Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the product is installed
correctly and safely. Leave these instructions near the product after
installation for future reference.
The following safety guidelines are intended to prevent unforeseen risks or
damage from unsafe or incorrect operation of the product.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described
below.
This symbol is displayed to indicate matters and operations that can
cause risk. Read the part with this symbol carefully and follow the
instructions in order to avoid risk.
ENGLISH
WARNING
can cause serious injury or death.
CAUTION
can cause the minor injury or damage the product.
- This indicates that the failure to follow the instructions
- This indicates that the failure to follow the instructions
WARNING
To reduce the risk of re, electric shock, or injury to persons when using
your product, basic safety precautions should be followed, including the
following.
CHILDREN IN THE HOUSEHOLD
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do
not play with the appliance.
For use in Europe:
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
03
GROUNDING REQUIREMENTS
WARNING
For your safety, the information in this manual must be followed to
minimize the risk of re, explosion, or electric shock, or to prevent
property damage, injury to persons, or death.
•This appliance must be grounded. In the event of malfunction or breakdown, grounding
will reduce the risk of electric shock by providing a path of least resistance for electric
current.
•This appliance is equipped with a cord having an equipment-grounding conductor and
grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
•Improper connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualied electrician or service person if you are in doubt as to
whether the appliance is properly grounded.
•Do not modify the plug provided with the appliance. If it does not t the outlet, have a
proper outlet installed by a qualied electrician.
04
Important Safety Instructions
WARNING
To reduce the risk of re, electric shock, or injury to persons when using
your product, basic safety precautions should be followed, including the
following.
ENGLISH
Installation
•Never attempt to operate this appliance
if it is damaged, malfunctioning, partially
disassembled, or has missing or broken
parts, including a damaged cord or plug.
It can cause electric shock or injury.
•This appliance is heavy. Two or more
people may be needed to install and
move the appliance. Failure to do so
can result in injury.
•Store and install this appliance where
it will not be exposed to temperatures
below freezing or exposed to outdoor
weather conditions. Failure to do so can
result in leakage.
•Tighten the drain hose to avoid
separation. Splashing of water may
cause electric shock.
Operation
•Do not use a sharp object like drill or pin
to press or separate an operation unit. It
can cause the electric shock or injury.
•Only an authorized repair person from
LG Electronics service centre should
disassemble, repair, or modify the
product. Improper service may cause
injury, electric shock or re.
•Do not spray the water inside or outside
the product to clean it. Water can
damage the insulation, causing electric
shock or re.
•Keep the area underneath and around
your appliances free of combustible
materials such as lint, paper, rags,
chemicals, etc. Improper use can cause
re or explosion.
•If the supply cord is damaged, it must
be replaced by the manufacturer or
its service agents or similarly qualied
person in order to avoid a hazard.
•The appliance must not be installed
behind a lockable door, a sliding door
or a door with a hinge on the opposite
side to that of the tumble dryer, in such
a way that a full opening of the tumble
dryer door is restricted. The washing
machine shall not be installed at a
humid place.
•Do not put living animals, such as pets
into the product. It may cause injury.
•Do not leave this appliance door open.
Children may hang on the door or crawl
inside the appliance, causing damage
or injury.
•Never reach into this appliance while
it is operating. Wait until the drum has
completely stopped. Failure to do so
may result in injury.
05
•Do not put in, wash or dry articles that
have been cleaned in, washed in,
soaked in, or spotted with combustible
or explosive substances (such as
wax, oil, paint, gasoline, degreasers,
drycleaning solvents, kerosene,
vegetable oil, cooking oil, etc.). Improper
use can cause re or explosion.
•In case of ood, stop using the product
and contact the LG Electronics service
centre. Contact with water can cause
electric shock.
•Do not push down the door excessively,
when the appliance door is open. Doing
so may topple over the appliance and it
can cause the injury.
•If the drain hose or inlet hose is frozen
during winter, use it only after thawing.
Freezing may cause re or electric
shock, and frozen parts may cause
product malfunction or reduction in
product life span.
•Keep all washing detergents, softener
and bleach away from children. These
products contain poisonous materials.
•Do not plug multiple products into
multiple socket-outlets or extension
cords. This can cause re.
•Remove the power plug when you clean
the product. Not removing the plug may
result in electric shock or injury.
•Use new hose-sets supplied with the
appliance. Old hose-sets should not
be reused. Water leakage may cause
property damage.
•Do not touch the door during steam
cycles, drying or high-temperature
washing. The door surface can become
very hot. Allow the door lock to release
before opening the door. Failure to do
so may result in injury.
•Do not use inammable gas and
combustible substances (benzene,
gasoline, thinner, petroleum, alcohol,
etc.) around the product. It may cause
explosion or re.
•Do not touch the power plug with wet
hands. It can cause the electric shock
or injury.
•When pulling out the power plug from
an outlet, hold the power plug, not the
cable. Damage of the cable can cause
the electric shock or injury.
•Do not bend the power cable
excessively or place a heavy object on
top of it. Damage of the power cable
can cause electric shock or re.
06
ENGLISH
Technical Safety for Using the
Tumble Dryer
•Do not dry unwashed items in the
appliance.
•Items that have been soiled with
substances such as cooking oil,
vegetable oil, acetone, alcohol, petrol,
kerosene, spot removers, turpentine,
waxes and wax removers should be
washed in hot water with an extra
amount of detergent before being dried
in the appliance.
•Fabric softeners or other similar
products should be used according to
the fabric softener instructions.
•Remove all objects from pockets such
as lighters and matches.
Disposal
•Before discarding an old appliance,
unplug it. Render the plug useless.
Cut off the cable directly behind the
appliance to prevent misuse.
•Dispose of the packaging material (such
as vinyl and styrofoam) away from
children. The packaging material can
suffocate a child.
•Remove the door to the washing
compartment before this appliance is
removed from service or discarded to
avoid the danger of children or small
animals getting trapped inside. Failure
to do so can result in serious injury to
persons or death.
•Never stop this appliance before the
end of the drying cycle unless all items
are quickly removed and spread out so
that the heat is dissipated.
•This appliance is not to be used if
industrial chemicals have been used for
cleaning.
•Items such as foam rubber (latex foam),
shower caps, waterproof textiles, rubber
backed articles and clothes or pillows
•Appearance and specications may vary without notice to improve the quality of the
product.
Accessories
Inlet hose (1EA)
(Option : Hot
(1EA))
SpannerElbow Bracket
(for securing drain
hose)
Anti–slip sheets
(2EA)
(Optional)
Caps for covering
shipping bolt holes
Tie strap
08
ENGLISH
2.5 cm
15 cm
Installation Place Requirements
Location
59.4 cm
10 cm80.2 cm
139.6 cm
Level oor :
Allowable slope under the entire washing
machine is 1°.
Power outlet :
Must be within 1.5 meters of either side
of the location of the washing machine.
•Do not overload the outlet with more than one
appliance.
Additional Clearance :
/2.5 cm: right & left side
•Do not place or store laundry products on top of the
washing machine at any time.
•These products may damage the nish or controls.
Positioning
•Install the washing machine on a at hard oor.
•Make sure that air circulation around the washing
machine is not impeded by carpets, rugs, etc.
•Never try to correct any unevenness in the oor with
pieces of wood, cardboard or similar materials under
the washing machine.
•If it is impossible to avoid positioning the washing
machine next to a gas cooker or coal burning
insulation (85x60 cm) covered with aluminum foil on
the side facing the cooker or stove must be inserted
between the two appliances.
2.5 cm
For the wall, 10 cm: rear
•Do not install your washing machine in rooms where
freezing temperatures may occur. Frozen hoses may
burst under pressure. The reliability of the electronic
control unit may be impaired at temperatures below
freezing point.
•Please ensure that when the washing machine is
installed, it is easily accessible for an engineer in the
event of a breakdown.
•With the washing machine installed, adjust all four feet
using the transit bolt spanner provided to ensure the
appliance is stable, and a clearance of approximately
15 cm is left between the top of the washing machine
and the underside of any work-top.
•This equipment is not designed for maritime use or for
use in mobile installations such as caravans, aircraft
etc.
Electrical Connection
•Do not use an extension cord or double adapter.
•Always unplug the washing machine and turn off the
water supply after use.
•Connect the washing machine to an earthed socket in
accordance with current wiring regulations.
•The washing machine must be positioned so that the
plug is easily accessible.
•Repairs to the washing machine must only be carried
out by qualied personnel. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local service centre.
•If the washing machine is delivered in winter and
temperatures are below freezing, place the washing
machine at room temperature for a few hours before
putting it into operation.
09
Unpacking and Removing
Shipping Bolts
Lift the washing machine off the foam base.
1
•After removing the carton and shipping material,
lift the washing machine off the foam base. Make
sure the tub support comes off with the base
and is not stuck to the bottom of the washing
machine.
•If you must lay the washing machine down to
remove the carton base, always protect the side
of the washing machine and lay it carefully on
its side. DO NOT lay the washing machine on its
front or back.
Install the hole caps.
3
•Locate the hole caps included in the accessory
pack and install them in the shipping bolt holes.
Cap
NOTE
•Save the bolt assemblies for future use. To
prevent damage to internal components, DO NOT
transport the washing machine without reinstalling
the shipping bolts.
•Failure to remove shipping bolts and retainers
may cause severe vibration and noise, which
can lead to permanent damage to the washing
machine. The cord is secured to the back of the
washing machine with a shipping bolt to help
prevent operation with shipping bolts in place.
Tub Support
(Optional)
Remove the bolt assemblies.
2
•Starting with the bottom two shipping bolts, use
the spanner (included) to fully loosen all shipping
bolts by turning them counterclockwise. Remove
the bolt assemblies by wiggling them slightly
while pulling them out.
Shipping
bolt
Carton base
Retainer
10
ENGLISH
Using Anti-Slip Sheets (Optional)
If you install the washing machine on a slippery surface,
it may move because of excessive vibration. Incorrect
leveling may cause malfunction through noise and
vibration. If this occurs, install the anti-slip sheets under
the leveling feet and adjust the level.
Clean the oor to attach the anti-slip sheets.
1
•Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains, the
anti-slip sheets may slip.
Adjust the level after placing the washing machine
2
in the installation area.
Place the adhesive side of the non-skid pad on the
3
oor.
•It is most effective to install the anti-slip sheets
under the front legs. If it is difcult to place the
pads under the front legs, place them under the
back legs.
This side up
Adhesive side
Wooden Floors (Suspended
Floors)
•Wooden oors are particularly susceptible to vibration.
•To prevent vibration we recommend you place rubber
cups at least 15 mm thick of the each foot of the
washing machine, secured to at least two oor beams
with screws.
Rubber Cup
•If possible install the washing machine in one of the
corners of the room, where the oor is more stable.
•Fit the rubber cups to reduce vibration.
•You can obtain rubber cups (p/no.4620ER4002B) from
the LG Service Centre.
NOTE
•Proper placement and leveling of the washing
machine will ensure long, regular, and reliable
operation.
•The washing machine must be 100% horizontal
and stand rmly in position.
•It must not ‘Seesaw’ across corners under the
load.
•The installation surface must be clean, free from
oor wax and other lubricant coatings.
•Do not let the feet of the washing machine get
wet. Failure to do so may cause vibration or noise.
Ensure the washing machine is level.
4
•Push or rock the top edges of the washing
machine gently to make sure that the washing
machine does not rock. If the washing machine
rocks, level the washing machine again.
11
Leveling the Washing Machine
Connecting Inlet Hose
If the oor is uneven, turn the adjustable feet as required
(Do not insert pieces of wood etc. under the feet). Make
sure that all four feet are stable and resting on the oor
and then check that the appliance is perfectly level (Use
a spirit level).
•Once the washing machine is level, tighten the lock
nuts up towards the base of the washing machine. All
lock nuts must be tightened.
Raise
Lock Nut
Lower
Tighten all 4
locknuts securely
•Diagonal Check
When pushing down the edges of the washing
machine top plate diagonally, the washing machine
should not move up and down at all (Check both
directions). If the washing machine rocks when
pushing the machine top plate diagonally, adjust the
feet again.
•Water supply pressure must be between 0.1 MPa and
1.0 MPa (1.0 ‒ 10.0 kgf/cm2).
•Do not strip or crossthread when connecting inlet hose
to the valve.
•If the water supply pressure is more than 1.0 MPa, a
decompression device should be installed.
•Periodically check the condition of the hose and
replace the hose if necessary.
Checking Rubber Seal Inlet Hose
Two rubber seals are supplied with the water inlet hoses.
They are used for preventing water leaks. Make sure the
connection to taps is sufciently tight.
Hose connector
Rubber seal
NOTE
•Timber or suspended type ooring may contribute
to excessive vibration and unbalance.
•If the washing machine is installed on a raised
platform, it must be securely fastened in order to
eliminate the risk of falling off.
12
Hose connector
Rubber seal
ENGLISH
Connecting Hose to Water Tap
Connecting screw-type hose to tap with thread
Screw the hose connector onto the water supply tap.
Connecting screw-type hose to tap without
thread
Loose the four xing screws.
1
Upper
connector
Rubber
seal
Push the adapter onto the end of the tap so that
3
the rubber seal forms a watertight connection.
Tighten the four xing screws.
Push the inlet hose vertically upwards so that the
4
rubber seal within the hose can adhere completely
to the tap and then tighten it by screwing it to the
right.
Plate
Inlet hose
Fixing screw
Remove the guide plate if the tap is too large to t
2
the adapter.
Guide plate
Connecting one touch type hose to tap without
thread
Unscrew the adapter ring plate and loose the four
1
xing screws.
Ring plate
Remove the guide plate if the tap is too large to t
2
the adapter.
Guide plate
13
Push the adapter onto the end of the tap so that
3
the rubber seal forms a watertight connection.
Tighten the adapter ring plate and the four xing
screws.
Pull the connector latch plate down, push the inlet
4
hose onto the adapter, and release the connector
latch plate. Make sure the adapter locks into place.
Latch plate
Connecting Hose to Washing Machine
Make sure that there are no kinks in the hose and that
they are not crushed.
When your washing machine has two valves.
•The Inlet hose with the red connector is for the hot
water tap.
NOTE
•After completing connection, if water leaks from
the hose, repeat the same steps.
Use the most conventional type of tap for the
water supply. In case the tap is square or too big,
remove the guide plate before inserting the tap
into the adaptor.
NOTE
•After connecting the inlet hose to the water
tap, turn on the water tap to ush out foreign
substances (dirt, sand, sawdust, etc.) in the water
lines. Let the water drain into a bucket, and check
the water temperature.
Using the horizontal tap
Horizontal tap
Extension tap
Square tap
14
Installation of Drain Hose
•The drain hose should not be placed higher than 100
cm above the oor. Water in the washing machine
may not drain or may drain slowly.
•Securing the drain hose correctly will protect the oor
from damage due to water leakage.
•If the drain hose is too long, do not force it back into
the washing machine. This will cause abnormal noise.
about 100 cm
about 145 cm
ENGLISH
max. 100 cm
about 105 cm
•When installing the drain hose to a sink, secure it
tightly with string.
•Securing the drain hose correctly will protect the oor
from damage due to water leakage.
Laundry tub
Hose
retainer
Tie strap
max. 100 cm
max. 100 cm
15
OPERATION
Using the Washing Machine
Before the rst wash, select a cycle (Cotton 60 °C, add
a half load of detergent), allow the washing machine
to wash without clothing. This will remove residue and
water from the drum that may have been left during
manufacturing.
Sort laundry and load items.
1
•Sort laundry by fabric type, soil level, colour and
load size as needed. Open the door and load
items into the washing machine.
Add cleaning products and/or detergent and
2
softener.
•Add the proper amount of detergent to the
detergent dispenser. If desired, add bleach or
fabric softener to the appropriate areas of the
dispenser.
Choose the desired washing cycle.
4
•Press the Cycle button repeatedly or turn the
cycle selector knob until the desired cycle is
selected.
Begin cycle.
5
•Press the
The washing machine will agitate briey without
water to measure the weight of the load. If the
Start/Pause
minutes, the washing machine will shut off and
all settings will be lost.
End of cycle.
6
•When the cycle is nished, a melody will sound.
Immediately remove your clothing from the
washing machine to reduce wrinkling. Check
around the door seal when removing the load for
small items that may be caught in the seal.
Start/Pause
button is not pressed within 60
button to begin the cycle.
Turn on the washing machine.
3
•Press the
machine.
16
Power
button to turn ON the washing
ENGLISH
Sorting Iaundry
Look for a care label on your clothes.
1
•This will tell you about the fabric content of your
garment and how it should be washed.
•Symbols on the care labels.
Wash temperature
Normal machine wash
Permanent press
Delicate
Hand wash
Do not wash
Sorting laundry.
2
•To get the best results, sort clothes into loads
that can be washed with the same wash cycle.
•Different fabrics need to be washed at varying
temperatures and spin speeds.
•Always sort dark colours from pale colours and
whites. Wash separately as dye and lint transfer
can occur causing discolouration of white and
pale garments. If possible, do not wash heavily
soiled items with lightly soiled ones.
– Soil (Heavy, Normal, Light)
Separate clothes according to amount of soil.
– Colour (White, Lights, Darks)
Separate white fabrics from coloured fabrics.
– Lint (Lint producers, Collectors)
Wash lint producers and lint collectors
separately.
Caring before loading.
3
•Combine large and small items in a load. Load
large items rst.
•Large items should not be more than half the
total wash load. Do not wash single items. This
may cause an unbalanced load. Add one or two
similar items.
•Check all pockets to make sure that they are
empty. Items such as nails, hair clips, matches,
pens, coins and keys can damage both your
washing machine and your clothes.
•Close zippers, hooks and strings to make sure
that these items don’t snag on other clothes.
•Pre-treat dirt and stains by brushing a small
amount of detergent dissolved water onto stains
to help lift dirt.
•Check the folds of the exible gasket (gray) and
remove any small articles.
•Check inside the drum and remove any items
from a previous wash.
•Remove any clothing or items from the exible
gasket to prevent clothing and gasket damage.
17
Adding Cleaning Products
Detergent Dosage
•Detergent should be used according to the instruction
of the detergent manufacturer and selected according
to type, colour, soiling of the fabric and washing
temperature.
•If too much detergent is used, too many suds can
occur and this will result in poor washing results or
cause heavy load to the motor.
•If you wish to use liquid detergent follow the guidelines
provided by the detergent manufacturer.
•You can pour liquid detergent directly into the main
detergent dispenser if you are starting the cycle
immediately.
•Do not use liquid detergent if you are using Time
delay, or if you have selected Pre Wash, as the liquid
may harden.
•If too many suds occur, reduce the detergent amount.
•Detergent usage may need to be adjusted for water
temperature, water hardness, size and soil level of the
load. For best results, avoid oversudsing.
•Refer to the label of the clothes, before chooseing the
detergent and water temperature:
•When using the washing machine, use designated
detergent for each type of clothing only:
– General powdered detergents for all types of fabric
– Powdered detergents for delicate fabric
– Liquid detergents for all types of fabric or
designated detergents only for wool
•For better washing performance and whitening, use
detergent with the general powdered bleach.
•Detergent is ushed from the dispenser at the
beginning of the cycle.
•Do not place or store laundry products, such as
detergent, bleach, or liquid fabric softener, on top of
your washer or dryer. Wipe up any spills immediately.
These products can damage the machine's nish and
controls.
NOTE
•Do not let the detergent harden.
Doing so may lead to blockages, poor rinse
performance or odour.
•Full load : According to manufacturer’s
recommendation.
•Part load : 3/4 of the normal amount
•Minimum load : 1/2 of full load
Adding Detergent and Fabric Softener
Adding detergent
•Main wash only →
•Pre wash+Main wash →
NOTE
•Too much detergent, bleach or softener may
cause an overow.
•Be sure to use the appropriate amount of
detergent.
Adding fabric softener
•Do not exceed the maximum ll line. Overlling can
cause early dispensing of the fabric softener, which
may stain clothes. Close the dispenser lid slowly.
NORMALNORMAL
18
ENGLISH
•Do not leave the fabric softener in the detergent
dispenser for more than 2 days (Fabric softener may
harden).
•Softener will automatically be added during the last
rinse cycle.
•Do not open the dispenser lid when water is being
supplied.
•Solvents (benzene, etc) should not be used.
NOTE
•Do not pour fabric softener directly on the clothes.
Adding water softener
•A water softener, such as Anti-limescale (e.g. Calgon)
can be used to cut down on the use of detergent in
extremely hard water areas. Dispense according to
the amount specied on the packaging. First add
detergent and then the water softener.
•Use the quantity of detergent required for soft water.
CAUTION
•To avoid injury, do not place ngers under the lid
or between the lid and the top plate when pressing
or sliding the detergent dispenser lid open or
closed.
MAX
NORMAL
Using tablet
Open the door and put tablets into the drum.
1
Load the laundry into the drum and close the door.
2
19
Control Panel
Power button
•Press the
machine on.
•Press and hold the
to turn the washing machine off.
Start/Pause button
•This
wash cycle or pause the wash cycle.
•If a temporary stop of the wash cycle is needed,
press the
Display
•The display shows the settings, estimated
time remaining, options, and status messages.
When the product is turned on, the default
settings in the display will illuminate.
•The display shows estimate time remaining.
While the size of the load is being calculated
automatically, blinking or ‘Detecting’
appears.
Power
Start/Pause
Start/Pause
button to turn the washing
Power
button for 1 second
button is used to start the
button.
Programme Button
•Programmes are available according to laundry
type.
•Lamp will light up to indicate the selected
programme.
Options
•This allows you to select an additional cycle
and will light when selected.
•Use these buttons to select the desired cycle
options for the selected cycle.
20
Programme Table
Washing Programme
ENGLISH
ProgrammeDescriptionFabric Type
Coloured fast garments (shirts,
nightdresses, pajamas, etc) and normally
soiled cotton load (underwear).
Cotton, underwear, pillow covers, bed
sheets, baby wear
Normal
Carga Pesada
(Heavy Duty)
Ropa de Cama
(Bedding)
Planchado
Permanente
(Perm.Press)
Toallas
(Towels)
Sanitario
(Sanitary)
Allergiene™
Bright Whites™
Provides better performance by combining
various drum motions.
This cycle is for washing heavily soiled
laundry though more powerful tub rotation.
This cycle is for washing blankets or bulky
items.
This cycle is for washing items such as
wrinkle-free clothes or tablecloths to
minimize wrinkles.
This cycle is for washing towels.TowelsRating
Washes laundry in a hot cycle.
Removes allergens such as house
mites, pollen, and cat fur.
This cycle is for washing white items only.White Fabrics
Maximum
Load
Rating
Less than
8.5 kg
1 item
Less than
8.5 kg
Less than
8.5 kg
Delicados
(Delicates)
Ropa Deportiva
(Sports Wear)
This cycle is for washing lingerie or sheer
and lacy clothes which can easily be
damaged.
This cycle is suitable for sports wear such
as jogging clothes and running wear.
Dress shirts/blouses, nylons, sheer or lacy
garments
Coolmax, Gore-tex, Fleece and Sympatex.
Less than
4.5 kg
Less than
8.5 kg
21
ProgrammeDescriptionFabric Type
Coloured laundry which is lightly soiled.
Lavado Rápido
(Speed Wash)
This cycle provides fast washing time for
small loads and lightly soiled clothes.
CAUTION : Use less than 20 g of
detergent (for 2.0 kg load) otherwise
detergent may remain on the clothes.
Maximum
Load
Less than
4.5 kg
Enjuague+
Centrifugado
(Rinse+Spin)
Limpieza de Tina
(Tub Clean)
Ciclo Descargado
(Downloaded Cycle)
Use for laundry that need rinsing only of to
add rinse-added fabric softener to laundry
This cycle is designed to remove mildewy or musty smell.
For downloadable cycles. If you did not download any cycles, the default is Small Load.
NOTE
•Neutral detergent is recommended.
Normal fabrics which can be washable.Rating
22
Drying Programme
ProgrammeDescriptionFabric Type
ENGLISH
Turbo
Aire (Air)
Time 30 min.
Time 60 min.
Time 90 min.
Time 120 min.
Time 150 min.
Select this cycle to reduce cycle time
during the drying cycle.
Select this cycle to use less water
compared to the Turbo dry cycle during
drying.
You can change the drying time
according to the maximum load.
Cotton or linen fabrics such as cotton towels, t-shirts, and linen
laundries.
Cotton, towel
NOTE
•Select maximum selectable spin speed of washing programme to ensure drying results.
•Where the amount of laundry to be washed and dried in one programme does not exceed the maximum weight
permitted for the drying programme, washing and drying in one continuous sequence is recommended.
23
Extra Options
Programme
Normal
Carga Pesada
(Heavy Duty)
Ropa de Cama
(Bedding)
Planchado
Permanente
(Perm.Press)
Toallas
(Towels)
Sanitario
(Sanitary)
Allergiene™
Bright
Whites™
Reserva
(Time
Delay)
Steam
Añadir
Prendas
(Add
Garments)
Turbo
Wash™
Cold
Wash
Enjuague
Extra
(Extra
Rinse)
●●●●**●●●
●●●●**●●●
●●●●●●●
●●●**●●●
●●●●●●
●●●●●●
●●*●●●
●●●●●●
Prelavado
(Pre
Wash)
Delicados
(Delicates)
Ropa Deportiva
(Sports Wear)
Lavado Rápido
(Speed Wash)
Enjuague+
Centrifugado
(Rinse+Spin)
Limpieza de Tina
(Tub Clean)
Ciclo Descargado
(Downloaded
Cycle)
* : This option is automatically included in the cycle and can not be deleted.
** : This option is automatically included in the cycle and can be deleted.
●●●●●
●●●
●●●●●
●●●
●●*
●●●●●
24
Operating Data
ProgrammeWash Temp.Spin SpeedSoil Level
ENGLISH
Normal
Carga Pesada
(Heavy Duty)
Ropa de Cama
(Bedding)
Planchado Permanente
(Perm.Press)
Toallas
(Towels)
Más Caliente (Extra Hot)
Caliente (Hot)
Tibia* (Warm*)
Fria (Cold)
Más Fria (Tap Cold)
Más Caliente (Extra Hot)
Caliente (Hot)
Tibia* (Warm*)
Fria (Cold)
Más Fria (Tap Cold)
Caliente (Hot)
Tibia* (Warm*)
Fria (Cold)
Más Fria (Tap Cold)
Caliente (Hot)
Tibia* (Warm*)
Fria (Cold)
Más Fria (Tap Cold)
Caliente (Hot)
Tibia* (Warm*)
Fria (Cold)
Más Fria (Tap Cold)
Muy Alto (Extra High)
Fuerte* (High*)
Medio (Medium)
Bajo (Low)
Muy Alto* (Extra High*)
Fuerte (High)
Medio (Medium)
Bajo (Low)
Medio* (Medium*)
Bajo (Low)
No Centrifugar (No Spin)
Fuerte (High)
Medio* (Medium*)
Bajo (Low)
Muy Alto* (Extra High*)
Fuerte (High)
Medio (Medium)
Bajo (Low)
No Centrifugar (No Spin)
Muy Sucia (Heavy)
Normal* (Normal*)
Ligero (Light)
Muy Sucia* (Heavy*)
Normal (Normal)
Ligero (Light)
Muy Sucia (Heavy)
Normal* (Normal*)
Ligero (Light)
Muy Sucia (Heavy)
Normal* (Normal*)
Ligero (Light)
Muy Sucia (Heavy)
Normal* (Normal*)
Ligero (Light)
Sanitario
(Sanitary)
Allergiene™
Más Caliente* (Extra Hot*)
-
Muy Alto (Extra High)
Fuerte* (High*)
Medio (Medium)
Bajo (Low)
No Centrifugar (No Spin)
Muy Alto (Extra High)
Fuerte* (High*)
Medio (Medium)
Bajo (Low)
No Centrifugar (No Spin)
Muy Sucia (Heavy)
Normal* (Normal*)
Ligero (Light)
-
25
ProgrammeWash Temp.Spin SpeedSoil Level
Bright Whites™
Delicados
(Delicates)
Ropa Deportiva
(Sports Wear)
Lavado Rápido
(Speed Wash)
Enjuague+ Centrifugado
(Rinse+Spin)
Caliente* (Hot*)
Tibia (Warm)
Fria (Cold)
Más Fria (Tap Cold)
Tibia (Warm)
Fria* (Cold*)
Más Fria (Tap Cold)
Tibia* (Warm*)
Fria (Cold)
Más Fria (Tap Cold)
Caliente* (Hot*)
Tibia (Warm)
Fria (Cold)
Más Fria (Tap Cold)
Fria* (Cold*)
Muy Alto (Extra High)
Fuerte* (High*)
Medio (Medium)
Bajo (Low)
No Centrifugar (No Spin)
Medio* (Medium*)
Bajo (Low)
No Centrifugar (No Spin)
Medio* (Medium*)
Bajo (Low)
No Centrifugar (No Spin)
Muy Alto* (Extra High*)
Fuerte (High)
Medio (Medium)
Bajo (Low)
No Centrifugar (No Spin)
Muy Alto (Extra High)
Fuerte* (High*)
Medio (Medium)
Bajo (Low)
No Centrifugar (No Spin)
Muy Sucia (Heavy)
Normal* (Normal*)
Ligero (Light)
Muy Sucia (Heavy)
Normal* (Normal*)
Ligero (Light)
Muy Sucia (Heavy)
Normal* (Normal*)
Ligero (Light)
Muy Sucia (Heavy)
Normal (Normal)
Ligero* (Light*)
-
Limpieza de Tina
(Tub Clean)
Ciclo Descargado
(Downloaded Cycle)
Más Fria (Tap Cold)
* : default setting
•Water Temperature: Select the appropriate water temperature for chosen wash cycle. Always follow garment
manufacturer’s care label or instructions when washing.
•If the Turbo Wash™ option is on, you cannot select No Spin as your Spin.
If the Turbo Wash™ option is off, you can select No Spin as your Spin.
---
Caliente (Hot)
Tibia* (Warm*)
Fria (Cold)
Muy Alto (Extra High)
Fuerte* (High*)
Medio (Medium)
Bajo (Low)
No Centrifugar (No Spin)
Muy Sucia (Heavy)
Normal* (Normal*)
Ligero (Light)
26
ENGLISH
Option Cycle
Reserva (Delay Wash)
You can set a time delay so that the washing machine
will start automatically and nish after a specied time
interval.
Press the
1
Select a washing programme.
2
Press the
3
Press the
4
NOTE
•The delay time is the time to the end of the
programme, not the start. The actual running time
may vary due to water temperature, wash load
and other factors.
Power
button.
Reserva
Start/Pause
button and set time required.
button.
Steam
Steam Wash features enhance washing performance
with low energy consumption.
Refresh cycle reduces creases in clothes.
Press the
1
Select steam course.
2
Press the
3
Press the
4
Steam Wash
•For heavily stained clothes, underwear, or baby
clothes.
•Refresh cycle is always Steam Wash.
•Do not use Steam Wash for delicates such as wool,
silk, and easily discoloured clothes.
Power
button.
Steam
button.
Start/Pause
button.
Turbo Wash™
Wash cycle in under 1 hour with energy and water
saving. (based on half of laundry)
Press the
1
Select a washing programme.
2
Press the
3
Press the
4
NOTE
•Turbo Wash™ function of Some courses is
selected automatically.
Power
button.
Turbo Wash™
Start/Pause
button.
button.
27
Añadir Prendas (Add Garments)
Prelavado (Pre Wash)
Use this function to add loads or remove the foreign
material.
Press the
1
Close the door after add loads or remove the
2
foreign material. (e.g. coin or pin etc.)
Press the
3
•Results when choosing
- When the tub is spinning : Tub stops and Door Lock
is off.
- When water temperature in the tub is higher than
45°C :
warning sound for safety.
- When lots of water is in the tub : Door Lock is off
after draining by safe water level.
NOTE
•Open the door when Door Lock is off after
checking the safety.
•Add Garments doesn't work when Tub Cleaning
course is in progress for safety.
•Put the laundry into the tub completely. Laundry
caught in between door closing part can damage
door packing (rubber part) and might cause failure.
Añadir Prendas
Start/Pause
Add Garments
button.
button.
Add Garments
is not available with short
during cycles.
If the laundry is heavily soiled, the Pre Wash cycle is
recommended.
Press the
1
Select a washing programme.
2
Press the
3
Press the
4
Power
button.
Prelavado
Start/Pause
button.
button.
Enjuague Extra (Extra Rinse)
Add an extra rinse cycle to the default rinse cycle.
Press the
1
Select a washing programme.
2
Press the
3
Press the
4
Power
button.
Enjuague Extra
Start/Pause
button.
button.
28
ENGLISH
Temp. (Temperature)
Set the water temperature for the wash cycle. Set the
appropriate temperature, as specied in the fabric
care label.
Press the
1
Select a washing programme.
2
Press the
3
desired water temperature:
Press the
4
Power
button.
Temp.
button repeatedly to select the
Start/Pause
button.
Centrifugado (Spin)
You can set the desired spin speed.
Use this feature properly according to the characteristics
of the load.
•Spin Only
Press the
1
Select a washing programme.
2
Power
button.
Suciedad (Soil Level)
You can wash your laundry more thoroughly by
setting the proper soil level on the washing machine.
Press the
1
Select a washing programme.
2
Press the
3
soil level.
Press the
4
NOTE
•This feature needs more time for heavily soiled
loads or less time for lightly soiled loads.
Power
button.
Suciedad
Start/Pause
button repeatedly to select a
button.
Cold Wash
This option saves energy by using cooler water while
increasing the wash and rinse times to maintain wash
performance.
1
Press the
Power
button.
Press the
3
the desired spin speed.
Press the
4
NOTE
•The Centrifugado button also activates the
Drain&Spin cycle to drain the tub and spin clothes;
for example, if you want to remove clothes before
the cycle has ended.
•To use Drain&Spin, press the Power button, then
press the Centrifugado button repeatedly to
select a spin speed. Press the Start/Pause button
to begin.
Centrifugado
Start/Pause
button repeatedly to select
button.
Select a washing programme.
2
Press the
3
Press the
4
NOTE
•Wash time will increase up to several minutes with
the Cold Wash option.
•For best wash results, only wash small loads (less
than 8 lb) with the Cold Wash option.
Cold Wash
Start/Pause
button.
button.
29
Fresh Care
Bloqueo Para Niños (Child Lock) ( )
Use this function when you won't be able to take out
your clothes immediately after the wash cycle ends.
Press the
1
Select a washing programme.
2
Press and hold the
3
The light ( ) will turn on.
Press the
4
NOTE
•After the cycle ends, the drum will tumble
periodically for up to 19 hours to prevent wrinkles.
Press the Start/Pause or Power button at any
time to unload laundry.
Power
button.
Steam
Start/Pause
button for 3 seconds.
button.
Luz del Tambor (Drum Light)
The drum is equipped with a white LED light that
illuminates when the washer is turned on. This light
automatically turns off when the door is closed and the
cycle starts.
Select this function to lock the buttons on the control
assembly to prevent tampering.
Locking the control panel
Press and hold the
1
seconds.
A beeper will sound, and ‘ ’ will appear on the
2
display.
When the child lock is set, all buttons are locked
except the
NOTE
•Turning off the power will not reset the child lock
function. You must deactivate child lock before
you can access any other functions.
Unlocking the control panel
Press and hold the
•A beeper will sound and the remaining time for the
current programme will reappear on the display.
Power
Prelavado
button.
Prelavado
button for 3
button for 3 seconds.
Press the
1
Select a washing programme.
2
Press the
3
Press and hold the
4
seconds.
•The drum light will turn off automatically after four
minutes.
30
Power
button.
Start/Pause
Enjuague Extra
button.
button for 3
Loading...
+ 133 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.