LG WFSL1632EK Owner's Manual

OWNER’S MANUAL

WASHING MACHINE

Please read this manual carefully before operating
your washing machine and retain it for future reference.

WFSL1632EK

P/No.: MFL67221309

roduct Features

P

Washer doesn't operate while the lid is open. If the lid is open during the wash, rinse or spin
cycles, the operation stops for safety.

FUZZY logic control

A built-in load sensor automatically detects the laundry load and a
microprocessor optimizes washing conditions such as ideal WATER
LEVEL and washing time.

START

Advanced technology is built into the Electronic Control System which
ensures the best washing result.

SENSING

Laundry Sensor

Water Level Sensor

SETTING

Optimum
Washing
Condition

WASHING

AUTO

POWER

OFF

Turbo drum washing

When "Punch + 3" washing wings turn, the washing
tub turns in the opposite direction. This makes the
both sides current of water which improve wash­performance by rubbing clothes strongly.

3 Step washing

3 step washing makes the best washing performance with low tangling.

Rubbing Rubbing and

Shaking

Shaking and

Disentangling

: Be sure to remove the unit from the carton base, otherwise the

NOTE

machine will not be able to operate properly.

ontents

C

READ THIS MANUAL

Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you
may not need to call for service at all.

Introduction Safety Information 4

Identification of Parts 7
Function Information 8

Before Starting to Wash

Washing Programs FUZZY Wash (Normal Wash) 16

Additional Function
Program

Installation Placing and Leveling 26

Care and Maintenance Grounding Method 31

Troubleshooting Common washing problems 35

Specification Specification 37

Preparation Before Washing 9
Use of Water, Dispenser Drawer, Detergent, Bleach and Softener
Special Guide for Stain Removal 13
Function of each Button 14

WOOL Wash 16
QUICK WASH 16
JEANS Wash 16
EXTRA CLEANING 16
SOAK Wash 18
FAVORITE Wash 19
SILENT Wash 20

TUB CLEAN 21
AIR DRY 22
Option Washing 23
DELAY START (RESERVATION) Wash 24
Other Useful Functions 25

Connecting Water Supply Hose 27
Connecting Drain Hose 30

Cleaning and Maintenance 32
Use of Handle Locker 34

Troubleshooting 36

10

4

S

This booklet is divided into 2 parts : Warning and Caution.

Introduction

afety Information

Read carefully and thoroughly through this booklet as it contains important safety information
that will protect the user from unexpected dangers and prevent potential damages to the product.

: This is a warning sign specifying user’s applications which might

be dangerous.

: This is a sign specifying ‘Strictly Forbidden’ applications.

Warning

Caution

WATER
HEATER
SAFETY

PROPER
INSTALLATION

: Failure to comply with the instructions under this

sign may result in major physical injuries or death.

: Failure to comply with the instructions under this

sign may result in minor physical injuries or
damages to the product.

Warning

• Under certain conditions hydrogen gas may be produced in a water heater that has not
been used for two weeks or more. Hydrogen gas can be explosive under these
circumstances. If the HOT water has not been used for two weeks or more, prevent the
possibility of damage or injury by turning on all Hot water faucets and allowing them to
run for several minutes. Do this before using any electrical appliance which is connected
to the HOT water system. This simple procedure will allow any built-up hydrogen gas to
escape. Since the gas is flammable, do not smoke or use an open flame or appliance
during this process.

Caution

• The base opening must not be obstructed by carpeting when the washing machine is installed
on a carpeted floor.

• Install or store where it will not be exposed to temperatures below freezing or exposed to the
weather.

If the product is exposed to such conditions, electric shock, fire, break down or
deformation may occur.

• Properly ground washer to conform with all governing codes and ordinances. Follow details
in Installation Instructions.

If not grounded properly, break down and leakage of electricity may occur, which may
cause electric shock.

• Must be positioned so that the plug is accessible.

If the plug is placed between the wall and the machine, it may get damaged, possibly
causing fire or electric shock.

• Make sure the plug is completely pushed into the outlet.

Failure to do so may cause electric shock and fire due to overheating.

afety Information

S

5

Introduction

YOUR
LAUNDRY
AREA

WHEN USING
THE WASHER

Warning

• Keep the area underneath and around your appliances free of combustible
materials such as lint, paper, rags, chemical, etc.

Operating with such materials around the machine may trigger
explosion or fire.

• Close supervision is necessary if this appliance is used by or near children.
Do not allow children to play on, with, or inside this or any other appliance.

There is potential danger that children might drown in the tub.

Do not touch the power plug with a wet hand.

It will cause electric shock

Do not put your hand, foot or anything under the washing machine while
the washing machine is in operation.

There is a rotating mechanism under the machine, so you could be injured.

Caution

• Use this appliance only for its intended purpose as described in this Owner’s Manual.

• The laundry process can reduce the flame retardancy of fabrics. To avoid such a result,
carefully follow the garment manufacturer’s wash and care instructions.

• To minimize the possibility of electric shock, unplug this appliance from the power
supply or disconnect the washer at the household distribution panel by removing the
fuse or switching off the cirduit breaker before attempting any maintenance or cleaning.

NOTE

• Make sure that drainage is working properly.

If water is not drained properly, your floor may get flooded. Flooded floors
may induce electricity leakage, further resulting in electric shock or fire.

• If, during spinning, opening the lid does not stop the tub within about 15 seconds,
immediately discontinue operating the machine.

Call for repair. A machine that spins with its door open may cause injuries.

: Pressing Power button to turn off does NOT

disconnect the appliance from the power supply.

Never reach into washer while it is moving.
Wait until the machine has completely stopped before opening the lid.

Even slow rotation can cause injury.

Never attempt to operate this appliance if it is damaged, malfunctioning, partially
disassembled, or has missing or broken parts, including a damaged cord or plug.

Operating with a damaged plug may cause electric shock.

Do not use water hotter than 50°C.

Use of excessively hot water may cause damage to fabrics or cause
leakage of water.

6

afety Information

S

WHEN USING
THE WASHER

Introduction

WHEN NOT
IN USE

Warning

Do not use a plug socket and wiring equipment for more than their rated capacity.

Exceeding the limit may lead to electric shock, fire , break down, and/or
deformation of parts.

Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover.

Mixing different chemicals can produce toxic gases which may cause death.

Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted
with combustible or explosive substances (such as wax, oil, paint, gasoline, dry­cleaning solvents, kerosene, etc). Do not add these substances to the wash water.
Do not use or place these substances around your washer or dryer during operation.

It may ignite or explode.

Caution

• Turn off water faucets to relieve pressure on hoses and valves and to minimize
leakageif a break or rupture should occur. Check the condition of the fill hoses;
they may need replacement after 5years.

• When the air temperature is high and the water temperature is low, condensation
may occur and thus wet the floor.

• Wipe off dirt or dust on the contacts of the power plug.

Using unclean power plug may cause fire.

• Before discarding a washer, or removing it from service, remove the washer lid to
prevent children from hiding inside.

Children may be trapped and suffocated if the lid is left intact.

Do not attempt to repair or replace any part of this appliance unless specifically
recommended in this Owner’s Manual, or in published user-repair instructions that
you understand and have the skills to carry out.

Operating the machine with improperly replaced parts may be a
cause for fire or electric shock.

Do not tamper with controls.

It may lead to electric shock, fire , break down, deformation.

Do not yank the power cord in an attempt to disconnect the power plug.
Securely hold the power plug to unplug the machine.

Failure to observe these instructions may cause electric shock or fire
due to short-circuit .

When you are cleaning the washing machine, do not apply water directly to any
part of the washing machine.

It will cause short circuit and electric shock.

dentification of Parts

I

Body

7

Introduction

POWDER AND LIQUID
DETERGENT BOX ( )

LINT FILTER

Clean regularly to
stop linting on the
clothes load.

BLEACH
DISPENSER ( )

FUNCTION
SELECTOR

TUB

START/PAUSE
BUTTON

Use to start or
stop the washing
machine
temporarily.

ADJUSTABLE LEGS

Use to level the washing
machine for correct
balance & spin
operation.

Accessories

* WATER SUPPLY

HOSE

Make sure the
water does not
leak.

* POWER PLUG

If the supply cord is
damaged, it must be
replaced by the
manufacturer or its
service agents or
similarly qualified
person in order to
avoid a hazard.

* DRAIN HOSE for

pump model

Check if the drain
hose is hung up
before operating the
washing machine.

* DRAIN HOSE

for non pump
model

BASE

Water supply hoses

or

1 Each for COLD and

HOT water

NOTE

“*” Part can be different according to the model.

Drain hose

Anti-rat cover (option)

or

8

unction Information

F

Our machine provides various washing methods which suits various conditions and
types of laundry.

Different types of laundry washing

FUZZY(Normal) Wash

Introduction

Use this Program for everyday washing e.g. sheets, towels, T-shirts. (refer to page 16)

JEANS Wash

Use this Program for heavily soiled durable garments e.g. overalls, jeans.
Thick and heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed. (refer to page 16)

EXTRA CLEANING

Use this program to get better rising performance. (refer to page 16)

WOOL Wash

Wool clothes (lingerie, wool, etc.) which may be easily damaged can be washed. (refer to page 16)
The fibers of machine washable woolens have been specifically modified to prevent felting when they are machine washed.
Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them

• Before washing your woolens check the care label for the washing instructions.

• When washing woolens use a mild Detergent recommended for washing wool.

• Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.

• To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight.
(The heat and tumble action of a dryer may cause shrinkage or felting of woolen garments.)
Some wool underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.
(Ensure that the whole article is suitable for machine washing and not just the backing material.)
You may wish to handwash these articles and place them in the machine to spin dry.

FAVORITE Wash

This setting allows you to store your FAVORITE wash conditions in the normal cycle memory. (refer to page 19)

SILENT Wash

Use this program to wash quietly at night. (refer to page 20)

Washing according to the condition of laundry

QUICK WASH

QUICK WASH can be selected to wash lightly soiled clothes of less than 2.0 kg in a short time. (refer to page 16)

SOAK Wash

SOAK Wash can be selected to wash heavily soiled laundry by soaking in water for some time to
remove dirt and grime. (refer to page 18)

Other washing method

TUB CLEAN

Use this program to clean the inside of washing machine especially Inner tub & Outer tub . (refer to page 21)

DELAY START Wash

DELAY START Wash is used to delay the finishing time of the operation.
The number of hours to be delayed can be set by the user accordingly. (refer to page 24)

OPTION WASH

When the user needs only SPIN, RINSE/SPIN, RINSE, WASH/RINSE, WASH, WASH/RINSE/SPIN,
SOAK/WASH/RINSE/SPIN. (refer to page 23)

9

reparation Before Washing

P

Care Labels

* Look for a care label on your clothes. This will tell you about the fabric content of your garment

and how it should be washed.
Sort clothes into loads that can be washed with the same wash cycle, Water Temperature and spin speed.

Sorting

To get the best results, different fabrics need to be washed in different ways.

• SOIL (Heavy, Normal, Light)

• COLOR (Whites, Lights, Darks) Separate white fabrics from colored fabrics.

• LINT (Lint producers, Collectors) Separate lint producers and lint collectors.

Lint Producers Terry cloth, Chenille, Towels, Nappies, Diapers
Lint Collectors Synthetics, Corduroy, Permanent Press, Socks

Check before Loading

• Check all pockets to make sure that they are empty. Things such as nails, hairclips, matches,
pens, coins, and keys can damage both your washer and your clothes.

• Mend any torn garments or loose buttons. Tears or holes may become larger during washing.

• Remove belts, underwires, etc. to prevent damage to the machine or your clothes.

• Pretreat any dirt and stains.

• Make sure the clothes are washable in water.

• Check the washing instructions.

• Remove tissue in pockets.

Pretreatment on stains or heavy soil

• Pretreat shirt collars and cuffs with a pre-wash product or liquid Detergent when placing them in the washer.
Before washing treat special stains with bar soaps, liquid Detergent or a paste of water and granular Detergent.

• Use a pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.

(For more detail refer to page13)

Loading

Do not wash fabrics containing flammable materials (waxes, cleaning fluids, etc.).

Load Size

The WATER LEVEL should just cover the clothes. Adjust the load size
accordingly. Loosely load clothes no higher than the top row of holes in the
washer tub. To add items after washer has started, press Start button and
submerge additional items. Close the lid and press Start button again to restart.

Light and Large-sized clothing

Clothes like downs and woollens are light weight, large and float easily. Use a nylon net and
wash them in a small amount of water. If the laundry floats during the wash cycle, it may
become damaged. Use dissolved Detergent to prevent the Detergent from clumping.

Long laundry items

Use nylon nets for long, DELICATE items. For laundry with long strings or long length , a net will prevent
tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.

Nylon net is not supplied by LG.

Separate clothes according to the type and amount of soil.

WARNING

Fire Hazard

Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type
of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.

Before Starting to Wash

10

se of Water, Dispenser Drawer, Detergent, Bleach and Softener

U

Using Water

Amount of WATER LEVEL

• This machine detects the quantity of laundry automatically, then sets
the WATER LEVEL and proper amount of Detergent.

• When you select a wash program, the WATER LEVEL and amount of
Detergent (to be used) will be shown on the control panel.

Before Starting to Wash

• The following table shows the amount of water.

•

When the WATER LEVEL is automatically detected, it may differ depending
on the quantity of laundry even though the same WATER LEVEL is indicated
on the control panel.

NOTE

[ Minimum water amount ]

It depends on laundry load and washer model. Or manually you can pour a certain amount water into tub
directly to some height. That’s because if water level reaches to the some height sensed by washer itself, washer
automatically operates. In other words, it is needed to pour water to the point when washer starts operating.

Water Temperature

• The machine sets the appropriate temperature automatically according to the wash program .

• You can change the Water Temperature by pressing the WATER TEMP. button. (refer to page 14)

•

The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning results.
We recommend temperatures of:

- HOT 49~60°C…(120-140˚F)

- WARM 29~40°C…(85-105˚F) Most items

- COLD* 18~24°C…(65-75˚F) Only very bright colors with light soil.

• When washing in COLD water additional steps may be needed:

- Adjust Detergent amount and pre-dissolve Detergent in WARM water

- Pretreat spots and stains

- Soak heavily soiled items

- Use appropriate bleach
Temperature below 18°C…(65˚F) will not activate laundry additives and may cause lint, residue, poor cleaning, etc.

*

In addition, Detergent manufactures and care labels define COLD water as 26~29°C…(80-85˚F).
If the temperature of the water in the tub is too cold for your hands, the Detergent will not activate and clean effectively.

NOTE

If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown or orange spots
or streaks. Iron is not always visible. Installation of water softener or an iron filter may be necessary for severe cases.

White items, diapers, underclothing and heavily soiled, colorfast items.

Using the Dispenser Drawer

The dispenser drawer contains 2 compartments:

• Liquid Fabric Softener

• Liquid or Powder Low-Sudsing, High-Efficiency Detergent

The dispenser automatically dispenses additives at the proper time in the wash cycle.

1. Slowly open the dispenser drawer by pulling the drawer out until it stops.

2. After adding laundry products, slowly close the dispenser drawer. Closing the

drawer too quickly could result in early dispensing of additives.

• Avoid overfilling or splashing when adding laundry products to the dispenser.

Doing so could result in early dispensing of laundry products.
At the end of the cycle, you may see water in the compartments. This is part of the
normal operation of the washer.
NOTE : Do not use bleach in the dispenser drawer.

Using Detergent

Detergent

Follow the Detergent package directions. Using too little Detergent is a common cause of laundry problems.
Use more Detergent if you have hard water, large loads, greasy or oily soils or lower Water Temperature.

Choosing the right Detergent

We recommend the use of domestic Detergent, (powder, liquid or concentrated). Soap flakes or granulated
soap powders should not be used in your washing machine. When washing woolens remember to use
Detergent suitable for washing woolens.

Using Detergent

How much Detergent

The correct amount of Detergent will vary depending on the amount of soil in your clothes (Jeans and work
cloches may need more Detergent, while bath towels usually need less.).
For liquid and concentrated Detergents, follow the recommendations of the Detergent manufacturer.

Note: To check you are using the correct amount of Detergent, lift the lid of your machine about half­way through the wash. There should be a thin layer of foam over the surface of the water. Lots of foam
may look good, but it does not contribute to cleaning your clothes. No foam means not enough Detergent
has been used; soil and lint can settle back on the clothes or the washing machine.
If excess Detergent is used, the rinse will not be as clean and efficient. Also, it could cause environmental
pollution, so use it accordingly.

11

Before Starting to Wash

Adding Detergent

Add measured detergent to the detergent compartment of the dispenser drawer.

Detergent is flushed through the dispenser at the beginning of the wash phase.
Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the load.
Avoid using too much detergent in your washer, as it can lead to oversudsing and detergent residue being left on the
clothes.

12

se of Water, Dispenser Drawer, Detergent, Bleach and Softener

U

Using Liquid Bleach

• Check clothing care label for special instructions and separate the
laundry to be bleached

• Dilute liquid chlorine bleach.

• Measure the recommended amount of liquid bleach carefully
following instructions on the bottle.

• Before starting the washer, pour measured amount of bleach directly
into bleach dispenser. Avoid splashing or overfilling. Powdered

Before Starting to Wash

bleach should be mixed with water before pouring.

NOTE

Never pour undiluted liquid bleach directly onto clothes or into the wash basket.
This may cause change of color or damage the laundry.
Do not pour powdered bleach into bleach dispenser.

Using Fabric Softener

If desired, pour the recommended amount of liquid
fabric softener into the right-hand compartment.

Use only liquid fabric softener.

Dilute with water to the maximum fill line.

• Do not exceed the maximum fill line.

Overfilling can cause early dispensing of the fabric
softener, which could stain clothes.

NOTE : Do not pour fabric softener directly on the
wash load. It may stain the clothes.

Bleach dispenser ( )

Attention

Do not mix with Detergent or bleach.
Never pour fabric softener directly on clothes. It may stain them.
Do not stop the washer during the first spin for timely dispensing.
Option washing is not designed to be used with fabric softener dispenser.

Scrud(Waxy Build up)

Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
comes into contact with Detergent. This build-up is not brought about by a fault in the machine.

If scrud is allowed to build-up in the machine it can result in stains on your clothes or an unpleasant
smell in your washer.

If you wish to use fabric softener we recommend

• Using fabric softener sparingly.

• When filling the dispenser, do not splash or overfill.

• Clean dispenser as soon as the cycle is finished.

• Clean your machine regularly. (refer to page 21 or 32)

• Cold water washing increases the chance of this build-up occurring. We recommend a regular WARM or
HOT wash e.g. every 5th wash should be at least a warm one.

• Fabric softener of thinner consistency is less likely to leave residue on the dispenser and contribute to a
build-up.

13

pecial Guide for Stain Removal

S

WARNING

Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:

• Read and comply with all instructions on stain removal products.

• Keep stain removal products in their original labeled containers and out of children’s reach.

• Thoroughly wash any utensil used.

• Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.

• Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents or
other flammable or explosive substances because they give off vapors that could ignite or explode.

• Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.

For successful stain removal:

• Remove stains promptly.

• Determine the kind of stain, then follow the recommended treatment in the stain
removal chart below.

• To pretreat stains, use a prewash product, liquid Detergent, or a paste made from
granular Detergent and water.

• Use COLD water on unknown stains because HOT water can set stains.

• Check care label instructions for treatments to avoid on specific fabrics.

• Check for colorfastness by testing stain remover on an inside seam.

• Rinse and wash items after stain removal.

Stain Removal

STAIN TREATMENT

Adhesive tape, chewing gum,
rubber cement

Baby formula, dairy products, egg
Beverages (coffee, tea, soda,

juice, alcoholic beverages)

Blood

Candle wax, crayon

Chocolate
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Grass
Grease, oil, tar (butter, fats,

salad dressing, cooking oils,
car grease, motor oils)

Ink

Mildew, scorch

Mud

Mustard, tomato

Nail polish

Paint, varnish

Rust, brown or yellow
discoloration

Shoe polish

Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or
nonflammable dry cleaning fluid.

Use product containing enzymes to pretreat or soak stains.

Pretreat stain. Wash using COLD water and bleach safe for fabric.

Rinse with COLD water. Rub with bar soap. Or pretreat or soak with product containing enzymes. Wash using
bleach safe for fabric.

Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is
absorbed. Replace paper towels frequently. Treat remaining stain with prewash stain remover or
nonflammable dry cleaning fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.

Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.

Pretreat with prewash stain remover or rub with bar soap.

Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.

Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly.
Wash using hottest water safe for fabric.

Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured
alcohol or nonflammable dry cleaning fluid.

Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and HOT water before washing. Badly
mildewed fabrics may be permanently damaged.

Brush off dry mud. Pretreat or soak with product containing enzymes.

Pretreat with prewash stain remover. Wash using bleach safe for fabric.

May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of
stain. Repeat, replacing paper towels frequently. Do not use on acetate fabrics.

WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.

For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate Detergent and
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.

LIQUID : Pretreat with a paste of granular Detergent and water. PASTE : Scrape residue from fabric. Pretreat
with prewash stain remover or nonflammable dry cleaning fluid. Rub Detergent into dampened area, Wash
using bleach safe for fabric.

Follow fabric care label

instructions

Before Starting to Wash

14

TUB DRY

unction of each Button

F

WATER TEMPERATURE

BUTTON (OPTION)

• Use to select Water Temperature.
Pressing the button allows you to
select COLD
(HOT&COLD) HOT
COLD respectively.

WARM

Before Starting to Wash

AIR DRY

• This button is used for air-drying of your
laundry.

• Air dry selections light up in sequence as
follows.
TUB DRY
DRY as the button is pushed.

60 90 120 TUB

WATER LEVEL BUTTON

• Use to select the proper amount of water in relation to the
weight and type of laundry.

• Automatically controlled, but can be selected manually by
pressing the WATER LEVEL Botton.

• WATER LEVEL is automatically selected for
FUZZY(normal) program.
The following settings are indicated as the button is pushed
7 8 9 10

CHILD LOCK FUNCTION

• Use to lock or unlock the control
buttons to prevent settings from
being changed by a child.
To lock, push the RINSE and SPIN
buttons simultaneously and to
unlock push them one more time
during the washing process.

(refer to page 25)

1 2 3 4 5 6 7

WASH. RINSE. SPIN BUTTON

• Use when wash, rinse, spin
time need to be adjusted.

• The time increases when the
button is pressed .

• If adjustments are needed
during the wash, press the
[start/pause] button before
making any changes.

• When the button is pressed
during washing, the remaining
time is displayed.

NOTE

* Even if the water level or the water temperature are changed by the user in FUZZY(Normal) Program, the sensor will still work.

The sensor algorithm may differ according to models.

* The control panel may differ according to different models.

15

Before Starting to Wash

TIME LEFT, DELAY START (RESERVATION),

ALARM INDICATION

• Time left - During operation, the remaining time indicated.

• DELAY START INDICATION (RESERVATION) - When DELAY
START (RESERVATION) program is selected, it indicates the finishing
time. (RES.=DELAY)

• Alarm indication -When an error occurs, an error message appears to
indicate the abnormality. For example, indicates that the lid is open.

DELAY START (RESERVATION) BUTTON

• Use to set a delayed finishing time.

• The time increases when the button is pushed.

• The following settings are indicated as the button
is pushed 3

...46 48 3 HOUR.

• To cancel delay time, turn the power switch off.

(refer to page 24)

4 5 ...11 12 14 16

• Use for selecting wash program.

• This button allows you to select 8 different programs for
different kinds of laundry and dirtiness.

• program selections light up in sequence as follows:
FUZZY(Normal)

EXTRA CLEANING SILENT FAVORITE TUB
CLEAN FUZZY(Normal) etc.
Select the desired program by pressing the button.

PROGRAM BUTTON

POWER(AUTO OFF)
BUTTON

• Use to turn the power on or off.

• Push again and power goes on or off

• The power goes off automatically
about 10 seconds after the wash is
finished.

START/PAUSE BUTTON

• Use to start or pause the
washing process.

• Repeats start and pause by
pushing the button.

WOOL QUICK WASH JEANS

16

ashing Programs

W

Washing

Programs

Washing Programs

(Normal Wash)

Used for normal loads, this
mode automatically selects the
most appropriate conditions
and completes the sequence
in one operation. The built-in
sensor detects the size of the
load and the ideal wash
power and wash, rinse and
spin times are set accordingly.

Use this program for washing
delicate fabrics such as lingerie and
woolens. (wash only “water
washable” clothes)
Before washing your woolens
check the care label for the
washing instructions.
(wash only water washable clothes)

Use this mode when washing
lightly soiled clothes for a short
time. The highly recommended
laundry amount is under 2.0kg.

Add

the

laundry

1

1

1 5

2

3

• Select the WOOL

program on the
Control panel.

3

• Select the

QUICK WASH

program on the
Control panel.

• Add the appropriate

2

• Use neutral

• When washing

2

• Add the appropriate

Add

the Detergent

quantity of Detergent as
indicated by the
WATER LEVEL next to

WATER DETERGENT.

Or follow the Detergent
manufacturer’s
instructions

Detergent
appropriate for the
laundry.

woolens use a
mild Detergent
recommend- ed
for washing wool.

quantity of Detergent
as indicated by the
WATER LEVEL next
to WATER
DETERGENT. Or
follow the Detergent
manufacturer’s
instructions

4

5

Use Jean program when
washing Jeans of different sizes

Use this program to increase
rinsing performance.
This would include underwear
and baby clothes.

1

1

3

• Spread
the jean
evenly in
the tub

3

2

• Select the JEANS

program on the
Control panel.

2

• Select the EXTRA
CLEANING

program on the
Control panel.

5

5

RECOMMENDED LOADS

17

Washing Programs

3

• The pulsator rotates for 8
seconds to detect the
laundry load.

• Then the WATER LEVEL
and the amount of
Detergent to be used will
be shown and water will
be supplied.

• Water will be

4

4

Close the lid

5 6

supplied for 2
minutes after the
start of the wash
to supplement
the water the
laundry has
absorbed.

6

6

Finish

• When the wash
program ends, the
buzzer will ring for
10 seconds
before the Power
goes off
automatically.

7

7

Caution & Note

• If water is already in the tub, or
putting wet laundry into the tub
before starting will increase the
WATER LEVEL.

• With lightweight bulky loads,
WATER LEVEL can be set low.

• Changes to Water Temperature
(HOT/COLD) and wash level are
possible during operation.

(refer to page 14)

• When setting the WATER LEVEL
manually, do not set to Medium to
prevent damage to laundry.

• Washing with HOT water may
damage the laundry (Water is set to
cold automatically). Ensure that the
load is under 2kg.

• In order to avoid damage to
laundry, the spin cycle may appear
slow.
This also avoids wrinkles and
clothing may still contain some
water. This is normal.

• When static pressure of water

is more than 2kg/cm2, the
QUICK WASH course will be
within 19min.

Maximum

Load

Less than

16.0 kg

Less than

2.0 kg

Less than

2.0 kg

4

4

6

6

7

Less than

16.0 kg

7

Less than

16.0 kg

18

OAK Wash

S

Press the POWER (AUTO OFF) button to turn power on.

1

Washing Programs

Press the PROGRAM button to select the washing program.

2

Press the WASH button, to select SOAK program.

3

Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty.
SOAK mode can be used with FUZZY or JEANS or SILENT or FAVORITE program.

• SOAK will not work in WOOL and QUICK WASH,
TUB CLEAN Program.

• Keep pressing the WASH button until the light turns on
‘SOAK’ and ‘WASH’ simultaneously as next image.

• SOAK program only works when socking time is 40, 50 or 60
minutes.

Add the Detergent.

4

Add the laundry and press the START/PAUSE button.

5

Close the lid.

6

Finish

NOTE

• Order of Soak-Wash timing

• Select soaking time 40minutes, 50minutes, or 60minutes (including washing time) by pressing the
Wash button repeatedly.

• If necessary, select the times of Rinse and the time for Spinning by pressing the Rinse or Spin
buttons till you reach the desired times.

• The appropriate quantity of Detergent marked next to the
WATER LEVEL of WATER-DETERGENT.

• The WATER LEVEL will be shown and water will be
supplied.

• Water will be supplied for 2 minutes after the start of the wash
to supplement the absorbed water by the laundry.

• When the wash program ends, the buzzer will ring for
10seconds before the Power goes off automatically.

Soak-Wash

AVORITE Wash

Pressing the FAVORITE button allows you to store your FAVORITE wash conditions in the

F

normal cycle memory and then recall it for use at a later time.

Press the POWER (AUTO OFF) button to turn power on.

1

Select the FAVORITE program.

2

Select your FAVORITE wash conditions.

3

• Press the TEMP. button to select wash Water
Temperature.

• Press the WATER button to select WATER.

• Press the WASH button, the RINSE button & the SPIN
button to select wash time, rinse time & spin time
respectively you want to store.

19

Washing Programs

Press the START/PAUSE button to store & start your FAVORITE wash cycle.

4

Power turns off automatically after wash.

NOTE

To recall your FAVORITE cycle.

1. Press POWER on.

2. Select the FAVORITE cycle by pressing the PROGRAM.

3. Press the START/PAUSE button. Then the wash cycle starts.

20

ILENT Wash

S

Press the POWER (AUTO OFF) button to turn power on.

1

Washing Programs

Press the PROGRAM button to select SILENT program.

2

Add the laundry into the washing tub.

3

Press the START/PAUSE button.

4

Use this program to wash quietly in SILENT especially during late night and dawn.

Add the Detergent and close the lid.

5

NOTE

• SILENT program takes longer washing time than FUZZY(Normal) program.

• To reduce noise in spinning, spin rpm is lower than normal spinning rpm. So the laundry has
more moisture than normal.

21

UB CLEAN

T

If scrud is allowed to build-up in the machine it can result in stains on your clothes or unpleasant smell in
your washer.
Scrud is the way build-up that can occur within any washer when the fabric softener comes into contact
with Detergent, and according to particular degree of dirtiness or quality of water to be use, in these
case, use this program to clean inner tub and outer tub.

Press the POWER (AUTO OFF) button to turn power on.

1

Press the PROGRAM button to select the TUB CLEAN program.

2

Press the START/PAUSE button.

3

After 10 minutes of water supplement. Add the oxygenated bleach (about 300 m ).

4

• Do not use Detergent box.

• Do not place any laundry inside tub.

• Left time is displayed.

Additional Function Program

Close the lid.

5

NOTE

• Before using this program remove lint inside lint filter.

• When using this program, do not place any laundry inside tub.

• This program takes about 3 hours to be completed.

• After using this program, remove dirt inside filter.

• After finishing this program, open the lid of wash to remove irritant odor.

• Do not pour bleach into the tub directly. It might cause damage the tub.

• Do not leave diluted oxygenated bleach inside tub for long time.
It rusts the tub must drain the remained diluted oxygenated water out.

• Use this program once for every month.

• Do not use this program repeatedly.

• When the lid is open the machine will not operate, and an
alarm signal will remind you to close the lid.

22

IR DRY

AIR DRY for your laundary.

A

Press the POWER (AUTO OFF) button to turn power on.

1

Additional Function Program

Press the AIR DRY button to select the desired timing.

2

Press the START/PAUSE button.

3

Close the lid.

4

NOTE

Select "Air Dry" 30min ‘ TUB DRY

-Use this mode to keep inner tub from getting moldy caused by remaining moisture.

- Do not place any laundry inside tub.

- Use this mode once a week.
Caution) For better performance, put drain hose down to the floor so that water inside will be
completely drained out.

Select “Air Dry” above 1 hour

- Use this mode to reduce the drying time by minimizing remaining moisture on the laundry.

- In general, this is very effective on synthetic items(100% polyester).

- Do place laundry which is evenly distributed(Under 2kg).

- For normal clothes : Select 1 hour

- For synthetic items(100% polyester): Select 2 hours or 3 hours(on some models)

23

ption Washing

O

1

2

When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.

Press the POWER (AUTO OFF) button to turn power on.

Only Wash Only Rinse Only Spin

Press the WASH button to
select the desired timing.

Only Wash,Rinse Only Rinse,Spin

Press the WASH button to
select the desired timing.

Press the RINSE button to
select the desired times of
rinse.

Press the RINSE button to
select the desired times of
rinse.

Press the RINSE button to
select the desired times of
rinse.

Press the SPIN button to
select the desired times of
spin.

Additional Function Program

Press the SPIN button to
select the desired times of
spin.

Only Drain

When you want to only
drain, wait until the water
in the washing tub drains
completely.

You can use this option
for preventing wrinkles of
laundry

Press the WATER LEVEL button, to control the water level according to the

3

amount of laundry. If you do not choose anything, it is set the middle water
level automatically.

Add the laundry into the washing tub.

4

Press the START/PAUSE button.

5

Add the detergent and close the lid.

6

NOTE

• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not be
drained off. If you wish to drain the water, press SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button.

• If you do not specify the water level, then Medium will be automatically selected.

• If only Rinse is selected, the process will start from Water Supply.