INDIA'S
N o.1
WASHING MACHINE*
START
Owner's Manual
Pleasereadthismanualcarefulyandthoroughly
beforeoperatingthisunit.
Recordmodelnameandserialnumberoftheset.
Quotethisinformationtoyourdealerwhenyou
requireservice.
MODEL : WF-T7062DN
WF-T7512FN
WF-N6861DN
WF-N7035DN
WF-N7036DN
WF-N7065DN
WF-N7066DN
WF-N6866DN
WF-N6836DN
Contents
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your washer. You will find many answers to common problems in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.
Introduction |
Product Features |
3 |
|
Safety Information |
4 |
|
Identification of Parts |
5 |
|
|
|
|
|
|
Installation |
Placing, Leveling and Installation |
6 |
|
Connecting Water Supply Hose |
7 |
|
Connecting Drain Hose |
9 |
|
Grounding Method |
10 |
|
|
|
|
Care Before Washing |
11 |
|
Preparation for Washing |
11 |
Before Starting to Wash |
Use of Water, Detergent, Bleach and Softener |
12 |
|
Water Level and Amount of Detergent |
13 |
|
Use of Bleach |
13 |
|
Use of Softener |
14 |
|
Stain Removal Techniques |
15 |
|
Function of each Button |
16 |
|
|
|
Washing Programs |
Fuzzy Wash (Normal Wash) |
20 |
|
Economy Wash |
20 |
|
Jean Wash |
20 |
|
Wool Wash |
20 |
|
Turbo Wash |
20 |
|
Washing Process |
22 |
|
|
|
|
|
|
Additional Features |
Delay Start (Reservation) Wash |
24 |
|
Child Lock, Mute |
24 |
|
|
|
Maintenance |
Cleaning Inlet Valve Filter |
26 |
|
Cleaning Lint Filter |
26 |
|
Cleaning and Maintenance |
27 |
|
|
|
|
|
|
|
Quick Reference for Cloth Weights |
28 |
Troubleshooting |
Common washing problems |
29 |
|
Troubleshooting |
30 |
|
|
|
|
|
|
Specification |
Specification |
31 |
|
|
|
Branch & Remote Area Offices |
Branch & Remote Area Offices |
|
|
|
|
Terms of Warranty |
Warranty Card |
|
2
Contents
Product Features
Washer doesn't operate while the lid is open. If the lid is open during the wash, rinse or spin cycles, the operation stops for safety.
Fuzzy Logic Control
A built-in load sensor automatically detects and measures the laundry load and a microprocessor optimizes washing conditions such as ideal water level, washing time and optimum detergent quantity indication.
Advanced technology is built into the Electronic Control System which ensures the best washing result.
START |
SENSING |
SETTING |
WASHING |
AUTO |
Laundry Sensor |
Optimum |
POWER |
||
|
Water Level |
Washing |
|
OFF |
|
Sensor |
Condition |
|
Turbo drum washing
When "Punch + 3" washing wings turn, the washing tub turns in the opposite direction. This makes the both sides current of water which improve washing-performance by rubbing clothes strongly.
3 Step washing
3 step washing makes best washing performance with low tangling.
Rubbing |
Rubbing and |
Shaking and |
|
Shaking |
Disentangling |
Auto Restart
In the event of a power failure, the washing machine will automatically start its cycle from the point of interruption when power is resumed.
Lint Filter
Lint and loose threads from laundry generated during the washing cycle are caught by the lint filter for a cleaner wash.
ATTENTION Be sure to remove the unit from all packing base, otherwise the machine will not be able to operate properly.
3
Introduction
Safety information
Manufacturer is not responsible for accidents caused by the user as a result of not following the user's guide.
In Operation
• Do not insert the hand inside the inner-tub -dur ing operation. Hands may get caught
in the laundry. • If the machine does not stop
operating up to 15 seconds after opening the lid, stop using the machine and contact Area Service center
for repair.
Installation Area
• Avoid area exposed to snow, rain, or where humidity is high. Avoid water-contact to the switch area. It may cause electric shock or malfunction.
Children's Safety
• Do not let children climb on top of the machine
or climb into the inner-tub
.
• Do not let children insert the hand into the bottom of the machine where is a revolving part.
Injury may occur!
Electric Outlet
•Avoid connecting several electric devices into a single outlet. It may cause a fire.
Volatile Material
• Do not wash or dry clothes stained with volatile material such as Benzene or thinner . It may cause an explosion,
fire or burn.
Heat
•Avoid electric heaters, candles, cigarette lighters, bug smokers, etc., near the machine. It may ignite or deform plastic parts.
4
Introduction
Hot Water
•Avoid using hot water over 70°C. It may deform plastic parts or cause malfunctions.
Grounding
•Before connecting the power cord, make sure to ground, otherwise it may cause electric shock.
10
Refer Page No.
I dentification of Parts
Body
12 |
POWDER DETERGENT |
BOX FOR DELAYED |
|
|
WASHING |
14 |
SOFTENER INLET |
Softener will automatically |
|
|
flow into the tub. |
13 |
INLET H OLE F OR |
BLEACH |
FUNCTION SELECTOR
TUB
* START/PAUSE BUTTON
Use to start or stop the washing machine temporarily.
6 |
ADJUSTABLE LEGS |
Use to level the washing |
|
machine for correct balance |
& spin operation.
(2 adjustable legs are optional. Some models have provision for only 1 adjustable leg).
*WATER SUPPLY |
7 |
HOSE |
|
Make sure the water |
|
does not leak. |
|
POWER PLUG |
|
If the supply cord is |
|
damaged, it must be |
|
replaced by the |
|
manufacturer |
|
or its service agents |
|
or similarly qualified |
|
person in order to |
|
avoid a hazard. |
|
LINT FILTER |
26 |
Clean regularly to stop |
|
linting on the clothes |
|
load. |
|
*CASTER |
6 |
Use for easy translocation |
DRAIN HOSE
Keep the drain hose flipped down while washing is in process.
BASE
WASHING WINGS
Vertical movement of washing punch can be operated when a sufficient amount of laundry is deposited.
Set the proper water level, an excessive amount of water may increase entanglement of laundry.
Accessories
Water supply hoses |
Drain hose |
Anti-rat cover |
Screw
Snap Ring
Note
"*" Parts can be different according to the model.
5
Introduction
Placing, Leveling and Installation
Improper installation of the washer may cause noise and malfunctioning.
1. |
The ventilating openings in the base area must not be obstructed by carpeting when the washing machine is |
|
CAUTION |
installed on a carpeted floor. |
|
2. |
Install the washing machine on a level and firm |
Installation area |
surface, any tilt should be less than 4°. |
1 |
|
|
|
Install the washer on flat and firm surface. |
How to adjust leveling
2 Checking level
The Basement is not flat, fill the water just touching the Pulsator and see uniform distribution. If not, adjust the legs as shown in the figure.
Adjustable leg
Turn the adjustable legs to set the washer horizontal (Both the front legs).
(2 adjustable legs are optional. Some models have provision for only 1 adjustable leg).
H Don't add anything under back side legs.
Distance between drain hose and the wall
Distance between drain hose and the wall should be more than 10cm, and the distance between the other part or the
rear part and the wall should be more than 2 cm.
.
More than 2cm
More than 2cm
More than 10cm
Anti-rat cover installation
Insert the anti rat cover firmly from back side or
Front side of washing machine and screw it.
High Base
FIXING POSITION
Low Base
Screws
Anti Rat Cover
Adjustable Leg
Top View
3 Checking Proper placement
Press the corners of the machine diagonally
as shown in the figure, If any movement is observed, adjust the legs for proper leveling.
Moving of the Machine
Casters are provided for easy translocation of your machine
*Grip the machines properly as shown in fig.
*Tilt the machine towards your side at a angle 45O~ 55O.
Casters
Note : * Be careful that you should not drop the machine.
* Never move the machine on casters when there is load inside.
6
Installation