LG Electronics WD3632HW, WD3632HS User Manual

Owner's Manual

WD3632HW WD3632HS

Please read this manual carefully. It provides instructions on safe installation, use, and maintenance. Retain it for future reference. Record the model and serial numbers of your machine and report this information to your dealer if your machine requires service.

Washing Machine

PRODUCT FEATURES

CONTENTS

¡Æ

Direct Drive System

The advanced Brushless DC motor directly drives the drum without belt and pulley.

¡Æ

Tilted Drum and Extra Large Door Opening

Tilted drum and extra large opening make it possible to load

and unload clothing more easily.

¡Æ

Water Circulation

Spray detergent solution and water onto the load over and over. Clothes are soaked more quickly and thoroughly during wash cycle. The detergent suds can be removed more easily by the water shower during rinse cycle. The water circulation system uses both water and detergent more efficiently.

¡Æ

RollerJets

Washing ball enhances the wash performance and reduces damage to the clothing. The jets spray and help tumble clothes to enhance washing performance while maintaining fabric care.

¡Æ

Built-in Heater

Internal heater automatically heats the water to the best temperature on selected cycles.

¡Æ

Child Lock

The Child lock prevents children from pressing any button to change the settings during operation.

Important Safety Information ...........................................................................................................................................3

Specifications...................................................................................................................................................................4

Installation Instructions....................................................................................................................................................5

Preparation Before Washing..........................................................................................................................................10

Using the Dispenser ......................................................................................................................................................11

Cycles ...........................................................................................................................................................................13

How to Use the Washer.................................................................................................................................................14

Maintenance..................................................................................................................................................................17

Troubleshooting Guide ..................................................................................................................................................20

Warranty........................................................................................................................................................................23

IMPORTANT SAFETY INFORMATION

ENGLISH

READ ALL INSTRUCTIONS BEFORE USE

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

IIMMPPOORRTTAANNTT SSAAFFEETTYY IINNSSTTRRUUCCTTIIOONNSS

• Read all instructions before using the washer.

• Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.

• Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

• Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

• Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children.

• Before the washer is removed from service or discarded, remove the door to prevent children from hiding inside.

• Do not install or store the washer where it will be exposed to the weather.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out.

• See Installation Instructions for grounding requirements.

• Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.

• Interior of washer and condensing duct should be cleaned periodically by qualified service personnel.

• ALWAYS follow the fabric care instructions supplied by the garment manufacturer.

• Do not place items exposed to cooking oil in your dryer, Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

• Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

WARNING :

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic

precautions, including the following:

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.

• Do not use an adapter or otherwise defeat the grounding plug.

• If you don’t have the proper outlet, consult an electrician.

GROUNDING INSTRUCTIONS

WARNING

: Improper connection of the equipment-grounding conductor can result in risk of

electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

SSAAVVEE TTHHEESSEE IINNSSTTRRUUCCTTIIOONNSS

SPECIFICATIONS

¡Æ

Accessories

¡Æ

Name : Front-loading Washing Machine

¡Æ

Power susupply : 120V~ 60Hz

¡Æ

Size : 68.6cm(W) X 75.0cm(D) X 108.6cm(H), 126.5cm(D, door open)

”(W) X 29-

”(D) X 42-

”(H), 49-

”(D, door open)

¡Æ

Weight : 198lbs. (90 kg)

¡Æ

Wash capacity : 3.22 cu. ft. (IEC: 3.72 cu. ft.)

¡Æ

Dry capacity : 3.22 cu. ft. (IEC: 3.72 cu. ft.) - Max. 11lbs(5kg)

¡Æ

Spin speed : No Spin/400/600/800/1000/1200 rpm

¡Æ

Permissible water pressure: 4.5 ~ 145 PSI (30 ~ 1000 kPa)

ƒR

Specifications subject to change by manufacturer.

ENGLISH

INSTALLATION INSTRUCTIONS

1. To prevent internal damage during transport, the special 4 bolts are locked. Before operating the washer, remove the bolts and braces.

• If they are not removed, it may cause heavy

vibration, noise, and malfunction.

3. Take out the 4 bolts and braces by twisting the braces slightly. Keep the 4 bolts, braces and the wrench for future use.

• Whenever the appliance is transported, the

shipping bolts and braces must be replaced.

2. Unscrew the 4 bolts with the wrench supplied. 4. Close the holes with the caps supplied.

The appliance is fitted with shipping bolts to prevent internal damage during transport.

¡ÆShipping bolts

Install or store unit where it will not be exposed to temperatures below freezing or exposed to outside weather conditions. Properly ground washer to conform with all governing codes and ordinances. The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in clean condition at all times. Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance guarantee.

¡ÆRemoving shipping bolts

cap

INSTALLATION INSTRUCTIONS

¡ÆInstallation clearances

The location must be large enough to fully open the washer door.

¡ÆWasher dimensions

• Most installations require a minimum 4 in. (10 cm) clearance behind the washer.

¡ÆMinimum installation spacing for

recessed area or closet installation

The following dimensions shown are for the minimum spacing allowed. Additional spacing should be considered for installation and servicing.

• Additional clearances might be required for wall, door and floor moldings.

• Additional spacing of 1 in. (2.5 cm) on all sides of the washer is recommended to reduce noise transfer.

• For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation openings are acceptable.

Companion appliance spacing should also be considered.

¡ÆLevel floor

Allowable slope under entire washer is 1°.

¡ÆPower outlet

Must be within 60 in.(1.5m) of either side of the washer. Do not overload the outlet with more than one appliance.

[Closet door with vents]

[Front view]

[Side view]

(12

.5 cm

)

42-

(108.6 cm)

36"

(91.5 cm)

27"

(68.6 cm)

29-

(75.0 cm)

29-1/2"1"

(2.5cm) (75.0cm)

(7.6 cm)

48"

(310 cm2)

24"

(155 cm2)

(10cm)

27"

(68.6 cm)

(2.5cm)

INSTALLATION INSTRUCTIONS

ENGLISH

• Water supply pressure must be between

4.5 ~ 145 PSI (30~1000 kPa)

• Don’t strip or crossthread when connecting Inlet hose to the valve.

• If the water supply pressure is more than 1000 kPa, a pressure reducer device should be installed.

• Two Sealing washers are supplied with the water inlet hoses to prevent water leaks.

• Check water tightness of washing machine connections by turning the tap completely on.

• Periodically check the condition of the hose and replace the hose if necessary.

• Make sure that there is no bent in the hose and that it is not crushed.

• The Inlet hose which has red connector is for the hot water tap.

• Hot and cold water faucets MUST be installed properly to your washer’s water inlet.

¡ÆConnecting water supply hose

NOTE : Washing Machine is to be connected to the water mains using new hoses.

Old hoses should not be used.

¡ÆElectrical connection

• Do not use an extension cord or double adapter.

• If the supply cord is damaged, it must be replaced by the manufacturer or its authorized service technician in order to avoid a hazard.

• Always unplug the machine and turn off the water supply after use.

• Connect the machine to a grounded socket in accordance with current wiring regulations.

• The appliance must be positioned so that the plug is easily accessible.

Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service center.

Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below the freezing point.

If the appliance is delivered in the winter months and temperatures are below freezing. Store the washing machine at room temperature for a few hours before putting it into operation.

INSTALLATION INSTRUCTIONS

¡ÆInstallation of drain hose

about 57˝

about 41˝

about 40˝

• The drain hose should not be placed higher than 96 in. from the bottom of the washer.

• Properly securing the drain hose will protect the floor from damage due to water leakage.

• This washer has a siphon break.

• Place the end of the drain hose in the hole of the

floor drain system.

• When installing the drain hose at a sink, secure it so it cannot break away and cause flooding and damage.

• Properly securing the drain hose will protect the floor from damage due to water leakage.

This equipment is not designed for maritime use or for mobile installations such as in RV’s, aircraft, etc. Turn off the valve if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain (gully) in the immediate vicinity. When disposing of the appliance, cut off the power cable, and destroy the plug. Disable the door lock to prevent young children being trapped inside. Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation! Keep all packaging from children.

about 40˝

about 57˝

about 41˝

max. 40˝

min. 23˝

+ 16 hidden pages