LG WD-1275QDT Owner’s Manual
OWNER’S MANUAL
WASHING
MACHINE
Before beginning installation , read these instructions carefully.
This will simplify installation and ensure that washer is installed
correctly and safely, Leave these instructions near the washer after
installation for future reference.
WD-1475TDT
WD-1275QDT
WD-1480TDT
*MFL67322830*
Rev. : 00(11T15)
www.lg.com
Contents
Contents..........................................
Product Features.............................
Important safety instructions
Important safety instructions...............
Basic safety precautions..........................
Safe these instructions.............................
Specifications..................................
Installations
Removing packing..........................................
Removing transit bolts.................................
Installation place requirements... 9
Connecting water supply hose............
Installation of drain hose.......................
Leveling............................................................
How to use washer
Operating washing machine..................
Care before washing................................
Washing program table...........................
Extra options...............................................
Operating data............................................
Control panel................................................
Options.............................................................
-Medic Rinse..................................................
-Pre Wash......................................................
-Intensive.......................................................
-Crease Care.................................................
-Time Delay....................................................
-Spin..................................................................
-Rinse Hold....................................................
-Temp.................................................................
Other functions..........................................
2
3
4
5
6
7
8
8
11
13
14
16
17
18
19
20
21
22
22
22
22
22
22
23
23
23
23
Thank you for buying a LG Fully
Automatic Washing Machine.
Please read your owner’s manual carefully,
it provides instruction on safe installation,
use and maintenance.
Retain it for future reference.
Record the model and serial number of
your washing machine.
Model No.
Serial No.
Date of Purchase
-Spin only........................................................
Child Lock.......................................................
Beep On/Off..................................................
Tub Clean........................................................
Door Lock & Detecting.............................
Adding detergent
Adding detergent and fabric
softener..
Maintenance
The water inlet filter.................................
The drain pump filter.................................
Dispenser drawer........................................
The washing drum.....................................
Cleaning your washer...............................
Cold conditions...........................................
Troubleshooting guide
Diagnosing problems....................................
Error messages...........................................
Using Smart DiagnosisTM.............................
Terms of Warranty
23
24
24
25
25
26
28
29
30
31
31
31
32
34
35
36
2
Product Features
Inverter Direct Drive system
■
The advanced Brushless DC motor directly drives the drum without belt and
pulley.
6 Motion
■
Washer is able to perform various drum actions or a combination of different
actions depending on the wash program selected.
Combined with a controlled spin speed and the ability of the drum to rotate
both left and right, the wash performance of the machine is greatly improved,
giving you perfect results every time.
Protection against creases
■
With the alternating rotation of the drum, creasing is minimized.
Built-in heater
■
Internal heater automatically heats the water to the best temperature on
selected cycles.
More economical with Intelligent Wash system
■
Intelligent Wash System detects the size of load and water temperature,
and then determines the optimum water level and washing time to minimize
energy and water consumption.
추가선택 예약
Child Lock
■
The Child Lock prevents children from pressing any button to change the
settings during operation.
Low noise speed control system
■
By sensing the amount of load and balance, it evenly distributes load to
minimize the spinning noise level.
Auto Restart
■
Auto Restart allows the program to restart all by itself in case of power failure.
It does from the stage where it stopped.
3
Important safety instructions
READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION
BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion,
electric shock, or to prevent property damage, injury to persons, or death.
Your Safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always
read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER, WARNING
or CAUTION.
DANGER
You will be killed or seriously injured if you don’t immediately follow instructions.
WARNING
You can be killed or seriously injured if you don’t follow instructions.
CAUTION
You may be slightly injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of
injury, and tell you what can happen if the instructions are not followed
4
Important safety instructions
■ Basic safety precautions
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic
precautions, including the following:
•
Before installation, check exterior damages.
If it has, do not install.
• Do not install or store the washer where it
will be exposed to the weather.
• Do not tamper with controls.
•
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance
instructions or published user-repair
instructions that you understand and have
the skills to carry out.
• Keep the area underneath and around your
appliances free of combustible materials such
as lint, paper, rags, chemicals, etc.
•
The appliance is not intended for use by
young children or infirm persons without
supervision. Do not allow children to play on,
with, or inside this or any other appliance.
•
Keep small animals away from the appliance.
• Do not leave the washer door open.
An open door could entice children to hang on
the door or crawl inside the washer.
• Never reach into washer while it is moving.
Wait until the drum has completely stopped.
•
The laundry process can reduce the flame
retardant of fabrics. To avoid such a result,
carefully follow the garment manufacturer’s
wash and care instructions.
• Do not wash or dry articles that have been
cleaned in, washed in, soaked in, or spotted
with combustible or explosive substances
(such as wax, oil, paint, gasoline, degreasers,
dry-cleaning solvents, kerosene, etc.) which
may ignite or explode. Oil may remain in the
tub after a whole cycle resulting in fire during
drying. So, do not load oiled clothes.
• Do not slam the washer door closed or try
to force the door open when locked. This
could result in damage to the washer.
•
When the machine runs high temperature, the
front door may be very hot. Don’t touch it.
•
To minimize the possibility of electric shock,
unplug this appliance from the power supply
or disconnect the washer at the household
distribution panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
•
When unplugging power cord, do not pull out
by grasping the cord. Otherwise, the power
cord may be damaged.
•
Never attempt to operate this appliance
if it is damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
5
Important safety instructions
■ Basic safety precautions
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic
precautions, including the following:
• Before discarding an old machine unplug it.
Render the plug useless. Cut off the cable
directly behind the appliance to prevent
misuse.
•
When a product was under water, Please
call service center. There is a risk of electric
shock and fire.
•
Appliance connected to the water mains
using new hose-sets. Old hose- sets should
not be reused.
•
To reduce the risk of personal injury, adhere to
all industry recommended safety procedures
including the use of long sleeved gloves and
safety glasses. Failure to follow all of the
safety warnings in this manual could result in
property, personal injury or death.
•
Do not push down the door excessively, when
washer door open.
This could topple over the washer.
■ Save these instructions
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the
risk of electric shock by providing a path of least resistance for electric current.
This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinance.
• Do not use an adapter this will defeat the grounding plug.
• If you don’t have the proper outlet, consult an electrician.
WARNING
Improper connection of the equipment-grounding conductor can result in electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet,
have a proper outlet installed by a qualified electrician.
6
Specifications
Drawer
(For detergent
and fabric
softener)
Power plug
•
If the supply cord
is damaged,it must
be replaced by the
manufacturer or its
service agents or a
similarly qualified
person in order to
avoid a hazard.
Control panel
Drum
Door
Lower cover
Adjustable feet
■ Name : Front loading washing machine
■ Power supply : 230 V~, 50 Hz
■ Size : 600 mm(W) X 550 mm(D) X 850 mm(H)
■ Weight : 59 kg
■ Max. Watt : 2100 W
■ Wash capacity : Refer to the Rating Label
■ Permissible water pressure : 100 - 1000 kPa (1.0 - 10.0 kgf / cm2)
* The appearance and specifications may vary without notice to improve the quality of the unit
■ Accessories
Inlet hose (1 EA) Option : Hot / Cold (2 EA) Spanner
Drain pump filter
Drain plug
Lower cover cap
7
Installation
■ Removing packing
1.
Remove the cardboard box and styrofoam
packing.
2.
Lift the washing machine and remove the base
Washer
Base Packing
Spanner
WARNING
•
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation
! Keep all packaging well away from children.
■ Removing transit bolts
To prevent internal damage during transport, the 4 special bolts are locked. Before operating the washer,
remove the bolts along with the rubber bungs.
If they are not removed, it may cause heavy vibration, noise and malfunction
packing. This will require 2 or more people or
a lifting device.
3. Remove the tape securing the power supply
cord and drain hose.
4. Remove the inlet hoses from the drum.
NOTE
• Keep the spanner provided for future use.
1.
Unscrew the 4 bolts with the spanner supplied.
2. Take out the 4 bolts along with the rubber
bungs by slightly twisting the bung.
NOTE
• Keep the transit bolts for future use.
3. Close the holes with the caps supplied.
Transit bolt
8
Installation
■ Installation place requirements
▶ Location
Washer
approx.
2cm.
▶ Positioning
• Install the washer on a flat hard floor.
• Make sure that air circulation around the washer is not impeded by carpets, rugs, etc.
• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials
under the washer. Do not build the machine into a closed cupboard.
• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an
insulating(85x60cm) covered with aluminum foil on the side facing the cooker or stove,must be
inserted between the two appliance.
• The washer must not be installed in rooms where the temperature can drop below 0°C.
• Please ensure that when the washer is installed, it is easily accessible for a Service Technician in the
event of a breakdown.
• With the washer installed, adjust all four feet using the transit bolt spanner provided ensuring the
appliance is stable, and a clearance of approximately 20 mm is left between the top of the washer
and the underside of any work-top.
• This equipment is not designed for maritime use or for use in a mobile installations such as caravans,
aircraft etc.
• It is also not intended for commercial or outdoor applications, or washing of items such as foot ware,
mats etc.
• Level floor :
Allowable slope under entire washer is 1°.
• Power outlet :
Must be within 1.5 meters of either side of
location of washer. Do not overload the outlet
with more than one appliance.
• Additional Clearance :
For Wall, 10cm:rear / 2cm : right & left side.
Do not place, store or use laundry products on
top of washer at any time.
They can damage the finish or controls.
9
Installation
▶ Electrical connection
• Do not use an extension cord or double adapter.
•
If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly
qualified person in order to avoid a hazard.
• Always unplug the machine and turn off the water supply after use.
• Connect the machine to an earthed socket in accordance with current wiring regulations.
• The appliance must be positioned so that the plug is easily accessible.
• Repairs to the washing machine must only be carried out by qualified personnel.
• Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact
your local service center
• Do not install your washing machine in rooms where temperature below freezing may occur. Frozen
hoses may burst under pressure. The reliability of the electronic control unit may be impaired at
temperatures below freezing point.
• If the appliance is delivered in the winter months and temperatures are below freezing : Place the
washing machine at room temperature for a few hours before putting it into operation
CAUTION
CAUTION concerning the Power cord
• Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
• Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these
conditions could result in an electric shock or fire.
•
Periodically examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
•
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
If the appliance is supplied from a cord extension set or an electrical portable outlet device, The
cord extension set on electrical portable outlet device must be positioned so that it is not subject
to splashing or ingress of moisture.
CAUTION
• The appliance is not intended for use by young children or infirm persons without supervision.
• Young children should be supervised to ensure that they do not play with appliance.
10
Installation
■ Connecting water supply hose
• Water supply pressure must be between 100 - 1000 kPa (1.0 - 10.0 kgf / cm2).
• Do not strip or crossthread when connecting inlet hose to the valve.
•
If the water supply pressure is more than 1000 kPa, a water pressure reduction device should be installed.
• Periodically check the condition of the hose and replace the hose if necessary.
▶ Step 1 : Check rubber seal inlet hose
•
Two rubber seals are supplied with the water inlet hoses.
They are used for preventing water leaks.
Make sure the connections to taps are
sufficiently tight.
Hose
connector
Rubber
seal
▶ Step 2 : Connect hose to water tap
Type - A : Connecting Screw-type hose to tap with thread
• Do not use pliers,multi grips or leverage tools
to tighten. Hand tighten only. Use a cloth if
necessary.
•
Screw the hose connector onto water supply tap.
Type - B : Connecting Screw-type hose to tap without thread
Upper
connector
Fixing screw
Rubber
packing
Plate
Water supply
hose
1. Unscrew the adapter ring plate and the 4
adapter retaining screws.
2. Push the adapter onto the end of the tap
so that the rubber seal forms a watertight
connection. Tighten the adapter ring plate
and the 4 screws.
3.
Push the water supply hose vertically upwards
so that the rubber packing within the hose
can adhere completely to the tap and then
tighten it by screwing it to the right.
11
Installation
Type - C : Connecting one touch type hose to tap without thread.
1.
Unscrew the adapter ring plate and the 4
adapter retaining screws.
2.
Ring plate
Guide plate
Latch plate
Remove the guide plate if the tap is too large
to fit the adapter.
3. Push the adapter onto the end of the tap
so that the rubber seal forms a watertight
connection. Tighten the adapter ring plate
and the 4 screws.
4.
Pull the connector latch plate down, push the
inlet hose onto the adapter, and release the
connector latch plate. Make sure the adapter
locks into place
NOTE
•
After connecting inlet hose to water tap,
turn on the water tap to flush out foreign
substances (dirt, sand or sawdust) in the
water lines. Let water drain into a bucket,
and check the water temperature.
▶ Step 3 : Connect hose to washer
• Make sure that there are no kinks in the hose
and that they are not crushed.
▶When your washer has two inlet valves
• The Inlet hose which has red connector is for
the hot water tap.
• When using warm or hot washes, Energy can
be saved by connecting the hot water hose to
a hot water supply.
NOTE
• After completing connection, if water leaks from the hose, repeat the same steps.
Please use the horizontal tap
Horizontal tap Extension tap Square tap
12
Loading...