LG WDP3W, WDP3B, WDP3S Owner's Manual

PEDESTAL

INSTALLATIONINSTRUCTIONS

Please read this guide

thoroughly before

installation and keep it handy

for reference at all times.

PIEDESTAL

To contact LG Electronics, 24 hours a day,
7 days a week: 1-800-243-0000

Or visit us on the Web at: us.lge.com

Pour contacter LG Electronics, 24 heures par jour,
7 jours par semaine: 1-800-243-0000
Ou visitez notre site Web & I'adresse: us.lge.com

NOmero telef6nico de LG Electronics, las 24 horas
del dia, 7 dias a la semana: 1-800-243-0000

O visitenos en la Web en: us.lge.com

DIRECTIVES

D'INSTALLATION

Veuillez Iirece guide dans son

integrite avant rinstallation et

conservez-le a portee de lamain

pour reference ulterieure.

PEDESTAL

INSTRUCCIONES

DE INSTALACION

Leadetenidamente esta guia

antes de lainstalacion y guardela

a lamane come referencia

en todo memento.

Model/Modele/Modelo

WDP3W, WDP3B, WDP3S

P/No. 3828ER4001A

PEDESTALINSTALLATIONINSTRUCTIONS

PEDESTAL ACCESSORY

The pedestal accessory includes:

• Pedestal base

• One (1)drawer divider

• Four (4) brackets

• Eight (8) screws

• Wrench

To ensure safe and secure installation, please
thoroughly follow the instructions below.

AWARNING

• Incorrect installation can cause serious
accidents.

• The appliances are heavy. Two or more people
are required when installing the pedestal.

• Do not allow children to play on the drawer.

• Do not step on the handle.

NOTE: If appliances are already installed,
disconnect them from all power, water, or gas

lines and from draining or venting connections.

Tools Needed for Installation:

• Phillips-head screwdriver

• Wrench (supplied)

INSTALLATION

For dryer

For washer/combo

Make sure the leveling feet of the appliance

are fully retracted (see detail for leveling
washer feet in Step 2); then position the

appliance on top of the pedestal.
The washer feet will fit into the outermost

corner positions and the dryer feet will fit into
the innermost positions as shown.

NOTE: The appliance and pedestal assembly
must be placed on a solid, sturdy, level floor
for proper operation.

Once the leveling feet of the washer are fully
retracted, tighten all Iocknuts securely.

NOTE: The leveling feet on the dryer do not
have Iocknuts.

Tighten all 4

Iocknuts securely

J

2

PEDESTALINSTALLATIONINSTRUCTIONS

INSTALLATION (cont.)

Make sure the side surface of the appliance

is clean and dry. Remove paper backing from
the tape on the bracket.

Install 2 screws to securely attach the bracket

to the pedestal.
Once properly attached, firmly press the top

part of the bracket with the double-sided
tape to the side of the appliance. Repeat

steps 2-4 to attach the other brackets.
NOTE: If the brackets are not installed

properly, noise and vibration may result. Be
sure to remove paper backing and to use all

screws to install the brackets.

Move the appliance to the desired location.

Position the bracket as shown. The bent part

of the bracket should rest along the edge
of the pedestal, and the holes in the bottom

part of the bracket should align with the
holes in the pedestal.

J

J

Raise Lower

_J

Loosen the Iocknuts on all 4 leveling feet

of the pedestal until you can turn them
with the wrench. Turn clockwise to raise

or counterclockwise to lower. Once the
pedestal is level and all 4 feet are solidly

against the floor, securely tighten all Iocknuts
by hand.

NOTE: Noise and vibration may result if
Iocknuts are not tightened.

Be sure to connect the appliances to all

water, power, or gas lines and draining or
venting connections before operation.

If there is excessive vibration during the

first operation after installation, slightly
adjust the leveling feet.

5