLD

WASH^

iMl

LOAD

SIZE

Use this option to save your energy consumption (See page. 27).

Load size sensing indicator Door lock (See page. 27) indicator

PROCESSING

SENsRg R'NSE spin I

1 . 1

Cycle process indicator

EST.TIME REMAINING

Delay Estimated time remaining/ wash error message display indicator (See page 34)

hOn

I'^IU

Button Description

• At the beginning of the cycle, the washer tumbles the load and detects the weight of the clothes.

LOAD

St^

SEN^G rinse spin

The display will indicate the approximate load size in the LOAD SIZE display. This allows you to adjust the amount of detergent and other additives for best results and improved efficiency.

• This portion of the display shows which stage of the wash cycle is currently undenway (LOAD SENSING, WASH, RINSE or SPIN).

• Indicates that the door is locked. The washer door will lock while the washer is operating. The door can be unlocked by pressing the START/ PAUSE button to stop the washer.

hO n IJ U

• This indicator shows that the washer has been set for DELAY WASH. The washer will start automatically after the set delay time has passed.

• When the START/PAUSE button is pressed, the washer automatically detects the wash load (weight) and optimizes the washing time, based on the selected cycle and options. The display will then indicate the estimated time remaining for the selected wash cycle.

INSTALLATION INSTRUCTIONS

Preview installation order

INSTALLATION INSTRUCTIONS 11

Checking and choosing the

proper location

Connecting the drain line Leveling the washing

Unpacking and removing

shipping bolts

machine

Connecting the water line

Plugging in the power cord

and grounding

A WARNING------------------------------------------------------------------------------------------

► Washer is heavy! Two or more people are required when moving and unpacking the washer. Failure to do so can result in

back or other injury.

• Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

► Properly ground washer to conform with all governing codes and ordinances. Failure to follow this warning can cause

serious injury, fire, electric shock, or death.

» To reduce the risk of electric shock, do not install the washer in humid spaces. Failure to follow this warning can cause

serious injury, fire, electric shock, or death. » The base opening must not be obstructed by carpeting when the washer is installed on a carpeted floor. ► Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet. Failure to

follow this warning can cause serious injury, fire, electric shock, or death.

12 INSTALLATION INSTRUCTIONS

Checking and choosing the proper

location

Install the washing machine on a solid floor that is strong and

rigid enough to support the weight of the washing machine, even when fully loaded, without flexing or bouncing. If the floor has too much flex, you may need to reinforce it to make

it more rigid. If the floor is not solid, it may cause severe vibration and noise.

1 Clean the floor before installation.

- Make sure to select solid and smooth ground.

2 Two or more people are needed for moving and

unpacking the washing machine.

3 Allow for sufficient space between the walls and the

washing machine for installation.

Space requirements

You must allow sufficient space for water lines, the drain

line, and airflow.

O NOTE

Be sure to allow for wall, door, or floor moldings that

may increase the required clearances.

O NOTE-

The floor must be strong and rigid enough to support the weight of the washer, when fully loaded, without

flexing or bouncing. If your floor has too much flex, you may need to reinforce it to make it more rigid. A floor that is adequate for a top-loading washer may not be rigid enough for a front loading washer, due to the difference in the spin speed and direction. If the floor is not solid, your washer may vibrate and you may hear and feel the vibration throughout your house. Before installing the washer, make sure the floor is clean, dry and free of dust, dirt, water and oils so the washer feet can not slide easily. Leveling feet that can move or slide on the floor can contribute to excess vibration and noise due to poor contact with the floor.

If a drip pan must be used, take extra care to follow the instructions provided with the drip pan and make sure the leveling feet are adjusted for firm and even contact with the pan. Use of drip pans and failure to properly level the machine may result in increased vibration and noise during operation.

Installing on a pedestal or stacking kit

Installing on a floor

O NOTE-

Refer to the instructions packaged with the optional PEDESTAL or STACKING KIT before installing with a PEDESTAL or a STACKING KIT.

INSTALLATION INSTRUCTIONS 13

Unpacking and removing shipping bolts

When removing the washer from the carton base, be sure to

remove the foam drum support in the middle of the carton

base.

If you must lay the washer down to remove the base

packaging materials, always lay it carefully on its side.

Do NOT lay the washer on its front or back.

Support

1 Remove the bottom two shipping bolts with the wrench

(included) to fully loosen all four shipping bolts by turning them counterclockwise and then pulling them out.

2 Locate the four hole caps included in the accessory pack

and install them in the shipping bolt holes.

O NOTE-

Save the bolt assemblies for future use. To prevent damage to internal components, DO NOT transport the washer without reinstalling the shipping bolts.

Failure to remove shipping bolts and retainers may cause severe vibration and noise, which can lead to permanent damage to the washer. The cord is secured to the back of the washer with a shipping bolt to help prevent operation with shipping bolts in place.

14 INSTALLATION INSTRUCTIONS

Connecting the water lines

1 Check the rubber seals on both sides of the hose.

- Insert a rubber seal into the threaded fittings on each hose to prevent leaking.

Rubber seal

Water hose (To faucet)

(To water inlet on the washing machine)

Connect the water supply hoses to the HOT and COLD water faucets tightly by hand and then tighten another 2/3 turn with pliers.

- Connect the blue hose to a cold water faucet and the red hose to a hot water faucet.

A WARNING

• Do not overtighten. Damage to the coupling can result.

3 After connecting inlet hose to water faucets, turn on the

water faucets to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket, and check the water temperature.

------------------------------

4 Connect the hoses to the water inlets tightly by hand and

then tighten another 2/3 turn with pliers.

- Connect the blue hose to the cold water inlet and the red hose to the hot water inlet.

• Hot water

Inlet

A WARNING

* Do not overtighten the hoses. Overtightening can

damage the valves resulting in leaking and property damage.

5 Check for leaks by turning on the faucets.

- If water leaks, check steps 1 to 4 again.

rO NOTE

For your safety, and for extended product life, use

only authorized components. The manufacturer is not

responsible for product malfunction or accidents caused

by the use of separately purchased unauthorized parts.

Use new hoses when you install the washing machine. Do not reuse old hoses. Use only the inlet hoses

provided with the washer. LG does not recommend the

use of aftermarket hoses. Periodically check the hoses for cracks, leaks and wear,

and replace the hoses every 5 years.

Do not stretch the water hoses intentionally, and make sure that they are not crushed by other objects. Water supply pressure must be between 14.5 PSI and

116 PSI (100-800 kPa). If the water supply pressure is

more than 116 PSI, a pressure reducing valve must be

installed. To provide optimum washing performance the hot water temperature should be set at 120-135°F (48-57°C) and the cold at 60°F (15°C).

--------------------------------------

---------------------------

INSTALLATION INSTRUCTIONS 15

Connecting the drain line

Secure the drain hose in place to prevent moving and leaking.

O NOTE---------------------------------------.

The drain hose should be properly secured. Failure to properly secure the drain hose can result in flooding and malfunction. Total height of the house end should not exceed 96 inches (244.8 cm) from the bottom of the washer. The drain must be installed in accordance with any applicable local codes and regulations.

Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

Using a standpipe

1 Clip the end of the hose into the elbow bracket.

- Connect the elbow bracket within 4 inches (10 cm) from the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold or microorganisms could spread to the inside of the washer.

Using a laundry tub

1 Clip the end of the hose into the elbow bracket.

- Connect the elbow bracket within 4 inches (10 cm) from the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold, or microorganisms could spread to the inside of the washer.

2 Hang the end of the drain hose over the side of the

laundry tub.

2 Insert the end of the drain hose into the standpipe.

3 Use a tie strap to secure the drain hose in place.

16 INSTALLATION INSTRUCTIONS

Leveling the washing machine

The washer tub of your new washing machine spins at very

high speeds. To minimize vibration, noise, and unwanted movement, the floor must be perfectly level and solid.

1 Check the washing machine's level.

- Check the precise level by rocking the top edges of the washing machine or placing a level on the washing machine. The slope beneath the washing machine must not exceed 1°, and all four leveling feet must rest firmly on the floor.

Level

2 Turn the lower leveling feet clockwise to level the

washing machine.

- Turning the lower leveling feet clockwise raises the washing machine.

Check the washing machine's level again.

- Push or rock the top edges of the washing machine gently to make sure that the washing machine does not

rock.

- If the washing machine rocks, repeat steps 1 to 3.

A WARNING

Using the washing machine without leveling, it may result in malfunction caused by the production of excess vibration and noise.

If you are installing the washing machine on the optional pedestal, you must adjust the leveling feet on the pedestal to level the washing machine. The washing machine's leveling feet should be minimized and turn the locknuts counterclockwise to secure.

Use the leveling feet only when you level the washing

machine. If you raise the leveling feet unnecessarily, it

may cause abnormal vibration of the washing machine.

Using non-skid pads (optional)

If you install the washing machine on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. In the event of this, lay the non-skid pads under the leveling feet and adjust the level.

-------------------------------

Raise

3 Turn the locknuts counterclockwise and tighten them

when the washing machine is level.

Tighten all 4 lock

nuts securely using

the wrench.

1 Clean the floor to attach the non-skid pads.

- Use a dry rag to remove and clean foreign objects or moisture. If moisture remains, the non-skid pads may

slip.

2 Adjust the level after placing the washing machine in the

installation area.

3 Place the adhesive side of the non-skid pad on the floor.

- It is most effective to install the non-skid pads under the

front legs. If it is hard to place the pads under the front

legs, place them under the back legs.

This side up

0_x

Adhesive^ side

Remove backing

4 Check the washing machine's level again.

- Push or rock the top edges of the washing machine

gently to make sure that the washing machine does not

rock. If the washing machine rocks, level the washing machine again.

INSTALLATION INSTRUCTIONS 17

Plugging in the power cord and

grounding

Make sure to ground the washing machine to prevent a short circuit or an electric shock when plugging in.

Using a 3-prong outlet

Plug in the electrical outlet without additional grounding.

A WARNING

* The power outlet must be within 60 inches (1.5 m) of either

side of the washer.

* The appliance and outlet must be positioned so that the plug

is easily accessible.

* Do not overload the outlet with more than one appliance. * The outlet must be grounded in accordance with current

wiring codes and regulations.

* Time-delay fuse or circuit breaker is recommended. * It is the personal responsibility and obligation of the product

owner to have a proper outlet installed by a qualified electrician.

* Do not use a worn or damaged power cord or power plug.

Replace or repair it immediately. Failure to do so may result

in death, fire, electric shock, or malfunction.

* Do not modify the power cord and take care not to damage it

when installing or moving the washing machine. Failure to do

so may result in death, fire, electric shock, or malfunction.

* Make sure that the washing machine is grounded. * Connect this washing machine to a grounded outlet

conforming to the rating prior to use. Failure to do so may

result in fire, electric shock, or malfunction.

* Do not use adaptors or extension cords. The washing

machine should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. Failure to do so may result in fire, electric shock or disorder.

* Do not damage or cut off the ground prong of the power

cord. Doing so may cause death, fire, electric shock, or

product malfunction.

--------------------------------

Test run

Check if the washing machine is properly installed and run a test cycle.

1 Load the washing machine with 6 pounds of laundry. 2 Press (5)

3 Press 4 Press (^.

5 Check if water is supplied, that the washing machine

O RINSE-tSPIN

- The wash cycle starts.

does not rock or vibrates excessively, and that it drains well during the spin cycle.

- If water leaks during water supply, see page 14,

Connecting the water lines to connect them properly.

- If the washing machine rocks and vibrates excessively,

see page 16, Leveling the washing machine to level it again.

- If the drain does not work, see page 15, Connecting the drain line to install it properly.

18 PREPARATION

PREPARATION

Sorting wash loads

Precautions for fabric care before wash cycle

Read and observe the following to prevent shrinkage or damage to clothes.

♦ Check all pockets to make sure that they are empty.

-Items such as clips, matches, pens, coins, and keys can damage both your washer and your clothes.

♦ Close zippers, hooks, and drawstrings to prevent these

items from snagging or tangling on other clothes.

♦ Pretreat heavily stained areas before washing.

- Doing so will produce clean, stain-free results.

♦ Combine large and small items in a load. Load large items

first.

♦ Large items should not be more than half of the total

washload.

♦ The washer can be fully loaded, but the drum should not be

tightly packed with items.

-The door of the washer should close easily.

♦ Do not wash single items, except for bulky items such as

blankets. Make sure to wash laundry in similar types of loads.

- Washing a single small item may result in the tub becoming unbalanced, vibrating and making a noise.

Brush heavy soil, dust, or hair off fabrics before washing.

- Laundry may not wash clean if there is dirt or sand on the fabrics, or they may damage due to particles rubbing against sheer fabrics.

Wash blankets individually.

- Washing more than one blanket together may produce unclean results due to tangling or an unbalanced load.

Always separate fabrics according to their colors and wash them separately to prevent colors from running.

- Fabrics may damage or become stained due to fabric dyes running, or due to foreign objects transferring from one fabric to another.

♦ Do not wash waterproof clothes.

- This may cause abnormal vibration, or may cause the load to bounce, which could damage the tub.

♦ Check if there are any other foreign objects in the door seal

and take extra care that clothes do not get caught there.

- Foreign objects in the door seal may stain clothes, and water may leak if clothes get caught in the door seal.

♦ Wash underwear or small, light items in a laundry net.

- Small, light items may get caught in the door seal, and a brassiere hook may damage other items or the tub.

Fabric care labels

Most articles of clothing feature fabric care labels that include

instructions for proper care.

PREPARATION 19

Category Label

Washing

Water Temperature

Bleach symbols

• • •

• •

•

Л A

Directions

Hand Wash

Machine Wash, Normal Cycle Use Permanent Press/Wrinkle

Resistant washing machine setting (which has a cool down or cold spray before the reduced spin)

Use Gentle/Delicate washing machine setting (slow agitation and/ or reduced wash time).

Do Not Wash

Do Not Wring

Hot

Warm

Cold/Cool

Any Bleach (When Needed) Only Non-Chlorine Bleach (When

Needed) Do Not Bleach

Sorting laundry

It is recommended that you sort laundry into similar loads

that are washable in the same cycle.

Refer to the following chart for sorting clothes

Colors Soil Fabric Lint Lint Producers / Lint Collectors

Whites / Lights / Darks

Heavy / Normal / Light Délicates / Easy Care / Sturdy Cottons

20 PREPARATION

Using detergent/fabric softener

Recommended detergent

Make sure to use HE (High-Efficiency) detergent for front loading washing machines. HE detergents dissolve more efficiently and produce fewer suds to ensure efficient

washing and rinsing. Use the correct amount of detergent as

indicated on the label of the detergent packaging.

Designed specially to use only HE (High-Efficiency) detergent

O NOTE--------------------------------------

• Only use HE detergents, since using a regular detergent may produce excessive suds.

•HE detergents produce fewer suds, dissolve more efficiently to improve washing and rinsing performance, and help to keep the interior of your washer clean.

• Use less detergent for soft water.

• Wipe up any spills immediately, as liquids could damage the finish and the control panel of the washing machine.

• Using too much detergent can cause a build-up in the tub resulting in unsatisfactory performance and

machine malfunction.

• If you use a detergent that does not dissolve easily or a detergent with high viscosity, it will leave a residue on the tub, which may not rinse properly.

Loading the dispenser

The detergent dispenser drawer of the washing machine has a dispenser compartment for each detergent type. Add the appropriate detergents into its respective compartments.

1 Pull out the detergent dispenser drawer.

Add the appropriate detergent to its allocated compartment.

- If you use a liquid detergent, check if the liquid detergent cup is in place.

- If you use a powdered detergent, remove the liquid detergent cup and put the powder in the main wash detergent compartment.

compartment compartment

3 Close the detergent dispenser drawer slowly.

- Slamming the detergent dispenser drawer may result in the detergent overflowing into another compartment or pouring into the tub earlier than programmed.

O NOTE

It is normal for a small amount of water to remain in the dispenser compartments at the end of the cycle.

PREPARATION 21

Pre-wash Detergent Compartment

Add [¡quid or powdered detergent to this compartment when using the pre-wash option. Always use HE (High-Efficiency) detergent with your washing machine.

O NOTE--------------------------------------

• If liquid detergent is to be used for the main wash when using the pre-wash option, the liquid detergent cup accessory must be used in main wash dispenser to prevent the main wash liquid detergent from being dispensed immediately.

• The amount of detergent added for the pre-wash option

is 1/2 the amount recommended for the main wash

cycle. For example, if the main wash cycle requires one

measure of detergent, add 1/2 measure for the pre

wash option.

Main Wash Detergent Compartment

This compartment holds laundry detergent for the main wash

cycle, which is added to the load at the beginning of the cycle. Always use HE (High-Efficiency) detergent with your washing machine. Never exceed the manufacturer's recommendations when adding detergent. Using too much detergent can result in detergent buildup in clothing and the washer. Either powdered or liquid detergent may be used.

o NOTE--------------------------------------

• Liquid or powdered color-safe bleach may be added to the main wash compartment with detergent of the

same type.

• When using liquid detergent, make sure the liquid

detergent cup and insert are in place. Do not exceed

the maximum fill line.

• When using powdered detergent, remove the insert

and liquid detergent cup from the compartment. Powdered detergent will not dispense with the liquid detergent cup and insert in place.

Liquid Bleach Compartment

This compartment holds liquid chlorine bleach, which will be dispensed automatically at the proper time during the wash cycle.

O NOTE--------------------------------------

• Do not add powdered or liquid color-safe bleach to this compartment.

• Always follow the manufacturer's recommendations when adding bleach. Do not exceed the maximum fill line. Using too much bleach can damage fabrics.

• Never pour undiluted liquid chlorine bleach directly onto the load or into the drum. Fabric damage can occur.

Fabric Softener Compartment

This compartment holds liquid fabric softener, which will be automatically dispensed during the final rinse cycle.

O NOTE

Always follow the manufacturer's recommendations when adding fabric softener. Do not exceed the maximum fill line. Using too much fabric softener may result in stained clothes.

Dilute concentrated fabric softeners with warm water. Do not exceed the maximum fill line. Never pour fabric softener directly onto the load or into

the drum.

22 USING YOUR WASHING MACHINE

USING YOUR WASHING MACHINE

Basic operation

Load the laundry into the washing machine and close the door.

Press (^.

- The lights around the cycle selector knob will illuminate and a chime will sound.

Turn to the desired cycle.

- The proper default option is automatically set according to the wash cycle. See page 23, Cycle guide, for more detailed default options for each cycle.

- See page 24, Main cycle, for details on the wash cycles.

- To change the options, press the option button and select the desired option. See page 25, Setting options before cycle, for more details on options.

- Skip to step 4 to use the default setting without changing the options.

Add the proper amount of detergent and additions (bleach, softener) into the detergent dispenser drawer.

- See page 20, Using detergenVfabric softener, for more details on using detergent.

Press (^.

- The washing machine will start.

When the melody plays, the wash cycle is finished.

- When the washing cycle is finished, the door will unlock. Open the door and remove the laundry immediately.

- Make sure to check around the door seal when taking out the finished load. Small items may be caught in the door seal.

A WARNING------------------------------------------------------------------------------------

To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

O NOTE------------------------------------------------------------------------------------------------

• The front-load washing machine rotates the laundry in a way that allows it to use less water while still fully saturating your clothing. It is normal to not be able to see water during the wash cycle.

• If the temperature or the water level inside the machine is too high, the door locks and cannot be opened. To open the door while washing, use the Rinse + SPIN feature.

Cycle guide

The cycle guide below shows the options and recommended fabric types for each cycle.

USING YOUR WASHING MACHINE 23

= Available option

BASIC OPTION {♦^DEFAULT) ADDITIONAL OPTIONS

WASH

TEMP.

HOT WARM^ ECO WARM COLD TAP COLD

ECO WARM COLD^

TAP COLD WARM*

ECO WARM COLD TAP COLD

HOT* WARM

ECO WARM COLD TAP COLD

SPIN

SPEED

(-)MEDIUM* (-)LOW (•INOSPIN

(=)HIGH HMEDIUM* (-)LOW (•)NOSPIN

HEXTRA HIGH {=)HIGH* HMEDIUM (-)LOW HNOSPIN

HMEDIUM* (-)LOW HNOSPIN

(-)LOW* HNOSPIN

NEXTRAHIGH* {=)HIGH HMEDIUM (-)LOW HNOSPIN

SOIL

LEVEL

HEAVY NORMAL* LIGHT

NORMAL* LIGHT

HEAVY NORMAL LIGHT*

PRE

WASH

RINSE-^

SPIN

EXTRA

RINSE

WATER

PLUS

• • • • • • •

• • • •

• • • • •

DELAY WASH

•

FRESE

CARE

CYCLE FABRIC TYPE

TUB CLEAN This cycle is

BULKY/ LARGE

PERM. PRESS

COTTON/ NORMAL

DELICATES Dress shirts/blouses,

HANDWASH/ WOOL#

SPEED WASH

designed to remove a mildewy

Large items such as blankets and comforters

Dress shirts/pants, wrinkle-free clothing, poly/cotton blend clothing, tablecloths

Cotton, linen, towels, shirts, sheets, jeans, mixed loads

nylons, sheer or lacy garments

Items labeled

"hand-washable"

Lightly soiled clothing and small loads

DISPLAY

TIME(MIN)

53^-61

49-74

41 WARM

Cycle time depends on water pressure, type and amount of load and chosen additional options.

To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available with every cycle.

COLD

WASH™

24 USING YOUR WASHING MACHINE

Main cycle

You can wash laundry items more thoroughly by selecting the wash cycle that best suits the type of items to be

washed. Turn the to the desired cycle. When you select a wash cycle, the light for the corresponding wash cycle will turn on. See page 22, Basic operation, for more details on operating methods.

Blankets or bulky itemsj BULKY/LARGE

This cycle is for washing blankets or bulky items.

Normal items, COTTON/NORMAL

Use this cycle to wash all normal items, except delicate

fabrics such as wool or silk.

O NOTE

• If you press (o) and then @ without selecting another cycle, the washing machine proceeds to

COTTON/NORMAL.

-----------------------------------

Items labeled wool or hand-washable,

HAND WASH/WOOL

This cycle is for washing shrinkable woolen or hand-washable items requiring delicate care. Only wash woolen items that are labeled machine washable or hand-washable.

о NOTE------------------------------------------

• Laundry weight should be less than 8 pound (3.6 kg) to prevent damage to the fabric.

• Use only natural or wool-safe detergent harmless to fabrics and load 1/2 of the normal amount of detergent.

• The HAND WASH/WOOL® cycle uses a gentle tumble rotation angle and low speed spin for the

ultimate fabric care.

The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the products are washed according to the instructions on the garment label and those Issued by the manufacturer of this washing machine, M0807

Quick wash, SPEED WASH

Wrinkle free items, PERM. PRESS

This cycle is for washing items such as wrinkle-free clothes or tablecloths to minimize wrinkles.

Sheer items, DELICATES

This cycle is for washing lingerie or sheer and lacy clothes which can easily be damaged.

Use the Speed Wash cycle to quickly wash lightly soiled clothing and small load. For high wash and rinse efficiency, it is recommended to wash small loads of 2-3 lightly soiled garments.

O NOTE

• Use a little detergent in this cycle. If you want more rinsing, you can add extra rinse by using the option button.

--------------------------------------

+ 56 hidden pages