LG WD-P1411RD6 Manual book

OWNER’S MANUAL

WASHING MACHINE

WD-P1411RD6

P/No.: MFL67379121

www.lg.com

Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the washer is installed correctly and safely. Leave these instructions near the washer after installation for future reference.

ENGLISH BAHASA

Contents....................................2

Product Features......................3

Important safety instructions

Important safety instructions .................4

Basic safety precautions .......................5

Save these instructions.........................6

Safety instructions for use.....................7

Specifications...........................8

Installation

Removing packing ................................9

Removing transit bolts ..........................9

Installation place requirements ...........10

Connecting water supply hose............12

Installation of drain hose .....................14

Leveling...............................................15

How to use washer

Operating washing machine ...............17

Care before washing...........................18

Washing program table.......................19

Drying Program Table.........................20

Extra options .......................................21

Operating data ....................................21

Control panel.......................................22

Additional program..............................23

- Time Delay........................................23

- Steam Wash .....................................23

- Favorite.............................................23

- Pre Wash ..........................................23

Options................................................24

- Wash.................................................24

- Rinse.................................................24

- Temp. ...............................................24

- Spin...................................................24

Other functions....................................24

- Spin Only .........................................24

- Refresh Cycle ...................................24

Child Lock ...........................................25

Beep On/Off ........................................25

Tub Clean ...........................................26

Door Lock & Detecting ........................26

Dry ......................................................27

Thank you for buying a LG Fully Automatic Washing Machine.

Please read your owner’s manual carefully, it provides instruction on safe installation, use and maintenance. Retain it for future reference.

Record the model and serial number of your washing machine.

Model No.

Serial No.

Date of Purchase

Adding detergent

Adding detergent and fabric softener..29

Maintenance

The water inlet filter.............................31

The drain pump filter ...........................32

Dispenser drawer................................33

The washing drum ..............................34

Cleaning your washer .........................34

Cold conditions ...................................34

Troubleshooting guide

Diagnosing problems ..........................35

Error messages...................................37

Using SMARTDIAGNOSIS™..............38

Terms of warranty ..................39

Contents

ENGLISH

추가선택 예약

Inverter Direct Drive system

The advanced Brushless DC motor directly drives the drum without belt and pulley.

Low noise speed control system

By sensing the amount of load and balance, it evenly distributes load to minimize the spinning noise level.

Child Lock

The Child Lock prevents children from pressing any button to change the settings during operation.

More economical with Intelligent Wash system

Intelligent Wash System detects the size of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption.

Built-in heater

Internal heater automatically heats the water to the best temperature on selected cycles.

Protection against creases

With the alternating rotation of the drum, creasing is minimized.

6 Motion

Washer is able to perform various drum actions or a combination of different actions depending on the wash program selected. Combined with a controlled spin speed and the ability of the drum to rotate both left and right, the wash performance of the machine is greatly improved, giving you perfect results every time.

Product Features

Important safety instructions

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

Your Safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION.

These words mean:

WARNING

You may be slightly injured or cause damage to the product if you do not follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

CAUTION

You will be killed or seriously injured if you don’t immediately follow instructions.

DANGER

ENGLISH

Important safety instructions

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following:

WARNING

• Before installation, check exterior damages. If it has, do not install.

• Do not install or store the washer where it will be exposed to the weather.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out.

• Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc.

• The appliance is not intended for use by young children or infirm persons without supervision. Do not allow children to play on, with, or inside this or any other appliance.

• Keep small animals away from the appliance.

• Do not leave the washer door open.

An open door could entice children to hang on the door or crawl inside the washer.

• Never reach into washer while it is moving. Wait until the drum has completely stopped.

• The laundry process can reduce the flame retardant of fabrics.

To avoid such a result, carefully follow the garment manufacturer’s wash and care instructions.

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may ignite or explode. Oil may

remain in the tub after a whole cycle resulting in fire during drying.

So, do not load oiled clothes.

• Do not slam the washer door closed or try to force the door open when locked. This could result in damage to the

washer.

• When the machine runs high temperature, the front door may be very hot. Don’t touch it.

• To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning.

• When unplugging power cord, do not pull out by grasping the cord.

Otherwise, the power cord may be damaged.

• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

■ Basic safety precautions

Important safety instructions

■ Basic safety precautions

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following:

WARNING

• Before discarding an old machine unplug it. Render the plug useless. Cut off the cable directly behind the appliance to prevent misuse.

• When a product was under water, Please call service center. There is a

risk of electric shock and fire.

• Appliance connected to the water mains using new hose-sets. Old hosesets should not be reused.

• To reduce the risk of personal injury, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety

warnings in this manual could result in property, personal injury or death.

• Do not push down the door excessively, when washer door open.

This could topple over the washer.

■ Save these instructions

Improper connection of the equipment-grounding conductor can result in electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.

• Do not use an adapter this will defeat the grounding plug.

• If you don’t have the proper outlet, consult an electrician.

WARNING

ENGLISH

Important safety instructions

To minimize the risk of fire within the inner bowl, the following should be observed:

• Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in a tumble dryer.

Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard. If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent-this will reduce, but not eliminate, the hazard. The ‘cool down’ cycle of tumble dryers should be used to reduce the temperature of the items. They should not be removed from the tumble dryer or piled or stacked while hot.

• Items that have been previously cleaned in, washed in, soaked in or spotted with petrol/gasoline, dry-cleaning solvents or other flammable or explosive substances should not be placed in a tumble dryer.

Highly flammable substances commonly used in domestic environments include acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some brands), turpentine, waxes and wax removers.

• Items containing foam rubber (also known as latex foam) or similarly textured rubber like materials should not be dried in a tumble dryer on a heat setting. Foam

rubber materials can, when heated, produce fire by spontaneous combustion.

• Fabric softeners or similar products should not be used during a drying cycle,

to eliminate the effects of static electricity unless this practice is specifically recommended by the manufacturer of the fabric softener or product.

• Undergarments that contain metal reinforcements should not be placed in a tumble dryer.

Damage to the tumble dryer can result if metal reinforcements come loose during drying. When available a drying rack could be used for such items.

• Plastic articles such as shower caps or babies waterproof napkin covers should not be placed in a tumble dryer.

• Rubber-backed articles, clothes fitted with foam rubber pads, pillows, rubber boots and rubber-coated tennis shoes should not be placed in a tumble dryer.

■ Safety instructions for use

■ Name : Front loading washing machine

■ Power supply : 220 - 240 V~, 50 Hz

■ Size : 600 mm(W)  640 mm(D)  850 mm(H)

■ Weight : 73 kg

■ Max.Watt : 2100 W (Wash) / 1500 W (Dry) / 1100 W (Steam)

■ Wash capacity : 10 kg (Wash) / 6 kg (Dry)

■ Permissible water pressure : 100 - 1000 kPa (1.0 - 10.0 kgf / cm

)

The appearance and specifications may vary without notice to improve the quality of the unit.

(For detergent and

fabric softener)

Drawer

Drain hose

Transit bolts

Power plug

Control panel

Drain pump filter

Lower cover cap

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or a similarly qualified person in order to avoid a hazard.

Drum

Door

Drain plug

Adjustable feet

Specifications

■

Accessories

Inlet hose(1EA) Option : Hot/Cold(2EA)

Spanner

ENGLISH

■ Removing packing

1. Remove the cardboard box and styrofoam packing.

2. Lift the washing machine and remove the base packing.

3. Remove the tape securing the power supply cord and drain hose.

4. Remove the inlet hose from the drum.

1. Unscrew the 4 bolts with

the spanner supplied.

2. Take out the 4 bolts along with the rubber bungs by slightly twisting the bung.

3. Close the holes with the caps supplied.

To prevent internal damage during transport, the 4 special bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs. If they are not removed, it may cause heavy vibration, noise and malfunction.

■ Removing transit bolts

Transit bolt

Installation

WARNING

• Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation ! Keep all packaging well away from children.

NOTE

• Keep the spanner provided for future use.

NOTE

• Keep the transit bolts for future use.

Spanner

Washer

Base Packing

• Level floor : Allowable slope under entire washer is 1˚.

• Power outlet : Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance.

• Additional Clearance : For Wall, 10cm:rear / 2cm : right & left side Do not place or store laundry products on top of washer at any times. They can damage the finish or controls.

■ Installation place requirements



Positioning



Location

• Install the washer on a flat hard floor.

• Make sure that air circulation around the washer is not impeded by carpets, rugs, etc.

• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the washer.

• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm) covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance.

• The washer must not be installed in rooms where the temperature can drop below 0°C.

• Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown.

• With the washer installed, adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable, and a clearance of approximately 20mm is left between the top of the washer and the underside of any work-top.

• This equipment is not designed for maritime use or for use in a mobile installations such as caravans, aircraft etc.

• Do not use an extension cord or double adapter.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard.

• Always unplug the machine and turn off the water supply after use.

• Connect the machine to an earthed socket in accordance with current wiring regulations.

• The appliance must be positioned so that the plug is easily accessible.

• Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service center

• Do not install your washing machine in rooms where temperature below freezing may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.

• If the appliance is delivered in the winter months and temperatures are below freezing : Place the washing machine at room temperature for a few hours before putting it into operation.



Electrical connection

Installation

Washer

approx.

2cm

ENGLISH

Installation

CAUTION

CAUTION concerning the Power cord

• Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

• Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in an electric shock or fire.

• Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. If the appliance is supplied from a cord extension set or an electrical portable outlet device, The cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.

CAUTION

• The appliance is not intended for use by young children or infirm persons without supervision.

• Young children should be supervised to ensure that they do not play with appliance.

1. Unscrew the adapter ring plate and the 4 adapter retaining screws.

2. Push the adapter onto the end of the tap so that the rubber seal forms a watertight connection. Tighten the adapter ring plate and the 4 screws.

3. Push the water supply hose vertically upwards so that the rubber packing within the hose can adhere completely to the tap and then tighten it by screwing it to the right.

• Water supply pressure must be between 100 kPa and 1000 kPa (1.0 - 10.0 kgf / cm2).

• Do not strip or crossthread when connecting inlet hose to the valve.

• If the water supply pressure is more than 1000 kPa, a decompression device should be installed.

• Periodically check the condition of the hose and replace the hose if necessary.

Type-A : Connecting Screw-type hose to tap with thread

• Screw the hose connector onto water

supply tap.

■ Connecting water supply hose



Step1 : Check rubber seal inlet hose



Step2 : Connect hose to water tap

• Two rubber seals are supplied with the

water inlet hoses. They are used for preventing water leaks. Make sure the connection to taps is sufficiently tight.

Upper connector

Rubber packing

Plate

Water supply hose

Fixing screw

Hose

connector

Rubber seal

Type-B : Connecting Screw-type hose to tap without thread

Installation

ENGLISH

1. Unscrew the adapter ring plate and the 4 adapter retaining screws.

2. Remove the guide plate if the tap is too large to fit the adapter.

3. Push the adapter onto the end of the tap so that the rubber seal forms a watertight connection. Tighten the adapter ring plate and the 4 screws.

4. Pull the connector latch plate down, push the inlet hose onto the adapter, and release the connector latch plate. Make sure the adapter locks into place.

Please use the horizontal tap

Horizontal tap Extension tap Square tap

Ring plate

Guide plate

Latch plate

Type-C : Connecting one touch type hose to tap without thread



Step3: Connect hose to washer

• Make sure that there are no kinks in the

hose and that they are not crushed.



When your washer has two valves.

• The Inlet hose which has red connector is

for the hot water tap.

• If the washer has two valves, the energy is

saved by using hot valve.

Installation

NOTE

• After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.

NOTE

• After connecting inlet hose to water tap, turn on the water tap to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket, and check the water temperature.

 Installation of drain hose

• The drain hose should not be placed higher than 100 cm above the floor. Water in the washer does not drain or drains slowly.

• Securing the drain hose correctly will protect the floor from damage due to water leakage.

• If the drain hose is too long, do not force back into the washer. This will cause abnormal noise.

• When installing the drain hose to a sink, secure it tightly with string.

• Securing the drain hose correctly will protect the floor from damage due to water leakage.

about 100 cm

about 145 cm

about 105 cm

max. 100 cm

Hose

Retainer

Tie strap

Laundry tub

max. 100 cm

Installation

ENGLISH

•

Diagonal Check When pushing down the edges of the washing machine top plate diagonally, the machine should not move up and down at all (Please, check both directions). If machine rocks when pushing the machine top plate diagonally, adjust the feet again.

2. If the floor is uneven, turn the adjustable feet as required. (do not insert pieces of wood etc. under the feet) Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level. (use a spirit level)

1. Leveling the washing machine properly prevents excessive noise and vibration. Install the appliance on a solid and level floor surface, preferably in a corner of the room.

■ Leveling

•

Once the washer is level, tighten the lock nuts up towards the base of the washer. All lock nuts must be tightened.

Raise Lower

Lock Nut

Tighten all 4 locknuts securely

Installation

NOTE

• Timber or suspended type flooring may contribute to excessive vibration and unbalance.

NOTE

• If the washing machine is installed on a raised platform, it must be securely fastened in order to eliminate the risk of falling off.



Concrete floors



Wooden floors (Suspended floors)

• The installation surface must be clean, dry and level.

• Install washer on a flat hard floor.



Tile floors (Slippery floors)

• Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into

70x70 mm sections and stick the pieces on to the dry tile where machine is to be placed.)

• Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.

•

Wooden floors are particularly susceptible to vibration.

•

To prevent vibration we recommend you place rubber cups under

each foot under washer at least 15mm thick, secured to at least

2 floor beams with screws.

•

If possible install the washer in one of the corners of the room, where the floor is more stable.

•

Fit the rubber cups to reduce vibration.

•

You can obtain the rubber cups (p/no.4620ER4002B) from the LG spares dept.

Rubber Cup

Installation

NOTE

• Proper placement and leveling of the washer will ensure long, regular and reliable

operation.

• The washer must be 100% horizontal and stand firmly in position.

• It must not “Seesaw” across corners under load.

• The installation surface must be clean, free from floor wax and other lubricant coatings.

• Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.

ENGLISH

 Operating washing machine

2. Open the door and load laundry.

1. Sort Laundry.

(Refer to 18 page)

3. Press the Power button.

4. Select a Program.

(Refer to 19~21 page)

5. Add detergent. (Refer to 29~30 page)

6. Press the Start/Pause button.

Select options at this time (Refer to 23~28 page)

■ Additional Program

■ Temperature

■ Spin Speed

■ Other functions

How to use washer

■ Care before washing

3. Caring before loading Combine large and small items in a load. Load large items first.

Large items should not be more than half the total wash load. Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.

• Check all pockets to make sure that they are empty. Items such

as nails, hair clip, matches, pens, coins and keys can damage both your washer and your clothes.

• Close zippers, hooks and strings to make sure that these items

don’t snag on other clothes.

• Pre treat dirt and stains by brushing a little detergent dissolved in

water onto stains like collars and cuffs to help lift dirt.

• Check the folds of the flexible gasket (gray) and remove any

small articles.

• Check inside of the drum and remove any item from a previous

wash.

• Remove any clothing or items from the flexible gasket to prevent

clothing and gasket damage.

2. Sorting To get the best results, sort clothes into loads that can be

washed with the same wash cycle. Water temperature and spin speed and different fabrics need to be washed in different ways. Always sort dark colors from pale colors and whites. Wash separately as dye and lint transfer can occur causing discolouration of white etc. If possible, do not wash heavily soiled items with lightly soiled one.

• Soil (Heavy, Normal, Light)

Separate clothes according to amount of soil.

• Color (White, Lights, Darks)

Separate white fabrics from colored fabrics.

• Lint (Lint producers, Collectors)

Wash lint producers and lint collectors separately.

1. Care Labels Look for a care label on your clothes.

This will tell you about the fabric content of your garment and how it should be washed.

Wash temperature

Normal machine wash

Permanent press

Hand wash

Sort laundry by...

Soiling

Colour

Wash temperature

Fabric type

Delicate

Do not wash

How to use washer

NOTE

• Before the first wash, select a cycle (Cotton 60°C, add a half load of detergent) allow the unit to wash without clothing. This will remove residues and water from the drum that may have been left during manufacturing.

ENGLISH

 Washing program table

•

Recommended courses according to the laundry type.

Program

Description

Fabric type

Proper

Temp.

Maximum

Load

Cotton

Provides better performance by combining various drum motions.

Provides optimized washing performance with less energy consumption.

Cotton

Eco

40°C

(Cold to 95°C)

60°C

(Cold to 60°C)

Rating

3 items

Color fast garments (shirts, nightdresses, pajamas, etc) and normally soiled cotton load (underwear).

This cycle provides nonstop process from washing to drying at once.

Use only drying cycle without washing.

Use for laundy that need rinsing only or to add rinse-added fabric softener to laundry.

Rinse+

Spin

Dry Only

Wash+

Dry

This cycle is suitable for casual shirts that do not need ironing after washing.

Polyamide, Acrylic, Polyester.

Easy Care

40°C

(Cold to 60°C)

Less than

4.5 kg

Less than

5.0 kg

Enables various fabrics to be washed simultaneously.

Various kind of fabrics except special garments. (Silk/delicate, sports wear, dark clothes, wool, Duvet/Curtains).

Mix

40°C

(Cold to 40°C)

Allergy

Care

Removes allergens such as house mites, pollen, and cat fur.

Cotton, underwear, pillow covers, bed sheets, baby wear.

60°C

Provides less noise and vibration and saves money by using overnight electricity.

Color fast garments (shirts, nightdresses, pajamas, etc) and lightly soiled white cotton (underwear).

Silent Wash

40°C

(Cold to 60°C)

No choice

40°C

(Cold to 95°C)

Removes wrinkles within 20mins with steam.

Refresh

Cotton mixed, Polyester mixed Dress shirts, blouses.

1 single size

This cycle is for large items such as bed cover, pillows, sofa covers, etc.

Cotton bedding except special garments (delicates, wool, silk, etc.) with filling: duvets, pillows, blankets, sofa covers with light filling.

Duvet

40°C

(Cold to 40°C)

Sports

Wear

This cycle is suitable for sports wear such as jogging clothes and running wear.

Less than

3.0 kg

Less than

6.0 kg

Rating

Coolmax, Gore-tex, fleece and Sympatex.

Wool

Enables to wash wool fabrics. (Please use detergent for machinewashable woolens).

Machine washable woolens with pure new wool only.

Quick 30

This cycle provides fast washing time for small loads and lightly soiled clothes.

Colored laundry which is lightly soiled fast.

Wet laundry which need drying only.

A small amount of laundry which can be dried.

Normal fabrics which can be washable.

30°C

(Cold to 40°C)

How to use washer

The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine M1008.

•

Water Temperature: Select water temperature to suit wash cycles. Always follow garment manufacture’s care label or instructions when washing.

 Drying Program Table

Program Fabric type

Maximum Load

Eco

Cupboard

4.5 kg

3.0 kg

6.0 kg

4.0 kg

0.5 kg

1.5 kg

Cotton or Linen Fabrics such as cotton towel, t-shirts, linen laundries.

Cotton or Linen Fabrics for ready to ironing. Iron

Easy Care Textiles, Synthetic Fabrics Suitable for Easy care, Mix programm washable clothes

Low Temp.

Time 30 min.

Time 60 min.

Time 120 min.

–

How to use washer

NOTE

• Neutral detergent is recommended.

• The wool cycle features gentle tumbling and low-speed spin for garment care.

• Select maximun selectable spin speed of washing programme to ensure the drying

result.

• Where the amount of laundry to be washed and dried in one programme does not

exceed the maximum weight permitted for the drying programme, washing and drying in one continuous sequence is recommended.

ENGLISH

 Extra options

* : This option is automatically included in the cycle and can not be deleted.

Cotton

Cotton Eco

Easy Care

Mix

Allergy Care

Silent Wash

Refresh

Duvet

Sports Wear

Quick 30

Dry Only

Wash+Dry

Rinse+Spin

Time

Delay

Favorite

Steam

Wash

IntensiveProgram

 Operating data

Cotton

Cotton Eco

Easy Care

Mix

Allergy Care

Silent Wash

Refresh

Duvet

Sports Wear

Quick 30

Dry Only

Wash+Dry

Rinse+Spin

1400

1000

1400

1000

800

1400

Program Max RPM

Pre

Wash

Time Save

Rinse

Dry

Rinse

Hold

How to use washer

Wool

■ Control panel

Power

• Press the Power button to turn power on and off.

• To cancel the Time Delay function, the power button should be pressed.

Program dial

• Programs are available according to the laundry type.

• Lamp will light up to indicate selected program.

Additional program

• Use these buttons to select the desired cycle options for the selected cycle.

LED display

• The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle.

Start/Pause

• This Start/Pause button is used to start wash cycle or pause the wash cycle.

• If temporary stop of wash cycle is needed, press the Start/Pause button.

• When in Pause, the power is turned off automatically after 4 minutes.

Options

• This allows you to select an additional cycle and will light when selected.

How to use washer

Start/Pause

button

Beep

On/Off

Power

button

Option

buttons

Additional

program

buttons

LED

display

Program

dial

SMARTDIAGNOSIS™ function is available only for the products with a SMARTDIAGNOSIS™ mark.

ENGLISH

1. Press the Power button.

2. Select a cycle.

3. Touch the Time Delay button and set time

required.

4. Press the Start/Pause button.

You can set a time delay so that the washing machine will start automatically and ﬁnish after a speciﬁed time interval.

Steam Wash features enhance washing performance with low energy consumption. Refresh cycle reduces creases in clothes.

1. Press the Power button.

2. Select steam course.

3. Touch the Steam Wash button.

4. Press the Start/Pause button.

Steam Wash

• For heavily stained clothes, underwear, or baby clothes.

• Avaible with the Cotton, Cotton Eco,

Mix, Easy Care, Duvet, Allergy Care, Refresh programs.

• Refresh cycle is always Steam Wash.

• Do not use Steam Wash for delicates such as wool, silk, and easily discoloured clothes.

Steam Wash

If the laundry is heavily soiled, “Pre Wash” course is effective.

1. Press the Power button.

2. Select a cycle.

3. Touch the Pre Wash button.

4. Press the Start/Pause button.

Pre Wash

Time Delay

■ Additional program

Favorite program allows you to store a customized wash cycle for future use.

1. Press the Power button.

2. Select a cycle.

3. Select the course.

(Washing method, number of rinses, spin speed, water temperature etc.)

4. Touch and hold Favorite program button for 3 seconds.

The Favorite program is now stored for future use.

To reuse the program, select Favorite program and press the Start/Pause.

Favorite

How to use washer

NOTE

• The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash load and other factors.

• Spin Speed level can be selected by pressing 'Spin' button repeatedly.

1. Press the Power button.

2. Touch the Spin button to select RPM.

3. Press the Start/Pause.

Spin only

• Time Save : This option can be used to reduce the time of a wash program.

• Intensive : If the laundry is normal and heavily soiled, “Intensive” option is effective.

Wash

• Rinse+: Add rinse once.

• Rinse Hold : The course is paused until start button is pressed again when rinse is finished.

Rinse

Spin

■ Options ■ Other functions

• By touching the Temp. button the water temperature can be selected.

- Cold

- 30°C, 40°C, 60°C, 95°C

• Water temperature can be selected according to the program.

Temp.

1. Press the Power button.

2. Select the Refresh program.

3. Touch the Steam Wash button

repeatedly until the correct item is displayed.

4. Press the Start/Pause button.

Refresh Cycle

How to use washer

NOTE

For better performance load 3 item or less. When Refresh cycle finishes, laundry will continue to be tumbled slowly for up to 30 minutes to prevent wrinkling. You can open the door in this time by pressing any button.

When you select "No Spin", it will still rotate for a short time with low speed to drain quickly.

NOTE

+ 56 hidden pages