LG WF-T1080TD Instruction manual

OWNER’S MANUAL

WASHING MACHINE

Please read this manual carefully before operating

your washing machine and retain it for future reference.

T8566TEDTJ

www.lg.com

2
		P	roduct Features
				Washer doesn’t operate while the lid is open. If the lid is open during the wash, rinse or spin
				cycles, the operation stops for safety.

FUZZY logic control

••A built-in load sensor automatically detects the laundry load and a microprocessor optimizes washing conditions such as ideal Water level and washing time.

START	SENSING	SETTING	WASHING	AUTO
	Laundry Sensor	Optimum		POWER
	Water Level Sensor	Washing		OFF
		Condition

••Advanced technology is built into the Electronic Control System which ensures the best washing result.

Turbo drum washing (option)

••When “Punch + 3” washing wings turn, the washing tub turns in the opposite direction. This makes the both sides current of water which improve wash-performance by rubbing clothes strongly.

3 Step washing

••3 step washing makes the best washing performance with low tangling.

Rubbing	Rubbing and	Shaking and
	Shaking	Disentangling

NOTE

Be sure to remove the unit from the carton base, otherwise the machine will not be able to operate properly.

3

ContentsREAD THIS MANUAL

Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your washer. You will find many answers to common problems in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.

Introduction	Safety Information	4
	Identification of Parts	7
	Function Information	8
Before Starting to Wash	Preparation Before Washing	9
	Use of Water, Dispenser Drawer,Detergent,and Softener	10
	Special Guide for Stain Removal	13
	Function of each Button	14
Washing Course	Normal Wash	16
	Wool Wash	16
	Quick wash	16
	Duvet Wash	16
	Extra Clean	16
	School care Wash	18
		18
	Soak Wash	20
Additional Function Program	Tub Clean	21
	Air Dry	22
	Option Washing	23
	Delay Start (Reservation) Wash	24
	Other Useful Functions	25
Installation	Placing and Leveling	26
	Connecting Water Supply Hose	27
	Connecting drain Hose	30
Care and Maintenance	Grounding Method	31
	Cleaning and Maintenance	32
Troubleshooting	Soft Safety Door	34
	Common washing problems	35
	Troubleshooting	36
	Smart Diagnosis	37
	Blanket Folding Method	38
Term of warranty	Term of Warranty	39
Specification	Specification	40

4 Safety Information

Read carefully and thoroughly through this booklet as it contains important safety information that will protect the user from unexpected dangers and prevent potential damages to the product.

<![if ! IE]>

<![endif]>Introduction

This booklet is divided into 2 parts : Warning and Caution.

:This is a warning sign specifying user’s applications which might be dangerous.

: This is a sign specifying ‘Strictly Forbidden’ applications.

WARNING : Failure to comply with the instructions under this sign may result in major physical injuries or death.

CAUTION : Failure to comply with the instructions under this sign may result in minor physical injuries or damages to the product.

	WATER	WARNING
	HEATER
	SAFETY
		••Under certain conditions hydrogen gas may be produced in a water heater that
		has not been used for two weeks or more. Hydrogen gas can be explosive under
		these circumstances. If the HOT water has not been used for two weeks or more,
		prevent the possibility of damage or injury by turning on all Hot water faucets
		and allowing them to run for several minutes. Do this before using any electrical
		appliance which is connected to the HOT water system. This simple procedure
		will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not
		smoke or use an open flame or appliance during this process.
	PROPER	CAUTION
	INSTALLATION
		••The base opening must not be obstructed by carpeting when the washing machine
		is installed on a carpeted floor.
		••Install or store where it will not be exposed to temperatures below freezing or
		exposed to the weather.
		If the product is exposed to such conditions, electric shock, fire, break
		down or deformation may occur
		••Properly ground washer to conform with all governing codes and ordinances.
		Follow details in Installation Instructions
		If not grounded properly, break down and leakage of electricity may occur,
		which may cause electric shock
		••Must be positioned so that the plug is accessible.
		If the plug is placed between the wall and the machine, it may get damaged,
		possibly causing fire or electric shock.
		••Make sure the plug is completely pushed into the outlet.
		Failure to do so may cause electric shock and fire due to overheating.

Safety Information

YOUR		WARNING
LAUNDRY
AREA
		••Keep the area underneath and around your appliances free of combustible
		materials such as lint, paper, rags, chemical, etc.
		Operating with such materials around the machine may trigger explosion or
		fire.
		••Close supervision is necessary if this appliance is used by or near children. Do
		not allow children to play on, with, or inside this or any other appliance.
		There is potential danger that children might drown in the tub.

Do not touch the power plug with a wet hand.

It will cause electric shock

Do not put your hand, foot or anything under the washing machine while the washing machine is in operation.

There is a rotating mechanism under the machine, so you could be injured.

	WHEN USING	CAUTION
	THE WASHER

••Use this appliance only for its intended purpose as described in this Owner’s Manual.

••The laundry process can reduce the flame retardancy of fabrics.To avoid such a result, carefully follow the garment manufacturer’s wash and care instructions.

••To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by

removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning

NOTE	: Pressing Power button to turn off does NOT
	disconnect the appliance from the power supply.

••Make sure that drainage is working properly

If water is not drained properly, your floor may get flooded. Flooded floors may induce electricity leakage, further resulting in electric shock or fire.

••If, during spinning, opening the lid does not stop the tub within about 15 seconds, immediately discontinue operating the machine.

Call for repair. A machine that spins with its door open may cause injuries.

Never reach into washer while it is moving.

Wait until the machine has completely stopped before opening the lid.

Even slow rotation can cause injury.

Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

Operating with a damaged plug may cause electric shock.

Do not use water hotter than 50°C.

Use of excessively hot water may cause damage to fabrics or cause leakage of water.

5

<![if ! IE]>

<![endif]>Introduction

6
		S	afety Information

<![if ! IE]>

<![endif]>Introduction

	WHEN USING	WARNING
	THE WASHING

Do not use a plug socket and wiring equipment for more than their rated capacity.

Exceeding the limit may lead to electric shock, fire , break down, and/ or deformation of parts.

Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover.

Mixing different chemicals can produce toxic gases which may cause death.

Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, dry-cleaning solvents, kerosene, etc). Do not add these substances to the wash water.

Do not use or place these substances around your washer or dryer during operation.

It may ignite or explode.

	WHEN NOT	CAUTION
	IN USE

••Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; they may need replacement after 5 years.

••When the air temperature is high and the water temperature is low, condensation may occur and thus wet the floor.

••Wipe off dirt or dust on the contacts of the power plug.

Using unclean power plug may cause fire.

••Before discarding a washer, or removing it from service, remove the washer lid to prevent children from hiding inside.

Children may be trapped and suffocated if the lid is left intact.

Do not attempt to repair or replace any part of this appliance unless specifically recommended in this Owner’s Manual, or in published user-repair instructions that you understand and have the skills to carry out.

Operating the machine with improperly replaced parts may be a cause for fire or electric shock.

Do not tamper with controls.

It may lead to electric shock, fire , break down, deformation.

Do not yank the power cord in an attempt to disconnect the power plug. Securely hold the power plug to unplug the machine.

Failure to observe these instructions may cause electric shock or fire due to short-circuit.

When you are cleaning the washing machine, do not apply water directly to any part of the washing machine.

It will cause short circuit and electric shock.

Identification Part

Body

* Picture might be different by model.

SOFT SAFETY DOOR

TEMPERED GLASS POWDER AND LIQUID

DETERGENT BOX

SOFTENER INLET BLEACH DISPENSER

FUNCTION SELECTOR

TUB

START/PAUSE BUTTON

Use to start or stop the washing machine temporarily

ADJUSTABLE LEGS

Use to level the washing machine for correct balance & spin operation

Accessories

*WATER SUPPLY HOSE

Make sure the water does not leak.

*POWER PLUG

Ifthesupplycordisdamage,

it must be replaced by the manufacture or its service agents or similar qualified

person in order to avoid

a hazard.

*Jet Spray Cap

LINT FILTER

Clean regularly to stop linting on the clothes load.

*DRAIN HOSE

for pump model

Check if the drain hose is hung up before operating the washing machine.

*DOOR SWITCH

*DRAIN HOSE

for non pump model

BASE

Water supply hoses

Drain hose

Anti-rat cover (option)

For None-Pump model

or

For Pump model

1 Each for Cold and Hot water

NOTE

7

<![if ! IE]>

<![endif]>Introduction

“*” Part can be different according to the model.

8

<![if ! IE]>

<![endif]>Introduction

Function Information

Our machine provides various washing methods which suits various conditions and types of laundry.

Different types of laundry washing

Normal Wash

Use this Program for everyday washing e.g. sheets, towels, T-shirts. (refer to page 16)

Duvet Wash

Use for blanket or Duvet with (Hand Wash) sign. (refer to page 16)

Extra Clean

Use this Course to get better rising performance. (refer to page 16)

Wool Wash

Wool clothes (lingerie, wool, etc.) Which may be easily damaged can be washed. (refer to page 16)

The fibers of machine washable woolens have been specifically modified to prevent felting when they are machine washed.

Most hand knitted garments are not made of machine washable wool and we recommend that you hand wash them

••Before washing your woolens check the care label for the washing instructions.

••When washing woolens use a mild Detergent recommended for washing wool.

••Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.

••To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight. (The heat and tumble action of a dryer may cause shrinkage or felting of woolen garments.)

Some wool underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.

(Ensure that the whole article is suitable for machine washing and not just the backing material.) You may wish to hand wash these articles and place them in the machine to spin dry.

Pre Wash+

Normal

Washing laundry with cycle that pretreats immediate stain without hand-wash. i.e. Necessary for clothes which could be smelled badly without prompt laundry. (refer to page 18)

School care Wash

Use this Course to wash School Uniform (refer to page 18)

Washing according to the condition of laundry

Quick Wash

Quick Wash can be selected to wash lightly soiled clothes of less than 2.0 kg in a short time.(refer to page 16)

Soak Wash

Soak Wash can be selected to wash heavily soiled laundry by soaking in water for some time to remove dirt and grime. (refer to page 20)

Other washing method

Tub Clean

Use this program to clean the inside of washing machine especiallyInner tub & Outer tub (refer to page 21)

Delay Start Wash

Delay Start Wash is used to delay the finishing time of the operation.

The number of hours to be delayed can be set by the user accordingly. (refer to page 24)

Option Wash

When the user needs only Spin, Rinse/Spin, Rinse, Wash/Rinse, Wash, Wash/Rinse/Spin, Soak/Wash/ Rinse/Spin. (refer to page 23)

WARNING

Fire Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on it (including cooking oils).

Doing so can result in death, explosion, or fire.

Preparation Before Washing

Care Labels

* Look for a care label on your clothes.This will tell you about the fabric content of your garment and how it should be washed.

Sort clothes into loads that can be washed with the same wash cycle, Water Temperature and spin speed.

Sorting
To get the best results, different fabrics need to be washed in different ways.
••SOIL (Heavy, Normal, Light)	Separate clothes according to the type and amount of soil.
••COLOR (Whites, Lights, Darks)	Separate white fabrics from colored fabrics.
••LINT (Lint producers, Collectors)	Separate lint producers and lint collectors.
Lint Producers	Terry cloth, Chenille, Towels, Nappies, Diapers
Lint Collectors	Synthetics, Corduroy, Permanent Press, Socks.

Check before Loading

••Check all pockets to make sure that they are empty. Things such as nails, hair clips, matches, pens,
coins, and keys can damage both your washer and your clothes.
••Mend any torn garments or loose buttons.Tears or holes may become larger during washing.
••Remove belts, under wires, etc. to prevent damage to the machine or your clothes.
••Pretreat any dirt and stains.
••Make sure the clothes are washable in water.
••Check the washing instructions.	WIRE
••Remove tissue in pockets.

Caution

Do not wash or spin any item labeled or known to be water-proof or water-resistant, even if the product care label on the item permits machine washing. Failure to follow these instructions could result in severe damage to your laundry, your washer and/or property damage as a result of abnormal vibration of the washer.

--Examples of water-proof or water-resistant items include certain mattress pads, mattress covers, rain gear, camping gear, skiing apparel , outdoor gear and similar items.

Pretreatment on stains or heavy soil

••Use ‘PreWash+Normal’ cycle for very soiled clothes. In case of heavily soiled clothes, pretreatment may require before the cycle.

••Pretreat shirt collars and cuffs with a pre-wash product or liquid Detergent when placing them in the washer. Before washing treat special stains with bar soaps, liquid Detergent or a paste of water and granular Detergent.

••Use a pretreat soil and stain remover. Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove. (For more detail refer to page 13)

Loading

Do not wash fabrics containing flammable materials (waxes, cleaning fluids, etc.).

Load Size

The Water Level should just cover the clothes. Adjust the load size accordingly. Loosely load clothes no higher than the top row of holes in the washer tub. To add items after washer has started, press Start button and submerge additional items. Close the lid and press Start button again to restart.

Light and Large-sized clothing

Clothes like downs and woollens are light weight, large and float easily. Use a nylon net and wash them in a small amount of water. If the laundry floats

during the wash cycle, it may become damaged. Use dissolved Detergent to prevent the Detergent from clumping.

Long laundry items

Use nylon nets for long, DELICATE items. For laundry with long strings or long length , a net will prevent tangling during washing. Fasten zippers, hook, and strings to make sure that these items

don’t snag on other clothes.

Nylon net is not supplied by LG.

9

<![if ! IE]>

<![endif]>Wash to Starting Before

10

<![if ! IE]>

<![endif]>Before Starting to Wash

Use of Water, Dispenser Drawer , Detergent , and Softener

Using Water

Amount of Water Level

••This machine detects quantity of laundry automatically, then sets the water level and proper amount of detergent.

••When you select a wash Course, the water level and amount of detergent (to be used) will be shown on the panel.

••The following table shows the amount of water.

••When the water level is automatically detected, it may differ depending on the quantity of laundry even though the same water level is indicated on the control panel.

NOTE

[Minimum water amount]

It depends on laundry load and washer model. Or manually you can pour a certain amount water into tub directly to some height. That’s because if water level reaches to the some height sensed by washer itself, washer automatically operates. In other words, it is needed to pour water to the point when washer starts operating.

WaterTemperature (WARM,COLD : Option for Only 2 Vale)

••The machine sets the appropriate temperature automatically according to the wash course.

••You can change the water temperature by pressing the Water Temp. Button. (refer to page 14)

••The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning results. We recommend temperatures of:

-HOT49~60°C…(120-140˚F) Whiteitems,diapers,underclothingandheavilysoiled,colorfastitems. - WARM 29~40°C…(85-105˚F)Most items

-COLD*18~40°C…(65-75˚F) Onlyverybrightcolorswithlightsoil.

••When washing in Cold water additional steps may be needed:

- Adjust Detergent amount and pre-dissolve Detergent in Warm water - Pretreat spots and stains

- Soak heavily soiled items - Use appropriate bleach

* Temperature below 18 °C … (65 ˚F) will not activate laundry additives and may cause lint, residue, poor cleaning, etc. In addition, Detergent manufactures and care labels define Cold water as 26~29 °

C…(80-85˚F).Ifthetemperatureofthewaterinthetubistoocoldforyourhands,theDetergentwill not activate and clean effectively.

Attention

If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown or orange spots or streaks. Iron is not always visible. Installation of water softener or an iron

filter may be necessary for severe cases.

Using detergent Detergent

Follow the detergent package directions. Using too little detergent is a common cause of laundry problems. Use more detergent if you have hard water, large loads, greasy or oily soils or lower water temperature.

Choosing the right Detergent

We recommend the use of domestic detergent, (powder, liquid or concentrated). Soap flakes or granulated soap powders should not be used in your washing machine. When washing woolens remember to use

detergent suitable for washing woolens.

where you deposit the detergent

Powder Detergent Box

Using detergent

How much Detergent

When you select a wash Course the water level and the amount of detergent (to be used) will be shown on the control panel. The amount of a cup in the diagram is about 40 g for concentrated detergent. The correct amount of Detergent will vary depending on the amount of soil in your clothes (Jeans and work cloches may need more Detergent, while bath towels usually need less.).

For liquid and concentrated Detergents, follow the recommendations of the Detergent manufacturer.

Note: To check you are using the correct amount of detergent, lift the lid of your machine about half-way through the wash. There should be a thin layer of foam over the surface of the water. Lots of foam may look good, but it does not contribute to cleaning your clothes. No foam means not enough detergent had been used; soil and lint can settle back on the clothes or the washing machine. If excess detergent is used, the rinse will not be as clean and efficient. Also, it could cause environmental pollution, so use it accordingly.

Adding the Detergent

Open the detergent dispenser and deposit the appropriate amount

of detergent where you deposit the detergent Powder Detergent dispenser.

Some detergents MUST be fully dissolved before adding to your

machine to get the best wash results. Check the instructions on the detergent packet.If you use powdered

detergent if is essential that the required amount be fully dissolved in very hot water before being added to warm or hot water for the actual wash.

Pre-dissolving detergent in warm water when washing in cold water can improve its performance.

Using Liquid Bleach
••Check clothing care label for special instructions and separate the laundry	Bleach dispenser
to be bleached
••Dilute liquid chlorine bleach.
••Measure the recommended amount of liquid bleach carefully following

instructions on the bottle.

••Before starting the washer, pour measured amount of bleach directly into bleach dispenser. Avoid splashing or overfilling. Powdered bleach should be mixed with water before pouring.

Attention

■■Never pour undiluted liquid bleach directly onto clothes or into the wash basket.

This may cause change of color or damage the laundry.

■■Do not pour powdered bleach into bleach dispenser.

11

<![if ! IE]>

<![endif]>Wash to Starting Before

Softener dispenser ( )

or

12

<![if ! IE]>

<![endif]>Before Starting to Wash

Use of Water, Dispenser Drawer, Detergent, and Softener

Use Fabric Softener

••Dilute fabric softener with water.

Undiluted fabric softener may result in spots that look like oil stain

••Measure and add the recommended amount of fabric softener into the compartment marked with this symbol( ). Follow manufacturer's direction

))Fabric softener is automatically dispensed in the final rinse with indication beep.

))If you want extra rinse , you must add fabric softener manually when indication beep rings in the final rinse. This maximize the fabric softener function.

••Do not overfill. The dispenser hold max 35 mL. Never add more than 35 mL.

Overfilling can cause early dispensing of the fabric softener which could result in stained clothes. A cup with a pouring spout will help you avoid spilling

••The effect of adding fabric softener may vary according to its viscosity, The sticker fabric softener makes its effect the lower. For a sticky softener it is recommended that it be diluted with water, then be manually put during the time when the washer beeps several times before the final rinse. This function informing correct time dispense manually is optionally applied to some models. Please keep it in mind that fabric softener has to be diluted with water before dispensed and never poured directly on clothes.

Attention

■■Do not mix with Detergent or bleach.

■■Never pour fabric softener directly on clothes. It may stain them. ■■Do not stop the washer during the first spin for timely dispensing.

■■Option washing is not designed to be used with fabric softener dispenser.

Scrud (Waxy Build up)

Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener comes into contact with Detergent. This build-up is not brought about by a fault in the machine.

If scrud is allowed to build-up in the machine it can result in stains on your clothes or an unpleasant smell in your washer.

If you wish to use fabric softener we recommend

•• Using fabric softener sparingly.

••When filling the dispenser, do not splash or overfill.

••Clean dispenser as soon as the cycle is finished.

••Clean your machine regularly. (refer to page 21 or 32)

••Cold water washing increases the chance of this build-up occurring. We recommend a regular Warm or Hot wash e.g. every 5th wash should be at least a warm one.

••Fabric softener of thinner consistency is less likely to leave residue on the dispenser and contribute to a build-up.

Follow fabric care label instructions

Special Guide for Stain Removal

WARNING

■■Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or products containing ammonia.These mixtures can produce dangerous fumes which can cause serious injury or death.

■■To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:

••Read and comply with all instructions on stain removal products.

••Keep stain removal products in their original labeled containers and out of children’s reach

••Thoroughly wash any utensil used.

••Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.

••Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents or other flammable or explosive substances because they give off vapors that could ignite or explode.

••Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.

For successful stain removal :

••Remove stains promptly.

••Use ‘Pre Wash+Normal’ cycle for very soiled clothes. In case of heavily soiled clothes, pretreatment may require before the cycle.

••Determine the kind of stain, then follow the recommended treatment in the stain removal chart below.

••To pretreat stains, use a prewash product, liquid Detergent, or a paste made from granular Detergent and water.

••Use COLD water on unknown stains because HOT water can set stains.

••Check care label instructions for treatments to avoid on specific fabrics.

••Check for colorfastness by testing stain remover on an inside seam.

••Rinse and wash items after stain removal.

		Stain Removal
	STAIN	TREATMENT
	Adhesive tape, chewing gum, rubber	Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover
	cement	or nonflammable dry cleaning fluid.
	Baby formula, dairy products, egg	Use product containing enzymes to pretreat or soak stains.
	Beverages (coffee, tea, soda, juice,	Pretreat stain. Wash using COLD water and bleach safe for fabric.
	alcoholic beverages)
	Blood	Rinse with COLD water. Rub with bar soap. Or pretreat or soak with product containing enzymes. Wash
		using bleach safe for fabric.
	Candle wax, crayon	Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is
		absorbed. Replace paper towels frequently.Treat remaining stain with prewash stain remover or nonflammable
		dry cleaning fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
	Chocolate	Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
	Collar or cuff soil, cosmetics	Pretreat with prewash stain remover or rub with bar soap.
	Dye transfer on white fabric	Use packaged color remover. Wash using bleach safe for fabric.
	Grass	Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
	Grease,oil,tar(butter,fats,saladdressing,	Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
		nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly.
	cooking oils, car grease, motor oils)
		Wash using hottest water safe for fabric.
	Ink	Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured
		alcohol or nonflammable dry cleaning fluid.
	Mildew, scorch	Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and HOT water before washing. Badly
		mildewed fabrics may be permanently damaged.
	Mud	Brush off dry mud. Pretreat or soak with product containing enzymes.
	Mustard, tomato	Pretreat with prewash stain remover. Wash using bleach safe for fabric.
	Nail polish	May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of
		stain. Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
	Paint, varnish	WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
		OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
	Rust, brown or yellow discoloration	For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate Detergent and
		Do not use chlorine bleach because it may intensify discoloration.
	Shoe polish	LIQUID : Pretreat with a paste of granular Detergent and water. PASTE : Scrape residue from fabric. Pretreat
		with prewash stain remover or nonflammable dry cleaning fluid. Rub Detergent into dampened area, Wash
		using bleach safe for fabric.

13

<![if ! IE]>

<![endif]>Wash to Starting Before

14

<![if ! IE]>

<![endif]>Before Starting to Wash

Function of each Button

Beeper Button(Only 1 Valve)

••If you want to use the washing machine without alarm signal sounds, press Beeper buttons allow you to select : High off Low High respectively. Default setting is High. (refer to page 25)

Water Level Button

••Use to select the proper amount of water in relation to the weight and type of laundry.

••Automatically controlled, but can be selected manually by pressing the Water Level Button.

••Water is automatically selected for Normal Course.

The following settings are indicated as the button is pushed 7 8 9 10 1 2 3 4 5 6 7

Air Dry

••This button is used for airdrying of your laundry.

••Air dry selections light up in sequence as follows

30 60 90 120

••If you want to use Air Dry, Press & hold 3 sec. Spin key.

NOTE

Child Lock Function

••Use to lock or unlock the control buttons to prevent settings from being changed by a child.To lock, push the Rinse buttons and to unlock push them one more time during the washing process.

(refer to page 25)

Wash. Rinse. Spin Button

••Use when wash, rinse, spin time need to be adjusted.

••The time increases when the button is pressed.

••If adjustments are needed during the wash, press the [start/ pause] button before making any changes.

••When the button is pressed during washing, the remaining time is displayed.

*Even if the water level or the water temperature are changed by the user in Normal Course, the sensor will still work. The sensor algorithm may differ according to models.

*The control panel may differ according to different models.